series vacuum pumps & blowers blower 4307 & 4310ecn 1186 - h 9/17/2012 added (2) -...
TRANSCRIPT
4307 & 4310PRODUCT GUIDE
BLOWERS, PACKAGES & ACCESSORIES
888.814.9191 | nvesalesrep.com
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
Reliable – Efficient – Cost Effective
4310 SERIES 940 CFM
4307 SERIES 560 CFM
Several factory designed and built mounting options available.
MADE IN THE USA
4310 Pro Pak
2 NVE 2016 43 Series Product Catalog | Rev. 16-03
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
nvesalesrep.com
• Tri-lobe design with precision machining• Ballast port cooled for continuous duty at maximum vacuum• Oil-less operation• Installation ready• Approximate overall dimensions;
- 4307 - L 22” x W 10” x H 16”- 4310 - L 25” x W 10” x H 16”
• Designed, built, and supported in the USA
Product Features:
131-4307-LD-B-LOCCW ROTATION
SCALE 1 : 4
DETAIL CSCALE 1 : 2
131-4307-LSCCW ROTATION
SCALE 1 : 4(DIMENSIONS SYMMETRICAL TO LD BLOWER)
C
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2670 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:MEM BOB
10/11/2012PART NO.SHEET
2 131-4307-LD AND LS2 of
1 : 4
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\131-4307-LD & LS.idw
SHEET SIZE D270 LBS
BLOWER, 4307 LOW SHAFT CW AND CCW
.13.47
.250
STAMP DIRECTION AND SERIAL NUMBER INTO HOUSING ASSHOWN
(6.710)
(1.499)(.375)SQ KEY
(1.657)
(2.375)(1.250)
(3.350)
(6.700)
(9.375) (9.805)
1/2-13 UNC - 2B .750
(14.451) (7.326)
(9.750)
(15.813)
(15.813)
(4.000)
3/8-16 UNC - 2B .8754X
OIL FILL PORTDRIVE END9/16" HEX
OIL FILL PORTNON-DRIVE END
9/16" HEX
OIL DRAIN PORTDRIVE END9/16" HEX
OIL DRAIN PORTNON-DRIVE END9/16" HEX
(5.920) BC
1/2-13 UNC - 1B 1.2504X
(4.000)PILOT
(6.915)
(8.875)
(4.688)
(6.541) BC
4307 Blower
43 SeriesHigh Vacuum Tri-lobe Blowers
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Blower Only - CW 131-4307-LD 321 $5995.00
4310 Blower Only - CW 131-4310-LD 321 $6965.00
4310 Blower Only - CCW 131-4310-LS 321 $6965.00
131-4310-LDCW ROTATION
SCALE 1 / 4
131-4310-LSCCW ROTATION
SCALE 1 / 4DIMENSIONS SYMMETRICAL TO LD BLOWER
DETAIL CSCALE 1 / 2
C
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2670 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:BOB
PART NO.SHEET2 131-4310-LD AND LS2 of
1/4
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\131-4310-LD & LS.idw
SHEET SIZE D349 LBS
BLOWER, 4310 LOW SHAFT CW AND CCW
.13 .40.250
STAMP DIRECTION AND SERIAL NUMBER INTO HOUSING ASSHOWN
(6.710)
(1.499)(.375)SQ KEY
(1.657)
(2.375)(1.250)
(3.350)
(6.700)
(12.625) (9.805)
1/2-13 UNC - 2B .750
(17.701) (7.326)
(9.875)
(15.813)
(15.813)
(6.000)(6.313)
1/2-13 UNC - 2B .875
(8.500)
(8.875)
OIL FILL PORTDRIVE END9/16" HEX
OIL FILL PORTNON-DRIVE END
9/16" HEX
OIL DRAIN PORTDRIVE END9/16" HEX
OIL DRAIN PORTNON-DRIVE END9/16" HEX
(5.920) BC
1/2-13 UNC - 1B 1.250
(4.000)PILOT (6.915)
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONE
G 12/1/2010 REMOVED BALLASTCOMPONENTS ECN 1186 -
H 9/17/2012 ADDED (2) - 150-047-003 ECN 1689
K 1/18/2013
CORRECTED DRAWING TOMATCH WHAT SHOP WASUSING. REPLACED 5/16
FENDER WASHER WITH 3/8WASHER, REPLACED (2) - HHCS5/16 X 5/8 WITH HHCS 5/16 X
3/4
ECN 1789
L 4/1/2014ADD BRASS SERIAL NUMBER PLATE, EXPLODE 150-048-001
