september 17, 2014 wednesday morning 08:30-12:00
TRANSCRIPT
FINAL PROGRAM
THE 18TH WORLD CONGRESS OF CIGR
AGRICULTURAL AND BIOSYSTEMS ENGINEERING - UPGRADING THE QUALITY OF OUR LIFE
SEPTEMBER 16TH-19TH, 2014
BEIJING, CHINA
9
GENERAL INFORMATIONVENUEChina National Convention Center (CNCC)Address:No.7 Tianchen East Road, Olympic Green, Chaoyang District, Beijing 100105, China
WEATHERThe weather in mid-September in Beijing is comparatively moderate and the average day temperature is about 15-27ºC (55-80 ºF).
ARRIVAL IN BEIJINGThe Congress will not arrange the pick-up services at the Beijing Capital International Airport. Participants could take the taxi, Beijing Airport Express (shuttle bus) and Beijing Subway Airport Line to CNCC and the hotels you booked.
The taxi service is available at the Capital Airport during the whole day.
In addition, you could take Beijing Airport Express Line 6 and get off at the station of Best Western OL Stadium Hotel. Participants can take Beijing Airport Express Line 5 and get off at the station of YA YUN CUN to arrive at Yayuncun hotel. The operation time for Beijing Airport Express Line 5 and 6 is 7:00-24:00, 8:00-21:00, and each bus will depart from the airport in every 30-40 minutes. The bus tickets are available at the Beijing Airport Express Station of the Beijing Capital International Airport Terminal 1, 2 and 3, and it will cost about RMB 20.00 Yuan (US$ 3.1) per person.
For Beijing Airport Express Services, please call: +86 10 64573891 / 64594376 / 64594375.
To take the Beijing Subway, please first take Beijing Subway Airport Line and transfer to Beijing Subway Line 10 at the San Yuan Qiao Station, and transfer to Line 8 at the Bei Tu Cheng Station and get off at Olympic Green Station and get out at Exit E, which is around 0.5 km (0.3 mile) away from CNCC and CNCC Grand hotel. For the people who need get to other hotel or locations, please transfer to other local public transportations. The operation time for Beijing Airport Subway Line is 6:21-22:51(T3), 6:35-23:10(T2), it will cost RMB 25.00 Yuan (US$ 4.1) per person. The operation time for Beijing Subway Line 10 and Line 8 is 4:50-00:20 and 5:30-23:00, which costs RMB 2.00 Yuan (US$ 0.33) per person.
For more information about Beijing Subway, please call: + 86 10 96165
10
ACCOMMODATION
CNCC Grand Hotel (four-star hotel, 8 min on foot to CNCC)Building 1, No. 8 Precincts, Beichen West Road, Chaoyang District, Beijing 100105Tel: 400 698 2008 / +86 10 84372008 Fax: +86 10 84370387Best Western OL Stadium Hotel (four-star hotel, 30 minutes on foot and 3 min by taxi to CNCC)No. 1 Datun Road, Beishatan, Beijing 100101Tel: +86 10 64874433 Fax: +86 10 64873545Yayuncun Hotel (three-star hotel, 10 min by taxi to CNCC)No. 8 Beichen East Road, Chaoyang District, BeijingTel: +86 10 649911997 Days Inn (express inn, 12 min by taxi to CNCC)No. 1 Beishatan, Deshengmen Wai, Chaoyang District, Beijing 100083Tel: +86 10 64870977
INSURANCEThe registration fees do not include insurance for the participants regarding accidents, sickness or loss of personal property. You are advised to make necessary arrangement for a short-term health and accident insurance before leaving your home country.
CURRENCY EXCHANGEIn China, only RMB is used. Exchange centers can be found at airports, hotels, banks and tourist shopping centers. The exchange rate is now about US$1.00=6.16Yuan. When changing money, you should keep your receipt in case you want to change any RMB back to foreign currency when leaving China. Credit cards (Visa, Master, American Express, Diners Club) are accepted in many department stores and hotels. It is possible to draw cash from ATM machine with credit cards.
The Bank of China and the most of the hotels can cash traveler’s check issued by most foreign banks or financial institutions. You need to show your passport and bare 4% commission charge.
REGISTRATION DESKThe registration desk will be set up in the open place on the 1st floor near the Delegates Access Gate C2 of CNCC at the following hours:
11
15th, Sept. (Mon) 08:00-20:00 16th, Sept. (Tue) 08:00-18:0017th, Sept. (Wed) 08:00-18:00 18th, Sept. (Thu) 08:00-18:00Participants are requested to go to the registration desk for registration and picking up the Congress kit.
SPEAKER READY ROOMA speaker ready room will be set up in the open place on the 3rd floor near the Business Center of CNCC, where participants could access the information for oral presentation schedule and relative moderator arrangement of the Congress. By using the computer in speaker ready room, participants who will give the oral lecture in each section could transfer their lecture slides to the terminal computer in their lecture room and rehearsal their slides in the Congress computer system.
PRESENTATION FACILITIESComputers and projectors will be available in all Congress halls and meeting rooms. The Congress Committee recommends that oral presentations are made using Microsoft PowerPoint.
SPECIAL REQUESTAll the participants should set their mobile phones at vibration mode during oral presentation sessions.
NAME BADGESAll delegates are required to wear their issued name badges at all time as the name badge is the identification to participate scientific sessions, the opening ceremony and reception.
TICKET FOR LUNCHLunch tickets, Chinese Cultural Night tickets are available at registration.
TEA AND COFFEE BREAKSTea and coffee breaks will be served outside the Congress halls and meeting room on the 3rd and 4th floor of CNCC.
MEDICAL SERVICESino-Japanese Friendship Hospital is located 5.8 km (3.6 miles) south of CNCC. Call the attendant of the hotel or call the staff of the Secretariat of 2014 World Congress of CIGR for assistance in case of medical needs. The telephone number of the City Emergency Center is 120.
12
POST OFFICEA nearby post office is located at No.4 East Road Kexueyuannanli. You may also leave your airmails at the Front Desks of the hotels where you put up and the hotel attendants will mail them out for you.
CHINESE CULTURAL NIGHT -CHINA ICEPOWERChinese Cultural Night will be held in the evening of 17th Sept., starting from 19:30, at Beijing Performance & Arts Centre (One block south away from CNCC), which is the big event to present the Chinese traditional culture and shows including Beijing Opera, Chinese traditional dancing, Performing Monkey Show, Chinese folk music, etc. Chinese Cultural Night is free for all the Congress participants and everyone is welcome to attend the event.
13
OPENING CEREMONY (With simultaneous translation)
Time: 09:30-10:00 Sept. 16th (Tuesday), 2014
Venue: Plenary Hall B, the 4th Floor of CNCC
Chair:
09:30–09:35
09:35–09:40
09:40–09:45
09:45–10:00
10:00–10:10
Prof. LI Shujun,
Chair announces the opening of the congress and introduces
the distinguished leaders and guests
Address by Prof. Da-Wen SUN, President of CIGR
Address by the leader from China Association for Science and
Technology
Address by a high-ranking official from the Chinese Government
Tea Break
Chair of the Organizing Committee of the 18th
World Congress of CIGR, President of Chinese
Academy of Agricultural Mechanization Sciences
(CAAMS)
14
PLENARY KEYNOTE SESSION(With simultaneous translation)
Time: 10:10-12:30 Sept. 16th (Tuesday), 2014 Venue: Plenary Hall B, the 4th Floor of CNCCChairs:
10:10–10:40
10:40–11:10
11:10–11:40
11:40–12:10
Prof. Da-Wen SUN, President of CIGRProf. ZHU Ming,
Agricultural Soil Mechanics and Management Prof. Richard John Godwin
Sustainable Animal Production Prof. Norman R. Scott
The Global Role of Agricultural Machinery Industry Dr. Hermann Garbers
Progress of Agricultural Machinery Industry and Agricultural Mechanization in ChinaProf. LI Shujun
President of Chinese Association of Agricultural Engineering (CSAE), Chinese Academy of Agricultural Engineering (CAAE)
Honorary Professor of the Czech University of Life Sciences, Visiting Professor of Harper Adams University, member of Royal Academy of Engineering
Prof. of Cornell University, member of National Academy of Engineering, USA
Chairman of VDMA (German Engineering Federation - Agricultural Machinery Division)
President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS), President (2010-2013) of Asian Association for Agricultural Engineering (AAAE)
15
WELCOME RECEPTION(With interpretation)
Time: 19:00-21:00 Sept. 16th (Tuesday), 2014Venue: Plenary Hall A, the 4th Floor of CNCCChair:
19:00–19:05 19:05–19:10
19:10–19:15 19:15-19:20
CHINESE CULTURAL NIGHT - CHINA ICEPOWER
Time: 19:30-21:30 Sept. 17th (Wednesday), 2014 Venue: Beijing Performance & Arts Centre
For the purpose of presenting the authentic Chinese culture and enriching delegates’ limited days in Beijing, a glamorous cultural night is going to be held at 19:30, Sept.17th for all the delegates of the 18th World Congress of CIGR. Please join us for this special night for free!
The cultural night will be held in the Beijing Performance & Arts Centre, which is located to the south of the China National Convention Centre (CNCC), the Congress venue. After listening to the oral reports, delegates could have a nice 5-minute walk there to enjoy a memorable night.
There will be amazing shows and traditional Chinese art at this night. The 2-hour performance will give you a clear picture of the typical Chinese culture.
Chinese Cultural Night is sponsored by China Icepower Energy Technology Co., Ltd.
Prof. LI Shujun,
Welcome by the ChairAddress by Prof. LUO Xiwen, President of Chinese Society for Agricultural Machinery (CSAM) on behalf of CSAM and CSAEAddress by Mr. Terry Howell, Jr., the President of American Society of Agricultural and Biological Engineers (ASABE)Address by Prof. Peter Schulze Lammers, the past president of The European Society of Agricultural Engineers (EurAgEng)
Chair of the Organizing Committee of the 18th
World Congress of CIGR, President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS)
16
CLOSING CEREMONY(With interpretation)
Time: 16:00-17:00 Sept. 18th (Thursday), 2014Venue: Room 309A+B, the 3rd Floor of CNCCChair:
16:00–16:05 16:05–16:20
16:20–16:30
16:30–16:40
16:40–16:5016:50–17:00
GALA DINNER(With interpretation)
Time: 19:00-21:00 Sept. 18th (Thursday), 2014 Venue: Plenary Hall A, the 4th Floor of CNCCChair:
19:00–19:05 Welcome by the Chair19:05–19:10 Address by the leader from China Agricultural University 19:10–19:25 Addresses by the representatives of the financial supporters
Prof. Tadeusz Juliszewski, Incoming President of CIGR (2015-2016)
Chair announces the start of Closing CeremonyReport on the 18th World Congress of CIGR by Prof. LI Shujun, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of CAAMSSpeech by Prof. Can Ertekin, Co-Chair of the Organizing Committee of the 19th World Congress of CIGR, TurkeySpeech by Prof. Søren Pedersen, PPT by Dr. Morten Dam Rasmussen, Co-Chairs of the Organizing Committee of the International Conference 2016 in Aarhus, DenmarkAddress by Prof. Fedro Zazueta, Past President of CIGRClosing Ceremony ends
Prof. ZHU Ming, Chair of the Organizing Committee of the 18th
World Congress of CIGR, President of Chinese Academy of Agricultural Engineering (CAAE)
17
SPECIAL PROGRAM
Working Meetings of CIGR(September 15-17, 2014)
Meeting of CIGR Presidium Monday, September 15, 09:00-13:30HLocation: Room B210-211, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Second Floor)This is a closed meeting attended by CIGR presidium members only.
Meeting of CIGR Executive Board Monday, September 15, 14:00-17:00HLocation: Room A606, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Sixth Floor)This is a closed meeting attended by the members of CIGR Executive Board only.
Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 303A, China National Convention Center (CNCC) (Third Floor)
Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)
Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room 305, China National Convention Center (CNCC) (Third Floor)
Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30HLocation: Room VIP3-2, China National Convention Center (CNCC) (Third Floor)
Meeting of CIGR Section I Board Wednesday, September 17, 13:00-15:00HLocation: Room 409, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section I Board only.
Meeting of CIGR Section II Board Tuesday, September 16, 13:00-15:00HLocation: Room 406, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section II Board only.
18
Meeting of CIGR Section III Board Tuesday, September 16, 13:00-15:00HLocation: Room 407, China National Convention Center (CNCC) (Fourth Floor)This is a closed meeting attended by the members of CIGR Section III Board only.
Meeting of CIGR Section IV Board Tuesday, September 16, 13:00-15:00HLocation: Room 305, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section IV Board only.
Meeting of CIGR Section V Board Tuesday, September 16, 13:00-15:00HLocation: Room 303A, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section V Board only.
Meeting of CIGR Section VI Board Tuesday, September 16, 13:00-15:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section VI Board only.
Meeting of CIGR Section VII Board Tuesday, September 16, 13:00-15:00HLocation: Room VIP3-2, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Section VII Board only.
Meeting of CIGR Journal Tuesday, September 16, 15:00-17:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is an open meeting for all participants.
Meeting of CIGR Technical Board Tuesday, September 16, 17:00-20:00HLocation: Room 303B, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by the members of CIGR Technical Board only.
CIGR Awards CeremonyWednesday, September 17, 16:30-17:20HLocation: Room 309A, China National Convention Center (CNCC) (Third Floor)
Meeting of CIGR General AssemblyWednesday, September 17, 17:30-19:00HLocation: Room 309A, China National Convention Center (CNCC) (Third Floor)This is a closed meeting attended by CIGR members only.
19
OVERVIEW OF CIGR WORKING MEETINGS AT THE 18th WORLD CONGRESS OF CIGR
Date Time Meeting
15-Sept.
09:00-13:30CIGR Presidium meetingLocation: Room B210-211, No. 31 Building, CAAMS
14:00-17:00Executive Board meetingLocation: Room A606, No. 31 Building, CAAMS
16-Sept.
10:00-11:30
Working Group meeting Location: Room 303A, CNCC
Working Group meeting Location: Room 303B, CNCC
Working Group meeting Location:Room 305, CNCC
Working Group meeting Location: Room VIP3-2, CNCC
13:00-15:00
Section Board II meeting Location: Room 406, CNCC
Section Board III meetingLocation: Room 407, CNCC
Section Board IV meeting Location: Room 305, CNCC
Section Board V meeting Location: Room 303A, CNCC
Section Board VI meeting Location: Room 303B, CNCC
Section Board VII meeting Location: Room VIP3-2, CNCC
15:00-17:00 Journal MeetingLocation: Room 303B, CNCC
17:00-20:00 Technical Board meetingLocation: Room 303B, CNCC
17-Sept.
13:00-15:00 Section Board I meeting Location: Room 409, CNCC
16:30-17:20 CIGR Awards Ceremony Location: Room 309A, CNCC
17:30-19:00 CIGR General Assembly Location: Room 309A, CNCC
20
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION I LAND AND WATER ENGINEERINGSPECIAL SESSION: CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP PROJECT WORKSHOP
SESSION II FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT
SESSION III EQUIPMENT ENGINEERING FOR PLANTS
SESSION IV ENERGY IN AGRICULTURE
SESSION V DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM MANAGEMENT
SESSION VI POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERINGSPECIAL SESSION: RESEARCH AND DEVELOPMENT OF PLANT RESOURCES
SESSION VII INFORMATION SYSTEMS
SESSION VIII AGRICULTURAL MACHINERY STANDARDIZATION
SESSION IX ASIA FORUM
21
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION I
LAND AND WATER ENGINEERING
22
Mon
day,
Se
pt. 1
508
:00-
20:0
0R
egis
tratio
n Lo
catio
n:th
e op
en p
lace
on
the
1st fl
oor n
ear t
he D
eleg
ates
Acc
ess
Gat
e C
2, C
NC
C
Tues
day,
Se
pt. 1
6
09:3
0-10
:00
Ope
ning
Cer
emon
y Lo
catio
n:Pl
enar
y H
all B
, CN
CC
10:0
0-10
:10
Tea
Bre
ak
10:1
0-12
:30
Con
gres
s Ple
nary
with
Invi
ted
Spea
kers
Lo
catio
n:Pl
enar
y H
all B
, CN
CC
12:3
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pre
sent
atio
n Lo
catio
n: 3
06A
+B,C
NC
C
15:0
0-15
:15
Tea
Bre
ak
15:1
5-17
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pre
sent
atio
n Lo
catio
n: 3
06A
+B,C
NC
C
19:0
0-21
:00
Wel
com
e R
ecep
tion
Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
08:3
0-10
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03A
+B,C
NC
C
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
10:0
0-10
:15
Tea
Bre
ak
10:1
5-12
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03A
+B,C
NC
C
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Ove
rvie
w o
f Se
ssio
n I:
Lan
d an
d W
ater
Eng
inee
ring
23
Mon
day,
Se
pt. 1
508
:00-
20:0
0R
egis
tratio
n Lo
catio
n:th
e op
en p
lace
on
the
1st fl
oor n
ear t
he D
eleg
ates
Acc
ess
Gat
e C
2, C
NC
C
Tues
day,
Se
pt. 1
6
09:3
0-10
:00
Ope
ning
Cer
emon
y Lo
catio
n:Pl
enar
y H
all B
, CN
CC
10:0
0-10
:10
Tea
Bre
ak
10:1
0-12
:30
Con
gres
s Ple
nary
with
Invi
ted
Spea
kers
Lo
catio
n:Pl
enar
y H
all B
, CN
CC
12:3
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pre
sent
atio
n Lo
catio
n: 3
06A
+B,C
NC
C
15:0
0-15
:15
Tea
Bre
ak
15:1
5-17
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pre
sent
atio
n Lo
catio
n: 3
06A
+B,C
NC
C
19:0
0-21
:00
Wel
com
e R
ecep
tion
Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
08:3
0-10
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03A
+B,C
NC
C
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
10:0
0-10
:15
Tea
Bre
ak
10:1
5-12
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03A
+B,C
NC
C
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
13:3
0-15
:00
Key
note
Spe
eche
s & T
echn
ical
Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03A
+B,C
NC
C
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
15:0
0-15
:15
Tea
Bre
ak
15:1
5-17
:00
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n: 3
03A
+B,C
NC
CTh
e Si
no-U
S W
ater
Sav
ing
Tech
nolo
gy F
lags
hip
Proj
ect W
orks
hop
Loca
tion:
305
,CN
CC
19:3
0-21
:30
Chi
nese
Cul
tura
l Nig
ht
Loca
tion:
Bei
jing
Perf
orm
ance
& A
rts C
entre
Thur
sday
, Se
pt. 1
8
08:3
0-10
:00
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n: 3
03A
,CN
CC
Tech
nica
l Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03B
,CN
CC
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
10:0
0-10
:15
Tea
Bre
ak
10:1
5-12
:00
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n: 3
03A
,CN
CC
Tech
nica
l Ora
l Pr
esen
tatio
n Lo
catio
n: 3
03B
,CN
CC
The
Sino
-US
Wat
er S
avin
g Te
chno
logy
Fla
gshi
p Pr
ojec
t Wor
ksho
p Lo
catio
n: 3
05,C
NC
C
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n: 3
03A
,CN
CC
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n:30
3B,C
NC
C
15:0
0-15
:15
Tea
Bre
ak
15:1
5-16
:00
Tech
nica
l Ora
l Pre
sent
atio
n Lo
catio
n: 3
03A
,CN
CC
16:0
0-17
:00
Clo
sing
Cer
emon
y Lo
catio
n:30
9A, C
NC
C
19:0
0-21
:00
Gal
a D
inne
r Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Frid
ay,
Sept
. 19
08:0
0-15
:00
Tech
nica
l Tou
rs
24
SESSION I
LAND AND WATER ENGINEERING
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-17:00
Location: Room 306 A-B, the 3rd Floor of CNCCChairs: Prof. Luis SantosPereira, University of Lisbon, Portugal Prof. Shaozhong Kang, China Agricultural University, China
15:00-15:15 Tea Break
Location: Room 306 A-B, the 3rd Floor of CNCCChairs: Dr. Gerrit J. Carsjens, Wageningen University, The Netherland Prof. Guanhua Huang, China Agricultural University, China
Time Paper # Technical Presentations
13:30-14:00 0826-118
Improving agricultural water use efficiency by understanding physiological mechanismShaozhong KangChina Agricultural University, China
14:00-14:30 0826-119
Evapotranspiration, irrigation requirements and modelling: issues for agricultural water management Luis S. Pereira University of Lisbon, Portugal
14:30-14:45 2014-0437Food in space: the spatial organization of food systemsGerrit J. CarsjensWageningenUniversity, The Netherland
14:45-15:00 2014-1331
Parameterization and calibration of the Aquacrop model for assessing soybean biomass and yield application in the north China plainYu Liu, Xin YanInstitute of Water Resources and Hydropower Research, China
25
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:00
Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Tammo Steenhuis, Cornell University, USA Prof. Yaohu Kang,
Time Paper # Technical Presentations
15:15-15:30 2014-1027
Assessing irrigation water management using trend analysis and autocorrelationAmadou KeitaInternational Institute for Water and Environmental Engineering (2iE), Burkina Faso
15:30-15:45 2014-1356
Hydro-tech: an automated smart-tech decision support tool for eco-efficient irrigation managementMladenTodorovic, Vito Cantore, Erminio E. Riezzo, Vito Buono, Mario Zippitelli, Angelo Galiano, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy
15:45-16:00 0826-120
Deficit irrigation for improving fruit quality and food security in arid Northwest ChinaTaisheng DuChina Agricultural University, China
16:00-16:15 0826-121
Assessment of irrigation efficiency based on remotely sensed evapotranspiration in an arid irrigation districtSonghao Shang, Yuting Yang, Lei JiangTsinghua University, China
16:15-16:30 0826-122
Physiological parameters variations in olive tree (oleaeuropaea l., cv. arbequina) under different irrigation regimes in uruguayClaudio GarcíaInstitutoNacional de InvestigaciónAgropecuaria (INIA), Uruguay
16:30-16:45 0826-123
Assessing “developing a water-saving society” policy for the Heihe river basin in China: a structural decomposition analysis approachJunguo Liu, Xu Zhao, Qingying Liu, Guodong Cheng, Honglang XiaoBeijing Forestry University, China
16:45-17:00 0507-003Determination of young olive-tree water consumption with drainage lysimetersGarcía Petillo MarioUniversidad de la República, Uruguay
Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China
26
Time Paper # Technical Presentations
08:30-09:00 0826-124
Is increasing irrigation efficiency a panacea for sustainable water resources managementTammo SteenhuisCornell University, USA
09:00-09:15 0618-110
Soil water-salt management methods, agricultural utilization and vegetation construction theories under drip irrigation in saline-sodic soilsYaohu Kang, ShuqinWan,Yanping Jiao, Junli Tan, Shuhui Liu, Ruoshui Wang, Jiaxia Sun, Tibin Zhang, Xiulong Chen, Xiaobin Li, Shufang Jiang, Wu Hu, Zheqiang Sun, Zhu Xue, Shiping LiuInstitute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China
09:15-09:30 0618-117
Three models for applications of drip irrigation in Hetao irrigation areas of Inner MongoliaJian Yu, Jinzhong Yang, Kezheng Guo, Zhongyi Qu, Jigang ShiWater Resources Research Institute of Inner Mongolia, China
09:30-09:45 2014-0219Field assessment of basin irrigation performance in Hetao, Inner MongoliaJosé Manuel Gonçalves, Qingfeng Miao, Haibin Shi, Luis S. PereiraUniversity of Lisbon, Portugal
09:45-10:00 0826-125
Minimizing non-productive water use through partitioning soil evaporation from evapotranspiration in north china plainDaozhi GongChineseAcademy of Agricultural Sciences, China
Time Paper # Technical Presentations
10:15:10:45 0826-126
Modeling of vadose zone processes and applications to agricultural productivity and environmental sustainabilityJirka ŠimunekUniversity of California – Riverside, USA
10:45-11:00 2014-0388Stemflow of maize and its influencing factorsHaijun Liu, Liwei ZhangBeijing Normal University, China
11:00-11:15 0826-134
Water requirement with irrigation expansion in Jingtai irrigation district, Northwest China: the need to consider irrigation-induced local changes in evapotranspiration demandSongjun Han, Di Xu, Shaoli Wang, Zhiyong YangInstitute of Water Resources and Hydropower Research, China
10:00-10:15 Tea Break
Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Jirka Šimunek, University of California – Riverside, USA Dr. Xiaomin Mao, China Agricultural University, China
27
Time Paper # Technical Presentations
13:30-14:00 0826-128Source zone remediation of chlorinated solvents in groundwater Andrew D. Barry Ecole polytechnique fédérale de Lausanne (EPFL), Switzerland
14:00-14:15 2014-0257
Wastewater reuse in irrigation - treatment for antibiotic removalIsabel Maria Nunes da Rosa Dias Duarte, Maria Paula Pinto Amador, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, MárioAntónio Vale e Pina Barreto, Maria Cristina Prudêncio Pereira SoareEscola Superior Agrária de Coimbra, Portugal
14:15-14:30 0826-129
Research progress on safe and high quality food production using reclaimed water irrigation technologies Xuebin Qi, Zongdong Huang, Ping Li, Dongmei Qiao, Wei GuoFarmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China
14:30-14:45 2014-0258
Wastewater reuse in irrigation - antibiotic resistance risk Maria Paula Pinto Amador, Isabel Maria Nunes da Rosa Dias Duarte, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, MárioAntónio Vale e Pina Barreto, Maria Cristina Prudêncio Pereira SoaresEscola Superior Agrária de Coimbra, Portugal
11:15-11:30 2014-0971
Evaluation of water use efficiency in irrigated agriculture supported by satellite imagesEnrique PalaciosColegio de Postgraduados, Mexico
11:30-11:45 2014-0626
Spatial variability of seasonal ETo computed with full and reduced datasets in Inner Mongolia, China: an assessment of temperature methodsZhongyi Qu, Xiaodong Ren, D. S. Martins, Luis S. PereiraInner Mongolia Agricultural University, China
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-17:00
Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Andrew D. Barry, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland Prof. Xuebin Qi, Farmland Irrigation Research Institute, Chinese Academy of
Agricultural Science and the Ministry of Water Resources, China
28
14:45-15:00 2014-1219
Transportation and transformation of nitrate during surface- spreading aquifer recharge system: a laboratory soil columns experimentWeiyan Pan, Quanzhong Huang, Guanhua Huang, Xu Xu, Ziyuan Zhang, Bingqian LiuChina Agricultural University, China
15:00-15:15 Tea Break
Location: Room 303 A-B, the 3rd Floor of CNCCChairs: Prof. Thomas J. Trout, USDA- Agricultural Research Service, USA Prof. Qiang Fu, Northeast Agricultural University, China
Time Paper # Technical Presentations
15:15-15:45 2014-1298
Technologies to manage limited irrigation water supplies and sustain irrigated agricultureThomas J. TroutUSDA- Agricultural Research Service, USA
15:45-16:00 0618-116
Evaluating the usefulness of ligand addition on phytoextraction of Cd-polluted soil using a mechanistic modelZhongbing Lin, André Schneider, Christophe Nguyen, Thibault SterckemanWuhan University, China
16:00-16:15 0618-105
Reclaimed municipal wastewater irrigation reduced the amount of nitrogen fertilizer and primed rhizosphere soil nitrogen supplying capacityPing Li, Xuebin Qi, Chao Hu, Zhijuan Zhao, Xiangyang Fan, Jianjun Chen,Farmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China
16:15-16:30 2014-1034
Effects of irrigation with domestic treated wastewater on the some soil chemical propertiesMehmet Gündüz, Nil Korkmaz, Serafettin ASIKInternational Agricultural Research and Training Center, Mexcio
16:30-16:45 0618-106
Distribution behavior and leachability of polycyclic aromatic hydrocarbons (Pahs) in Hunpu wastewater irrigation area, ChinaSong Cui, Qiang Fu Northeast Agricultural University, China
16:45-17:00 0826-130
Effect of drip irrigation schemes and water quality of sewage effluent on soil chemical properties and tomato yieldYanfeng LiInstitute of Water Resources and Hydropower Research, China
29
Time Paper # Technical Presentations
08:30-08:45 2014-0764
A simple model for determining salt leaching cycle in subhumid regions under controlled drainageWan Luo, Shan LiXi’An University of Technology, China
08:45-09:00 0509-020
A ten-year field experimental study on the effectiveness of dry drainage in soil salinity controlJingwei Wu, MousongWuWuhan University, China
09:00-09:15 0514-015
Drainage and salinity problems in the Mexican irrigation districts: an overview 1962-2013Óscar Luis Palacios-VélezCampus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Mexico
09:15-09:30 0826-131
Nitrogen and phosphorus loss and optimal drainage time of paddy field under controlled drainage conditionMenghua XiaoJiangsu University, China
09:30-09:45 0826-132
Influences of additional N fertilizer after heavy rains on growing and yield of maize in North China plainYanqun Zhang, Jiandong Wang, Shihong Gong, Juan Sui, Jingping YangInstitute of Water Resources and Hydropower Research, China
09:45-10:00 2014-1460
Numerical simulation of nitrate nitrogen migration in an agricultural activity area with water table fluctuationShifeng LiChina Agricultural University, China
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-12:00
Location: Room 303 A, the 3rd Floor of CNCCChairs: Dr. Mladen Todorovic, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy Prof. Wan Luo, Xi’An University of Technology, China
30
10:00-10:15 Tea Break
Location: Room 303 A, the 3rd Floor of CNCCChairs: Prof. Yoshiyuki Shinogi, Kyushu University, Japan Prof. Jingwei Wu, Wuhan University, China
Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. Shamaila Zia, Universität Hohenheim, Germany Prof. Taisheng Du, China Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-1560
Hyperspectral analysis on traces of chlorpyrifos in paddy fields discharged waterYali Zhang, Xiwen Luo, Long Ma, Ruijun Ma, Haijian ZhanSouth China Agricultural University, China
10:30-10:45 0826-133Modelling soil water flow and solute transport through layered soilXiaomin MaoChina Agricultural University, China
10:45-11:00 2014-0660Rice-husk biochar potential to affect rice growth and soil moistureEndita Prima Ari Pratiwi, Yoshiyuki ShinogiKyushu University, Japan
11:00-11:15 2014-0794Contribution of groundwater to crop water use in deficit irrigation fieldZailin Huo, Xiaoyu GaoChina Agricultural University, China
11:15-11:30 2014-1234
The effect of n fertilization on yields and nitrogen efficiencies in a four-year wheat/maize cropping practiceYan Li, Guanhua HuangChina Agricultural University, China
11:30-11:45 2014-1386
Field calibration of a cosmic-ray neutron probe for hectar-scale soil moisture detectionShamaila Zia, Francisco Miguel Aguila Marin, Yang Pengnian, Wolfram Spreer, Joachim MüllerUniversität Hohenheim,Germany
11:45-12:00 2014-1552
Water and salt dynamics during autumn irrigation and freeze/thaw periods calculated by flux balance method and SHAW modelXiao Tan, Mousong Wu, Jiesheng Huang, Jingwei Wu, Jingjing LiuWuhan University, China
31
10:00-10:15 Tea Break
Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. José Manuel Gonçalves, Instituto Politécnico de Coimbra, Portugal Prof. Junguo Liu, Beijing Forestry University, China
Time Paper # Technical Presentations
10:15-10:30 2014-0217
Modernizing surface irrigation and land levelling in Hetao with application of the DSS SADREGJosé Manuel GonçalvesUniversity of Lisbon, Portugal
10:30-10:45 0826-135Field evaluation of water distribution for variable rate irrigation systemJiusheng Li, Weixia ZhaoInstitute of Water Resources and Hydropower Research, China
Time Paper # Technical Presentations
08:30-08:45 2014-1535
Cost-benefit analysis of using sprinkler and drip irrigation systems for tomato production under soilless farming and greenhouse conditionAlagha Samuel Adelanke, Jinadu OlugbengaRufus Giwa Polytechnic, Nigeria
08:45-09:00 2014-0295Response of potato to drip and gun irrigation systemsZhenjiang Zhou, Mathias Neumann Andersen, Finn Plauborg, OveEdlefsenAarhus University, Denmark
09:00-09:15 2014-1235
Effects of regulated deficit irrigation on the yield, quality and water productivity of tomato in an arid region of Northwest ChinaJianhua Zheng, Guanhua HuangChina Agricultural University, China
09:15-09:30 2014-1126Study on adaptive capacity of agricultural technology to climate changeZhifenZhai, Jianhua ZhangChinese Academy of Agricultural Engineering, China
09:30-09:45 2014-0374
Evaluating WEPP predictions of runoff and soil losses on a hillslope in the loess plateau region of ChinaShuangcheng Tang, Wan LuoXi’An University of Technology, China
09:45-10:00 0826-136
Improving soil moisture and evapotranspiration estimation by data assimilation and remote sensing data over irrigated cropland in the Northern China plainHe ChenInstitute of Water Resources and Hydropower Research, China
32
10:45-11:00 2014-1233
Variation of leaf water potential in orychophragmus violaceus based on regulation of carbonic anhydrase under osmotic stressDeke Xing, Yanyou WuInstitute of Geochemistry Academy of Sciences, China
11:00-11:15 2014-0744
Research on the key way to achieve best match of irrigation and arable land in ChinaBangbang ZhangChina Agricultural University, China
11:15-11:30 0507-002
Management width border-check irrigation to enhance water application on a field pastureClaudio GarcíaInstituto Nacional de Investigación Agropecuaria (INIA),Uruguay
11:30-11:45 2014-0628
Assessment of daily ETo estimation with the hargreaves-samani and the penman-monteith temperature methods in Inner Mongolia, ChinaXiaodong Ren, D. S. Martins, Zhongyi Qu, Luis S. PereiraInner Mongolia Agricultural University, China
11:45-12:00 0826-137Modeling canopy resistance from climatic variables for predictingHaofang Yan, Haibin Shi, Oue Hiroki, Chuan ZhangJiangsu University, China
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-15:00
Location: Room 303 A, the 3rd Floor of CNCCChairs: Prof. Luis Pimentel-Bribiesca, Universidad Autónoma Chapingo, Mexico Dr. Songhao Shang, Tsinghua University, China
Time Paper # Technical Presentations
13:30-13:45 2014-1528Watershed correction for a better water harvestingLuis Pimentel-BribiescaUniversidad Autónoma Chapingo, Mexico
13:45-14:00 0618-107
The research on health evaluation index system of water-based system in watershedZhenxiang Xing, Jing Li, Qiang Fu, Hao Guo, Yi JiNortheast Agricultural University, China
33
14:00-14:15 2014-0917
Effect of climate change on hydrological conditions in rapid urbanization regions: a case study in the Taihu basin, ChinaLiu Liu, Zongxue XuChina Agricultural University, China
14:15-14:30 0618-055
Simulation of streamflow components using soil water assessment tool (SWAT) modelTingmin Yu, Marenya MosesARC, South Africa
14:30-14:45 2014-1104
Crop planting structure uncertainty and multi-objective programming modelsMo Li, Ping Guo, Liudong ZhangChina Agricultural University, China
14:45-15:00 2014-1306
Study on the application of lightweight aggregate concrete in lining channels of Hetao irrigation districtXiangdong Shen, Chu GaoInner Mongolia Agricultural University, China
15:00-15:15 Tea Break
Location: Room 303B, the 3rd Floor of CNCCChairs: Prof. Claudio García, Instituto Nacional de Investigación Agropecuaria (INIA), Uruguay Prof. Zhongyi Qu, Inner Mongolia Agricultural University, China
Time Paper # Technical Presentations
13:30-13:45 2014-0737
Sprinkler package modification for a center pivot irrigation system in an alfalfa fieldYongchong Li, Haijun Yan, Maona Li, Chengbo Xu, Zhiqiang WangChina Agricultural University, China
13:45-14:00 2014-0161
The role of dew as a moisture source for sand in a typical semiarid sand-meadow area of Horqin sandy landTianshuai Wang, Tingxi Liu, Limin Duan, YaoWuInner Mongolia Agricultural University, China
14:00-14:15 0618-060
Research on transformation laws and calibration method of soil water in tomato roots soil layerJun ZhangInstitute of Soil and Water Conservation, Chinese Academy of Sciences & Ministry of Water Resources, China
14:15-14:30 2014-0924
Grassland steppe evapotranspiration and groundwater contribution in Horqin, Inner MongoliaYao Wu, Tingxi LiuInner Mongolia Agricultural University, China
34
14:30-14:45 0618-014
Behaviors of elemental sulfur and pyrite as electron donors for denitrification in nitrate-contaminated groundwater remediationJiaoyang PuChina University of Geosciences, China
14:45-15:00 2014-1463
Emitter clogging sensibility with increasing biofilm components under reclaimed water drip irrigationBo Zhou, Yunkai Li, Peng Song, Ji Feng, Yinguang JiangChina Agricultural University, China
35
Time Paper # Technical Presentations
08:30-08:50 0826-101
Enhancing water use efficiency with plant feedback irrigation control: the case for sorghumDr. Steven R. EvettUSDA-ARS, USA
08:50-09:10 0826-114Indexes of irrigation schedule decision-making and precision controlDr. CaiJiabinChina Institute of Water Resources and Hydropower Research
09:10-09:30 0826-103Potential water conservation using site-specific irrigationDr. Kenneth C. StoneUSDA-ARS
09:30-09:50 0826-116Real time control technology for precision surface irrigation Dr. Bai MeijianChina Institute of Water Resources and Hydropower Research
09:50-10:10 0826-104Soil moisture monitoring using wireless sensor networkDr. Ruixiu SuiUSDA-ARS, USA
SPECIAL SESSION
CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP
PROJECT WORKSHOP
18TH WORLD CONGRESS of CIGR
ORAL PRESENTATIONS
SEPTEMBER 17, 2014
WEDNSDAY MORNING
08:30-12:00
Location: Room 305, the 3rd Floor of CNCCChair: Dr. Jiming Jin, Northwest A&F University
10:10-10:20 Tea Break
36
Time Paper # Technical Presentations
10:20-10:40 0826-113Prediction of crop water requirement based on remote sensingDr. Zhang ZhitaoNorthwest A&F University
10:40-11:00 0826-115
Cloud Intelligent Cotton Drip Irrigation Management and Benefit Analysis – A Case Study on AksuDr. Yu YinduoChina Institute of Water Resources and Hydropower Research
11:00-11:20 2014-1240Advancing irrigation efficiencyin the arid southwest USADr. Kevin F. BronsonUSDA-ARS
11:20-11:40 0826-107Micro irrigation Development in ChinaDr. Li GuangyongChina Agricultural University
11:40-12:00 0826-105
ARS water productivity research in the U.S. Central Plains: Measuringcrop response to water stressDr. Thomas J. TroutUSDA-ARS
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
14:00-17:00
Location: Room 305, the 3rd Floor of CNCCChair: Dr. Ruixiu Sui, USDA-ARS
Time Paper # Technical Presentations
14:00-14:20 0826-117R&D of irrigation equipment in Jiangsu UniversityDr. Li HongJiangsu University
14:20-14:40 0826-109Development and application of center pivot irrigation system in ChinaDr. Yan HaijunChina Agricultural University
14:40-15:00 0826-111Assessing whole-field sprinkler irrigation application uniformityDr. Zhang LinNorthwest A&F University
37
Time Paper # Technical Presentations
15:20-15:40 0826-106Impact of Soil Variability on Irrigated Cotton Yield Dr. Earl D. VoriesUSDA-ARS
15:40-16:00 0826-102
Water Management Impacts on Measured Turbulent Fluxes of Heat, Water Carbon and Methane of Mid-South US RiceDr. Michele L. RebaUSDA-ARS
16:00-16:20 0826-112
Monitoring and modeling of crop habitat process under different mulching modes: challenge and opportunity Dr. Zhao YingNorthwest A&F University
16:20-16:40 0826-108
Drip Irrigation Scheduling for Potato in North China Plain and Northwest China. Dr. Wang FengxinChina Agricultural University
16:40-17:00 0826-110
Numerical simulations of the impact of irrigation on arid climate over northwestern ChinaDr. JimingJinNorthwest A&F University
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-12:00
Location: Room 305, the 3rd Floor of CNCCChairs: Dr. Ruixiu Sui, USDA-ARS, USA Dr. Wenting Han, Northwest A&F University, China08:30-12:00 Discussion on Flagship Project
15:00-15:20 Tea Break
38
SESSION I
POSTER SESSIONS
SEPTEMBER 16, TUESDAY
13:30 - 17:00
Topic (1) Drought Management
No. Poster # Paper # Paper Titles Institution Country
1 11-001 0526-026 Research of Reference Crop Evapotranspiration
Kang YinhongSichuan Agricultural
UniversityChina
2 11-002 2014-0624
Impacts of Climate and Landuse/cover Change on Streamflow
Using SWAT combined Separating Method for Xiying River Basin in
Northwestern China
Guo JingNorthwest
Agriculture & Forestry University
China
No. Poster # Paper # Paper Titles Institution Country
3 12-001 0618-039
Structure of Mechanized Cultivation Technology of Seedling-growing
Bowl Tray Made of Paddy-straw and Its Effects on Rice Yield
Li LianhaoChina Agricultural
UniversityChina
4 12-002 2014-0159Analyzing Climate Change Impacts
on Rainfed Maize Water Productivity in The Murray Darling Basin, Australia
Kang YinhongSichuan Agricultural
UniversityChina
5 12-003 2014-0280
Performance Evaluation of AquaCrop Model for Plastic Film Mulching on
Rain-fed Maize in The Semi-arid Region of China Northeast
Yang NingLiaoning provincial
academy of agricultural sciences
China
6 12-004 2014-0346Effects of Different Subsoiling
Tillage on Water use Efficiency and Grain Yield of Maize
Liu Zhandong,Chinese Academy of Agricultural Sciences
China
7 12-005 2014-0556
Effects of Different Nitrogen Rates, Irrigation Volumes, and Application
of Humic Acid on The Yield and Nitrate Leaching in Eggplant Fields:
A Lysimeter Study
Dong YiweiChinese Academy
of Agricultural Sciences
China
8 12-006 2014-0674Study on Water Consumption
and Forecast Model of Fraxinus Chinensis
Li PingfengBeijing agricultural
information technology research
center
China
Topic (2) Water-saving Vs. Farmer Revenues
39
No. Poster # Paper # Paper Titles Institution Country
13 13-001 0618-027Sensitivity Analysis of
Reservoir Irrigation Benefit in the Context of Climate Change
Ma FangkaiDepartment of Planning, Changjiang Institute of
Survey, Planning, Design and Research,
China
14 13-002 0618-100
Design and Experiment of Automatic Decision System
for Nutrient Solution Irrigation in Substrate Culture Based on
Negative Pressure
Zhang FangXi an University of
TechnologyChina
15 13-003 2014-0091
Irrigation Scheduling of Cotton with Drip Irrigation under Film Mulching Based
on Pan Evaporation
Shen XiaojunKey Laboratory of Crop
Water Use and Regulation, Ministry of Agriculture,
Farmland Irrigation Research Institute, Chinese Academy
of Agricultural Sciences
China
16 13-004 2014-0500
Layout Pattern and Planning on Integrated Irrigation and Drainage System in Huang-
Huai-Hai Plain Region
Shi XueshuangChina Agricultural University China
17 13-005 2014-0908
Integrated Technologies for Improvement of Irrigation
Systems in Mountainous and Hilly Areas
Chen JianCollege of Engineering
and Technology, Southwest University
China
18 13-006 2014-0922
Abrasion wear resistance of co2 gas shielded spraying
powder composite surfacing subsoiling plow shovel
Jiao RenbaoSchool of Mechanical Engineering, JiaMusi
University
China
Topic (3) Modernization of Irrigation Systems
10 12-008 '2014-0938
Estimation of pipe losses in drip irrigation system and its control
measurements through redesigning in Pakistan
Qaiser JavedInstitute of
Agricultural Engineering, Jiangsu
University
China
11 12-009 2014-1317Assessing and optimizing field
irrigation performance for seed corn field in the middle Heihe River basin
Jiang Yao Center for Agricultural
Water Research, China Agricultural
University
China
12 12-010 2014-1410
Assessing the impacts of groundwater table changes on soil
salinity and maize yield under groundwater irrigation in the upper
Yellow river basin, China
Hao YuanyuanChinese-Israeli
International Center for Research and Training
in Agriculture, China Agricultural
University
China
40
19 13-007 2014-1163
Cistern Siting Based on GIS and Estimation of Crop Irrigation Requirement in a Hilly Watershed in China
Liu WeipingKey Laboratory of Eco-
environments in Three Gorges Cistern Region, Ministry of Education, College of
Resources and Environment, Southwest University
China
20 13-008 2014-1245 Irrigation System Based on the Principle of Penetration
Zhan linhaiCollege of Engineer,China
Agricultural UniversityChina
21 13-009 2014-1335Research on Fine Roots
Distribution of Apple Trees in Water Storage Pit Irrigation
Guo XianghongCollege of water resource
science and engineering, Taiyuan University of Technology
China
22 13-010 2014-1343
Applicability of different infiltration models to
infiltration characteristics of soil water under negative
hydraulic head
Shang GuanyuyiGraduate School of Chinese
Academy of Agricultural Science
China
23 13-011 2014-1364
Experiment Investigation and Numerical Simulation of Head-discharge Relationship for Arch Sharp-crested Weir
Ma QinbiaoCollege of Water
Conservancy and Civil Engineer, China Agricultural
University
China
24 13-012 2014-1373
Distributed simulation of soil water dynamics and crop water productivity in Hetao
Irrigation District
Yin RuixueCenter for Agricultural Water Research, China Agricultural
University
China
25 13-013 2014-1439
The Effects of Ice Cover on Water and Salts Movement in Unsaturated Frozen Soil : Experiments and Simulation
Tan XiaoState Key Laboratory
of Water Resources and Hydropower Engineering
Science, Wuhan University
China
No. Poster # Paper # Paper Titles Institution Country
26 14-001 0618-022
Adsorption of ammonia nitrogen onto ceramic
composite materials based on lake sediment from aqueous
solution
Yu YangSchool of Water Resources
and Environment, China University of Geosciences
China
27 14-002 2014-0511
Effects of Saline Water Drip Irrigation on The Soil Water Distribution and Processing
Tomato Growth in Hetao Irrigation District
Liu YuCollege of Water Resources
and Civil Engineering, China Agricultural University
China
Topic (4) Salinity Assessment and Control
41
28 14-003 2014-0512
Biomass Production and Nutrients Removal by
Spirulina Platensis FACHB - 439 in Beer Wastewater
Wu XiaodanEngineering Research Center
of Biomass Conversion, Ministry of Education, Nanchang University
China
29 14-004 2014-0554
Comparing Performance of ADE and MIM Based
Models for Simulating Solute Transport in Heterogeneous
Soils
Mao XiaominCollege of Water Resources
and Civil Engineering, Center for Agricultural Water
Research in China, China Agricultural University
China
30 14-005 2014-0627
