series bumperettes 6 contents · 2015-12-01 · br 1456 series 2a/3 bearmach a sturdy built step...
TRANSCRIPT
5
Exterior Styling Bumperettes 6 Mirrors 7 Wheel Carrier 8 Front Grille 8 Sliding Window Kit 8 Sun Visor 8 Wheel Arch 8 Winch Mounts 9 Side/Rear Step 9 Mudflaps 9Interior Styling Steering Wheel/Boss 10 Interior Mirror 10 Door Repair Channel 10 Seat Belts 11Exmoor Trim 12-17Protection Diff Guard/Pan 18 Wading/Waterproofing Kit 18 Chequer Plate 19 Roll Cage 19 Window Mesh 19Lighting Lights 20 Light Guards/Bezels 21Travel and Touring Roof Racks/Bars 22-23 Dog Guards 23Wheels and Accessories 25Towing 26
Series
Contents
6
Exterior StylingSeries
Bumperettes HD Rear Black (Powder Coated)
Part Number Application Brand
BA 290 Series 3 Bearmach
These are very practical and give your vehicle a very individual look. Now with extra chequer-plate tread.
Bumperettes HD Rear (Galvanised)
Part Number Application Brand
BA 290G Series 3 Bearmach
As BA 290 above with galvanised finish.
Bumperettes Rear Black
Part Number Application Brand
BA 090 Series 2/2a/3 Bearmach
Steel folded section construction with sturdy brackets. Black nylon coated. Bolts directly in place of the existing grab handles and affords good protection.
Bumperettes Rear Black
Part Number Application Brand
BA 090T Series 2/2a/3 Bearmach
Heavy duty 1” tube construction complete with brackets. Bolts directly in place of the existing grab handles and affords good protection.Must use jack extension piece when using high lift jack. Will not fit with spare wheel carrier BA 132.
Bumperettes Rear Galvanised
Part Number Application Brand
BA 090G Series 2/2a/3 Bearmach
As BA 090T but with galvanised finish.
Bumperettes Rear Stainless Steel
Part Number Application Brand
BA 090S Series 2/2a/3 Bearmach
As BA 090T but with stainless steel finish.
Bumperettes Rear Black
Part Number Application Brand
RRC2971 Series 2/3 Left Bearmach
RRC2970 Series 2/3 Right Bearmach
Some drilling of crossmember may be required.Will fit with BA 132 spare wheel carrier.
7
SeriesExterior Styling
Mirror Head Plain 10 x 7
Part Number Application Brand
BA 072 Series 3 Bearmach
Mirror Head Plain 7 x 5
Part Number Application Brand
BA 071 Series 3 Bearmach
Mirror Assembly (‘E’ Marked)
Part Number Application Brand
BR 1918R Series 3 Bearmach
Will fit vehicles with drilled hinges.(Defender style)
Mirror Unbreakable
Part Number Application Brand
BR 1914U Series 3 Spafax
These mirrors are awesome! We drove a Defender 90 over the mirror and it did not break, even the casing remained intact.Ideal for off road driving.
Mirror Unbreakable Heated
Part Number Application Brand
BR 1914UH Series 3 Spafax
Mirror with Arm
Part Number Application Brand
BR 0997 Series 3 OEM
Mirror Arm
Part Number Application Brand
BR 1086 Series 3 OEM
Hinge fit.
Mirror Head
Part Number Application Brand
BR 1092 Series 3 OEM
Mirror Arm
Part Number Application Brand
BR 1291 Series 3 OEM
Wing Fit.
Mirror Head Round
Part Number Application Brand
BR 1432 Series 3 Bearmach
8
Exterior StylingSeries
Sliding Window Kit Hard Top (Pair)
Part Number Application Brand
BA 181 41.5” x 16.75” Bearmach
BA 182A 36” x 15” Bearmach
Patent part, some modification may be required.
Sun Visor Exterior Kit
Part Number Application Brand
BA 131 Series 2/2a/3 Bearmach
Aluminium folded visor with steel plated brackets. Supplied as a complete kit ready for installation, all fixtures and fittings plated. Visor supplied in bright finish.Suitable for spraying to match colour of vehicle.
Front Grille
Part Number Application Brand
BR 0546 Series 3 Bearmach
Spare Wheel Carrier Soft Top Swingaway
Part Number Application Brand
BA 132B Series 3 Bearmach
Suitable for drop down/side opening tailgates.