INTO COMPONENTSECN 1965 -
M 5/12/2015 CHANGED IDLER ROTOR TOB-LOC ECN 2119 -
4310 Blower
3 Rev. 16-03 | NVE 2016 43 Series Product Catalog
nvesalesrep.com
Toll Free 888-814-9191 | P.O. Box 293 | West Granby, CT 06090 USA
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
269/16"
253/16"
253/16"
23/4"
251/2"
43 SeriesHigh Vacuum Tri-lobe Blowers with Manifold
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Manifolded Blower Only - CW 131-4307-LDM 421 $7150.00
4310 Manifolded Blower Only - CW 131-4310-LDM 456 $8100.00
4310 Manifolded Blower Only - CCW 131-4310-LSM 456 $8100.00
• 4-Way pressure/vacuum change over valve • Anti-back spin check valve• Integral final filter with easy access cleaning• 4” hose barbed adjustable porting for intake and exhaust• Ballast port manifolds with barbed tee• Approximate overall dimensions;
- 4307 - L 25” x W 20.5” x H 28.25”- 4310 - L 28” x W 26.75” x H 25.5”
• Designed, built, and supported in the USA
Product Features:
4310 Tri-Lobe Blower
4307 Tri-Lobe Blower
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:MEM
PART NO.SHEET2 131-4307-LDM2 of
1 : 4
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\131-4307-LDM.idw
SHEET SIZE C371 LBS
BLOWER 4307 CW W/INTAKE MANIFOLD
4 NVE 2016 43 Series Product Catalog | Rev. 16-03
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
nvesalesrep.com
Shown:4307 FM GB DR - Ballast Silencer
* See Accessory Options on Page 12; Weights are approximate
4307 PackagesMax Pak - Frame Mount Gearbox Drive
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 FM GB DR Base Unit 147-4307-300 741 $9,250.00
4307 FM GB DR - Ballast Silencer 147-4307-305 869 $9,700.00
4307 FM GB DR - Ballast Silencer w/Round Silencer 147-4307-310 1063 $10,675.00
4307 FM GB DR - Ballast Silencer w/Ultra Silencer 147-4307-315 1100 $11,000.00
4307 FM GB DR - Ballast Silencer w/Moisture Trap 147-4307-320 951 $10,735.00
4307 FM GB DR - Ballast Silencer w/Moisture Trap & Round Silencer 147-4307-325 1145 $11,710.00
4307 FM GB DR - Ballast Silencer w/Moisture Trap & Ultra Silencer 147-4307-330 1182 $12,035.00
• 4307 Tri Lobe Blower complete with manifold and stand• 500 series right angle 1:2 ratio straight cut gearbox• Custom fit silencers and moisture traps• Easily mounts to the outside of the truck• Designed, built, and supported in the USA
• Approximate overall dimensions;- Base Unit - L 42.5” x W 26.5” x H 29.25”- Base w/Silencer - L 42.5” x W 37.25” x H 29.25”- Base w/Silencer & Trap - L 42.5” x W 48.5” x H 31”
Product Features:
5 Rev. 16-03 | NVE 2016 43 Series Product Catalog
nvesalesrep.com
Toll Free 888-814-9191 | P.O. Box 293 | West Granby, CT 06090 USA
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIEDOne place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:MEM
PART NO.SHEET2 147-4307-0062 of
1 : 6
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\147-4307-006.idw
SHEET SIZE D
4307 FRAME MOUNT HYDRAULIC APAPTERONLY W/ MT
30.732
48.455
10.70526.500 31.939.118
32.057
7.085
SAE C FACE MOUNT2 OR 4 BOLT
10.001
7.702
Shown:4307 FM HYD DR - Ballast Silencer w/Moisture Trap
* See Accessory Options on Page 12; Weights are approximate
4307 PackagesMax Pak - Frame Mount Hydraulic Drive
