sepro blackhawk 100 cone crushers · the sepro blackhawk 100 cone crusher is a modern,...
TRANSCRIPT
S E P R O B L A C K H A W K 1 0 0 C O N E C R U S H E R S
1
A P P L I C A T I O N S
Mining
■ Ball mill feed, pebble crushing
Aggregates
■ Road, concrete, asphalt, mining haul roads
■ Secondary or tertiary crushing applications
K E Y A D V A N T A G E S
■ High quality components
■ Durable and compact design
■ Readily available spare parts
■ Fast delivery schedule
■ High capacity for small head diameter (690 mm)
■ High speed, eccentric throw
■ High horsepower motor (90 kW)
■ Does not require sheaves and v-belts
■ Simplified operation and maintenance
■ Variable speed drive included
■ Patented (pending) tension lock bolt arrangement
creates tension around top bolt for liner retention
■ Dual action hydraulic cylinder and hydraulic adjustment
OPTIMIZED DESIGN PAIRED WITH PROVEN DURABILITY
The Sepro Blackhawk 100 Cone Crusher is a modern,
hydraulically operated cone crusher designed to be simple,
rugged and effective for heavy duty mining and aggregate
applications. The combination of the speed and eccentric
throw of the crusher provides fine crushing capability and
high capacity in a very compact design. The Blackhawk is
capable of being applied as a secondary or tertiary crusher
as well as a pebble crusher.
The Blackhawk 100 is driven directly via a flexible coupling
to the electric drive motor. This arrangement eliminates
the need for sheaves and v-belts, allowing for simplified
operation and maintenance. A variable speed drive
package is included to optimize the speed of the machine
to the given liner profile, feed and production conditions.
The patented (pending) lock bolt design for holding the
cone liner in place eliminates the need for a torch or
burning ring. Any potential for damage during liner changes
is also eliminated.
In the event of tramp material entering the crusher, the
hydraulic cylinder allows for the release of the material.
For larger material the cylinder may be engaged to clear
the chamber.
B L A C K H A W K 1 0 0 S P E C I F I C A T I O N S
CLOSED SETTING (mm)TONNES / 8 10 13 16 19 22 25 32 POWER WEIGHT
HOUR (5/16") (3/8") (1/2") (5/8") (3/4") (7/8") (1") (1¼") (kW) (Kg)
Mtph 45-65 50-75 55-85 65-95 70-100 75-105 80-115 95-145 90 7700
MAXIMUM MINIMUM CRUSHER FEED DISCHARGE CAVITY OPENING SETTING SELECTION (mm) (mm)
FINE 105 8
MEDIUM 119 10
COARSE 142 16
S E P R O B L A C K H A W K 1 0 0 C O N E C R U S H E R S
Note: Specifications are job/project dependent and/or application
specific. Please check with Sepro sales representative.
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
REV 03 • 08/12/2015
FeedOpening
DischargeSetting
FEED SIZE UP TO 600 MM WITH A SUPERIOR MECHANICAL DRIVE SYSTEM
Sepro Tyre Drive Scrubbers feature a rugged, simple design and incorporate robust components to give low capital and operating costs combined with high availability. Operating in many applications on feeds with high clay contents, Sepro Scrubbers are well proven as the optimum choice for difficult ore and stone washing duties. The variable frequency drive (VFD) package accompanying each unit allows you to fine tune the operation of the scrubber based on the application. No auxiliary drive is required to perform maintenance. Sepro Scrubber shells are manufactured in one piece to high quality standards and are thermally stress relieved to eliminate localized high stress areas.
The machine utilizes the Sepro Pneumatic Tyre Drive System (PTD) which provides an alternative to standard chain and gear drive systems. This system of rubber tyres mounted on independent gear boxes provides excellent serviceability and reliability, having been well proven in numerous difficult applications. An instrumental feature accompanying Sepro’s tyre driven equipment is the tyre pressure monitoring system (TPMS) which comes standard with each Sepro rotary control console.
Sepro operates pilot scale facilities, which generate reliable data for scale up to commercial operation. Pilot scale machines are also supplied for field test purposes.
S E P R O T Y R E D R I V E S C R U B B E R S
2
A P P L I C A T I O N S
■ Processing of wet tropical laterites prior to recovery of nickel
and cobalt
■ Washing of laterites to liberate fine precious metals for
gravity recovery
■ Removal of clay from hard rock ores prior to crushing
■ Washing of crushed aggregate, gravel and sand to remove
clay contamination
■ Cleaning of contaminated soil and rubble
K E Y A D V A N T A G E S
■ Short delivery times
■ Low installation costs with no heavy foundation requirements
■ No critical components such as ring gears, chain drive, steel
wheels or trunnion bearings
■ Standard, off-the-shelf major components to minimize
any downtime
■ Commercial heavy truck tyres that can easily be sourced locally
■ Units are all pre-assembled and shop tested
■ Rubber shell liners and lifters for long life and ease of replacement
■ Shell supported design allows for quick and efficient maintenance
S T A N D A R D S C R U B B E R S I Z E S
DIA. X L (m) INSTALLED POWER (kW)
1.2 x3.0 15
1.5 x 3.6 30
1.8 x 3.6 44
2.1 x 4.0 75
2.1 x 5.0 90
8 ft. x 14 ft. (2.4 x 4.2) 110*
2.5 x 6.0 135 – 165
3.0 x 8.0 220 – 300
3.6 x 10.0 450 – 550
3.6 x 12.0 540 – 660
*Engineered replacement for North American built 8 ft. x 14 ft. Scrubber.
S E P R O T Y R E D R I V E S C R U B B E R S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
Sepro Pneumatic Tyre Drive System (PTD)2.4 x 4.2 Sepro Scrubber
Thrust RingsHeavy Duty RubberLiner and Lifter barAssemblyFeed Chute
Heavy Duty One (1) PieceShell Weldment. ThermallyStress Relieved.
