.... FROM THE LEADER IN THE MUNICIPAL TRACTOR FIELD

FOR MAXIMUM PRODUCTIVITY, SAFETY AND COMFORT

series mt7 - municipal tractor

TRACKLESSVEHICLES.COM

ENGINE STD OPTJohn Deere Model 4045 TFC 03 Emission Rating Tier 4 Final, EU Stage IV Displacement 4.5 LT HP Power Rating 74 HP, 55 KW Torque 224 lb-ft, 304 NM @ 1600 rpm Bore x stroke 4.2 x 5.0 inch Turbocharged

4

Reversing fan 4

Equipped with cold start aid and 1000 watt engine block heater 4

Icons and warning messages displayed on digital dash 4

POWERTRAINSauer Danfoss hydrostatic/electronic transmission and motor 4

Control by electronic foot pedal programmed to control hydrostatic independently or both engine rpm and hydrostatic simultaneously

4

Trackless mechanical transmission with high/low range and neutral 4

High range lockout to prevent operation of attachments in high range 4

10:1 deep reduction planetary transmission. When coupled to mechanical transmission, 4 speed ranges instead of 2 Deep low is 0 to 3m (10ft) / min

4

Dana style model 60 full float axles with new heavy duty alloy spindles and limited slip differentials. 7,000 lb capacity each

4

Electric locking front differential Locker will not engage when in high range

4

SPEEDSLow range 0 to 12 km/h (0 to 8 mph) High range 0 to 30 km/h (0 to 19 mph)

4

Deep low range 0 to 3m (10ft) / min 4

P.T.OFront PTO 1-3/8” 6 spline, 540 rpm 4

Rear PTO 1-3/8” 6 spline, 540 rpm 4

Twin disc over center clutch with electric over hydraulic actuation 4

Reduction box 4:1 4

HYDRAULICS20 gpm hydraulic gear pump driven by timing gears of engine 4

14 gpm hydraulic gear pump, only driven with PTO clutch engaged 4

Joystick control with 8 backlit membrane switches, 4 float position switches also have additional LED indicator lights. Switches colour coded to circuits. Includes FNR (forward/neutral/reverse) switch

4

6 (3 pair) low volume front hydraulic couplers for attachment control 4

2 (1 pair) high volume hydraulic couplers to power attachments requiring approximately 16 gpm

4

2 (1 pair) high volume hydraulic couplers at rear of tractor 4

Variable flow to rear hydraulics by way of rotary dial switch in cab 4

Cartridge type hydraulic filter mounted at highest point in system to allow dry changes

4

Thermostatically controlled bypass from oil cooler for winter start-up 4

Steel hydrostatic lines 4

Low hydraulic oil warning 4

Inching switch outside cab to control lift cylinders for safe pinning of attachments

4

HITCHESFront - Trackless quick hitch with dual lift cylinders 4

Rear - Category 1, 3-point hitch with anti-sway bar 4

BRAKING STD OPT

Hydrostatic dynamic braking programmed for smooth deceleration 4

Hydraulic service brakes on all 4 wheels 4

Service brake application also activates more aggressive hydrostatic braking

4

Mechanical parking brake with warning message displayed on digital dash

4

ELECTRICAL1000 CCA group 31 battery 4

200 amp alternator 4

Main circuit breaker protection and mini blade fuses 4

Battery disconnect switch 4

Switch, wiring and plumbing for spray systems 4

CAN wire to front plug to control engine rpm from external source such as generator/infrared

4

7 prong trailer plug 4

Tow behind sander kit 4

WiFi connected diagnostic 4

STEERINGArticulated steering 35 degrees each way 4

Orbitrol hydraulic motor, hydraulic steering cylinder, tilt steering column 4

Inside turning radius approximately 8-feet 4

High strength spherical bearings for pivot pins and steering pins 4

Bearings and pins greaseable 4

TIRES & WHEELSLT 245/75R x 16 - 10 ply radial winter tire on HD 16” 8-bolt rims 4

31 x 15.50 x 15 - 8 ply turf tires on HD 15” 8-bolt rims 4

Dual 10 ply loader lug tires (8) mounted on 8 rims 4

Calcium fill 4

Calcium fill in tubes 4

LIGHTS4 - Halogen headlights (High/Low beam) 1 - Halogen backup light 2 - Rubber mounted shockproof LED tail lights 1 - Interior dome light