Evaluation of Regulated Deficit Irrigation Performance
of Saline Water Based on Principal Component Analyses
He XinChina Agricultural University China
31 14-006 2014-0629
The Impact of Reclaimed Water Drip Irrigation in
Summer Maize with Different Nitrogen Fertilizer Application
on CO2 and N2O Emissions
Gao DaweiChina Agricultural University China
32 14-007 2014-0812
Research on the hydrochemistry characteristics and evolution of groundwater in the upper, middle and lower
reaches of Inner Mongolia Hetao irrigation district
Li BinThe College of Water
Conservancy and Civil Engineering,Inner Mongolia
Agriculture University
China
33 14-008 2014-0887
Comparative study of canal water and filtered chlorinated
canal water to evaluate the efficiency of water treatment
system in Millat town Faisalabad, Pakistan
Ahmad AzeemInstitute of Agricultural
Engineering, Jiangsu University
China
34 14-009 2014-1299Comparison of Heavy Metal
Pollution Loads from Different Land Uses in Binzhou
Liu GangCollege of Information and
Electrical Engineering, China Agricultural University
China
35 14-010 2014-1581The Effect Of Salinity On Soil Evaporation: Experiments and
Simulation
Zhang ShaowenState Key Laboratory
of Water Resources and Hydropower Engineering
Science, Wuhan University
China
No. Poster # Paper # Paper Titles Institution Country
36 15-001 2014-0139 Effects of Sub-soiling on Corn Yield and Soil Physical Quality
Li XiaShihezi University China
37 15-002 2014-0364 Fractal Behavior of Tillage Soil Surface Roughness
Hou ZhanfengInner Mongolia Agricultural
UniversityChina
Topic (5) Irrigation and Soil Monitoring: Practices and Equipment
42
No. Poster # Paper # Paper Titles Institution Country
41 16-001 2014-0745Effects of the Bionic Ring
Structure on Drill Pipe Surface Anti-corrosion
Wang hubiaoKey Laboratory of Bionic Engineering (Ministry of
Education),Jilin University
China
42 16-002 2014-0981
Comparing Mathematic Models for Chemical Transfer from Soil to Surface Runoff
with Rainfall Impact
Yang TingInstitute of Water Resources
and Hydro-electric Engineering, Xi’an University
of Technology
China
43 16-003 2014-0999Research of Calculation
Methods of Fractal Dimension on Soft Terrain Surface
Jiang ChunxiaCollege of Engineering,
Nanjing Agricultural University
China
No. Poster # Paper # Paper Title Institution Country
44 17-001 2014-1637
Variation of Vegetation NDVI and its Responses to Climate
Change in the Contiguous Region of Shanxi, Shaanxi and Inner Mongolia During Recent
15 Years
Ning TingtingState Key Laboratory of
Soil Erosion and Dryland Farming on the Loess
Plateau, Institute of Soil and Water Conservation, Chinese
Academy of Sciences and Ministry of Water Resources
China
Topic (6) Soil Conservation and Improvement
Topic (7) Landscape Protection and Preservation
38 15-003 2014-0411
Study on the Ecological Planning of Basic Farmland Protect in Tropical Platform
Area: A Case Study in Tunchang County, Hainan
Province
Tang XiumeiBeijing Academy of
Agriculture and Forestry Sciences
China
39 15-004 2014-0596
Anisotropy of Soil Gas Transport Properties of
Disturbed and Compacted Japanese Andisol as Affected
by Water Content and Level of Compaction
Purwoko Hari KuncoroDepartment of Agricultural and
Environmental Engineering, The United Graduate School
of Agricultural Sciences, Iwate University, Morioka,
Japan
Indonesia
40 15-005 2014-0743Experimental Study on
Infiltrability of Layered Soil with Point Source Infiltrometer
Hu YaqiCollege of Water Resources & Civil Engineering, China
Agricultural University
China
43
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION II
FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT
44
Monday, Sept. 15 08:00-20:00Registration
Location:the open place on the 1st floor near the Delegates AccessGate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 1. Keynote Speeches Location: 307A+B,CNCC
15:00-15:15 Tea Break
15:15-16:45 1. Keynote Speeches Location: 307A+B,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical Oral Presentation
2. Livestock Environment Control
Location: 307A,CNCC
3. Livestock Waste Treatment Location: 307B,CNCC
10:00-10:15 Tea Break
10:15-12:15 Technical Oral Presentation
2. Livestock Environment Control
Location: 307A,CNCC
3. Livestock Waste Treatment Location: 307B,CNCC
12:15-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
4. Livestock Environment Control
Location: 307A,CNCC
6. Livestock Waste Treatment Location: 307B,CNCC
15:00-15:15 Tea Break
15:15-17:35 Technical Oral Presentation
5. Precision Livestock Farming
Location: 307A,CNCC
6. Livestock Waste Treatment Location: 307B,CNCC
19:30-21:30 Chinese Cultural Night Location: Beijing Performance & Arts Centre
Overview of Session II: Farm Buildings, Equipment, Structures and Environment
45
Thursday, Sept. 18
08:30-10:00 Technical Oral Presentation
7. Greenhouse Environment and Equipment
Location: 307A,CNCC
8. Livestock Structures &Equipment & Animal Welfare
Location: 307B,CNCC
10:00-10:15 Tea Break
10:15-12:15 Technical Oral Presentation
7. Greenhouse Environment and Equipment
Location: 307A,CNCC
8. Livestock Structures &Equipment & Animal Welfare
Location: 307B,CNCC
12:15-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
9. Greenhouse Environment and Equipment
Location: 307A,CNCC
10. Aquaculture Farming Location: 307B,CNCC
15:00-15:15 Tea Break
15:15-15:30 Technical Oral Presentation
9. Greenhouse Environment and Equipment
Location: 307A,CNCC
10. Aquaculture Farming Location: 307B,CNCC
16:00-17:00 Closing Ceremony Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
46
OPENING CEREMONY OF SESSION Ⅱ
FARM BUILDINGS, EQUIPMENT, STRUCTURES AND
ENVIRONMENT
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-16:45
1. Keynote Speeches
Location: Room 307A-307B, the 3rd floor of CNCCChair: Prof. Guoqing Zhang, Aarhus University, Denmark
15:00-15:15 Tea Break
Location: Room 307A-307B, the 3rd floor of CNCCChair: Prof. Baoming Li,
Time Paper # Technical Presentations
13:30-14:00 0826-201
The development and results of the Patio housing system for broilers - animal health, welfare and environmental impactProf. Peter Groot KoerkampProfessor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands
14:00-14:30 0826-202The introduction of animal welfare in ChinaProf. Jun BaoPresident of Northeast Agricultural University, China
14:30-15:00 2014-1597
Precision Livestock Farming technologies: basic principles and examplesProf. Daniel BerckmansProfessor of Department of Biosystems, Faculty of Bioscience Engineering at KU Leuven, Belgium
Deputy-dean of College of Water Resources and Civil Engineering, China Agricultural University, China
47
Time Paper # Technical Presentations
15:15-15:45 0826-203
Trends in CFD application in agricultureProf. In-Bok LeeProfessor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea
15:45-16:15 0826-204
Energy-saving techniques in Chinese solar greenhouseProf. Qichang YangChief Scientist and Director of the Research Center for Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China
16:15-16:45 0826-205
New biofiltration technologies applied in recirculating aquaculturalsystemsProf. Songming ZhuProfessor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China
Time Paper # Technical Presentations
08:30-09:00 2014-0486
The influence of diurnal variation in animal activity and digestion on animal heat productionProf. Søren PedersenAarhus University, Denmark
09:00-09:20 2014-0196
Development of a reference test installation for the validation of naturally ventilated airflow rate measurement techniquesPhilippe Van OverbekeInstitute for Agricultural and Fisheries Research, Belgium
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:15
2. Livestock Environment Control
Location: Room 307A, the 3rd floor of CNCCChair: Prof. Daniel Berckmans, Professor of Department of Biosystems, Faculty of
Bioscience Engineering at KU LeuvenKU Leuven, Belgium
48
10:00-10:15 Tea Break
Location: Room 307A, the 3rd floor of CNCCChair: Prof. Jun Bao,
09:20-09:40 2014-1247
Effect of pigment intensity and region of eggshell on the spectral transmission of visible light that passed the eggshell and the element change during the incubationYue YuZhejiang University, China
09:40-10:00 0508-005Water use at Texas High Plains dairiesKen CaseyTexas A&M University, USA
Time Paper # Technical Presentations
10:15-10:35 2014-1586
Automating CFD to calculate ventilation rate of a naturally ventilated buildingSe-Woon HongKU Leuven, Belgium
10:35-10:55 0523-010
Development of web-based forecasting system of airborne livestock virus spread using Open FOAM CFD technologyTae-hwan HaSeoul National University, Korea
10:55-11:15 0523-012
Statistical analysis of aerial dust in a mechanically ventilated pig house considering worker’s respiratoryYeseul JoSeoul National University, Korea
11:15-11:35 2014-0948
Environmental decontamination with slightly acidic electrolyzed water for reducing pathogens in layer housesLi NiChina Agricultural University, China
11:35-11:55 2014-1589
A study of computational fluid dynamics simulation airflow, temperature and humidity in weaner house in Southern ChinaQiaona PanZhejiang University, China
11:55-12:15 2014-0753
Influence of spraying time on cooling effect of sprinkler system in dairy barnsZhihui YanChina Agricultural University, China
Deputy Party Secretary and President of Heilongjiang Bayi Agricultural University, China
49
10:00-10:15 Tea Break
Location: Room 307B, the 3rd floor of CNCCChair: Dr. Jiqin Ni, Purdue University, USA
3. Livestock Waste Treatment
Location: Room 307B, the 3rd floor of CNCCChair: Dr. Joseph Zulovich, University of Missouri, USA
Time Paper # Technical Presentations
10:15-10:35 2014-1533
How to reduce various environmental impacts from animal manure by more than 50% - Results of a design and evaluation study on strategies for integrated manure managementPeter Groot KoerkampWageningen University, the Netherlands
10:35-10:55 0512-002
VOC and H2S emissions from full-scale land spreading of manure slurry investigated by dynamic chambersTavs NyordAarhus University, Denmark
10:55-11:15 2014-1389
Optimization of coagulation-flocculation process for biogas slurry pretreatment using response surface methodologyLei WangZhejiang University, China
11:15-11:35 2014-1380
Modelling of a chemical air scrubber for the removal of gaseous emissions from pig housing facilitiesCaroline Van der HeydenGhent University, Belgium
Time Paper # Technical Presentations
08:30-09:00 2014-1037Case studies: dry composting pig and poultry mortalities Prof. Thomas BanhaziUniversity of Southern Queensland, Australia
09:00-09:20 0508-011
Production of nitrogen fertilizer using acid wet scrubbers at animal facilitiesLingying ZhaoOhio State University, USA
09:20-09:40 2014-0134Biofiltration for treatment of exhaust air at animal houses Roland W. MelseWageningen University, the Netherlands
09:40-10:00 2014-0177
Computational fluid dynamics investigation of particle collection by vegetative barriersLi GuoJilin University, China
50
11:35-11:55 2014-0740
Carbon balance of valorization of livestock waste through biohythane coupled with algae technologyJiaming LiChina Agricultural University, China
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-17:35
4. Livestock Environment Control
Location: Room 307A,the 3rd floor of CNCCChair: Prof. Søren Pedersen, Aarhus University, Denmark
Time Paper # Technical Presentations
13:30-13:50 2014-1615Effect of roofing material type on microclimate in the buildings of sheepHatemCairo University, Egypt
13:50-14:10 2014-0367
Influencing factors of dust removal efficiency by electrostatic spray and the correlation analysisYu RuNanjing Forestry University, China
14:10-14:30 2014-0195Point extraction system for partial air cleaning in finishing pig housesAnders Leegaard RiisPig Research Centre, Danish Agriculture &Food Council, Denmark
14:30-14:50 2014-1173
Slightly acidic electrolyzed water treatment for disinfection on the surface of tire inoculated with Escherichia coli O157:H7 and Salmonella enteritidisYitian ZangChina Agricultural University, China
15:00-15:15 Tea Break
5. Precision Livestock Farming
Location: Room 307A, the 3rd floor of CNCCChair: Prof. Matteo Barbari, Professor of Agricultural, Food and ForestrySystems, University
of Florence, Italy
51
Time Paper # Technical Presentations
13:30-14:00 2014-0137
Ammonia emissions from naturally ventilated dairy cattle buildings – a review of field measurements in European countries Prof. Guoqiang ZhangAarhus University, Denmark
14:00-14:20 0618-066
Potential NH3 and CH4 emissions from pig slurries produced in commercial and experimental sites Salvador CalvetUniversitat Politecnica de Valencia, Spain
6. Livestock Waste Treatment
Location: Room 307B, the 3rd floor of CNCCChair: Dr. Lingying Zhao,
Time Paper # Technical Presentations
15:15-15:35 0506-010
Image-based precision livestock farming tool supporting the analysis of broiler chicken activity and welfareDaniel BerckmansKU Leuven, Belgium
15:35-15:55 2014-1595
Practical implementation of an automatic 3D vision system for dairy cow locomotion monitoringDaniel BerckmansKU Leuven, Belgium
15:55-16:15 2014-1593Automatic weight estimation of individual pigs using image analysisDaniel BerckmansKU Leuven, Belgium
16:15-16:35 2014-1629Dairy cow body condition scoring in automatic milking systems by 3D visionXiangyu SongLely Industries N.V., the Netherlands
16:35-16:55 0618-069
Development of an automatic animal dimension detection system based on stereo visionZhuo LiChina Agricultural University, China
17:15-17:35 2014-0132Accurate discrimination of individual dairy cattle using video analysisKaixuan ZhaoNorthwest A&F University, China
Professor of Department of Food, Agricultural and Biological Engineering, Ohio State University, USA
52
14:20-14:40 0519-011
Impact of alternative air exhaustion in housing for poultry on concentration of harmful gases in the air Stefan MihinaSlovak University of Agriculture in Nitra, Slovakia
14:40-15:00 2014-0121
Assessment of different technical solutions to reduce the fossil fuel consumption of agricultural buildings and machinery on the farm to limit direct CO2 emissions Mélynda HassounaINRA, France
15:00-15:15 Tea Break
Location: Room 307B, the 3rd floor of CNCCChair: Dr. Teng Teeh Lim, University of Missouri, USA
Time Paper # Technical Presentations
15:15-15:35 2014-0289
Aerial pollutant emissions from two manure-belt layer hen houses with two-year continuous monitoring Jiqin NiPurdue University, USA
15:35-15:55 2014-0742
Assessment of breath methane measurement with an artificial reference cow in the lab Liansun WuWageningen University, the Netherlands
15:55-16:15 2014-0724
Odor emissions from a dairy cow building in Denmark facilitated with a hybrid ventilation systemDezhao LiuAarhus University, Denmark
16:15-16:35 2014-1000
Using the chamber technique to quantify greenhouse gas emission from the open yard and manure storage of a dairy farm in China Luyu DingChina Agricultural University, China
16:35-16:55 2014-0920
Measurement method for urine puddle depth in dairy cow houses as input variable for ammonia emission modelling Johannes Wilhelmus SnoekWageningen University, the Netherlands
16:55-17:15 0618-067
Greenhouse gas emissions from dairy houses - measurements in naturally ventilated buildingsAlexander SchmithausenBonn University, Germany
53
10:00-10:15 Tea Break
Location: Room 307A, the 3rd floor of CNCCChair: Prof. Gerard P.A. Bot, Professor of Wageningen University, The Netherlands
Time Paper # Technical Presentations
08:30-09:00 0826-206
Status of the speaking plant approach in greenhouse environmental conditioning Prof. Gerard P. A. BotWageningen University, the Netherlands
09:00-09:20 2014-0896
Measured energy use in a greenhouse with tomatoes compared to predicted use by a mechanistic model including transpirationSven NimmermarkSwedish University of Agricultural Sciences, Sweden
09:20-09:40 0618-090
PAR transmittances of condensate covered solar greenhouse covering materials Nan WangChina Agricultural University, China
09:40-10:00 2014-1089Thermal performance of solar-greenhouse with a new type composite wallMing LiChinese Academy of Agricultural Engineering, China
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-12:15
7. Greenhouse Environment and Equipment
Location: Room 307A, the 3rd floor of CNCCChair: Prof. Qichang Yang, Chief Scientist and Director of the Research Center for
Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China
54
Time Paper # Technical Presentations
10:15-10:35 2014-1500The light environment in the greenhouse: a reviewDake WuXinan University, China
10:35-10:55 2014-1636
Study on the law of flooding and releasing heat of solar heat pipe filled with phase change materials (PCMs) in greenhouseYong WuChina Agricultural University, China
10:55-11:15 2014-0703
Effect of acoustic frequency technology on the growth of strawberry in solar greenhouseReda EmamChina Agricultural University, China
11:15-11:35 2014-0702Response of cucumber seedlings to audible sound wavesReda EmamChina Agricultural University, China
11:35-11:55 0618-062
Effects of daily fertigation on soil properties and cucumber yield in Chinese solar greenhouseMin WeiShandong Agricultural University, China
8. Livestock Structures; Equipment; Animal Welfare
Location: Room 307B, the 3rd floor of CNCCChair: Prof. Thomas Banhazi, University of Southern Queensland, Australia
Time Paper # Technical Presentations
08:30-08:50 2014-0967Devices to provide post-weaning pigs with wood as manipulable materialMatteo BarbariUniversity of Florence, Italy
08:50-09:10 2014-0644Start-up of a pilot scale anaerobic digestion system for swine finishing barnTeng Teeh LimUniversity of Missouri, USA
09:10-09:30 2014-0148CFD model of regenerative heat exchangerPavel KicCzech University of Life Sciences Prague, Czech
09:30-09:50 2014-0150Mathematical model for optimal arrangement of milking parlor Pavel KicCzech University of Life Sciences Prague, Czech
10:00-10:15 Tea Break
55
Location: Room 307B, the 3rd floor of CNCCChair: Prof. Peter Groot Koerkamp,
Time Paper # Technical Presentations
10:15-10:35 0523-014Strategic path of development for live pig healthy aquaculture in ChinaQing LiuChina Agricultural University, China
10:35-10:55 2014-0169Compost barns for dairy cows - design criteria and animal welfareOfner - Schroeck ElfriedeLFZ Raumberg - Gumpenstein, Austria
10:55-11:15 2014-1607
Classification of potential sheep heat-stress levels according to the prevailing meteorological conditionsDimitris K. PapanastasiouCenter for Research and Technology – Hellas, Greece
11:15-11:35 2014-0371
Nonlinear finite element static analysis and experiment of laying breeder hens cage floorTengfei LiChina Agricultural University, China
11:35-11:55 0512-001
Improvement of the Multipath Routing Algorithm and its application in the nursing pigstyChanghua MaJiangsu University, China
11:55-12:15 0506-004Mean lameness over herds by meta analysisAhmet Erhan KarahanEge University, Turkey
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-15:30
9. Greenhouse Environment and Equipment
Location: Room 307A, the 3rd floor of CNCCChair: Prof. In-bok Lee,
Professor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands
Professor of Laboratory of Aero-Environmental &Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea
56
Time Paper # Technical Presentations
13:30-13:50 0523-011
Evaluation of wind pressure coefficient on the greenhouse built in reclaimed land using computational fluid Uk-hyeon YeoSeoul National University, Korea
13:50-14:10 2014-1516
The comprehensive performance of north wall in Chinese greenhouse evaluation model and application based on weighted entropy methodXin ZhangNorthwest A&F University, China
14:10-14:30 0509-019
CFD study on overall and local ventilation rates of greenhouses built in reclaimed land considering thermal condition Tae-hwan HaSeoul National University, Korea
14:30-14:50 0514-003 A novel solar sea water desalination film used in ocean agriculture Hongfei ZhengBeijing Institute of Technology, China
14:50-15:10 0618-025
Strengthening electrochemical reduction of nitrate using methanol and salicylic acidLijun YaoChina University of Geosciences, China
15:10-15:30 0618-091
Tomato fruit firmness and colour change in response to greenhouse microclimate, cultivar and storage conditionsEllen Letsogile ThipeBotswana College of Agriculture, Botswana
10. Aquaculture Farming
Location: Room 307B, the 3rd floor of CNCCChairs: Prof. Songming Zhu,
Prof. Ying Liu, Institute of Oceanology, Chinese Academy of Sciences, China.
Time Paper # Technical Presentations
13:30-13:50 2014-0344
Effects of light environment factors on the gonadal maturation of Atlantic salmon (Salmo salar) in recirculating aquaculture systems (RAS)Denggao QiuChinese Academy of Sciences, China
Professor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China
57
13:50-14:10 2014-1149
Study on the appropriate ratio of oyster and gracilaria in the progress of managing waste water from Atlantic salmon aquaculture in RASYing LiChinese Academy of Sciences, China
14:10-14:30 0509-044
N removal bacteria analysis in bio-filter different sections of full-scale marine recirculating aquaculture systemYunjie RuanZhejiang University, China
14:30-14:50 2014-1417
The bioturbation study of perinereis aibuhitensis on the organic matter nitrogen and phosphorus release in the sedimentDazuo YangDalian Ocean University, China
14:50-15:10 2014-1420
Primary analysis of the organic-matter and energy budget in the closed-recirculating aquaculture system of perinereis aibuhitensisDazuo YangDalian Ocean University, China
58
SESSION II
POSTER SESSIONS
SEPTEMBER 16, TUESDAY
13:30 - 17:00
Topic (1) Livestock Environment Control & Livestock Waste Treatment
No. Poster # Paper # Paper Titles Institution Country
45 21-001 0618-077Turbulent flow around a rib: numerical vs. wind tunnel
experiments
GerasimosMartzopoulosDepartment of Hydraulics,
Soil Sciences and Agricultural Engineering, Aristotle
University of Thessaloniki
Greece
46 21-002 2014-0166Effect of Roof Cladding on
Quality of Indoor Environment of Stalls
Pogran StefanSlovak University of Agriculture in Nitra
Slovakia
47 21-003 2014-0168Performance of Geotextile-
gravel Bed All-weather Surface for Cattle and Horses
Hans von WachenfeltSwedish University of Agricultural Sciences
Sweden
48 21-004 2014-0248 Passive Systems to Control Microclimate Inside Buildings
Evelia SchettiniUniversity of Bari Italy
49 21-005 2014-0284
Temporal and Seasonal Change of NH3 Concentration: Case Study in An Agricultural,
Forest and Urban Site
Stéphane GodboutIRDA Canada
50 21-006 2014-0553 Composting Villages’ Layer Manure with C50 Bioreactor
Zhao MingjieMAE Wellful Industries Co.,
Ltd., Beijing, ChinaChina
51 21-007 2014-0583
A Study on Airflow, Temperature and Humidity Simulation Base on CFD of
Weaner house in Southern China
Pang QiaonaThe College of biosystems
engineering and Food Science of Zhejiang University
China
52 21-008 2014-0801Removal Efficiencies in Full-scale Biofilters Cleaning Pig
House Exhaust Air
Rune AndreasenPig Research Centre, Danish Agriculture & Food Council
Denmark
53 21-009 2014-0857
Effects of a Water-cooled Cover on Farrowing Sows
under Hot and Humid Climates
Pang ZhenzhenDepartment of Protected Agriculture Science and
engineering, Hainan University
China
59
Topic (2) Greenhouse Structure & Environment & Equipment
No. Poster # Paper # Paper Titles Institution Country
57 22-001 0508-019Application of Case for Closed
Cultivation System of Solar Greenhouse in China
Yuan HongboKey Laboratory on Modern
Precision Agriculture System Integration Research of
Ministry of Education, China Agricultural University
China
58 22-002 0509-008
The Optimum Design of the Air-conditioning System of a Plant Factory with High-efficient Water Use and the
Effect of its Higher Humidity Condition on Growth in Plants
Seiji MATSUODepartment of System Innovation, school of
Engineering, The University of Tokyo
Japan
59 22-003 0519-017Effect of CO2 Enrichment and Nutrient on Growth of Tomato
in Solar Greenhouse
Wang HongyuCollege of Water
Conservancy and Civil Engineering, China
Agricultural University
China
60 22-004 0519-018
Effect of CO2 Enrichments under Different Water
Conditions on Growth and Photosynthetic Characteristics
of Tomato Plants in Heliogreenhouse
Zhou ShiliCollege of Water Resources & Civil Engineering, China
Agricultural University
China
61 22-005 0526-021
Estimating Optimum Design of Photo-bioreactor for Cultivating Microalgae
using Computational Fluid Dynamics
Uk-hyeon YeoDepartment of Rural Systems
Engineering, Research Institute for Agriculture and
Life Science, College of Agriculture and Life Sciences,
Seoul National University
Korea
62 22-006 2014-0063
Research and Development of Greenhouse Automatic Transfer Device for Spray
Plant Protection Equipment
Zhuo JieqiangBeijing Agricultural
Machinery Institute, Beijing, China
China
54 21-010 2014-0875
Research on the Action Mechanism of Sheep Taking Medicine Shower in Strong
Circulation Spray Fireld
Zhang LichunInner Mongolia Agricultural
University, Hohhot, Inner Mongolia, China
China
55 21-011 2014-1052Odor Reduction from Pig
Housing using Alkaline Air-cleaning
Malene JoergensenPig Research Centre, Danish Agriculture & Food Council
Denmark
56 21-012 2014-0289
Aerial Pollutant Emissions from Two Manure-Belt Layer Hen Houses with Two-Year
Continuous Monitoring
Jiqin NiPurdue University
United States
60
63 22-007 2014-0064
Study on Experimental of Spraying Liquid Medicine of Prevention Plant Disease
Spraying Equipment in Greenhouse
Zhuo JieqiangBeijing Agricultural
Machinery Institute, Beijing, China
China
64 22-008 2014-0065
Study on Experimental Comparison of Energy
Consumption and Dehumidification of
Dehumidifier in Greenhouse
Zhuo JieqiangBeijing Kingpeng
International Hi-Tech Corporation, Beijing, China
China
65 22-009 2014-0736Design and Simulation
Analysis of Greenhouse Heat-exchanging Dehumidifier
Xin MingjinCollege of Engineering, Shenyang Agricultural
University, Shenyang, China
China
66 22-010 2014-1090Application of BP Neural
Network in Predicting Solar Greenhouse Soil Temperature
He FenChinese Academy of
Agricultural EngineeringChina
67 22-011 2014-1091
Feasibility Study for Using Solar Thin-film Cell Module as Glazing Covering Material of Greenhouse South-facing
Roof
Wei XiaomingInstitute of facility
Agriculture, Chinese Academy of Agricultural
Engineering
China
68 22-012 2014-1239Research Advances in
The Natural Ventilation of Greenhouse Based on CFD
Song WeiKey Laboratory of Modern Agricultural Equipment and
Technology, Ministry of Education, Jiangsu University
China
69 22-013 2014-1281
Research on Calculation Method of Geometric
Parameters about the Solar Greenhouse’s Lighting
Surfaces
Bai YikuiCollege of Water
Conservancy, Shenyang Agricultural University
China
70 22-014 2014-1464Simulation of Heat Storage
Capacity of Solar Greenhouse Walls in Different Regions
Cui WenhuiCollege of Water Resource
and Civil Engineering, China Agricultural University
China
71 22-015 2014-1488
Coupling Diurnal Light Distribution and Temperature Variation to Simulate Solar
Greenhouse
Du JianjunBeijing Research Center for Information Technology in
Agriculture, Beijing Academy of Agriculture and Forestry
Sciences
China
72 22-016 2014-1516
The comprehensive performance of north wall in
Chinese greenhouse evaluation model and application based on weighted entropy method
Zhang XinCollege of Horticulture,
Northwest Agriculture and Forestry University
China
73 22-017 2014-1548
Effect of Incident Angle on Radiation Transmittance of Solar Greenhouse Covering
Materials
Wang NanCollege of Water Resource
and Civil Engineering, China Agricultural University
China
61
Topic (3) Livestock Structure & Equipment
Topic (4) Aquaculture Farming
No. Poster # Paper # Paper Titles Institution Country
74 23-001 0519-013
Design of Intelligent Monitoring and Control System in Poultry House
Based on LabVIEW
Benhua ZhangCollege of Engineering, Shenyang Agricultural
University
China
75 23-002 0526-022
Design of Small-scaled Wind Power Generation System
Using Exhaust Flow of Livestock House
Se-woonKU LEUVEN, Kasteelpark
Arenberg 30Korea
76 23-003 0618-075Growing finishing pig weight estimation accuracy analysis
based on LabVIEW
Mao TaotaoCollege of water resources & civil engineering, China
Agricultural University, Beijing, China
China
77 23-004 0618-095The full traceability
management of animals and animal products
Lu ChanghuaInstitute of Veterinary
Medicine, Jiangsu Academy of Agricultural Sciences
China
78 23-005 2014-0053Comparison between Laying
Hen Performance in The Perch System and The Cage System
Cao YanfeiCollege of Water Resources
and Civil Engineering, China Agricultural University
China
79 23-006 2014-0385
Improving Thermal Performance of Earth-to-air Heat Exchanger By Wetting
The Ground: An Experience in Southern Iraq
Morshed WasseemLu Changhua
University of FlorencItaly
80 23-007 2014-0391 Cultivated Pack Barns Improve Longevity of Dairy Cows
Leso LorenzoUniversity of Florence Italy
81 23-008 2014-0445Effects of different feeding
patterns on reproductive hormones in group-housed gilt
Wang ShuhuaShanxi Academy of
Agricultural SciencesChina
82 23-009 2014-1205
The impact of tunnel ventilation on thermal
environment in solar heated swine housing
Yuan YuemingCollege of Engineering, Jilin
Agricultural UniversityChina
No. Poster # Paper # Paper Titles Institution Country
83 24-001 2014-1256
A New Design Concept of using Slightly Acidic Electrolyzed Water for
Disinfection System in RAS
Pei LuoweiKey Laboratory of Equipment
and Informatization in Environment Controlled Agriculture, Ministry of
Agriculture
China
62
84 24-002 2014-1302
Correlation Analysis of pH and Available Chlorine Concentration of Slightly Acidic Electrolyzed Water
under the Condition of Mixture
Qi FanyuKey Laboratory of Equipment
and Informatization in Environment Controlled Agriculture, Ministry of
Agriculture
China
85 24-003 2014-1481Effect of various woods on
structural strength in Korean ginseng cultivation facilities
Yun NamkyuDepartment of Agricultural
Engineering, National Academy of Agricultural
Science
Korea
63
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION III
EQUIPMENT ENGINEERING FOR PLANTS
64
Mon
day,
Sep
t. 15
08:0
0-20
:00
Reg
istra
tion
Loca
tion:
the
open
pla
ce o
n th
e 1st
floo
r nea
r the
Del
egat
es A
cces
sG
ate
C2,
CN
CC
Tues
day,
Sep
t. 16
09:3
0-10
:00
Ope
ning
Cer
emon
y Lo
catio
n:Pl
enar
y H
all B
, CN
CC
10:0
0-10
:10
Tea
Bre
ak
10:1
0-12
:30
Con
gres
s Ple
nary
with
Invi
ted
Spea
kers
Lo
catio
n:Pl
enar
y H
all B
, CN
CC
12:3
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Key
note
Spe
eche
s Lo
catio
n: 3
11A
+B,C
NC
C15
:00-
15:1
5Te
a B
reak
15:1
5-16
:55
Key
note
Spe
eche
s Lo
catio
n: 3
11A
+B,C
NC
C
19:0
0-21
:00
Wel
com
e R
ecep
tion
Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
08:3
0-10
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 2.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
3. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
4. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
5.
Rob
otic
s and
Veh
icle
A
utom
atio
n Lo
catio
n: R
oom
31
1B,C
NC
C
10:0
0-10
:15
Tea
Bre
ak
10:1
5-11
:55
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 6.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
3. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
4. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
5.
Rob
otic
s and
Veh
icle
A
utom
atio
n Lo
catio
n: R
oom
31
1B,C
NC
C
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Ove
rvie
w o
f Se
ssio
n II
I: E
quip
men
t E
ngin
eeri
ng f
or P
lant
s
65
Mon
day,
Sep
t. 15
08:0
0-20
:00
Reg
istra
tion
Loca
tion:
the
open
pla
ce o
n th
e 1st
floo
r nea
r the
Del
egat
es A
cces
sG
ate
C2,
CN
CC
Tues
day,
Sep
t. 16
09:3
0-10
:00
Ope
ning
Cer
emon
y Lo
catio
n:Pl
enar
y H
all B
, CN
CC
10:0
0-10
:10
Tea
Bre
ak
10:1
0-12
:30
Con
gres
s Ple
nary
with
Invi
ted
Spea
kers
Lo
catio
n:Pl
enar
y H
all B
, CN
CC
12:3
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Key
note
Spe
eche
s Lo
catio
n: 3
11A
+B,C
NC
C15
:00-
15:1
5Te
a B
reak
15:1
5-16
:55
Key
note
Spe
eche
s Lo
catio
n: 3
11A
+B,C
NC
C
19:0
0-21
:00
Wel
com
e R
ecep
tion
Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
08:3
0-10
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 2.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
3. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
4. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
5.
Rob
otic
s and
Veh
icle
A
utom
atio
n Lo
catio
n: R
oom
31
1B,C
NC
C
10:0
0-10
:15
Tea
Bre
ak
10:1
5-11
:55
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 6.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
3. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
4. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
5.
Rob
otic
s and
Veh
icle
A
utom
atio
n Lo
catio
n: R
oom
31
1B,C
NC
C
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Wed
nesd
ay,
Sept
. 17
13:3
0-15
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 6.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
7. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
8. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
9.
Spe
ctro
scop
y,
Mac
hine
Vis
ion,
and
B
iose
nsin
g Lo
catio
n: R
oom
31
1B,C
NC
C15
:00-
15:1
5Te
a B
reak
15:1
5-17
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 6.
Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
7. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
8. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
9.
Spe
ctro
scop
y,
Mac
hine
Vis
ion,
and
B
iose
nsin
g Lo
catio
n: R
oom
31
1B,C
NC
C
19:3
0-21
:30
Chi
nese
Cul
tura
l Nig
ht
Loca
tion:
Bei
jing
Perf
orm
ance
& A
rts C
entre
Thur
sday
, Sep
t. 18
8:30
-10:
00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 10
. Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
11. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
12. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
13
. Aut
omat
ion
for
Off-
Roa
d Eq
uipm
ent
Loca
tion:
Roo
m
311B
,CN
CC
10:0
0-10
:15
Tea
Bre
ak
10:1
5-12
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
I 10
. Agr
icul
tura
l Bio
nic
Mec
hani
sm D
esig
n an
d M
anuf
actu
ring;
Tra
ctor
s Lo
catio
n: 3
06A
,CN
CC
Sub-
sess
ion
II
11. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub-
sess
ion
III
12. H
arve
stin
g an
d A
nim
al H
usba
ndry
Te
chno
logy
Lo
catio
n: R
oom
30
6B,C
NC
C
Subs
essi
on IV
13
. Aut
omat
ion
for
Off-
Roa
d Eq
uipm
ent
Loca
tion:
Roo
m
311B
,CN
CC
12:0
0-13
:30
Lunc
h Lo
catio
n:Pl
enar
y H
all A
, CN
CC
13:3
0-15
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
II
14. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Subs
essi
on IV
15
. Pre
cisi
on F
arm
ing
and
Aer
ial A
pplic
atio
ns
Loca
tion:
Roo
m
311B
,CN
CC
15:0
0-15
:15
Tea
Bre
ak
15:1
5-15
:45
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
II
14. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Subs
essi
on IV
15
. Pre
cisi
on F
arm
ing
and
Aer
ial A
pplic
atio
ns
Loca
tion:
Roo
m
311B
,CN
CC
16:0
0-17
:00
Clo
sing
Cer
emon
y Lo
catio
n:30
9A+B
, CN
CC
19:0
0-21
:00
Gal
a D
inne
r Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Frid
ay, S
ept.
1908
:00-
15:0
0Te
chni
cal T
ours
66
Thur
sday
, Sep
t. 18
13:3
0-15
:00
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
II
14. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub
-ses
sion
IV
15. P
reci
sion
Far
min
g an
d A
eria
l App
licat
ions
Lo
catio
n: R
oom
31
1B,C
NC
C
15:0
0-15
:15
Tea
Bre
ak
15:1
5-15
:45
Tech
nica
l O
ral
Pres
enta
tion
Sub-
sess
ion
II
14. R
& D
for F
arm
Mac
hine
ry a
nd E
quip
men
t; Ti
llage
and
Soi
l Pre
para
tion;
Pla
ntin
g, S
eedi
ng,
Ferti
lizin
g, P
lant
Pro
tect
ion
and
Cro
p Q
ualit
y Lo
catio
n: 3
11A
,CN
CC
Sub
-ses
sion
IV
15. P
reci
sion
Far
min
g an
d A
eria
l App
licat
ions
Lo
catio
n: R
oom
31
1B,C
NC
C
16:0
0-17
:00
Clo
sing
Cer
emon
y Lo
catio
n:30
9A+B
, CN
CC
19:0
0-21
:00
Gal
a D
inne
r Lo
catio
n:Pl
enar
y H
all A
, CN
CC
Frid
ay, S
ept.
1908
:00-
15:0
0Te
chni
cal T
ours
67
OPENING CEREMONY OF SESSION III
EQUIPMENT ENGINEERING FOR PLANTS
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-16:55
Time Paper # Technical Presentations
13:40-14:00 0826-301
Integrated solutions to increase the productivity and convenience of agricultural production systemsDr. John F. ReidDirector, Product Technology and Innovation at the Moline Technology Innovation Center (MTIC), John Deere, USA
14:00-14:20 0826-302
Advanced manufacturing technologies for agricultural equipmentProf. John Kenneth SchuellerChair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA
Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. Xiwen Luo,
Open Speeches13:30-13:35 Prof. Xiwen Luo 13:35-13:40 Prof. John Kenneth Schueller
1. Keynote Speeches
Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. Xiwen Luo, Academician, Chinese Academy of Engineering, China
Academician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM), China
Chair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA
68
14:20-14:40 0826-303
Global problems of mechanization of Russian Federation AgricultureProf. Oleg MarchenkoHead of Department of All-Russia Research Institute for Mechanization in Agriculture (VIM), Russia
14:40-15:00 0826-304
Effect of UHMW-PE protuberances' dimensions on sliding resistance and normal adhesion of biomimetic plates in Bangkok clay soilProf. Vilas M SalokheFormer President of the Asian Association for Agricultural Engineering, Profess of Kaziranga University, India
15:00-15:15 Tea Break
Location: Room 311A-311B, the 3rd Floor of CNCCChair: Prof. John Kenneth Schueller, Uiversity of Florida, USA
Time Paper # Technical Presentations
15:15-15:35 0826-305
New technology and new equipment of rice production mechanizationProf. Xiwen LuoAcademician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM) , China
15:35-15:55 0826-306
Automation in crop farming – state-of-the-art and where do we go from here?Prof. Hermann AuernhammerDepartment of Live Science Engineering, Munich University of Technology, Germany
15:55-16:15 0826-307
How does tractor design and infield management influence conservation agriculture and should it cause a rethink of the tractor?Prof. Allen Jack McHughChief sector of technological basis of agri-ecosystem development, State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, University of Southern Queensland, Australia
16:15-16:35 2014-0642Development of laser-guided precision sprayers for tree crop applicationsProf. Heping ZhuLead Scientist in the Application Technology Research Unit (ATRU), USA
16:35-16:55 0526-001
Concept of modern experimental field for agroecological researchProf. Vladislav MininFormer Executive Secretary of the International Association on Mechanization on Field Experiments , Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia
69
15:00-15:15 Tea Break
Location: Room 306A , the 3rd Floor of CNCCModerator: Prof. Julian Vincent, University of Bath, UK
Time Paper # Technical Presentations
10:15-10:35 2014-0244
Useful lessons from nature for improving energy efficiency and sustainable developmentProf. Yuying YanUniversity of Nottingham,UK
10:35-10:55 2014-0458
Biology inspired fiber based materials for water management in plant productionDr. Thomas StegmaierGerman Institute for Textile and Fibre Research Denkendorf, Germany
10:55-11:15 2014-0791
Bionic muscle-research on performance output and preparation of linear driving unit using ionic polymer metal composites (IPMC)Prof. Gang ZhaoHarbin Engineering University, China
Time Paper # Technical Presentations
08:30-09:00 2014-0294Applications of bionics in agricultureProf. Julian VincentUniversity of Bath, UK
09:00-09:30 2014-0037
Design and development of a tractor drawn conservation Tillage bionic ripper planterProf. Timothy SimalengaCentre for Coordination of Agricultural Research and Development in South Africa (CCARDESA)
09:30-10:00 0826-311Tractor EU CertificationProf. Paolo PL PinciroliEuropean Certifying Organization, Italy
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-11:55
Sub-session I2. Agricultural Bionic Mechanism Design and Manufacturing; Tractors
Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Jianqiao Li, Chairman of Terrain-machine System Committee of CSAM, China
70
11:15-11:35 2014-1168
Experiments on the erosion resistance of bionics surface with the characteristics of material coupled with patternDr. Chengchun ZhangJilin University, China
11:35-11:55 2014-0638
Anti-attachment function of slippery zones in nepenthes pitchers and its application in biomimetic developing agricultural pest trappingDr. Lixin WangHebei University of Science and Technology, China
Sub-session II3. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality
Location: Room 311A, the 3rd Floor of CNCCModerator: Mr. Xuejun Yang, Deputy Head, Modern Agricultural Equipment Co.,Ltd., China
Time Paper # Technical Presentations
08:30-08:45 0826-322
Global perspectives on conservation agriculture and the FAO “Save & Grow” conceptProf. Josef KienzleFAO
08:45-09:00 0826-321Conservation agriculture in ChinaProf. Hongwen LiChina Agricultural University, China
09:00-09:15 0826-345Intoduction to IAMFE and Mechanization of Field Experiments in ChinaProf. Shuqi Shang, Qingdao Agricultural University, China
09:15-09:30 2014-1398
Current situation and development proposal of vegetable production mechanization in ChinaDr. Yongsheng ChenNanjing Research Institute for Agriculture Mechanization, China
09:30-09:45 0826-346Alternate row planting with stubble retation and matching implementsProf. HongleiJiaJilin University, China
09:45-10:00 2014-0033Development of an intelligent style of precision maize seederDr. DuanyangGengShandong University of Technology, China
10:00-10:15 Tea Break
Location: Room 311A , the 3rd Floor of CNCCModerator: Prof. Heping Zhu, Lead Scientist in the Application Technology Research Unit (ATRU)
71
Sub-session III4. Harvesting and Animal Husbandry Technology
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Weiming Ding, Nanjing Agricultural University, China
Time Paper # Technical Presentations
08:30-08:45 2014-0450Effects of seed delivery tube and air pressure on the uniformity of seed distributionDongxing ZhangChina Agricultural University, China
08:45-09:00 2014-0904
Development of a PTO driven generator for an electric wheel drive of A potato harvesterZhigang ZhaoGKN Land Systems, China
09:00-09:15 2014-1080Instrumentation design for combine harvester manufactured quality evaluationShumao WangChina Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-0337Design and experimental study on rice drip irrigation under plastic film planterProf. Lei He (Xuegeng Chen)XinJiang Academy of Agricultral and Reclamation Science, China
10:30-10:45 0509-003
Investigation of effective sonic combination for improving quality of red lettuce depending on vegetation stagesDr. Yeseong KangGyeongsang University, Korea
10:45-11:00 2014-0373Optimization design of portable tree transplanting machine’s shock absorberDr. Jianxi ZhuZhejiang University, China
11:00-11:15 2014-0245Biodegradable spray mulching coatings based on hydrolyzed proteinDr. EveliaSchettiniUniversity of Bari, Italy
11:15-11:30 2014-0765
Structure optimization of pollination nozzle on hybrid rice pollination machine and pollination experimentDr. Chen TangZhejiang University, China
11:30-11:45 0509-056
Performance Values of a Disk Chipper During Working with Pomegranate Pruning ResiduesDr. Yiğit.MeteAkdeniz University, Turkey
11:45-12:00 0523-013Investigations and DEM-Simulation of Disc MowersSebastian KemperTU Braunschweig, Germany
72
09:15-09:30 2014-1228
The design and experiment on the short conveying channle of sugarcane billet harvesterQingting LiuSouth China Agricultural University, China
09:30-09:45 2014-0601Simulation of vibration harvesting mechanism for sea buckthornLongsheng FuNorthwest Agricultural and Forestry University, China
09:45-10:00 2014-0213
Cost efficient surface condition determination system for sugar beets for a harvester cleaning control using an industrial RGB cameraVadim TsukorUniversity of Applied Sciences Osnabrueck, Germany
10:00-10:15 Tea Break
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Weiming Ding, Nanjing Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-0715
Organisation and profit-sharing in mechanised sugarcane harvesting: is australias experience relevant to China?Malcolm Keith WegenerThe University of Queensland, Australia
10:30-10:45 2014-0723Analysis of harvesting and logistic concepts for ensiling grassStefan ThurnerBavarian State Research Centre, Germany
10:45-11:00 2014-0994
Introduction, demonstration and promotion of mechanical cassava harvesting in Sub-Saharan AfricaEmmanuel BobobeeAgricultural Research Council; South Africa
11:00-11:15 2014-0393Experiments on Litchi Fruit Mechanical Property and Micro-mechanical DamageMin YeSouth China Agricultural University, China
11:15~11:30 2014-0224Development of 4SY-1.8 Rape WindrowerLei LiHuazhong Agricultural University, China
11:30~11:45 2014-0315
Control System Design for Round Baler/Wrapper Combine Based on Embedded ControllerJianping WangHuhhot Branch of Chinese Academy of Agricultural Mechanization Science, China
11:45-12:00 2014-0228
Design of 4LMZ-160 Ramie Harvester and Analysis on its CutterCheng ShenNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, China
73
Subsession IV5. Robotics and Vehicle Automation
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Qin Zhang, Washington State University, USA
10:00-10:15 Tea Break
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. John Kenneth Schueller,University of Florida, USA
Time Paper # Technical Presentations
08:25-08:45 0825-001KEYNOTE: Perception-based navigation of agricultural vehiclesProf. Shufeng HanDeere & Co., USA.