Spare Wheel Carrier Swingaway
Part Number Application Brand
BA 132 Series 3 Bearmach
Sturdily mounted to the chassis to ensure minimum strain on rear door and hinges. Opens with rear door and can be used with our bumperettes.
Wheel Arch Set Plastic
Part Number Application Brand
BA 019 Series 3 Bearmach
ABS plastic wheel arch set.Will not fit station wagon type vehicles, suitable for short wheel base only.
9
Exterior Styling Series
Winch Plate Chassis Mounted
Part Number Application Brand
BA 2028A Series 3 Bearmach
To suit T-Max winches 11,000lbs and greater.
Requires drilling for fitment to Series vehicles.
Winch Plate Chassis Mounted
Part Number Application Brand
BA 2028 Series 3 Bearmach
To suit 6,000lb, 8,000lb, or 9,500lb T-Max and Warn winches.Requires drilling for fitment to Series vehicles.
Rear Step
Part Number Application Brand
BA 172 Series 3 Bearmach
Made from heavy gauge steel and bar, then plated to give an extra durable finish.No drilling required, bolts directly onto cross member and can be used in conjunction with all towing attachments.
Side Step Kit
Part Number Application Brand
BR 1456 Series 2a/3 Bearmach
A sturdy built step with convenient spring loaded action to help raise and lower the step.
Mudflaps Front (Pair)
Part Number Application Brand
BR 1015 Series 2a/3 Bearmach
Made from flexible, hi-density rubber.Fixings not included.
Mudflaps Rear (Pair)
Part Number Application Brand
BR 0204 Series 2a/3 Bearmach
Made from flexible, hi-density rubber.Fixings not included.
10
Interior StylingSeries
Steering Wheel 14” Vinyl
Part Number Application Brand
BA 150 Series Bearmach
Not for off road use.
Door Repair Channel
Part Number Application Brand
BA 2053 Series 3 Bearmach
This channel is the part of the frame that is prone to rust. Weld this channel in place and you have a secure door skin as good as new.Instead of replacing the whole frame.
Steering Wheel 15” Leather
Part Number Application Brand
BA 151 Series Mountney
Not for off road use.
Boss for BA 150/1
Part Number Application Brand
BA 152 Series 1 Springalex
BA 153 Series 2a/3 Springalex
Interior Mirror
Part Number Application Brand
BR 0970 Series 3 Bearmach
11
SeriesInterior Styling
Seat Belt 3 Point Inertia Angled
Part Number Application Brand
BA 188B Series Securon
Seat Belt 3 Point Inertia Short
Part Number Application Brand
BA 188A Series Securon
Seat Belt 3 Point Inertia Std
Part Number Application Brand
BA 188 Series Securon
Seat Belt 3 Point Inertia Std
Part Number Application Brand
BA 188C Series Exmoor
Seat Belt Lap Centre
Part Number Application Brand
BA 187 Series Securon
BA 187B Series Exmoor
Seat Belt Static 3 Point
Part Number Application Brand
BA 184 Series Securon
12
Exmoor TrimSeries
Cubby Box Lockable
Part Number Application Colour Brand
BA 2420 Series Black Exmoor
BA 2421 Series Grey Exmoor
Incredibly secure heavy-duty locking bolt that neatly self-locks when the lid closes shut. Stylish and tough powder coated finish exterior, padded lid trimmed to match your interior. Twin removable cup holders and a neat rear map pocket and handy additional front pocket tray.
Cubby Box Black Vinyl
Part Number Application Brand
BA 189A Black Series Exmoor
BA 189AG Grey Series Exmoor
Padded lid with brass hinges and locking stay.g ytough
Cup Holder for BA 189A
Part Number Brand
BA 189D Exmoor
Replacement cup holder.
Hardura Tunnel kit
Part Number Hardura Felt Application Brand
BA 2485 Black Hardura Hardura Tunnel 8 piece R/H Drive Exmoor
BA 2486 Black Hardura Hardura Tunnel 8 piece L/H Drive Exmoor
Exmoor Trim have reproduced the original interior finish for the Series 2 & 3 cab interiors. The Hardura was widely used as the standard interior finish for these early Land Rovers. The Hardura is a Plastic coated felt with bound edges. The material is very hard wearing and offers a wipe clean surface.
