series - submittal.info · fs3 fs4 fs5 3” top 4” top 5” top banner arms ba fb3 fb4 fb5 3”...
TRANSCRIPT
N T R O D U C I N G
®
® series
series
INDUSTRIES, INC.was founded over 30 years ago to exclusively design and manufacture lighting standards. KW continues this business philosophy with theintroduction of its Designer Series of decorative bases and lighting poles.
Superior Finishes – KW Industries,an innovator in powder coatings and applications, will offer its exclusiveK-KLAD® Coating System as an optional finish with Designer Series.
Superior Shafts and Bases – Low copper, pure aluminum alloys provide lightweight, high-strength, corrosion-resistant bases and shafts. Steel shafts coupled with wraparound aluminumand cast iron clamshell bases provide stength, height and durability.
Superior Service – The unmatchedcustomer service of KW stands behindDesigner Series products.
FINISHES
MOUNTINGDESIGNATIONS
KW offers a standard polyester thermosetting finish andour unique K-KLAD® powder coating as an optional finish.
HOW TOORDER
When ordering, be sure to specify the complete catalog number. Ourcatalog numbers reflect the precise specifications of the item ordered.
Aluminum shaftsare available inseveral extrudedshapes and heightsfor visual appeal.Steel standards fromKW’s current productcatalog are availableup to 39’ in heightand from 3” to 14”in diameter.
Bases come inaluminum andcast iron. For steelshaft applications,clamshell basesare available.
STANDARDBRZBLKGRY
BRONZEBLACKGRAY
GRNWHTP
GREENWHITEPRIMED
K813K821K845
BRONZEBLACKNATURAL ALUMINUM
K891K881
GREENWHITE
®
Catalog Logic(Ordering Example)
RAF 14 – 4.0 – 11 – BLK – 3 – WPR2 – WA17
SHAFTSTYLE
SHAFTDIAMETER
NOMINALHEIGHT
MOUNTINGDESIGNATION
OPTIONS
GAUGEBASESTYLE
FINISH
SM10SM2090SM2180
FOR 1 LUMINAIREFOR 2 LUMINAIRES @ 90°FOR 2 LUMINAIRES @ 180°
SM3090SM3120SM4090
FOR 3 LUMINAIRES @ 90°FOR 3 LUMINAIRES @ 120°FOR 4 LUMINAIRES @ 90°
34
FA3FA4FA5
2-7/8” x 2-7/8” TENON2-7/8” x 4” TENON
SIDE MOUNT*TENON MOUNT
OPTIONS
ARMSTYLES
BASESTYLES
SHAFTSTYLES
3” TOP4” TOP5” TOP
WashingtonWA13
13” Round3”, 4”
8’, 10’, 12’, 14’
WashingtonWA17
17” Round4”, 5”
10’, 12’, 14’, 16’
GeorgetownGA15
15” Round3”, 4”
8’, 10’, 12’, 14’
PhiladelphiaPA10
10” X 10” Octagonal4”, 5”
8’, 10’, 12’, 14’, 16’
ManhattanMA17
17” Round4”, 5”
8’, 10’, 12’, 14’, 16’
BASE O.D.SHAFT DIAMETERNOMINAL HEIGHT
FINIALSAcorn
CapitolSingle
Spike Ball
CPS
FS3FS4FS5
3” TOP4” TOP5” TOP
BANNER ARMS
BA
FB3FB4FB5
3” TOP4” TOP5” TOP
FLHPLHCPLNPLWPR2
NOTE:For all attached options,an approved orientationdrawing is required.
* Requires an approved orientation drawing. Certain combinations may not be available on certain poles.
FLAG HOLDERPLANT HOLDERTHREADED COUPLINGTHREADED NIPPLEWEATHERPROOFDUPLEX RECEPTACLE
CapitolDouble
CPD
AustinCurved
AUC
AustinScroll
AUS
Fluted Non-TaperedAluminum (RAF)3”, 4”, 5” Dia.
Round Non-TaperedAluminum (RAS)3”, 4”, 5” Dia.
Round Non-TaperedSteel (RSP)3”, 4”, 5”, 6” Dia.
Fluted TaperedSteel (RSF)
Round TaperedSteel (RTSP)
KW INDUSTRIES, INC. 909 INDUSTRIAL BOULEVARD, SUGAR LAND, TEXAS 77478 (281) 240-0909 TOLL-FREE (800) 275-5944 WEB SITE www.kwindustries.com E-MAIL [email protected]
®
GE
OR
GE
TO
WN
PH
IL
AD
EL
PH
IA
MA
NH
AT
TA
N
WA
SH
IN
GT
ON
T H E K W I N D U S T R I E S D E S I G N E R S E R I E S T E A M W E L C O M E S A L L S P E C I A L R E Q U E S T S F O R C U S T O M D E S I G N T R E A T M E N T S .