08:45-09:00 0825-002
Wheel-slip control on an intelligent "Bin-dog" system in natural orchard environmentDr. Yunxiang YeWashington State University, USA
09:00-09:15 0825-004
Principle analysis and parameter optimization for under-actuated end-effector manipulator for apple pickingDr. Yaxin YuZhejiang Sci-Tech University, China
09:15-09:30 0825-005Field evaluation of the robotic twining prototype for high-trellis hop productionDr. Jianfeng ZhouWashington State University, USA
09:30-09:45 0825-006
Research on orchard working vehicle active safety control method based on bodywork attitude predictionDr. Xin WangChina Agricultural University, China
09:45-10:00 2014-0181Innovative density measuring system for new soil compactorDr. Jan HäblerInstitute of Agricultural and Urban Ecological Projects, Germany
Time Paper # Technical Presentations
10:15-10:30 2014-0204
Design and experimental study on the equipment of take directional seedling to the melon category grafting robotDr. Chuanyu WuZhejiang Sci-Tech University, China
10:30-10:45 0825-007
Effects of cross-track errors on sugarcane harvester performance stubble height and cane stalk lossDr. Shaochun MaWashington State University, USA
74
10:45-11:00 0825-008Design and configuration of a walking robot platform for force controlDr. Bo JinZhejiang University, China
11:00-11:15 0825-009
The method of obtaining the relative position and orientation for the master-slave agricultural vehicles based on stereo visionDr. Weiping BiNangjing Agricultural University, China
11:15-11:30 0825-010Automatic navigation system research for rice planterDr. Liguo WeiChinese Academy of Agricultural Mechanization Sciences, China
11:30-11:45 0825-011
Design and implementation of identification and location system for bagging robotDr. Hui WangChineseAcademy of Agricultural Mechanization Sciences, China
11:45-12:00 2014-0130
Design and Optimization of The Stroke Adjustable Chinese Hickory HarvesterXiao-Qiang DuCollege of Mechanical Engineering and Automation, Zhejiang Sci-Tech University
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-17:00
Sub-session I6. Agricultural Bionic Mechanism Design and Manufacturing; Tractors
Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Timothy Simalenga,
Time Paper # Technical Presentations
13:30-13:50 0526-023Improving sticky soil handling capability of disc seeders by bionic modificationProf. Rashid QaisraniDepartment of Agriculture, Fisheries and Forestry, Australia
13:50-14:10 2014-0721Design and development of biomechatronic productsProf. Shujun ZhangThe University of Gloucestershire, UK
Centre for Coordination of Agricultural Research and Development in South Africa
75
14:10-14:30 2014-0055
Structure design and performance evaluation of bionic wheel travelling on sandDr. Rui ZhangJilin University, China
14:30-14:45 2014-0664Performance analysis of planetary gear reducerJing HeShandong University of Science and Technology, China
14:45-15:00 2014-0788Simulation and analysis on a new bionic mechanism to snap corn-earLi ZhangJilin University, China
15:00-15:15 Tea Break
Location: Room 306A, the 3rd Floor of CNCCModerator: Prof. Thomas Stegmaier,
Sub-session II7. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality
German Institute for Textile and Fibre Research Denkendorf, Germany
Time Paper # Technical Presentations
15:15-15:35 2014-0030Bionic mechanism design inspired from biological musculoskeletal systemsDr. Lei RenUniversity of Manchester, UK
15:35-15:55 2014-0028
Reviewing soil-tool adhesion in context of reducing adhesive forces in cohesive soilsDr. Peeyush SoniAsian Institute of Technology, Thailand
15:55-16:15 2014-0194
Design and experimental research on wind turbine blade inspired by the airfoil of Long-eared OwlDr. Weijun TianJilin University, China
16:15-16:30 2014-1416The sand scorpion erosion resistance online detection researchMr. Daobing ChenJilin University, China
16:30-16:45 2014-0854
Bionically inspired serrated structure for improving efficiency of soil surface micro-topography preparationMr. Zhihong ZhangKunming University of Science and Technology, China
16:45-17:00 2014-0711Experimental study on traction performance of wire mesh wheel under light loadMr. Han HuangJilin University, China
76
Time Paper # Technical Presentations
13:30-13:45 0826-323Status and development of the agricultural aerial plant protectionProf. Xuejun YangModern Agricultural Equipment Co.,Ltd., China
13:45-14:00 0519-009
Agricultural applications of the practical utility platform for developing countriesProf. John H Lumkes Jr. Purdue University USA
14:00-14:15 2014-0509
Research status of high-performance rotary potted-seedling transplanting mechanismProf. Gaohong YuZhejiang Sci-Tech University, China
14:15-14:30 2014-1271
Experiment on physical and mechanical properties of seedling pot for automatic vegetable transplanterYanhai TangZhejiang University, China
14:30-14:45 2014-0585Study on the hydraulic performance of semi-permeable membrane moistubeProf. Yanxiang ZhuJiangsu University, China
14:45-15:00 2014-0811
A research on intelligent of semipermeable membrane micro-moist irrigation technologyProf. Cheng YanJiangsu University, China
15:00-15:15 Tea Break
Location: Room 311A , the 3rd Floor of CNCCModerator: Prof. Allen Jack McHugh, University of Southern Queensland, Australia
Time Paper # Technical Presentations
15:15-15:30 0519-012
Development and performance evaluation of a liquid manure injector for sustainable crop productivityDr. S. I. ManuwaLandmark University, Nigeria
15:30-15:45 2014-1440
The mechanical operation technology and necessary machinery in burying straw deeply into dry fieldsDr. Ruili WangShenyang Agricultural University, China
Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Hongwen Li, China Agricultural University, China
77
Subsession III8. Harvesting and Animal Husbandry Technology
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Weiming Ding, Nanjing Agricultural University, China
15:45-16:00 0526-008
The Effect of Vacuum Plate Peripheral Speed of Seed Spacing Accuracy with a Vacuum Type Precision Metering UnitDr.Tülek CerenEge University, Turkey
16:00-16:15 0509-048A Study on the Static Stability of Scissor LiftDr.Chen ZhangCivil Aviation University of China, China
16:15-16:30 2014-0970
Research on introducing gravity and centrifugal force to improve the filling ability of vertical seed-plateProf. Hongxin LiuNortheast Agricultural University, China
16:30-16:45 2014-0220
Design of two-degree-of-freedom manipulator for transplanting rice potted-seedlings based on single-chip controlDr.Yuanjun FanSouth China Agricultural University, China
16:45-17:00 2014-1540
Design and experiment of the 7.5cm row spacing mechanical precise seeder for wheatDr.Jin ZhaoAgricultural University of Hebei, China
Time Paper # Technical Presentations
13:30-13:45 2014-0372Mechanics model analysis and properties test of cabbage root during cutting processDongdong DuZhenjiang university, China
13:45-14:00 0826-339Analysis and experimental study on stripping process of corn headerAijun Geng, Shandong Agricultural University, China
14:00-14:15 0514-011Analysis of the present situation and the problem of tomato harvesterZhaohui HaoChineseAcademyofAgriculturalMechanizationSciences, China
14:15-14:30 2014-1073
The experiment study of the effect of leaf-stripping and tail-broking speed on sugarcane leaf-stripping and tail-broking qualityJinbing HuZhenjiang University, China
14:30-14:45 2014-1513Performance experiment for grain separation losses monitoring sensorZhenwei LiangJiangsu University, China
78
15:00-15:15 Tea Break
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Weiming Ding, Nanjing Agricultural University, China
Time Paper # Technical Presentations
15:15-15:40 0826-337
Intelligent monitoring and control technology on the cotton picker machine with packingZhonghua MiaoShanghai University, China
15:40-16:05 2014-0124
Effects of growth characteristics of sugarcane clusters and cutting height on harvester performance: cutting qualityShaochun MaWashington State University, USA
16:05-16:30 2014-0913
Research on movement and simulation platform of wine grape vibration-separation mechanismPanpan YuanShihezi University, China
Sub-session IV9. Spectroscopy, Machine Vision, and Biosensing
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Enrong Mao, China Agricultural University, China
Time Paper # Technical Presentations
13:30-13:45 2014-1202Crop sensing using vehicle-based and handheld high-throughput phenotypersProf. Naiqian ZhangKansas State University, USA
13:45-14:00 0825-012
Apple Identification in Field Environment with Over the Row Machine Vision SystemDr. Abhisesh SilwalWashington State University, USA
14:00-14:15 0825-013
Design and performance test of active light source spectrometer for measuring crop canopy reflection spectrumDr. Yang LiNangjing Agricultural University, China
14:45-15:00 2014-0713
Study on dispersion process of granular material in three dimensional parallel vibration sieveZheng MaJiangsu University, China
79
15:00-15:15 Tea Break
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Naiqian Zhang, Kansas State University, USA
Time Paper # Technical Presentations
15:15-15:30 2014-1193In-field sensing for corn plant architectureDr. Ning WangOklahoma State University, USA
15:30-15:45 2014-0874
Monitoring and managing hydroponic nutrients using ion-selective electrodes in closed lettuce cultivationDr. Daehyun JungSeoul National University, Korea
15:45-16:00 2014-1499
Assessment of chlorophyll contents in dendrobium officinale kimura et migo leaves using hyperspectral imaging techniqueDr. Xibin DingZhejiang University, China
16:00-16:15 2014-1455
Raman spectroscopic study of the upper epidermis of tea in different growth periodDr. Liubin LuoZhejiang University, China
16:15-16:30 2014-1492Estimation of the apple flowers based on aerial multispectral imageDr. Lihua ZhengChina Agricultural University, China
16:30-16:45 0825-016Development of NDVI measurement device based on active light sourceMeng ZhangChina Agricultural University, China
16:45-17:00 2014-0810Design of intelligent target fruit tree insecticide sprayerDr. Wei ZouNational Research Center of Intelligent Equipment for Agriculture, China
14:15-14:30 2014-0441
Rapid diagnosis of tomato nutrition level based on spectral and image information fusion technologyDr. Hongyu LiuJiangsu University, China
14:30-14:45 0825-014Research on cotton row detection algorithm based on binocular visionDr. Zhongxiang Zhu, China Agricultural University, China
14:45-15:00 0825-015Nitrogen nutrition diagnosis of wheat canopy based on spectroscopyDr. Yi ZhaoChina Agricultural University, China
80
SEPTEMBER 18, 2014
THURSDAY MORNING
8:30-12:00
Time Paper # Technical Presentations
08:30-08:45 0509-022Tractor instrumentation for draft energy requirement studies in south africaProf. Moses OkothMarenyaUniversity of Venda, South Africa
08:45-09:00 2014-0668A proportional controller for electro-hydraulic hitch system in heavy tractorJianjun ZhaoChina Agricultural University, China
09:00-09:15 0526-005
Evaluation of Power Transmission System of the Tractor Manufactured in Turkey From the Point of Multi-Gear Speed RatiosKomekci FiratDepartment of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey
09:15-09:30 2014-0460A rapid design method for complex gearbox on high-power tractorProf. Zhenghe SongChina Agricultural University
09:30-09:45 2014-0305Development and testing of a small remote control hillside tractorProf. Fuzeng YangNorthwest A&F University
09:45-10:00 2014-1469
Design and overcoming obstacles abilities research of tracked driving chassis with planetary structureDr. Pingyi LiuChina Agricultural University, China
10:00-10:15 Tea Break
Location: Room 306A, the 3rd Floor of CNCCModerator: Zhenghe Song, China Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 0618-071
Physical and contact characteristics of seat foam materials for agricultural tractor seating comfortDr. Xiaoping JinChina Agricultural University, China
Sub-session I10. Agricultural Bionic Mechanism Design and Manufacturing; Tractors
Location: Room 306A, the 3rd Floor of CNCCModerator: Zhenghe Song, China Agricultural University,China
81
Subsession II11. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality
Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Shuqi Shang, Qingdao Agricultural University, China
10:30-10:45 0508-002Simulation on handling stability performance of 4WS vehicleDr. Ying HanNanjing Agricultural University, China
10:45-11:00 2014-0515
A knowledge base system for rapid design on agricultural machinery chassisDr. Yu ChenChina Agricultural University, China
11:00-11:15 2014-0342
Hardware design of electronic control system for tractor power shift transmission based on dual-core MCUQingmei CaoHenan University of Science and Technology, China
Time Paper # Technical Presentations
08:30-08:45 2014-1596
Evaluation of soil compaction under conservation tillage in south africaDr. Tingmin YuAgricultural Research Council – Institute for Agricultural Engineering, South Africa
08:45-09:00 2014-1588
Simulation of soil dynamic behaviors of seed openers using the discrete element method (DEM)Dr. Haibo ZhouJiamusi University, China
09:00-09:15 0618-040Manufacturing agricultural utility vehicles in sub-saharan africaDavid D. WilsonPurdue University, USA
09:15-09:30 0618-0148
Research on automatic corn seedling transplanterDr. Tie ShiHeilongjiang Province Academy of Agricultural Machinery Engineering Science, China
09:30-09:45 2014-0142
3 D DEM Modeling of Single Disc Furrow Opener Draft Force in Paddy Soil Under No Till SoilDr.Fiaz AhmadNanjing Agricultural University, China
09:45-10:00 2014-1044
Effect of Constant Pressure Agitating on Performance of Fluid Hill-drop SeederDr.Lanxin LiuShenyang Agricultural University, China
82
10:00-10:15 Tea Break
Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Vladislav Minin,
Sub-session III12. Harvesting and Animal Husbandry Technology
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Emmanuel Bobobee, Agricultural Research Council, South Africa
Time Paper # Technical Presentations
08:30-08:45 0826-340Research on transporting technologies of standing corn straw plantsLingxin GengHenan University of Science & Technology, China
Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia
Time Paper # Technical Presentations
10:30-10:45 2014-0275
Experimental study of modified starch glue effect on the quality of directional corn seed beltDr. Xueguan ZhaoChina Agricultural University, China
10:45-11:00 2014-0154
Experimental Study on The Filling Performance of Maize Bowl-tray Precision SeederDr. Xin MaoHeilongjiang Bayi Agricultural University, China
11:00-11:15 2014-0525
Influence of Cold Plasma Treatment on Ear Characters and Group Quality of WheatDr. Chen TangZhejiang University
11:15-11:30 2014-0260Vibrating Threshing Performance of wine GrapeProf. Liming XuChina Agricultural University, China
11:30-11:45 2014-0905
Design and Experimental Study on the Device for Measuring the Charge-to-Mass Ratio of the Charged DropletsProf. BaijingQiuJiangsu University, China
11:45-12:00 2014-1044
Effect of Constant Pressure Agitating on Performance of Fluid Hill-drop SeederDr. Lanxin LiuShenyang Agricultural University, China
12:00-12:15 2014-0428
Design and Optimization on a Double-Concave Rocker Seedmeter for Precision SeedingDr. Jiale ZhaoJilin University, China
83
08:45-09:00 0826-341
Experimental study on modulation technology of corn straw compression mode based on different conditions of compressionXin DongNortheast Agricultural University, China
09:00-09:15 0826-342
Application and research of no-till reseed technology in the natural grassland vegetation restorationKu BuGrassland Research Institute of Chinese Academy of Agricultural Sciences, China
09:15-09:30 0826-343
Straw collecting, baling and comprehensive utilization technique and equipmentXifeng LiuHeilongjiang Province Agricultural Machinery Engineering Scientific Academy, China
09:30-09:45 0826-344Wet harvest technology research and development of solar energy forage dryingJianqiang DuHuhhot Branch of Chinese Academy of Agricultural Mechanization Scienc, China
09:45-10:00 2014-1563Study on the technical regulation of alfalfa hay mechanized harvestingBei WuChinese Academy of Agricultural Mechanization Sciences, China
10:00-10:15 Tea Break
Location: Room 306B, the 3rd Floor of CNCCModerator: Prof. Emmanuel Bobobee, Agricultural Research Council; South Africa
Time Paper # Technical Presentations
10:15-10:30 2014-0086
Finite Elements Analysis of The Cutter Component in Disc Saw Cutting CaraganaKorshinskii HarvesterShujin QiuShanxi AgriculturalUniversity, China
10:30-10:45 2014-0749
Design of scooping plastic film mulch planter and seeding performance test of cottonFei LiuInner Mongolia Agricultural University, China
10:45~11:00 2014-0880
Three-dimensional Design of A Higher Ground Clearance Combine Harvesters for Ratooning RiceKangyi ZhaiHuazhong Agricultural University, China
11:00~11:15 2014-0986Design and Study on Metering Device of Pneumatic Grass SeederGaixia Zhai Chinese Academy of Agricultural Mechanization Sciences, China
11:15~11:30 2014-0362Design and Experiment of 4SY-1.8 Rape Walking WindrowerYitao LiaoCollege of Engineering ,Huazhong Agricultural University, China
84
Sub-session IV13. Automation for Off-Road Equipment
Location: Room 311B, the 3rd Floor of CNCCModerator: Dr. Noboru Noguchi, Hokkaido University, Japan
Time Paper # Technical Presentations
08:30-08:45 0825-017
Multisensor data fusion isobus-solution for a sensor based fertilizer application systemProf. Hermann AuernhammerMunich University of Technology, Germany
08:45-09:00 0825-018Crop sensors for automation of in-season nitrogen applicationDr. Kenneth A. SudduthCropping Systems and Water Quality Research Unit,USDA-ARS , USA
09:00-09:15 0825-019
An intelligent control system for the agricultural materials discharge equipment based on electronic forkliftQing XieChina Agricultural University, China
09:15-09:30 0825-020Research on rapid toe-in detection method for assembled combine harvesterYawei ZhangChina Agricultural University, China
09:30-09:45 2014-1561Control system of kiwifruit picking end-effectorZhen LiNorthwest A&F University, China
09:45-10:00 2014-0112
A knowledge-based application to improve transmission system design automation for agricultural machinesXiaoping JinChina Agricultural University, China
10:00-10:15 Tea Break
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. Minzan Li, China Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 0618-057
Changes of the color distribution and vegetation index according to red leaf lettuce’s growthDr. Seongheon KimGyeongsang National University, Korea
10:30-10:45 0825-021An automated gps-based variable- rate aerial spraying system for uavDr. Yanchao ZhangZhejiang University, China
85
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-16:00
Sub-session II14. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality
Location: Room 311A, the 3rd Floor of CNCCModerator: Prof. Kienzle Josef, FAO
Time Paper # Technical Presentations
13:30-13:45 2014-0555Evaluating optimization of thermal resistance of rice straw particlesZarei ElmiraZhejiang Universtity, China
13:45-14:00 2014-1544Experimental study of mixing uniformity in jet-mixing apparatusBaijing QiuJiangsu University, China
14:00-14:15 2014-0459Study on mechanization of banana productionZhou YangSouth China Agricultural University, China
14:15-14:30 2014-1517
The influence of single, double subsoiler on soil disturbance under subsoiling conditionsYuxiang HuangNorthwest A & F University, China
10:45-11:00 0825-022Automatic steering system of tractor based on proportional directional valveDr. Zhongxiang ZhuChina Agricultural University, China
11:00-11:15 0825-023Design of hydraulic control valves for tractor autopilot systemDr. Quan JiaChinese Academy of Agricultural Mechanization Sciences, China
11:15-11:30 2014-0778
The structural design and simulation analysis of the palletizing robot and bagged materials handling equipmentWenzhuo WangChina Agricultural University, China
86
15:00-15:15 Tea Break
Time Paper # Technical Presentations
15:00-15:15 2014-1039
Effects of the Depth of Machine Sowing on Growth Characteristics of Rapeseed Harvest TraitsDr. Wei XiangHunan Agricultural University, China
15:15-15:30 2014-0115Design of the performance testing device for planter openersDr. Jinhui ZhaoChinese Academy of Agricultural Mechanization Sciences, China
15:30-15:45 2014-1504
The Experimental Research and Analysis of the Seed- Meter Device of the Precision Spaced Planter for CornDr. Wei YangMenobleco.ltd, China
15:45-16:00 2014-1378Study on Seeding Methods of Cucurbits Seedlings for GraftingDr. Tong ChenNorthwest A & F University, China
Sub-session IV15. Precision Farming and Aerial Applications
Location: Room 311B, the 3rd Floor of CNCCModerator: Prof. John Kenneth Schueller, University of Florida, USA
Time Paper # Technical Presentations
13:30-13:45 0825-036
Unmanned aerial vehicle-based remote sensing system for soybean high-throughput phenotypingDr. Lei F. TianUniversity of Illinois at Urbana-Champaign,USA
13:45-14:00 2014-1522An information acquisition system of vegetable safety based on web serviceDr. Lihua ZhengChina Agricultural University, China
14:30-14:45 2014-1109Research on the buds-injury-prevention system in sugarcane-seeds cuttingProf. Yiqi HuangGuangxi University, China
14:45-15:00 2014-0380
Effect of Replacing Nutrient Solution on Nitrogen Utilization for Aeroponic Culturing LettuceDr. Ibraimo Teleha ChabiteJilin University, China
87
14:00-14:15 0508-030
Determination of ascorbate peroxidase and acetolactate synthase content in barley leaves using visible/near-infrared spectroscopyChu ZhangZhejiang University, China
14:15-14:30 0825-024
Design of wireless sensor network nodes for intelligent monitoring system of micro-irrigation in litchi orchardJiaxing XieSouth China Agricultural University, China
14:30-14:45 2014-0347An electronic tongue for investigation of strawberry juice characteristicsShanshan QiuZhejang University, China
14:45-15:00 0825-025
Design and implementation of gateway for hybrid antenna clustering routing algorithm in paddy monitoring Baoxia SunSouth China Agricultural University, China
15:00-15:15 Tea Break
88
SESSION III
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
08:30 - 12:00
Topic (1) Terrain-machine bionic engineering and tractors technology
No. Poster # Paper # Paper Titles Institution Country
1 31-001 0508-024
Body Height Adjustment System for Vehicles with
Electrically Controlled Air Suspension based on Neural
Network PID Control
Chen YuexiaSchool of Automobile and
Traffic Engineering, Jiangsu University
China
2 31-002 0618-051
Low Altitude and Low Speed Control of Agricultural
UAV Based on Binocular Recognition Technology
Wang ZhigangDepartment of Mechatronics
Engineering, Applied Technology College, Jilin
University, Changchun, Jilin, China
China
3 31-003 0618-052
Rugged Terrain Agricultural Information Acquisition
Vehicle Based on Quadruped Bionic Theory
Wang ZhigangDepartment of Mechatronics
Engineering, Applied Technology College, Jilin
University, Changchun, Jilin, China
China
4 31-004 0618-056 Design of Tractor CAN Bus System based on ISO11783
Yan XianghaiDepartment of Vehicle Engineering, Vehicel &
Transportation Engineering, Henan University of Science and Technology, Luoyang,
China
China
5 31-005 2014-0279
Experimental Study on the Abrasive Wear of Bionic
Blade for Soil-rototilling and Stubble-breaking
Ji WenfengHuazhong Agricultural
UniversityChina
6 31-006 2014-0302
The observation of Himalayan marmot’s claw and analysis of the claw’s soil cutting mechanism
Zhang RongrongJilin University China
89
7 31-007 2014-0414
Bionic Design and Structural Analysis of Stubble-cutting
Blades Using Finite Element Method
Li MoJilin University China
8 31-008 2014-0463
Design on The Integrated Hydraulic System for High Clearance Self-propelled Agricultural Machinery
Chassis
Chen SuiyingChina Agricultural University China
9 31-009 2014-0578
Skyhook-based Body-seat System Simulation for A Semi-active Suspension
Tractor
Song SennanCollege of Engineering, China Agricultural University, Beijing
100083, China
China
10 31-010 2014-0641Study on a 3-finger bionic manipulator for picking up
an apple
Xiao YingkuiCollege of Biological and
Agricultural Engineering,Jilin University
China
11 31-011 2014-0713Experimental Research of
Biomechanical Properties of Rape Stalks
Ma ZhengKey Laboratory of Modern Agricultural Equipment and
Technology, Ministry of Education & Jiangsu Province, Jiangsu University, Zhenjiang
Jiangsu, China
China
12 31-012 2014-0798The Experimental
Researched on Piston Skirt with Bionic Hole
Wu BoKey Laboratory of Bionic Engineering, Ministry of
Education, Jilin University, Changchun, China
China
13 31-013 2014-0876 The Discussion of Caterpillar Wear Mechanism
Li YaoweiHohhot Vocational College China
14 31-014 2014-0916
Based on Hydraulic Steering Tractor Automatic
Navigation System Development
Fu WeiqiangNational Research Center
of Intelligent Equipment for Agriculture
China
15 31-015 2014-0939Analysis of the Kinematics
of Chinese Mitten Crab Moving on Enough Terrains
Zhang XiaodongSchool of Mechanical Engineering, Liaoning
University of Petroleum &Chemical Technology
China
16 31-016 2014-0940
Research on the Model Analysis and Failure
Analysis of Electric Bus Quick Change Battery Box
Zhao JianzhuCollege of Engineering, China
Agricultural UniversityChina
17 31-017 2014-1197
The Three Dimensional Numerical Simulation of
Anti-erosion Properties of the Chiton Acanthochiton
Rubrolineatus
Tian XimeiSecretariat of the International Society of Bionic Engineering,
Jilin University
China
90
18 31-018 2014-1308
Research on a New Bionic Walking Wheel with High
Trafficabilities of Travelling on Sand and Surmount
Obstacles Based on Ostrich Foot
Zhang RuiCollege of Biological and
Agricultural Engineering, Jilin University
China
19 31-019 2014-1415
Unparalleled Sensitivity of Photonic Structures in Trogonoptera Brookiana
Butterfly Wings
Yang MengKey Laboratory of Bionic Engineering (Ministry of Education, China), Jilin
University
China
20 31-020 2014-1431 Study on coupling bionic technology for crop harvest
Fu JunKey Laboratory of Bionic Engineering,Ministry of
Education,Jilin University
China
21 31-021 2014-1582Design of Tractor AMT
Electronic Control System Based on DSP
Zhang JingyunDepartment of Vehicle and
Transportation Engineering, Henan University of Science
and Technology
China
22 31-022 2014-1583Fault Diagnosis Research of Tractor AMT Sensors Based
on SVR
Yan XianghaiDepartment of Vehicle and
Transportation Engineering, Henan University of Science
and Technology
China
23 31-023 2014-0167Mathematical Model of
Plantar Surface of Ostrich Didactyl Foot
Zhang RuiJilin University China
24 31-024 2014-0746The Design of Bionic
Circular Saws Based on Badger Teeth
Gao ZhihuiCollege of Biological and
Agricultural Engineering, Jilin University, Changchun,China
China
25 31-025 2014-1466Research and Manufacture
of Stepless Regulation Wheelbase Vehicle
Liu PingyiCollege of Engineering, China
Agricultural UniversityChina
26 31-026 0618-028The Applications of Grid Animation in Production
Safety
Liu PingyiCollege of Engineering, China
Agricultural UniversityChina
27 31-027 0526-033 Inspirations Learning from Far-back Natural Ecology
Tong JinThe College of Biological
and Agricultural Engineering, Jilin University, 5988 Renmin
Street, Changchun 130025, China
China
28 31-028 2014-1402 Mechanical properties of corn stubble
Mu HaifengKey Laboratory of
Engineering Bionics(Ministry of Education,China),Jilin
University
China
91
Topic (3) Harvesting and Animal Husbandry Technology
No. Poster # Paper # Paper Titles Name & Institution Country
29 33-001 2014-0317
Analysis of the Experiments on the Airflow Distribution of Double Centrifugal Fans over
Oscillating Sieve
Cui JunweiModern Agricultural Equipment Co.Ltd.
China
30 33-002 2014-0322Research and development on the key technologies of plot
combine harvester
Wang JiashengQingdao Agricultural
UniversityChina
31 33-003 2014-0352
Analysis of Caragana Korshinskii Combined Harvester
Dial Tooth Type Conveying Mechanism
Duan ZhenhuaShanxi Agricultural
UniversityChina
32 33-004 2014-0361Simulation of Cyclone
Separating and Cleaning System of Soybean Thresher
Zhao XueguanChina Agricultural
UniversityChina
33 33-005 2014-0408Design and Experiment of the Semi Feeding Harvester Spiral
Knife Removing Membrane
Xu JikangQingdao Agricultural
UniversityChina
34 33-006 2014-0421
Design and Experiment on Differential Speed Snapping Rollers for Horizontal Roller
Corn Harvester
Wang WangJilin University China
35 33-007 2014-0531
Experiment on Mechanical Properties of Corn Plant Related
to Corn Stripping Harvest Mechanism
Zhang ZhilongDepartment of Engineering,
China Agricultural University, Beijing, China
China
36 33-008 2014-0535
Discussion of Relationship between the Rice Grain′s Link Force and Threshing Tooth′s
Line Speed
Chen DejunJinhua Polytechnic,Jinhua
321007,ChinaChina
37 33-009 2014-0558Optimization Design and
Experiment of A Husker Roller for Maize Harvester
Cui TaoDepartment of Engineering,
China Agricultural University, Beijing, China
China
38 33-010 2014-0617 Optimization Design of Strip till Mechanism
Wu WeixiongSouth China Agricultural
UniversityChina
39 33-011 2014-0712
Study on Structural and Operating Parameters of A Cob-
picking and Stalk-chopping Combined Mechanism
Cui TaoDepartment of Engineering,
China Agricultural University
China
92
40 33-012 2014-0781
Structure Optimization for Chassis Frame of Combine
Harvester Based on Sensitivity Analysis
Xu LizhangKey Laboratory of Modern
Agricultural Equipment and Technology,Ministry of Education and Jiangsu
Province, Jiangsu University
China
41 33-013 2014-0823Design and experiment of a
novel laser leveling system for corn harvester
Xing YazhouMechanical and electrical engineering College,Hebei
Agricultural University
China
42 33-014 2014-0897Simulation and Optimization of the Raking Mechanism of
Horizontal Rotary Rake
Zhai GaixiaHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences
China
43 33-015 2014-0946
Fatigue Reliability Analysis of Combine Harvester Frame Based on The Load Spectrum
Experiment
Li FuqiangCollege of Engineering,
China Agricultural University
China
44 33-016 2014-0974
Simulation and Optimization of Multi-link Individual Profiling
Ditching and Repression Mechanism of Grass Seeder
Li YangHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences
China
45 33-017 2014-1162
The Variation of Material Performance and its Influence on Fatigue for Caterpillar Harvester
in its Operation
Geng GuishengChinese Academy of
Agricultural Mechanization and Sciences
China
46 33-018 2014-1167
Numerical Simulation and Optimization of Field on Air-
and-screen Cleaning Mechanism Based on CFD
Su TianshengChinese Academy of
Agricultural MechanizationSciences
China
47 33-019 2014-1384
Pseudo-rigid-body Modeling for Underactuated Strawberry Harvesting Manipulator with Rigid-compliant Structured
Liu ChangDepartment of Mechanical & Electrical Engineering,
Hebei Agricultural University
China
48 33-020 2014-1476
Three Potato Harvester Comparative Experimental
Study on Working Performance and Analysis
Wang DongweiQingdao Agriculture
University institute of Electrical and Mechanical
engineering
China
49 33-021 2014-0975Experiments of Factors Affecting
Corn Grain Loss Rate on Two Types of Snapping Rolls
Sun XuefengSchool of Agricultural and
Food Engineering, Shandong University of Technology
China
93
50 33-022 2014-1614
Experiments of Chopped Power Consumption Performance on
Variable Feeding Angle Cutting Corn Stalks Device
Lu ShanwenSchool of Agricultural and
Food Engineering, Shandong University of Technology
China
51 33-023 2014-0223Effect of straw chopped based on the different angle of corn
Harvesting
Li QijunShandong University of
TechnologyChina
52 33-024 2014-0852
Study on dynamical simulation of Hydraulic system for
Caragana harvester based on SIMULINK
Zhang XiuquanShanxi Agricultural
University, engineering institute
China
53 33-025 2014-1054
Experiment of Influencing Factors of Stalk Scatters and
Chopped Effect in Corn Vertical Cutting Device
Yin ChenghaiSchool of Agricultural and
Food Engineering, Shandong University of Technology
China
54 33-026 0519-020Design and Experiment of Wheat Straw Cutting Reciprocating Test
Bench
Hou Jialin Mechanical and Electronic
Engineering College, Shandong Agriculture
University
China
55 33-027 2014-0126
Design and Flow Field Simulation ofThe Key
Components of Safflower Harvest Device
Ge YunDepartment of Mechanical and Electrical Engineering,
Shihezi University, Xinjiang, China
China
56 33-028 2014-0710Numerical simulation of internal flow field in centrifugal fan with
double outlet and multi-duct
Xu LizhangKey Laboratory of Modern
Agricultural Equipment and Technology, Ministry
of Education, Jiangsu University
China
57 33-029 2014-0758
Changes in Chemical, Biochemical and Aroma Volatile
Composition of Pomegranate Juice (cv. Wonderful) at
Different Maturity Stages and Agro-climatic Locations
Rebogile R. MphahlelePostharvest Technology
Research Laboratory, South African Research Chair in Postharvest Technology,
Department of Horticultural Sciences, Faculty of
AgriSciences, Stellenbosch University, Private Bag X1,
Stellenbosch 7602
South Africa
58 33-030 2014-0467Optimization of Parameters
for Sugarcane Lifter Based on Virtual Response Surface Test
Hu Jinbing,School of Biosystems Engineering and Food
Science, Zhejiang University
China
94
Topic (4) Automation Technology
No. Poster # Paper # Paper Titles Name & Institution Country
59 34-001 0526-019The Detection System of The
Droplet Impact Force Based on PVDF Sensor
Zheng YongjunCollege of Engineering,
Mechatronic engineering, China Agricultural University
China
60 34-002 0618-057
Changes of the Color Distribution and Vegetation index according to Red Leaf
Lettuce’s Growth
Seongheon KimDepartment of Bio-Industrial
Machinery Engineering, Gyeongsang National
University, Jinju, Korea)
Korea
61 34-003 0618-061Crop and Weed Detection
Method by AOTF Hyper-spectral Imaging System
Mao WenhuaInstitute of Mechatronics
Technology and Application ,Chinese Academy of
Agricultural Mechanization Sciences, Beijing, China
China
62 34-004 0618-086
Study on New Returning Techniques of Wheat/Corn Straw
and Problem of Controlling Environmental Pollution
Zhang DaolinDepartment of Agricultural and
Food Engineering Shandong University of Technology
China
63 34-005 2014-0112
A Knowledge-based Application to Improve Transmission
System Design Automation for Agricultural Machines
Xiaoping JinCollege of Engineering,
China Agricultural University, Beijing, China
China
64 34-006 0618-072
Development of a portable detector for determining nitrogen status of apple using active light
source
Zhang YaoKey Laboratory of Modern
Precision Agriculture System Integration Research, China
Agricultural University, Ministry of Education
China
65 34-007 2014-0122
Development of a Spraying System on UAV for Precision
Aerial Application
Yubin LanUSDA, ARS, USA
United States
67 34-009 2014-0188
Aquiculture Remote Monitoring and Control Equipment Based
on Automatic Cruise Boat
Meng XiangbaoGuangdong Institute of Modern
Agricultural EquipmentChina
68 34-010 2014-0213
Cost Efficient Surface Condition Determination System for Sugar Beets for a Harvester Cleaning
Control using an Industrial RGB Camera
Vadim TsukorUniversity of Applied Sciences
OsnabrueckGermany
69 34-011 2014-0231
Fruit and leaves detection method based on hyper-spectral
imaging
Mao WenhuaChinese Academy of
Agricultural Mechanization Sciences
China
95
70 34-012 2014-0239
Application for GNSS-navigation Technology in
Precision Agriculture
Zhang AoHaida satellite navigation technology co., LTD in
guangzhou
China
71 34-013 2014-0267
Communication Between ARM and DSP through SPI Bus
Yang FuzengNorthwest A&F University China
72 34-014 2014-0268
Design of a Greenhouse Remote Control Speed Electric Tractor
Yang FuzengNorthwest A&F University China
73 34-015 2014-0281
The Design and Simulation of A Novel Gripper for The Fruit
Picking Robot
Yang FuzengNorthwest A&F University China
74 34-016 2014-0282
The Hillside Tractor Positioning Technology Research Based on
Multi-sensor Information Fusion
Yang FuzengNorthwest A&F University China
75 34-017 2014-0304
A Three-Dimensional Nondestructive Detection
System for Plant Roots in Situ Based on Flat Panel Detector
Zhou XuechengSouth China Agricultural
UniversityChina
76 34-018 2014-0305
Development and Testing of A Small Remote Control Hillside
Tractor
Yang FuzengNorthwest A&F University China
77 34-019 2014-0399
Tube Stamp for Mechanical Intra-row Individual Plant Weed
Control
Frederik Langsenkamp,Faculty of Agricultural
Sciences and Landscape Architecture, University of
Applied Sciences Osnabrueck
Germany
78 34-020 2014-0412
Detection of Chlorophyll Content of Rice Leaves by Chlorophyll Fluorescence
Spectrum Based on PCA-MLP
Zhou LinaJilin University China
79 34-021 2014-0417
A Tillage Depth Monitoring System for Tillage Machine
Jia HongleiCollege of Biological and
Agricultural Engineering, Jilin University, Changchun, China
China
80 34-022 2014-0438
Design and Experiment of a Sowing Monitor Based on Fiber-
optic Sensors for Precision Planter
Luo Dalong,China Agricultural University China
81 34-023 2014-0441
Rapid Diagnosis of Tomato Nutrition Level Based on
Spectral and Image Information Fusion Technology
Liu HongyuInstitute of Agricultural
Engineering, Jiangsu University
China
82 34-024 2014-0517
Actual Grain Flow Estimating Based on Process Neural
Networks
Wang HeShenyang Institute of
Automation Chinese Academy of Science, Shenyang 110016,
China
China
96
83 34-025 2014-0539
Experimental Study on Pneumatic Precision Seed-metering Device for Maize
Shi SongCollege of Engineering,
China Agricultural University, Beijing, China
China
84 34-026 2014-0540
Motion Analysis and Simulation Optimization of Web Type
Wang FangyangCollege of Engineering,
China Agricultural University, Beijing 100083, China
China
85 34-027 2014-0562
Study Litchi Fruit Image Segmentation Methods and Algorithms: a Comparison
Liu TianhuCollege of Engineering, South China Agricultural University, Guangzhou, Guangdong, China
China
86 34-028 2014-0707
Sex Determination of Hatching Chicken Embryo by Hyperspectral Transmittance
Imaging
Hu Pengcheng China
87 34-029 2014-0750
The Analysis of Soil Temperature Sensor’s Measure Technology
and a New Design of Assemble sensor
Zhang XinBeijing Research Center
for Intelligent Agricultural Equipment, Beijing, China
China
88 34-030 2014-0817
Development of Automatic Aquatic Plant Cleaning Ship
Control System
Liu HuiguiSchool of Electrical and
Information Engineering , Jiangsu University
China
89 34-031 2014-0900
Simulation and Experimental Verification of Air Spraying Drift
on N-3 UAV
Zhang SongchaoNanjing Research Institute for Agricultural Mechanization,
Ministry of Agriculture
China
90 34-032 2014-0936
Development and Experimental Study on Spraying Device for
Stellera
Zhao JianzhuThe College of Engineering of China Agricultural University
China
91 34-033 2014-0990
Effects of UAV flying heights on the accuracy of field plot
mapping
CHAN CHEE WAN,Mechanisation and Automation
Research CenterMalaysia
92 34-034 2014-1032
Design of a GNSS Land Levelling Equipment
Bao HanBeijing Research Center for Information Technology in
Agriculture
China
93 34-035 2014-1200
Grain Flow Signal Reduction Noise Using EMD
Wang HeShenyang Institute of
Automation Chinese Academy of Science
China
94 34-036 2014-1397
Design and Testing of the Control System of the Seedling Precision Seeder in Rice Paddy
Field
Kuang JianxiaCollege of Engineering, South China Agricultural University
China
97
95 34-037 2014-1513
Performance Experiment for Grain Separation Losses
Monitoring Sensor
Liang ZhenweiKey Laboratory of Modern
Agricultural Equipment and Technology, Ministry of Education and Jiangsu
Province, Jiangsu University
China
96 34-038 2014-1532
Development of a Portable Water Turbidity/Transparency Detector
Based on NIR Spectroscopy
Zheng LihuaKey Laboratory of Modern
Precision Agriculture System Integration Research,
Ministry of Education, China Agricultural University
China
97 34-039 2014-1608
Multispectral induced fluorescence versus spectral
reflectance for determining the winter wheat Nitrogen deficit
Jana GalambosovaDepartment of Machines and
Production Systems, Faculty of Engineering, Slovak University
of Agriculture in Nitra
Slovakia
98 34-040 2014-0667
Simulating and Experimental Analysis on Multi-directional
Valve of Heavy Tractor Electro-hydraulic Hitch
Jianjun ZhaoCollege of Engineering,
China Agricultural University, Beijing, China
China
99 34-041 0825-026The development of gateway note used in intelligent field
information
Yao WenKey Laboratory of Modern
Precision Agriculture System Integration Research, China
Agricultural University
China
100 34-042 2014-0809
Automatic Classification of Seedling Quality Based on
Adaptive Clustering Algorithm
Yu HaiyeKey Laboratory of Bionic
Engineering, Ministry of Education, School of
Biological and Agricultural Engineering, Jilin University
China
101 34-043 0825-027Dynamic Modeling of the
Leveling System of Paddy Field Laser Leveler
Zhao ZuoxiSouth China Agricultural
UniversityChina
102 34-044 0825-028
A Matlab-based Hardware-in-the-loop Platform for BUG
Algorithm Simulation and Testing
Zhao Zuoxi,South China Agricultural
UniversityChina
103 34-045 0825-029Development of yield
measurement model based on IPC of grain combine
Li XinchengKey Laboratory of Modern
Precision Agriculture System Integration Research,
Ministry of Education, China Agricultural University
China
104 34-046 0825-030Determination of Nitrogen
in Soil Using Laser-Induced Breakdown Spectroscopy
Zhang JunningNational Key Laboratory of Soil-Plant-Machine System
China
98
105 34-047 0825-031Development of control system
for cottonseed delinting machine based on virtual instrument
Limming ZhouChinese Academy of
Agricultural Mechanization Sciences
China
106 34-048 0825-032Development of a soil electrical conductivity detection system
based on ARM
Pei XiaoshuaiKey Laboratory of Modern
Precision Agriculture System Integration Research, China
Agricultural University
China
107 34-049 0825-033Online Detection Welding
Quality of Threshing Drum in Rice and Wheat Harvester
Yao RongChinese Academy of
Agricultural Mechanization Sciences
China
108 34-050 0825-034Study on Power Matching
Control of Hydraulic Sugarcane Harvester
Gao YingjieHebei Key Laboratory of
Heavy Machinery Fluid Power Transmission and Control,
Yanshan University
China
109 34-051 0825-035Design of Hydraulic System for Whole Stalk Sugarcane
Harvester
Gao YingjieHebei Key Laboratory of
Heavy Machinery Fluid Power Transmission and Control,
Yanshan University
China
110 34-052 0825-036
Unmanned Aerial Vehicle-based remote sensing system for soybean high-throughput
phenotyping
Liujun Li China
111 34-053 0825-037
Using Interception of Photosynthetically Active
Radiation to Assess Dormant Pruning Severity in A Planar
Sweet Cherry Orchard
Jingjin ZhangCenter for Precision and Automated Agricultural
Systems, Washington State University
United States
112 34-054 0825-038A novel method for measuring the volume and surface area of
egg
Zhang WeizhengCollege of Biosystems
Engineering and Food Science, Zhejiang University
China
113 34-055 0825-039Design and Research of a Movable Soil Information
Platform
Ma YangCollege of Mechanical and
Electronic Engineering, Northwest A&F University
China
114 34-056 0825-040Navigation control algorithm
research about transplanter based on the feedback linearization
Bai XiapingKey laboratory of Industrial
Informatics, Shenyang Institute of Automation Chinese Academy of Sciences
China
115 34-057 0825-041Development of LIDAR based
Autonomous Navigation System for Combine Harvester
Zhao TengVehicle Robotics Laboratory,
Graduate School of Agriculture, Hokkaido
University
Japa
99
116 34-058 0526-024 Modeling of Heat Pump Assisted Heating-Drying System
Erkan DİKMENDept. of Energy Systems
Engineering, Fac. of Technology, Süleyman Demirel
Univ.
117 34-059 2014-0649
An instrument for determination of pesticide residues based on acetylcholinesterase biosensor
Guo ZhaoShandong University of
TechnologyChina
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
13:30-17:30
Topic (2) Cultivating Agricultural Machinery, it includes the major of tillage, sowing, transplanting and plant protection
No. Poster # Paper # Paper Titles Name & Institution Country
1 32-001 0509-014
Problem and Countermeasure Discussion of Mechanized Farming of Main Double
Cropping Grain Crop
Liu JiyuanShandong Academy of Agricultural Machinery
Sciences
Belgium
2 32-002 0509-023 Analysis of Mower Knife Wear Based on Reverse Engineering
Fu ZuoliChina Agricultural University China
3 32-003 0509-036
Study on Straw Movement in Straw-soil-rotary Blade System
with Simulation Based on Distinct Element Method
Fang HuiminDepartment of Engineering,
Nanjing Agricultural University
China
4 32-004 0509-042A Study on the Dynamic
Stability of Full Type Single Section Scissor Lift
Zhang WeiAirport College, Civil
Aviation University of ChinaChina
5 32-005 0509-050Volatilization and Coverage Study of Spray Liquid on
Different Property Crop Surfaces
Li HuiCollege of Engineering, China
Agricultural UniversityBelgium
6 32-006 0514-004
Effects of Different Type and Structural Parameters' Subsoiling
Shovels on Soil Physical Characteristic in China Northeast
Area
Liu JunanCollege of Engineering, China
Agricultural UniversityChina
7 32-007 0514-005
Effects of Different Subsoiling Shovels on Soil Physical
Characteristic in China Northeast Area
Liu JunanCollege of Engineering, China
Agricultural UniversityChina
100
8 32-008 0514-006Study on the Multi-plate’s
Vibration System of the Needle Plug Tray Planter
Du RenMechanical Engineering Department, North China
Institute of Airspace Engineering
China
9 32-009 0526-009Performance Values of a Disk Chipper During Working with Pomegranate Pruning Residues
Mete YigitAkdeniz University Faculty of Agriculture Department of Agricultural Machinery
Antalya
Turkey
10 32-010 2014-0067
Design on 2MBYZ-3/6 Self-propelled Mulch Precision
Seeder with Corn Seed Production
Liu LijingChinese Academy of
Agriculture Mechanization Sciences, Beijing, China
China
11 32-011 2014-00683D Reverse Engineering Study of Seed Tube Based on Geomagic
Spark
Liu LijingChinese Academy of
Agriculture Mechanization Sciences, Beijing, China
China
12 32-012 2014-0087Design and Experiment on Rot Quickly Deep Buried by The
Returning Device of Rice Stalk
Ge YiyuanCollege of Mechanical
Engineering, Jamusi University, Jamusi,
China
China
13 32-013 2014-0093Optimizing The Performance of Granular Fertilizer Spreader with
Cone Disk
Dong XiangqianCollege of Engineering,
China Agricultural University, Beijing, China
China
14 32-014 2014-0094Research and Development on Vibration Spacing Scarifier for
Meadow
Dong XiangqianCollege of Engineering,
China Agricultural University, Beijing, China
China
15 32-015 2014-0106Experimental Analysis and Research on Key Parts of
Removing Solid Ice and Snow
Li YaqinBiological and Agricultural
Engineering, Jilin University,Changchun,China
China
16 32-016 2014-0108Analysis on Formation Process
and Failure Mechanism of Compacted Snow
Li YaqinCollege of Mechanical Engineering, Jamusi
University, Jamusi, China
China
17 32-017 2014-0116 Advance Research of Tray Precision Sowing Equipment
Zhao ZhengbinModern Agricultural Equipment co., Ltd
China
18 32-018 2014-0125The Performance Detection of
Tray Precision Seeder Based on Machine Vision Technology
Zhao ZhengbinModern Agricultural
Equipment co., Ltd,Beijing 100083,China
China
101
19 32-019 2014-0154Experimental study on the filling performance of maize bowl-tray
precision seeder
Mao XinEngineering College,
Heilongjiang Bayi Agricultural University, Daqing 163319, China
China
20 32-020 2014-0157 Design and Test of The Device From Apple Seedling Root Soil
Li JianpingAgricultural University of
HebeiChina
21 32-021 2014-0163
Simulation and Experimental Study on Pulverizer Performance of Reversal Rotary Tiller Based
on Discrete Element Method
Xie ZhenfengJiangsu University China
22 32-022 2014-0208
Research Progress of Mechanized Strip Compound Planting System of Wheat-
maize-soybean
Wu WeixiongSouth China Agricultural
UniversityChina
23 32-023 2014-0225Fault Characteristics Analysis
of 2BFQ-6 Precision Planter for Rapeseed
Liao YitaoHuazhong Agricultural
UniversityChina
24 32-024 2014-0234Use of A Specifically Designed Information System to Manage
Agricultural Plastic Waste Fluxes
Evelia SchettiniUniversity of Bari Italy
25 32-025 2014-0237
Effects of Integrated Use of Organic Manure and Chemical Fertilizer on Yield, Quality of Tea and Soil Nutrient Content
Li PingpingJiangsu University China
26 32-026 2014-0238Carrot Cultivation and Situation of Mechanization Technology in
China and Abroad
Li KaifengChinese Academy of
Agricultural Mechanization Sciences Beijing, 100083,
China
China
27 32-027 2014-0328 Advanced Design of No-tillage Hill Seeder
Lin YuexiangQingdao Agricultural
UniversityChina
28 32-028 2014-0329
Design and Experiment of Combing Plate and Push Rod Combined Pneumatic Seed Metering Device for Rice
Zhai JianboHuazhong Agricultural
UniversityChina
29 32-029 2014-0360Parameters Study of Aluminum Alloy Roller Barrel by Friction
Stir Welding
Feng TiantaoShandong Agriculture
UniversityChina
30 32-030 2014-0416Design and Experiment on
Friction Wheel Transmission for No-till Planter
Jia HongleiJilin University China
102
31 32-031 2014-0419 Development of Lifting Platform for Orchards in Hill Area
Fan GuijuCollege of Mechanical and Electrical Engineering,Shandong Agricultural
University, Tai’an 271018, China
China
32 32-032 2014-0422
Agricultural Mechanical Components Research Based on Materials of Integrated Bionic
on Animal Scales
Qu WenjingJilin University China
33 32-033 2014-0423Design and Experiment on
Gear-tooth Rootstalk Cutting Mechanism of No-tillage Seeder
Jiang XinmingCollege of Biological and Agricultural Engineering,
Jilin University, Changchun 130022, China
China
34 32-034 2014-0424Theoretical Analysis and
Experimental Research on Elastic Press Wheel
Jia HongleiJilin University China
35 32-035 2014-0427 Effect of Subsoiling on Soil Water Content
Jia ZhuoJilin University China
36 32-036 2014-0431Orthogonal Experiment of Loss Sowing Alarm System Based on
Capacitive Sensor
Qi JiangtaoKey Laboratory of Bionic Engineering (Ministry of
Education), Jilin University, 130022 China
China
37 32-037 2014-0432 Optimization and Test of the Profiling Elastic Press Roller
Jia HongleiJilin University China
38 32-038 2014-0433 Experiment Research on FSB-1900 Pickup Baler
Jia HongleiJilin University China
39 32-039 2014-0434
Experiment on Working Performance of Variable Rate
Fertilizer and Subsoiling Machine
Jia HongleiKey Laboratory of Bionic Engineering, Ministry of
Education, Jilin University
China
40 32-040 2014-0435
A Study on Soybean Mechanical Precision Seedmeter in China Based on Analysis of Soybean Precision Seeding in the United
States
Jia HongleiJilin University China
41 32-041 2014-0440
Optimization Design and Experiment of Seed Eliminator
in A Centralized Pneumatic Metering Device for Maize
Qi BingChina Agricultural University, China
42 32-042 2014-0442Effect of Curing Time in Field
on Moisture Content and Mechanical Strength
Guan MengShenyang Agricultural
UniversityChina
103
43 32-043 2014-0450
Effects of Structural Parameters of Seed Tube and Working
Parameters of A Centralized Drum Planter on The Uniformity
of Seed Distribution
Yang LiCollege of Engineering, China
Agricultural UniversityChina
44 32-044 2014-0462Design and Experiment of
Combined Disc Air-assisted Orchard Sprayer
Zhou LiangfuNanjing Research Institute for Agricultural Mechanization
Ministry of Agriculture
China
45 32-045 2014-0489Design and Experimental
Research on the Film-covered-fertilizer transplater
Chi MingluCollege of Mechanical and
Electrical Engineering, Inner Mongolia Agricultural
University
China
46 32-046 2014-0493
Study and Experiment on Structure of Metering Hole of
Centralized Centrifugal Precision Metering Device for Rapeseed
Cao XiuyingHuazhong Agricultural
UniversityChina
47 32-047 2014-0496
Design and Experiment on Roots-soil Separating
Mechanism of Fibrous Root Crops
Wu TaoCollege of Engineering, South China Agricultural University
China
48 32-048 2014-0518
Structural Analysis and Experiment of A Transplanter
for Corn Seedlings Growing in Paper-tubes
Yang LiCollege of Engineering,
China Agricultural University, Beijing China
China
49 32-049 2014-0521
Design and Experiment of An Automated System for
Transplanting Potato Tissue Culture Seedlings
Yang LiCollege of Engineering,
China Agricultural University, Beijing China
China
50 32-050 2014-0527Design and Finite Element Analysis of A Wheel of The
Wheel Wake
Wang JunyueHohhot Branch of Chinese Agricultural Mechanization
Sciences, Hohhot, China
China
51 32-051 2014-0529The development of the small rotary electric ditching testing
machine
Zhou YangKey Laboratory of Key
Technology on Agricultural Machine and Equipment,
Ministry of Education, South China Agricultural University
China
52 32-052 2014-0537
Experimental Study on Characteristics of Plant
Morphological Parameters about Different Rape Varieties for
Transplanting
Liu MingfengCollege of Engineering, Huazhong Agricultural
University
China
53 32-053 2014-0590Non-Destructive Measurement
of Rice Biomass and a Prediction Model
Liu CuihongCollege of Engineering, Shenyang Agricultural
University
China
104
54 32-054 2014-0630Design and Experiment of 1KY-40 Hydraulic Drive Ditcher For
Farmland Conduit
Wu GuangweiNational Research Center
of Intelligent Equipment for Agriculture
China
55 32-055 2014-0638
Anti-attachment Function of Slippery Zones in Nepenthes Pitchers and Its Application in Biomimetic Developing
Agricultural Pest Trapping Plate
Wang LixinHebei University of Science
and TechnologyChina
56 32-056 2014-0658Development of A Dry Land
Automatic Transplanter for Plug Seedlings
Cui Wei China
57 32-057 2014-0661
Optimal Design and Simulation Analysis on a Sowing Depth
Control Unit for Corn Precision Planter
Zhang RuiChina Agricultural University China
58 32-058 2014-0665
Study on Seedling Seperation Device of Artemisia Arborescens Transplanter Based on Vibration
Mechanism
Ji WenfengHuazhong Agricultural
UniversityChina
59 32-059 2014-0677Research method on the
interaction between soil and tillage components
Ma XingShenyang Agricultural
UniversityChina
60 32-060 2014-0690Experimental Study on The
Characteristics of Solar Drying Bale
Du JianqiangChinese Academy of
Agricultural Mechanization Sciences
China
61 32-061 2014-0727Proposed Installation of A
Agroindustries Drying of Pink Pepper (Aroeira)
Ricardo Oliano de CarvalhoAgricultural Engineer, Federal
University of PelotasBrazil
62 32-062 2014-0728
Economic Feasibility of Strawberry Production in Semi-
hydroponic System and Agro Industry of Jelly on A Small
Propriety
Ricardo Oliano de CarvalhoAgricultural Engineer, Federal
University of PelotasBrazil
63 32-063 2014-0729 Hydroponic Lettuce Minimally Processed Production