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 FM HYD DR Base Unit 147-4307-335 647 $8,550.00
4307 FM HYD DR - Ballast Silencer 147-4307-340 775 $9,000.00
4307 FM HYD DR - Ballast Silencer w/Round Silencer 147-4307-345 841 $9,975.00
4307 FM HYD DR - Ballast Silencer w/Ultra Silencer 147-4307-350 878 $10,300.00
4307 FM HYD DR - Ballast Silencer w/Moisture Trap 147-4307-355 729 $10,035.00
4307 FM HYD DR - Ballast Silencer w/Moisture Trap & Round Silencer 147-4307-360 923 $11,010.00
4307 FM HYD DR - Ballast Silencer w/Moisture Trap & Ultra Silencer 147-4307-365 960 $11,335.00
• 4307 Tri Lobe Blower complete with manifold and stand• Includes vacuum/pressure relief valves and vacuum gauge• Custom fit silencers and moisture traps• SAE C face hydraulic adaptor• Designed, built, and supported in the USA
• Approximate overall dimensions;- Base Unit - L 32” x W 26.5” x H 29.25”- Base w/Silencer - L 32” x W 37.25” x H 29.25”- Base w/Silencer & Trap - L 32” x W 48.5” x H 31”
Product Features:
6 NVE 2016 43 Series Product Catalog | Rev. 16-03
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
nvesalesrep.com
* See Accessory Options on Page 12; Weights are approximate
43 Series PackagesPro Pak - Frame Mount Gearbox Drive
• 3/8 “ powder coat painted frame• Stainless steel cabinet• Easily accessible service points• Blower flush kit• Internal ballast silencing• Ballast check valve for pressure operation• 500 series right angle 1:2 ratio gearbox
• 4307 - straight cut gear• 4310 - spiral bevelled gear
• Designed, built, and supported in the USA
• Approximate overall dimensions;- Base Unit - L 43.5” x W 35.5” x H 30”- Base w/Silencer - L 43.5” x W 52.25” x H 30”- Base w/Silencer & Trap - L 43.5” x W 62.5” x H 30”
Product Features:
Shown:4307 Pro PakGearbox Drive
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 FM GB DR Enclosed Base Unit 147-4307-400 921 $11,800.00
4307 FM GB DR Enclosed - Ballast Silencer w/Exhaust Silencer 147-4307-405 1147 $12,000.00
4307 FM GB DR Enclosed - Ballast Silencer w/Round Silencer 147-4307-410 1115 $12,775.00
4307 FM GB DR Enclosed - Ballast Silencer w/Ultra Silencer 147-4307-415 1152 $13,100.00
4307 FM GB DR Enclosed - Ballast Silencer w/Moisture Trap 147-4307-420 1003 $12,835.00
4307 FM GB DR Enclosed - Ballast Silencer w/Moisture Trap & Round Silencer 147-4307-425 1197 $13,810.00
4307 FM GB DR Enclosed - Ballast Silencer w/Moisture Trap & Ultra Silencer 147-4307-430 1234 $14,135.00
4310 FM GB DR Enclosed Base Unit 147-4310-400 984 $14,250.00
4310 FM GB DR Enclosed - Ballast Silencer w/Round Silencer 147-4310-410 1178 $15,225.00
4310 FM GB DR Enclosed - Ballast Silencer w/Ultra Silencer 147-4310-415 1215 $15,550.00
1
1
2
2
3
3
4
4
A A
B B
C C
D D
7 Rev. 16-03 | NVE 2016 43 Series Product Catalog
nvesalesrep.com
Toll Free 888-814-9191 | P.O. Box 293 | West Granby, CT 06090 USA
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
* See Accessory Options on Page 12; Weights are approximate
43 Series PackagesPro Pak - Frame Mount Hydraulic Drive
Shown:4310 Pro Pak
Hydraulic Drive