4

Front and rear LED signal lights and 4 way flashers 4

8 LED flashing lights above roof, mounted in HVAC guard 2 on each side for 360 degree visibility, all amber or 4 blue, 4 amber

4

Second rear backup light 4

Additional high mount rear tail lights 4

Headlight, signal (marker) light guards 4

FINISHAll steel components prepped in 5 stage phosphate wash, 2 part epoxy primer with rust inhibitor, 2 part polyurethane automotive top coat

4

Latches, linkages, levers, battery hold down straps and bolts, support rods, striker plate, shifter gate and various small brackets zinc plated

4

Colour highway yellow with black trim, grey/black interior 4

Custom colours to customer specification 4

Trackless MT7 Specifications

CAB FEATURES STD OPT

Certified ROPS cab structure, steel roof with rain gutters 4

Digital dash: tachometer, speedometer, hour meter, fuel level, engine coolant temp., hydraulic oil temp., engine oil pressure, voltmeter

4

7-speed heater defroster 4

HVAC system with auxiliary heat and pressurization 4

2 outside and 1 inside rear view mirror 4

3 point retractable seat belt 4

AM/FM/Bluetooth stereo, dual speakers, external aerial with amplifier 4

Cup holder, cell phone holder, door pocket, storage tray 4

12 volt power point auxiliary outlet for cell phone 12 volt 2-way radio jacks

4

Fire extinguisher 4

First aid kit 4

Gas strut door cylinder and safety strap 4

Tilt steering column with horn, signal lever, hazard button 4

DOT approved tinted tempered safety glass 4

Left and right side slider windows 4

3-speed pantograph wiper and windshield washer 4

Intermittent front wiper, rear wiper and washer 4

Conaflex sound deadening, sound barrier floor matting 4

High back, fabric covered air ride seat 4

Left and right arm rest 4

Full colour digital dash including backup camera when in reverse 4

Slopemeter 4

EXTERIOR FEATURESSteel panels, aluminum top hood, 2 hinged access doors, hinged rear grill 4

Top, rear and side panels removable without tools 4

Heavy duty 10 gauge steel fenders 4

SMV - slow moving vehicle sign 4

Pintle hitch 4

2-5/16” ball hitch 4

Rear license plate bracket and light 4

SAFETY FEATURESNeutral safety start switch 4

Automatic hydraulic power shut off, if rotary mower wings raised 4

Automatic PTO shut down if operator leaves seat 4

Automatic engine shut down if operator leaves seat with shifter not in neutral position

4

Automatic hydraulic power shut off, if operator leaves the seat 4

Application of service brake foot pedal activates more aggressive hydrostatic braking in conjunction with the 4 wheel service brakes