Ricardo Oliano de CarvalhoAgricultural Engineer, Federal
University of PelotasBrazil
64 32-064 2014-0749Design of Scooping Plastic
Film Mulch Planter and Seeding Performance Test of Cotton
Liu FeiCollege Of Mechanical And Electrical Engineering,Inner
Mongolia Agricultural University
China
65 32-065 2014-0755Experimental Study of Inside-filling Air-blowing Precision
Seed Metering Device for Maize
Cui TaoDepartment of Engineering,
China Agricultural University China
105
66 32-066 2014-0766Combined Driving System
Design for Ultra Low Speed Working of Orchard Ditcher
Chai LifaCollege of Mechanical and
Electrical Engineering, Agricultural University of
Hebei
China
67 32-067 2014-0828 The CFD Simulation of Droplet Trajectory in Greenhouse
Wang JingxuDepartment of Engineering,
China Agricultural UniversityChina
68 32-068 2014-0845
Analysis of Causes on Growth Duration Prolonged with Machine Transplanting in
Double Cropping Late Rice
Shu ShifuInstitute of Agricultural
Engineering, Jiangxi Academy of Agricultural Sciences
China
69 32-069 2014-0884 Experimental Study on Material Characteristics of Rice Bud Seed
Zhang Shun,College of Engineering,
Huazhong Agricultural UniversityChina
70 32-070 2014-0910Status of Agricultural
Mechanization in Southwestern China : a Case
Chen JianCollege of Engineering
and Technology, Southwest University
China
71 32-071 2014-0913
Research on Movement and Simulation Platform of Wine Grape Vibration-separation
Mechanism
Yuan PanpanCollege of Mechanical and
Electrical Engineering, SHIHEZI University, Shihezi,
China
China
72 32-072 2014-0929 Study on Technology Integration for Corn Seed Scale Processing
Li YongleiInstitute of Agricultural
Products Processing Engineering, Chinese Academy
of Agricultural Engineering
China
73 32-073 2014-0932 Simulation of straw movement by the Distinct Element Method
Fang HuiminDepartment of Engineering,
Nanjing Agricultural University
China
74 32-074 2014-0943 Design and Test of Alfalfa Flattening Test Bench
Zhao JianzhuCollege of Engineering, China
Agricultural UniversityChina
75 32-075 2014-0945
Air Flow Field Analyse and Dynamic Research on Seeds Pick-up Process for A Level-
sucker Precision Seeder
Liu CailingCollege of Engineering, China
Agrilcutral UniversityChina
76 32-076 2014-0986Design and Study on Metering
Device of Pneumatic Grass Seeder
Zhai GaixiaHohhot Branch of Chinese Academy of Agricultural Mechanization Sciences
China
77 32-077 2014-0988Effects of the Tillage Systems in Wheat Cultivation on Soil CO2
Emission
Zeliha Bereket BARUTÇukurova University,
Faculty of Agriculture, Department of Agricultural
Machinery
Turkey
106
78 32-078 2014-1017Effects of Tillage Systems on
Energy Use for Wheat-Soybean rotation in Southern Turkey
Zeliha Bereket BARUTCukurova University, Faculty of Agriculture, Department of
Agricultural Machinery
Turkey
79 32-079 2014-1029
Stability and Reliability Analysis of Valve Controlled Hydraulic
Motor Power System for Flexible Chassis for Pesticide
Sprayer
Zhang HuaCollege of Mechanical and
Electronic Engineering, Nanjing Forestry University
China
80 32-080 2014-1036Design and Experiment of No-till Wheat Seeder under Controlled
Traffic Farming System
Wang QingjieCollege of Engineer; China
Agricultural UniversityChina
81 32-081 2014-1113Effect of Moisture Content on Molding of Vegetable Nutrient
Nursery Block
Song YuqiuCollege of Engineering, Shenyang Agricultural
University
China
82 32-082 2014-1144Prespects of Creating a
Biopesticide Based on Bacillus Bacteria and Plant Extracts
Olga ShemshuraInstitute of Microbiology
and Virology, Committee of Science, Ministry of Science
and Education
Russia
83 32-083 2014-1172Design and Experiment of
Precision Suction Plate Metering Device for Super Hybrid Rice
Hu JianpingKey Laboratory of Modern Agricultural Equipment and
Technology, Ministry of Education&Jiangsu Province,
Jiangsu University
China
84 32-084 2014-1199Modal Analysis and Test of
Returning Machine Knife Roll Based on Pro/E and ABAQUS
Ge YiyuanCollege of Mechanical
Engineering,Jamusi University
China
85 32-085 2014-1201
Construction of Dynamic Ion Flux Detecting Device in Plants
Based on 3D Micro-imaging Method
Hou PeichenBeijing Research Center for Information Technology in
Agriculture
China
86 32-086 2014-1213The Design and Experimental Study of Self-driven Stubble
Ploughing Machine
Hu JunDepartment of
Engineering,Heilongjiang BA YI Agricultural University
China
87 32-087 2014-1214 Finite Element Analysis and Improvement of Subsoiler
Hu JunDepartment of
Engineering,Heilongjiang BA YI Agricultural University
China
88 32-088 2014-1243 Study on Crank Rocker Type Plastic Film Collecting Machine
Hou ShulinCollege of Engineer,China
Agricultural UniversityChina
107
89 32-089 2014-1279
Mechanism Analysis and Motion Simulation of Vegetable
Transplanter with Planetary Bevel Gear Train
Wang Yongwei,School of Biosystems Engineering and Food
Science, Zhejiang University
China
90 32-090 2014-1340Research on the Microstructure
and Properties of Laser Cladding SiC/Ni Coating
Xu YangCollege of Engineer; China
Agricultural UniversityChina
91 32-091 2014-1379
The Research of Common Mountain Orchard Transport Test System Construction on
Experiment Platform
Li ShanjunCollege of Engineering, Huazhong Agricultural
University
China
92 32-092 2014-1441
Design and Testing of 2BFD-2 type Peanut Planter Combined
with Laying Drip Irrigation Pipe and Plastic Mulch
Wang RuiliCollege of Engineering, Shenyang Agricultural
University, Liaoning, China
China
93 32-093 2014-1471The Progress and Key Technical
Analysis of Corn No-tillage Planter
Lin Jingcollege of engineering, Shenyang agricultural
university
China
94 32-094 2014-1504
The Experimental Research and Analysis of the Seed- Meter
Device of the Precision Spaced Planter for Corn
Wang DongweiMenoble co.ltd, Beijing China
95 32-095 2014-1536
Flow Field Simulation Analysis of Side Positive Pressure
Seeding Mechanism and Study on Working Parameters
Zhang DongxingCollege of Engineering, China
Agricultural UniversityChina
96 32-096 2014-1603 Straw Returning Rotary Tiller for Wet Land and Dry Land
Zhang JuminCollege of Engineering, Huazhong Agricultural
University
China
97 32-097 2014-0933
Application of Reaction Nitrogen Arc Cladding TiCN/Fe Metal
Ceramic Composite Coating for Cutter of Agricultural Machinery
Li JianchangDepartment of Mechanical and Electrical Engineering, Agricultural University of
Hebei
China
98 32-098 2014-1140
Study on the Interactions of Spring-Tooth and Plastic
Films Based on Physical and Mechanical Properties of plastic
film
Xie JianhuaChina Agricultural University China
99 32-099 2014-0235Design and optimization of straw-cleaning blade of no-
tillage seeder
Wu GuangweiNortheast Agricultural
UniversityChina
100 32-100 0526-011Wear resistance of ion
implanting tungsten carbide on 65Mn steel used as harrow disk
Yang HaiCollege of mechanical
and electrical engineering, Northeast Forestry University
China
108
101 32-101 0526-027
Application Status and Development Prospects of Effective Plant Protection
Machinery
Zhou HaiyanModern Agricultural Equipment CO.LTD
China
102 32-102 2014-0376Innovative Design and
Experimental Research on Self-suction Jet Aerator
Chen JiannengZhejiang Sci-Tech University China
103 32-103 2014-0472Motion Analysis and Simulation
Optimization of Rod Type Conveyor Based on Adams
Wang FangyanQingdao Agricultural
UniversityChina
104 32-104 2014-0505
Studied on the Automatically Catching Mechanism of
Potted-seedling for Vegetables Transplanter
Yang ChuanhuaChinese Academy of
Agricultural Mechanization Sciences
China
105 32-105 2014-0701
Based on Pro/E and ANSYS Workbench improvement after the deep loose plough shovel
force analysis
Wang ZiyangJiamusi University China
106 32-106 2014-0952Experimental study on mixing
performance of jet-mixing apparatus
Qiu BaijingInstitute of Agricultural
Engineering, Jiangsu University
China
107 32-107 2014-0693
Comparison Study of Application Effect on Three Rice Transplanters in Double
Cropping Rice Area
Xiao LipingJiangxi Agricultural
UniversityChina
108 32-108 2014-1438Experimental study on the
performance of different forms of seed corn seed
Sun ShimingHeilongjiang Provincial Academy of Agricultural Machinery Engineering
Science
China
109 32-109 2014-0339Research on tensile mechanical
properties of the greenhouse cucumber cane
Xu YunfengKey Laboratory of Modern
Agricultural Equipment and Technology, Ministry of Education and Jiangsu
Province,Institute of Agricultural Engineering ,
Jiangsu University
China
109
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION IV
ENERGY IN AGRICULTURE
110
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the Delegates
Access Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Presentation Location: 308,CNCC
15:00-15:15 Tea Break
15:15-17:15 Technical Presentation Location: 308,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical Oral Presentation
Sub-session I Location: 405,CNCC
Sub-session II Location: 406,CNCC
10:00-10:15 Tea Break
10:15-11:15 Technical Oral Presentation
Sub-session I Location: 405,CNCC
Sub-session II Location: 406,CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
Sub-session I Location: 405,CNCC
Sub-session II Location: 406,CNCC
15:00-15:15 Tea Break
15:15-16:30 Technical Oral Presentation
Sub-session I Location: 405,CNCC
Sub-session II Location: 406,CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
Thursday, Sept. 18
08:30-10:00 Technical Oral Presentation
Sub-session I Location: 405,CNCC
10:00-10:15 Tea Break
10:15-11:45 Technical Oral Presentation
Sub-session I Location: 405,CNCC
16:00-17:00 Closing Ceremony Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
Overview of Session IV: Energy in Agriculture
111
OPENING CEREMONY OF SESSION IV
ENERGY IN AGRICULTURE
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-17:15Location: Room 308, the 3rd Floor of CNCCChair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany
15:00-15:15 Tea BreakLocation: Room 308, the 3rd Floor of CNCCChair: Prof. Shulin Chen,
Time Paper # Technical Presentations
13:30-14:00 0826-401
Nutrient recovery for a new generation of anaerobic digestion technologies Dr. Shulin ChenProfessor of Department of Biological Systems Engineering, Department of Biological Systems Engineering Washington State University, USA
14:00-14:30 0826-403The potential economical competitiveness of diatom based Bio-Crude Dr. Jawkai WangPresident of Jawkai Bioengineering R&D Center, USA
14:30-15:00 0826-402Carbon capture and sequestration-A technology who's time has come? Prof. Bill A. StoutHonorary President of CIGR, USA
Time Paper # Technical Presentations
15:15-15:45 0826-404Renewable energies in agricultureProf. Axel MunackProfessor of Thuenen Institute of Agricultural, Germany
15:45-16:15 0826-405
Development of RCD protection technology of rural power network in ChinaProf. Songhuai DuDeputy-dean of Information and Electrical Engineering College, China Agricultural University, China
Professor of Department of Biological Systems Engineering, Department of Biological Systems Engineering, Washington State University, USA
112
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-11:30Session No. 1
Location: Room 405, the 4th Floor of CNCCChair: Prof. Guangnan Chen,
Time Paper # Technical Presentations
08:30-08:45 2014-0846
Microwave-assisted decarboxylation and cyclization of potassium stearate with magnalium hydrotalcite catalysts and renewable hydrocarbon fuel production Yuhuan Liu, Yingyu Liu, Yunpu Wang, Yingkuan Wang, Rongsheng RuanNanchang University, China
08:45-09:00 2014-0568
A review on the application of near-infrared spectroscopy to crop straw analysis Zengling Yang, Junjie Xue, Lujia HanChina Agricultural University, China
09:00-09:15 2014-0243
A solar absorption cooling system for greenhouse climate control: technical evaluationGiuliano VoxUniversity of Bari, Italy
09:15-09:30 2014-0252The structure changing of caragana microphyllain BiomassZebing XingShanxi Agriculture University, China
09:30-09:45 2014-0576
Effects of preheating temperature on the compacting characteristics of the pellets made from corn stalk powderXuewei Bai, Juan Liu, Yongkui LiShenyang Agricultural University, China
16:15-16:45 0826-406Green packaging materialsProf. Radhey LAL. Kushwaha, University of Saskatchewan, Canada
16:45-17:15 0826-407
The developing trend and application analysis of the stand-alone wind generatorProf. Qingzhi ZhaiDeputy Director of Electrical and Information Experiment Teaching Centre, China Agricultural University, China
Professor of National Centre for Engineering in Agriculture, University of Southern Queensland, Australia
113
10:00-10:15 Tea Break
Location: Room 405, the 4th Floor of CNCCChair: Prof. Giuliano Vox,
Time Paper # Technical Presentations
10:15-10:30 2014-0860
Process conditions optimization of soybean wastewater treatment and biomass recovery by yeastHaifeng LuChina Agricultural University, China
10:30-10:45 2014-0560
Application of tobacco stems briquetting in flue-cured tobacco: a case of China rural placeXinfeng Wang, Guichuan Xu, Bailiang Zhang, Yaosong Guan, Haifeng Lu, Baoming LiChina Agricultural University, China
10:45-11:00 2014-0071Benchmarking energy use in agriculture Prof. Guangnan ChenUniversity of Southern Queensland, Australia
11:00-11:15 2014-0174
Estimation of gross calorific value of rice straw from proximate and ultimate analysis using artificial neural Shaoping QianZhejiang University, China
11:15-11:30 2014-0552energy efficient rural food processing utilising enewable energy to improve livelihoodsAndrew Kallon
Time Paper # Technical Presentations
08:30-08:45 2014-1227
A novel three layers micro-grid cluster control system based on IEC61850 communication system Zhiyuan Sun, Tianjun Jing, Jiangbo Wang, Haijiang DuCollege of Information and Electrical engineering, China Agricultural University, China
08:45-09:00 2014-1014
Load curve analysis based on fuzzy clustering and fuzzy pattern recognition Bilin XiaoCollege of Information and Electrical Engineering, China Agricultural University, China
Session No. 2
Location: Room 406, the 4th Floor of CNCC Chair: Prof. Songhuai Du, Deputy-dean of Information and Electrical Engineering College,
China Agricultural University, China
Professor of Department of Agricultural and Environmental Science, Italy
114
10:00-10:15 Tea Break
Location: Room 406, the 4th Floor of CNCCChair: Prof. Wei Tang,
Time Paper # Technical Presentations
10:15-10:30 2014-1631
Effects of icing on aerodynamic performance of wind turbine blade by wind tunnel test and numerical simulationYan Li, Shaolong Wang, Jing Tang, Qindong Liu, Fang Feng Engineering College, Energy engineering, Northeast Agricultural University, China
10:45-11:00 2014-0323The off grid application of Chinese small wind generators Prof. Dechang ShengChinese Wind Energy Equipment Association, China
11:00-11:15 2014-1374
Research on solar energy absorption characteristics and optical mechanism of several kinds of butterfly Liyan WuShenyang Agricultural University, China
11:15-11:30 2014-1636Study on The Law of Flooding and Releasing Heat of Solar Heat Pipe Filled with Phase Change Materials (PCMs) in GreenhouseYong Wu
09:00-09:15 2014-1224
Based on state feedback and parameter self-tuning battery SOC algorithm researchZhi Wang, Yunfeng Tang, Jinfang HuCollege of Information and Electrical engineering, China Agricultural University, China
09:15-09:30 2014-1274
The optimal allocation of distribution generations in micro-grid based on the economic and environmental evaluationDechang Yang, Cong Wu, Xin MaCollege of Information and Electrical Engineering, China Agricultural University, China
09:30-09:45 2014-0647
Flow field simulation and structure optimization of concentrated wind energy turbineDe Tian, Xiaoe Mao, Ying Deng, Bochao Sang, Junjie LinNorth China Electric Power University, China
09:45-10:00 2014-1510
Transformation a biogas mixture into biomethane by the absorption tower of CO2 Shimizu NaotoHokkaido University, Japan
Professor of College of Information and Electrical Engineering, China Agricultural University, China
115
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-16:30
Session No. 1
Location: Room 405, the 4th Floor of CNCCChair: Mustafa A. M., Zhejiang University, China
Time Paper # Technical Presentations
13:30-13:45 0618-078
Renewable energy effect on sustainable development of the food industry Gerasimos MartzopoulosAristotle University of Thessaloniki, Greece
13:45-14:00 2014-1132
Experiment on influencing factors of cutting performance of cotton stalk cutting knifeZhanhua Song, Fade LiShandong Agricultural University, China
14:00-14:15 2014-0072Alternative energy sources for cotton production in AustraliaGuangnan Chen, University of Southern Queensland, Australia
14:15-14:30 0509-010
Evaluation of the vulnerability and economic feasibility of electric vehicle charging infrastructures based on gas stations in Korean rural areasSolhee KimSeoul National University, Korea
14:30-14:45 2014-0853
Study on analysis methods for fermentable sugar in sweet sorghum stalksGuifang Fan, Yan Jiang, Weiliang Xu, Peipei Li, Shizhong Li Tsinghua University, China
15:00-15:15 Tea Break
Location: Room 405, the 4th Floor of CNCCChair: Guifang Fan, Engineer of Tsinghua University, China
Time Paper # Technical Presentations
15:15-15:30 2014-0447
Fungal pretreatment of rice straw for enhancing biogas production from solid-state anaerobic digestionMustafa A. M., Kuichuan ShengZhejiang University, China
116
Session No. 2
Location: Room 406, the 4th Floor of CNCCChair: Cengiz Akdeniz,
15:30-15:45 2014-0804Effects of trace metal elements on dry anaerobic fermentation of corn stalkLing ZhaoShenyang Agricultural University, China
15:45-16:00 2014-1585
Performance analysis of a solar thermal heat pump system for biogas digester heating Huixian Shi, Xingjian SunModern Agricultural Science and Engineering Institute, Tongji University, China
16:00-16:15 2014-0221Biocatalysts in biogas processes for higher resource and energy efficiency Ulrike Schimpf, Ronald Schulz, Alexander SchraderInstitute of Agricultural and Urban Ecological, Germany
16:15-16:30 2014-0341Development of biodegradable biomass board using rice stalkXiulun Wang, Jin Zhang, Koji Kito, Takaaki SuzukiMie University, Japan
Time Paper # Technical Presentations
13:30-13:45 2014-0047
Alcohols as a means to inhibit the formation of precipitates in blends of biodiesel and fossil diesel fuel Axel MunackThünen Institute of Agricultural Technology, Braunschweig, Germany
13:45-14:00 2014-1142Advances in comprehensive utilization of algae residuesSha Li, Guochen Zhang, Xiuchen LiDalian Ocean University, Chian
14:00-14:15 0514-013
Biodiesel production from waste cooking oil in Mongolian conditionBolor-ErdeneMaster student School of Engineering, Mongolian State University of Agriculture, Mongolia
14:15-14:30 2014-0760
Conversion of enteromorpha prolifera to bio-crude oil through hydrothermal liquefactionJianwen LuLaboratory of Environment-Enhancing Energy (E2E), College of Water Resources and Civil Engineering China Agricultural University, China
14:30-14:45 2014-0780
Biochemical analysis of university kitchen waste and its potential for sustainable bio-crude oil conversion through hydrothermal liquefactionZhi QuLaboratory of Environment-Enhancing Energy(E2E), College of Water Resources and Civil Engineering China Agricultural University, China
Department of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey
117
15:00-15:15 Tea Break
Location: Room 406, the 4th Floor of CNCCChair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany
Time Paper # Technical Presentations
15:15-15:30 2014-0867
Harvesting reducing sugars and organic acids from xylan and cellulose through hydrothermal liquefactionZhangbing ZhuLaboratory of Environment-Enhancing Energy (E2E), and Key Laboratory of Agricultural Engineering in Structure and Environment, Ministry of Agriculture, College of Water Resources and Civil Engineering, China Agricultural University
15:30-15:45 2014-1136
Detection in situ of pigments in microalgae using Vis/NIR spectroscopy and chemometricsPan JianCollege of Biosystems Engineering and Food Science, Zhejiang University, China
15:45-16:00 0512-004
The effect of die dimension and die speed on olive cake pelletizing Cengiz AkdenizDepartment of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey
16:00-16:15 2014-0671A research on briquetting of greenhouse pepper crop residuesSefai Bilgin, Hasan YILMAZ, Abdülkadir KOÇERFaculty of Agriculture, University of Akdeniz, Turkey
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-11:45Location: Room 405, the 4th Floor of CNCCChair: Haifeng Lu, China Agricultural University, China
Time Paper # Technical Presentations
08:30-08:45 2014-1428Design of agitating charring kiln for biomass Baofeng Zhang, Mingjin Xin, Wentao Ren, Jun MengCollege of Engineering Shenyang Agricultural University, China
08:45-09:00 2014-0107Design and experiment of integration grinder with draw out the device Mingyou WangNanjing Agricultural Machinery Research Institute, China
09:00-09:15 2014-0589
Design of domestic photovoltaic cell tracking device and its application in electric heating systemLidi WangShenyang Agricultural University, China
118
10:00-10:15 Tea Break
Location: Room 405, the 4th Floor of CNCCChair: Prof. Dechang Sheng,
Time Paper # Technical Presentations
10:15-10:30 2014-0862
Natural light-microaerobic condition for PSB wastewater treatment and biomass resource recovery technologyHaifeng LuCollege of Water Resource and Civil Engineering, China Agriculture University, China
10:30-10:45 2014-1350
Carbon-rich substrates for boosting manure-biogas: a consequential life cycle assessmentLorie Hamelin, Irina Naroznova, HenrikDepartment of Chemical Engineering, Biotechnology and Environmental Technology, University of Southern Denmark, Denmark
10:45-11:00 0523-015
Preliminary evaluation of Chlorella vulgaris cultivation using hydrothermal liquefaction wastewater Guoyang YuanCollege of Water Resource and Civil Engineering, China Agriculture University, China
11:00-11:15 2014-0390
Quantitative characterization of gas emissions during rape straw firing using TG-DSC-MS technology Qiulin Ma, Lujia Han, Guangqun Huang, China Agricultural University, China
11:15-11:30 2014-1100
Pyrolysis characteristic of pine nut shell and its activated carbon preparationGang Wang, Enchen Jiang, Mingfeng Wang, Dongdong Shi, Qian Ma, Min Ye, Xinhui Guo, Shijun Zhang, Shibo LiCollege of engineering, South China Agricultural University, China
11:30-11:45 2014-0478
Study on the products distribution and properties of product wood vinegar of pine nut shell continuous pyrolysisEnchen Jiang, Chenxi Zhao, Liyuan Qin, Aihui ChenNortheast Agricultural University, China
09:15-09:30 2014-0598A study of straw pot decomposition in soilJiapei Zha, De GaoNingbo institute of Technology, Zhejiang University, China
09:30-09:45 2014-0982
Screening of high efficient cellulose-degrading microorganisms and construction of microbial community for digestion residue aerobic compostingQiaoyin ZhuNortheast Agricultural University, China
Professor of Chinese Wind Energy Equipment Association, China
119
SESSION IV
POSTER SESSIONS
SEPTEMBER 16, TUESDAY
13:30 - 17:00
Topic (1) Material pretreatment and energy comprehensive research
No. Poster # Paper # Paper Titles Name & Institution Country
86 41-001 0506-001Effects of Different Mixed Ratio of Maize Straw and
Crop Straw on Silage Quality
Ren HaiweiWestern China Energy &
Environment Research Center, Lanzhou University of
Technology
China
87 41-002 0506-002Effect of Different Additives
on The Silage Quality of Corn Stover and Lettuce Leaves
Ren HaiweiWestern China Energy &
Environment Research Center, Lanzhou University of
Technology
China
88 41-003 2014-0062 Effect of Drilling Quality on Biomass Yield
Maga JurajDepartment of Machines and
Production Systems, Faculty of Engineering, Slovak University
of Agriculture in Nitra
Slovakia
89 41-004 2014-0179 Transport Efficiency of Straw For Energy Utilization
Krocko VladimirSlovak University of Agriculture in
NitraSlovakia
90 41-005 2014-0461
A Novel Dynamic Modulate and Optimal Control Scheme
for a Tidal Current Energy Converter
Zhang HuidiZhejiang University China
91 41-006 2014-0548
Evaluation on Different Modes of Rural Energy Project for Large-scale Crop Residues
Utilization in China
Ai PingThe College of Engineering,
Huazhong Agricultural University, Wuhan
430070,China
China
92 41-007 2014-0691 Research on Ice-melting Method of Line Carrying Load
Wang ShuwenNortheast Agriculture University China
93 41-008 2014-1388
Preparation of Xylooligosaccharides
Producing Solid Waste based Biodegradable Seedling Pots
Si WeiweiChinese Academy of
Agricultural Mechanization Sciences
China
120
94 41-009 2014-0709Effect of Moisture Content
and Particle Size on Friction Characteristics of Barley Meal
Peng FeiCollege of Engineering,China
Agriculture UniversityChina
95 41-010 2014-0928
Synthesis and Characterization of Starch-based Cationic
Flocculants for Harvesting Microalgae
Cheng YanlingBeijing Union University China
96 41-011 2014-0640 Study on the mode of straw supply in the energy utilization
Huo LiliChinese Academy of
Agricultural EngineeringChina
Topic (2) Biomass energy utilization
No. Poster # Paper # Paper Titles Name & Institution Country
97 42-001 0506-003
Optimizing Dilute-acid Hydrolysis (DACH) of
Distillers Grains and Ethanol Fermentation
Ren HaiweiWestern China Energy &
Environment Research Center, Lanzhou University of
Technology
China
98 42-002 0509-029
Optimizing Dilute-acid Hydrolysis (DACH)of
Distillers Grains and Ethanol Fermentation
Pei FangxiaWestern China Energy &
Environment Research Center, Lanzhou University of
Technology
China
99 42-003 2014-0025Design and Experiment on Biomass Pellet Densifying
Machine for Residue
Wang MingyouNanjing Research
Institute of Agricultural Mechanization,Ministry of
Agriculture
China
100 42-004 2014-0151
The concept of small biogas-plants – An evaluation of
efficiency, economic feasibility and strategic fit to livestock
farms
Frauke P. C. MüllerUniversity of Bonn Germany
101 42-005 2014-0354
Study of the Influence Mechanism of the Supernatant
Recycling on a Two-phase Anaerobic Fermentation Producing H2 and CH4
Wang YuanyuanHuazhong Agriculture
UniversityChina
102 42-006 2014-0429Experimental Study on Dense Performance of Straw Annular
Mould Forming Fuel
Yi WenyuSichuan Research & Design
Institute of Agricultural Machinery
China
103 42-007 2014-1153
Wet Semi-continuous Anaerobic Methane
Fermentation of Food Waste Fed with High Solids Content of Feedstock for Saving Water
Wang MingEngineering College of Northeast Agricultural
University, Harbin 150030
China
121
104 42-008 2014-0571Research Progress of
Compressing Technology on Alfalfa
Guo LeiCollege of Engineering, China
Agricultural University, Beijing, China
China
Topic (3) Compost
Topic (4) Pyrolysis
No. Poster # Paper # Paper Titles Name & Institution Country
105 43-001 0514-007
Energetic Efficiency of the Composting Process of the
Head Cabbage Waste Mixed with Wheat Straw and Spent
Coffee Grounds in Dependence on the Additives Structure
Solowiej PiotrDepartment of Technical
Sciences, University of Warmia and Mazury
Poland
106 43-002 2014-0207
Effects of Mixture Ratio of Cow Manure and Greenhouse
Wastes on Anaerobic Co-digestion Process
Osman YALDIZAkdeniz University Turkey
107 43-003 2014-0611
The Effects of The Proportion of Mushroom Residue and Swine Manure on The Temporal and Spatial Characteristics of The
Aerobic Fermentation Temperature under Forced Ventilation
Zhang JunfengWuhan Institute of Agricultural
Mechanization ScienceChina
108 43-004 2014-1442Effects of Adding Urea and
Inorganic Salts Soil on Straw Anaerobic Digestion
Duan NaCollege of Water Resources & Civil Engineering, China
Agricultural University
China
No. Poster # Paper # Paper Titles Name & Institution Country
109 44-001 0618-081 Energetic Use of Solid Products of Pyrolysis Technology
Pavel KicFaculty of Engineering, Czech University of Life Sciences,
Prague
Czech Republic
110 44-002 2014-0577Pyrolysis Characteristics
of Cattle Manure Based on Components
Xin YaDepartment of Engineering, Agricultural energy Branch,
Huazhong Agriculture University, Wuhan, China
China
111 44-003 2014-0775
Fuel Gas From Rice Husk Via Microwave-assisted Pryolysis:
Catalysts to Improve Gas Products
Wang YunpuNanchang University, State Key Laboratory of Food Science and Technology, Nanchang 330047,
China
China
112 44-004 2014-1223
Research on Carbonization Experiment of Korshinsk Peashrub and Analysis on
Carbonizing Heat
Sun FengkunCollege of Engineering,Shanxi
Agricultural UniversityChina
122
Topic (5) Combustion and emissions
Topic (6) The solar wind geothermal energy and etc.
No. Poster # Paper # Paper Titles Name & Institution Country
113 45-001 2014-0045Analysis of the Environmental Effects of the Burning of the Straw for Energy Purposes
Macak MiroslavDepartment of Machines and
Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra,
Slovakia
Slovakia
114 45-002 2014-0770Design and Application of High Efficiency Low Tar
Biomass Gasifier
Wang YunpuNanchang University, State Key Laboratory of Food Science and Technology, Nanchang 330047,
China
China
115 45-003 2014-1246Straw Mixed Combustion Characteristics and Kinetic
Analysis
Hou ShulinCollege of Engineer,China
Agricultural UniversityChina
No. Poster # Paper # Paper Titles Name & Institution Country
116 46-001 2014-0147 Using Ground Water Heat Pumps to Heat Rearing Barns
Hannah LicharzInstitute of Agricultural
Engineering, University of Bonn
Germany
117 46-002 2014-0985Distributed solar photovoltaic
(pv) grid power generation system
Zhang ChuanyangShandong Agricultural
University TaianChina
118 46-003 2014-1068 Dynamic Model Of Solar Phovotolatic Systems
Enkhbayar GonchigdorjIrkutsk State Academy of Agriculture Department of
Physics and Electrical
Mongolia
119 46-004 2014-1264Technical Status and
Development of the Small Wind Power System in China
Zhai QingzhiCollege of Information and
Electrical Engineering,China Agricultural University
China
120 46-005 2014-1272Status Monitoring of Wind Power Generation System
Based on DC Bus
Chen LongCollege of Information and
Electrical Engineering, China Agricultural University
China
121 46-006 2014-1307Thermal analysis of new
designed solar air heaters for drying purposes
Nuri CaglayanDepartment of Farm
Machinery, Faculty of Agricultural Engineering,
Akdeniz University
Turkey
123
Topic (7) Others
122 46-007 2014-1321The Design of Automatic
Monitoring and Controling System
Liu XiaoliDepartment of Cartography and Geography Information System,China Agricultural
University
China
123 46-008 2014-1369Adjustable Switch Control
Circuit for Piezoelectric Generation
Du SonghuaiCollege of Information and
Electrical Engineering, China Agricultural University
China
124 46-009 2014-1448 Research of MPPT Control Based on LS-SVM
Cai JiheSchool of Electrical and Electrical Engineering, Changzhou Institute of
Technology
China
125 46-010 2014-1490Research on Control Strategy for Direct Drive Wind Power
System
Tang WeiCollege of Information and
Electrical Engineering , China Agricultural University
China
126 46-011 2014-0365 THE QUIK DEVELOPMENT OF CHINESE WIND FARMS
Shen DechangChinese wind energy equipment
associationChina
No. Poster # Paper # Paper Titles Name & Institution Country
127 47-001 2014-0101Animal Behavior in A Fully Automatically Controlled
Dairy Farm
Anja GraeffTechnische Universitt München,
Center of Life and Food Sciences, Agricultural
Systems Engineering, Am Staudengarten2, D-85354 Freising-Weihenstephan,
Germany
Germany
128 47-002 2014-1301
Study on Total Factor Energy Efficiency Based on DEA of Agricultural Machinery
Industry
He QiongCollege of engineering, China
Agricultural UniversityChina
129 47-003 2014-1570Preparation and
Characterization of Cotton Stalk-plastic Film Composites
Xia NanCollege of Food Science and Engineering, Northwest A&F
University
China
124
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION V
DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM MANAGEMENT
125
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the Delegates Access
Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 301A+B,CNCC
15:00-15:15 Tea Break
15:15-17:40 Keynote Speeches Location: 301A+B,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical
Oral Presentation
2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technical and
Economic Analysis Location: 403,CNCC
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
10:00-10:15 Tea Break10:15-11:45 Technical
Oral Presentation
3. Full Mechanization of Field Crop Production Patterns and Approaches
Location: 403,CNCC
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical
Oral Presentation
4. Agriculture and Agricultural Mechanization Technical and Economic Analysis; Logistics
Design and Management; Development Strategy and
Mechanism Innovation Location: 403,CNCC
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
15:00-15:15 Tea Break
15:15-17:00 Technical
Oral Presentation
5. Agricultural Engineering Education and Extension Training; Agricultural Systems Engineering
and Management Location: 403,CNCC
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
Overview of Session V: Development Strategy, Ergonomics and System Management
126
Thursday, Sept. 18
08:30-10:00 Technical
Oral Presentation
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
10:00-10:15 Tea Break
10:15-12:00 Technical
Oral Presentation
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical
Oral Presentation
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
15:00-15:15 Tea Break
15:15-15:30 Technical
Oral Presentation
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM)
Location: 301A+B,CNCC
16:00-17:00 Closing Ceremony Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
127
OPENING CEREMONY OF SESSION V
DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM
MANAGEMENT
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-17:40 Location: Room 301A-301B, the 3rd Floor of CNCCChair: Prof. Minli Yang,
Opening Speeches
13:30-13:35 Dr. Claus Grøn Sørensen
13:35-13:40 Mr. Min LiuVice President of Chinese Society for Agricultural Machinery, Director of China Agricultural Machinery Testing Center, MOA, China
13:40-13:45 Dr. Ravi Ratnayake,
Technical Presentation
1. Keynote presentations
Location: Room 301A-301B, the 3rd Floor of CNCC
Chair: Dr. Elisabeth Quendler, Department of Sustainable Agricultural Systems, University of Natural Resources and Life, Austria
Time Paper # Technical Presentations
13:45-14:10 0826-501Agricultural mechanization/engineering and food securityProf. Bill A. StoutHonorary President of CIGR, USA
14:10-14:35 0826-502
The development of agricultural operations management Dr. Claus Grøn SørensenDepartment of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark
Executive Deputy Director of China Research Center for Agricultural
Mechanization Development, China Agricultural University, China
Chair of Section V on System Management of CIGR; Department of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark
Director, Trade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific (UNESCAP)
128
14:35-15:00 0826-503
Agricultural mechanization strategies for sustainable production intensification – concepts and cases from Africa and AsiaDr. Josef KienzleAgro-Industry Officer, Infrastructure and Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO
15:00-15:15 Tea Break
Location: Room 301A-301B, the 3rd Floor of CNCC
Chairs:
Location: Room 301A-301B, the 3rd Floor of CNCCChairs:
Prof. Ladislav Nozdrovicky,Vice-Dean for International Relations Faculty of Engineering, Slovak University of Agriculture in Nitra, Slovak Republic
Prof. Jin Tong, College of Biological and Agricultural Engineering, Jilin University,
Changchun, Jilin, China
Time Paper # Technical Presentations
15:15-15:35 0826-504
Agro-value chain analysis and development Dr. Namal SamarakoonIndustrial Development Officer, Agri-Business Development Branch, UNIDO Headquarters
15:35-15:55 0826-505
Locally relevant and globally preeminent agricultural and biological engineeringProf. K.C. TingHead of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA
15:55-16:15 0826-506The Role of International Standards in Enhancing Safety in AgricultureDr. Michael RyanHead of the OECD Codes & Schemes
16:15-16:35 0826-507
Testing networks’ role in improving the ergonomics, safety and quality-whole system management of farm machines Mr. Sandro LiberatoriDirector General, ENAMA/ENTAM, Rome, Italy
Time Paper # Technical Presentations
16:35-16:55 0826-508India’s new sub-mission on agricultural mechanizationMs. Rani KumudiniJoint Secretary of the Indian Ministry of Agriculture, India
16:55-17:15 0826-509
The Development and Policy of Agricultural Mechanization in China Prof. Minli YangExecutive Deputy Director of China Research Center for Agricultural Mechanization Development, China Agricultural University, China
17:15~17:35 0826-510
Prospect for Regional Cooperation in Sustainable Agricultural MechanizationMr. Bing ZhaoHead of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM)
17:35-17:40 Summary
129
10:00-10:15 Tea Break
Time Paper # Technical Presentations
08:30-08:45 2014-0216Accident at work with fertilizer spreaders in Austrian agriculture Dr. Elisabeth Quendler, Department of Sustainable Agricultural Systems, University of Natural Resources and Life, Austria
08:45-09:00 2014-0836
Cognitive ergonomics of agricultural vehicles: mental workload assessment in multiple information presentation environmentXiaoping JinChina Agricultural University, China
09:00-09:15 2014-1252
Analysis of the dynamic characteristic of a transmission gear with high contact ratioChangran HeBeijing Information Science and Technology University, China
09:15-09:30 2014-0051
Evaluation of greenhouse microclimate performance under arid conditions utilizing wireless sensor networksProf. Moustafa FadelDepartment of Aridland Agriculture, College of Food and Agriculture, United Arab Emirates University, UAE
09:30-09:45 2014-1408
The parametric design of agricultural machinery cab modeling based on the analysis of ergonomics dataSha LiuAssociate Professor of College of Engineering, China Agricultural University
09:45-10:00 2014-1425Causal influence of farm machinery purchase policy to food production Dr. Changfeng Jiao College of Economics and Management, China Agricultural University,China
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:00
2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technicaland Economic Analysis
Location: Room 403, the 4th Floor of CNCC
Chair: Prof. Yinsheng Yang, Dean of College of Biological and Agricultural Engineering,
Jilin University, Changchun, Jilin, China
130
3. Full Mechanization of Field Crop Production Patterns and Approaches
Location: Room 403, the 4th Floor of CNCCChair: Prof. Marcelo Dodson, College of Business Administration, Argosy University, Brazil
Time Paper # Technical Presentations
10:15-10:30 2014-0490
Study on the comprehensive evaluation of corn planting patterns in the central area of Jilin province based on the household investigationWei LinChina Agricultural University, China
10:30-10:45 2014-0785A model for carbon footprint of agriculture mechanization: LCA case study of maize production in northeast ChinaHainaWang, Jilin University, China
10:45-11:00 2014-0109
The evaluated rice mechanization in the selected area of Thailand: Nakronrachasima provincePhakwipha SutthiwareePh.D Student, College of Engineering, China Agricultural University, China
11:00-11:15 2014-1628
Agricultural mechanization production systems and case analysis based on combination of machinery and agronomyDr. Yuxiang HuangNorthwest A&F University, China
11:15-11:30 2014-0833
The contribution of irrigation and other factors to grain yield growth in China between 1978 and 2011Yong Wu China Agricultural University, China
11:30-12:00 Free speech
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-16:30
4. Agriculture and Agricultural Mechanization Technical and Economic Analysis;Logistics Design and Management; Development Strategy and Mechanism Innovation
Location: Room 403, the 4th Floor of CNCCChair: Dr. Changfeng Jiao, College of Economics and Management, China Agricultural
University, China
131
Time Paper # Technical Presentations
13:30-13:45 2014-1472 Earned value management: the soybean harvesting case studyProf. Marcelo DodsonCollege of Business Administration, Argosy University, Brazil
13:45-14:00 2014-1461On cost issues of freshwater live fish circulation in China Prof. Xiaohong LeeCollege of Economics and Management, China Agricultural University,China
14:00-14:15 2014-1616Study on evolution mechanism of pig-breeding industry chain in ChinaWenhai WangChina Agricultural University, China
14:15-14:30 2014-0203
Simulation of Agricultural Logistic Processes with K-Nearest Neighbors AlgorithmProf. Heinz BernhardtRuhr-Universität Bochum, Germany
14:30-14:45 2014-0110
Agricultural mechanization policy of Thailand and China focus on rice production Phakwipha SutthiwareePh.D Student, College of Engineering, China Agricultural University, China
14:15-15:00 Free speech
Time Paper # Technical Presentations
15:15-15:30 2014-0413
Personnel training: the comparison of modes and implications for agricultural engineering discipline in ChinaLijuan ShiPh.D Student, College of Engineering, China Agricultural University, China
15:30-15:45 2014-0868The design of two-axis attitude control system Chao MaPh.D Student, China Agricultural University, China
15:45-16:00 0618-043Field trials effectiveness analysis of rice factory seeding technology Lina Zhang Ph.D Student, College of Engineering, China Agricultural University, China
16:00-16:30 Free speech
15:00-15:15 Tea Break
5. Agricultural Engineering Education and Extension Training; Agricultural SystemsEngineering and Management
Location: Room 403, the 4th Floor of CNCC
Chairs: Prof. Ladislav Nozdrovicky, Vice-Dean for International Relations Faculty of Engineering,Slovak University of Agriculture in Nitra, Slovak Republic
132
1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK
FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM)
SEPTEMBER 17, 2014
WEDNESDAY
09:00-18:00Location: 09:00-09:30 Chairs:
09:30-10:00
10:00-10:30
10:30-10:45 10:45-12:00
12:00-13:30
13:30-15:30
15:30-15:45
15:45-16:45
Head of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM)
Room 301A+B, the 3rd Floor of CNCCOpening of the 1st Annual Meeting of ANTAMMr. Bing Zhao,
Welcoming remarks by Mr. Min Liu, Director of China Agricultural Machinery Testing Centre (CAMTC)Opening remarks by Dr. Ravi Ratnayake, Director of Trade and Investment Division,ESCAPKeynote speechesRepresentative of the Ministry of Agriculture of ChinaMs. Rani Kumudini, Joint Secretary, Indian Ministry of Agriculture (TBC)
Tea Break (Group Photo)
Agenda Item 1 Election of Chair and adoption of agendaAgenda Item 2Country reviews(Countries by alphabetical order, 10 mins for each country review)
Lunch Break
Agenda Item 3Country reviewsJoint presentation by consultants of CSAM on testing of agricultural machinery and agricultural mechanization in the Asia-Pacific (20 mins)
Tea Break
Agenda Item 4 Recap on ANTAM by CSAMOperational structure of ANTAMAgenda Item 4.1: Review of the ToRAgenda Item 4.2: Functions and responsibilities of the Lead Testing Stations/Focal Points
133
1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK
FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM)
SEPTEMBER 18, 2014
THURSDAY
09:00-17:30
1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK
FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM)
SEPTEMBER 19, 2014
FRIDAY
09:00 TECHNICAL TOUR TO CAMTC
Location: 09:00-10:30 10:30-10:45
10:45-11:45 11:45-12:00 15:30-15:45
13:30-15:30 15:30 17:30
16:45-17:00 17:00-18:00
Agenda Item 4.3: Functions and composition of the Technical Working Group (TWG)Agenda Item 4.4: Financial and administrative issues
Agenda Item 5Election of Chair, Vice Chair and Lead Focal Station/Focal Point for 2014-2015Agenda Item 6Work plan of ANTAM for 2014-15
Room 301A+B, the 3rd Floor of CNCC Agenda Item 7Relationship/partnership with major stakeholdersPresentations by OECD, FAO, UNIDO and ENTAMModalities of partnership/collaboration
Tea Break
Agenda Item 8Proposal for consideration: simplified testing methodology for knapsack sprayersWrap-up and closing
Tea Break
Continued discussion and closingTechnical tour to China Agricultural UniversityDinner hosted by CAMTC
134
SESSION V
POSTER SESSIONS
SEPTEMBER 16, WEDNESDAY
13:30 - 17:00
Topic (4) Agriculture and agricultural mechanization technical and economic analysis
No. Poster # Paper # Paper Titles Name & Institution Country
130 54-001 2014-0144Digital Information System to Support Area of Agricultural
Machines
Ricardo de arvalhoInstituto Federal Sul Rio
Grandense
131 54-002 2014-0481
Research on the Influence of Montanic Fragmental Farmland
on the Work Efficiency of Walking Transplanter
Chen CongNanjing Research Institute for Agricultural Ministry of
Agriculture
China
132 54-003 2014-0634
An Extended TPB Model in Consumers’ Intention to Purchase Agricultural
Machinery: An Empirical Study
Lv FengJilin University China
133 54-004 2014-0656
Application Prospect of Beidou Navigation Satellite System to Monitor the Pollution of
Agriculture Soils with Heavy Metals
Guo HongpengJilin University China
134 54-005 2014-0767Development of Wireless
Remote Control System for Greenhouse Ventilation
Liu WeiCollege of Engineering,
Electromechanical Branch, China Agricultural University,
Beijing, China
China
135 54-006 2014-0835
Research on Remote Wireless Control System of The Opening Degree of Thermal Blanket on
Greenhouse Base on Wi-Fi
Cheng ZhihuaDepartment of Mechatronic
Engineering, China Agricultural University
China
136 54-007 2014-0872A Model Construction Method of Large Combine Harvester
Chassis Frame Flatness
Wu ZhidanCollege of Engineering,
Electromechanical Branch, China Agricultural University
China
135
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
08:30 - 12:00Topic (4) Agriculture and agricultural mechanization technical and economic analysis
Topic (3) Detection and safe agricultural production
137 54-008 2014-1101Study on Evaluation System of Agricultural Construction
Project in China
Liu YangChinese Academy of
Agricultural EngineeringChina
138 54-009 2014-1216
Evaluation of the Technical and Economical Effects of the
Using of Machinery System for Processing of Straw for Energy
Purposes
Nozdrovicky LadislavDepartment of Machines and Production Systems, Faculty
of Engineering, Slovak University of Agriculture in
Nitra
Slovakia
No. Poster # Paper # Paper Titles Name & Institution Country
118 51-001 0618-068Review on Research of
Urban Low-carbon Transport Development Strategy
Chen YuexiaSchool of Automobile and
Traffic Engineering, Jiangsu University, Zhenjiang 212013
China
119 51-002 2014-0396
Research Status and Suggestions on Engineering Mode of Major
Food Crops Mechanized Production in China
Huang GuangqunChina Agricultural University China
120 51-003 2014-0494
The Production Mode Transformation Ways and
Countermeasure Research of China Rape
Li ZhaodongHuazhong Agriculture
UniversityChina
121 51-004 2014-0987Construction of Agricultural
Standardization Development Paths Based on Systems Science
Li JiyueInstitute of Agricultural engineering standards &
norms, Chinese Academy of Agricultural Engineering
China
No. Poster # Paper # Paper Title Name & Institution Country
122 53-001 2014-1475Study on Behavior of Pig-
Breeding Farmers in Controlling Pig Quality and Safety
Wang HongliCollege of Biological and
Agricultural Engineering, Jilin University
China
136
Topic (5) Logistics Design and Management
No. Poster # Paper # Paper Titles Name & Institution Country
123 55-001 2014-0368
Status Analysis of Chinese Famous-region Herbal Medicine
Planting Base and Building of Materialized and Closed
Management Mode-An Empirical Analysis Based on Infinitus (China)
Co., Ltd. Supplier
. Zhao ZusongyingCollege of Engineering,
China Agricultural University, Beijing, China;
China
124 55-002 2014-1117
The Applicable Engineering Modes for The Small Wholesale Market of Melons and Vegetables in Hainan
Production Base
Sun JingInstitute of Agro-Products Processing Engineering,
Chinese academy of Agricultural Engineering
China
125 55-003 2014-1437
Research on Total Quality Management System in
Heilongjiang Agricultural Autumn Soil Preparation Project
Li GuolinHeilongjiang Institute of Agricultural Mechanical
Engineering Science
China
126 55-004 2014-1509
A Cooperative Game Analysis of Member Interests in The
Agricultural Supply Chain by Farmer Cooperatives Association
Participated
Li ChongCollege of Biological and Agricultural Engineering,
Jilin University
China
Topic (3) Detection and safe agricultural production
No. Poster # Paper # Paper Title Name & Institution Country
127 56-001 2014-1503Zeng De-chao and China’s Agricultural Engineering
Education
Feng MinThe Institute of Agricultural History, China Agricultural
University
China
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
13:30 - 17:00Topic (2) Full mechanization of field crop production patterns and approaches
No. Poster # Paper # Paper Titles Name & Institution Country
110 52-001 0618-042Comparative Study on the Land-scale Management Pattern Based
on Game Theory in Yushu
Dou BingzhengCollege of engineering, China
Agricultural UniversityChina
111 52-002 0618-044Study on Efficiency of Wheat-
rice Double Cropping Mechanical Production Pattern in Jiangsu Province
Cao WeihuaCollege of Engineering,
China Agricultural UniversityChina
137
112 52-003 0618-045
Spatial Distribution Optimization Study of the Engineering Pattern
of Paddy Rice Mechanized Production in Southern Double Rice Cropping Region in China
Yang MinliCollege of Engineering,
China Agricultural University, Beijing, China
China
113 52-004 0618-046
Study on the Effecting Factors of Agricultural Machinery and
Equipment of Paddy Mechanized Production in Liyang
Yang MinliCollege of Engineering, China
Agricultural UniversityChina
114 52-005 0618-047
Study on the Model of Employing Service Through Bidding in Agricultural Machinery
Operation----Taking BoXin Company as a Case
Yang MinliCollege of engineering, China
Agricultural University, Beijing, China
China
115 52-006 2014-0826
The Investigation and Analysis of Sugarcane Mechanization
Harvesting in Zhanjiang State Farm
Liu HaochunKey laboratory of Key
Technology on Agricultural Machine and Equipment
(South China Agricultural University), Ministry of
Education
China
116 52-007 2014-0848Extensible Evaluation Model for The Selection of Ridging
Machinery
Zhang WeipengCollege of Engineering, China
Agricultural UniversityChina
117 52-008 2014-0980
Study on the Development of the Technology Extension System
of Agricultural Mechanization in China
Li AnningCenter for Agriculture
Mechanization Technology Development & Extension
China
118 52-009 2014-0984
Study of Agricultural Mechanization Technology
Extension in Chongqing City Based on the SWOT Theory
Ao FangyuanChongqing agricultural
mechanization technology extension station
China
119 52-010 2014-1155
Situation, Problems and Countermeasures of Vegetable
Traceability System in China: A Survey of Vegetable Production Base and Processing Enterprises
in Beijing and Shandong Province
Tang JinCollege of Biological and
Agricultural Engineering, Jilin University
China
120 52-011 2014-1538Analysis of Sugarcane
Mechanized Harvesting Environment System
Wei QiaoCollege of Engineering, China
Agricultural UniversityChina
121 52-012 2014-1429Design of the full hydraulic
driving high frame field operation vehicle
Qin WeihuaCollege of Mechanical and
Electrical Engineering, Henan Agricultural University
China
122 52-013 2014-1361 Design of full hydraulic driving field elevated operating machine
Qin WeihuaCollege of Mechanical and
Electrical Engineering, Henan Agricultural University
China
138
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION VI
POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERING
139
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the Delegates Access
Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC
15:00-15:15 Tea Break
15:15-17:45 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical Oral Presentation
1. Advanced Food Processing Technologies
Location: 401,CNCC
Special Session Research and
Development of Plant Resources
Location: 402A,CNCC
4. Drying & Bio-processing Technology Location: 402B,CNCC
10:00-10:15 Tea Break
10:15-12:15 Technical Oral Presentation
1. Advanced Food Processing Technologies
Location: 401,CNCC
Special Session Research and
Development of Plant Resources
Location: 402A,CNCC
4. Drying & Bio-processing Technology Location: 402B,CNCC
12:15-13:30 Lunch Location: Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
2. Postharvest Handling and Management
Location: 401,CNCC
3. Functional Foods Processing Technology
and Evaluation Location: 402A,CNCC
Executive Board Meeting of Packaging and Food
Engineering Branch of Chinese
Mechanical Engineering Society (CMES)
Location: 402B,CNCC15:00-15:15 Tea Break
15:15-17:00 Technical Oral Presentation
2. Postharvest Handling and Management
Location: 401,CNCC
3. Functional Foods Processing Technology
and Evaluation Location: 402A,CNCC
Executive Board Meeting of Packaging and Food
Engineering Branch of Chinese
Mechanical Engineering Society (CMES)
Location: 402B,CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
Overview of Session VI: Postharvest Technology and Process Engineering
140
Thursday, Sept. 18
08:30-10:00 Technical Oral Presentation
5. Nondestructive Measurements &
Biosensors Location: 401,CNCC
7. Quality Measurement, Modeling and Control(1)
Location: 402A,CNCC
9. Quality Measurement, Modeling and Control(3)
Location: 402B,CNCC
10:00-10:15 Tea Break
10:15-12:30 Technical Oral Presentation
5. Nondestructive Measurements &
Biosensors Location: 401,CNCC
7. Quality Measurement, Modeling and Control(1)
Location: 402A,CNCC
10. Packaging and Storage Technology
Location: 402B,CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
6. Imaging and Image Processing
Location: 401,CNCC
8. Quality Measurement, Modeling and Control(2)
Location: 402A,CNCC15:00-15:15 Tea Break
15:15-16:00 Technical Oral Presentation
6. Imaging and Image Processing
Location: 401,CNCC
8. Quality Measurement, Modeling and Control(2)
Location: 402A,CNCC
16:00-17:00 Closing Ceremony Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
141
OPENING CEREMONY OF SESSION VI
POSTHARVEST TECHNOLOGY
AND PROCESS ENGINEERING
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-14:00
Location: Room 310, the 3rd Floor of CNCCChair: Prof. Jerzy Weres, Professor of Poznan University of Life Sciences, Poland
13:30-13:35 Address by Prof. Da-Wen SUN,
13:35-13:45 Address by Prof. LI Shujun, the Vice Chair of Technical Section VI, CIGR13:45-13:55 Address by Dr. Amauri Rosenthal,
13:55-14:00 Close of the Opening Ceremony
Location: Room 310, the 3rd floor of CNCCChairs: Prof. Mingyong Xie, Vice President and professor of Nanchang University, China Prof. Prof. Jose M. Aguilera, Former President of CONICYT, Chile
Time Paper # Technical Presentations
14:00-14:30 0826-601