Door Trim Set
Part Number Application Brand
BA 049 Black Front door pair 6 piece kit Exmoor
BA 049B Black Front door pair with pockets 6 piece Exmoor
BA 049C Elephant Hide Grey Front door pair 6 piece kit Exmoor
BA 049D Elephant Hide Grey Front door pair with pockets 6 piece Exmoor
BA 044 Black Station wagon rear door panel Exmoor
BA 044A Elephant Hide Grey Station wagon rear door Panel Exmoor
Front and rear Series door trim sets available in Black vinyl or Elephant Hide Grey for the earlier Series 2, 2a (safari rear side door panels are also available on request).
Moulded Mat System (Front Only)
Part Number Colour Application Brand
BA 2481 Grey Series 2/3 (4 Cylinder engines) Exmoor
BA 2488 Black Series 2/3 (4 Cylinder engines) Exmoor
These durable mat systems improve sound deadening and heat transfer from the gearbox and exhaust system. Providing excellent protection from dirt they are easily cleaned. Made from polyethylene, giving a very hard wearing product. Includes section for seat box.
13
SeriesExmoor Trim
Hinged Rear Bench Seat (Side Facing)
Part Number Application Brand
BR 1696 Black Vinyl Bench complete - black coated frame Bearmach
320674 Black Vinyl 2 Man cushion only Exmoor
BA 2427 Black Vinyl 2 Man back rest only Exmoor
BR 1696G Grey Vinyl Bench complete - black coated frame Exmoor
MWC5463LCS Grey Vinyl 2 Man cushion only Exmoor
BA 2427A Grey Vinyl 2 Man back rest only Exmoor
BA 2429 Elephant Hide Grey Bench complete - galvanised frame Exmoor
BA 2428 Elephant Hide Grey 2 Man cushion only Exmoor
BA 2427B Elephant Hide Grey 2 Man back rest only Exmoor
Rear bench seats are manufactured to blend with your Land Rover interior by using the same frame as were originally used. This enables you to install our metal backed bench backs and cushion pads with your original frames if you have them, or you can simply install the complete seat. The seat is supplied with all fixings and mounting hardware as well as retaining straps for when the seat is stowed away. We recommend only lap type belts with this seat.
Rear Fold-up (Side Facing)
Part Number Application Brand
BA 2093 Black Vinyl Series 2,2a & 3 (not lightweight) Exmoor
BA 2093G Grey Vinyl Series 2,2a & 3 (not lightweight) Exmoor
BA 2093A Elephant Hide Grey Series 2,2a & 3 (not lightweight) Exmoor
Inward Facing Tip Up Seat. Black powder-coated and supplied as a pre-assembled kit with all the hardware you require for installation. You are able to fit two seats in the rear facing inwards on each wheel arch, this also allows you to tip up the base towards the back rest and neatly stow away when not in use.
Black Vinyl Grey Vinyl
14
Exmoor TrimSeries
Standard Seats
Part Number Application Brand
BR 1073 Black Vinyl Standard Front Outer Back (Bolt Type) Exmoor
BR 1091 Black Vinyl Standard Front Outer Base Exmoor
BR 1075 Black Vinyl Standard Front Centre Back Exmoor
BR 1090 Black Vinyl Standard Front Centre Base Exmoor
BA 2077B Black Vinyl Standard Front Full Seat Set Exmoor
BR 1073A Elephant Hide Grey Standard Front Outer Back (Bolt Type) Exmoor
BR 1091A Elephant Hide Grey Standard Front Outer Base Exmoor
BR 1075A Elephant Hide Grey Standard Front Centre Back Exmoor
BR 1090A Elephant Hide Grey Standard Front Centre Base Exmoor
BA 2077C Elephant Hide Grey Standard Front Full Seat Set Exmoor
Standard Series 2, 2a, seating is available in Black Vinyl & Elephant Hide Grey.
Exmoor Trim now produce a range of Series 2 and 2a seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor. Metal-backed squabs were only ever used.