4

Wire finger guard protection from engine fan blades 4

Reflective striping on both sides and rear of tractor 4

Pinch point, danger, caution decals 4

Backup alarm/Backup camera 4

White sound reversing alarm 4

CAPACITIES US METRIC

Fuel Ultra low sulfur diesel ONLY 24.3 gal 94.0 L

Engine oil John Deere Plus-50 II or equivalent 2.25 gal 8.5 L

Coolant Must meet ASTM4985 (GM6038M) 5.68 gal 21.5 L

Hydraulic oil Hydrex MV46 or equivalent 19.8 gal 75.0 L

Differentials 80W90 EP or equivalent 2.4 qt 2.3 L

Reduction gearbox 80W90 EP or equivalent 1.1 qt 1.0 L

Mechanical transmission 80W90 EP or equivalent 3.2 qt 3.0 L

WEIGHTS AND DIMENSIONS US METRIC

Overall length including rear bumper 149.5 in 3797 mm

Height to top of HVAC system 88.0 in 2235 mm

Track width with radial tires 49.5 in 1257 mm

Overall width including fenders 50.5 in 1283 mm

Weight with oils, coolant and full tank of fuel 6900 lbs 3130 kg

ATTACHMENTS REQUIRED

14’ rotary mower Turf Tires

10’ rotary mower Turf Tires

6’ rotary mower Turf Tires

14’ Progressive rotary mower Turf Tires

Front mounted aerator Turf Tires

Stump grinder Turf Tires

74” front mounted flail mower Turf Tires

51” heavy duty boom flail Dual Tires

Asphalt cold planer Deep Reduction

Concrete cold planer Deep Reduction

Leaf loader Duals on Rear

45 kW generator and security fencing

Electric infrared asphalt heater

Front mounted loader 49” or 77” bucket

Line and stencil painter

3, 4, 5 ,6 ,7 or 8’ wide hydraulic driven angle sweeper

48” pickup sweeper

50, 60, or 72” v-plow

5-position folding v-plow

5, 6, 7 or 8’ wide angle snow plow

5’ double trip snow plow

51, 60, 70 or 80” twin auger snowblower

51, 60 or 75” ribbon snowblower

Rear salt and sand spreader with single agitator

Rear salt and sand spreader with triple agitator

Rear tow behind sander Tow Kit

80 gallon (300 liters) water tank and pump system

80 gallon (300 liters) brine spray system

80 gallon (300 liters) 14’ rear-mount spray boom

Trackless MT7 Specifications

The Ribbon Snowblower is the next generation of gearbox snowblower technology from Trackless Vehicles Ltd. Designed for higher output, this snowblower outperforms all others in heavy wet snow and is extremely aggressive when cutting into frozen banks.

Chutes:The Ribbon Snowblowers are able to accept either a sidewalk The Ribbon Snowblowers are able to accept either a sidewalk chute, truck loading chute or our telescopic chute. Telescopic chute is only available for the MT6 or MT7 and is standard on the 75-inch blower.

Cutting edge: 6" x ½" hardened reversibleShear bolts: On augers and main PTO driveSkid shoes: Free pivoting 1½" thick hardened

Housing: 38" high with 3/8" end plates Auger: 1 - 28" dia. ribbon with ice picksImpeller: 7½" x 24" dia. - 5 scoop blades

General Info

Available widths: 51"(1295mm),60"(1524mm) & 75"(1905mm)

TRACKLESS VEHICLESRIBBON SNOWBLOWERS

The snowblower is the go-to attachment of many municipal sidewalk programs. Our twin auger snowblowers are highly efficient, two stage, units capable of clearing heavy snow over 5 feet deep. Many municipalities utilize both our sidewalk chute and truck loading chute, or our telescopic chute. After clearing their sidewalks, they switch to truck loading windrowed snow from the street or from cul de sacs. The manoeuvrability and physical size of the MT and snowblower are less apt to create physical size of the MT and snowblower are less apt to create traffic congestion than larger snowblowers.

Cutting edge: 6" x 3/8" hardened reversibleShear bolts: On auger drive and main PTOAdjustable cutting height: Using top link

Housing: 38" high with 3/8" end platesAuger: 2 - 13" dia. spiral with ice picksImpeller: 6" x 24" - 4 blade

General Info

Available widths: 51"(1295mm),60"(1524mm), 70"(1778mm) & 80"(2032mm)

TRACKLESS VEHICLESTWIN AUGER SNOWBLOWERS

Outside skid shoes: 2Center skid shoe: 1Hydraulic cylinders: 2 - double acting

Plow angle left or right: 30°Plow Trip: While in the blade positionCutting Edges: 2 - 6" x 5/8" thick hardened steel

General Info

The 5-Position Folding V-Plow allows you to build flexibility into your sidewalk maintenance program by offering you the ability to choose between the simplicity of straight blade, the speed of a V-Plow, the maneuverability of a scoop plow or any configuration in between. The left and right wings are powered by independent hydraulic systems allowing you to change your blade arrangement as plowing conditions change. Double acting cylinders provide positive control of the mouldboard acting cylinders provide positive control of the mouldboard position when plowing forward or back-dragging.

TRACKLESS VEHICLES5-POSITION FOLDING V-PLOW

When you need to clear snow from sidewalks in a hurry, the Trackless V-Plow is the ideal attachment to mount to your Trackless MT. Designed specifically for high-speed sidewalk plowing, the V-Plow has an excellent snow rolling and throwing action that cuts effortlessly through light or drifting snow. The tapered nose and body allow it to ride safely over uneven surfaces without damaging the plow or the sidewalk.

Like all of our attachments, the V-Plow is built to last with Like all of our attachments, the V-Plow is built to last with 10-gauge steel blade wings, ¼" reinforcing ribs, abrasion resistant skid shoes and hardened steel cutting edges resulting in an attachment that meets the durability standards Trackless is known for.

Teaming up the Rear-Mount Sidewalk Spreader with the Teaming up the Rear-Mount Sidewalk Spreader with the V-Plow is one of the most popular combinations chosen by our customers.