• 3/8 “ powder coat painted frame• Stainless steel cabinet• Easily accessible service points• Blower flush kit• Internal ballast silencing• Ballast check valve for pressure operation• SAE C face hydraulic adaptor• Designed, built, and supported in the USA
• Approximate overall dimensions;- Base Unit - L 33.5” x W 35.5” x H 30”- Base w/Silencer - L 33.5” x W 52.25” x H 30”- Base w/Silencer & Trap - L 33.5” x W 62.5” x H 30”
Product Features:
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 FM HYD DR Enclosed Base Unit 147-4307-435 858 $11,100.00
4307 FM HYD DR Enclosed - Ballast Silencer w/Round Silencer 147-4307-445 1052 $12,075.00
4307 FM HYD DR Enclosed - Ballast Silencer w/Ultra Silencer 147-4307-450 1089 $12,400.00
4307 FM HYD DR Enclosed - Ballast Silencer w/Moisture Trap 147-4307-455 940 $12,135.00
4307 FM HYD DR Enclosed - Ballast Silencer w/Moisture Trap & Round Silencer 147-4307-460 1134 $13,110.00
4307 FM HYD DR Enclosed - Ballast Silencer w/Moisture Trap & Ultra Silencer 147-4307-465 1171 $13,435.00
4310 FM HYD DR Enclosed Base Unit 147-4310-435 921 $13,250.00
4310 FM HYD DR Enclosed - Ballast Silencer w/Round Silencer 147-4310-445 1115 $14,225.00
4310 FM HYD DR Enclosed - Ballast Silencer w/Ultra Silencer 147-4310-450 1152 $14,550.00
8 NVE 2016 43 Series Product Catalog | Rev. 16-03
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
nvesalesrep.com
* See Accessory Options on Page 12; weights are approximate
4307 PackagesMax Pak - Top Mount
• 3/8 “ powder coat painted frame• Easily accessible service points• Blower flush kit• Integral horizontal exhaust silencer• Two drive systems to choose from:
- SAE C face hydraulic adaptor- Fully adjustable belt drive
• Approximate overall dimensions;- Hydraulic - L 56.25” x W 34” x H 41.25”- Belt Drive - L 56.25” x W 37.25” x H 66”
• Designed, built, and supported in the USA
Product Features:
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Top Mount Hydraulic Drive w/Ultra Silencer 147-4307-370 980 $11,250.00
4307 Top Mount Belt Drive w/Ultra Silencer 147-4307-375 1132 $12,700.00
4307 Max Pak - Top Mount Hydraulic Drive
4307 Max Pak - Top Mount Belt Drive
9 Rev. 16-03 | NVE 2016 43 Series Product Catalog
nvesalesrep.com
Toll Free 888-814-9191 | P.O. Box 293 | West Granby, CT 06090 USA
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
* See Accessory Options on Page 12; Weights are approximate
43 Series PackagesPro Pak - Top Mount
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Top Mount Hydraulic Drive 147-4307-470 1469 $12,000.00
4307 Top Mount Hydraulic Drive w/Moisture Trap & Cyclone 147-4307-475 1944 $14,250.00
4307 Top Mount Belt Drive 147-4307-480 1570 $13,450.00
4307 Top Mount Belt Drive w/Moisture Trap & Cyclone 147-4307-485 2045 $15,600.00
4310 Top Mount Hydraulic Drive 147-4310-470 1539 $13,000.00
4310 Top Mount Hydraulic Drive w/Moisture Trap & Cyclone 147-4310-475 2483 $15,250.00
4310 Top Mount Belt Drive 147-4310-480 1640 $14,450.00
4310 Top Mount Belt Drive w/Moisture Trap & Cyclone 147-4310-485 2584 $16,600.00
• 3/8 “ powder coat painted frame• Stainless steel cabinet• Easily accessible service points• Blower flush kit• Integral horizontal exhaust silencer• Two drive systems to choose from:
- SAE C face hydraulic adaptor- Fully adjustable belt drive
• Designed, built, and supported in the USA