ConventionalHigh EfficiencyElectric Motor
HydraulicJacking Cradle
Optional TrommelScreen Discharge
Rubber LinedDischarge Cone
SegmentedDischargeThroat Liners
Rinse Water
Commercial Bevel /Helical Gear Box
Heavy StructuralBase Frame
Heavy DutyCommercialPneumatic Tyres
Custom EngineeredRim and HubAssembly
SHORT DELIVERIES AND LOW CAPITAL COST
Sepro Tyre Drive Grinding Mills are a reliable solution
for small and medium capacity grinding applications,
and are suitable for Ball, Rod and Pebble charges. Mills
come complete with a variable frequency drive (VFD)
package which allows you to fine tune the operation of
the mill based on the charge and application. No auxiliary
drive is required to perform maintenance, which is done
quickly with minimal heavy lifting due to the simple
removal of the grate or discharge head to access the
mill internals. Sepro Mill shells are manufactured in one
piece to high quality standards and are thermally stress
relieved to eliminate localized high stress areas.
The machine utilizes the Sepro Pneumatic Tyre Drive
System (PTD) which provides an alternative to standard
trunnion supported mills. This system of rubber tyres
mounted on independent gear boxes provides excellent
serviceability and reliability, having been well proven in
numerous difficult applications. An instrumental feature
accompanying Sepro’s tyre driven equipment is the tyre
pressure monitoring system (TPMS) which comes
standard with each Sepro rotary control console.
Pilot scale mills are also available for pilot plant
and laboratory use.
S E P R O T Y R E D R I V E G R I N D I N G M I L L S
3
A P P L I C A T O N S
■ Small tonnage plants – primary grinding
■ Regrinding mills
■ Reagent prep
■ Lime slaking
K E Y A D V A N T A G E S
■ Short delivery times
■ Low installation costs with no heavy foundation requirements
■ No critical components such as ring gears, chain drive, steel
wheels or trunnion bearings
■ Standard, off-the-shelf major components to minimize
any downtime
■ Commercial heavy truck tyres that can easily be sourced locally
■ Units are all pre-assembled and shop tested
■ Rubber shell liners and lifters for long life and ease of replacement
■ Shell supported design allows for quick and efficient maintenance
■ Various configurations available (overflow or grate discharge)
S T A N D A R D M I L L S I Z E S
DIA. X L (m) INSTALLED POWER (kW)
1.05 x 1.4 18
1.2 x 2.3 37
1.5 x 3.0 75
1.8 x 3.6 150
2.1 x 4.0 220
2.1 x 6.0 330
S E P R O T Y R E D R I V E G R I N D I N G M I L L S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
Sepro Pneumatic Tyre Drive System (PTD)1.8 x 3.6 Sepro Ball Mill
Feed Chute
Heavy Duty One (1) PieceShell Weldment. ThermallyStress Relieved.
ConventionalHigh EfficiencyElectric Motor
Commercial Bevel /Helical Gear Box
Heavy StructuralBase Frame
Heavy Duty RubberLiner and Lifter barAssembly
ThrustRings
Rubber LinedDischarge Cone
InspectionManhole
OVERFLOW VERSION
DischargeGrate
Custom EngineeredRim and HubAssembly
Heavy DutyCommercialPneumatic Tyres
COARSE AND FINE PRECIOUS METAL RECOVERY
Falcon SB Concentrators are known as “Semi-Batch” because they continually accept feed during the run cycle, but only produce concentrate during the periodic rinse cycles. Run times span from five minutes to several hours, depending on the application. Rinse times are generally less than a minute as Falcon Concentrators utilize a dynamic braking system to quickly slow the bowl down, rinse out the concentrate, and then return to full operational speed. Equipped with a variable frequency drive, this gravity concentrator can operate anywhere from 50 to 200 G’s.
The typical application for a Falcon SB Concentrator is recovering liberated precious metals (Au, Ag, Pt, etc.) within a grinding circuit. When installed in this type of circuit, Sepro often recommends that the gravity concentrator be placed on cyclone feed, rather than cyclone underflow to generate higher recoveries. Outside of grinding circuits, Falcon SB Concentrators are also used for precious metal separation from aggregate or placer deposits. The target mineral will usually be in extremely low concentration (grams per tonne) and a very high upgrade is desired (up to 10,000x).
Reliable test work can lead you to the right
concentrator for your application. Sepro operates
laboratory facilities, which generate decisive data
for scale up to commercial operation.
F A L C O N S E M I - B A T C H ( S B ) C O N C E N T R A T O R S
4
A P P L I C A T I O N S
■ Recovery of gold, silver and platinum group metals
■ Recovery of gold from cyclone feed, underflow or overflow
within the grinding circuit
■ Recovery of gold in alluvial gold operations
■ Recovery of gold from aggregate plants
K E Y A D V A N T A G E S
■ Unit capacities up to 400 t/h
■ The variable frequency drive (VFD) and a dynamic breaking
system are used to greatly reduce offline time for concentrate
flushing
■ Flat lid modular design increases wear life and reduces downtime
as well as maintenance costs
■ Upgraded standard fluidization control results in a higher degree
of machine management
■ High G forces (highest in the mineral processing industry) allow
for higher efficiency and the recovery of very fine material
■ Reduced water consumption as only the pertinent collection zone
section of the bowl is fluidized
■ Greater than 95% mechanical availability, extremely low
operating costs
■ Fully automated, “one touch” operation that provides the least
amount of offline time and highest possible concentrate security
S P E C I F I C A T I O N S
MODEL L40 SB400 SB750 SB1350 SB2500 SB5200
RECOMMENDED SOLIDS CAPACITY* t/h 0 - 0.25 1 - 15 10 - 80 50 - 150 100 - 250 200 - 400
MAX SLURRY CAPACITY m³/hr 2.3 30 100 200 300 450
CONCENTRATING SURFACE AREA m² 0.03 0.21 0.46 1.08 2.14 3.37
G-FORCE RANGE upper 200 150 200 200 200 200
lower 50 100 50 50 50 50
MACHINE WEIGHT kg 35 485 1 250 2 900 4 560 6 900
MOTOR POWER kW (HP) 0.4 (0.5) 3.7(5.0) 7.5 (10) 18 (25) 45 (60) 75 (100)
PROCESS WATER CONSUMPTION m³/hr 0.24 - 1.2 3 - 5 8 - 12 12 - 20 15 - 28 25 - 35
WATER SUPPLY PRESSURE bar 2 - 3 2 - 3 2 - 3 2 - 3 2 - 3 2 - 3
RECOMMENDED MAXFEED PARTICLE SIZE mm 1.0 2.0 2.0 2.0 2.0 2.0
ABSOLUTE MAXIMUM FEED PARTICLE SIZE* mm 1.5 2.5 4.0 4.0 4.0 4.0
MAXIMUM FEED PERCENT SOLIDS* % 55 - 70 65 55 - 70 55 - 70 55 - 70 55 - 70
CONCENTRATE SLURRY FLUSH VOLUME* litre 1 25 100 150 250 350
CONCENTRATE SOLIDS FLUSH VOLUME* cm³ 120 1 230 5 275 12 425 18 750 24 050
WIDTH m 0.49 1.02 1.71 2.24 2.67 3.19
DIMENSIONS LENGTH m 0.31 1.00 1.44 1.90 2.00 2.32
HEIGHT m 0.51 1.43 1.50 2.07 2.27 2.73
*Denotes application specific parameter, consult manufacturer.
