POWER CLEANER Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Power Cleaner is a highly concentrated, commercial strength cleaner, degreaser, and wax remover for commercial and industrial use. Power Cleaner has been formulated with a distinct blend of water softening agents and nonionic surfactants that allow you to clean and dissolve the toughest grease /oil stains from almost any surface, including concrete. Power Cleaner works by penetrating, suspending, emulsifying, and dissolving surface contaminants. This remarkable product is so versatile it can be used to clean everything from degreasing the dirtiest substrate to removing oil stains and/or wax from commercial and industrial surfaces. Substrates Concrete Surfaces Ceramic Tile and grout Natural and cultured stone Commercial P ool Decks Wal kways Driv eways

Features / Benefits Proficient industrial wax remover Effectively degreases commercial kitchens Removes tar, tire marks, and gum from most surfaces 100% Biodegradable Can be safely used in confined areas

Specifications Drying Time 2 Hours Cure Time 72 Hours Thinning (1:4) Heavy Duty, (1:9) pH Balancing (1:20) All

Purpose Cleaner. (Power Cleaner: Water) Color Pink Chemical Type Degreaser Clean Up Water Shelf Life 1 Year Useful life 3 Years Packaging Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) (1:4) Heavy Duty 400 – 550 (1:9) pH Balancing 500 – 650 (1:20) All Purpose Cleaner 1000 – 1250 Test Results* (Removal of Substances) Used Automobile Oil Excellent Transmission Fluid Good Brake Fluid Excellent Water Excellent Wax Excellent Corrosive Chemicals Good

NU-LIFT CLEANER Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Nu-Lift Cleaner is a formulated with an environmentally-responsible mineral acid that is user friendly. Nu-Lift Cleaner does exactly what its name implies it lifts out and removes dirt, alkalinity, efflorescence, hard water deposits, magnesium, and stains from surfaces like grout, natural stone, and concrete without harming or discoloring the surface. Substrates Concrete Surfaces Masonry Surfaces Natural and cultured stone Grout Commercial:

Pool Decks Walkways Driveways

Features / Benefits Removes Organic Deposits Balances low pH Safely dissolves

Efflorescence Magnesium Lime deposits Soap scum

100% Biodegradable Can be safely used in confined areas

Specifications Drying Time 2 Hours Cure Time 72 Hours Thinning (1:1) For Standard Usage (Nu Lift Cleaner: Water) Color Blue Chemical Type Mineral Acid Clean Up Water Shelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) (1:1) For Standard Usage 400 – 500 Test Results* (Removal of Substances) Used Automobile Oil Fair Transmission Fluid Fair Brake Fluid Good Stains Excellent Lime Deposits Excellent Efflorescence Excellent Corrosive Chemicals Fair

STONE SOAP Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Stone Soap is a highly concentrated, heavy duty cleaner formulated for cleaning without harming finished surfaces. Stone Soap is a 100% biodegradable product which does not need to be rinsed off. Stone Soap is a user friendly, environmentally-responsible product that is excellent for cleaning any surface. Substrates X-Bond System Pre Stain System Existing Concrete or Sealers Ceramic Tile & Grout Natural Stone

Features / Benefits User Friendly Equally effective in hard or soft water Neutral pH Cleaner 100% Biodegradable Can be safely used in confined areas

Specifications Thinning (1:10) Heavy Duty (1:20) For Standard Usage

(Stone Soap : Water) Color Green Chemical Type Industrial Cleaner Clean Up Water Shelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) (1:10) Heavy Duty 900 – 1000 (1:20) For Standard Usage 1500 – 2000 Test Results* (Removal of Substances on a SEMCO Finished Surface) Used Automobile Oil Good Transmission Fluid Good Brake Fluid Good Stains Excellent Lime Deposits Excellent Efflorescence Excellent Corrosive Chemicals Fair

X-BOND SYSTEM Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description SEMCO's innovative X-Bond is a waterproof, lightweight, cementatious product that virtually resurfaces any surface. The X-Bond system offers the ultimate in durable, environmentally responsible creative design capability. This superior bonding system adheres directly to any existing surface. X-Bond can be safely applied in confined areas over existing surfaces minimizing waste disposal. Unlimited texture possibilities allow for complete creative freedom. This durable, waterproof system is designed for both interior, exterior and below grade use. Substrates Concrete Surfaces Coated Surfaces Ceramic Tile Wood Surfaces / Decks Vinyl / VCT Surfaces Natural Stone Metal Glass