Available widths: 49"(1245mm) & 72"(1828mm)

TRACKLESS VEHICLESFIXED WING V-PLOWS

An Angle Snowplow is the most cost-efficient snow moving attachment you can mount on your Trackless MT. Nothing beats the economical performance and durability of a straight blade. However, we take the simplicity of a straight blade and make it even better.

Our blade skins are made from 3/16” hot-rolled steel and Our blade skins are made from 3/16” hot-rolled steel and reinforced with 3/8” thick steel ribs. The blade is angled hydraulically from inside the cab of the MT and being a full trip-type plow, tips forward to ride up and over obstructions.  We add abrasion resistant skid shoes and reversible, hardened steel cutting edges which add to the longevity of the attachment.

Available widths: 5'(1524mm),6'(1828mm), 7'(2133mm) & 8'(2438mm)

Cylinders: 2 single acting with cushion valveTrip: Full blade trip, returns to upright position when blade assembly raised

Blade Angling: 30° left or rightCutting Edge: ½" x 6" hardened steelSkid shoes: 2 adjustable

General Info

TRACKLESS VEHICLESANGLE SNOWPLOWS

Plow Tripping:The dual action trip system provides a smoother trip than conventional trip-edge plows and does not require the operator to stop or slow down for the mouldboard and cutting edge to return to the proper position.

Winter can take a toll on sidewalks creating uneven surfaces which makes plowing snow difficult. The Double Trip Sidewalk Plow was built for municipalities that have a significant number of toe trips resulting in constant plow tripping. The double trip system trips the mouldboard 35° and the cutting edge 40° which protects both the plow and the MT from damage when obstacles are encountered.

Cylinders: 2 single actingMouldboard trip springs: 2Cutting edge trip springs: 2

Blade Angling: 30° left or rightCutting Edge: ½" x 6" hardened steelSkid shoes: 2 adjustable

General Info

TRACKLESS VEHICLESDOUBLE TRIP PLOW

Drive: Hydraulic, independent from rear spreaderBlade angling: 30° left or right

Spread width: 41" (1041mm)Capacity: 1/3 cubic yardPlow width: 5' (1524mm)

General Info

The Front-Mount Spreader & Plow is a unique combination of a 5-foot angle plow and sidewalk spreader attached to the front of the Trackless MT. The front spreader drops material in front of the tractor tires and provides additional weight over the front axle resulting in significantly increased traction.When combined with a Rear-Mount Sidewalk Spreader, the When combined with a Rear-Mount Sidewalk Spreader, the tractor can carry different materials in the front and rear of the Trackless MT allowing the operator to be selective with their spread materials. Salt can be applied downtown where merchants do not want sand tracking into their stores and sand can be applied from the second spreader on the remaining residential sidewalks.

TRACKLESS VEHICLESFRONT-MOUNT SPREADER & PLOW

The Rear-Mount Sidewalk Spreader was specifically engineered for sidewalk applications. By dispensing a 41-inch spread width, it is designed to avoid the waste and turf damage often associated with broadcast type spreaders. The delivery roller further conserves material by spreading it evenly in a diamond pattern rather than a solid layer. Making efficient use of the spread material will allow you to go farther, prolonging the need to return for a refill saving farther, prolonging the need to return for a refill saving material, labour and fuel costs.

A switch allows the operator to select run or auto run. In auto run mode the sander automatically stops spreading whenever the tractor stops or is shifted into reverse. Without this feature an operator can go through material three times as fast. Run mode allows the sander to run constantly.

Agitators: 1Safety: Galvanized safety screenScrew jacks for removal: 3

Spread width: 41" (1041mm)Capacity: ½ cubic yardSpread distance: 3 to 8 miles (4 to 12km)

General Info

TRACKLESS VEHICLESREAR-MOUNT SIDEWALK SPREADER

Side panel construction: Corrugated profile for additional strengthTailgate: Automatic open/close when body raised or loweredOff-season storage: Complete unit removable (replacement hoods)

Capacity: ¾ cubic yardLift angle: 42°Hydraulic cylinders: 2 - 14" x 2"

General Info

The Dump Body is an option for municipalities that wish to double the spread distance with the Rear Sidewalk Spreader before having to return for a refill. The operator spreads material until empty and then refills the rear spreader by hydraulically raising the dump body. The built-in tailgate opens and closes automatically as the dump body is raised and lowered. When the winter season is over, the dump body and its supporting frame can be unbolted and stored until the its supporting frame can be unbolted and stored until the following winter.