Note: Specifications are subject to change without notice. Equipment may not operate or achieve best performance under maximum capacities.
F A L C O N S E M I - B A T C H ( S B ) C O N C E N T R A T O R S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
Tailings
Concentrate
FeedRinse Water
Rinse Manifold
Rinse Nozzle
Fluidization /RetentionZone
StratificatonZone
WATER
WATER
Feed
Feed Pipe
Concentrate
Tailings
Impeller /Baffle
ConcentrateDischarge PortsProcess Water
FORCES UP TO 600 G’S AND GRAVITY RECOVERY DOWN TO 3 MICRONS
Ultra fine mineral recovery has been an industry goal
for many years. With Falcon’s UF line of concentrators
there is now a way to economically recover and upgrade
particles as fine as three microns. The primary objective
of the Falcon UF concentrator is to scavenge ultra fine
particles that are typically rejected from plant processes
as slimes.
Using a variable lip controlled by air pressure the Falcon
UF Concentrator is extremely flexible, allowing for a wide
range in metallurgical operation from high recovery to
high upgrade. Rinse times are generally less than a minute
as Falcon equipment uses a variable frequency drive (VFD)
with a dynamic braking system to quickly slow the bowl
down, rinse out the concentrate, and then return to full
operational speed. Falcon UF Concentrators can operate
anywhere from 50 to 600 G’s. Operating in rougher-cleaner
or rougher-scavenger configurations, this concentrator
can provide an almost unlimited range of possibilities.
Reliable test work can lead you to the right
concentrator for your application. Sepro operates
laboratory facilities, which generate decisive data
for scale up to commercial operation.
F A L C O N U L T R A - F I N E ( U F ) C O N C E N T R A T O R S
4
A P P L I C A T I O N S
■ Recovery of ultrafine slimes (tin, tantalum, tungsten, etc.)
■ Scavenging from deslime cyclone overflow
■ High recovery upgrade of fine flotation concentrates
K E Y A D V A N T A G E S
■ High gravitational fields (up to 600 G) allows recovery of ultra
fine particles
■ The variable frequency drive (VFD) and a dynamic breaking system
are used to greatly reduce offline time for concentrate flushing
■ Recovery of previously unrecoverable values from
flotation concentrate
■ Advanced wear materials and a modular design decreases
downtime and reduces maintenance costs
■ No process water consumption during concentration
■ Greater than 95% mechanical availability, extremely low
operating costs
■ Small footprint
■ Fully automated, “one touch” operation that provides the least
amount of offline time and highest possible concentrate security
S P E C I F I C A T I O N S
MODEL UF600 UF1500
RECOMMENDED SOLIDS CAPACITY* t/h 0.5 2
MAX SLURRY CAPACITY m³/hr ~ 6 ~ 20
RECOMMENDED MAX FEED PARTICLE SIZE µm < 38 < 38
MINIMUM EFFECTIVE CAPTURE SIZE µm < 5 < 5
CONCENTRATE SLURRY VOLUME PER CYCLE litre ~ 50 ~ 200
RECOMMENDED PULP, PERCENT SOLIDS* % 5 - 15 5 - 15
CONCENTRATE SURFACE AREA cm2 3871 9680
G-FORCE RANGE upper 450 600
lower 50 50
MOTOR POWER kW (HP) 7.5 (10) 45 (60)
RINSE WATER SUPPLY bar 6 ± 1 6 ± 1
PROCESS WATER CONSUMPTION m³/hr NONE REQUIRED
MACHINE WEIGHT kg 1,136 2,450
WIDTH m 1.23 1.51
DIMENSIONS LENGTH m 1.23 2.00
HEIGHT m 1.73 2.11
*Denotes application specific parameter, consult manufacturer.
Note: Specifications are subject to change without notice. Equipment may not operate or achieve best performance under maximum capacities.
F A L C O N U L T R A - F I N E ( U F ) C O N C E N T R A T O R S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
Rinse WaterFeed
ConcentrateBuild Up
Rinsing ManifoldsZEDRing
RinseNozzles
VariableLip Ring
StratificationZone
Baffle
ConcentrateDischarge Ports
Impeller
RetentionZone
Feed Pipe
Feed Tailings
Tailings
Concentrate
RECOVERY DOWN TO 10 MICRONS AND UNIT CAPACITIES UP TO 100 t/h
Falcon C Concentrators are typically used in gravity
recovery applications that require a higher mass yield
to concentrate when compared with SB Concentrators.
Often utilized for the recovery of valuable fine particles,
Falcon C Concentrators are capable of collecting fines
missed by dense medium separators, spirals or any
other low G processes.