Product Features:
Shown:4310 Pro Pak - Top Mount Belt Drive
10 NVE 2016 43 Series Product Catalog | Rev. 16-03
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
nvesalesrep.com
* See Accessory Options on Page 12
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIEDOne place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:REC
PART NO.SHEET2 147-4307-4901 of
1:6
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\147-4307-490.idw
SHEET SIZE D
4307 BELLY MOUNT TRAILER PKG HYDRAULICDRIVE ENCLOSED
26 1/8"
58 15/16"
57"44 3/8"
5"
13 7/8"
11 11/16"
23 1/4"
5 1/8"
56"
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/1/2016 ISSUED TO PRODUCTION ECN2224B 3/24/2016 MODIFIED BOM PER AS-BUILT ECN2246
43 Series PackagesBelly Mount Trailer Packages
• 3/8 “ powder coat painted frame• Stainless steel cabinet• Easily accessible service points• Blower flush kit• Integral horizontal exhaust silencer• SAE C face hydraulic adaptor for wet kit• Approximate overall dimensions; L 59” x W 57” x H 26.25”• Designed, built, and supported in the USA
Product Features:
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Belly Mount HYD DR Trailer Package 147-4307-490 1420 $12,000.00
4310 Belly Mount HYD DR Trailer Package 147-4310-490 1450 $13,000.00
11 Rev. 16-03 | NVE 2016 43 Series Product Catalog
nvesalesrep.com
Toll Free 888-814-9191 | P.O. Box 293 | West Granby, CT 06090 USA
Vacuum Pumps & Blowers
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
* See Accessory Options on Page 12
43 Series PackagesDiesel Engine Drive
• 3/8 “ powder coat painted frame• Stainless steel cabinet• Easily accessible service points• Blower flush kit• Integral horizontal exhaust silencer• Approximate overall dimensions; L 8’ x W 6’ 2” x H 6’ 7”• Designed, built, and supported in the USA
Product Features:
PRODUCT DESCRIPTION PART NUMBER WEIGHT MSRP
4307 Diesel Engine Drive 147-4307-495 ––– $30,000.00
4310 Diesel Engine Drive 147-4310-495 ––– $34,000.00
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIEDOne place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:MEM
PART NO.SHEET1 PROTOTYPE 11 of
APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1183 4310 ProPak Skid
Mount\147-4310-050 RUS\116-EDR-4310 RUS-1.idw
SHEET SIZE C
PROTOTYPE 1
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA
5'-6 11/16"
8'-0"6 3/8"
6'-6 3/4"
6'-1 1/16"
1'-2 5/8"
2'-6 3/4"
12 NVE 2016 43 Series Product Catalog | Rev. 16-03
nvesalesrep.com
North America’s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment
43 Series PackageAccessories
Grit Ridder 600 - Part #222-600-2Grit Ridder 900 - Part #222-900-1• Cyclonic action removes grit and debris from airflow• Flanged center for optimum adjustability• 4307 will use Part #222-600-2
- 4” NPT Inlet and Outlet- Approximate dimensions - 18.5”x13”x45”- Approximate weight 154 lbs
• 4310 will use Part #222-900-1 - 4” NPT Inlet with 4” ANSI Flange Outlet
- Approximate dimensions - 21”x15”x51”- Approximate weight 240 lbs
222-600-2
222-600-2
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:terryr
PART NO.SHEET3 222-600-2-F2 of
1 : 5
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\222-600-2.idw
SHEET SIZE C