Deluxe Seats
Part Number Application Brand
BR 1699 Black Vinyl Deluxe Front Outer Back Exmoor
BR 1698 Black Vinyl Deluxe Front Outer Base Exmoor
BR 1689 Black Vinyl Deluxe Front Centre Seat Back Exmoor
BR 1690 Black Vinyl Deluxe Front Centre Seat Base Exmoor
BA 2077A Black Vinyl Deluxe Front Full Seat Set Exmoor
Deluxe Series 3 seating in Black Vinyl, please note that these seats are also available as backs or bases on their own.This style of seat was used throughout the production run of the Series 3 Land Rover with its distinctive, sculptured seats and face fluting running from front to back in the centre panels of the seat.
15
SeriesExmoor Trim
Hi-Back Extreme MK2 Seat
Part Number Trim Brand
BA 2441M Moorland Exmoor
BA 2441T Techno Exmoor
BA 2441LT Logo Tan Exmoor
BA 2077 Black Vinyl Exmoor
BA 2441BL Black Leather Exmoor
BA 2441LB Logo Black Exmoor
BA 2441DG Dark Grey Vinyl Exmoor
BA 2078 Caviar Exmoor
Offering an easy upgrade for the earlier Series and MOD early Defenders.
Soft Top Front Seat Belt Bar
Part Number Application Brand
BA 2416 Series Exmoor
Designed to easily install into any Series 2, 2a, 3 & Defender models alike.
The seat belt bar is designed to allow for easy fitting of 3 or 4 point inertia seat belts that no longer have a high mounting point available.
These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.
With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs.
The Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support. The moderately raised sides to the cushion shape give that much needed extra hold and support from the old leaf spring ride.
d
The seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.
Available in a wide range of materials or “Bespoke” as shown here in some of the pictures, with colour coded piping on request.
16
Exmoor TrimSeries
Series 2 & 3 Floor Matting
Part Number Application Brand
BA 3500 Front Pair Bearmach
Easily removed for cleaning with a chequer plate finish with oval logo. Will fit either left or right hand drive. Raised edge border to keep in mud and grime
Series 2 & 3 Floor Matting
Part Number Application Brand
BA 3510 Middle Row Bearmach
For the second row passengers in a 109” county station wagon. Will fit a 6 cylinder type Series 2 & 3. Will fit either left or right hand drive.
Series 2 & 3 Floor Matting
Part Number Application Brand
BA 3524 Load Area Bearmach
Rear Heavy Duty Floor Mat 36” x 47 3/4 “ long and will fit the rear floor well only.
Carpet sets
Part Number Application Brand
BA 4318 Series 2/3 Full Standard Front Carpet Set Exmoor
BA 4319 Series 2/3 Front Premium Carpet Set Exmoor
BA 4320 Series 2/3 88” Rear Premium Carpet Set Exmoor
BA 4330 Series 2/3 88” Premium Full Vehicle Carpet Set Exmoor
Quality Carpet Sets as you would expect from Exmoor Trim. These carpet sets have been designed to be model specific and we have carefully chosen a carpet that is best suited to Land Rover life! laminated with an acoustic backing approximately 8mm thick overall, giving these parts sound and heat insulation.
Series 2 & 3 Floor Matting
Part Number Application Brand
BA 2491 Series Hardura Insulation Front Matting Kit
Exmoor
Covers the entire front cab floor and seat box with a wipe clean, hardwearing FELT backed acoustic hardura.The seat box mounting and access panels are pre cut for ease of installation.
Front Standard
Front Premium
Full Carpet Set
Rear Premium Rear Premium
The Series Full Carpet set vehicle package is available for all short wheel base Series. The set carpets the entire vehicle front to back with precision cut panels covering all the wheel arches and seat box alike with all mounting points and storage clear. (left and right hand drive options).
17
SeriesExmoor Trim
Series Canvas Hoods 88” Full Length
Part Number Application Brand
BR 0210 Khaki 88” Full Length Hood Rear Window Exmoor
BR 0207 Khaki 88” Full Length Hood Rear & Side Window Exmoor
331110AE Sand 88” Full Length Hood Rear Window Exmoor
331113AE Sand 88” Full Length Hood Rear & Side Window Exmoor
BR 0245B Black 88” Full Length Hood Rear Window Exmoor
BR 0245C Black 88” Full Length Hood Rear & Side Window Exmoor
Deep weave canvas hood, hand made to the highest standard.Tighter weave giving superior waterproofing and durability characteristics.• Accurate colour matching to the original archived canvas samples.• Vat dyed ensuring the colour has penetrated all the way through the
cotton canvas.• Improved colour fastness rating ensuring that the natural UV fading
is prolonged especially in hot climates.• Cold water shrinkage of the natural cotton fibre is greatly reduced.