Designed for continuous duty, these machines
are able to produce mass yields as high as 40%.
The primary objective of the Falcon ‘C’s is to
maximize recovery and reduce tonnage to
downstream processes. The technology is ideal for
scavenging or pre-concentrating applications as well
since no water is added during processing.
Reliable test work can lead you to the right
concentrator for your application. Sepro operates
laboratory facilities, which generate decisive data
for scale up to commercial operation.
F A L C O N C O N T I N U O U S ( C ) C O N C E N T R A T O R S
4
A P P L I C A T I O N S
■ Primary concentration of tin, tantalum, tungsten, chrome,
cobalt, iron, fine oxidized coal and uranium
■ Scavenging of fine particles lost by low G force processes
and flotation
■ Pre-concentration of heavy minerals
K E Y A D V A N T A G E S
■ Unit capacities up to 100 t/h
■ The variable frequency drive (VFD) enables control over G force
based on application
■ Advanced wear materials and a modular design decreases
downtime and reduces maintenance costs.
■ High gravitational field (up to 300 G) allows recovery of
very fine particles
■ No fluidizing water consumption or offline time for
concentrate flushing
■ Produces high density (variable mass yield 0 – 40%) concentrate
therefore no thickeners required
■ Continuous production of concentrate at >70% solids
■ Greater than 95% mechanical availability, extremely low
operating costs
■ Small footprint
■ Fully automated, “one touch” operation that provides the least
amount of offline time and highest possible concentrate security
Feed
Feed Pipe
RetentionZone
StratificationZone
Impeller
Lights
Heavies
ThrottlingNozzles (30)
HighS.G.Bed
Compressed Air Supply(Introduced through Rotating Union)
S P E C I F I C A T I O N S
MODEL C400 C1000 C2000 C4000**
RECOMMENDED SOLIDS CAPACITY* t/h 1 - 5 5 - 27 20 - 60 45 - 100
MAX SLURRY CAPACITY m³/hr 17 74 210 400
MAXIMUM FEED PARTICLE SIZE* mm 1.0 1.0 1.0 1.0
MINIMUM EFFECTIVE CAPTURE SIZE µm 10 10 10 10
CONCENTRATE PERCENT SOLIDS % 65 - 72 65 - 72 65 - 72 65 - 72
MAXIMUM FEED PERCENT SOLIDS* % 40 - 45 40 - 45 40 - 45 40 - 45
CONCENTRATE SURFACE AREA m2 0.25 0.60 1.42 2.64
G-FORCE RANGE upper 300 300 300 300
lower 50 50 50 50
MOTOR POWER kW (HP) 7.5 (10) 15 (20) 30 (40) 75 (100)
PROCESS WATER CONSUMPTION m³/hr NONE REQUIRED
MACHINE WEIGHT kg 1215 2 525 4 615 10 150
WIDTH m 1.22 1.55 1.85 2.36
DIMENSIONS LENGTH m 1.22 1.55 1.85 2.36
HEIGHT m 1.33 2.18 2.67 2.63
*Denotes application specific parameter, consult manufacturer.
**Special applications only, consult manufacturer.
Note: Specifications are subject to change without notice. Equipment may not operate or achieve best performance under maximum capacities.
F A L C O N C O N T I N U O U S ( C ) C O N C E N T R A T O R S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
CompressedAir Supply(Introduced through Rotating Union)
LightsOutlet
HeaviesOutlet
Feed Rinse Water
HIGH CAPACITY EQUIPPED WITH INTERCHANGEABLE SCREEN DECKS
Sepro-Sizetec Screens are used for a variety of
particle size separation and dewatering duties in
mineral processing and aggregate applications.
In mineral processing applications, particle size
separation is of utmost importance in order to
optimize crushing, grinding and gravity separation
as well as many other processes. In aggregate
applications, proper size separation and dewatering
is essential to generate a saleable product. Sepro
works closely with clients to determine the correct
screen type and size for each application.
S E P R O - S I Z E T E C S C R E E N S
5
A P P L I C A T I O N S
■ Gold Ore Processing
■ Fine Aggregates
■ Industrial Minerals
■ Coal Processing
■ Soil Remediation
K E Y A D V A N T A G E S
■ High capacity capable
■ High frequency linear stroke G-force vibrating motion
■ Low profile screen box design for minimum head room
requirements
■ Trunnion suspension with heavy duty coil springs
■ Directly driven by reliable vibrator motors
■ Interchangeable screen decks with a variety of screen
media options
■ Easy deck angle changes
■ Possible horizontal or up-hill installation
■ Extra rugged screen construction for heavy load operation
S E P R O - S I Z E T E C S C R E E N S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
2' x 4'
2' x 6'
3' x 6'
3' x 8'
4' x 8'
4' x 10'
5' x 12'
4' x 12'
5' x 12'
6' x 12'
7' x 14'
8' x 16'
8' x 20'
2' x 6'
3' x 9'
4' x 12'
6' x 12'
2' x 7'
3' x 10'
4' x 10'
5' x 12'
6' x 12'
7' x 14'
8' x 14'
SEPRO – SIZETECDEWATERING FINE SCREEN
SEPRO – SIZETECHORIZONTAL DECK SCREEN
SEPRO – SIZETECINTENSIVE DEWATERING SCREEN – CURVE DECK
SEPRO – SIZETECINTENSIVE DEWATERING SCREEN – VEE DECK
■ For wet fine particle
size separation
ranging from
4 mesh to 400 mesh
(5 mm to 38 micron)
■ For trash screens
■ For resin screens
■ For CIL carbon screens
- Loaded carbon
screens
- Carbon sizing
screens
- Carbon dewatering
screens
- Carbon safety
screens
■ For wet or dry sizing
operation ranging
from 4 inch to
50 mesh (100 mm
to 0.3 mm)
■ For trash screen for
cyclone overflow in
mill grinding circuit
■ For high capacity
carbon safety screen
in CIL & CIP
operations
■ For sag mill
discharge screen
■ For rinse and drain
screen operation
■ For efficient sizing
and dewatering
operation with
screen opening size
ranging from 8 mesh
to 60 mesh (3 mm
to 250 micron)
■ For polishing and
dewatering of spiral
clean coal
■ For maximum
dewatering of fine
coal refuse
■ For water droplets
free dewatering of
fine materials ranging
from 4 mesh to
150 mesh (5 mm
to 100 micron)
■ For best dewatering
operation for
concrete sand
■ For dewatering of
silica sand, sinter
ore, fine coal, refuse
phosphate, potash,
boiler bottom ash, etc.