Recent developments in hyperspectral imaging for quality and safety evaluation of agricultural and food productsProf. Da-Wen SUNCIGR President, Member of Royal Irish Academy, Member of Academia Europaea, Ireland
14:30-15:00 0826-602Science and technology for food innovationProf. Jose M. AguileraFormer President of CONICYT, Chile
PLENARY KEYNOTE PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
14:00-17:15
the Honorary Chair of Technical Section VI, CIGR, the President of CIGR
EMBRAPA Food Technology Rio de Janeiro, Secretary of Technical Section VI, CIGR
142
15:00-15:15 Tea Break
Time Paper # Technical Presentations
15:15-15:45 0826-603
Applications of radio frequency heating for postharvest pest control in agricultural products Prof. Shaojin WangProfessor of Northwest A&F University, China
15:45-16:15 0512-003
The latest functional developments and applications of bio-based materials to food packaging in Japan Prof. Toshinori KimuraFormer Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan
16:15-16:45 0826-605
Nondestructive detection technology and equipment for meat quality and safety Prof. Yankun PengProfessor of China Agricultural University, China
16:45-17:15 0826-607Study on the structure and bioactivity of polysaccharides from food resourcesProf. Mingyong XieVice President and professor of Nanchang University, China
1. Advanced Food Processing Technologies
Time: 08:30-10:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Yankun Peng, Professor of China Agricultural University Prof. Can Ertekin,
ORAL PRESENTATIONS
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:15
Time Paper # Technical Presentations
08:30-08:45 2014-1424
Optimization of lentinan extraction from Lentinusedodes stems with ultra high pressure by quadratic rotation-orthogonal composite experimental designJirui DuCollege of Biosystems Engineering and Food Science, Zhejiang University, China
08:45-09:00 0509-035Design and development of biomechatronic productsShujun ZhangUniversity of Gloucestershire, UK
Head of Department of Agricultural Machinery, Akdeniz University, TURKEY
143
10:00-10:15 Tea Break
Time: 10:15-12:15Location: Room 401, the 4th floor of CNCCModerators: Prof. Lanfang Zhang,
Prof. LAL.Kushwaha, University of Saskatchewan, Canada
Time Paper # Technical Presentations
10:15-10:30 2014-0741
Design and realization of a flow balance control system for buckwheat hulling processShaozhong LvCollege of Mechanical and Electrical Engineering, China
10:30-10:45 2014-0670
The effect of a photoperiodic green light program during incubation on embryo development and hatch processQin TongRoyal Veterinary College, UK
10:45-11:00 2014-1238
Synergistic effect of pulsed electric field and ultrasound on sterilization of yellow rice wineChenang LvCollege of Biosystems Engineering and Food Science, Zhejiang University, China
11:00-11:15 2014-1619
Control special mechanical energy output by adjusting screw configuration during soybean protein extrusion texturizationYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences(CAAS), China
09:00-09:15 2014-1273
Simulation and experiment of the motion characters in twin-screw extruder based on SolidworksLixue ZhuZhongkai University of Agriculture and Engineering, China
09:15-09:30 2014-0355
Enhancement of biogas production from greenhouse wastes by pre-treatment and co-digestionNuriye Altinay PerendeciDepartment of Environmental Engineering, Engineering Faculty, Akdeniz University, Antalya, Turkey
09:30-09:45 0509-014
Problem and countermeasure discussion of mechanized farming of main double cropping grain cropJiyuan LiuShandong Academy of Agricultural Machinery Sciences, China
09:45-10:00 2014-1267Development a method to manufacture fermented beef jerkyLonghao YuHeilongjiang Bayi Agricultural University, China
Chinese Academy of Agricultual Mechanizartion Sciences (CAAMS), China
144
11:15-11:30 0508-007
Elimination of certain foodborne pathogens in peach juice by the combination of ultra sonication and eau de roseŞeyma AydınAbantIzzet BAYSAL University, Turkey
11:30-11:45 2014-0178Safety evaluation of cadmium and its effects on lipid metabolismYanle YuZhejiang Gongshang University, China
11:45-12:00 2014-0254
The influence of environmental electromagnetic field on electric parameter selection of fruit and vegetable preprocessed by high-voltage pulsed electric fieldFeiyu MaEngineering College of Shanxi Agricultural University, China
12:00-12:15 0618-036
Design and experiment of SBJ20 automatic potato cake molding machineJiangtao HeChinese Academy of Agricultural Mechanization Sciences, China
Time: 08:30-11:45Location: Room 402A, the 4th floor of CNCCModerator: Prof. Mark L. Wahlqvist, Fuli Institute of Food Science, Zhejiang University, China
SPECIAL SESSION
RESEARCH AND DEVELOPMENT OF PLANT RESOURCES
Time Paper # Technical Presentations
08:30-09:00 0526-032
Development of innovative nano (micro)-encapsulation process for health-promoting components in functional foodsProf. John ShiGuelph Food Research Center , Agriculture and Agri‐Food Canada, Canada
09:00-09:30 0826-608
The research and database development for Chinese features resources phytochemicalsProf. Donghong LiuExecutive Director of Fuli Institute of Food Science, Zhejiang University, China
09:30-10:00 0526-031
Development of plant resources: hydrolysis of cassava into glucose sweetenerProf. Arthur A. TeixeiraFuli Institute of Food Science, Zhejiang University, China
10:00-10:15 Tea Break
145
Time Paper # Technical Presentations
10:15-10:45 0826-609Functionalities of Chinese traditional fermented soy productsProf. Yongqiang ChengChina Agricultural University, China
10:45-11:00 2014-0694
The advances and challenges of impingement technology in agricultural products processing-a reviewHongwei XiaoChina Agricultural University, China
11:00-11:15 2014-0100
Development of a bush mango (IrvingiaGabonensis) nutcrackerAkindele Folarin ALONGEDepartment of Agricultural and Food Engineering Faculty of Engineering, University of Uyo, Nigeria
11:15-11:30 2014-0618Study on production and technology of potato hash brownsYang YangChinese Academy of Agricultural Mechanization Sciences, China
11:30-11:45 2014-1444Kinetics of peanut protein extracted by AOT reverse micelleChenxian YangHenan University of Technology, China
2. Drying & Bio-processing Technology
Time: 08:30-10:00Location: Room 402B, the 4th floor of CNCCModerators: Prof. Toshinori Kimura,
Prof. Yongqiang Cheng, Professor of China Agricultural University, China
Time Paper # Technical Presentations
08:30-08:45 0508-027
Microwave-vacuum drying characteristics and quality of scallop adductor muscleGuochen ZhangDalian Ocean University, China
08:45-09:00 2014-0309
Analysis on the quality of the dehydrated ginger slices dried by hot air and microwave fluidizationWeiqiao LvChinese Academy of Agricultural Mechanization Sciences, China
09:00-09:15 2014-0476
Numerical simulation on superheated steam fluidized bed drying at different operating pressuresZhifeng XiaoJingdezhen Ceramic Institute, China
former Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan
146
09:15-09:30 2014-0325
Mathematical modeling and experimental investigation of drying behavior of green peas in an infrared-assisted hot air dryerDariush ZareAssociate Prof., Biosystems Engineering Dept., Shiraz University, Shiraz, Iran
09:30-09:45 2014-0340
The technology research of wireless real-time monitoring fruit and vegetables’ moisture during freeze-dryingHeling ZhangCollege of Engineering , Shanxi Agricultural University, China
09:45-10:00 2014-0698
Study of correlations between the dielectric properties measured by coaxial probe technique and drying characteristics of fruits and vegetablesXinhui WuCollege of Engineering, Shanxi Agricultural University, China
10:00-10:15 Tea Break
Time: 10:15-12:30Location: Room 402B, the 4th floor of CNCCModerators: Prof. Umezuruike Linus Opara,
Prof. Yongqiang Cheng, Professor of China Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-1323
Simulation and validation of a suitable model for thin layer drying of ginger Rhizomes in an induced draft dryerAbhijit BorahDepartment of Agricultural Engineering, Assam Agricultural University1, Assam, India
10:30-10:45 2014-0789
Study of carrot dry-blanching and dehydration using sequential infrared radiation heating and hot air dryingBengang WuJiangsu University, China
10:45-11:00 2014-0319
Optimization, evaluation and quality assessment of drying process of a spherical product in a hot air infrared assisted vibratory bed dryer case study: green peaDariush ZareAssociate Prof of Biosystems Engineering Dept., Shiraz University, Shiraz, Iran
11:00-11:15 2014-1074
Study on the dry processing parameters and its model for Chinese dried noodleYimin WeiInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China
11:15-11:30 0509-012
Effect of airflow rate and air temperature of flash dryer with horizontal spinner on drying of okaraJoko Nugroho Wahyu KaryadiGadjah Mada University, Indonesia
Chair of Technical Section VI, CIGR, Distinguished Prof. &DST/NRF South African Research
147
11:30-11:45 2014-1394
The effects of protective carriers on the inactivation kinetics of lactic acid bacteria during convective droplet dryingNan FuSoochow University, China
11:45-12:00 2014-1632
Study on electrical properties of soymilk based on AC impedance methodHuanlu SongCollege of Mechanical and Electronic Engineering, Shandong Agricultural University, China
12:00-12:30 0509-052Application of 2DCOS-NIR on identifying meat and bone mealChengxu LvChina Agricultural University, China
3. Postharvest Handling and Management
Time: 13:30-15:00Location: Room 401, the 4th floor of CNCC Moderator: Prof. Shaojin Wang, Professor of Northwest A&F University, China
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-17:00
Time Paper # Technical Presentations
13:30-13:45 0826-606
Beyond production: Harnessing technological innovations in postharvest science and engineering to realize the African agriculture transformation agenda Prof. Umezuruike Linus OparaChair of Technical Section VI, CIGR, Distinguished Professor &DST/NRF South African Research, South Africa
13:45-14:00 2014-1344
Study on storability of plums of different cultivars at low temperature and their evaluation based on principal component analysisJiao WangChina Agricultural University, China
14:00-14:15 0508-017
Study on the physicochemical properties of the pork cooked by microwave ovenZhong HanSouth China University of Technology, China
14:15-14:30 2014-0276
Changes in the physicochemical properties and microstructures of frozen pork dumpling filler caused by temperature and duration of storageBaohua KongNortheast Agricultural University, China
148
14:30-14:45 0509-011
Thermal insulation of a flour mill to improve effectiveness of the heat treatment for insect pest controlPorto S.M.CUniversity of Catania, Italy
14:45-15:00 2014-0229Radio frequency treatments for disinfesting chestnutsShaojin WangProfessor of Northwest A&F University, China
15:00-15:15 Tea Break
Time: 15:15-17:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Peter Schulze Lammers,
Prof. Mingyong Xie, Vice President and professor of Nanchang University, China
Time Paper # Technical Presentations
15:15-15:30 2014-0230Design and experiment of rotary banana carpopodium cutting machineZhengbo ZhuSouth China Agricultural University, China
15:30-15:45 2014-1366
Review on morphological defense changes of sub- and ultra-structure of fruit cell against postharvest infections by fungal pathogens and exogenous regulation involvedShuzhi YuanChina Agricultural University, China
15:45-16:00 0618-031
Rapid and non-invasive determination of K value for evaluation of fish freshness by hyperspectral imaging techniqueJunhu ChengSouth China University of Technology, China
16:00-16:15 0514-008Development of on-line apple bruise detection systemYichich Chiu, National Ilan University, Chinese Taipei
16:15-16:30 2014-1621A new kind of walnut comprehensive utilizationShuzhen HuChinese Academy of Agricultural Mechanization Sciences, China
16:30-16:45 2014-1257
Effects of vacuum-infiltrating treatment with yeast mannan on maintaining storage quality and suppression of postharvest disease of tomato fruitFang XieChina Agricultural University, China
16:45-17:00 2014-1358
The application on the fruit grading of the Kinect systemGaofeng ZhouCollege of Biosystems Engineering and Food Science, Zhejiang University, China
Department of Agricultural Engineering, University of Bonn, Germany
149
4. Functional Foods Processing Technology and Evaluation
Time: 13:30-15:00Location: Room 402A, the 4th floor of CNCCModerator: Prof. Haile Ma,
15:00-15:15 Tea Break
13:30-17:00 Executive Board Meeting of Packaging and Food Engineering Branch of Chinese Mechanical Engineering Society (CMES) Location: Room 402B, the 4th floor of CNCC
Time Paper # Technical Presentations
13:30-13:45 2014-0532
The effect of different strains fermentation on the content of soybean oligosaccharides in DouchiJin GanChina Agricultural University, China
13:45-14:00 2014-0733
Ultrasonic enhanced crude intracellular polysaccharide fermentation of Phellinus Igniarius and its antioxidant activities in vitroHenan ZhangJiangsu University, China
14:00-14:15 2014-0849
Antioxidant properties of a unique LAB culture isolated from Harbin dry sausageQian ChenNortheast Agricultural University, China
14:15-14:30 2014-1215
Multivariate analysis of precooling treatment on fruit quality and reactive oxygen species of apricot fruitJian LiBeijing Technology and Business University, China
14:30-14:45 2014-1462
Antibacterial performance of nisin and chitosan nanoparticles and their characterization after incorporation into zein-based edible packagingYanru GuoShanghai Ocean University, China
14:45-15:00 2014-1611
The influence of cultivating conditions on the production of mycelium and triterpenoids of Antrodiacinnamomea CCRC 35396 in submerged culturesWeiwei WangJiangsu University, China
Dean of School of Food and Biological Engineering, Jiangsu University, China
150
5. Nondestructive Measurements & Biosensors
Time: 08:30-10:00Location: Room 401, the 4th floor of CNCCModerators: Dr. Amauri Rosenthal, EMBRAPA Food Technology Rio de Janeiro, Brazil Prof. Yimin Wei,
10:00-10:15 Tea Break
Time: 10:15-12:30Location: Room 401, the 4th floor of CNCC
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-12:30
Time Paper # Technical Presentations
08:30-08:45 2014-0105
Non-destructive detection of specific spoilage bacteria growth and sensory change on chilled pork surface by Vis/NIR spectroscopyLeilei ZhangChina Agricultural University, China
08:45-09:00 0519-007Sixty egg hairline crack detection system for grading table eggsKurt C. LawrenceU.S. Department of Agriculture, USA
09:00-09:15 2014-1005
The research of fresh meat moisture detection method by NIRJianxu Wang College of Information and Electrical Engineering, ChinaAgricultural University, China
09:15-09:30 2014-1296
The analysis of glucose in commercially available papaya powder by infrared spectroscopyHong LiuHainan Normal University, China
09:30-09:45 2014-1370
New reference materials and automatic placing method for NIR application in fruit internal quality detectionLuyue ZhangZhejiang University, China
09:45-10:00 2014-1473
The assessment of the moisture content of walnut based on near-infrared hyperspectral technologyJiyu PengCollege of Biosystems Engineering and Food Science, Zhejiang University, China
Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China
151
Moderators: Prof. Vilas M. Salokhe,
Prof. Kang Tu, Prof. of Nanjing Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-1483
Characterizing pear tissue with optical absorption and scattering coefficientsDong HuCollege of Biosystems Engineering and Food Science, Zhejiang University, China
10:30-10:45 2014-1505
Distinguish of different kinds of meat using VIS/NIR spectroscopyHui Guo College of Mechanical and Traffic, Xinjiang AgriculturalUniversity, China
10:45-11:00 0509-054
Rapidly quantitative determination of soluble solids in bottled vinegar based on NIRS and PLS methodShangshan YanShanxi Agricultural University, China
11:00-11:15 2014-0859
Acetylcholinesterase biosensor based on multiwall carbon nanotubes-SnO2-chitosan nanocompositeXia SunShangdong University of Technology, China
11:15-11:30 2014-0893
Electronic nose and GC-MS application for early detection and classication of pathogens in strawberry fruitKang TuNanjing Agricultural University, China
11:30-11:45 2014-1020
On eggshell cracks detection method based on a magnetostrictive transducerWei LuNanjing Agricultural University, China
11:45-12:00 2014-1063
Research on multi-channel ultrasonic eggshell thickness measurement system based on wavelet transform modulus maximaHanchi ZhangChina Agricultural University, China
12:00-12:15 2014-1135
Using independent components analysis combined with genetic algorithm to mine the feature signals of electronic nose in honey nectar detectionPolin ShiSub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China
12:15-12:30 2014-1297
Determination of trace elements in Synsepalumdulcificum leaf by inductively coupled plasma mass spectrometryHong LiuHainan Normal University, China
President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India
152
6. Quality Measurement, Modeling and Control (1)
Time: 08:30-10:00Location: Room 402A, the 4th floor of CNCCModerators: Prof. Gajendra Singh, Professor of Indian Agricultural research Institute (IARI), India Prof. Donghong Liu,
10:00-10:15 Tea Break
Time: 10:15-12:00Location: Room 402A, the 4th Floor of CNCCModerator: Prof. Zhongli Pan, Professor of University of California, Davis, USA
Time Paper # Technical Presentations
08:30-08:45 2014-0480
Effects of ultrasound treatment on spoilage microorganisms, quality and antioxidant capacity of cherry tomatoes during storageDonghong LiuFuli Institute of Food Science, Zhejiang University, China
08:45-09:00 2014-0586
Prediction of the intercellular space volume of citrus by physical measurementsAndi DirpanDepartment of Biomechanical System, Agriculture Faculty, EHIME University, Ehime, Japan
09:00-09:15 2014-0719
Comparison of content of phenol, tannin, and polyphenol oxidase in ten varieties banana (Musa L.var AAA) during different ripen stagesFen LiaoInstitute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, China
09:15-09:30 2014-1280
Effect of cassava flour substitution in extruded fish feed on its heat pump drying and microscopyDr. Folasayo Titilola FAYOSETshwane University of Technology, Pretoria, South Africa
09:30-09:45 2014-0127
Pork sarcoplasmic protein hydrolysis and flavor development induced by a unique LAB culture isolated from Harbin dry sausageQian ChenNortheast Agricultural University, China
09:45-10:00 2014-1624
Effect of trans-glutaminase and glycerol on the properties of fish skin gelatin filmsShuzhan WangHenan University of Technology, China
Executive Director of Fuli Institute of Food Science, Zhejiang University, China
153
7. Quality Measurement, Modeling and Control (2)
Time: 08:30-09:30Location: Room 402B, the 4th floor of CNCCModerator: Prof. Cristina Ratti,
Time Paper # Technical Presentations
10:15-10:30 2014-1427
The Effect of modified buckwheat flour on viscosity properties of wheat flour and sensory qualities of noodlesYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China
10:30-10:45 2014-1103
Discrimination and prediction of strawberry juice quality based on electronic tongueShanshan QiuCollege of Biosystems Engineering and Food Science, Zhejiang University, China
10:45-11:00 2014-0838
Mathematical modelling of microwave, combined microwave-convective and convective drying parameters of pumpkinSevil KaraaslanUniversity of Suleyman Demirel, Faculty of Agriculture, Department of Agricultural Machinery, 32260 Isparta, Turkey
11:00-11:15 2014-1426
Effects of vacuum mixing, water addition, and mixing time on the quality of fresh Chinese white noodlesRui LiuInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China
11:15-11:30 2014-0820
The Influence of different mechanical treatments on the nutritional value of corn kernelsShifang WangShanxi Agricultural University, Taigu County, China
11:30-11:45 0509-007
Comparison and evaluation of flavor characteristics between wild and pond-reared Chinese mitten crab (Eriocheirsinensis)Shuai WangShanghai Ocean University, China
11:45-12:00 2014-0145
Thermal analysis of comparative study of a new model for greenhouse tobacco dryingRicardo Oliano de CarvalhoFederal University of Pelotas, Brazil
Time Paper # Technical Presentations
08:30-08:45 2014-0040An appraisal of studies on food extrusionKehinde A. AdekolaJilin University, China
Professor - Food Engineering SGA - FSAA Université Laval Québec, Canada
154
08:45-09:00 2014-1353
Effects of plant and microbial proteases on the quality of hot-boned beef topsidesAladin BekhitUniversity of Otago, New Zealand
09:00-09:15 2014-0866
Modeling study of the temperature relation between the retort and cold spotJianwei ZhouZhejiang University, China
09:15-09:30 2014-1134
Evaluation of natural hog casings modified by surfactant solutions combined with lactic acid by response surface methodology and sausage performance stuffed in modified casing during immersion vacuum coolingChaohui FengUniversity College Dublin, Ireland
10:00-10:15 Tea Break
8. Packaging and Storage Technology
Time: 10:15-11:30Location: Room 402B, the 4th floor of CNCCModerator: Prof. Xiaobo Zou,
Time Paper # Technical Presentations
10:15-10:30 2014-1031
Analyses on thermal and mechanical properties of the vertical sealing roller in the four column quadrilateral sealing packing machineProf. Chuanmin YangTianjin University of Commerce, China
10:30-10:45 2014-1609
Renewable cold energy use for brown rice storage and rough rice storage in JapanShuso KawamuraHokkaido University, Japan
10:45-11:00 2014-1229
Effect of different storage temperature on respiration rate and marketable quality of sweet cornSheng LiuBeijing Vegetable Research Center, Beijing Academy ofAgriculture and Forestry Sciences, China
11:00-11:15 2014-0236
Effect of thermal and storage treatments on walnut paste quality associated with enzyme inactivationProf. Shaojin WangProfessor of Northwest A&F University, China
11:15-11:30 2014-1258
Effects of ascorbic acid-combined solution dipping on browning and quality of fresh-cut apple fruit pieces during storageHanxu PanChina Agricultural University, China
Prof. of School of Food & Biological Engineering, Jiangsu University, China
155
15:00-15:15 Tea Break
9. Quality Measurement, Modeling and Control (3)
Time: 13:30-16:00Location: Room 402A, the 4th floor of CNCCModerators: Dr. Peeyush Soni, Asian Institute of Technology, Thailand Prof. Baohua Kong, Northeast Agricultural University, China
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-16:00
Time Paper # Technical Presentations
13:30-13:45 2014-1487
The study of honey nectar source characterization pattern of based on differences in Aroma characteristicBolin ShiSub-Institute of Food and Agriculture, China NationalInstitute of Standardization, China
13:45-14:00 2014-1530Analysis and evaluation of Kiwifruit qualityLongsheng FuNorthwest A&F University, China
14:00-14:15 2014-1352
Optimization of cyanogens detoxification of flaxseed meal using a central composite design (CCD)Aladin BekhitFood Science Department, University of Otago, Dunedin, New Zealand;
14:15-14:30 2014-1436
Relationships between the thermal properties of raw materials and the textural properties of extruded texturized soybean proteinYingquan ZhangInstitute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China
14:30-14:45 2014-0180
Model-based research for the risk and prediction of silage bale deterioration suffered from aerobic impactKerstin Helena JungbluthInstitute of Agricultural Engineering, Germany
14:45-15:00 2014-1479
Effects of glycan parts on the enzymatic coagulation of soybean proteinsGuangzhong LuanCollege of Food Science and Engineering of Northwest A&F University, China
156
Time Paper # Technical Presentations
15:15-15:30 2014-0321
The antioxidant capacity of Maillard reaction products formed by a porcine plasma protein hydrolysate-sugar model system as related to chemical characteristicsQian Liu, Northeast Agricultural University, ChinaNortheast Agricultural University, China
15:30-15:45 0506-005
Feasibility study on classifying different kinds of Chinese tea using Terahertz spectroscopyBin LiBeijing Research Center for Information Technology inAgriculture, China
15:45-16:00 2014-0210
Physical properties of rough, brown and white rice of Japonica, Indica and NERICA typesEdenio Olivares DiazHokkaido University, Japan
10. Imaging and Image Processing
Time: 13:30-16:00Location: Room 401, the 4th floor of CNCCModerators: Prof. Bill A. Stout, Honorary President of CIGR, USA Prof. Yankun Peng, Prof. of China Agricultural University, China
Time Paper # Technical Presentations
13:30-13:45 2014-0550
Mapping of soluble solid content distribution in mulberry using near-infrared hyperspectral imagingYanru ZhaoCollege of Biosystems Engineering and Food Science, Zhejiang University, China
13:45-14:00 2014-0356
Emerging hyperspectral imaging for rapid and real-time monitoring of main spoilage bacteria in farmed salmon filletsHongju HeUniversity College Dublin, Ireland
14:00-14:15 2014-1451
Quantitative determination of the illegally added pigment green in tea by hyperspectral imaging technologyChanjun SunZhejiang University, China
14:15-14:30 2014-0456
Pixel based color detection technique for agricultural productsAbdullah BEYAZAnkara University, Agriculture Faculty, Department of Agricultural Machinery, 06130 , Aydınlıkevler Ankara. Turkey
14:30-14:45 2014-1311
Detection and quantification of chicken, horse and pork in minced beef using hyperspectral imagingMohammed KamruzzamanUniversity of Tokyo, Japan
157
15:00-15:15 Tea Break
14:45-15:00 2014-0050
Influence analysis of region of interest on apple sugar model by hyperspectral imagingZhiming GuoNational Engineering Research Center for Information Technologies in Agriculture, China
Time Paper # Technical Presentations
15:15-15:30 2014-0895
Application of visible and long-wave near infrared hyperspectral imaging for color measurement of grass carp (Ctenopharyngodonidella)Junhu ChengSouth China University of Technology, China
15:30-15:45 2014-0651
Design of open-carton molding device in full-automatic hot melt glue carton sealerShuxi TangChinese Academy of Agricultural mechanization Sciences, China
15:45-16:00 2014-1112
Research of healthy seedlings recognition technologyJianping HuKey Laboratory of Modern Agricultural Equipmentand Technology, Ministry of Education, Jiangsu University, China
158
SESSION VI
POSTER SESSIONS
SEPTEMBER 18, THURSDAY
08:30 - 12:00
Topic (1) Advanced food processing technologies
No. Poster # Paper # Paper Titles Name & Institution Country
1 61-001 2014-0082Study on New Processing and Equipment of The Tonic Soup
Composite Seasoning
Han QinghuaChinese Academy of
Agricultural Mechanization Sciences, Beijing, China
China
2 61-002 2014-0299Study on the extraction, purification and antioxidant property of mucus
protein from Chinese yam
Li JianHarbin University of
CommerceChina
3 61-003 2014-0381 Research and Experiment on a New Technology for Flax Seed Husking
Cai ZhiyongChinese Academy of
Agricultural Mechanization Sciences
China
4 61-004 2014-0607 Review of Buckwheat Shelling Equipment
Chen WeiInner Mongolia Agricultural
UniversityChina
5 61-005 2014-0732
The Optimization of The Processing Parameter of Resistant Starch From
Maize By Complex of Different Enzymatic Methods
Yao AolinCollege of Biological and Agricultural Engineering,
Jilin University, Changchun, Jilin , China
China
6 61-006 2014-0808 The Mechanical Properties of Walnut Impact Breaking Test
Chen LinCollege of Information
and Engineering Technology,Sichuan
Agricultural University
China
7 61-007 2014-0834Study on Key Processing
Technology for Instant Shrimp of Litopenaeus Vannamei
Zhang YongshengOffice of Science of
Technology, Agricultural University of Hebei
China
8 61-008 2014-0907
The Influence of Expression of Two Transaminase Genes ARO8
and ARO9 on the 2-phenylethanol Transformation in Saccharomyces
Cerevisiae
Yin ShengSchool of Food and Chemical
Engineering, Beijing Technology & Business
University
China
159
Topic (2) Imaging and image processing
9 61-009 2014-0909
Enhancement of 2-phenylethanol Biosynthesis in Saccharomyces
Cerevisiae by Co-expression of the Transaminase Genes ARO8 and the
Decarboxylase Gene ARO10
Yin ShengSchool of Food and Chemical
Engineering, Beijing Technology & Business
University
China
10 61-010 2014-1242The Backward Extraction
Technology of Soybean Protein by AOT Reverse Micelles
Yang GuangshengCollege of Food Science and Technology,Henan University of Technology
China
No. Poster # Paper # Paper Titles Name & Institution Country
11 62-001 2014-0048Application of Handheld-based Machine Vision Technology in Determining Banana Maturity
Liu YangtaiUniversity of Shanghai for Science and Technology
China
12 62-002 2014-0176A Multiple-Threshold Based Image Segmentation Method for Bananas
in Crate
Hu MenghanUniversity of Shanghai for Science and Technology
China
13 62-003 2014-0303
A Method of Nondestructive Detection and Analysis for Walnut
Internal Quality Based on X-ray CT Imaging
Zhou XuechengSouth China Agricultural
UniversityChina
14 62-004 2014-0526Peanuts Image Denoising Method
Based on Compressed Sensing Theory
Yu HainingDepartment of Mechanical and Electrical Engineering,
Qingdao Agricultural University
China
15 62-005 2014-1283Detection of Moldy Corn Using FT-
NIR Spectroscopy and Artificial Neural Networks
Yuan YingCollege of Engineering,
China Agriculture University
China
16 62-006 2014-1287Detection of Aspergillusflavus on Wheat Kernels Using FT-NIR and Factorial Discriminant Analysis
Zhao XinCollege of Engineering,
China Agriculture University
China
17 62-007 2014-1289
Fungal Detection in Maize Kernels Using FT-NIR Spectroscopy
Coupled with SIMCA and PLS-DA Methods
Chu XuanCollage of Engineering,
China Agricultural University
China
18 62-008 2014-1489
Continuous Field Monitoring and Intelligent Computation of Crop Growth based on Digital Image
Processing
Du JianjunBeijing Research Center
for Information Technology in Agriculture, Beijing
Academy of Agriculture and Forestry Sciences
China
19 62-009 2014-0646 Bruise Damage Stage Judgement Of Chinese Pear based on Histogram Zhou Shuiqin China
160
20 62-010 2014-1434
Effects of small amount of sodium carbonate on konjac glucomannan-
induced changes in starch nano-unit chains in gelatinization and
retrogradation processes
Zhou YunCollege of Food Science
and Nutritional Engineering, China Agricultural
University
China
Topic (3) Drying & bio-processing technology
No. Poster # Paper # Paper Titles Name & Institution Country
21 63-001 0509-047
Research on Rapid Fermentation Parameters for Processing of
Combined Rice Seedling Substrates Tray Made by Agricultural Organic
Wastes
Zhao ZhongliangHeilongjiang Province
Agricultural Mechanical Engineering Research
Institute
China
22 63-002 0509-051Design and Experiment on
Automatic Grading Machine for Kiwi
Zuo XingjianCollege of Mechanical and
Electronic Engineering, Northwest A&F University
China
23 63-003 0509-058Study on Controlled Freezing-point Drying and Character Analysis of
Carrot
Xue YamengInstitute of Food Science
and Engineering, University of Shanghai for Science and
Technology
China
24 63-004 0509-059Study on Microwave-vacuum
Drying of Carrot at Low Temperature
Xue YamengInstitute of Food Science
and Engineering, University of Shanghai for Science and
Technology
China
25 63-005 2014-0146 Drying Tomatoes in A Low Cost Tray Dryer
Ricardo Oliano de CarvalhoAgricultural Engineering
student; Federal University of Pelotas
Brazil
26 63-006 2014-0253Rice Drying Using Heat Pump
Dehumidifying System with Heat Pipe
Luo QiaojunGuangdong Institute of
Modern Agricultural Equipment
China
27 63-007 2014-0259 Grain Dryer Based on Heat Pump Dehumidifying
Luo QiaojunGuangdong Institute of
Modern Agricultural Equipment
China
28 63-008 2014-0277
Optimization of Hot air-microwave fluidized drying Conditions of
Lentinus edodes by Using Response Surface Methodology
Han QinghuaChinese Academy of
Agricultural Mechanization Science
China
29 63-009 2014-0297The Research Process of
Agricultural Products’ Microwave Drying Technology and Equipment
Lv WeiqiaoChinese Academy of
Agricultural Mechanization Science
China
30 63-010 2014-0499Heat Pump Drying Technology and Quality Comparison of Pericarpium
Citri Reticulatae
Gong LiGuangdong Agricultural
Machinery Research Institute
China
161
31 63-011 2014-0825Coproduction of Dried White
Radish and Juice by Vacuum Drying Method
Xue JingCollege of Mechanical Engineering, Tianjin
University of Science and Technology
China
32 63-012 2014-0827
Effect of Pretreatment by the Superheated Steam Jet Impingement Blanching on Drying Characteristics
and Red Pigment of Line Pepper
Zhang QianCollege of Mechanical and
Electric Engineering Shihezi University
China
33 63-013 2014-0889Influences of drying parameters on
drying duration of paddy rice in deep fixed-bed
Wang DanyangCollege of Engineering, Shenyang Agricultural
University
China
34 63-014 2014-0899
Experimental research on thin layer drying model verification and
optimization for paddy rice in a deep fixed-bed dryer
Wang DanyangCollege of Engineering, Shenyang Agricultural
University
China
35 63-015 2014-0954prediction of drying indices for
paddy rice in a deep fixed-bed based on neural network
Wang DanyangCollege of Engineering, Shenyang Agricultural
University
China
36 63-016 2014-1024 Drying Characteristics of Strawberries in Vacuum Dryer
Can ErtekinDepartment of Farm
Machinery, Faculty of Agricultural Engineering,
Akdeniz University
Turkey
37 63-017 2014-1035 Weibull Distribution for Modeling Drying of Areca Nut
Guo ShouzhiCollege of Mechanical and
Electronic Engineering, Shandong Agricultural
University
China
38 63-018 2014-1072Drying Characteristics of Green
Peas in a Fluidized Bed with Slotted Gas Distributor
Li ZhanyongCollege of Mechanical Engineering, Tianjin
University of Science and Technology
China
39 63-019 2014-1110 Air Impingement Drying Shrinkage Characteristics of Chinese Jujube
Lou ZhengInstitute of Agricultural
Product Processing, Chinese Academy of Agricultural
Engineering
China
40 63-020 2014-1237Optimization of Hot-air Drying Technical Parameters of Purple
Sweet Potato
Lv XiaorongCollege of Information & Engineering Technology,
Sichuan Agricultural University
China
41 63-021 0618-021Mass transfer simulation of sigillate
walnut (Juglans sigillata Dode) during convection drying
Yang WeiFaculty of Modern
Agriculture Engineering, Kunming University of Science and Technology
China
162
42 63-022 0618-097Design and Experiment of Horizontal Turntable Air
Impingement Dryer
Wang DongCollege of Engineering,
China Agricultural University
China
43 63-023 0519-016
Design, Fabrication and Evaluation of an Infrared – Assisted Vibratory
Bed Grain Dryer, a Case Study: Paddy Drying
Dariush ZareShiraz University Iran
44 63-024 0519-015
Optimization and Evaluation of a Microwave-AssistedFluidized
Bed Dryer with Exhaust Air Recirculating System:Case study,
Corn Drying
Dariush ZareShiraz University Iran
45 63-025 2014-0318 Modeling of Thin Layer Hot Air-Infrared Drying of Green Pea
Dariush ZareShiraz University Iran
Topic (4) Functional foods processing technology and evaluation
Topic (5) Functional foods processing technology and evaluation
No. Poster # Paper # Paper Titles Name & Institution Country
46 64-001 0509-037
Investigation of the Solid-state Fermentation of Chinese Traditional Aromatic Vinegar During Summer
Hot Season
Zhu YaodiSchool of Food and
Biological Engineering, Jiangsu University
China
47 64-002 2014-0301 Functional study of star anise fennel essential oil
Liu NingHarbin University of
CommerceChina
48 64-003 2014-0806
Extraction and Antioxidant Activity of Polysaccharides from Ganoderma Lucidum Using Acidic Electrolyzed
Water
Yan ZhengChinese Academy of
Agricultural EngineeringChina
49 64-004 2014-1141
Influence of Pre-fermentation Cold Maceration Treatment and Cap
Management on Biogenic Amines in Cabernet Sauvignon Wines
Liu PeitongChina Agricultural
UniversityChina
50 64-005 0618-012The Isoflavone and Purine Changing of Soymilk During Fermentation by
Yeast Strains
Gan JingCollege of Food Science
and Nutritional Engineering, China Agricultural University
China
No. Poster # Paper # Paper Titles Name & Institution Country
51 65-001 2014-0102An Offline Portable System Based on Dual-DSP for Nondestructive
Detection of Livestock Meat
Peng YankunChina Agricultural
University China
52 65-002 2014-0293
Quantitative determination of camellia oil adulterated with
soybean oil by Vis/NIR spectroscopy and chemometrics
Tong SunJiangxi Agricultural
UniversityChina
163
Topic (6) Novel agro-processing
53 65-003 2014-0410 Near Infrared Rapid Detection of Protein,Fat,Starch and Water in Rice
Yang SuxianHuazhong Agricultural
UniversityChina
54 65-004 2014-0953
Studies Of Quantitative Detection For The Concentration Of Ethanol-water Solution Using Portable Near-
infrared Raman Spectrometer
Zou XiaoboCollege of Food and
Biological Engineering, Jiangsu University
China
55 65-005 2014-1170Compositional Analysis of Fish Feed
Using Mid-infrared Spectroscopy and Chemometrics
Zhu FengleCollege of Biosystems Engineering and Food
Science, Zhejiang University
China
56 65-006 2014-1250Moisture Content Detection of Corn
Ear by Bioelectrical Impedance Spectroscopy
Zhao PengfeiCollege of Information
and Electrical Engineering, China Agricultural
University
China
57 65-007 2014-1468An Improvement on Models of Pork
Quality Detection based on VIS/NIR Reflectance Spectroscopy
Peng YankunChina Agricultural
UniversityChina
58 65-008 0618-019Study of Non-destruction Detection Technology for Free Water Content
of Beef
Xu YangCollege of Engineering,
China Agricultural University
China
59 65-009 2014-0103A Potential Technique for Detection
of Foodborne Pathogens in Pork Meat Using Raman Spectroscopy
Tao FeifeiChina Agricultural
UniversityChina
No. Poster # Paper # Paper Titles Name & Institution Country
60 66-001 2014-0023
Effect of Low-temperature Plasma Treatment on Maize (Zea mays Linn.) Seeds Germination and
Seedling
Shao ChangyongCollege of Engineering,
China Agricultural University
China
61 66-002 2014-0321
The Changes of Emulsify Properties of Soybean Protein Isolate Induced
by PH-shifting Combined with Heating Treatment
Liu QianNortheast Agricultural
UniversityChina
62 66-003 2014-0726 Biodiesel Production from Bovine Tallow
Ricardo Oliano de CarvalhoAgricultural Engineer,
Federal University of PelotasBrazil
63 66-004 2014-0807 Shelled Walnut Shell Gap Extrusion Parameter Optimization Agency
Chen LinCollege of Information and
Engineering Technology,Sichuan Agricultural University
China
64 66-005 2014-1185 Castor Seed Mechanical Properties for Shelling Machine
Hou JunmingDepartment of Engineering,
Shenyang Agricultural University
China
164
65 66-006 2014-1330
The Design and Parameter Optimization of Automatic Positioning
Mechanism for Automatic Injection System of Fry Vaccine
Liang RenghaoCollege of Biosystems Engineering and Food
Science, Zhejiang University
China
66 66-007 2014-1404
Synergistic Effect of Thermal and Pulsed Electric Field Treatment on
the Permeability of Vesicles - A Cell Membrane Simulation
Liu ZhiweiCollege of Light Industry and Food Sciences, South
China University of Technology
China
67 66-008 2014-1430Expression and Characterization
of the Aspartokinase from Corynebacterium Pekinense E31
Ren JunCollege of Food Science
and Engineering, Jilin Agricultural University
China
68 66-009 0526-020 Utilisation of Rice Straw for Composite Panel Manufacturing
Luo PengCollege of Mechanical Engineering, Tianjin
University of Commerce
China
69 66-010 0618-070
On Ammonia Concentrations in Breeding Environments of Dairy
Houses Located in the Iblean Highlands
Giovanni CasconeUniversity of Catania,
Department of Agri-food and Environmental Systems
Management
Italy
70 66-011 2014-1345The Finite Element Simulation
and Optimization Design of Biodegradable Seedling Pot
Liu Xiangdong Jiamusi University China
Topic (7) Packaging & storage technology
No. Poster # Paper # Paper Titles Name & Institution Country
71 67-001 2014-0278The Influence of Different Storage Conditions on The Dried Quality of
Lentinus Edodes
Han QinghuChina Agricultural
UniversityChina
72 67-002 2014-0653
Development and Validation of A Predictive Model to Describe The Effect of Carbon Dioxide on The
Growth of Listeria Monocytogenes in Fresh-cut Iceberg Lettuce Packaged
under Modified Atmospheres
Yin XiaotingNanjing Agricultural
UniversityChina
73 67-003 2014-1033Preparation , Micro-structure
and Mechanical Performance of Soybean-protein Film
Yang ChuanminSchool of Mechanical Engineering, Tianjin
University of Commerce
China
74 67-004 2014-1122Optimization of composite
preservative on stewed duck esophagus
Xie ManmanSchool of Medical Instrument
and Food Engineering, University of Shanghai for Science and Technology
China
75 67-005 0618-099
Utilization of High Intensity Pulsed Electric Fields (PEF) as
an Unconventional Non Thermal Method of Liquid Food Preservation
Mohamed Hatem Cairo University Egypt
165
Topic (8) Postharvest handling and management
76 67-006 2014-1056
Study of Rheological Behavior of Soy Protein Spray Coating
Dispersions for Edible Vegetable-based Composite Paper
Hou HonghongSchool of Mechanical Engineering, Tianjin
University of Commerce
China
77 67-007 2014-0592
Application of new sterilization technology in the storage and
transport of fruits and vegetables preservation
Zhang XinyuCollege of Engineering, South China Agriculture
University, Guangzhou, China
China
78 67-008 2014-0662
Using Comsol Multiphysics for the Evaluation of Liquid Food Thermal Steriliza-tion: Effect of Orientation
of Cylinder Cans
Wang LiangZhejiang University China
No. Poster # Paper # Paper Titles Name & Institution Country
79 68-001 0519-005Effect of Chlorine Dioxide on Postharvest Storage Quality of
Agaricus Bisporus
Chen CunkunNational Engineering Technology Research
Center for Preservation of Agriculture Products
China
80 68-002 2014-0358On-line nondestructive inspecting
sugar content of orange using multi-spectral imaging
Liu MuhuaJiangxi Agricultural
UniversityChina
81 68-003 2014-0605
Relationship between Hyperspectral Imaging and Physiological and
Biochemical Properties during the Postharvest Decay of Strawberry
Sun YeNanjing Agricultural
UniversityChina
82 68-004 2014-0645The design of a device for online weight measuring and grading of
freshwater fish
Wang KundianCollege of Engineering,
Huazhong Agriculture UniversityChina
83 68-005 2014-0870Non-destructive Prediction
of Hardness of Carrots using Hyperspectral Imaging
Ye XujunFaculty of Agriculture and
Life Science, Hirosaki University
Japan
84 68-006 2014-0911
Comparison of Effects of Radiation UV-C on Post-harvest Disinfestation of Starfruit, Kumquat and Acerola
Infested by Fruit Fly (Diptera: Tephritidae)
Stella VieiraBiological Institute,
Experimental Center Researcher collaborator of School of Agricultural Engineering
Brazil
85 68-007 2014-1182
Study of Dynamic Discriminant Models of Huping Jujube Damage
Based on Visible/ Near Infrared Spectral
Wang BinCollege of Engineering,
Shanxi Agricultural University
China
86 68-008 2014-1220 Effect of Air Precooling on Quality of Apricot Fruit
Li JianBeijing Engineering and
Technology Research Center of Food Additives, Beijing Technology and Business
University
China
166
87 68-009 0618-098Using of Safety Environment
Essential Oil to Improve Quality and Storage Ability of Grapes
Mohamed HatemCairo University Egypt
88 68-010 0618-101
Effects of Postharvest Storage on Nutritional Quality of New
Mandarin Cultivars Grown in South Africa
Nazneen Barday Department of Horticultural
Science, Stellenbosch University
South Africa
89 68-011 2014-1396 A green physical refining process of olive oil with high acid value
Hu ShuzhenChinese Academy of
Agricultural Mechanization Sciences
China
Topic (9) Quality measurement, modeling and control
No. Poster # Paper # Paper Titles Name & Institution Country
90 69-001 0508-020
Evaluation Study of a Magnetic Nanoparticle Based Nucleic Acid
Isolation and Purification Instrument for DNA Extraction of E. Coli O157:
H7
Chen YahuiMinistry of Agriculture,
China Agricultural University
China
91 69-002 2014-0098A Detection Method of Melamine Mixed Into Milk Powder Using Raman Scattering Spectroscopy
Zhao JuanChina Agricultural
UniversityChina
92 69-003 2014-0274 Thermal Properties of ‘Foie-gras’ Food Products
Cristina RattiDepartment of Soils
Sciences and Agro-Food Engineering, Université
Laval
Canada
93 69-004 2014-0320
The Influence of Physicochemical and Emulsifying Properties Induced
by Hydroxyl Radical-stressed Soybean Protein Isolate
Lu YanNortheast Agricultural
UniversityChina
94 69-005 2014-0351Hydrated Chia Seed Effect on Wheat
Flour and Bread Technological Quality
Ivan SvecInstitute of Chemical Technology in Prague
Czech Republic
95 69-006 2014-0353Primary Investigation on Cigarette
Classification Identification Based on Hyperspectral Imaging
Wu QiongShenyang Agricultural
UniversityChina
96 69-007 2014-0378Experimental Study on Friction
Characteristics of Caragana Korshinskii Kom
Liu XiaoShanxi Agricultural
UniversityChina
97 69-008 2014-0389Experimental Study on the
Rheological Properties of Caragana Korshinskii Materials
Kong lijuanCollege of Engineering,
agricultural engineering, Shanxi Agricultural
University
China
98 69-009 2014-0392Conventional Mechanical Properties of Solid Fuel Briquettes Made from
Caragana Korshinskii Kom
Cui RuixiaoShanxi Agricultural
UniversityChina
167
99 69-010 2014-0488
Application of Colorimetric Sensor Technology for Monitoring and Distinguishing of Predominant
Spoilage Bacteria in Pork
Zou XiaoboJiangsu university China
100 69-011 2014-0559Rapid Detection of Escherichia
coli on Vegetables based on Pattern Recognition
Ding YunEditorial department of Journal of Bionic
Engineering, Jilin University
China
101 69-012 2014-0567
The Effect of Abrupt Drops in Temperature on the Growth of
Pseudomonas Aeruginosa Single Cells
Wang XinSchool of Medical
Instrument and Food Engineering, University of Shanghai for Science and
Technology
China
102 69-013 2014-0814
Enhancement of The Cleanability of Milk Fouling on Highly Finished
Inner Surface of Stainless Steel Tubing
Ikko IharaDepartment of Agricultural
Engineering, Kobe University
Japan
103 69-014 2014-0841Effect of Carboxymethyl Cellulose
on Stabilization of Soy Protein Isolate Dispersion at Acid pH
Li XinxinSchool of Medical
Instrument and Food Engineering, University of Shanghai for Science and
Technology
China
104 69-015 2014-0843Research on Sterilization Method of Minced Fish Products to Prolong the
Shelf-life at Room Temperature
Ding YunEditorial department of Journal of Bionic
Engineering, Jilin University
China
105 69-016 2014-0935Effect of Enzymatic Hydrolysis on
Bioavailability of Corn Gluten Meals in Vivo
Jin JianSchool of Food and
Biological Engineering, Jiangsu University
China
106 69-017 2014-1086 Effect of Microwave Pretreatment on the Quality of Sesame Oil
Ju YangFood Science and
Engineering, Henan University of Technology
China
107 69-018 2014-1111
The Information Variation Feature and Discriminant Capabilities of Electronic Nose for Adulterated
Honey
Shi BolinSchool of Life Science,
Shanghai UniversityChina
108 69-019 2014-1191Penetration Depth of Near-
infrared Light in Small, Thin-skin Watermelon
Qian ManCollege of Mechanical and
Electronic Engineering, Northwest Agricultural and
Forestry University
China
109 69-020 2014-1309Study on Application Effects of Octacosanol in the Laying Hens
Diets
Peng KaiCollege of Engineering
, China Agricultural University
China
168
110 69-021 2014-1372
Simultaneous Quantitation of Organic Acids and Monosaccharides
by High-performance Liquid Chromatography
Lu XinInstitute of Agricultural
Processing, Henan Academy of Agricultural Sciences
China
111 69-022 2014-1401Study on the Effects of Dietary Components on Ferrous Sulfate
Absorption by Caco 2 cells
He YifanCollege of Food Science
and Nutritional Engineering, China Agricultural
University
China
112 69-023 2014-1432Study on the Effects of Hydrocolloids on Characteristics of Frozen Dough
and Quality of Bread
Wang XuanDepartment of Food Science
& Nutrition Engineering, China Agricultural
University
China
113 69-024 2014-1435
Cloning, Purification, Characterisation and Mutational
Analysis of Homoserine Dehydrogenase from
Corynebacterium Pekinense
Xu JinkunCollege of Food Science
and Engineering, Jilin Agricultural University
China
114 69-025 2014-1496Effect of Components of WPC Neutrase Hydrolysates on Iron
Uptake by Caco-2 Cells
Qian GaoCollege of Food Science
and Nutritional Engineering, China Agricultural
University
China
115 69-026 2014-1501 Evaluation of Nutrients During Fresh Rice Noodle Processing
Yang MengyanCollege of Food Science
& Nutritional Engineering, China Agricultural
University
China
116 69-027 2014-1623A Real-time Detection System of the
Pig Backfat Based on the Optical Image
Pang TianChina Agricultural
UniversityChina
117 69-028 2014-1626Research on Glycosylation and
Enzymatic Modification on Soybean Protein Allergies
Zhu TingweiCollege of Food Science and Technology, Henan
University of Technology
China
118 69-029 2014-1627Electrochemical Behavior of Rutin
on Graphene and Ionic Liquids Composite Film Modified Electrode
Wang HuiMinistry of Agriculture,
China Agricultural University
China
119 69-030 0618-065Optimization of Composite
Preservative on Stewed Duck Esophagus
Xie ManmanSchool of Medical
Instrument and Food Engineering, University of Shanghai for Science and
Technology
China
120 69-031 2014-0398
Correlation Study between Biomechanical Properties and Moisture Content of Fruits and
Vegetables
Feng HuiminShanxi Agricultural
UniversityChina
169
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION VII
INFORMATION SYSTEMS
170
Overview of Session VII: Information Systems
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the Delegates Access
Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 1. Keynote Speeches Location: 309B, CNCC
15:00-15:15 Tea Break
15:15-16:45 1. Keynote Speeches Location: 309B, CNCC
19:00-21:00 Welcome Receiption Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 2. Keynote Speeches Location: 309B, CNCC
10:00-10:15 Tea Break
10:15-12:00 2. Keynote Speeches Location: 309B, CNCC
12:00-13:30 Lunch Location: Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
3. Agricultural Information
Sensing Location:
302B, CNCC
4. Precision Agriculture
and Intelligent Instrument Location:
408, CNCC
Special Session I
The 1st International Conference on
Smart Agriculture Innovative
DevelopmentLocation:
308, CNCC
(Please see attached sheets)
Special Session II
The 8th International Conference
on Computer & Computing
Technologies in AgricultureLocation:
407, CNCC(Please see attached
sheets)
15:00-15:15 Tea Break
15:15-17:00 Technical Oral Presentation
3. Agricultural Information
Sensing Location:
302B, CNCC
4. Precision Agriculture
and Intelligent Instrument Location:
408, CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
171
Thursday, Sept. 18
08:30-10:00 Technical Oral Presentation
5. Sensing and Traceability
for Quality and Safety of Agro-
products Location:
302B, CNCC
6. Computer Vision
and Image Processing
Location: 302A, CNCC
Special Session I
The 1st International Conference on
Smart Agriculture Innovative
DevelopmentLocation:
308, CNCC
(Please see attached sheets)
Special Session II
The 8th International Conference
on Computer & Computing
Technologies in AgricultureLocation:
407, CNCC(Please see attached
sheets)
10:00-10:15 Tea Break
10:15-12:00 Technical Oral Presentation
5. Sensing and Traceability
for Quality and Safety of Agro-
products Location:
302B, CNCC
6. Computer Vision
and Image Processing Location:
302A, CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Technical Oral Presentation
7. The Application of Mobile
Communication Terminal in the
Agricultural Informatics Location:
302B, CNCC
8. Decision Support
Systems and Artificial
IntelligenceLocation:
302A, CNCC
Special Session I
The 1st International Conference on
Smart Agriculture Innovative
DevelopmentLocation:
308, CNCC
(Please see attached sheets)
Special Session II
The 8th International Conference
on Computer & Computing
Technologies in AgricultureLocation:
407, CNCC(Please see attached
sheets)15:00-15:15 Tea Break
15:15-15:30 Technical Oral Presentation
7. The Application of Mobile
Communication Terminal in the
Agricultural Informatics Location:
302B, CNCC
8. Decision Support
Systems and Artificial
IntelligenceLocation:
302A, CNCC
16:00-17:00 Closing Ceremony Location: 309A+B, CNCC
19:00-21:00 Gala Dinner Location: Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
172
SESSION VII, INFORMATION SYSTEMS
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-17:001. Keynote Speeches
Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Yibin Ying, Prof. Lalit Verma,
15:00-15:15 Tea Break
Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Fedro S. Zazueta Ranaha,
Prof. Wanlin Gao,
Time Paper # Technical Presentations
13:30-14:00 0826-701
Innovation-driven thinking on the new generation ICT for agricultural modernization in ChinaProf. Maohua WangAcademician of Chinese Academy of Engineering, China
14:00-14:20 0826-702
IT in agriculture: a story of convergenceProf. Fedro S. Zazueta RanahaProfessor and Associate CIO of Office of Academic Technology, University of Florida, USA
14:20-14:40 0826-004
Information technology and agriculture – global challenges and opportunitiesProf. K. C. TingProfessor and Head of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA
14:40-15:00 2014-1169Crop sensing –technologies and applicationsProf. Naiqian ZhangKansas State University, USA
Assistant President and Professor of Zhejiang University, Chinaincoming President of American Society of Agricultural and Biological Engineers, USA
Professor and Associate CIO of Office of Academic Technology, University of Florida, USA
Dean of College of Information and Electrical Engineering of China Agricultural University, China
173
2. Keynote Speeches
Location: Room 309B, the 3rd floor of CNCCChairs: Prof. Daoliang Li,
Prof. Seishi Ninomiya,
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:00
Time Paper # Technical Presentations
15:20-15:40 0826-003Light scattering technology for food property and quality assessmentProf. Renfu LuMichigan State University, USA
15:40-16:00 0826-008
Precision farming: to meet the challenges of agricultureProf. Chunjiang ZhaoDirector and Chief Scientist of National Engineering Research Center for Information Technology in Agriculture, China
16:00-16:20 0826-709
From internet of things to smart agricultureProf. Nick SigrimisFounder and President of spinoff Geomations SA-“from research and innovation to Social Exploitation”, founder and first Chair of CIGR-ICT section, USA
16:20-16:40 0826-708Nano-biosensors for biodetection in agricultural and food systemsProf. Yanbin LiProfessor of Zhejiang University, China
16:40-17:00 0826-720Precision aerial application: Current and future trendsProf. Yubin LanUSDA-ARD, USA