Series Canvas Hoods 88” 3/4 Length
Part Number Application Brand
BR 0212 Khaki 88” 3/4 Length Hood Rear Window Exmoor
BR 0212A Sand 88” 3/4 Length Hood Rear Window Exmoor
BR 0208 Khaki 88” 3/4 With Side Windows Exmoor
Bikini Hood Series
Part Number Application Brand
BA 202 Sand Bikini Hood Series 2, 2a & 3 Exmoor
BA 202A Khaki Bikini Hood Series 2, 2a & 3 Exmoor
BA 202B Black Bikini Hood Series 2, 2a & 3 Exmoor
Simple to fit and a great product for the summer, attaches to your existing stick set and will fit either short or long wheel base series Land Rovers.
Series Canvas Hoods 109” 3/4 Length
Part Number Application Brand
331307 Khaki 109” 3/4 Length Hood Rear Window Exmoor
BR 0245A Sand 109” 3/4 Length Hood Rear Window Exmoor
331308AE Sand 109” 3/4 Length Hood Exmoor
BR 0245 Khaki 109” 3/4 Length Hood with Side Windows Exmoor
BR 0245B Black 109” 3/4 Length Hood Rear Windows Exmoor
BR 0245C Black 109” 3/4 Length Hood with Side Windows Exmoor
Series Canvas Hoods 109" Full Length
Part Number Application Brand
BR 0222 Khaki 109” Full Length Hood Rear Window Exmoor
BR 0224 Khaki 109” Full Length Hood Rear & Side Window Exmoor
331259AE Sand 109” Full Length Hood Rear Window Exmoor
331260AE Sand 109” Full Length Hood Rear & Side Window Exmoor
Series Hood Stick Sets
Part Number Application Brand
330999 Galvanised 88” Full Length Exmoor
332950 Galvanised 88” 3/4 Length Cab Fit Exmoor
332951 Galvanised 109” Full Length Exmoor
332952 Galvanised 109” 3/4 Length Cab Fit Exmoor
Exmoor Trim supply a high quality range of hood stick sets to fit all variations of Land Rover Hoods. When we supply, we send you the complete package with all body fittings including rope hooks, stick clamps to rivets, nuts & bolts, not forgetting instructions!
18
ProtectionSeries
Diff Guard
Part Number Application Colour Brand
BA 121 Rover type Zinc Plated Bearmach
Easy to fit, applicable to all models with standard axles. Zinc plated for corrosion resistance.No drilling required.
Diff Pan
Part Number Brand
BA 121D Front Bearmach
BA 121C Rear Bearmach
Replacement diff pan to suit Rover type axles. Replaces rusted out or perforated units.Requires welding into place.
Diff Guard
Part Number Application Brand
BA 3129 Salisbury type Bearmach
Wading Kit
Part Number Application Brand
BA 2169 Series 2/2a/3 Bearmach
Consists of breather pipes for axles.
Waterproofing Kit
Part Number Application Brand
BA 2840 Series (V8) Bearmach
Everything you need to protect the distributor from damp conditions.Includes boots for coil and distributor.
19
SeriesProtection
Protector Sill Guard Aluminium (Pair)
Part Number Application Brand
BA 126A Series 88” Bearmach
BA 127A Series 109” Bearmach
Made from 2mm aluminium chequer plate. They protect the sills from scuffing while entering or leaving the vehicle as well as stone chips and light off road damage.Ideal finishing touch
Standard Bumper End Cover (Pair)
Part Number Application Brand
BA 4022 Aluminium Series 2/2a/3 Bearmach
BA 4022B Black Series 2/2a/3 Bearmach
Aluminium chequer plate gives a non slip surface to the end of your bumper.
Protector Wing Front (Long) 2mm (Pair)
Part Number Application Brand
BA 113A Series 3 (no vent holes) Aluminium Bearmach
BA 113C Series 3 (no vent holes) Black Bearmach
Rear Window Mesh Guard Kit (Set of 3)
Part Number Application Brand
BA 2170 Series Bearmach
For added security this set of window guards is constructed from a sturdy metal grid, black nylon coated.Covers rear door window and the two rear quarter panels.