■ For 100 mesh to
400 mesh fine sand
recovery from sand
plant effluent
2' x 8'
3' x 8'
4' x 12'
5' x 8'
6' x 12'
7' x 16'
8' x 20'
SEPRO – SIZETECSTEP DECKSCREEN
■ Efficient wet sizing
before gravity
concentrator
ranging from
3/8 inch to 40 mesh
(10 mm to 0.4 mm)
■ Drain, rinse and
dewatering for soil
remediation
■ Loaded carbon
washing for CIP/CIL
S T A N D A R D S E P R O - S I Z E T E C S C R E E N S I Z E S
MODEL
SIZESAvailable in manystandard screen sizes
APPLICATIONS
LOW CAPITAL COST ANDSHORT DELIVERY TIMES
Sepro Tyre Drive Agglomeration Drums are specifically
designed to prepare feeds with high fines content on Gold
and Base Metal heap leaching operations. The action in
the Agglomeration Drum, combined with small additions
of cement or lime, binds the fines into an agglomerated
product. This product is then heaped and leached
without “pooling” and “channeling” caused by loss of
heap permeability. Complete with a variable frequency
drive (VFD) package, operators are able to fine tune the
operation of the Sepro Agglomerator based on the
application. No auxiliary drive is required to perform
maintenance. Sepro Agglomerator shells are manufactured
in one piece to high quality standards and are thermally
stress relieved to eliminate localized high stress areas.
The machine utilizes the Sepro Pneumatic Tyre Drive
System (PTD) which provides an alternative to standard
chain and gear drive systems. This system of rubber tyres
mounted on independent gear boxes provides excellent
serviceability and reliability, having been well proven in
numerous difficult applications. An instrumental feature
accompanying Sepro’s tyre driven equipment is the tyre
pressure monitoring system (TPMS) which comes
standard with each Sepro rotary control console.
S E P R O T Y R E D R I V E A G G L O M E R A T I O N D R U M S
6
A P P L I C A T I O N S
Gold
■ Mixing of lime for pH control
■ Cement for binder
■ Cyanide solution
Copper, Uranium or Nickel Laterite
■ Sulfuric acid
■ Organic polymers for binder
K E Y A D V A N T A G E S
■ Short delivery times
■ Low installation costs with no heavy foundation requirements
■ No critical components such as ring gears, chain drive, steel
wheels or trunnion bearings
■ Standard, off-the-shelf major components to minimize
any downtime
■ Commercial heavy truck tyres that can easily be sourced locally
■ Units are all pre-assembled and shop tested
■ Flexible rubber liners to prevent buildup
■ Shell supported design allows for quick and efficient maintenance
■ Drum angle on frame is adjustable to suit application
Sepro Pneumatic Tyre Drive System (PTD)3.0 x 8.5 Sepro Agglomeration DrumNote: Specifications are job/project dependent and/or application
specific. Please check with Sepro sales representative.
S T A N D A R D A G G L O M E R A T O R S I Z E S
DIA. X L UNITS INSTALLED (m) (kW) POWER (kW)
1.8 x 5.0 1 x 45 45
2.1 x 6.0 2 x 30 60
2.5 x 8 3 x 30 90
3.0 x 9.5 3 x 45 135
3.6 x 10 4 x 60 240
S E P R O T Y R E D R I V E A G G L O M E R A T I O N D R U M S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
REV 01 • 08/11/2015
Heavy Duty One (1) PieceShell Weldment. ThermallyStress Relieved.
Discharge Chute
Discharge Chute Liner Custom EngineeredRim and Hub Assembly
Heavy StructuralPivotable Base Frame
Heavy DutyCommercialPneumatic Tyres
ConventionalHigh EfficiencyElectric Motor
Commercial Bevel /Helical Gear Box
Solution AdditionThrustRing
Heavy DutyRubber Liner
THREE PRODUCTS FROM ONE DMS SEPARATOR
The dynamic, multi-stage Condor Dense Medium
Separator gives Sepro a leading position in advanced Dense Medium Separation (DMS) technology. A minimum of two separation stages are inherent in a Sepro Condor DM Separator, resulting in high separation efficiency in rougher/scavenger or rougher/cleaner DMS applications. DMS is typically used in a pre-concentration duty prior to processing or milling to reject barren material and reduce downstream CAPEX and OPEX costs.
Sepro supplies customizable and transportable DMS Plants for a wide variety of application requirements. Sepro’s standard two product (concentrate, tailings) DMS Plant utilizes a two stage Condor Separator and single density medium circuit, while the three product (concentrate, middlings, tailings) DMS Plant utilizes a three stage Condor Separator and two medium circuits at high and low density.
The Condor Separator is simple and easy to feed, usually by a conveyor belt or from a vibrating screen. Abrasive or friable ore is not pumped resulting in reduced power requirements, equipment (pump, DM separator, piping) maintenance costs and reduced ore breakage and fines generation. The compact Condor DM Separator makes it possible to convert a conventional two product DMS cyclone installation into a three product operation.