Time Paper # Technical Presentations
08:30-08:50 0826-710
Machine intelligence and automations for improved productivity, food quality, and profitProf. Yang TaoProfessor of Department of Bioengineering, University of Maryland, USA
Director of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China
Professor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan
174
08:50-09:10 0826-001
Key technologies of sensing and traceability for greenhouse productionProf. Suming ChenProfessor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei
09:10-09:30 0826-712
Terahertz (THz) spectroscopy and its application in quality and safety evaluation of agro-productsProf. Yibin YingProfessor of Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, China
09:30-09:50 0826-006
Precision agriculture, livestock and aquaculture for Asian food productionProf. Naoshi KondoProfessor of Graduate School of Agriculture, Kyoto University, Japan
10:00-10:15 Tea Break
Location: Room 309B, the 3rd floor of CNCCChair: Prof. Naoshi Kondo,
Time Paper # Technical Presentations
10:20-10:40 0826-002
ICT innovations for sustainable food productionProf. Seishi NinomiyaProfessor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan
10:40-11:00 0826-715
Rural information network service status and prospectsProf. Wanlin GaoDean of College of Information and Electrical Engineering of China Agricultural University
11:00-11:20 2014-0471
Delivering knowledge and solutions at your fingertips: a look at mobile apps and development in agricultureDr. Jiannong XinJoint faculty member at Office of Information Technology and Department of Agricultural and Biological Engineering, Institute of Agricultural and Food Sciences, University of Florida, USA
11:20-11:40 0826-007
Challenges and the State of Art in Internet of Things in Aquaculture in ChinaProf. Daoliang LiDirector of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China
Professor of Graduate School of Agriculture, Kyoto University, Japan
175
11:40-12:00 2014-1610
Dielectric sensors in an automated facility for testing salt tolerance of irrigated field cropsProf. Gerritvan StratenEmeritus professor of Wageningen University, the Netherlands
3. Agricultural Information Sensing
Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Nick Sigrimis,
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-16:44
Time Paper # Technical Presentations
13:30-13:42 2014-0140
Monitoring of soil water content by an electromagnetic access tube sensorY. SunaUniversity of Bonn, Germany
13:42-13:54 2014-1041
A method of photosynthetic rate prediction of tomato plants under solar greenhouse conditionMan ZhangChina Agricultural University, China
13:54-14:06 0618-059
Information system for estimating geometry and thermo-mechanical properties of biological products for simulating the heat and water transport processes Jerzy WeresPoznan University of Life Sciences, Poland
14:06-14:18 2014-0655
Analysis of the evaluation method for the recognition algorithm for occluded tomatoes based on the idea of measurementRong XiangChina Jiliang University, China
14:18-14:30 2014-0095
Evaluation of different global navigation satellite systems and analyses of movement patterns of cattle on alpine pasturesJan MaxaBavarian State Research Centre for Agriculture, Germany
Instrumentation and Automation in the Ag.University of Athens, Greece
176
14:30-14:42 2014-1022
The calibration model and key technology in ion flux non-invasive measurement of living plants in situLin XueChina Agricultural University, China
14:42-14:54 2014-1286
Successive projections algorithm on spectral multivariable selection with different calibration methods for the rapidHailiang ZhangZhejiang University, China
15:00-15:15 Tea Break
Location: Room 302B, the 3rd floor of CNCCModerators: Prof. Renfu Lu, Professor of Michigan State University, USA Prof. Huanyu Jiang, Professor of School of Biosystems Engineering and Food
Science, Zhejiang University, China
Time Paper # Technical Presentations
15:20-15:32 2014-1276Study of multifactor environmental warning model in swine cultureZhenli CaoChina Agricultural University, China
15:32-15:44 0618-003
Temperature correction measurement model of soil nitrate nitrogen based on Ion Selective ElectrodeYing ZhuChina Agricultural University, China
15:44-15:56 2014-0495
The research of topsoil moisture measurement based on dielectric constant method Qiaoli WangBeijing Forestry University, China
15:56-16:08 2014-1138The research of ion flow detection system of plant on LabVIEWZiyang WangChina Agricultural University, China
16:08-16:20 2014-0998
Information SystemsDesign of Portable Multi-channel System for Physiological Signal AcquisitionTing Li China Agricultural University, China
177
15:00-15:15 Tea Break
Location: Room 408, the 4th floor of CNCCModerators: Prof. Gerritvan Straten,
4. Precision Agriculture and Intelligent Instrument
Location: Room 408, the 4th floor of CNCCModerator: Prof. Yang Tao, Professor of Department of Bioengineering, University of Maryland, USA
Time Paper # Technical Presentations
13:30-13:42 2014-1169Vehicle-based and handheld high-throughput phenotypersNaiqian ZhangKansas State University, USA
13:42-13:54 2014-0281The design and simulation of a novel gripper for the fruit picking robotFuzeng YangNorthwest A&F University, China
13:54-14:06 0509-034Scheduling model for cross-regional work of cotton-pickerNaiqian ZhangChina Agricultural University, China
14:06-14:18 0519-006
DBH and height measurement of trees based on a single scan of terrestrial laser scannerGaochao BuBeijing Forestry University, China
14:18-14:30 2014-1251
Detection of insect disease spots of processing tomato by LabVIEW VisionZhuqing DingShihezi University, China
14:30-14:42 0523-007Classification of greengrocery seeds based on near infrared spectroscopyJun SunJiangsu University, China
14:42-14:54 0509-035Design and development of biomechatronic productsShujun ZhangUniversity of Gloucestershire, United Kingdom
Professor of Emeritus professor of Wageningen University, the Netherlands
178
Time Paper # Technical Presentations
15:20-15:32 2014-0942
A study of a shock-absorbing for an agricultural-purposed front-end loader with an electrohydraulic directional valveJongwoo HaSeoul National university, Korea
15:32-15:44 2014-1225The application of intelligent robotic technique in agricultural fieldYaolun ZhangUniversity of Macau, Macau
15:44-15:56 2014-0399Tube stamp for mechanical intra-row individual plant weed controlFrederik LangsenkampUniversity of Applied Science Osnabrueck, Germany
15:56-16:08 2014-0241Development of a general-purpose electric field robotXiang YinShandong University of Technology, China
16:08-16:20 2014-0172
Intelligent control system of cluster multi-span photovoltaic greenhouseLiqing ZhaoQingdao Agricultural University, China
16:20-16:32 2014-0816
Cloud and IOT-based architecture and implementation of a greenhouse micro-climate management systemRuihua WeiTongji University, China
16:32-16:44 0526-013Sugarcane harvester cutter automatic control system designYiqi HuangGuangxi University, China
5. Sensing and Traceability for Quality and Safety of Agro-products
Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Yanbin LI,
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-11:56
Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China
179
Time Paper # Technical Presentations
08:30-08:42 2014-0114Advanced techniques for detecting nitrogen status in riceYubin LanUSDA-ARS, USA
08:42-08:54 2014-0582
NIR hyperspectral imaging for mapping of moisture content spatial distribution in tea buds during dehydrationKeqiang YuZhejiang University, China
08:54-09:06 2014-1028
Research on detection moisture of intact meat based on discrete LED wavelengthsLifeng FanChina Agricultural University, China
09:06-09:18 2014-0666Isolation of DNA from rice using silica-coated magnetic particlesLiu WangZhejiang University, China
09:18-09:30 2014-0962
Self-assembled monolayers-based impedance immunosensor for rapid etection of escherichia coli O157:H7 using screen-printed interdigitated microelectrodesZhanming LiZhejiang University, China
09:30-09:42 2014-0470
Rapidly quantitative determination of soluble solids in bottled vinegar based on nirs and pls methodShanshan YanShanxi Agricultural University, China
09:42-09:54 2014-0680
Research of automatic purification technology for the harvested raw shrimp based on GLCM and ID3Zihao LiuZhejiang University, China
10:00-10:15 Tea Break
Location: Room 302B, the 3rd floor of CNCCModerator: Prof. Yi-Chich Chiu, National Ilan University, Chinese Taipei
Time Paper # Technical Presentations
10:20-10:32 0826-719Ultrasensitive terahertz sensing of kanamycin sulfate with metamaterialLijuan XieZhejiang University, China
180
10:32-10:44 2014-0720
CyberGIS-enabled ConSEnT framework development for grain post-harvest loss prevention Tao LinUniversity of Illinois at Urbana-Champaign, USA
10:44-10:56 2014-1082
Research on pork freshness detection using electronic nose sensor array and feature optimization Ningzhi WangChina Agricultural University, China
10:56-11:08 2014-0308
Nondestructive discrimination of the lettuce varieties based on hyperspectral technology combined with characteristic wavelengths Jun SunJiangsu University, China
11:08-11:20 2014-0965
Feasibility study of Superfloc127 in Ion-Selective Electrode Based Soil Nitrate-nitrogen Rapid Detection Linan ZhangChina Agricultural University, China
11:20-11:32 2014-1023
Identification of data characteristics of plant stress responses based on dynamic monitoring of ion flux in vivo Lin XueChina Agricultural University, China
6. Computer Vision and Image Processing
Location: Room 302A, the 3rd Floor of CNCCModerators: Prof. Suming Chen,
Prof. Jian Wu,
Time Paper # Technical Presentations
08:30-08:42 2014-0818
Tomato yield mapping in green house using color image analysis and machine learning methodKyosuke YamamotoThe University of Tokyo, Japan
08:42-08:54 2014-0250
Precise in-situ measurement of pakchoi leaf area with an ad hoc machine vision based monitoring platformLiang GongShanghai Jiao Tong University, China
Professor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei
Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China
181
10:00-10:15 Tea Break
Location: Room 302A, the 3rd floor of CNCCModerator: Prof. Yubin Lan, USDA-ARS, USA Prof. Gang Liu, China Agricultural University, China
08:54-09:06 2014-1179Study of plant growth measurement based on embedded vision systemQiaoyu LiChina Agricultural University, China
09:06-09:18 2014-0256Blind image quality assessment using compact visual codebooksYan LongNorthwest A&F University, China
09:18-09:30 0508-004Grading system for tomato mechanized seedling based on machine visionSubo TianShenyang Agricultural University, China
09:30-09:42 2014-1152
Automatic detection of paddy rice flowering from time-series RGB images taken under outdoor environmentWei GuoThe University of Tokyo, Japan
Time Paper # Technical Presentations
10:20-10:32 2014-1414
Identification of cabbages and weeds in seedlings using spectral imagingWei DengBeijing Research Center for Information Technology in Agriculture, China
10:32-10:44 2014-1549
Study on detecting myzuspersicae infection of oilseed rape leaves using hyperspectral imaging technologyZaichun ZhuangZhejiang University, China
10:44-10:56 2014-1351Digital imaging technique to detect and count aphids in soybeansSreekala BajwaNorth Dakota State University, USA
10:56-11:08 2014-0504
Research on video flame detection of forest fire based on spatial-temporal featureMingming XuNanjing Forestry University, China
182
11:08-11:20 2014-0960
Classification of pest species using multi-class support vector machine and computer visionWenyong LiBeijing Research Center for Information Technology in Agriculture, China
7. The Application of Mobile Communication Terminal in the Agricultural Informatics
Location: Room 302B, the 3rd Floor of CNCCModerator: Prof. Jiannong Xin, Institute of Agricultural and Food Sciences, University of Florida, USA Dr. Tao Lin, University of Illinois at Urbana-Champaign, USA
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-15:06
Time Paper # Technical Presentations
13:30-13:42 2014-0135
Research on remote identification of apple leaf disease based on Android platformMeijia WangNorthwest A&F University, China
13:42-13:54 2014-1066
Smartphone-based field disease recognition of wheat using Support Vector MachineWenjing LingChina Agricultural University, China
13:54-14:06 2014-0200Cloud services platform on modern livestock management and marketingQiubo XieGuangdong Institute of Modern Agricultural Equipment, China
14:06-14:18 2014-1269
Design and implementation of weixin public service platform for development & research center of china agricultural mechanizationQing DongChina Agricultural University, China
14:18-14:30 0508-006
Mobile terminal based accurate monitoring method for farm machinery operationCaicong WuPeking University, China
Champaign, USA
183
15:06- 16:00 Tea Break
8. Decision Support Systems and Artificial Intelligence
Location: Room 302A, the 3rd Floor of CNCCModerator: Prof. Ning Wang, Oklahoma State University, USA
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-14:54
14:30-14:42 2014-0523
The monitoring system of aquaculture based on ZigBee and android and GPRSChenhu XuJiangsu University, China
14:42-14:54 2014-1062
Encrypted QR code creation and recognition system based on Android smartphone of egg tracingXiaolin ZhanChina Agricultural University, China
14:54-15:06 2014-0138
Research of birds song of He Chuan wetland monitoring system based on ARM and 3GJiachen RenNorthwest A&F University
Time Paper # Technical Presentations
13:30-13:42 2014-0631Development of a driving simulator for auto-guidance tractorXiongzhe HanSeoul National University, Korea
13:42-13:54 2014-1282Detection of porcine lame walk based on Star skeleton modelWeixing ZhuJiangsu University, China
13:54-14:06 0618-001Research on fuzzy control method of greenhouse temperatureHaoran ZhangChina Agricultural University, China
Prof. Hongxin Cao, Deputy Director of Research Professor of Institute of Agricultural Economics and Information, Jiangsu Academy of Agricultural Sciences, China
184
14:06-14:18 2014-0052
One multi-channel detection system for precision rapeseed drill performance based on time intervalsYouchun DingHuazhong Agricultural University, China
14:18-14:30 2014-0415
Air Inflation & Consumption Model of a Compressor-tank-ejector System for Tomato Robotic HarvestingJizhan LiuJiangsu University
14:30-14:42 2014-0056Research of UAV data processing applied in agricultureHaiyang YuBeijing agricultural information technology research center
14:42-14:54 2014-1083
Portunus trituberculatus larvae growth and development study and simulationMingzhu HaoNingbo University
SESSION VII, INFORMATION SYSTEMS
18TH WORLD CONGRESS OF CIGR
THE 1st INTERNATIONAL CONFERENCE ON SMART
AGRICULTURE INNOVATION DEVELOPMENT
(ICSaid 2014)
ORAL PRESENTATIONS
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-17:00
1. Opening Ceremony
Location: Room 308, the 3rd floor of CNCC
Moderator: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China
Agricultural University
Time Technical Presentations
13:30 – 13:40 Welcome speech from CAU
13:40 – 13:50 Greeting Address from Ministry of Science and Technology
13:50 – 14:00 Greetings Address from Ministry of Agriculture
14:00 – 14:10 Greetings Address from Ministry of Education
14:10 – 14:30 Prof. Maohua Wang
Academician of Chinese Academy of Engineering, China
14:30 – 15:00 GROUP PHOTO 15:00-15:15 Tea Break
2. Session I: Globalization and creation development on smart agriculture
Location: Room 308, the 3rd floor of CNCC
Moderator: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China
Agricultural University
Time Technical Presentations
15:15 – 15:45
Soil sensing for precision agriculture
Prof. Ken Sudduth
Ph.D, Research Agricultural Engineer, President of ISPA
15:45 – 16:00 Prof. Xiwen Luo
Academician of Chinese Academy of Engineering, China
16:00 – 16:15
Current status and future prospects for vehicle robotics
Prof. Noboru Noguchi
Ph.D, Professor, Member of Science Council of Japan (SCJ) Hokkaido
University, Japan
16:15 – 16:30
Prof. Chunjiang Zhao:
Ph.D, Professor, Director, National Engineering Research Center for
Information Technology in Agriculture (NERCITA), China
16:30 – 16:45
Prof. Yibin Ying
Professor of Faculty of Agriculture, Life and EnvironmentSciences, Zhejiang
University, China
16:45 – 17:00
Large–scale Wind and Photovoltaic Power Accommodation Based on the
Coordination Control of Load, Network and Generation
Prof. Weizhou Wang
3. Dinner (17:00-19:00)
Location: Room 310, the 3rd floor of CNCC
ORAL PRESENTATIONS
SEPTEMBER 18, 2014
THURSDAY MORNING
08:30-12:00
1. Session II: Collaborative innovation and key technology on smart agriculture Part A
Location: Room 308, the 3rdfloor of CNCC
Moderator: Dr. Ning Wang, Ph.D, Professor, Department of Biological and Agricultural
Engineering, Kansas State University , USA
Time Technical Presentations
08:30 – 08:45
Research and application of WSN with active variable–period sampling in
agriculture
Prof. Liping Chen Ph.D, Professor, Director, National Research Center of Iintelligent Equipment for Agriculture (NRCIEA) , China
08:45 – 09:00
Technology innovation issues for smart agriculture
Prof. Qin Zhang Ph.D, Professor, Director, Center for Precision & Automated Agricultural Systems, Washington State University, USA
09:00 – 09:15 Prof. Wenju Yun Ph.D, Professor, China Agricultural University
09:15 – 09:30
Research Trends of ICT–based Smart Agriculture in Korea
Prof. Sun–OK Chung Ph.D, Associate Professor, Department Head, Department of Biosystems Machinery Engineering, Chungnam National University, ROK
09:30 – 09:45
Application of WSN in precision agriculture
Prof.Minzan Li Ph.D, Professor,Director, Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, P.R. China (CAU)
09:45 – 10:00 Precision agriculture re–defined
Mr. Marc Vanacht Principal of AG Business Consultants, Consultant on Precision Agriculture, USA
10:00-10:15 Tea Break
2. Session II: Collaborative innovation and key technology on smart agriculture Part B
Location: Room 308, the 3rd floor of CNCC
Moderator: Prof. Chunjiang Zhao, Director, National Engineering Research Center for
Information Technology in Agriculture (NERCITA)
Time Technical Presentations
10:15 – 10:30
A precise WSN system for managing CO2 fertilizer in greenhouse
Dr. Man Zhang
Ph.D, Associate Professor, Key Laboratory of Modern Precision Agriculture
System Integration Research, Ministry of Education, P.R. China (CAU)
10:30 – 10:45
The future of precision farming: Designing systems for the farm of
tomorrow
Prof. Samuel Wane
Senior Lecturer, Harper Adams University, UK
10:45 – 11:00
A New framework for automatic cotton foreign fiber detection by
computer vision
Dr. Zhenbo Li
Ph.D, Associate Professor, China Agricultural University
11:00 – 11:15
Non–destructive sensing technology in food and agricultural
applications – challenges and opportunities
Dr. Ning Wang
Ph.D, Professor, Department of Biological and Agricultural Engineering,
Kansas State University , USA
11:15 – 11:30
A Remote monitoring system Of aquaculture design based on android
and Zigbee
Prof. Xingqiao Liu
Professor, Jiangsu University
11:30 – 11:45
Advances in precision monitoring and control of animal production
environment
Prof. Linying Zhao
Ph.D, Professor, The Ohio State University, USA
11:45 – 12:00
Network computing in agriculture information system Dr. Haihui Zhang
Ph.D, Associate Professor, Vice Dean Northwest Agriculture & Forest
University (NAFU)
ORAL PRESENTATIONS
SEPTEMBER 18, 2014
THURSDAY AFTERNOON
13:30-16:00
1. Session III: Product Development and marketing on smart agriculture Part A
Location: Room 308, the 3rd floor of CNCC
Moderator: Prof. Minzan Li, Ph.D, Professor,Director of Key Laboratory of Modern Precision
Agriculture System Integration Research, Ministry of Education
Time Technical Presentations
13:30 – 13:45
Application of GIS in the seed industry
Prof. Xiaodong Zhang Ph.D, Professor, Vice Dean of College of Electrical Engineering, China Agricultural University
13:45 – 14:00 Multifactor environmental warning model in swine culture
Prof. Ruizhi Sun Ph.D, Professor, China Agricultural University
14:00 – 14:15 The wisdom agriculture and intelligent agriculture in the China
Prof. Yifei Chen Ph.D, Professor, China Agricultural University
14:15 – 14:30 Distributed energy supply of agricultural information system
Dr. Tianjun Jing Ph.D, Assistant Professor, China Agricultural University
14:30–14:40 Hebi Agricultural SiliconValley, China
14:40–14:50 Tianjin Green Kenon Co. Ltd 14:50–15:00 National Modern Agricultural Demonstration Area in Hutubi, Xinjiang
15:00-15:15 Tea Break
2. Session III: Product Development and marketing on smart agriculture Part B
Location: Room 308, the 3rd floor of CNCC
Moderator: Prof. Haijian Ye, Ph.D, Professor, Vice Dean of College of Electrical Engineering,
China Agricultural University
Time Technical Presentations
15:15–15:25 Internet of Things for Intelligent Manor in Lincang, Yunnan
15:25–15:35 National Modern Agriculture Park of Comprehensive Agricultural
Development in Baoshan, Yunnan 15:35–15:45 Yunnan Coffee Trading Center
3. Concluding Remarks and vision for the future (15:45-16:00)
Location: Room 308, the 3rd floor of CNCC
Summarizer: Prof. Wanlin Gao, Dean of College of Information and Electrical Engineering, China
Agricultural University
185
SESSION VII
POSTER SESSIONS
SEPTEMBER 18, THURSDAY
08:30 - 12:00
Topic (1) Sensing and traceability for quality and safety of agro-products
No. Poster # Paper # Paper Titles Name & Institution Country
121 71-001 0508-021
Efficiency Evaluation of Magnetic Nanoparticles Separation using an Automatic Nucleic Acid Isolation
System
Qin JiangKey Laboratory of
Agricultural information acquisition technology, Ministry of Agriculture
Belgium
122 71-002 0509-009 Detecting Glucose in Honey Using Polymer-based Enzyme Biosensors
Fu YingchunCollege of Biosystems Engineering and Food
Science, Zhejiang University
China
123 71-003 0526-029 Detection of the Contents of Winter Wheat Based on LVF
Zhao YongBeijing Research Center for Information Technology in
Agriculture
China
124 71-004 2014-0375
The Application of Variable Selection Methods in Model
Optimization for Assessing Sugar Content in Chestnut Using Near
Infrared Spectroscopy
Liu JieHuazhong Agricultural
UniversityChina
125 71-005 2014-0688
Technology Based on Multi-spectral Studies of Corn Nitrogen
Luo YuanliNortheast Agricultural
UniversityChina
126 71-006 2014-1010
Rapid Detection of Trace Chlorpyrifos Pesticide Residues
Based on Colorimetric Spectroscopy and SVM
Li WenMinistry of Education Key
Laboratory of Modern precision agricultureSystem Integration Research, China
Agricultural University
China
127 71-007 2014-1011
A Review on Colorimetric Detection of Mercury in Water
Using Gold Nanoparticles
Wu QiongyanCollege of Information and
Electrical Engineering, China Agricultural University
China
128 71-008 2014-1012
Study on the Optical Non-destructive Quality Detection Method of Mini-watermelon
Zhang DiDepartment of Signal and
Information Processing,China Arguriculture University
China
186
129 71-009 2014-1186
Maize Seeds Authenticity Identification using Near-Infrared Spectroscopy and Chemometrics
Jia ShiqiangCollege of Information
and Electrical Engineering, China Agricultural
University
China
130 71-010 2014-1293
A Review on Magnetophoretic Immunoseparation
Lin JianhanAgricultural Information Acquisition Technology Key Lab of Ministry of
Agriculture of China, China Agricultural University
China
131 71-011 2014-1294
An Impedance Detector for Impedance Measurement and
Data Analysis of Interdigitated Array Microelectrode for Rapid
Detectionof Avian Influenza Virus
Lin JianhanAgricultural Information Acquisition Technology Key Lab of Ministry of
Agriculture of China, China Agricultural University
China
132 71-012 2014-1295
Development and Evaluation of a Nanoscale Magnetic Particle
Based Bioseparator for Specific Separation and Concentration of E
Coli O157:H7
Lin JianhanAgricultural Information Acquisition Technology Key Lab of Ministry of
Agriculture of China, China Agricultural University
China
133 71-013 2014-1400
Detection of the Contents of Winter Wheat Based on the Portable JDSU
Spectrometer
Zhao YongBeijing Research Center for Information Technology in
Agriculture
China
134 71-014 2014-1411
The Application of Infrared Thermography for Crop Detection
Li ZhenCollege of Information
Science and Technology, Agricultural University of
Hebei
China
135 71-015 2014-1418
Study on Vegetable Freshness Detection Based on the Portable
LVF Spectrometer
Yu XiaoyingCollege of information science and technology,
Agricultural University of Hebei
China
136 71-016 2014-1419
Using Hyperspectral Imaging to Detect Predominant Lesion of Rice
Leaf Blast
Ma XuCollege of Engineering, South China Agricultural
University
China
137 71-017 2014-1601
Non-destructive Detection of Insect-infested Jujubes by Near-
infrared Diffuse Reflectance Spectroscopy
Zhan JingJingCollege of
Engineering,Shanxi Agricultural University
China
187
POSTER SESSIONS
SEPTEMBER 18, THURSDAY
13:30 – 17:00
Topic (2) Computer Vision and Image Processing
No. Poster # Paper # Paper Titles Name & Institution Country
1 72-001 0519-002
Design of 3D High-resolution Camera Imaging Measurement System to Estimate the Yield of
Rice Plant
Zhang YuGraduate School of
Agricultural and Life Sciences, University of
Tokyo
China
2 72-002 0519-003The Application of Imaging
Sensing Technology for Precision Agriculture and Green Houses
Zhang YuGraduate School of
Agricultural and Life Sciences, University of Tokyo
China
3 72-003 0618-010
Simultaneous Measurement of Leaf Characteristics and Sclerotinia Lesion Area in
Brassica Napus Based on Image Processing
Lu WenchaoBeijing Research Center for Information Technology in
Agriculture
China
4 72-004 2014-0143
Experiment on Acquisition of The Navigation Information of
The Unmanned Rice Transplanter Based on Machine Vision
Chi DexiaShenyang agricultural
universityChina
5 72-005 2014-0600A Strawberry Harvesting End-
effector with Large Misalignment Tolerance Based on Visual Servoing
Wang Liang JuChina Agricultural
UniversityChina
6 72-006 2014-0650
Extraction and Test of Characteristic Signal for Dynamic
Sugarcane Node Based on Computer Vision
Tang ShuxiChinese Academy of
Agricultural Mechanization Sciences
China
7 72-007 2014-0958Rice Flag Leaf Angle Detection
Method Based on Machine Vision and K-means
Zhai GuoDepartment of
Optoelectronic Engineering, Chongqing University
China
8 72-008 2014-1008
Research of Online Real Time Processing Model for
Fluorescence Image of Electrical Signal in Plant
Li JunCollege of Information
and Electrical Engineering, China Agricultural
University
China
9 72-009 2014-1175Koi Tracking Strategy Based on Color Mixture Model Via
Camshift
Li ZhenboCollege of Information and
Electronic Engineering, China Agricultural University
China
10 72-010 2014-1177Pig Behavior Analysis System
Based on Video Tracking Technology
Li ZhenboCollege of Information and
Electrical Engineering, China Agricultural University
China
188
11 72-011 2014-1180Crab Tracking Using a Biological-
Limit-Based Camshift Guided Particle Filter
Li ZhenboCollege of Information and
Electronic Engineering, China Agricultural
University
China
12 72-012 2014-1203Ripe Strawberry Fruit
Recognition and Positioning Based on Multi-source Images
Zang Li JiaoMinistry of Education,
China Agricultural University
China
13 72-013 2014-1221
Methods of Nondestructive Measurement for Kernel Weight of Maize Based on Multi-source
Image Fusion
Zhou JinhuiCollege of Information
and Electrical Engineering, China Agricultural
University
China
14 72-014 2014-1259Study on Searching for Growth Point of Tomato Axillary bud Based on Image-Processing
Wang MengCollege of Biosystems Engineering and Food
Science, Zhejiang University
China
15 72-015 2014-1277
Methods of Fast Nondestructive Measurement for Yield
Component Traits of Maize Based on Machine Vision
Zhou JinhuiCollege of Information
and Electrical Engineering, China Agricultural
University
China
16 72-016 2014-1303Design Measurement Matrix
of Apple Image Based on Compressed Sensing
Xiao YingCollege of Information
and Electrical Engineering, China Agriculture
University
China
17 72-017 2014-1305Research on Apple Image Sparse Sampling Based on Compressed
Sensing
Xiao YingCollege of Information
and Electrical Engineering, China Agriculture
University
China
18 72-018 2014-1325Study of Image Stitching and Wheat Leaf Extraction Using
UAV Based Multispectral Image
Li HanCollege of Information
and Electrical Engineering, China Agricultural
University
China
19 72-019 2014-1368Estimation Nutrient Content
of Soils by Reflectance Spectroscopy
Hu GuotianMech. & Elect.
Engineering, Northwest A&F University
China
20 72-020 2014-1412Research on Localization Method of Overlapping Apples Based on
Maxima
Hu ChanliSchool of electrical
information engineering, Jiangsu university
China
21 72-021 2014-1506Research on Cotton Image
Segmentation and Extraction for Cotton-picking Robot
Guo HuiCollege of Mechanical and Traffic, Xinjiang
Agriculture University
China
189
22 72-022 2014-1579
Research on Online Achievement Display System Based upon
Image Mosaic for Agricultural Science and Technology
Tao HongyanCollege of Information
and Electrical Engineering, China Agricultural
University
China
23 72-023 2014-1591
Cell Tray Seeding Quantity Estimation of Super Hybrid Rice Based on Machine Vision and BP
Neural Network
Tan SuiyanCollege of Science, Applied Physic Branch, South China
Agricultural University
China
24 72-024 2014-1622
The research of morphological structure analysis of different mice livers based on three-dimensional reconstruction
Tian LijunCollege of Information
and Electrical Engineering, China Agriculture
University
China
Topic (3) Agricultural Information Sensing
No. Poster # Paper # Paper Titles Name & Institution Country
25 73-001 0509-040
A Service Granularity Optimization Design Method
for Soil Moisture Monitoring in Cloud Computing
Li ShuihuaInstitute of Agricultural Resources and Regional
Planning, Chinese Academy of Agricultural
Sciences
China
26 73-002 0618-002
Research on Control Methods of Greenhouse Production System
based on Environment-crop Model
Chen LijunCollege of Information
and Electrical Engineering, China Agricultural
University
Belgium
27 73-003 0618-004The Development of Greenhouse Environment Temperature Data
Collector
Liu KunCollege of Information
and Electrical Engineering, China Agricultural
University
China
28 73-004 0618-005Wireless Remote Measurement
System of Greenhouse Environment
Liu YingCollege of Information
and Electrical Engineering, China Agricultural University
China
29 73-005 0618-006Soil Nitrate-nitrogen
Measurement System based on C805Land and WaterF020
Cao ShushuDepartment of Electronic Engineering ,College of
Information and Electrical Engineering, China
Agricultural University
China
30 73-006 0618-007
Design and Implementation of Wireless Sensor Network Nodes
in Greenhouse environment Monitoring
Chen SiqiDepartment of Electronic
Engineering, China Agricultural University
China
31 73-007 0618-026 Pyrolysis characteristics and kinetics of Phoenix tree residues
Liu LeDepartment of Engineering,
Nanjing Agricultural University
China
190
32 73-008 2014-0120Integrated Sensor System for Rice
Conditions Monitoring Based UGV
Lan YubinSouth China Agricultural
University, Key Laboratory of Key Technology on
Agricultural Machine and Equipment
United States
33 73-009 2014-0199
Intelligent Monitoring and Scheduling Management
Information System of Lingnan Characteristic Fruits
Guo PeipeiGuangzhou Jiankun Network Technology
Development Co., Ltd
China
34 73-010 2014-0316
Study on Nondestructive Monitoring Technology of
Drought Stress Information in the Wheat Seedling Stage
Wu Qiong Shengyang Agricuture University, College of
Information and Eletrical Engineering
China
35 73-011 2014-0394
The Application of Small Unmanned Aerial Systems for Remote Sensing and Scientific
Research: A Review
Yu ShanshanNanjing Agricultural
UniversityChina
36 73-012 2014-0395Classified Aassessment of Chinese
Commercial Manure Composts Using Near Infrared Spectroscopy
Huang GuanqunChina Agricultural
UniversityChina
37 73-013 2014-0599A Low Altitude Remote Sensing
Platform for Small Scale Agricultural Land Investigation
Su BaofengCollege of Mechanical and
Electronic Engineering, Northwest A&F University,
Yangling
China
38 73-014 2014-0676
Research on Monitoring System for Edible Fungi Cultivation
Environment Based on ZigBee Technology
Gao BaihuiNortheast Agricultural
UniversityChina
39 73-015 2014-0689Study on Farmland Irrigation
Remote Monitoring System Based on ZigBee
Li JiaoNortheast Agricultural
UniversityChina
40 73-016 2014-0877
On-site Measurement Cadmium and Lead in Soil Using a
Disposable Bismuth/Ionic Liquid Modified Electrochemical Sensor
Wang Zhiqiang,Key Lab of Modern
Precision Agriculture System Integration
Research, Ministry of Education of China, China
Agricultural University
China
41 73-017 2014-0966Modeling of Influences on ISE-based Soil Slurry Measurement
Using Response Surface Analysis
Pan PuKey Laboratory of Modern
Precision Agriculture System Integration Research,
Ministry of Education, China Agricultural University
China
42 73-018 2014-1013Design of Crop Water Monitoring
System Based on Multi-sensor and Physiological State
Wang YongqianCollege of Information
and Electrical Engineering, China Agricultural University
China
191
43 73-019 2014-1043A WSN System for Monitoring Environment and Crop Growth Information in Grassy Ranch
Zhan ManKey Laboratory of Modern
Precision Agriculture System Integration Research, Ministry of Education, China
Agricultural University
China
44 73-020 2014-1085Research on Electrical Resistivity
Tomography for Mapping the Root Zone in Soil
Wang ZhijieCollege of Information
and Electrical Engineering, China Agricultural
University
China
45 73-021 2014-1108The Network Connectivity of
Wireless Sensor Networks under the Environment of Farmland
Chen YangCollege of Information and Electrical Engineering,
China Agricultural University
China
46 73-022 2014-1322
Regression-assisting with External Variable for Predicting
Soil Organic Matter in a Complex Terrain Zone
Ye HuichunKey laboratory of Digital Earth Science, Institute of
Remote Sensing and Digital Earth, Chinese Academy of Sciences, Beijing 100094,
China
China
47 73-023 2014-1407
Application of Artificial Neural Network in Soil Available
Potassium Monitoring using a Dual-sensor System
Zhang MiaoKey Laboratory on Modern
Precision Agriculture System Integration
Research of Ministry of Education, China
Agricultural University
China
Topic (4) Precision Agriculture and Intelligent Instrument
No. Poster # Paper # Paper Titles Name & Institution Country
48 74-001 0519-008
Research of Radio Channel Model Oriented to Agricultural
Greenhouse Wireless Sensor Network
Yang GuangyouAgricultural Machinery
Institute, Hubei University of Technology
China
49 74-002 2014-0156Headland Turning Control Method
of Autonomous Agricultural Machine
Huang PeichenSouth China Agricultural
UniversityChina
50 74-003 2014-0265 A Multi-robot Following System Based on Stereovision
Yang FuzengNorthwest A&F Universit China
51 74-004 2014-0271Research and Design of
Agricultural Multi-robot Wireless Communication Platform
Yang FuzengNorthwest A&F University China
52 74-005 2014-0272Research on Agricultural Robot Platform and Control System
Design
Yang FuzengNorthwest A&F University China
192
53 74-006 2014-0314Propagation Characteristics of Rradio Wave in Plastic
Greenhouse
Wang JizhangJiangsu University China
54 74-007 2014-0349Intelligent Facilities Fishpond
Design of Breeding Schizothorax Prenanti
Zou ZhiyongSichuan Agricultural
UniversityChina
55 74-008 2014-0425 Automatic Navigation System Research for Rice Planter
Wei LiguoChinese Academy of
Agricultural Mechanization Sciences
China
56 74-009 2014-0534
Network Information Technology-based Information Service Platform of Agricultural
Machinery
Liu YangchunChinese Academy of
Agricultural Mechanization Sciences, Beijing 100083,
China
China
57 74-010 2014-0541
Sliding-Mode Variable-Structure Control of Agricultural machinery
Based On Exact Feedback Linearization
Bai XiaopingKey laboratory of Industrial
Informatics, Shenyang Institute of Automation
Chinese Academy of Sciences, Shenyang
110016, China
China
58 74-011 2014-0579 Research on Fuzzy Self-adjusting PID for Quadrocopter
Liu HaopengCollege of Engineering
& Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070,
P.R.China
China
59 74-012 2014-0829 Design of a Portable Detector for Soil Organic Matter Measurement
Niu Yaliang Shanxi Agricultural
UniversityChina
60 74-013 2014-0855
Design and Experiment of A Vegetable Grafting Machine Operated by One Person for Cucurbitaceous Seedlings Cultivated in Humus Pots
Chu JiaCollege of Engineering,
China Agricultural University
China
61 74-014 2014-0964Design of a Soil Macronutrient Detection Platform Based On Fluidic Control Technology
Ren HaiyanKey Laboratory on Modern
Precision Agriculture System Integration
Research of Ministry of Education, China
Agricultural University
China
62 74-015 2014-0998Design of Portable Multi-channel System for Physiological Signal
Acquisition
Li TingCollege of Information and Electrical Engineering,
China Agricultural University, Beijing 100083,
China
China
193
63 74-016 2014-1042
Detection Algorithm of Crop Baseline for Off-road Vehicle
Based on Boundary Detection and Scan-filter
Zhan ManKey Laboratory of Modern
Precision Agriculture System Integration Research, Ministry of Education, China
Agricultural University
China
64 74-017 2014-1092An Automation System for Oestrus Detection in Group
Housed Sows
Zhang HaoCollege of Information
and Electrical Engineering, China Agricultural
University
China
65 74-018 2014-1105 Research of Self-learning Navigation Patrol Robot System
Xu BoDepartment of Mechatronic
Engineering, College of Engineering, China
Agricultural University, Beijing, China
China
66 74-019 2014-1107 The Measure Method of Steering Angle for Agricultural Vehicle
Zhang ZhigangKey Laboratory of Key
Technology on Agricultural Machinery and Equipment,
Ministry of Education, South China Agricultural
University
China
67 74-020 2014-1116
Research Status and Prospects of Cleaning Loss Detection Technology On Harvesting
Machine
Wang SuzhenNanjing research
institute for agriculture Mechanization, Ministry of
Agriculture
China
68 74-021 2014-1127
Development of Glass Microelectrodes Pipette Puller
Based on Monitoring and Controlling Heating Strength
Wang YuanCollege of Information and Electrical Engineering,
China Agricultural University
China
69 74-022 2014-1347
Discrimination of Phosphorus in Lettuce using VIS-NIR
Spectroscopy Combined with Characteristic Variables Selection and Extreme Learning Machine
Gao HongyanKey Laboratory of Modern
Agricultural Equipment and Technology, Ministry of Education & Jiangsu
Province, Jiangsu University
China
70 74-023 2014-1422 An Approach to Crop Location for Robotic Intra-row Weeding
Li NanCollege of Engineering,
China Agricultural University
China
71 74-024 2014-1541Design of Navigation Monitoring
Software Based on WinCE for Agricultural Vehicle
Zhang YajiaoEngineering College,
South China Agricultural University, Guangzhou
510642, China
China
194
72 74-025 2014-1577 Research and Design of a Pig Farm Management System
Dong ZhiwenCollege of Information
and Electrical Engineering, China Agricultual
University
China
73 74-026 2014-0201Defining Fertilization
Formulations (N-P-K) for Crops Using A Computer Application
Arturo Chong Eslava Autonomous University of
ChapingoMexico
Topic (5) Decision Support Systems and Artificial Intelligence
No. Poster # Paper # Paper Titles Name & Institution Country
74 75-001 0509-001Research on Intelligent
Greenhouse Remote Control System Based on VC++ 6.0
Wang JunCollege of Biological and Agricultural Engineering,
Jilin University
China
75 75-002 0514-001Simulation of Temperature Model and Energy Management for Solar
Greenhouse
Li LiKey Laboratory on Modern Precision Agriculture System
Integration Research of Ministry of Education, China
Agricultural University
China
76 75-003 0514-012
Management of Agricultural Plastic Waste Fluxes by Means of Specifically Designed Information
System
Evelia SchettiniDepartment of Agricultural and Environmental Science DISAAT – University of Bari
Italy
77 75-004 2014-0034
Analysis of Calves Feed Intake and Rumen Growth Based on
Process Date of A Multi Sensor Feeding System
Viktoria EhrlTechnische Universitaet Muenchen, Agricultural
Systems Engineering
Germany
78 75-005 2014-0330
Research of the Early Warning Model of the Facility Agriculture
Disease and Insect Based on Rough Neural Network
Wang DengweiNational Engineering Research Center for
Information Technology in Agriculture
China
79 75-006 2014-0608Research on Augmented Reality Plant Growth Simulation Method
Based on NyARToolkit
Zhao PengfeiNational Engineering Research Center for
Information Technology in Agriculture
China
80 75-007 2014-0979Error Analysis and Correction
Method for Automatic Monitoring Data of Soil Moisture
Hao Xingyao National Engineering Research Center for
Information Technology in Agriculture
China
81 75-008 2014-1006
Multimedia Training System Based on the Gesture-recognition
Operation and User Behavior Analysis
Tian YuxuanCollege of Information and
Electronic Engineering, China Agricultural
University
China
195
82 75-009 2014-1019
The Measurement of Liquid viscous Coefficient Based on the Metal Induction Falling Sphere
Method
Lu WeiCollege of Engineering,
Nanjing Agricultural University
China
83 75-010 2014-1021The Diagnosis Method of the
Corn's Water Shortage Based on the Vibration Information
Lu WeiCollege of Engineering,
Nanjing Agricultural University
China
84 75-011 2014-1045The Fault Diagnosis Expert System for the IOT in the
Aquaculture
ChenYingyiCollege of information and
Electrical Engineering, China Agricultural
University
China
85 75-012 2014-1046Quick and Automatic Generation Method for the Evaluation Report
of the Small Hydro Project
ChenYingyiCollege of information and
Electrical Engineering, China Agricultural University, Bejing
100083,P.R. China
China
86 75-013 2014-1047
Focused Crawler-Based Smart Push Technology for Market
Information of Ten agricultural Industry Platform
Chen YingyiCollege of information and
Electrical Engineering, China Agricultural University, Bejing
100083,P.R.China
China
87 75-014 2014-1048
The Simulation System for Ecosystem of Fish-Vegetable Mutualism Based on Discrete
Algorithm
Chen YingyiCollege of information and
Electrical Engineering, China Agricultural
University,
China
88 75-015 2014-1049
Design and Implementation of the Management and Evaluation System for Small Hydropower
Substitute Fuel Project
Chen YingyiCollege of Information
and Electrical Engineering, China Agricultural
University
China
89 75-016 2014-1050
A Feeding Mathematical Model to Estimate Feeding Requirement of Fugu Rubripes (Temmincket
Schlegel)
Chen YingyiCollege of information and
Electrical Engineering, China Agricultural
University
China
90 75-017 2014-1051
Aquaculture Access Control Model in Intelligent Monitoring and Management System Based
on Group/Role
ChenYingyiCollege of Information
and Electrical Engineering, China Agricultural
University
China
91 75-018 2014-1176Design and Implementation of
Monitoring System of Agricultural Prices
Li ZhenboCollege of Information
and Electrical Engineering, China Agricultural
University
China
196
92 75-019 2014-1265An Intelligent and Accurate
GNSS-controlled Land Leveling System and Related Experiments
Li XiaoKey Laboratory of Modern
Precision Agriculture System Integration Research, Ministry of Education China
Agricultural University
China
93 75-020 2014-1270
Research on Power Quality Monitoring and Evaluation
System Based on OSGi Framework
Gao Wanlin College of Information
and Electrical Engineering, China Agricultural
University
China
94 75-021 2014-1288The Realization of Real-time
Navigation Technology in GNSS-controlled Land Leveling System
Wang YanKey Laboratory for Modern
Precision Agriculture System Integration Research, Ministry of Education, China
Agricultural University
China
95 75-022 2014-1327Healthy Mouse: a New Method of Monitoring Human Physiological Signs Information in Real Time
Sun Ping College of Information
and Electrical Engineering, China Agricultural
University
China
96 75-023 2014-1433Research and Design of Programming problem
Automatically Evaluation System
Li Jing College of Information
and Electrical Engineering, China Agricultural
University
China
97 75-024 2014-1525Research and Application on Slope Land Leveling Method
Based on GNSS
Liu GangKey Laboratory of Modern
Precision Agriculture System Integration Research, Ministry
of Education China Agricultural University
China
98 75-025 2014-1574Research on Investment and
Financing Ways for Agricultural High and New Technology
Wang ShuanglingCollege of Information
and Electrical Engineering, China Agricultural
University
China
99 75-026 2014-1575
Research on Personalized Achievement Recommendation System for Agricultural Science
and Technology
Tao HongyanCollege of Information
and Electrical Engineering, China Agricultural
University
China
100 75-027 2014-1580
Research on Online Evaluation System for Technology
Perspectivein Agricultural Science and Technology Achievements
Wang ShuanglingCollege of Information
and Electrical Engineering, China Agricultural
University
China
197
101 75-028 2014-1620Tracking and Positioning
Technology for Free-range Livestock
Lei HongzhouCollege of Information
and Electrical Engineering, China Agricultural
University
China
102 75-029 2014-1633
Online Assessment System:A New Approach to Evaluating
Agricultural Technological Achievements
Ren YanzhaoCollege of Information
and Electrical Engineering, China Agricultural
University
China
Topic (6) The Application of Mobile Communication Terminal in the Agricultural Informatics
No. Poster # Paper # Paper Titles Name & Institution Country
103 76-001 0618-058
The solution of agricultural products traceability system
based on the Internet of things technology and cloud computing
platform
Lu ChanghuaInstitute of Veterinary
Medicine, Jiangsu Academy of Agricultural Sciences, Key
Laboratory of Veterinary Biologicals engineering
and technology, Ministry of Agriculture, National Center for Engineering Research of
Veterinary Bio-products
China
104 76-002 2014-0593
Supply Chain Traceability System Platform Development about
Agricultural Products Based on NFC
Sun XuKey Laboratory of Bionic Engineering of Ministry of Education Jilin University,
Changchun Jilin China
China
105 76-003 2014-0957
Rapid Non-destructive Measurement of Wheat Spike Characteritics Using Android
Smartphone
Lu WenchaoBeijing Research Center for Information Technology in
Agriculture
China
106 76-004 2014-1009Research on Identification
Technology of Chinese-sensible Code Based on Smart Phone
Guo HaitaoCollege of Information and
Electrical Engineering, China Agricultural University
China
107 76-005 2014-1030 QoE-aware Smartphone-based Surveillance Video Transmission
Ling WenjingCollege of Information
and Electrical Engineering, China Agriculture
University
China
108 76-006 2014-1188The Research of Massive Data Processing of the Internet of
Things on Livestock and Poultry
Chen NanxinCollege of Information
and Electrical Engineering, China Agricultural
University
China
109 76-007 2014-1195Big Data: Challenges and
Opportunities for Smart Grids and Smart Meters
Gao WanlinCollege of Information
and Electrical Engineering, China Agricultural University
China
198
110 76-008 2014-1312 Mobile Health Sensing Ubiquitous Service : System and Pattern
Sun WenxiaCollege of Information
and Electrical Engineering, China Agricultural
University
China
111 76-009 2014-1324
Intelligent Farm for Relaxation Based on Internet of Things:
Management System and Service Mode
Yu LinaCollege of Information
and Electrical Engineering, China Agricultural
University
China
112 76-010 2014-1326
A Content Management System Which is Based on
SOA Architecture and Can Be Customized
Wang ShiqiangCollege of Information
and Electrical Engineering,China
Agricultural University
China
113 76-011 2014-1329An Idea to Capture the Big Data
on the Area of Nutrition and Health based on Data Capture
Sun PingpingCollege of Information
and Electrical Engineering,China
Agricultural University
China
114 76-012 2014-1390An Approach to Online Document
Management for Information Resources
Wang JieCollege of Information
and Electrical Engineering, China Agricultural
University
China
115 76-013 2014-1391
Mobile Psychology Sensing Expert System: A New Way to
Make Psychology Accessible to Chinese People
Sun WenxiaCollege of Information
and Electrical Engineering, China Agricultural
University
China
116 76-014 2014-1392
An On-line Intelligent Measurement Terminal of Live
Pigs’ Backfat Thickness Based on Ultrasonic
Luo XuanCollege of Information
and Electrical Engineering, China Agricultural
University
China
117 76-015 2014-1393Research and Development on
WBAN’s Vital Signs Monitoring Device
Su YuCollege of Information
and Electrical Engineering, China Agricultural
University
China
118 76-016 2014-1477OFIS Data Exchange Platform
for Interaction with Agricultural Information Systems
Kim, JoonYongDepartment of Biosystems
Engineering, Seoul National University
Korea
119 76-017 2014-1542
Research and Implementation on Online Evaluation System for
Achievements in Agricultural Science and Technology
Jin YanyunCollege of Information
and Electrical Engineering, China Agricultural
University
China
199
120 76-018 2014-1551An Acoustic Signal Acquisition
and Processing System Based on LabVIEW
Han MengCollege of Information
and Electrical Engineering, China Agricultural
University
China
121 76-019 2014-1553
Based on the Study on the Agricultural Technology Service
of Network Technology and Discussion
Zhao LongInformation system
integration research and development center, China
agricultural university
China
122 76-020 2014-1555Agricultural Expert Network
Technology Research and Discussion on Service Delivery
Xin CuihongDepartment of Engineering,
China Agricultural University
China
123 76-021 2014-1557
Research and Implementation of Agricultural Science and
Technology Achievements Online Management
Gao ZhengDepartment of Engineering,
China Agricultural University
China
124 76-022 2014-1564
Research and Discussion on Agricultural Information Service
Modes Based on Network Technology
Shi KaiteCollege of Information
and Electrical Engineering, China Agricultural
University
China
125 76-023 2014-1568
Research and Implementation of the Investment and Financing System Based on Agricultural
Science and Technology Network
Gao YujiaDepartment of Engineering,
China Agricultural University
China
126 76-024 2014-1571
Study On Industry-University-Research Collaboration Mode
Based On Network Technology In Agriculture
Wang ShuhuiCollege of Information
and Electrical Engineering, China Agricultural
University
China
127 76-025 2014-1572Study and Discuss on the
Agricultural Trading Service Based on Network Technology
Gao WanlinDepartment of Engineering,
China Agricultural University
China
128 76-026 2014-1573
Research and Implementation of Agricultural Technology Supply And Demand Docking Services
System Based on Network Technology
Gao WanlinDepartment of Engineering,
China Agricultural University
China
129 76-027 2014-1634Study on Water Resources
Professional Softwaredevelopment in Cloud Computing Environment
Jiang XinlanCollege of Information
and Electrical Engineering, China Agricultural
University
China
200
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION VIII
AGRICULTURAL MACHINERY STANDARDIZATION
201
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the
Delegates Access Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 1. Keynote Speeches Location: 302B,CNCC
15:00-15:15 Tea Break
15:15-17:15 1. Keynote Speeches Location: 302B,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical Oral Presentation
Technical Presentation Location: 302B,CNCC
10:00-10:15 Tea Break
10:15-12:00 Technical Oral Presentation
Technical Presentation Location: 302B,CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
Thursday, Sept. 1816:00-17:00 Closing Ceremony
Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
Overview of Session VIII: Agricultural Machinery Standardization
202
OPENING CEREMONY OF SESSION VIII,
AGRCULTURAL MACHINERY STANDARDIZATION
18TH WORLD CONGRES OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-17:15
Location: Room 302B, the 3rd floor of CNCCChair: Prof. Xiansheng Zhang,
13:30-14:00 Opening speech by Prof. Xiansheng Zhang
Keynote Speeches
Time Paper # Technical Presentations
14:00-14:30 0826-801Mutual recognition of internationalization of agricultural machinery Mr. Darrin DrollingerAmerican Society of Agricultural and Biological Engineers, USA
14:30-15:00 0826-802
The growing importance of regulations on crop protection equipment and the role of standards the case of EuropeMr. Jean-Christophe RousseauBerthoud, France
15:00-15:15 Tea Break
Location: Room 302B, the 3rd floor of CNCCChair: Mr. Darrin Drollinger,
Time Paper # Technical Presentations
15:15-15:45 0826-803Chinese agricultural machinery mechanization Prof. Xiansheng ZhangChinese Academy of Agricultural Mechanization Science, China
15:45-16:15 0826-804Building a performance based approachMr. Randall Joseph RenzeJohn Deere, USA
Assistant President of Chinese Academy of Agricultural Mechanization Sciences, China
Executive Diretor of American Society of Agriculturaland Biological Engineers, USA
203
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-12:00Technical Presentations
Location: Room 302B, the 3rd Floor of CNCCChair: Mr. Darrin Drollinger,
16:15-16:45 0826-805Tailoring in international standardsMr. Eric B SmithJohn Deere, USA
16:45-17:15 0826-806Combination of standardization and testing in agricultural machinery Mr. Ibrahim SalehMacDon Industries, Canada
Time Paper # Technical Presentations
08:30-08:50 2014-0609
Parameter optimization of corn ear vertical drying based on the BP neural network and genetic algorithm Wuyun ZhaoGansu Agricultural University, China
08:50-09:10 2014-1332
Experimental study on constant pressure control based on PWM variable spray Jiachen ZhangBeijing Research Center for Information Technology in Agriculture, China
09:10-09:30 2014-0255Effect of soil parameters on performance of tillage machinesMehrez basharSouth China Agricultural University
09:30-09:50 2014-0457
Hydro-mechanical transmit performance analysis for a continuously variable transmissionLiang HeNanjing Agricultural University, China
10:00-10:15 Tea Break
Location: Room 302B, the 3rd Floor of CNCCModerator: Mr. Xiansheng Zhang,
Time Paper # Technical Presentations
10:15-10:35 2014-0544
Modeling agricultural tractor motion on sloping ground considering longitudinal and lateral gradientsZhen LiKyushu University, Japan
Executive Director of American Society of Agricultural and Biological Engineers, USA
Assistant President of Chinese Academy of Agricultural Mechanization Sciences, Beijing, China.