Features / Benefits Waterproof cemetatious system Minimizes Waste Disposal Interior, Exterior, and Below Grade Durable for Floors, Walls, and Countertops Can be safely used in confined areas UV Resistant Resistant to Freeze-Thaw Damage *Available in Integral Colors

Specifications Drying Time 2 - 8 Hours - dependant upon thickness appliedCure Time 24 Hours Color White Powder & White Liquid / or Colored LiquidChemical Type Modified Acrylic / Modified Polymer Cement Clean Up Mineral Sprits, Xylene, or Toulene Shelf Life 1 Year Packaging Liquid = 1 Gallon or 5 Gallon Pail / Stone = 50 lb bag Coverage (sq. ft. 2 per gallons & a 50lb. bag, coverage is based on 1/8 inch application) Existing Concrete 60 – 80 Drywall, Cement Board 80 – 100 Ceramic Tile 30 – 40 Vinyl Tile or FRP 75 – 100 Natural Stone 50 – 60 Metal 80 – 100 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Brake Fluid Good Water Excellent Alkali Resistance Excellent Hydrochloric Acid (10%) Good Corrosive Chemicals Good

PRE STAIN Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description SEMCO's unique Pre-Stain Color is a water-based chemical bonding compound that provides rich, lasting color on exterior, interior and below grade concrete & X-BOND surfaces. This Environmentally-Responsible system creates lasting surface colors. Unique color reactions provide unlimited, vivid, one-of-a-kind visual designs. Artistry and practicality combine to create beautiful and functional applications. Substrates X-Bond System Unsealed concrete surfaces Exposed concrete Warehouse Floors Vertical, Horizontal, and Below Grade Surfaces Countertops

Features / Benefits Provides a one-of-a-kind Natural Effect UV Resistant Leaves a natural look Odorless Meets & Exceeds indoor air quality specifications, VOC Compliant Resistant to Freeze-Thaw Damage

Specifications Drying Time 1 - 4 Hours Cure Time 8 Hours Color Dependent upon Selected Color Chemical Type Water Base Stain Clean Up Water Shelf Life 1 Year Useful life 3 Years Packaging Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Existing or Cured Concrete 250 – 300 X-Bond System 250 – 300 Countertop 200 – 250 Stamped Concrete 200 – 250 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good

X-CRETE 400 SealerTechnical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description X-Crete 400 is formulated with the latest technology in polyurethane blend resin to provide the most environmentally-responsible, water-based sealer available in today’s market. X-Crete 400 is a high quality, multi-faceted product. It dries clear, creating a gloss look as it simultaneously seals, dust proofs, and protects. X-Crete 400 is a unique, one-of-a-kind gloss finish topcoat, which provides a durable barrier resistant to stains and chemicals while providing a polished look for exterior and interior use. It's low V.O.C.'s properties meet CA state laws. Substrates X-Bond System Pre Stain System Concrete Surfaces Countertops Stamped Concrete Pool Decks

Features / Benefits Withstands Commercial foot and vehicle traffic Enhances Color Resistant to chemicals Self-Priming, Sealer & Hardener *Also Available in Matte Finish *Also Available with a Non-Skid Additive

Specifications Drying Time 4 - 8 Hours (higher temperatures increase dry times)Cure Time 72 Hours Color White / Milky Liquid / Dries clearChemical Type Water Base Resins Clean Up Water if uncured / solvent if curedShelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Existing Concrete 250 – 300 X-Bond System 250 – 300 Pre Stain System 250 – 300 Countertop 200 – 250 Stamped Concrete 20 0 – 250 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good *Review SEMCO Top Coat Application Procedure prior to use

CRYSTAL COAT Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Crystal Coat is formulated with the latest water-based technology in latex polymers, and is able to link to most top coats. Crystal Coat provides a quick drying, environmentally-responsible, durability and shine, for interior and exterior use. Crystal Coat is a quality, multi-faceted product which dries clear creating a deep gloss finish, as it simultaneously seals and protects. Crystal Coat provides a durable barrier, resistant to stains and high foot traffic. Substrates Can Be Applied Over:

X-Bond System Pre Stain System *SEMCO Sealers Most Sealed Surfaces Stamped Concrete Existing Crystal Coat

Features / Benefits *Resistant to chemicals Withstands heavy foot traffic Interior and Exterior Use Easy to Maintain *Also Available in Matte Finish *Also Available with a Non-Skid Additive