S E P R O C O N D O R
D E N S E M E D I U M S E P A R A T O R S
7
A P P L I C A T I O N S
For Pre-Concentration and Concentration of:
Metals, oxides and sulphides
■ Antimony
■ Bauxite
■ Chromite
■ Copper
■ Gold
■ Iron
■ Lead
■ Manganese
■ Nickel
■ Tin
■ Zinc
K E Y A D V A N T A G E S
High separation efficiency
Large feed top size capacity
High throughput capacity
Direct feed
■ By conveyor belt, vibrating screen or feeder
■ No pumping of feed solids, only medium is pumped
Multi-stage separation
■ Rougher/scavenger, rougher/cleaner DMS duties
■ High sinks capacity
■ Sink products may be combined or separated
Sepro pre-engineered DMS Plants
■ Fast delivery
■ Custom and transportable
■ Rapid start of production
■ Commissioning and training
Industrial minerals and silicates
■ Barytes
■ Coal
■ Diamond
■ Feldspar
■ Fluorspar
■ Limestone
■ Phosphate
■ Potash
■ Quartz
■ Petalite
■ Spodumene
Sink Header BoxesFEED
Feed FlushMaterial
Sink 1 Concentrate Product
Sink 2 Middling ProductSinkProduct
Middlings
‘L’
Float Product
FLOAT
Feed 2 Medium
Feed 1 Medium15° - 25°
S T A N D A R D C O N D O R D M S S I Z E S
SEPARATOR SIZE FEED CAPACITY* MAX FEED PARTICLE SIZE OVERALL LENGTH** WEIGHTmm tph mm mm (approx.) Kg (approx.)
CS250 10 – 30 20 – 25 2450 650
CS300 30 – 50 30 – 38 2850 1250
CS400 50 – 80 40 – 50 3250 1850
CS500 80 – 120 60 – 75 3300 2550
CS600 120 – 170 70 – 88 3940 3775
CS700 170 – 230 80 – 100 4580 5000
S E P R O C O N D O R
D E N S E M E D I U M S E P A R A T O R S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
*Separator duty and capacity to be confirmed by Sepro.
**For two-stage Condor only. Length will vary with three-stage arrangement.
GAIN HIGHER RECOVERY WITH NO LOSS OF FINES
The Sepro Leach Reactor is a high yield processing
solution designed to drastically improve mineral
recovery from gravity concentrate. Combining long-term
production value with low operating costs, the SLR is
installed after concentration in a circuit to maximize
gravity treated ore. Extensive test work of the SLR on
site has shown over 99% of the target mineral is
recovered through a simple, fully automated process
that is easily incorporated into recovery operations.
Sepro designs and supplies complete, customizable
recovery circuits incorporating leaching, gravity
concentration, and electrowinning based on project
requirements. Laboratory units are also available for
SLR testing which generate reliable data for scale up
to commercial operation. Pilot scale machines are
also supplied for field test purposes.
Pilot scale leach reactors are available for pilot
plant and laboratory use.
S E P R O L E A C H R E A C T O R S
8
A P P L I C A T I O N S
■ Recovery of gold from concentrates
C A P A C I T I E S
■ SLR units sized to project specifications
■ Laboratory units available
K E Y A D V A N T A G E S
Streamlined simple design
■ Minimal moving parts
■ Agitated tank leach
Valuable metallurgical benefits
■ Clear pregnant solution
■ Ideal feed for electrowinning
■ No loss of fines
■ Leached ore can be returned to circuit
■ Barren solution can be reused
■ Fast leach kinetics
Completely automated process
■ Minimal oversight risk
■ Continual monitoring for optimal performance
Hassle free maintenance
■ Online instrumentation cleaning and replacement
■ Simple pumps used periodically
■ Rubber lined mixer and leach tank limits wear
Optimized safety features
■ pH monitor to minimize risk of HCN formation
■ HCN monitor for failsafe
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
01/20/2015
P R O C E S S F L O W D I A G R A M
Concentrate
H2O
H2O
Tails
PeristalticPump
PregnantLeachSolution
O2
Recycle
Reagents
– NaOH
– NaCN
– FLOCC
– Na2S
20
5
– H20
2
– Leachaid
S P E C I F I C A T I O N S
MODEL SLR10 SLR250 SLR1000 SLR2000
RECOMMENDED CAPACITY @ 3.0 S.G. kg 10 250 1,000 2,000
CONCENTRATE CONE VOLUME m3 N/A 0.2 0.8 1.5
LEACH TANK VOLUME m3 0.02 0.5 1.8 3.7
AIR SUPPLY kPa N/A N/A 600 600
MIXER POWER kW 0.75 3.7 5.6 7.5
CN LEVELS ppm 20,000 20,000 20,000 20,000
DISSOLVED OXYGEN LEVELS ppm 10-30 10-30 10-30 10-30
DIMENSIONS: LENGTH M 2.8 3.9 4.9 5.5
WIDTH M 1.3 1.8 2.3 2.7
HEIGHT m 2.6 3.1 3.6 4.0
MODEL SLR3000 SLR6000 SLR10000 SLR16000
RECOMMENDED CAPACITY @ 3.0 S.G. kg 3,000 6,000 10,000 16,000
CONCENTRATE CONE VOLUME m3 2.3 4.6 7.6 12.2
LEACH TANK VOLUME m3 5.5 11.0 18.3 30.0
AIR SUPPLY kPa 600 600 600 600
MIXER POWER kW 11.2 11.2 14.9 18.6
CN LEVELS ppm 20,000 20,000 20,000 20,000
DISSOLVED OXYGEN LEVELS ppm 10-30 10-30 10-30 10-30
DIMENSIONS: LENGTH M 6.0 7.0 7.9 8.9
WIDTH M 2.9 3.4 3.9 4.3
HEIGHT m 4.2 4.7 5.2 5.6
100
90
80
70
60
50
40
30
20
10
0
20 g/L, 40% Pulp, 20-30 ppm Oxygen (SLR)
20 g/L, 30% Pulp, 15-20 ppm Oxygen (Bottle Roll)
Time (Hrs)
Rec
over
y (%
)
0 1 2 3 4 5 6 7
C Y A N I D E L E A C H K I N E T I C S
P R O C E S S F L O W D I A G R A M
Concentrate
H2O
H2O
Tails
PeristalticPump
PregnantLeachSolution
O2
Recycle
Reagents