Roll Cage Standard (Not Competition)
Part Number Application Brand
BA 2005 Series 2/2a/3 Bearmach
Standard roll bar, manufactured in 2” (50mm) diameter tubular steel with 3.2mm wall thickness. MIG welded with heavy mounting plates.Body mounted (bolted onto cappings)Not A.R.C.Will not fit with hard top.Supplied unpainted.
Protector Wing Rear (Pair)
Part Number Application Brand
BA 124A Series 2a/3 88” Aluminium Bearmach
20
LightingSeries
LED Halo Light Set Crystal (Non E Marked)
Part Number Application Brand
BA 070HC Series RHD Bearmach
LED Halo Set Ion Lens H4 (Non E Marked)
Part Number Application Brand
BA 070HI Series RHD Bearmach
Halo Ions Gold effect.
Crystal Light Conversion Kit H4 Unit (Non E Marked)
Part Number Application Brand
BA 070C Series RHD Bearmach
Halogen Conversion Kit H4 (E Marked)
Part Number Application Brand
BA 070A Series LHD Bearmach
BA 070 Series RHD Ring
7” Crystal Clear Set H4 (E Marked)
Part Number Application Brand
BA 070CA Series LHD Ring
BA 070CB Series RHD Ring
7” Xenon Headlamp Conversion Kit (E Marked)
Part Number Application Brand
BA 070XC Series RHD Ring
Plastic Headlamp Bowl Kit (Single)
Part Number Application Brand
BA 051 Series 2a/3 Bearmach
Non rust plastic headlamp kit with retainer
Headlamp Bezel (Chrome)
Part Number Application Brand
BE 2038 Series 3 OEM
7” Xenon Ultima High and Low Beam (Includes side light)
Part Number Contents Housing
Material
Lens Material Application
BA 070XR 2 x Xenon Ultima H42 x Ice blue side light W5W2 x 7” Halogen Headlamp
Aluminium Glass Series
BA 070XL 2 x Xenon Ultima H42 x Ice blue side light W5W2 x 7” Halogen Headlamp
Aluminium Glass Series
BA 070CBBA 070CA
21
SeriesLighting
Headlamp Bezel
Part Number Application Brand
BR 1878R Series 3 Bearmach
Headlamp Rim
Part Number Application Brand
BR 1794 Series 3 OEM
Headlamp Guard (Single)
Part Number Application Brand
BR 1634 Series 3 Bearmach
Manufactured in welded 1” (25mm) wire mesh with zinc plated finish.Fixed with self tapping screws.Will fit all models with headlights in wing.
Lamp Guards
Part Number Application Brand
BA 012 Headlamp (Pair) Series 3 Bearmach
BA 012B Rear (Set of 4) Series 3 (Late) Bearmach
BA 012C Rear (Pair) Series 3 (HCPU) Bearmach
Slatted on edge to square frame. Finished in black nylon.Fixed by special bracket that fits on to lamp bezel.Will fit all models with headlights in wing.
Lamp Guard Rear Galvanised (Single)
Part Number Application Brand
BR 1645 Series 3 Bearmach
Manufactured in welded 1” (25mm) wire mesh with zinc plated finish.Fixed with self tapping screws or bolts to bodywork.
22
Travel & TouringSeries
Roof Rack Gutter Clip SWB
Part Number Application Brand
BA 007A Series 88” Fully assembled Bearmach
BA 007 Series 88” Flat pack Bearmach
Manufactured from ¾” Box section steel. Jig welded and with a galvanised finish. Clamps onto gutter fixings.Flat pack is same construction but is supplied for self assembly.Fitting kit supplied.
Roof Rack Gutter Clip LWB
Part Number Application Brand
BA 008A Series 109” Fully assembled Bearmach
BA 008 Series 109” Flat pack Bearmach
Manufactured from ¾” Box section steel. Jig welded and with a galvanised finish. Clamps onto gutter fixings.Flat pack is same construction but is supplied for self assembly.Fitting kit supplied.
Roof Rack Access Ladder
Part Number Application Brand
BA 010 Series Bearmach
Optional ladder for above roof racks, similar construction as the roof racks and is easily fitted to the back of the vehicle and rear of the roof rack allowing easier access to lift loads to the roof rack.Fitted to left of the rear door.
