series wound dc motor modeling and simulation, considering magnetic, mechanical and electric power...
TRANSCRIPT
![Page 1: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/1.jpg)
Series Wound DC Motor Modeling andSimulation, Considering Magnetic, Mechanicaland Electric Power Losses
B.VIGNESHEdited By
Sarath S Nairwww.technologyfuturae.com
1www.technologyfuturae.com
![Page 2: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/2.jpg)
Contents
Introduction DC Series motor ideal model Series wound DC motor losses Mechnical losses Magnetic losses Electrical losses Additional losses Conclusion References
2www.technologyfuturae.com
![Page 3: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/3.jpg)
Introduction
There are three types of DC motors: shunt wound DC motor, series wound DC motors, compound wound DC motor.
Has relatively high starting torques Has good accelerating torque Have low speed at high loads and high speed at low
loads Under same load conditions rating of series motor
will be less than for a shunt motor
3www.technologyfuturae.com
![Page 4: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/4.jpg)
Diagram of DC series motor (dotted line showing electrical, mechanical and magnetic component)
4www.technologyfuturae.com
![Page 5: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/5.jpg)
SERIES WOUND DC MOTOR IDEAL MODEL here there are no disturbances of any kind are
examined the power losses through the input and output power.
Hence we obtain the following equation Angular velocity ω(τ)= (ξ .k.i(τ).ea+RJ ω(τ - ξ))/
(RJ+ ξ [Rb+k2i2(τ)])
5www.technologyfuturae.com
![Page 6: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/6.jpg)
Armature current
ia(τ)=ea/(R+kω(τ)) Torque
T(τ)=kia2(τ) Mechanical power
Pm(τ)= ω ( τ)*T(τ) Electrical power
Pe(τ)=ea*ia(τ)
6www.technologyfuturae.com
![Page 7: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/7.jpg)
Power loss
Pp(τ)=Pe(τ)-Pm(τ) Efficiency
η (τ)=Pm(τ)/Pe(τ)
7www.technologyfuturae.com
![Page 8: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/8.jpg)
SERIES WOUND DC MOTOR LOSSES
Within the DC motor components energy is exchanged between different sections in these exchange, there are power losses.
Mechanical losses Magnetic losses Electrical losses
8www.technologyfuturae.com
![Page 9: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/9.jpg)
Mechanical losses
the mechanical losses are found in surfaces in contact and constant friction
1.Friction losses in the slip bearings
These losses are due to continuous friction
PRC=0.52dglg√(Vg3 )
Diameter
dg=2.84√(Pm/n) Length
lg=2.5dg Peripheral speed
Vg=(∏.n.dg)/6000
9www.technologyfuturae.com
![Page 10: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/10.jpg)
If the machine has rolling bearings
PRC =150(dg)3n 10-6 the result is multiplied by the number of bearings
PRC= nc.PRC Brush friction power losses PRE
PRE=9.81µePSeVcol
Peripheral speed Vcol=(∏.Dcol.n)/6000 Brushes surface friction Se=∑Brushes surface
10www.technologyfuturae.com
![Page 11: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/11.jpg)
Ventilation Losses
Pv=1.1 V VV2
Cooling of motor is determined by
V=∑losses transformed into heat/1000te The fan speed given by
Vv=(∏.Dv.n)/6000 Mechanical losses of the machine
PMR=PRC+PRE+PV
11www.technologyfuturae.com
![Page 12: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/12.jpg)
Magnetic power loss
Eddy current losses
Pf(t)=w2[ea]2/(12ρ (NA)2 )
12www.technologyfuturae.com
![Page 13: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/13.jpg)
Electrical power losses
Armature copper loss Pcu=R ia2
13www.technologyfuturae.com
![Page 14: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/14.jpg)
Additional losses
In an electric machine there are areas in continuous friction that can contribute to heat emission either by exposing to a long working time and / or by excessive load
The wire conductor resistance R= ρL/A The resistivity is given by ρ= ρα20˚C[1+ α [T-20˚C]] Therefore R(τ)= ρ L/A =L/A ρα20˚C[1+ α [T-20˚C]]
14www.technologyfuturae.com
![Page 15: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/15.jpg)
In developing the mathematical model, there are equations where the resistance and resistivity of the material occurs. Then the following equations are rewritten:
ω(t)= (ξ .k.i(t).ea+R(τ)J ω(τ - ξ))/(R(τ)J+ ξ [R(τ)b+k2i2(t)]) Electrical current
ia(τ)=ea/(R(τ)+kω(t)) Power losses
Pf(t)= w2[e(f)]2 /(12 ρα20˚C[1+ α [T-20˚C]] (NA)2 ) Copper losses
Pcu=R(τ) ia2(τ)
15www.technologyfuturae.com
![Page 16: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/16.jpg)
GENERALIZATION OF A SERIES WOUND DC MOTOR In this section there is a more complete analysis, and
random noises are added aside from considering to the model, considering also the internal losses.
16www.technologyfuturae.com
![Page 17: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/17.jpg)
Angular velocity with deterministic and no deterministic disturbances
17www.technologyfuturae.com
![Page 18: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/18.jpg)
Friction power losses in the slip bearings18www.technologyfuturae.com
![Page 19: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/19.jpg)
Brush friction power loss19www.technologyfuturae.com
![Page 20: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/20.jpg)
Ventilation power loss 20www.technologyfuturae.com
![Page 21: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/21.jpg)
Eddy current power loss21www.technologyfuturae.com
![Page 22: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/22.jpg)
Electrical power loss22www.technologyfuturae.com
![Page 23: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/23.jpg)
Temperature fluctuation23www.technologyfuturae.com
![Page 24: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/24.jpg)
Armature resistance fluctuation24www.technologyfuturae.com
![Page 25: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/25.jpg)
Torque vs angular speed25www.technologyfuturae.com
![Page 26: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/26.jpg)
Torque vs electric current26www.technologyfuturae.com
![Page 27: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/27.jpg)
Angular speed vs electric current27www.technologyfuturae.com
![Page 28: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/28.jpg)
Conclusion
By including the powers losses in the series wound DC motor simulation in addition to the disturbances a series of graphs were obtained which give broader information of the possible behaviour of the system
28www.technologyfuturae.com
![Page 29: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/29.jpg)
References
J. S. Valdez Martínez, P. Guevara López, J. J. Medel Juárez. Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses. Sept.09
B.L.Theraja.A.K.Theraja.A Textbook Electrical Technology.S.Chand and Company ltd.
29www.technologyfuturae.com
![Page 30: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/30.jpg)
Log On to
www.technologyfuturae.com
Technology Futurae
Technical Presentations, Research Reviews, New designs & Developments
![Page 31: Series Wound DC Motor Modeling and Simulation, Considering Magnetic, Mechanical and Electric Power Losses B.VIGNESH Edited By Sarath S Nair](https://reader037.vdocuments.us/reader037/viewer/2022102923/551b5ad7550346d41a8b6509/html5/thumbnails/31.jpg)
THANK YOU
31www.technologyfuturae.com