– NaOH
– NaCN
– FLOCC
– Na2S
20
5
– H20
2
– Leachaid
S P E C I F I C A T I O N S
MODEL SLR10 SLR250 SLR1000 SLR2000
RECOMMENDED CAPACITY @ 3.0 S.G. kg 10 250 1,000 2,000
CONCENTRATE CONE VOLUME m3 N/A 0.2 0.8 1.5
LEACH TANK VOLUME m3 0.02 0.5 1.8 3.7
AIR SUPPLY kPa N/A N/A 600 600
MIXER POWER kW 0.75 3.7 5.6 7.5
CN LEVELS ppm 20,000 20,000 20,000 20,000
DISSOLVED OXYGEN LEVELS ppm 10-30 10-30 10-30 10-30
DIMENSIONS: LENGTH M 2.8 3.9 4.9 5.5
WIDTH M 1.3 1.8 2.3 2.7
HEIGHT m 2.6 3.1 3.6 4.0
MODEL SLR3000 SLR6000 SLR10000 SLR16000
RECOMMENDED CAPACITY @ 3.0 S.G. kg 3,000 6,000 10,000 16,000
CONCENTRATE CONE VOLUME m3 2.3 4.6 7.6 12.2
LEACH TANK VOLUME m3 5.5 11.0 18.3 30.0
AIR SUPPLY kPa 600 600 600 600
MIXER POWER kW 11.2 11.2 14.9 18.6
CN LEVELS ppm 20,000 20,000 20,000 20,000
DISSOLVED OXYGEN LEVELS ppm 10-30 10-30 10-30 10-30
DIMENSIONS: LENGTH M 6.0 7.0 7.9 8.9
WIDTH M 2.9 3.4 3.9 4.3
HEIGHT m 4.2 4.7 5.2 5.6
100
90
80
70
60
50
40
30
20
10
0
20 g/L, 40% Pulp, 20-30 ppm Oxygen (SLR)
20 g/L, 30% Pulp, 15-20 ppm Oxygen (Bottle Roll)
Time (Hrs)
Rec
over
y (%
)
0 1 2 3 4 5 6 7
C Y A N I D E L E A C H K I N E T I C S
GAIN HIGHER RECOVERY WITH NO LOSS OF FINES
The Sepro Leach Reactor is a high yield processing
solution designed to drastically improve mineral
recovery from gravity concentrate. Combining long-term
production value with low operating costs, the SLR is
installed after concentration in a circuit to maximize
gravity treated ore. Extensive test work of the SLR on
site has shown over 99% of the target mineral is
recovered through a simple, fully automated process
that is easily incorporated into recovery operations.
Sepro designs and supplies complete, customizable
recovery circuits incorporating leaching, gravity
concentration, and electrowinning based on project
requirements. Laboratory units are also available for
SLR testing which generate reliable data for scale up
to commercial operation. Pilot scale machines are
also supplied for field test purposes.
Pilot scale leach reactors are available for pilot
plant and laboratory use.
S E P R O L E A C H R E A C T O R S
8
A P P L I C A T I O N S
■ Recovery of gold from concentrates
C A P A C I T I E S
■ SLR units sized to project specifications
■ Laboratory units available
K E Y A D V A N T A G E S
Streamlined simple design
■ Minimal moving parts
■ Agitated tank leach
Valuable metallurgical benefits
■ Clear pregnant solution
■ Ideal feed for electrowinning
■ No loss of fines
■ Leached ore can be returned to circuit
■ Barren solution can be reused
■ Fast leach kinetics
Completely automated process
■ Minimal oversight risk
■ Continual monitoring for optimal performance
Hassle free maintenance
■ Online instrumentation cleaning and replacement
■ Simple pumps used periodically
■ Rubber lined mixer and leach tank limits wear
Optimized safety features
■ pH monitor to minimize risk of HCN formation
■ HCN monitor for failsafe
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
01/20/2015
S E P R O M O B I L E M I L L P L A N T
P L A N T F E A T U R E S
■ Sepro 1.8 x 3.6m (150kW) or 2.1 x 4.0m
(220kW) Overflow Ball Mill
■ Sepro SB750 Falcon Concentrator
with AutoPAC (optional)
■ Sepro-Sizetec 2' x 8' single deck
vibrating screen
■ Three Sepro VT-80 Vertical Pumps
■ Nema rated exterior operating console
■ Hydraulic chassis leveling
■ Service access platforms
■ Hydrocyclone to suit application
■ On plant wiring and piping
■ Additional leaching and flotation
modules available
A P P L I C A T I O N S
■ Small tonnage grinding projects
■ Pilot plant or bulk sample plants
■ Short mine life projects
■ Combined grinding/gravity recovery operations
■ Conventional grinding/flotation operations
K E Y A D V A N T A G E S
■ Choice of two grinding mill sizes
■ Compact and easily transportable
■ Advantage of proven Sepro equipment
■ Short delivery times
■ Units arrive pre-assembled and tested
■ Minimal set-up requirements
■ Economical
■ Minimal civil work required
To Flotationor Leach
New Mill Feed
Tyre Drive Ball MillScats
VerticalTankPump
To Gold Room
Vibrating Sizetec Screen
FalconConcentrator
S E P R O M O B I L E M I L L P L A N T
16688mm
15450mm
36
60
mm
650
0m
m
46
8m
m
W E I G H T S A N D D I M E N S I O N S
P R O C E S S F L O W D I A G R A M
TOTAL PLANT WEIGHT WITH DRIVE TRACTOR* (kg)
Front Steering Axle 6020
Dual Drive Axle 19240
Rear Triple Axle 17790
*May vary depending on drive tractor type.
P O W E R A N D W A T E R U S A G E
BALL MILL INSTALLED PROCESS FRESH DIA. X L POWER* WATER WATER (m) (kW) (cu meters /h) (cu meters /h)
1.8 x 3.6 190 15 12
2.1 x 4 260 30 12
*Plant total.
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
Plants and operations are designed to minimize construction
time, minimize expenses, and to be easily serviceable in
remote locations. Commissioning time on site is decreased
by thorough shop testing of the major components and
sub-assemblies.