TRACKLESS VEHICLESDUMP BODY

Drive: HydraulicSpread pattern: DiamondBrakes: Electric

Spread width: 40" (1016mm)Capacity: 1 ¼ cubic yardSpread distance: 12 to 14mph (19 to 22km)

General Info

The Trackless MT tow behind spreader has a 1-¼ yard capacity with a spread distance of up to 22 kilometers (14 miles). It is hydraulically driven and has an electric actuator which controls the spread distance. Actuator control is located in the cab next to the joystick.

The tow behind spreader conserves material by dispersing it The tow behind spreader conserves material by dispersing it evenly in a diamond pattern rather than a solid layer. The delivery roller maintains a 41-inch spread width; this prevents material waste as well as turf damage from salt, both of which can be a problem with spinner spreaders.

TRACKLESS VEHICLESTOW BEHIND SPREADER

14' (4267mm) Spraying BoomA 14 foot wide boom is available which mounts on the rear of the water tank frame. When spraying a lawn, marking your way is easily achieved by simply cutting the grass at the same time. As you cut the 14 foot wide swath, you spray the same 14 feet.

A dust control Spraying System is recommended for use with sweepers. It consists of a rear-mounted 80 U.S. gallon tank with 12 V pump, relief valve, and hoses. All MTs have electric wiring, hose and switch installed, ready for this system. A front spray bar kit must be ordered separately for each type of sweeper. A variety of different spray bars are also available for spraying salt brine, magnesium chloride, calcium chloride, etc.

TRACKLESS VEHICLESSPRAYING SYSTEMS

General InfoBroom diameter: 32" (812mm)Angling Mechanism: Self-centering scissor frame

Sweeping Width5' (1524mm) 8' (2438mm) 6' (1828mm) Made to order: 3' (914mm)7' (2133mm) Made to order: 4' (1219mm)

The Power Angle Sweeper can be used to perform a wide variety of tasks every month of the year making it one of the most cost-effective and versatile attachments to own. In addition to sweeping sand, gravel or other debris from sidewalks, parking lots, cul de sacs, intersections or other confined areas, the sweeper can also be used to dethatch large lawns and playing fields in the summer or remove snow from sidewalks in the winter.from sidewalks in the winter.

TRACKLESS VEHICLESPOWER ANGLE SWEEPERS

The winter battle can leave a considerable accumulation of sand and other debris on sidewalks. The Trackless Pickup Sweeper is the ideal attachment for your sidewalk spring clean up.

The sweeper is driven for one or more blocks collecting any The sweeper is driven for one or more blocks collecting any debris in its path and then emptied by a hydraulically controlled bottom gate. Rubber skirting on the sides and front eliminate much of the dust. However, best results are obtained by adding the optional spray bar kit and rear-mounted Water Tank.

Dump: Bottom gate, hydraulic controlledDrive: PTO to gearbox, shaft to right side, 60 chain to broom sprocket

Sweeping width: 4' (1219mm)Broom diameter: 32" (812mm)Casters: 3 swivel casters, hard urethane tires

General Info

TRACKLESS VEHICLESPICKUP SWEEPER

A parking lot is often the first place that pedestrians or visitors see when they arrive on a property, and they will greatly appreciate if it's freshly painted and well marked. Clear, neat parking lot lines and surface markings will instantly boost a property's appearance and ensure the safety of pedestrians and drivers.

The Trackless Paint & Stencil Painter attachment can be used The Trackless Paint & Stencil Painter attachment can be used for both straight line painting and stencil painting. For straight line painting, simply remove the cart, set up the spray gun

and lay down a fresh line of paint. For stencil painting, retrieve a stencil from one of two stencil drawers and use the hand wand sprayer and a hose reel to paint the arrow, handicap symbol or any other symbol as required.

With attachments available for asphalt and concrete repair, sweeping, plowing and painting, a public works department equipped with a Trackless MT is more than capable of performing parking lot maintenance tasks which are often outsourced to property maintenance companies.

TRACKLESS VEHICLESLINE & STENCIL PAINTER

The Trackless Boom Flail Mower is perfect for those difficult, unsafe or impossible areas to mow. Ditches, steep inclines, over guard rails and waters-edge are areas in which the boom flail excels. Hydrostatic speed control allows the operator to react to oncoming obstacles for optimum safety and productivity.