Tyre Step for 4x4’s and Light Commercials
Part Number Application
BA 4888 Universal
• Adjustable tyre step for most light commercials and 4x4 vehicles• Ideal for windscreen repair | Mechanical repair | Roof rack loading | Vehicle
cleaning etc.• Sturdy steel construction.• Adjustment pins must
be locked in place.
23
SeriesTravel and Touring
Dog Guard Mesh Type
Part Number Application Brand
BA 076/2 Series OEM
50mm mesh, welded to a sturdy box section frame.Minimum effort required to install and easily removed by two thumb wheels when not in use. Acts as a cargo load divider.Can be used as gun rack support.Black nylon coated.
Gun / Umbrella Rack (Pair)
Part Number Application Brand
BA 087 Series Bearmach
Easy clip on installation to dog guard. Allows 3 guns or umbrellas to be carried one above the other.For use with BA 076/2 above.
High Foot Kit Non Lockable (Pair)
Part Number Application Brand
BA 3100 Series 3 Thule
Can double up as ski or bike racks with a simple attachment.
Roof Bars Standard (Pair)
Part Number Application Brand
BA 043 Series 3 Bearmach
24
Wheels & AccessoriesSeries
Wheel White 8 Spoke 15x8
Part Number Application Brand
BA 014B Series Bearmach
Wheel HD Steel (Wolf) 6.5x16
Part Number Application Brand
ANR4583R Series Bearmach
Wheel Anthracite Modular 16x7
Part Number Application Brand
BA 015CS Series Bearmach
Wheel Unpainted Standard Steel 16x5.5
Part Number Application Brand
BR 2240 Series Bearmach
Wheel White 8 Spoke 16x7
Part Number Application Brand
BA 015AS Series Bearmach
Wheel Silver 8 Spoke 16x7
Part Number Application Brand
BA 3403 Series Bearmach
Wheel Black Modular 16x7
Part Number Application Brand
BA 015DS Series Bearmach
Wheel Silver Modular 16x8
Part Number Application Brand
BA 015F Series Bearmach
25
Wheels & Accessories Series
Locking Wheel Nut (Set of 5 Steel Wheels)
Part Number Application Brand
BA 018B Series OEM
Supplied complete with individual keyed applicator for secure removal and fitting.
Locking Wheel Nut (Set of 5 Alloy Wheels)
Part Number Application Brand
BA 018C Series OEM
Supplied complete with individual keyed applicator for secure removal and fitting.
Locking Wheel Nuts (Set of 4 Steel Wheels)
Part Number Application Brand
BA 017A Series 3 OEM
Supplied complete with individual keyed applicator for secure removal and fitting.
Locking Wheel Nuts (Set of 4 Alloy Wheels)
Part Number Application Brand
BA 017C Series 3 OEM
Supplied complete with individual keyed applicator for secure removal and fitting.
Wheel Cover
Part Number Application Brand
BA 042HP 750x16 Hard plain Series 3 Bearmach
BA 042P 750x16 Vinyl plain Series 3 Bearmach
Seal Kit for Hub
Part Number Brand
BR 1272K AVM
BR 1273K AVMFree Wheeling Hubs (Pair)
Part Number Application Brand
BR 1272 Series 2a/3 (10 spline) AVM
BR 1273 Series 3 (24 spline) AVM
Ideal economy measure when four wheel drive is not required.Saves wear and tear on front axle.
26
Towing
For vario
us towing a
ccessories
see page 17
6-177
Series
Front Removable Tow Hitch
Part Number Application Brand
BA 3107 Series 3 Bearmach
Quick fit tow hitch, fits in seconds. Simply slip over the front bumper of your vehicle and tighten the two wing nut bolts for instant towing capability.Tow ball not included
Tow Hitch Adjustable
Part Number Application Brand
BA 190 Series 2a/3 Dixon Bate
Sturdily constructed adjustable tow hitch. Can be adjusted to five different heights.Tow ball not included
Towing Plate
Part Number Application Brand
BR 1233 Series 88”/109” Standard Bearmach
BR 1233L Series 88”/109” Long Bearmach
Heavy duty construction and zinc coated to keep them looking good. Available as fixed or adjustable and will accept our 50mm tow ball or universal coupling.Tow ball not included