All of Sepro’s plants are designed to international processing
and safety standards and can easily be containerized, shipped
and reassembled, even in the most remote locations in
the world!
Process testing is critical to the success of any plant, and
our partnership with a full service metallurgical laboratory
provides Sepro the opportunity to fine tune the process
to suit the ore type.
MODULAR PROCESS SOLUTIONS
Utilizing our experienced team of engineering professionals,
Sepro designs and builds modular and mobile processing
plants for a wide range of minerals. We create solutions
using an array of processing techniques that encompasses
numerous unit process operations. Complete plants are
assembled utilizing Sepro manufactured equipment, but are
optionally designed to accommodate innovative solutions
and equipment from a wide variety of vendors and
sub-contractors.
Sepro’s engineering team creates versatile and expertly
designed process solutions to match even the most difficult
specification. All modular plants may include primary and
secondary crushing, screening, agglomeration, washing and
scrubbing, dense medium separation, grinding, gravity
concentration, floatation and leaching.
M O D U L A R P R O C E S S S O L U T I O N S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com
M O D U L A R P R O C E S S S O L U T I O N S
P R O C E S S A P P L I C A T I O N S
Sepro is able to provide customized solutions based around its wide
range of equipment. Examples include, but are not limited to:
■ Precious metal recovery
■ Crushing and screening systems
■ Heap leach agglomeration and conveying systems
■ Gravity recovery systems for tin/tungsten/tantalum
■ Construction aggregate washing and classification
■ Nickel laterite slurry prep plants
K E Y A D V A N T A G E S
■ Designed to suit your process requirements
■ High quality modular construction
■ Proven reliability of Sepro equipment used
■ Modularized single source supply reduces costs
■ Easy to ship globally
■ Easy to reassemble and commission
■ Designed to have minimal civil work requirements
SEPRO MOBILE PLANTS
Designed to allow the rapid deployment of a complete plant,
Sepro Mobile Mill systems are ideal for smaller tonnage
operations and / or mining operations with short mine life.
Easily re-locatable, the main process equipment is mounted
on road transportable custom built trailer assemblies. These
plants require minimal site civil works. Mobile plants can be
designed to encompass a wide variety of process options
from crushing through to the final concentrate collection.
SEPRO MODULAR OR SKID MOUNTED
Custom modular plants are engineered around structural
elements that are simple and easy to erect on site and
minimize civil and infrastructure costs. These plants can
be designed with larger equipment for higher tonnage
applications than that of the Sepro Mobile Plants.
SEPRO STANDARD MODULAR PLANT DESIGNS
Sepro offers several package options as standard plants.
These plants are normally designed around a single recovery
or process option such as dense medium separation or
gravity concentration. Sepro maintains critical components
in stock for quick delivery.
M O D U L A R P R O C E S S S O L U T I O N S
P R O C E S S A P P L I C A T I O N S
Sepro is able to provide customized solutions based around its wide
range of equipment. Examples include, but are not limited to:
■ Precious metal recovery
■ Crushing and screening systems
■ Heap leach agglomeration and conveying systems
■ Gravity recovery systems for tin/tungsten/tantalum
■ Construction aggregate washing and classification
■ Nickel laterite slurry prep plants
K E Y A D V A N T A G E S
■ Designed to suit your process requirements
■ High quality modular construction
■ Proven reliability of Sepro equipment used
■ Modularized single source supply reduces costs
■ Easy to ship globally
■ Easy to reassemble and commission
■ Designed to have minimal civil work requirements
SEPRO MOBILE PLANTS
Designed to allow the rapid deployment of a complete plant,
Sepro Mobile Mill systems are ideal for smaller tonnage
operations and / or mining operations with short mine life.
Easily re-locatable, the main process equipment is mounted
on road transportable custom built trailer assemblies. These
plants require minimal site civil works. Mobile plants can be
designed to encompass a wide variety of process options
from crushing through to the final concentrate collection.
SEPRO MODULAR OR SKID MOUNTED
Custom modular plants are engineered around structural
elements that are simple and easy to erect on site and
minimize civil and infrastructure costs. These plants can
be designed with larger equipment for higher tonnage
applications than that of the Sepro Mobile Plants.
SEPRO STANDARD MODULAR PLANT DESIGNS
Sepro offers several package options as standard plants.
These plants are normally designed around a single recovery
or process option such as dense medium separation or
gravity concentration. Sepro maintains critical components
in stock for quick delivery.
Plants and operations are designed to minimize construction
time, minimize expenses, and to be easily serviceable in
remote locations. Commissioning time on site is decreased
by thorough shop testing of the major components and
sub-assemblies.
All of Sepro’s plants are designed to international processing
and safety standards and can easily be containerized, shipped
and reassembled, even in the most remote locations in
the world!
Process testing is critical to the success of any plant, and
our partnership with a full service metallurgical laboratory
provides Sepro the opportunity to fine tune the process
to suit the ore type.
MODULAR PROCESS SOLUTIONS
Utilizing our experienced team of engineering professionals,
Sepro designs and builds modular and mobile processing
plants for a wide range of minerals. We create solutions
using an array of processing techniques that encompasses
numerous unit process operations. Complete plants are
assembled utilizing Sepro manufactured equipment, but are
optionally designed to accommodate innovative solutions
and equipment from a wide variety of vendors and
sub-contractors.
Sepro’s engineering team creates versatile and expertly
designed process solutions to match even the most difficult
specification. All modular plants may include primary and
secondary crushing, screening, agglomeration, washing and
scrubbing, dense medium separation, grinding, gravity
concentration, floatation and leaching.
M O D U L A R P R O C E S S S O L U T I O N S
Sepro Mineral Systems Corp.9850 201 Street, Langley, British Columbia, Canada V1M 4A3Office: +[1] 604.888.5568 • Fax: +[1] 604.888.5521 • Toll free: +[1] 800.990.5568 North [email protected] • www.seprosystems.com