CYCLONE 607 4" PLUMBING
1'- 3/4"
3'-7 7/16"
7 1/8"
3 5/8"
1'-2 7/8"
1'-6 5/16"
2" FNPT 4" MNPT
2" MNPT
20.810
3 1/8"HOLE IN LID
4"
4 5/8"HOLE IN LID
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ± 1/8Two places (.XX) ± 3/32Three places (.XXX) ± 1/16Angles ± 1°Remove all weld spatter after welding.All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
900 CFM CYCLONEMATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:JGP
PART NO.SHEET3 222-900-12 of
1 : 8
CARBON STEEL
SHEET SIZECAD FILE LOCATION: I:\Engineering\CAD - Production\222-900-1.idw APPROX. WT. 190 LBS
C
50 7/16"
9 1/4"
4" MNPT
35 9/16"
14 7/8"
14 7/8"
21 13/16"
4 11/16"
41 15/16"
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 5/6/11 ADDED MOUNTING DIMENSIONS SHT 2 BOB -
B 10/1/12
UPDATED MODEL, MOVED TO CAD PROD ECN 1714
C 8/8/13ADDED FLANGE, REMOVED FEET, ADDED
2" COUPLER TO TOP, REMOVED LUBE NUTS FROM TOP
ADT -
D 9/19/2013
UPDATED HOLE SIZE ON TOP DISHEDHEAD ADT -
E 4/16/2014 CHANGED 428-20125-1C TO 428-0202-1C ECN 1975 -
F 8/6/2014
REVISED CLEAN OUT COUPLER ANGLE, INCREASE PIPE LENGTH (222-900-1-10), REVISED GUSSETS (222-900-1-11 & -12)
ECN 2046
G 10/20/2015
REPLACED THREADED PIPE W/ 4" ANSIFLANGE ECN 2192
8 1/2"
21"
14 7/8"
Round Silencer - Part #224-4310-03• Stainless steel internals and carbon steel shell• Installs anywhere, in any position• 4” ANSI flanged fittings• Approximate dimensions - 48.5”x14.25”• Approximate weight 194 lbs• Designed to work with the 4307 & 4310
Ultra Silencer - Part #224-360-002• Custom fit for extremely quiet operation• Stainless steel construction• Universal design with multiple porting options• Top and bottom flanged for many mounting options• Approximate dimensions - 27”x12”x23”• Approximate weight 243 lbs• Designed to work with the 4307 & 4310
Horizontal Moisture Trap - Part #218-140-001• Mounts to truck frame• Stainless steel construction• 4” TTMA flanged fittings• 2” drain valve• Lube Nuts included• Approximate dimensions - 30”x17”x25”• Approximate weight 97 lbs• Designed to work with the 4307 & 4310
Aluminum Moisture Trap - Part #218-001-003
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIEDOne place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:ADT
PART NO.SHEET14 218-140-0011 of
1 : 4
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\218-140-001.idw
SHEET SIZE C140 LBS
MT 14" HORIZONTAL
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONE
G 4/3/2014 CHANGE BODY WELDMENT WELD FROM1/4" TO 3/16" ECN 1969 -
H 5/14/14 ADDED LEVER 362-301-2 ECN 1997 -I 5/27/2014 REVISED SIZE OF STRAP INSIDE LID ECN 2007
J 5/27/2015
STAND WAS 19-7/8" WIDE X 17-7/8"HIGH, LID WAS CARBON STEEL, HOLE SIZE FOR PRV COUPLER WAS 2-5/8",
REMOVED PRV FROM PACKAGE
ECN 2139 -
K 2/5/2016 RESIZED 218-140-001-10 DUE TOINTERFERENCE ECN 2227
2'-5 11/16"
2'-1 1/4"
17"
• 2.5” vacuum/pressure gauge• 2” pressure relief• 2” level valve• Includes upper & lower mounting brackets• Approximate dimensions - 26.5”x13”x21.75” • Approximate weight 83 lbs• Designed specifically for the 4307
218-001-003SECTION: A-A
218-001-003
A A
1"
17 3/4"
3"
21 3/4"
8 1/4"
2 3/4"
26 1/2"
5 1/4"
10 1/4"
4"
5 1/8"
13"
©2016 National Vacuum Equipment, Inc. | Revised 06/2016