Can be removed from the Trackless MT in approximately 10 Can be removed from the Trackless MT in approximately 10 minutes. Within minutes another attachment can be installed, and the operator can be on the way to another job site.

Below grade cut: 53" Vertical reach: 13½'Cutting blades: 33

Width of cut: 43½"; overall width of head 53½"Horizontal reach: 13½' from center of MT to outside cutOverall level ground cutting coverage: 11', starting 5" inside outer tire

General Info

TRACKLESS VEHICLESBOOM FLAIL MOWER

The Trackless front-mount Flail Mower was designed to cut heavier grass, weeds, scrub and light brush where a conventional rotary lawn mower could not cope. An enclosed mower housing and rubber safety skirts keep the cut grass, mulch, and other debris within the cutting chamber and enable safe mowing near roads, parks, and other busy or populated areas.

Large gauge wheels and a full-width gauge roller give the Large gauge wheels and a full-width gauge roller give the mower front-to-rear flexibility allowing it to follow ground contours producing an even cut without turf damage.

Gauge roller: 6" diameter steel, full width Rotor tube: 4" diameter with 1-7/16" shaftBlades: 33 - 2¾" wide (can be resharpened)

Width of cut: 74" (1879mm)Cutting height: 1" to 4" (25mm to 102mm)Gauge wheels: 2 -16" x 4" semi-pneumatic

General Info

TRACKLESS VEHICLES74-INCH FRONT FLAIL MOWER

6' (2006mm) Rotary MowerThe Trackless front mounted 72-inch Rotary Mower is designed for close trimming on both sides with a full-width rear mount discharge. Four large gauge wheels and flexible attaching frame allow accurate cutting on rolling ground. Hydrostatic speed control and articulated steering on the MT provides the operator with precise control for trimming.

10' (3251mm) & 14' (4470mm) Rotary MowerThe Trackless wing type mower was designed to drastically cut mowing time on large areas such as The Trackless wing type mower was designed to drastically cut mowing time on large areas such as campuses and parks. The three-section, front mounted mower provides the flexibility required to avoid scalping on undulating ground. It uses a 3-blade PTO driven center section with a hinged hydraulic driven wing on each side.

Drive: PTO to right angle gear box, 2 V-beltsCutting heights: 1½" to 4" in ½" incrementsCutting tip speed: 18,500 fpm @ 2,200 engine rpm

Spindles: 3 x Timken bearings, greaseableBlades: 3 x 25" x 2½" x ¼" high liftCasters: 4 swivel with 4" x 10" pneumatic

General Info

TRACKLESS VEHICLESROTARY FINISHING MOWERS

Safety: Automatic shutoff valves when wings liftedCutting heights: 1½" to 5" in 3/8" incrementsCutting tip speed: 17,500 fpm @ 2,200 engine rpm

Anti-scalp rollers: 2 in centre deckWheels: Solid urethane, puncture proofDeck construction: 3/16" steel plate

General Info

For rougher areas and as an option for those who desire an extra heavy duty mower, we have partnered with Progressive Turf Equipment to offer you another mower option. Further information is available from our sales department.

TRACKLESS VEHICLESPROGRESSIVE TURF 14' MOWER

If you want to build a healthy green space, the soil beneath the grass will benefit from some much-needed attention as well. Soil aeration is one of the easiest yet most beneficial maintenance tasks you can do to a lawn. Improving soil drainage and encouraging worms and microbes will help control lawn thatch and reduce soil compaction promoting root growth and a healthier, thicker top side.

The Trackless Aerator is mounted to the front of the Trackless The Trackless Aerator is mounted to the front of the Trackless MT allowing the operator to keep the implement in their sights providing an easier and safer alternative to tow behind models.

Tines: 120 - ¾" closed type Aeration pattern: 5.5" x 6.5"Weight: 950lbs (430kg)

Aerating width: 72" (1828mm)Aerating depth: 3" (76mm)Pivoting tine wheels: 12

General Info

TRACKLESS VEHICLESAERATOR

The Trackless 24-inch Stump Grinder is the latest addition to their impressive line-up of attachments for their North American built municipal tractor. The 24-inch diameter rotor has 34 bolt-on carbide teeth and is powered from the tractors hydraulic system. With the Trackless joystick, movements are very precise and easy for the operator when lowering, tilting, or maneuvering the cutting head. Customers like that the grinder is front mounted, easy to maneuver in tight areas and can be is front mounted, easy to maneuver in tight areas and can be driven from one job site to another without having to load it on a truck and trailer to transport it several times per day.