204
10:35-10:55 2014-0197
The simulation study of vehicle Hydro-Mechanical continuously variable transmission test based on AVLJiangguo Xi
Henan University of Science and technology, China
10:55-11:15 0618-030Investigation on vibration characteristic of hand tractorSovatna PhonKyushu University, Japan
11:15-11:35 2014-0898
Vertical vibration measurement of the operator seat in an agricultural tractorTheodoros A. GialamasTechnological Educational Institute of Thessaly, Greece
11:35-11:55 2014-0192Sensor controlled crop compaction in case of silage bagging Gerd-Christian MaackInstitut für Landtechnik University of Bonn, Germany
205
SESSION VIII
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
13:30 - 17:00Topic (1) Safety, Energy, Saving and Emission of Agricultural Machinery
Topic (2) Standardization and Combination of Agronomics and Agricultural Machinery
Topic (3) Combination of Standardization and Testing in Agricultural Machinery
No. Poster # Paper # Paper Titles Name & Institution Country
123 81-001 2014-1605Institutional Obstacles for
Standardization in China : A Case Study for Agricultural Machinery
Huang Caijin China Agricultural Machinery Testing
Center
China
124 81-002 2014-0734High Dynamic Control of A Permanent-
magnet Synchronous Motor for Agricultural Electric Vehicles
Ji JinghuaSchool of Electrical
and Information Engineering, Jiangsu University, Zhenjiang
China
125 81-003 2014-0502Resistance power experiment study for excavating-shovel of corn root stubble
excavating and placement harvester
Yu YonghongJiamusi University China
NO. Poster # Paper # Paper Title Name & Institution Country
126 82-001 2014-1130 Design and Experiment of Pneumatic Precision Millet Seed-metering Device
Zhao XiaoshunCollege of Mechanical
and Electrical Engineering,
Agricultural University of Hebei
China
No. Poster # Paper # Paper Titles Name & Institution Country
127 83-001 2014-0024
Stability and Reliability Analysis of Valve-Controlling Hydraulic Power
System for Flexible Pesticide Sprayer Chassis
Zhang HuaCollege of Mechanical
and Electronic Engineering, Nanjing Forestry University
China
128 83-002 2014-0725The Research of Getting Ecological
Hydraulic Circuits of Agricultural and Forestry Tractors
Tkac ZdenkoDepartment of Transport and
Handling, Faculty of Engineering,
Slovak University of Agriculture in Nitra,
Nitra, Slovakia
Slovakia
206
129 83-003 2014-0978 The Current Situation of Testing Standards for Small Wind Turbine
Yao MingCollege of Engineering and Power Engineering
Inner Mongolia University of Technology
China
130 83-004 2014-0992 Rapid Modeling Method of Small Wind Turbine Blade
Li HengCollege of Engineering and Power Engineering
Inner Mongolia University of Technology
China
131 83-005 2014-1125An Optimization Solution of Tractor-
plough System Taking Additional Weight Based on NSGA- Ⅱ
Liu MengnanCollege of Vehicle and
Traffic Engineering, Henan University
of Science and Technology
China
132 83-006 2014-1337The Influence of Panax Notoginseng Seed Particles on Measurement of
Suspension Velocity
Gao XiaojunFaculty of Modern
Agricultural Engineering,
Kunming University of Science and
Technology
China
Topic (4) Mutual Recognition of Internationalization of Agricultural Machinery
No. Poster # Paper # Paper Titles Name & Institution Country
133 84-001 2014-0597The Ride Comfort Analysis of Corn
Harvester-based on the Total Value of Ride and Vibration Dose
Zhou LinChina Agricultural
Mechanization Institute of Science
China
134 84-002 2014-1118Study on Evaluation of Rough
Processing Mechanization Degree of Main Agricultural Products in China
Liu QingInstitute of Agro-
Products Processing Engineering,
Chinese Academy of Agricultural
Engineering
China
135 84-003 2014-1121Construction of Agricultural Product Primary Processing Mechanization
Level Evaluation Index System
Wei QingCollage of Engineering,
China Agricultural University
China
136 84-004 2014-1563 Study on the Technical Regulation of Alfalfa Hay Mechanized Harvesting
Wu BeiChina Agricultural
UniversityChina
207
THE 18TH WORLD CONGRESS OF CIGR
SESSIONS OF CONGRESS
SESSION IX
ASIA FORUM
208
Monday, Sept. 15 08:00-20:00
Registration Location:the open place on the 1st floor near the Delegates
Access Gate C2, CNCC
Tuesday, Sept. 16
09:30-10:00 Opening Ceremony Location:Plenary Hall B, CNCC
10:00-10:10 Tea Break
10:10-12:30 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC
12:30-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC
15:00-15:15 Tea Break
15:15-16:45 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC
19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC
Wednesday, Sept. 17
08:30-10:00 Technical Oral Presentation
Small-scale Agricultural Mechanization Location: 302A,CNCC
10:00-10:15 Tea Break
10:15-12:00 Technical Oral Presentation
Small-scale Agricultural Mechanization Location: 302A,CNCC
12:00-13:30 Lunch Location:Plenary Hall A, CNCC
13:30-15:00 AAAE 25th Executive Council MeetingLocation: 302A,CNCC
15:00-15:15 Tea Break
15:15-16:50 AAAE 25th Anniversary Celebration (Asia Summit)Location: 302A,CNCC
16:50-17:00 Session Closing Ceremony Location: 302A,CNCC
19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre
Thursday, Sept. 1816:00-17:00 Closing Ceremony
Location:309A+B, CNCC
19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC
Friday, Sept. 19 08:00-15:00 Technical Tours
Overview of Session IX: Asia Forum
209
OPENING CEREMONY OF SESSION IX
ASIA FORUM
18TH WORLD CONGRESS OF CIGR
ORAL PRESENTATIONS
SEPTEMBER 16, 2014
TUESDAY AFTERNOON
13:30-16:45
Location: Room 302A, the 3rd Foor of CNCCChair: Prof. Lanfang Zhang,
13:30-13:40 Opening speech by Prof. Lanfang Zhang13:40-13:50 Remarks by Mr. Yoshisuke Kishida, Vice President of AAAE, President of Shin- Norinsha Co., Ltd., Japan13:50-14:00 Address by Dr. Zhongli Pan, Vice President of AAAE, Department of Biological and Agricultural Engineering, University of California, Davis
Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Vilas M. Salokhe,
Technical Presentations
Keynote Speeches
Time Paper # Technical Presentations
14:00-14:30 0618-076
Agricultural mechanization in India: lessons for developing countries
Prof. Gajendra SinghFormer President of ISAE, Professor of Indian Agricultural research Institute (IARI), India
14:30-15:00 0526-034
Biomimetic techniques in agricultural machinery
Prof. Jin TongVice President of CSAE, China, Director of the Key Laboratory for Terrain-Machine Bionics Engineering, Ministry of Education, China; Professor of School of Biological and Agricultural Engineering, Jilin University, China
Secretary General of AAAE, Deputy Director of Department of International Cooperation, Chinese Academy of Agricultural Mechanization Sciences, China
President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India
210
15:00-15:15 Tea Break
Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Haile Ma,
Location: Room 302A, the 3rd Floor of CNCCChair: Mr. Yoshisuke Kishida,
Time Paper # Technical Presentations
15:15-15:45 0618-103
Remote sensing of plant phenotyping and vegetation functioning-from cell to canopy and from 2D to 3DProf. Kenji OmasaProfessor of Graduate School of Agricultural and Life Sciences, the University of Tokyo, Japan
15:45-16:15 2014-0141
Proximal sensing of hidden plant parts using radarProf. Peter Schulze LammersFormer President of EurAgEng, Rheinische Friedrich-Wilhelms-Universität Bonn, Germany
16:15-16:45 0826-901
Aerodynamic and energy engineering in agricultureProf. In-Bok LeeProfessor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea
SEPTEMBER 17, 2014
WEDNESDAY MORNING
08:30-11:30
Small-scale Agricultural Mechanization
Keynote Speeches
Time Paper # Technical Presentations
08:30-09:00 0826-902
Agriculture mechanization in KoreaProf. Sang Hun KimPresident of the Korean Society for Agricultural Machinery and Professor of Department of Biosystems Engineering, Kangwon National University, Korea
09:00-09:30 0826-903
Agricultural mechanization in the Asia: status and issuesDr. Peeyush SoniVice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand
Vice President of AAAE, Professor and President of School of Food and Biological Engineering, Jiangsu University, China
Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan
211
10:00-10:15 Tea Break
Location: Room 302A, the 3rd Floor of CNCCModerator: Dr. Peeyush Soni,
Location: Room 302A, the 3rd Floor of CNCCModerator: Mr. Yoshisuke Kishida,
Small-scale Agricultural Mechanization
Oral Presentations
Time Paper # Technical Presentations
09:30-09:45 2014-1131
A sensor-based light trap system for an early warning system in pest surveillanceDr. Chan Chee WanMalaysian Agricultural Research and Development Institute, Malaysia
09:45-10:00 2014-0247
Design and test of the garlic seed sequencing vibration machineDr. Zhaolei ZhangMechanical and Electronic Engineering College, Shandong Agricultural University, China
Time Paper # Technical Presentations
10:15-10:30 2014-0815
Research on gas-liquid two-phase flow characteristics during self-priming process of the pump Dr. Hong LiResearch Center of Fluid Machinery Engineering and Technology, Jiangsu University, China
10:30-10:45 2014-0198
Cloud service platform of agricultural machinery socialization and its business realizationDr. Jiayi HuangGuangzhou Jiankun Network Technology Develoment Co. Ltd., Guangzhou, China
10:45-11:00 0523-003
Production of reactive oxygen species by collapsing nanobubbles as a reason of seed germination promotionProf. Shu LiuGraduate School of Agricultural & Life Sciences, the University of Tokyo, Japan
Vice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand
Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan
212
11:00-11:15 2014-0202
Evaluation of digestibility of cooked rice grain using in vitro digestion
technique
Prof. Ogawa Yukiharu
Graduate School of Horticulture, Chiba University, Japan
11:15-11:30 2014-1007
Signal detection of colorimetric sensor array based on hyperspectral imaging techniqueProf. Zou XiaoboSchool of Food and Biological Engineering, Jiangsu University, Zhenjiang, China
AAAE 25TH EXECUTIVE COUNCIL MEETING
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
13:30-15:00
AAAE 25TH ANNIVERSARY CELEBRATION (ASIA SUMMIT)
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
15:15-16:50
Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Lanfang Zhang, Secretary General of AAAE
Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Gajendra Singh,
15:00-15:15 Tea Break
15:15-15:30 Remarks by Prof. Gajendra Singh, Founding President of AAAE
15:30-15:40 Address by the representative of CIGR
15:40-15:50 Address by the representative from ASABE
15:50-16:05 Address by the representative from Republic of Korea
16:05-16:15 Remarks by Prof. Vilas M. Salokhe, President of AAAE
16:15-16:50 Free discussion on the future development of AAAE
Founding President of AAAE, Professor of Indian Agricultural research Institute (IARI), India
213
CLOSING CEREMONY OF
SESSION IX ASIA FORUM
SEPTEMBER 17, 2014
WEDNESDAY AFTERNOON
16:50-17:00
Location: Room 302A, the 3rd Floor of CNCCChair: Prof. Gajendra Singh
16:50-17:00 Closing address by Prof. Vilas M. Salokhe, President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India.
214
SESSION IX
POSTER SESSIONS
SEPTEMBER 17, WEDNESDAY
08:30 - 12:00
Topic (1) Postharvest and Biotechnology
Topic (2) Farm Machinery and Power
Topic (3) Information Communication Technology in Agriculture
Topic (4) Energy, Environment and Emerging Technologies
No. Poster # Paper # Paper Titles Name & Institution Country
128 91-001 0618-093
The Ratio of Transpiration to Evapotranspiration for
Maize under Dryland Farming Conditions in Loess Plateau of
China
Zhou ShanshanCollege of natural
resources and environment, Northwest A&F University,
Yangling, Shaanxi China
China
129 91-002 2014-0837
Simulation Analysis and Experiment Research for Gear-
linkage-cam Combination Planting Mechanism
Hu JianpingKey Laboratory of Modern
Agricultural Equipment and Technology,Ministry
of Education ,Jiangsu University
China
No. Poster # Paper # Paper Titles Name & Institution Country
130 92-001 2014-0861
Effect of Gamma Irradiation on Microbiological and Two Main Phospholipids of Four Different
Meats
Chen SiSchool of Food Science and
Biotechnology, Zhejiang Gongshang University
China
131 92-002 2014-0937
Research and Application on Modular Design of Potato Cleaning, Classification and
Storage Machinery Equipment
Gao Bo,MENOBLE co., LTD
Beijing, 100083, ChinaChina
No. Poster # Paper # Paper Titles Name & Institution Country
132 93-001 2014-1007Signal Detection of Colorimetric
Sensor Array Based on Hyperspectral Imaging Technique
LI Zhi-HuaSchool of Food and
Biological Engineering, Jiangsu university
China
No. Poster # Paper # Paper Titles Name & Institution Country
133 94-001 2014-1467Experiments and Research of Related Parameters in Wheat-
Straw Painting
Liu PingyiCollege of Engineering,
China Agricultural University
China
215
TECHNICAL TOURS
TECHNICAL TOURS OF
THE 18TH WORLD CONGRESS OF CIGR
Tour site 1: Chateau Changyu AFIP Global Beijing
Tour site 2: China Mengniu Dairy (Beijing) Co. Ltd.
All tours start from C1 Access of Convention area, CNCC, please note that the starting time is different. Each tour includes: technical tour and lunch.
Itinerary 08:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Chateau Changyu AFIP Global Beijing10:00-12:00 Visiting12:00-13:00 Lunch, KFC one-person package13:00-15:00 Back to CNCCThe tour will include the followings:(1) Changyu Wine Culture Museum(2) European style underground wine cellar(3) World-class wine production facilities(4) Tasting Center (5) Vineyard at Changyu(6) European style village
Route: CNCC→Jingcheng Expressway 17th Exit (at Mujiayu Toll Station, in East Miyun County) and turning left for 300 m, about 2 hours’ driveTour duration: 7 hours including visiting and driving to the site
Itinerary 08:30 Set off from C1 Access of Convention area, CNCC10:00 Arrive at China Mengniu Dairy (Beijing) Co. Ltd.10:00-11:30 Visiting
216
11:30-12:30 Mengniu Staff Canteen, working lunch12:30-14:00 Back to CNCCThe tour will include the followings:(1) Mengniu Dairy Production and Sale Network in China(2) Modernized yoghurt and milk production lines(3) Normal temperature storehouse(4) Enterprise culture, history and management mode(5) Mengniu products exhibition and modernized working district
Route: CNCC→Jingtong Expressway→Baliqiao Toll Station→Jingjin Road→Wuxing Road and turning left at Gantang→Gantang Bridge →Lucheng Middle Road, about 1.5 hours’ driveTour duration: 5.5 hours including visiting and driving to the site
Tour site 3: Xiaotangshan Fruits and Vegetables Exhibition Center
Tour site 4: Beijing DQY Agriculture Technology Co., Ltd.
Itinerary 09:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Xiaotangshan Fruits and Vegetables Exhibition Center 10:00-11:30 Visiting11:30-12:30 Canteen of Training Center at the Exhibition Center, buffet dinner12:30-13:30 Back to CNCCThe tour will include the followings:(1) Modernized greenhouse planting of cucumbers, cherries and tomatoes(2) Modernized greenhouse planting and picking of bananas and papayas(3) Seedling(4) Flowers planting(5) Vegetable planting, small-package vegetable grading, handling and packaging technologies
Route: CNCC→Jingzang Expressway (Badaling Expressway)→6th North Ring Road (to Shunyi for 12 km eastward)→Off expressway at Xiaotangshan Toll Station at Beiyuan→Turning right at 1st traffic light→Turning left for 1.5 km at 2nd traffic light, about 1 hour’s driveTour duration: 4.5 hours including visiting and driving to the site
Itinerary 08:00 Set off from C1 Access of Convention area, CNCC10:00 Arrive at Beijing DQY Agriculture Technology Co., Ltd.10:00-11:30 Visiting11:30-13:00 Origus, buffet dinner (by the same bus)13:00-15:00 Back to CNCC
217
The tour will include the followings:(1) Ecological farm exhibition hall(2) Shell egg processing(3) Liquid egg processing(4) Large-scale methane project(5) Bio-natural gas project
Route: CNCC→Jingzang Expressway (Badaling Expressway)→Kangzhuang Exit→Driving northwards alongside the road (in direction of Zhangshanying town government) for about 15 km, about 2 hours’ driveTour duration: 7 hours including visiting and driving to the site
218
219
220
221
222
223
224
225
THE 18TH WORLD CONGRESS OF CIGR
NAME LIST OF THE PARTICIPANTS
226
Name List of the ParticipantsNo. Name Affiliation Email
1 A.M. Mustafa Zhejiang University, Hangzhou, Zhejiang, China [email protected]
2 Abdul Qaisrani Department of Agriculture, Australia [email protected]
3 Abhijit Borah Department of Agricultural Engineering, Assam Agricultural University, Assam, India [email protected]
4 Abhisesh Silwal Washington State University, USA [email protected]
5 Ahmad Fiaz College of Engineering, Nanjing Agricultural University, China [email protected]
6 Aijie Yuan Chinese Society for Agricultural Machinery, China [email protected]
7 Aijun Zhang Hebei Agricultural University, Baoding, Hebei, China [email protected]
8 Akindele Folarin Alonge University of Uyo, Nigeria [email protected].
ng
9 Akinnawo Ebenezer Indepth Harvest Awareness (IDHA), Gambia [email protected]
10 Alaa El-Din A. Bekhit AlSaid University of Otago, New Zealand [email protected]
11 Alagha Samuel Adelanke Rufus Giwa Polytechnic, Owo, Nigeria [email protected]
12 Alexander Jan Schmithausen Institute of Agricultural Engineering, Germany [email protected]
13 Allen Jack McHugh University of Southern Queensland, Australia [email protected]
14 Amadou Keita International Institute for Water and Environmental Engineering, USA [email protected]
15 Anders Leegaard Riis
Pig Research Centre, Danish Agriculture & Food Council, Copenhagen, Denmark [email protected]
16 Andi Dirpan Rusdin Ehime University, Indonesia [email protected]
17 Andrew Barry Ecole Polytechnique Fédérale de Lausanne (EPFL), Chile [email protected]
18 Anja Graeff TU Muenchen Weihenstephan, Germany [email protected]
19 Anjun Mei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
20 Anning Li Center for Agricultural Mechanization Technology Development and Extension, Beijing, China [email protected]
21 Ao ZhangDepartment of Research and Projects, Hi-Target Survey Instruments Company Ltd., Guangzhou, Guangdong, China
22 Aolin Yao Jilin University, Changchun, Jilin, China [email protected]
23 Arturo Chong Eslava Universidad Autónoma Chapingo, Mexico [email protected]
227
24 Axel Munack Thuenen Institute of Agricultural, Germany [email protected]
25 Babatope Albert Alabadan Federal University, Oye-Ekiti, Nigeria babatope.alabadan@fuoye.
edu.ng
26 Baijing Qiu Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
27 Bangbang Zhang College of Resource and Environmental Sciences, China Agricultural University, Beijing, China [email protected]
28 Baofeng Su Northwest A&F University, Yangling, Shaanxi, China [email protected]
29 Baofeng Zhang Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
30 Baohua Kong Northeast Agricultural University, Harbin, Heilongjiang, China [email protected]
31 Baoming Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
32 Baoxia Sun College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
33 Barbari Matteo University of Florence-Dept., GESAAF, Italy [email protected]
34 Bashar Mehrez South China Agricultural University, Guangzhou, China [email protected]
35 Bdalla Noureldin Osman A China Agricultural University, Beijing, China [email protected]
36 Bei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
37 Bencheng Sheng Kubota China Holdings Co., Ltd., Shanghai, China [email protected]
38 Bengang Wu School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
39 Benhua Zhang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
40 Bernhardt Heinz Agricultural System Engineering Technische Universität München, Munic, Germany
41 Bill Stout Past President of CIGR, USA [email protected]
42 Bin LiInner Mongolia Academy of Agricultural and Animal Husbandry Sciences, Hohhot, Inner Mongolia, China
43 Bin Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
44 Bing XiaWater Conservancy and Energy Dynamics Engineering College, Yangzhou University, Yangzhou, Jiangsu, China
45 Bing Zhao UNESCAP/CSAM
46 Bingnan Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
47 Bo Jiang Research center of fluid machinery engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
228
48 Bo Jin Zhejiang University [email protected]
49 Bo LingCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
50 Bo Wu Jilin University/Changchun Institute of Technology, Changchun, Jilin, China [email protected]
51 Bo Xu College of Engineering, China Agricultural University, Beijing, China [email protected]
52 Bo ZhangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
53 Bo Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
54 Bolin Shi Sub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China [email protected]
55 Boren Fan Jiangsu Bureau of Agricultural Mechanization Management, China [email protected]
56 Bowen Zhao Inner Mongolia Hua De New Technology Limited Company, Hohhot, Inner Mongolia [email protected]
57 Bronson Kevin USDA-ARS, USA [email protected]
58 Caglayan Nuri Dept. of Agricultural Machinery, Turkey [email protected]
59 Caicong Wu College of Information and Electrical Engineering, Beijing University, Beijing, China [email protected]
60 Cailing Liu China Agricultural University, Beijing, China [email protected]
61 Can ErtekinDepartment of Farm Machinery, Faculty of Agricultural Engineering, Akdeniz University, Antalya, Turkey
62 Cascone Giovanni University of Catania, Italy [email protected]
63 Casey Kenneth Texas A&M Agri. Life Research, USA [email protected]
64 Ceren Tülek Ege University, Turkey [email protected]
65 Changfeng Jiao College of Economics and Management, China Agricultural University, Beijing, China [email protected]
66 Changfu TongInstitute of Water Resources Sciences in Pastoral Areas, Ministry of Water Resources of PRC, Hohhot, Inner Mongolia, China
67 Changhua Liu Hubei Bureau of Agricultural Mechanization Management, China [email protected]
68 ChangHua Lu Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China [email protected]
69 Changhua Ma Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
70 Changran He Beijing Information Science and Technology University, Beijing, China [email protected]
71 Changyong Shao College of Engineering, China Agricultural University, Beijing, China [email protected]
229
72 Changyuan ZhaiCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
73 Chanjun Sun Zhejiang University, Hangzhou, Zhejiang, China [email protected]
74 Chanli Hu College of Electrical and Information, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
75 Chan-Seok Ryu Gyeongsang National University, Republic of Korea [email protected]
76 Chao Ma China Agricultural University, Beijing, China [email protected]
77 Chao Zheng College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
78 Chaohui Feng University College Dublin, Ireland [email protected]
79 Chaohui Hao Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
80 Chaojie Cai Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
81 Chaoyong Cai Zhejiang Bureau of Agricultural Mechanization Management, China [email protected]
82 Chee Wan Chan Malaysian Agricultural Research and Development Institute, Malaysia [email protected]
83 Chen Chen Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected]
84 Chen Zhai College of Engineering, China Agricultural University, Beijing, China [email protected]
85 Chen SunInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China
86 Chen Tang Zhejiang University, Hangzhou, Zhejiang, China [email protected]
87 Chen Zhang Sino-European Institute of Aviation Engineering, Tianjin, China [email protected]
88 Chen-ang LvSchool of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
89 Chenchen Cao Dalian Ocean University, Dalian, Liaoning, China [email protected]
90 Cheng ShenNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
91 Chengchun Zhang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
92 Chenggao Xu Guizhou Committee of Agriculture, Guizhou, China [email protected]
93 Chengtao Wang Beijing Technology and Business University, Beijing, China [email protected]
94 Chengxu Lv China Agricultural University, Beijing, China [email protected]
95 Chenhu Xu Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
230
96 Chenxi Zhao Northeast Agricultural University, Harbin, Heilongjiang, China [email protected]
97 Chenxian Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected]
98 Chi Zhang China Agricultural University, Beijing, China [email protected]
99 Chu GaoWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
100 Chu ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
101 Chuanmin Yang College of Mechanical Engineering, Tianjing University of Commerce, Tianjin, China [email protected]
102 Chuanyang ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
103 Chuanyuan Zhao College of Mechanical Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected]
104 Chukai Chen Office of Agricultural Mechanization, Department of Agriculture of Guangdong, China [email protected]
105 Chun Wang Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected]
106 Chunguang Wang Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected]
107 Chunjiang ZhaoNational Engineering Research Center for Information Technology in Agriculture, Beijing, China
108 Chunlin Xu Harbin Academy of Agricultural Sciences, Harbin, Heilongjiang, China [email protected]
109 Chunsong GuanNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
110 Chunxia Jiang Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
111 Chunxia Liu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
112 Claudio García National Research Institute of Agriculture, Uruguay [email protected]
113 Claus Grøn Sørensen Aarhus University, Denmark clausaagegronsoerensen@
gmail.com
114 Cong Chen Nanjing Research Institute for Agricultural Ministry of Agriculture, Nanjing, Jiangsu, China [email protected]
115 Cuihong Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
116 Cuiling Li College of Engineering, China Agricultural University, Beijing, China [email protected]
117 Cungui He Shaanxi Bureau of Agricultural Mechanization Management, China [email protected]
231
118 Cunkun Chen National Center for Agro-products Preservation Engineering and Technology, Tianjin, China [email protected]
119 D. S. Balachandra Indian Society of Agricultural Engineers, India [email protected]
120 Dachun Qin Office of Agricultural Machinery, Chongqing Committee of Agriculture, Chongqing, China
121 Dae-hyun Jung Seoul National University, Republic of Korea [email protected]
122 Daniel Berckmans KU Leuven, Belgium [email protected]
123 Daniella Jorgede Moura State University of Campinas, Brazil daniella.moura@feagri.
124 Danyang Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
125 Daobing Chen College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
126 Daoliang Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
127 Daolin ZhangCollege of Agricultural Engineering and Food Sciences, Shandong University of Technology, Zibo, Shandong, China
128 Dariush Zare Shiraz University, Iran [email protected]
129 Dariush Zare Shiraz University, Iran [email protected]
130 Darrin John Drollinger
American Society of Agricultural and Biological Engineers, USA [email protected]
131 David Wilson Purdue University, USA [email protected]
132 Dawei Gao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
133 Da-Wen Sun Agriculture & Food Science Centre, University College Dublin, Ireland [email protected]
134 De Gao Ningbo Inst i tute of Technology, Zhej iang University, Ningbo, Zhejiang, China [email protected]
135 De Tian North China Electric Power University, Beijing, China [email protected]
136 Dean Zhao Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
137 Dechang Yang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
138 Dehua Wu Anhui Huaifeng Modern Agricultural Equipment Ltd. Co. [email protected]
139 Dejian Zhang Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected]
140 Dejun Chen Jinhua Vocation and Technology Institute, Jinhua, Zhejiang, China [email protected]
141 Deke Xing
Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China
232
142 Dengwei Wang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
143 Dennis Johannes W. Snoek Wageningen University, the Netherlands [email protected]
144 Dexia Chi Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
145 Dezhao Liu Aarhus University, Denmark [email protected]
146 Dianlong Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
147 Dong HuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
148 Dong Wang College of Engineering, China Agricultural University, Beijing, China [email protected]
149 Dongdong DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
150 Donghong Liu Zhejiang University, Hangzhou, Zhejiang, China [email protected]
151 Dongwei Wang Qingdao Agricultural University, Qingdao, Shandong, China [email protected]
152 Dongxing Zhang College of Engineering, China Agricultural University, Beijing, China [email protected]
153 Douglas J. Reinemann University of Wisconsin-Madison, USA [email protected]
154 Du Chen China Agricultural University, Beijing, China [email protected]
155 Earl Vories USDA-ARS, USA [email protected]
156 Elfriede Ofner-Schroeck LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@lfz.
or.at
157 Enchen jiang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
158 Endita Prima Ari Pratiwi
Laboratory of Irrigation and Water Management, Department of Agro-Environmental Sciences, Faculty of Agriculture, Kyushu University, Japan
159 Enkhbayar Gonchigdorj MSUA, Mongolia [email protected]
160 Enrique Palacios Colegio de Postgraduados, Mexico [email protected]
161 Enrong Mao College of Engineering, China Agricultural University, Beijing, China [email protected]
162 Eric B. Smith USA [email protected]
163 Erkan Dikmen Dikmen
Dept. of Energy Systems Engineering, Fac. of Technology, Süleyman Demirel Univ., Turkey [email protected]
164 Evelia Schettini University of Bari, Italy [email protected]
165 Fabian Sellmann University of Applied Science Osnabrueck, Germany
233
166 Fang Lu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
167 Fang Tian College of Engineering, China Agricultural University, Beijing, China [email protected]
168 Fang Xie China Agricultural University, Beijing, China [email protected]
169 Fang ZhangInstitute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China
170 Fangkai MaDepartment of Planning, Changjiang Institute of Survey, Planning, Design and Research, Wuhan, Hubei, China
171 Fangxia Pei Lanzhou University of Technology, Lanzhou, Gansu, China [email protected]
172 Fangyuan AoChongqing Center for Agricultural Mechanization Technology Development and Extens ion , Chongqing, China
173 Fanyu QiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
174 Fayose Folasayo Tshwane University of Technology, South Africa [email protected]
175 Fedro S. Zazueta Office of Academic Technology, University of Florida, USA [email protected]
176 Fei Liu College of Mechanical Engineering, Inner Mongolia University, Hohhot, Inner Mongolia, China [email protected]
177 Fei LiuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
178 Feifei Tao College of Engineering, China Agricultural University, Beijing, China [email protected]
179 Feiyu Ma College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
180 Fen He Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
181 Fen LiaoInstitute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, Nanning, Guangxi, China
182 Feng Kang Beijing Forestry University, Beijing, China [email protected]
183 Feng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
184 Feng Lv College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
185 Fengkun Sun College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
186 Fengle ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
234
187 Fengxian Gao College of Animal Science and Technology, Hunan Agricultural University, Changsha, Hunan, China [email protected]
188 Firat Komekci Department of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey [email protected]
189 Francis Kumi University of Cape Coast, Ghana [email protected]
190 Frauke P. C. Müller Institute of Agricultural Engineering, Germany [email protected]
191 Frederik Langsenkamp
University of Applied Science Osnabrueck, Germany
192 Fugui Zhang College of Mechanical Engineering, Guizhou University, Guiyang, Guizhou, China [email protected]
193 Fuping Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
194 Fuqiang Li College of Engineering, China Agricultural University, Beijing, China [email protected]
195 Fuxing ZouCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
196 Fuyang TianCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
197 Fuzeng YangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
198 Gaixia ZhaiHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China
199 Gajendra Singh Indian Agricultural Research Institute(IARI), India [email protected]
200 Gang Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
201 Gang Wang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
202 Gang ZhaoSchool of Mechatronics and Engineering, Harbin Engineering University, Harbin, Heilongjiang, China
203 Gaofeng ZhouCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
204 Gaohong Yu College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected]
205 Ge Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
206 Gerard P.A. Bot Wageningen University, the Netherlands [email protected]
207 Gerasimos Martzopoulos Aristotle University of Thessaloniki, Greece [email protected]
208 Gerd-Christian Maack University of Bonn, Germany [email protected]
235
209 Gerrit J. Carsjens Wageningen University, the Netherlands [email protected]
210 Gerrit van Straten Wageningen University, the Netherlands [email protected]
211 Giuliano Vox Department of Agricultural and Environmental Science DISAAT, University of Bari, Italy [email protected]
212 Guangnan Chen University of Southern Queensland, Australia [email protected]
213 Guangqun Huang College of Engineering, China Agricultural University, Beijing, China [email protected]
214 Guangsheng Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected]
215 Guangwei WuDepartment of Precision Agriculture, National Engineering Research Center for Information Technologies in Agriculture, China
216 Guangyou Yang Hubei University of Technology, Wuhan, Hubei, China [email protected]
217 Guangzhong LuanCollege of Food Science and Engineering, Northwest A&F University, Yangling, Shaanxi, China
218 Guanhua Huang China Agricultural University, Beijing, China [email protected]
219 Guanting PanCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
220 Guanyu Shang Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected]
221 Guanze He Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
222 Guifang Fan Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, China [email protected]
223 Guiju Fan Shandong Agricul tural Universi ty, Tai 'an, Shandong, China [email protected]
224 Guilin LiuHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China
225 Guimin Wang Foton Lovol International Heavy Industry Co., Ltd. YTO Group, China [email protected]
226 Guisheng Geng Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
227 Guo Zhai Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
228 Guochao Bu Beijing Forestry University, Beijing, China [email protected]
229 Guolin Li Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
230 Guoqiang Zhang Aarhus University, Denmark [email protected]
231 Guotian HuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
236
232 Guoxin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
233 Guoyang Yuan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
234 H. Emre Akman Akdeniz University, Turkey [email protected]
235 Hai Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
236 Haichao SongCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China
237 Haifeng Lu China Agricultural University, Beijing, China [email protected]
238 Haihua Wang China Agricultural University, Beijing, China [email protected]
239 Haihua Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
240 Hailiang ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
241 Haina Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
242 Haiwei RenDepartment of Food Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, China
243 Haiyan Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
244 Haiyang Yu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
245 Haiye Yu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
246 Hakjin Kim Seoul National University, Republic of Korea [email protected]
247 Hamelin Lorie University of Southern Denmark, Canada [email protected]
248 Han Bao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
249 Han Huang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
250 Han Pan China Agricultural University, Beijing, China [email protected]
251 Han Shufeng John Deere, USA [email protected]
252 Hannah Licharz University of Bonn, Germany [email protected]
253 Hanping Mao Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
254 Hans von Wachenfelt
Swedish University of Agricultural Science, Germany [email protected]
255 Hanyue Zhang Institute of Modern Agricultural Equipment of Guangdong, China
237
256 Hao Chun Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
257 Hao Zhang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
258 Haopeng Liu College of Engineering & Technology, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
259 Haoran Mei Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
260 Hasan Yilmaz Akdeniz University, Faculty of Agriculture, Turkey [email protected]
261 Hassanien Reda College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
262 Hassouna Mélynda INRA, France melynda.hassouna@rennes.
263 Hatem Mohamed Faculty of Agriculture, Cairo University, Egypt [email protected]
264 He WangKey Laboratory of Networked Control System, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, Liaoning, China
265 Helena Jungbluth Kerstin University of Hohenheim, Germany [email protected]
266 Heling Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
267 Henan Zhang Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
268 Heng Li Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected]
269 Heping Zhu USDA-ARSATRU, USA [email protected]
270 Hermann Auernhammer Munich University of Technology, Germany [email protected]
271 Hermann Garbers German Engineering Federation - Agricultural Machinery Division, Germany [email protected]
272 Hiroshi Shimizu Kyoto University, Japan [email protected]
273 Hong Cao Ins t i t u t e o f Agr i cu l tu ra l Economics and Information, Nanjing, Jiangsu, China [email protected]
274 Hong Cheng Jilin Bureau of Agriculture, China [email protected]
275 Hong Liu Hainan Normal University [email protected]
276 Hong Zhang Zhejiang Gongshang University, Hangzhou, Zhejiang, China
277 Hongbin Cong Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
278 Hongbin Pu South China University of Technology, Guangzhou, China [email protected]
279 Hongfang Yuan College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
280 Hongguo Cao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
238
281 Hongju He University College Dublin, Ireland [email protected]
282 Honglei Jia College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
283 Hongli Wang Jilin University, Changchun, Jilin, China [email protected]
284 Hongliang Cao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China
285 Hongping ZhouCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China
286 Hongwen Li College of Engineering, China Agricultural University, Beijing, China [email protected]
287 Hongxin Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
288 Hongyan Gao Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
289 Hongyin Jiang Anhui Bureau of Agricultural Mechanization Sciences, China [email protected]
290 Hongyu Liu Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
291 Hongyu Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
292 Hongyu Yan Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China [email protected]
293 Hongzhou Lei College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
294 Hua Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
295 Hua Wang Chinese Academy of Engineering, Beijing, China [email protected]
296 Hua Zhang Anhui Science and Technology University, Fengyang, Anhui, China [email protected]
297 Hualu SongCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
298 Huangzhen Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
299 Hubiao Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
300 Hui Guo College of Mechanical and Traffic, Xinjiang Agricultural University, Urumqi, Xinjiang, China [email protected]
301 Hui Wang Chinese Academy of Agricultural Mechanization Sciences [email protected]
302 Hui Zhang Zhejiang University, Hangzhou, Zhejiang, China [email protected]
303 Hui Zhao Tianjing University of Science and Technology, Tianjin, China [email protected]
304 Huichun Ye College of Resource and Environmental Sciences, China Agricultural University, Beijing, China [email protected]
239
305 Huimin Fang Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
306 Huimin Feng College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
307 Huixia Wang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
308 Ibrahim Saleh MacDon Industries Ltd., Canada [email protected]
309 Ibraimo Teleha Chabite
College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
310 Ikko Ihara Kobe University, Japan [email protected]
311 In-Bok Lee Seoul National University, Republic of Korea [email protected]
312 Isabel Maria Duarte Escola Superior Agrária de Coimbra, Portugal [email protected]
313 Ivan Svec Institute of Chemical Technology in Prague, Czech Republic [email protected]
314 Jan Häbler Institute of Agricultural and Urban Ecological, Berlin Humboldt University, Germany
315 Jan MaxaInstitute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany
316 Jana Galambosova Slovak University of Agriculture in Nitra, Slovakia [email protected]
317 Janusz Piechocki University of Warmia and Mazuryin Olsztyn, Poland [email protected]
318 Jaw-Kai Wang Jawkai Bioengineering R&D Center, Shenzhen, China [email protected]
319 Jean-Christophe Rousseau Berthoud, France [email protected]
320 Jerzy Weres Poznan University of Life Sciences, Poland [email protected]
321 Ji DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
322 Ji ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
323 Jia Chen College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
324 Jia Huang Guangzhou Jiankun Network and Technology Development Co. Ltd. [email protected]
325 Jia Zhang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
326 Jia Zhao Ningbo Inst i tute of Technology, Zhej iang University, Ningbo, Zhejiang, China [email protected]
327 Jiabo Zhan Shandong Bureau of Agricultural Mechanization Management, China [email protected]
240
328 Jiachen RenCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
329 Jiale Zhao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
330 Jiaming Li China Agricultural University, Beijing, China [email protected]
331 Jian Chen College of Engineering Technology, Southwest University, Chongqing, China [email protected]
332 Jian Chen Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected]
333 Jian Jin Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
334 Jian Li College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China [email protected]
335 Jian Li Beijing Technology and Business University, Beijing, China [email protected]
336 Jian PanSchool of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
337 Jian Xu Ningbo University, Ningbo, Zhejiang, China [email protected]
338 Jian Yu Water Resources Research Institute of Inner Mongolia, Hohhot City Inner Mongolia, China
339 Jian Zhuang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
340 Jianbo Di College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
341 Jianfen LiangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
342 Jianfeng SunCollege of Food Science and Technology, Agricultural University of Hebei, Baoding, Hebei, China
343 Jianfeng Zhou Washington State University, USA [email protected]
344 Jiang XuCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
345 Jiangchang Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
346 Jiangtao Qi Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
347 Jianhan Lin Key Laboratory of Agri-Information, Ministry of Agriculture, P. R. China [email protected]
348 Jianjun Du Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
349 Jianjun Yin Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
241
350 Jianjun Zhao College of Engineering, China Agricultural University, Beijing, China [email protected]
351 Jianlong ZhouBureau of Agricultural Mechanization Management, Agriculture Bureau of HeilongJiang Agricultural Reclamation Department, Heilongjiang, China
352 Jianning Yuan Department of mechanical engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
353 Jiannong Xin University of Florida, Institute of Food and Agricultural Sciences, USA [email protected]
354 Jianping Hu
Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu Province, Jiangsu University, Zhenjiang, Jiangsu, China
355 Jianping LiDepartment of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China
356 Jianping LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
357 Jianping Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
358 Jianqiao Li Jilin University, Changchun, Jilin, China [email protected]
359 Jiantao Liu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
360 Jianwen Lu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
361 Jianxi ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
362 Jianxia Kuang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China
363 Jianxu Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
364 Jianzhu Zhao College of Engineering, China Agricultural University, Beijing, China [email protected]
365 Jiao Wang China Agricultural University, Beijing, China [email protected]
366 Jiaoyang Pu School of Water Resources and Environment, China University of Geosciences, Beijing, China [email protected]
367 Jiasheng WangCollege of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao, Shandong, China
368 Jiaxing Xie South China Agricultural University [email protected]
369 Jichun Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
370 Jie Li Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China [email protected]
242
371 Jie Liu College of Engineering, China Agricultural University, Beijing, China [email protected]
372 Jie Wen China Institute of Water Resources and Hydropower Research, Beijing, China
373 Jieqiang Zhuo Beijing Agricultural Machinery Institute, Beijing, China [email protected]
374 Jihe Cai Changzhou Institute of Technology, Changzhou, Jiangsu, China [email protected]
375 Jin He College of Engineering, China Agricultural University, Beijing, China [email protected]
376 Jin Tang Jilin University, Changchun, Jilin, China [email protected]
377 Jin Tong College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
378 Jin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
379 Jin Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
380 Jinbing Hu Zhejiang University, Hangzhou, Zhejiang, China [email protected]
381 Jinfu Wang Chery Heavy Industry Co., Ltd, China [email protected]
382 Jing Gan China Agricultural University, Beijing, China [email protected]
383 Jing GuoCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
384 Jing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
385 Jing Lin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China [email protected]
386 Jing Liu Guizhou Institute of Mountain Agricultural Mechanization, China [email protected]
387 Jing Sun Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
388 Jing Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
389 Jingguang Qin Chinese Society for Agricultural Engineering, China [email protected]
390 Jinghui XuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
391 Jingjing Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
392 Jingliang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
393 Jinguang Zhu Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected]
243
394 Jinguo ZhangDepartment of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China
395 Jingxu Wang College of Engineering, China Agricultural University, Beijing, China
396 Jingyun Zhang Henan University of Technology, Zhengzhou, Henan, China
397 Jinhui Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
398 Jinhui Zhou College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
399 Jinjiang Zhang Guangdong Agri-machinery Research Institute, Guangzhou, Guangdong, China [email protected]
400 Jinkun Pan Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
401 Jinling Cong College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
402 Jiqin Ni Purdue University, USA [email protected]
403 Jirka Simunek University of California – Riverside, Czech Republic [email protected]
404 Jirui DuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
405 Jiulin SunInstitute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing, China
406 Jiyu PengCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
407 Jiyuan Liu Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
408 Jiyue Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
409 Jizhan Liu Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
410 Jizhang Wang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
411 Joachim Mueller Universitaet Hohenheim, Germany [email protected]
412 Jocelyn Guertin Quebec City Convention Centre, Canada [email protected]
413 Joergensen Malene Danish Agriculture and Food Council, Denmark [email protected]
414 John Kenneth Schueller University of Florida, USA [email protected]
415 John Obiero University of Venda, Kenya [email protected]
416 John Reid John Deere, USA [email protected]
244
417 John Shi Guelph Food Research Center, Agriculture and Agri-Food Canada, Canada [email protected]
418 Joko Nugroho Wahyu Karyadi Gadjah Mada University, Indonesia [email protected]
419 Jongwoo Ha Seoul National University, Republic of Korea [email protected]
420 Joon Yong Kim Department of Biosystems Engineering, Seoul National University, Republic of Korea [email protected]
421 Jose Manuel Goncalves College of Agriculture of Coimbra, Portugal [email protected]
422 José Miguel Aguilera CONICYT, Chile [email protected]
423 Josef KienzleAgro-Industry Off icer, Infras t ructure and Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO
424 Joseph Davidson Washington State University-TriCities, USA [email protected]
425 Joseph Zulovich University of Missouri, USA [email protected]
426 Jozef Grochowicz University of Vincent Pol, Poland [email protected]
427 Juan Zhao College of Engineering, China Agricultural University, Beijing, China [email protected]
428 Julian Francis Vincent International Society of Bionic Engineering, UK [email protected]
429 Jumin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China
430 Jun Bao Northeast Agricultural University, Harbin, Heilongjiang, China [email protected]
431 Jun Cui Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
432 Jun Fu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
433 Jun Gao Kunming University of Science and Technology, Kunming, Yunnan, China [email protected]
434 Jun HuCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China
435 Jun Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
436 Jun Sun Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
437 Jun WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
438 Jun Wang Jilin University, Changchun, Jilin, China [email protected]
439 Jun Wei Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
245
440 Jun ZhangInstitute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China
441 Junan Liu China Agricultural University, Beijing, China [email protected]
442 Junfa Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
443 Junfa Wang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
444 Junfeng Liu College of Mechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
445 Junfeng Zhang Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China [email protected]
446 Jungang Wang Jiangxi Association for Agricultural Mechanization, China [email protected]
447 Junguo Liu School of Nature Conservation, Beijing Forestry University, Beijing, China [email protected]
448 Junhu Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected]
449 Junjie Xue China Agricultural University, Beijing, China [email protected]
450 Junmin Yang Yunnan Institute of Agricultural Mechanization Sciences, Yunnan, China [email protected]
451 Junming Hou College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
452 Junning Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
453 Junwei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
454 Juraj Maga Slovak University of Agriculture in Nitra,, Slovakia [email protected]
455 K.C. Ting University of Illinois at Urbana-Champaign, USA [email protected]
456 Kai Peng College of Engineering, China Agricultural University, Beijing, China [email protected]
457 Kaifeng LiMAE Northern Co. Ltd., Chinese Academy of Agricultural Mechanization Sciences, Beijing, China
458 Kaixuan ZhaoCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
459 Kang Tu Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
460 Kehinde Adedeji Adekola Jilin University, Nigeria [email protected]
461 Keming DuIns t i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China
462 Kenji Omasa The University of Tokyo, Japan [email protected]
246
463 Kenneth A. Sudduth
USDA-ARS Cropping Systems and Water Quality Research Unit [email protected]
