series 4100 - belt/brush - metal finishing systems...series 4100 - heavy duty wet metal fitted for...
TRANSCRIPT
![Page 1: Series 4100 - Belt/Brush - Metal Finishing Systems...Series 4100 - Heavy Duty Wet Metal Fitted for medium to large plants, these high-production Timesavers easily handle multiple shifts](https://reader033.vdocuments.us/reader033/viewer/2022041603/5e325febd5676a3ebe231cb9/html5/thumbnails/1.jpg)
Series 4100 - Heavy Duty Wet Metal
Fitted for medium to large plants, these high-production
Timesavers easily handle multiple shifts of operation. Having
stainless steel construction in critical areas of wet machines
makes them the first choice among serious craftsmen.
These six wet-operation Series 4100, belt/brush machines are
available in 37" or 52" widths. Major features: integrated filter
and pump system, air knife dryer to keep parts clean and dry,
and wet operation that not only increases media life, but
improves finishing and deburring.
Series 4100 belt/brush features
• Digital thickness readout (on panel)• Hour meter• Main motor load meter• Motorized lift• Four bed jacks• Infeed stop bar• UL listed controls• Dial indicators on drums (cam adjustable)• Disc brakes on main motor• Double infeed & outfeed holddown rolls• 15-65 FPM feed speed A/C (reversing)• Auto set up device• Air knife dryer• Conveyor belt tracking• Coolant/filter system integrated• Stainless steel construction where needed• 0-3" opening (variable passline)• 27" infeed loading area• Quick release outboard support• Through-beam abrasive belt tracking
Options• Brush exchange unit• 220/208 volt transformer
®
Auto Setup Device
A Closer Look:
Contact Roller
Series 4100 - Belt/Brush2 to 4 Heads, 37" or 52" Widths
![Page 2: Series 4100 - Belt/Brush - Metal Finishing Systems...Series 4100 - Heavy Duty Wet Metal Fitted for medium to large plants, these high-production Timesavers easily handle multiple shifts](https://reader033.vdocuments.us/reader033/viewer/2022041603/5e325febd5676a3ebe231cb9/html5/thumbnails/2.jpg)
Series 4100 - Belt/Brush
Metal Product Offering CodesIdentify your machine’s model number using the codes listed below.
4 - Heavy Duty 1 - Metal Wet 234
1 - Top 2 - 75" 3 - 37"5 - 52"
Head Types0 - Drum
4 - Oscillating Brush
Use the chart above and the boxes below, to find the model number of your machine. In each box, write in the number from the corresponding section inthe chart. The following is an example of a model number and what it represents:
4131-25-004 = Heavy duty, metal wet machine, triple head, top, 75" belt, 52" wide with two drums and oscillating brush
A.Series
B. Application
C.# of Heads
D.Top/Bot
E.Belt length
F.MachineWidth
G.Head #1
H.Head #2
I.Head #3
J.Head #3
To find your model number, fill in the following boxes with the numbers from the corresponding section of the chart above.
A. B. C. D. E. F. G. H. I. J.
S41WB-0601-NA
®
Timesavers, Inc.5270 Hanson Court • Minneapolis, Minnesota 55429-3161 • Toll-free: 800-537-3611 • 763-537-3611 • Fax 763-537-9247
Internet: www.timesaversinc.com • E-mail: [email protected]
Timesavers International B.V.Fruitlaan 20-30 • 4462 EP Goes • The Netherlands • Phone: +31 113 238911 • Fax: +31 113 232003
Internet: www.timesaversint.com • E-mail: [email protected]
4 1 1 2
ModelNumber
Head Type Number ofHeads
Drum/BrushDiameter
Horsepower Full Load Amps@ 460 Volts
MinimumPart Length
Compressed AirRequired @ 90psi
Weight(lbs.)
Belt Length
4121-23-04 drum, brush 2 11", 11" 25, 25 11" 82 4 6850 75"
4121-25-04 drum, brush 2 11", 11" 30, 25 11" 87 4 7950 75"
4131-23-004 drum, drum, 3 7", 11", 11" 25, 25, 25 11" 112 6 9050 75"brush
4131-25-004 drum, drum, 3 7", 11", 11" 30, 30, 25 11" 122 6 10150 75"brush
4141-23-0044 drum, drum, 4 7", 11", 25, 25, 11" 139 8 11100 75"brush, brush 8", 8" 25, 25
4141-25-0044 drum, drum, 4 7", 11", 30, 30, 11" 151 8 12125 75"brush, brush 8", 8" 25, 25