Cutting RangeSwing arc 80°

15" above ground14" below ground level

Cutting HeadHydraulically driven24" diameter

34 carbide bolt on teeth

General Info850 rpm cutting speedMT Series Tractors onlyWeight of 975lbs (443kg)

TRACKLESS VEHICLESSTUMP GRINDER

Concrete DrumAsphalt Drum Your Choice, Asphalt or ConcreteThe Asphalt Cold Planer is ideal for repairs to asphalt abutting manhole covers, curb sides, gutters and driveways. It can also be used for pothole repair or any other utility cut. The Concrete Cold Planer has approximately three times more picks and

operates at a higher speed.

Sidewalk maintenance doesn't stop when the snow melts. The winter freeze-thaw cycles can cause frost heave and play havoc on pedestrian walkways creating dangerous trip hazards and liability exposure for the city. Removing these hazards is often outsourced to companies that specialize in slab jacking (aka mudjacking), grinding or milling. However, a public works department equipped with a Trackless MT has the ability to repair asphalt and concrete surface damages in a cleaner, faster and more cost-effective manner saving the city from faster and more cost-effective manner saving the city from unnecessary costs.

TRACKLESS VEHICLESCOLD PLANER

Quick, Cost-effective, Permanent Asphalt RepairIn a time of reduced budgets, increased traffic flow and growing concerns over environmental impact, the costs associated with traditional asphalt patching methods continue to climb making new, cost-effective types of repair a necessity. Asphalt heating, whereby the defective surface is reheated, raked out and re-compacted, is quickly becoming the new standard due to its great success at a low cost while producing little or no waste.

The Trackless Infrared Asphalt Heater was designed to replace traditional propane-fueled asphalt The Trackless Infrared Asphalt Heater was designed to replace traditional propane-fueled asphalt heaters with a PTO driven portable generator powering electrical heating elements. Our design provides a safe, even controlled heat which will soften the existing asphalt without burning and produce a rake ready surface in 15 minutes.

No Open FlameThere is no open flame. Electric elements produce an even and controlled heat which will not burn There is no open flame. Electric elements produce an even and controlled heat which will not burn the surface. No open flame over or near catch basins or manholes where methane gas or other flammable gases or liquids could be present is a safer scenario for this type of repair.

TRACKLESS VEHICLESINFRARED ASPHALT HEATER

The generator may be purchased separately.

The Trackless Front End Loader Attachment is ideal for the lighter work required by Grounds Maintenance Departments. Before purchasing a skid steer loader or a small tractor/loader, consider the benefits and cost-savings of being able to mount our loader in approximately five minutes and when the work is completed, switch back to one of the Trackless mowers or other attachments.

Bucket Size49" (1245mm) & 77" (1955mm)

Lifting Capacity1,200lbs (544kg)

Lifting Height72" (1828mm)

TRACKLESS VEHICLESFRONT END LOADER

A municipal leaf collection program is a great service to offer residents but it can also be an expensive venture. The Trackless Leaf Loader is an advanced and efficient leaf loading attachment whereby leaves are picked up curbside, mulched and blown into a truck ready to be taken offsite.

Heavier Loads & Fewer TripsLoose leaves are reduced in volume by way of our mulching process. This means that far more Loose leaves are reduced in volume by way of our mulching process. This means that far more material can fit into the truck resulting in fewer trips to the collection centre. Even though leaves represent up to 20% of municipal solid wastes, states such as Jersey and many communities have banned leaf disposal through landfills or incineration. As others follow, mulching and/or composting will soon become mandatory as the first step in leaf disposal or recycling.

Reduce Labour, Increase ComfortThe enclosed heated cab of the Trackless MT provides the operator a safe and comfortable The enclosed heated cab of the Trackless MT provides the operator a safe and comfortable working environment out of any inclement weather conditions. Rain, snow or cold weather won't affect your operator or the Leaf Loader's ability to pick up leaves even if they are stuck or frozen to the pavement.

TRACKLESS VEHICLESLEAF LOADER

TRACKLESS VEHICLES LTD,55 THUNDERBIRD DRIVE

P.O. BOX 244, COURTLAND ONTARIOCANADA N0J 1E0

PHONE (519) 688-0370FAX (519) 688-3644

SOLD AND SERVICED BY

TRACKLESSVEHICLES.COM