464 Keqiang Yu Zhejiang University, Hangzhou, Zhejiang, China [email protected]
465 Kerstin Jungbluth University of Bonn, Germany [email protected]
466 Khansawanh Sisopha Kyushu University, Japan [email protected]
467 Kotwaliwale Nachiket Central Institute of Agricultural Engineering, India [email protected]
468 Koungveng Taing Kyushu University, Japan [email protected]
469 Kuichuan Sheng Zhejiang University, Hangzhou, Zhejiang, China [email protected]
470 Kuishun Cui Heilongjiang Agricultural Machinery Repairing Institute, Harbin, Heilongjiang, China [email protected]
471 Kun Yu Syngenta Biotechnology (China) Co., Ltd., Beijing, China [email protected]
472 Kun Zhou University of Aarhus, Faculty of Science, Denmark [email protected]
473 Kundian Wang College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China
474 Kunpeng Xue College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
475 Kurpaska Slawomir Agricultural University in Kraków, Poland [email protected]
476 Kyo Suh Seoul National University, Republic of Korea [email protected]
477 Kyosuke Yamamoto The University of Tokyo, Japan [email protected].
u-tokyo.ac.jp
478 Lalit R. Verma American Society of Agricultural and Biological Engineers, USA [email protected]
479 Lanxin Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
480 Legang Wang Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected]
481 Lei HeInstitute of Mechanical Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China
482 Lei Li College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
483 Lei Ren University of Manchester, UK [email protected]
484 Lei Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
485 Lei Wang Zhejiang University, Hangzhou, Zhejiang, China [email protected]
486 Leilei Zhang College of Engineering, China Agricultural University, Beijing, China [email protected]
487 Leiqing Pan College of Food Technology and Sciences, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
247
488 Li Gong Guangdong Agricultural Machinery Research Institute, Guangzhou, Guangdong, China [email protected]
489 Li Guo Jilin University, Changchun, Jilin, China [email protected]
490 Li Li College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
491 Li Li China Agricultural University, Beijing, China [email protected]
492 Li Ni China Agricultural University, Beijing, China [email protected]
493 Li Yang China Agricultural University, Beijing, China [email protected]
494 Li Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
495 Li Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
496 Lianbang Zheng Bureau of Agricultural Machinery, Heilongjiang Agriculture Committee, Heilongjiang, China [email protected]
497 Liang Chen College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected]
498 Liang Gong Shanghai Jiaotong University, Shanghai, China [email protected]
499 Liang He Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
500 Liang Jing School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
501 Liang Meng Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
502 Liang SunZhejiang Provincial Key Laboratory of Planting Equipment Technology, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China
503 Liangfu ZhouNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
504 Lianhao Li China Agricultural University, Beijing, China [email protected]
505 Liansun Wu Farm Technology Group, Wageningen, the Netherlands [email protected]
506 Liaowen Huang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
507 Lichun ZhangCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
508 Lidi Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
509 Liezhou Zhong Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected]
510 Lifa Chai Hebei Agricultural University, Baoding, Hebei, China [email protected]
511 Lifeng Fan College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
248
512 Liguo Wei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
513 Lijing Liu Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
514 Lijuan Kong Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
515 Lijuan Shi College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
516 Lijuan XieCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
517 Limei Tian Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
518 Liming Xu China Agricultural University, Beijing, China [email protected]
519 Liming Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
520 Lin ChenCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China
521 Lin Luo Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
522 Lin Xue College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
523 Lina Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected]
524 Lina Zhang College of Engineering, China Agricultural University, Beijing, China [email protected]
525 Lina Zhou College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
526 Linchang Wang Bureau of Reclamation, Ministry of Agriculture, P. R. China [email protected]
527 Ling Zhao College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
528 Lingying Zhao The Ohio State University, USA [email protected]
529 Linlin Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
530 Linong GongCollege of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China
531 Liqing Zhao Qingdao Agricultural University, Qingdao, Shandong, China [email protected]
532 Liu LiuCol l ege o f Food Eng inee r ing , Nor theas t Agricultural University, Harbin, Heilongjiang, China
533 Liu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
249
534 Liu WangFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China
535 Liubin LuoCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
536 Lixia HouCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
537 Lixin Wang Hebei University of Science and Technology, Shijiazhuang, Hebei, China [email protected]
538 Lixue ZhuCollege of Mechanical and Electronic Engineering, Zhongka i Un ive r s i t y o f Agr i cu l t u r e and Engineering, Guangzhou, Guangdong, China
539 Long Chen China Agricultural University, Beijing, China [email protected]
540 Long Qi College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
541 Longsheng FuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
542 Lu Lin Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected]
543 Lu SunCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
544 Luis Santos Pereira Technical University of Lisbon, Brazil [email protected]
545 Lujia Han College of Engineering, China Agricultural University, Beijing, China [email protected]
546 Lumkes John Purdue University, USA [email protected]
547 Luofang Wang Hunan Bureau of Agricultural Mechanization Management, China
548 Luowei Pei Zhejiang University, Hangzhou, Zhejiang, China [email protected]
549 Luquan Ren Chinese Academy of Sciences, Beijing, China [email protected]
550 Lurui ZhangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
551 Luyu Ding China Agricultural University, Beijing, China [email protected]
552 Macak Miroslav Slovak University of Agriculture in Nitra, Slovakia [email protected]
553 Maki Taichi Kyushu University, Japan [email protected]
554 Malcolm Wegener The University of Queensland, Australia [email protected]
555 Man Luo School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected]
250
556 Man Zhang China Agricultural University, Beijing, China [email protected]
557 Manjin Cheng Inner Mongolia Institute of Water Resource Sciences, Hohhot, Inner Mongolia, China [email protected]
558 Manquan ZhaoCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
559 Mao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
560 Marc Vanacht AG Business Consultants, USA [email protected]
561 Marcelo Dodson Argosy University, Brazil [email protected]
562 Marenya Moses University of Venda, South Africa [email protected]
563 Maria Paula Amador Escola Superior Agráriade Coimbra, Portugal [email protected]
564 Mario García Petillo
Univers idad de la Repúbl ica-Facul tad de Agronomía, Uruguay [email protected]
565 Mark L. Wahlqvist Epidemiology & Preventive Medicine, Faculty of Medicine, Monash University, Australia
566 Mary Leigh Wolfe Virginia Tech, USA [email protected]
567 Meghdad KhazaeeDepartment of Mechanics of Agricul tura l Machinery, Tarbiat Modares University, Tehran, Iran
568 Meijia WangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
569 Meisheng Jiang China Agricultural University, Beijing, China [email protected]
570 Meng Guan College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China
571 Meng Hu Shanghai Jiaotong University, Shanghai, China [email protected]
572 Meng LiuCollege of Vehicle and Traffic Engineering, Henan University of Science and Technology, Luoyang, Henan, China
573 Meng WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
574 Meng Yang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected]
575 Meng YangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
576 Meng Zhang China Agricultural University, [email protected]
577 Mengchu Huang Shanghai Springer Information Consulting Services Co., Ltd, Shanghai, China
578 Mengji Guo China Agricultural University, Beijing, China [email protected]
251
579 Merete Lyngbye Munters, Denmark [email protected]
580 Mete Yiğit Akdeniz University, Turkey [email protected]
581 Miao Zhang China Agricultural University, Beijing, China [email protected]
582 Michael Ryan Trade and Agriculture Directorate, OECD
583 Michele Reba USDA-Agricultural Research Service, USA [email protected]
584 Mikio Umeda Graduate School of Agriculture, Kyoto University, Japan
585 Min Feng Office of Agriculture History Researches, China Agricultural University, Beijing, China [email protected]
586 Min Liu China Agricultural Machinery Testing Center, Ministry of Agriculture, China [email protected]
587 Min WeiSchool of Agronomic Sciences and Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shangdong, China
588 Ming Cui Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
589 Ming Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
590 Ming Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
591 Ming WangLaboratory of Energy Dynamics, Northeast Agricultural University, Harbin, Heilongjiang, China
592 Ming YaoCollege of Energy and Dynamics Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China
593 Ming Zhu Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
594 Mingchuan Chen Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
595 Mingfeng Liu College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
596 Mingfu Huang Guangxi Bureau of Agricultural Mechanization Management, Guangxi, China
597 Mingjin Xin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
598 Mingming XuCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China
599 Mingsen Huang Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
600 Mingyong Xie Nanchang University, Nanchang, Jiangxi, China
601 Mingyou WangNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
252
602 Mingzhen Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
603 Mingzhu Hao College of Information Science and Technology, Ningbo University, Ningbo, Zhejiang, China [email protected]
604 Minin Vladislav North-West Research Institute of Agricultural Engineering & Electrification, Turkey [email protected]
605 Minli Yang College of Engineering, China Agricultural University, Beijing, China [email protected]
606 Minzan Li China Agricultural University, Beijing, China [email protected]
607 Mladen Todorovic CIHEAM-Mediterranean, Italy [email protected]
608 Mo Li Jilin University, Changchun, Jilin, China [email protected]
609 Mo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
610 Morten Dam Rasmussen Aarhus University, Denmark [email protected]
611 Mousong WuSchool of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China
612 Moustafa Fadel UAE University, Canada [email protected]
613 Muhetar AishaBureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Xinjiang, China
614 Muhua Liu College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China [email protected]
615 Na Duan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
616 Na Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
617 Na LiCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
618 Na XuChina Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China
619 Naiqian Zhang Kansas State University, USA [email protected]
620 Namal Samarakoon
Industrial Development Officer for Agri-Business Development Branch, UNIDO
621 Namkyu Yun National Academy of Agricultural Science, Rural Development Administration, Republic of Korea [email protected]
622 Nan Fu Soochow University, Suzhou, Jiangsu, China [email protected]
623 Nan Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
624 Nan XiaCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
253
625 Nanxin Chen China Agricultural University, Beijing, China [email protected]
626 Naoshi KondoLaboratory of Bio-Sensing Engineering, Division of Environmental Science & Technology Graduate School of Agriculture, Kyoto University, Japan
627 Naoto Shimizu Hokkaido University, Japan [email protected]
628 Nazneen Barday Postharvest Technology Lab, Stellenbosch University, Stellenbosch, CPT, South Africa [email protected]
629 Neugebauer Maciej [email protected]
630 Nick Sigrimis Ag. University of Athens, USA [email protected]
631 Nigel Hancock University of Southern Queensland, Australia [email protected]
632 Nimmermark Sven Swedish University of Agricultural Sciences, Sweden [email protected]
633 Ning Liu College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China [email protected]
634 Ning Wang Oklahoma State University, USA [email protected]
635 Ning YangInstitute of Tillage and Planting, Liaoning Academy of Agricultural Sciences, Shenyang, Liaoning, China
636 Ningning Yao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
637 Noboru Noguchi Hokkaido University, Japan [email protected]
638 Norman Scott National Academy of Engineering/Cornell University, Cocos (Keeling) Islands [email protected]
639 Nozdrovicky Ladislav Slovak University of Agriculture in Nitra, Slovakia ladislav.nozdrovicky@uniag.
sk
640 Ofner-Schroeck Elfriede LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@
raumberg-gumpenstein.at
641 Ogawa Yukiharu Chiba University, Japan [email protected]
642 Oleg MarchenkoAll-Russia Research Institute for Mechanization in Agriculture (GNUVIM Rossel khoz academyi), Ukraine
643 Olivares Diaz Edenio Hokkaido University, Japan [email protected]
644 Osman Yaldiz Depar tment of Farm Machinery, Akdeniz University, Antalya, Turkey [email protected]
645 Palacios-Vélez Óscar Luis
Postgrado de Hidrociencias, Campus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Montecillo, Estado de México, México
646 Panpan Yuan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
647 Papanastasiou Dimitris
Laboratory of Agricultural Engineering and Environment, Institute for Research and Technology of Thessaly, Centre for Research and Technology, Hellas, Greece
254
648 Pavel Kic Czech University of Life Sciences, Czech Republic [email protected]
649 Peeyush Soni Asian Institute of Technology, Thailand [email protected]
650 Pei Huang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
651 Peichen Hou Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
652 Peitong LiuCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
653 Peizeng Zhang Department of Agriculture of Shanxi, China
654 Peng Luo College of Mechanical Engineering, Tianjin University of Commerce, Tianjin, China [email protected]
655 Pengcheng NieSchool of Biosystems Engineering and Food Sciences, Zhejiang University, Hangzhou, Zhejiang China
656 Pengfei ZhaoNational Engineering Research Center for Information Technology in Agriculture, Beijing, China
657 Pengfei Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
658 Perendeci Nuriye Akdeniz University, Engineering Faculty, Turkey [email protected]
659 Peter Groot Koerkamp Wageningen University, the Netherlands [email protected]
660 Peter Schulze Lammers University of Bonn, Germany [email protected]
661 Phakwipha Sutthiwaree
College of Engineering, China Agricultural University, Beijing, China [email protected]
662 Philippe Van Overbeke
Technology & Food Unit, Institute for Fisheries and Agricultural Research (ILVO), Belgium philippe.vanoverbeke@ilvo.
663 Pimentel-Bribiesca Luis
Forestry Department, Universidad Autónoma Chapingo, Mexico [email protected]
664 Ping Ai College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
665 Ping Li Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China [email protected]
666 Pingping Li Nanjing Forestry University, Nanjing, Jiangsu, China [email protected]
667 Pingyi Liu College of Engineering, China Agricultural University, Beijing, China [email protected]
668 PurwokoHari Kuncoro
The United Graduate School of Agricultural, Indonesia [email protected]
669 Qian Chen Northeast Agricultural University, Harbin, Heilongjiang, China [email protected]
670 Qian Zhang College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
255
671 Qian Zhang College of Mechanical Dynamics, Dalian Ocean University, Dalian, Liaoning, China [email protected]
672 Qiang Fu
International Joint Research Center for Persistent Toxic Substances (IJRC-PTS), School of Water Conservancy and Civil Engineering, Northeast Agricultural University, Harbin, China
673 Qiao Wei College of Engineering, China Agricultural University, Beijing, China [email protected]
674 Qiaoli Wang College of Engineering, Beijing Forestry University, Beijing, China
675 Qiaomin ChenNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
676 Qiaona PanCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
677 Qiaoxia Yuan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
678 Qichang YangInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China
679 Qin LiuNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
680 Qin Tong Royal Veterinary College, UK [email protected]
681 Qin Zhang Washington State University, USA [email protected]
682 Qing Dong College of Engineering, China Agricultural University, Beijing, China [email protected]
683 Qing Liu Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
684 Qing Liu College of Economics and Management, China Agricultural University, Beijing, China [email protected]
685 Qing Xie China Agricultural University, Beijing, China [email protected]
686 Qing YangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
687 Qinghua Han Chinese Academy of Agricultural Mechanization Sciences, Beijing, China
688 Qingjie Wang China Agricultural University, Beijing, China [email protected]
689 Qingmei CaoVehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China
690 Qingsong Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
691 Qingting Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
256
692 Qingwen Chen Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
693 Qingyan Wang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected]
694 Qingzhi Di College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
695 Qiong He College of Engineering, China Agricultural University, Beijing, China [email protected]
696 Qiong WuCollege of Information and Electrical Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China
697 Qiulin Ma College of Engineering, China Agricultural University, Beijing, China [email protected]
698 Quan Jia Chinese Academy of Agricultural Mechanization Sciences [email protected]
699 Quanrong Jing Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
700 Quendler Elisabeth University of Natural Resources and Life Sciences, Austria
701 R. Cengiz Akdeniz Ege University, Turkey [email protected]
702 Radhey Lal Kushwaha University of Saskatchewan, Canada [email protected]
703 Ran Chen Shanghai Jiaotong University, Shanghai, China [email protected]
704 Randall Joseph Renze John Deere, USA RenzeRandallJ@JohnDeere.
com
705 Rani Kumudini Indian Ministry of Agriculture, India
706 Ratti Cristina Laval University, Canada [email protected]
707 Ravi RatnayakeTrade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific
708 Rebogile R. Mphahlele Postharvest Technology Research, South Africa [email protected]
709 Ren Du North China Institute of Airspace Engineering, Langfang, Hebei, China [email protected]
710 Renfu Lu USDA/ARS, USA [email protected]
711 Reng LiangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
712 Reyes Parra Juan Esteban Universidad del Bío-Bío, Chile [email protected].
ubiobio.cl
713 Ricardo Darío Villalobos Carvajal Universidad del Bío-Bío, Chile [email protected]
714 Ricardo Oliano De Carvalho Federal University of Pelotas, Brazil [email protected].
br
257
715 Richard John Godwin Royal Academy of Engineering, UK dickjillgodwin@waitrose.
com
716 Rika Kitamura Utsunomiya university, Japan [email protected]
717 Robin Paul INRA, France [email protected]
718 Roland W. Melse Wageningen University, New Zealand [email protected]
719 Roman Galik Slovak University of Agriculture in Nitra, Faculty of Engineering, Slovakia [email protected]
720 Rong Xiang China Jiliang University, Hangzhou, Zhejiang, China [email protected]
721 Rong Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
722 Rui Zhang Jilin University, Changchun, Jilin, China [email protected]
723 Ruihua Wei Tongji University, Shanghai, China [email protected]
724 Ruili Wang Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
725 Ruiwen Liu Chinese Society for Agricultural Machinery, China [email protected]
726 Ruixiao Cui College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
727 Ruixiu Sui USDA-ARSCPSRU, USA [email protected]
728 Ruizhi Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
729 Rune Røjgaard Andreasen Danish Agriculture & Food Council, Denmark [email protected]
730 Runmao WangSecretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China
731 Salvador Calvet Universitat Politecnica de Valencia, Spain [email protected]
732 Sandro Liberatori Italian Body for Agricultural Mechanization and Engineering, UN
733 Sang Hun Kim Kangwon National University, Republic of Korea [email protected]
734 Sarfert Andreas GKN Land Systems, Germany [email protected]
735 Se Woon Hong M3-BIORES, KULeuven, Republic of Korea [email protected]
736 Sebastian Kemper TU Braunschweig, Germany [email protected]
737 Segura Ponce Luis Andrés Universidad del Bío-Bío, Chile [email protected]
738 Seiichi Oshita The University of Tokyo, Japan [email protected]
739 Seiji Matsuo The University of Tokyo, Japan [email protected]
740 Seishi Ninomiya The University of Tokyo, Japan [email protected]
258
741 Sennan SongDepartment of Vehicle Engineering, College of Engineering, China Agricultural University, Beijing, China
742 Seong-Heon Kim Gyeongsang National University, Republic of Korea [email protected]
743 Serkan Boyar Dept . of Agricul tura l Machinery, Fac. Of Agriculture, Süleyman Demirel Univ., Turkey [email protected]
744 Seth Manuwa Landmark University, Omuaran, Nigeria [email protected]
745 Seyhun Yurdugul Abant Izzet BAYSAL University, Turkey [email protected]
746 Sha Li Dalian Ocean University, Dalian, Liaoning, China [email protected]
747 Sha Liu College of Engineering, China Agricultural University, Beijing, China [email protected]
748 Shan LiInstitute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China
749 Shangfeng Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
750 Shanjun Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
751 Shanshan Qiu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected]
752 Shanshan Song College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
753 shanshan Yan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
754 Shanshan YuNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
755 Shanshan Zhou College of Resources and Environment, Northwest A&F University, Yangling, Shaanxi, China [email protected]
756 Shaochun Ma Washington State University, USA [email protected]
757 Shaohua Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
758 Shaojin WangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
759 Shaolong Wang Northeast Agricultural University, Harbin, Heilongjiang, China
760 shaoping han Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected]
761 Shaoping Qian Zhejiang University, Hangzhou, Zhejiang, China [email protected]
762 Shaozhong Kang China Agricultural University, Beijing, China [email protected]
763 Shaozhong LvCollege of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
259
764 Shasha Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
765 Shemshura Olga N.
Institute of Microbiology and Virology, Committee of Science, Ministry of Science and Education, Almaty, Republic of Kazakhstan
766 Sheng Liu Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected]
767 Sheng Yin Beijing Technology and Business University, Beijing, China [email protected]
768 Shenghuo JiaNational Seed Processing Equipment Engineering Technology Research Center, Jiuquan, Gansu, China
769 Shenglian Lu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
770 Shichun Jian Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
771 Shifang Wang Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
772 Shifeng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
773 Shifu ShuInstitute of Agricultural Engineering, Jiangxi Academy of Agricultural Sciences, Nanchang, Jiangxi, China
774 Shikun Sun Northwest A&F University, Yangling, Shaanxi, China [email protected]
775 Shili Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
776 Shiming Sun Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
777 Shiqiang Jia College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
778 Shouqi Yuan Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
779 Shouzhi GuoCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
780 Shu Liu The University of Tokyo, Japan [email protected]
781 Shuai DongCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
782 Shuai Wang College of Food Science and Technology, Shanghai Ocean University, Shanghai, China [email protected]
783 Shuangcheng Tang Xi'an University of Technology, Xi'an, Shaanxi, China [email protected]
784 Shufa ChenCollege of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang, Jiangsu, China
785 Shufeng Han Deere & Co., USA [email protected]
260
786 Shuhua Li Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
787 Shuhua Wang Shanxi Academy of Agricultural Sciences, Taiyuan, Shanxi, China [email protected]
788 Shujin Qiu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
789 Shujun Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
790 Shujun Zhang School of Computing and Technology, UK [email protected]
791 Shulin ChenSchool of Chemical and Biological Engineering, Washington State University, Pullman, WA 99164, USA
792 Shulin Hou College of Engineering, China Agricultural University, Beijing, China [email protected]
793 Shumao Wang College of Engineering, China Agricultural University, Beijing, China [email protected]
794 Shun Ren College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
795 Shun Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
796 Shuping Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
797 Shuqi Shang Qingdao Agricultural University, Qingdao, Shandong, China [email protected]
798 Shusheng XuCollege of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China
799 Shuso Kawamura Hokkaido University, Japan [email protected]
800 Shuwen Wang Northeast Agricultural University, Harbin, Heilongjiang, China [email protected]
801 Shuxi Tang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
802 Shuzhan Wang Henan University of Technology, Zhengzhou, Henan, China
803 Shuzhen Hu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
804 Shuzhi Yuan China Agricultural University, Beijing, China [email protected]
805 Si Chen School of Food Science and Biotechnology, Zhejiang Gongshang University, Zhejiang, China [email protected]
806 Silvio Lima INOVAGRI Institute, Brazil [email protected]
807 Solhee Kim Seoul National University, Republic of Korea [email protected]
808 Solowiej Piotr University of Warmia and Mazury, Poland [email protected]
809 Songbai Ma College of Engineering, China Agricultural University, Beijing, China [email protected]
261
810 Songchao ZhangNanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
811 Songhao ShangState Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing, China
812 Songhuai Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
813 Songming ZhuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
814 Søren Pedersen University of Aarhus, Denmark [email protected]
815 Sovatna Phon Kyushu University, Cambodia [email protected]
816 Sreekala Bajwa North Dakota State University, USA [email protected]
817 Stefan Mihina Slovak University of Agriculture, Slovakia [email protected]
818 Stefan Pogran Slovak University of Agriculture in Nitra, Slovakia [email protected]
819 Stegmaier Thomas ICBE, Germany thomas.stegmaier@itv-
820 Stella Vieira Biological Inst i tute, Experimental Center, Campinas, SP, Brazil [email protected]
821 Stephane Godbout IRDA, Canada [email protected]
822 Stephen Searcy Texas A&M University, USA [email protected]
823 Steven R. Evett USDA Agricultural Research Service, USA [email protected]
824 Steven Taylor Auburn University, USA [email protected]
825 Stone Kenneth USDA-ARS, USA [email protected]
826 Subo Tian College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
827 Suchao Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
828 Sue Nokes University of Kentucky, USA [email protected]
829 Sui Tan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
830 Suming Chen Taiwan Agricultural Mechanization Research and Development Center, Taiwan, China [email protected]
831 Sun Baoxia South China Agricultural University [email protected]
832 Sun Sun Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
833 Sunok Chung Precision Agricultural Research Center, China Agricultural University, Beijing, China [email protected]
834 Suxian Yang Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
262
835 Suzhen WangNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
836 Svend Morsing SKOV, Denmark [email protected]
837 Tabilo Munizaga Gipsy Elizabeth Universidad del Bío-Bío, Chile [email protected]
838 Tadeusz Juliszewski [email protected]
839 Taehwan Ha Seoul National University, Republic of Korea [email protected]
840 Tammo Steenhuis Cornell University, USA [email protected]
841 Tao Cui College of Engineering, China Agricultural University, Beijing, China [email protected]
842 Tao Lin University of Illinois at Urbana-Champaign, USA [email protected]
843 Tao WenCollege of Mechanical & Electrical Engineering, Centra l South Univers i ty of Fores t ry and Technology, Changsha, Hunan, China
844 Tao Wu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
845 Tao Xu Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
846 Taotao Mao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
847 Tavs Nyord Aarhus University, Denmark [email protected]
848 Teixeira Arthur University of Florida, USA [email protected]
849 Teng Ma Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
850 Teng Teen Lim University of Missouri, USA [email protected]
851 Tengfei Li College of Engineering, China Agricultural University, Beijing, China [email protected]
852 Terry Howell, Jr. American Society of Agricultural and Biological Engineers, USA [email protected]
853 Theodoros Gialamas Technological Educational Institute, Greece [email protected]
854 Thomas Banhazi University of Southern Queensland, Australia [email protected]
855 Thomas Hanskarl Heinrich Jungbluth Germany Thomas.jungbluth@uni-
hohenheim.de
856 Thomas J. Trout USDA Agricultural Research Service, USA [email protected]
857 Thurner StefanInstitute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany
858 Tianhu Liu South China Agricultural University, Guangzhou, China [email protected]
263
859 Tianjun Jing College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
860 Tiansheng Su Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
861 Tianshuai WangWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
862 Tiantao FengCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
863 Tianyao Xu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
864 Tianying Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
865 Tie Shi Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
866 Tiezhong Zhang China Agricultural University, Beijing, China [email protected]
867 Timothy Simalenga
1Centre for Coordina t ion of Agr icul tura l Research and development for Southern Africa (CCARDESA), Gaborone, Botswana
868 Ting Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
869 Ting Yang Xi'an University of Technology, Xi'an, Shaanxi, China [email protected]
870 Tingmin Yu ARC, South Africa [email protected]
871 Tingting NingInstitute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China
872 Tong ChenCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
873 Tong Sun College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China [email protected]
874 Tonghai Liu Tianjin Agricultural University, Tianjin, China [email protected]
875 Toshinori Kimura Hokkaido University, Japan [email protected]
876 Tuo ZhaoChina Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China
877 Ukhyeon YEO Seoul National University, Republic of Korea [email protected]
878 Ulrike Schimpf Institute of Agricultural and Urban Ecological, Germany
879 Umezuruike Linus Opara Stellenbosch University, South Africa [email protected]
880 Vadim Tsukor University of Applied Sciences Osnabrueck, Germany [email protected]
264
881 Van der Heyden Caroline Ghent University, Belgium caroline.vanderheyden@
ugent
882 Vilas Mahadeo Salokhe Kaziranga University, India [email protected]
883 Vladimir Krocko Slovak University of Agriculture in Nitra, Slovakia [email protected]
884 Vladimir Rataj Slovak University of Agriculture in Nitra, Slovakia [email protected]
885 Vladislav Minin State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, Russia [email protected]
886 Wang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China
887 Wanglin He Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected]
888 Wangyuan Zong College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
889 Wanlin Gao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
890 Wegener Malcolm The University of Queensland, Australia [email protected]
891 Wei Chen Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected]
892 Wei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
893 Wei Deng Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
894 Wei Guo The University of Tokyo, Japan [email protected]
895 Wei Hu Tianjin Agricultural Machinery Development and Service Center, Tianjin, China [email protected]
896 Wei Jiao Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected]
897 Wei Li College of Engineering, China Agricultural University, Beijing, China [email protected]
898 Wei Lin Jilin University, Changchun, Jilin, China [email protected]
899 Wei Liu College of Engineering, China Agricultural University, Beijing, China [email protected]
900 Wei Lu College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
901 Wei Song Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
902 Wei Tang China Agricultural University, Beijing, China [email protected]
903 Wei Wang College of Engineering, China Agricultural University, Beijing, China [email protected]
904 Wei Wang Col lege of Water Conservancy, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
905 Wei Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected]
265
906 Wei XiangOffice of Teaching and Research in Agricultural Machinery , Hunan Agricultural University, Changsha, Hunan, China
907 Wei YangFaculty of Modern Agriculture Engineering, Kunming University of Science and Technology, Kunming, Yunnan, China
908 Wei Zhang Civil Aviation University of China, Tianjin, China [email protected]
909 Wei Zhu College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected]
910 Wei Zou Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
911 Weidong Ding Bureau of Agricultural Mechanization Management, Xinjiang Production and Construction Corps, China [email protected]
912 Weidong Jiang Shandong Wuzheng Group, China [email protected]
913 Weidong Shi Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
914 Weidong ZhuangCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China
915 Weihong Min Jilin Agricultural University, Changchun, Jilin, China [email protected]
916 Weihua Qin College of Electromechanical Engineering, Henan Agricultural University, Henan, China [email protected]
917 Weijun Tian Jilin University, Changchun, Jilin, China [email protected]
918 Weimin Zhang College of Food Science and Technology, Hainan University, Haikou, Hainan, China [email protected]
919 Weipeng Zhang China Agricultural University, Beijing, China [email protected]
920 Weiping Bi College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
921 Weiping Liu College of Resources and Environment, Southwest University, Chongqing, China [email protected]
922 Weiqiang Fu National Research Center of Intelligent Equipment for Agriculture, Beijing, China [email protected]
923 Weiqiao Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
924 Weitang Song College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
925 Weiwei Si Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
926 Weiwei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
927 Weixia Zhao China Institute of Water Resources and Hydropower Research, Beijing, China
928 Weixin ZhangInstitute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China
266
929 Weixing ZhuInstitute of Agricultural Electrification and Automation, Jiangsu University, Zhenjiang, Jiangsu, China
930 Weixiong WuCollege of Engineering, South China University of Technology/College of Mechanical and Electronic Engineering, Sichuan Agricultural University
931 Wen HanCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
932 Wenchao Lu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
933 Wenhai Wang College of Economics and Management, China Agricultural University, Beijing, China [email protected]
934 Wenhua Mao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
935 Wenhui Cui College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
936 Wenjing Ling College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
937 Wenlong Cao Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China [email protected]
938 Wenming Zong College of Engineering, Anhui Agricultural University, Hefei, Anhui, China [email protected]
939 Wenxiu Wang College of Engineering, China Agricultural University, Beijing, China [email protected]
940 Wenyu Yi Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China [email protected]
941 Wenyu ZhangInstitute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China
942 Wenzhuo Wang College of Engineering, China Agricultural University, Beijing, China [email protected]
943 Xia Li College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
944 Xian Li Chinese Academy of Agricultural Sciences, Beijing, China [email protected]
945 Xian Liu Center for Agricultural Mechanization Technology Development and Extension, MOA, China [email protected]
946 Xianfa Fang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
947 Xiang YinS c h o o l o f L i g h t I n d u s t r y & A g r i c u l t u r e Engineering, Shandong University of Technology, Zibo, Shandong, China
948 Xiangcai Zhang China Agricultural University, Beijing, China [email protected]
949 Xiangdong Liu College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
950 Xiangdong ShenWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
267
951 Xianghai Yan Henan University of Technology, Zhengzhou, Henan, China [email protected]
952 Xianghong GuoCollege of Water Conservancy Sciences and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi, China
953 Xiangjiang Liu Zhejiang University, Hangzhou, Zhejiang, China [email protected]
954 Xiangjun Zou South China Agricultural University, Guangzhou, China [email protected]
955 Xiangqian DongDepartment of agricultural engineering, College of Engineering, China Agricultural University, Beijing, China
956 Xiangyu Song Sensors and Data Analysis Department, Lely Industries N.V., Maassluis, the Netherlands [email protected]
957 Xianqi Li College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China [email protected]
958 Xiansheng Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
959 Xianwang LiNanjing Research Institute for Agriculture Mechanization,Ministry of Agriculture, Nanjing, Jiangsu, China
960 Xiao Gao China Agricultural University, Beijing, China [email protected]
961 Xiao Liu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
962 Xiao TanSchool of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China
963 Xiao YangWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
964 Xiaobo Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected]
965 Xiaobo Zou School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
966 Xiaochao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
967 Xiaodan Wu Nanchang University, Nanchang, Jiangxi, China [email protected]
968 Xiaodong Gao Northwest A&F University, Yangling, Shaanxi, China [email protected]
969 Xiaodong Guan Chinese Society for Agricultural Engineering, China [email protected]
970 Xiaodong Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
971 Xiaodong Qiao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
972 Xiaodong RenWater Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
268
973 Xiaodong ZhangCollege of Mechanical Engineering, Liaoning University of Petro-Chemical Technology, Fushun, Liaoning, China
974 Xiaofeng Li College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected]
975 Xiaohong Lee College of Economics and Management, China Agricultural University, Beijing, China [email protected]
976 Xiaohui Qian Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
977 Xiaohui Zhang College of Mechanical Engineering, Shangdong Agricultural University, Tai'an, Shandong, China [email protected]
978 Xiaojiang ZhuBureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Ningxia, China
979 Xiaojun Shen Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected]
980 Xiaokang Li Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected]
981 Xiaoli Liu China Agricultural University, Beijing, China [email protected]
982 Xiaolin Zhan College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
983 Xiaoling SuCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
984 Xiaomin Mao China Agricultural University, Beijing, China [email protected]
985 Xiaoming Wang Guangxi Academy of Agricultural Mechanization Sciences, China [email protected]
986 Xiaoming Wei Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
987 Xiaopeng Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
988 Xiaoping Bai Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected]
989 Xiaoping Jin College of Engineering, China Agricultural University, Beijing, China [email protected]
990 Xiaoqiang DuFaculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China
991 Xiaorong LvCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China
992 Xiaoshun Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected]
993 Xiaoxia Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
994 Xiaoying Yu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
269
995 Xiaoyu Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
996 Xibin DingCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
997 Ximei TianSecretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China
998 Xin He College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
999 Xin Lu Henan Academy of Agricul tural Sciences, Zhengzhou, Henan, China [email protected]
1000 Xin MaoCollege of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China
1001 Xin Wang University of Shanghai for Science and Technology, Shanghai, China [email protected]
1002 Xin Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1003 Xin Wang China Agricultural University, [email protected]
1004 Xin YAN China Institute of Water Resources and Hydropower Research, Beijing, China [email protected]
1005 Xin Zhang Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
1006 Xin Zhang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1007 Xin ZhangCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
1008 Xin'an Zeng Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China [email protected]
1009 Xinfeng Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1010 Xing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1011 Xing Ma Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
1012 Xingjian Sun Tongji University, Shanghai, China [email protected]
1013 Xingjian Zuo Northwest A&F University, Yangling, Shaanxi, China [email protected]
1014 Xingyao Hao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
1015 Xinhui Wu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
1016 Xining Zhao Northwest A&F University, Yangling, Shaanxi, China [email protected]
1017 Xinjin Li Jiangxi Institute of Agricultural Mechanization Sciences, China [email protected]
270
1018 Xinqun Zhou Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1019 Xinxin LiSchoo l o f Med ica l I n s t rumen t and Food Engineering, University of Shanghai for Science and Technology, Shanghai, China
1020 Xiong ZhaoFaculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China
1021 Xiongzhe Han Seoul National University, Republic of Korea [email protected]
1022 Xiulun Wang Mie University, Japan [email protected]
1023 Xiumei Tang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected]
1024 Xiuying Cao Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1025 Xiuying Tang College of Engineering, China Agricultural University, Beijing, China [email protected]
1026 Xiwen Luo South China Agricultural University, Guangzhou, China [email protected]
1027 Xiyin Gao College of Mechanical Engineering, Agricultural University of Heibei, Baoding, Hebei, China [email protected]
1028 Xu Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1029 Xu Ma College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1030 Xu Sun College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
1031 Xu ZhangCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
1032 Xuan WangCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
1033 Xuebin Qi Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China
1034 Xuecheng Zhou College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1035 Xuefeng Diao Sichuan Provincial Agricultural Department, Sichuan, China
1036 Xuegeng Chen Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China [email protected]
1037 Xueguan Zhao China Agricultural University, Beijing, China [email protected]
1038 Xuejun Yang Modern Agricultural Equipment Co.,Ltd., Beijing, China [email protected]
1039 Xueling Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1040 Xueping Li College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
271
1041 Xueshuang Shi College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1042 Xuewei Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
1043 Xujun Ye Hirosaki University, Japan [email protected]
1044 Xunlan Li Citrus Research Institute, Southwest University, Chongqing, China [email protected]
1045 Xuying LiCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
1046 Ya Xin Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1047 Yading Wang Institute of Bio-Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
1048 Yajiao Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1049 Yaliang NiuDepartment of Electrical Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China
1050 Yamei WuHohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China
1051 Yameng XueInstitute of Food Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China
1052 Yan LongCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
1053 Yan Yu Qingdao Agricultural University, Qingdao, Shandong, China [email protected]
1054 Yanbin LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1055 Yanchao Zhang Zhejiang University [email protected]
1056 Yanchen Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1057 Yanfei Cao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1058 Yanfeng Li China Institute of Water Resources and Hydropower Research, Beijing, China [email protected]
1059 Yang Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1060 Yang Ju College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected]
1061 Yang Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China
1062 Yang Liu Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
272
1063 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1064 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1065 Yang Tao Department of Bioengineering, University of Maryland, USA
1066 Yang Xu College of Engineering, China Agricultural University, Beijing, China [email protected]
1067 Yang Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1068 Yang Yu School of Water Resources and Environment, China University of Geosciences, Beijing, China [email protected]
1069 Yangchun Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1070 Yangtai Liu University of Shanghai for Science and Technology, Shanghai, China [email protected]
1071 Yanhai Tang Institute of Bio-Mechanical Electronic Engineering, Zhejiang University, Hangzhou, Zhejiang, China [email protected]
1072 Yanhao Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1073 Yankun Peng College of Engineering, China Agricultural University, Beijing, China [email protected]
1074 Yanlei Yu Zhejiang Gongshang University, Hangzhou, Zhejiang, China [email protected]
1075 Yanlin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1076 Yanqun Zhang China Institute of Water Resources and Hydropower Research, Beijing, China
1077 Yanru Guo College of Food Science and Technology, Shanghai Ocean University, Shanghai, China [email protected]
1078 Yanru Zhao Zhejiang University, Hangzhou, Zhejiang, China [email protected]
1079 Yanshui Zhao YTO Group Corporation, China [email protected]
1080 Yanwen Lu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1081 Yanxiang ZhuResearch center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China
1082 Yanyao Wang Qingdao Agricultural University, Qingdao, Shandong, China [email protected]
1083 Yao Li Hohhot Vocational College, Hohhot, Inner Mongolia, China [email protected]
1084 Yao Wu Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected]
1085 Yaolun Zhang Faculty of Science and Technology, University of Macau, Macau, China [email protected]
1086 Yaoming Li Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
273
1087 Yapeng Li College of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
1088 Yaqin Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
1089 Yawei Ren Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1090 Yawei Zhang College of Engineering, China Agricultural University, Beijing, China [email protected]
1091 Yazhe Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]
1092 Yeseong Kang Gyeongsang University, Republic of Korea [email protected]
1093 Yeseul Jo Seoul National University, Republic of Korea [email protected]
1094 Yi ZhangInst i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China
1095 Yi Zhao China Agricultural University, Beijing, China [email protected]
1096 Yibao Ou Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
1097 Yibin YingFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China
1098 Yi-Chich Chiu National Ilan University, Taiwan, China [email protected]
1099 Yichuan Gao Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China [email protected]
1100 Yifan HeCol lege of Food Sc ience and Nut r i t iona l Engineering, China Agricultural Engineering, Beijing, China
1101 Yifei Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1102 Yikui Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
1103 Yimin WeiInstitute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China
1104 Yingchao Chen YTO Group Corporation, China [email protected]
1105 Yingchun FuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1106 Yingda Fu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
1107 Yingquan ZhangInstitute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China
1108 Yingyi Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
274
1109 Yingyu Liu School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China [email protected]
1110 Yinhong KangCol l ege o f In fo rma t ion and Eng inee r ing Technology, Sichuan Agricultural University, Ya'an, Sichuan, China
1111 Yitao Liao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1112 Yitian Zang China Agricultural University, Beijing, China [email protected]
1113 Yiwei DongIns t i tu te of Environment and Susta inable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China
1114 Yixiang Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1115 Yiyuan Ge College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
1116 Yong Wu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1117 Yong Zhao Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
1118 Yongchang Yu College of Mechanical Engineering, Henan Agricultural University, Zhengzhou, Henan, China [email protected]
1119 Yongcheng Jiang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
1120 Yongchong Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1121 Yonghong Yu Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
1122 Yong-Joo Kim Chungnam National University, Republic of Korea [email protected]
1123 Yongjun Zheng College of Engineering, China Agricultural University, Beijing, China [email protected]
1124 Yonglei Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1125 Yongqian Ding Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected]
1126 Yongqian Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1127 Yongqiang Cheng China Agricultural University, Beijing, China [email protected]
1128 Yongqing Du Gansu Bureau of Agricultural Mechanization Management, China [email protected]
1129 Yongsen Xiong Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected]
1130 Yongsheng ChenNanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China
1131 Yongwei WangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
275
1132 Yoshisuke Kishida Shin-Norinsha Co., Ltd, Japan [email protected]
1133 Youchun Ding College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1134 Youqiang Shen Tianjin Tractor Manufacturing Corporation, Ltd., China [email protected]
1135 Yu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1136 Yu Liu Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
1137 Yu Ru Nanjing Forestry University, Nanjing, Jiangsu, China [email protected]
1138 Yu Ya-xin Zhejiang Sci-Tech University, [email protected]
1139 Yu Zhang Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan [email protected]
1140 Yuan Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1141 Yuanjun Fan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1142 Yubao Wang Northwest A&F University, Yangling, Shaanxi, China [email protected]
1143 Yubin Lan USDA-ARS, USA [email protected]
1144 Yue Gao Jilin University, Changchun, Jilin, China [email protected]
1145 Yue GuoBureau of Agricultural Machinery, Department of Agriculture and Animal Husbandry, Inner Mongolia, China
1146 Yue Yu Zhejiang University, Hangzhou, Zhejiang, China [email protected]
1147 Yuebin Yan Anhui Institute of Agricultural Mechanization Sciences, China
1148 Yueming Yuan Jilin Agricultural University, Changchun, Jilin, China [email protected]
1149 Yueqin LiuCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
1150 Yuexia Chen College of Vehicle and Traffic Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
1151 Yufei Jin Department of Marketing, Huiju China, Beijing, China [email protected]
1152 Yuhan Lin China Agricultural University, Beijing, China [email protected]
1153 Yuhuan Liu Nanchang University, Nanchang, Jiangxi, China [email protected]
1154 Yun Ding College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
1155 Yun Zhou China Agricultural University, Beijing, China [email protected]
1156 Yunpu Wang School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China [email protected]
276
1157 Yunwu Xiong China Agricultural University, Beijing, China [email protected]
1158 Yunxia Wang Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected]
1159 Yunxiang Ye Washington State University, USA [email protected]
1160 Yuqiu Song Shenyang Agricultural University, Shenyang, Liaoning, China [email protected]
1161 Yuxuan Tian College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1162 Yuying Yan University of Nottingham, UK [email protected].
1163 Za Kan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
1164 Zaichun ZhuangCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1165 Zarei ElmiraCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1166 Zdenko Tkac Slovak University of Agriculture in Nitra, Slovakia [email protected]
1167 Zebing Xing Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
1168 Zeliha Bereket Barut
Cukurova University, Faculty of Agriculture, Department of Agricultural Machinery, Adana, Turkey
1169 Zengde Han Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
1170 Zengling Yang College of Engineering, China Agricultural University, Beijing, China [email protected]
1171 Zhandong Liu Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected]
1172 Zhanfeng HouCollege of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China
1173 Zhangbing Zhu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1174 Zhangying YeCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1175 Zhanhua Song Shandong Agricul tural Universi ty, Tai 'an, Shandong, China [email protected]
1176 Zhanming LiCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1177 Zhanyong Li Tianjing University of Science and Technology, Tianjin, China [email protected]
1178 Zhaodong Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
277
1179 Zhaohua HouInstitute of Special Animal and Plant Sciences of China Academy of Agricultural Sciences, Changchun, Jilin, China
1180 Zhaolei ZhangCollege of Mechanical and Electronic Engineering, Shandong Agricul tural Universi ty, Tai 'an, Shandong, China
1181 Zhen Li Kyushu University, Japan [email protected]
1182 Zhen Li Bei j ing Research Cente r fo r In format ion Technology in Agriculture, Beijing, China [email protected]
1183 Zhen LiCollege of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China
1184 Zhen Zhang Fujian Academy of Agricultural Mechanization Sciences, China [email protected]
1185 Zhenbang Wang Beijing Municipal Bureau of Agriculture, China [email protected]
1186 Zhenbo Li China Agricultural University, Beijing, China [email protected]
1187 Zhenbo WeiFaculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China
1188 Zhendong Ke Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected]
1189 Zheng Lou Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1190 Zheng Ma Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
1191 Zheng Yan Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1192 Zhengbin Zhao Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
1193 Zhengbo Zhu South China Agricultural University, Guangzhou, China [email protected]
1194 Zhenghe Song China Agricultural University, Beijing, China [email protected]
1195 Zhenhua Duan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected]
1196 Zhenjiang Zhou Department of Agro-ecology, Aarhus, Denmark [email protected]
1197 Zhenwei Liang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
1198 Zhenxiang XingCol lege of Water Conservancy and Civ i l Engineering, Northeast Agricultural University, Harbin, China
1199 Zhenxin Zhang Chinese Society for Agricultural Machinery, China [email protected]
1200 Zhenzhen Pang Hainan University, Haikou, Hainan, China [email protected]
1201 Zhi Qu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
278
1202 Zhi Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1203 Zhi Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
1204 Zhifen Di Chinese Academy of Agricultural Engineering, Beijing, China [email protected]
1205 Zhigang Wang Jilin University, Changchun, Jilin, China [email protected]
1206 Zhigang Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1207 Zhihua Cheng College of Engineering, China Agricultural University, Beijing, China [email protected]
1208 Zhihui Gao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected]
1209 Zhijie Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1210 Zhi-Ming GuoIntelligent Detection Department, National Engineering Research Center for Information Technologies in Agriculture, China
1211 Zhiming LuCollege of Information Science and Engineering, Shanxi Agricultural University, Taigu, Shanxi, China
1212 Zhiming Wang Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected]
1213 Zhining Wang China Agricultural University, Beijing, China [email protected]
1214 Zhiping DiCollege of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China
1215 Zhiqi Zheng College of Engineering, China Agricultural University, Beijing, China [email protected]
1216 Zhiqiang XiVehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China
1217 Zhiwei Liu South China University of Technology, Guangzhou, China [email protected]
1218 Zhiwei Zhu South China University of Technology, Guangzhou, China [email protected]
1219 Zhiyan Zhou Agriculture and Aviation Engineering Center, South China Agricultural University, Guangzhou, China [email protected]
1220 Zhiyong ZouCollege of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China
1221 Zhiyuan Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1222 Zhong Han Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China [email protected]
1223 Zhong ZhouCollege of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China
279
1224 Zhongjia Chen Beijing Forestry University, Beijing, China [email protected]
1225 Zhongli PanDepartment of Biological and Agricultural Engineering, University of California, Davis (UC Davis)
1226 Zhongliang Zhao Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected]
1227 Zhongwei Liang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1228 Zhongxiang Zhu China Agricultural University, Beijing, China [email protected]
1229 Zhou Fan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]
1230 Zhou Haibo College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected]
1231 Zhou Yang College of Engineering, South China University of Technology, Guangzhou, Guangdong, China [email protected]
1232 Zhuang Wang Jiangsu University, Zhenjiang, Jiangsu, China [email protected]
1233 Zhuo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected]
1234 Zhuqing Ding College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected]
1235 Zihao LiuCollege of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China
1236 Ziyang Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected]
1237 Zunfeng Tang Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected]
1238 Zuoxi Zhao College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected]
1239 Zusongying Zhao College of Engineering, China Agricultural University, Beijing, China [email protected]