SpecificationsDrying Time 30 Minutes - 1 Hour Cure Time 72 Hours Color White / Milky Liquid - dries clearChemical Type Water Base Arcylic Clean Up Water or (4:1) Power Cleaner for removalShelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Sealed Concrete 750 – 1000 X-Bond System 750 – 1000 Existing Crystal Coat (recoat) 1000 – 1200 Stamped Concrete 500 – 600 Test Results*Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good

X-CRETE 500 Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description X-Crete 500 is an exceptional waterproofing sealer that excels under the most demanding circumstances. X-Crete 500’s low molecular weight allows for excellent penetration. X-Crete 500 fills into the pores of the substrate, in which chemical reaction follows, that creates a solid, but breathable membrane. X-Crete 500 provides long lasting protection for a vast array of surfaces in which it leaves a natural finish. Substrates Existing Concrete X-Bond System Pre Stain System Ceramic Tile Stucco Slump Block Block Wall / Split face CMUTilt Up Wall Pourus Natural Stone

Features / Benefits Excellent Penetration Can be applied on damp surfaces Highly alkaline resistance Effective against freeze-thaw damage Unaffected by ultra-violet rays Increases life of mortar, tiles, stucco, brick & natural stone Anti Graffiti

Specifications Drying Time 2 Hours Cure Time 72 Hours Thinning Not Recommended Color Clear Chemical Type Silane & Siloxanne Clean Up Mineral Sprits Shelf Life 1 Year Useful life 3 Years Packaging 1 Gal. Pail, 5 Gal. Pail, 55 Gal. Drum Coverage (sq. ft. per gallon) Concrete 200 – 250 X-Bond 200 – 250 Tilt-up wall 150 – 200 Plaster 200 – 200 Cinder Block / CMU 150 – 175 Stucco 200 – 250 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good Corrosive Chemicals Good

XCEL Technical Product Information

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Xcel is an exceptional waterproofing sealer designed for specifically for natural stone. Xcel’s low molecular weight allows for excellent penetration. Xcel fills into the pores of the substrate, in which the chemical reaction that follows creates a solid, but breathable membrane. Xcel provides long lasting protection for a vast array of surfaces over which it leaves a natural finish. Substrates Existing Concrete X-Bond System Pre Stain System Non Glazed Ceramic Tile Stucco Slate, Flagstone, ect. Block Walls / CMU Porous Natural Stone

Features / Benefits Excellent Penetration Can be applied on damp surfaces Highly alkaline resistant Effective against freeze-thaw damage Unaffected by ultra-violet rays Increase life of mortar, tiles, stucco, brick & natural stone

Specifications Drying Time 2 Hours Cure Time 72 Hours Thinning Not Recommended Color Clear Chemical Type Industrial Silane & Siloxanne Clean Up Mineral Sprits Shelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Travertine 75 – 100 Granite 150 – 200 Limestone 150 – 200 Slate 150 – 200 Test Results*Used Automobile Oil Excellent Transmission Fluid Good Brake Fluid Fair Water Excellent Alkali Resistance Excellent Hydrochloric Acid (10%) Good Lacquer Thinner Poor Corrosive Chemicals Good *Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

XTRA GLOSS

Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Xtra Gloss is a one-part solvent-based polyurethane sealer, able to provide exceptional durability and shine for interior, exterior, and below grade use. Xtra Gloss is a high quality, multi-faceted product: which dries clear, creating a wet look, as it simultaneously seals, dustproofs, and protects for long lasting durability. Xtra Gloss is a unique, high-gloss top coat which provides superior and durable resistance to stains, many chemicals and vehicle traffic. Substrates Pre Stain System X-Bond System New & Existing Concrete Commercial Driveways Vertical Surfaces Warehouse Floors New & Existing Stamped Concrete

Features / Benefits Withstands commercial foot & vehicle traffic For Interior, Exterior, and Below Grade applications *Resistant to chemicals Rejuvenates Color Deep Gloss Finish *Also Available with a Non-Skid Additive

Specifications Drying Time 30 Minutes - 2 Hours (cooler temps may exceed this)Cure Time 48 Hours Thinning Not Recommended (consult a SEMCO rep.) Color Clear Chemical Type Solvent Base Resins Clean Up Xylene Shelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Concrete 250 – 300 X-Bond 250 – 300 Cinder Block or Natural Stone 175 – 225 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good Corrosive Chemicals Good

COLOUR COAT

Technical Product Information

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description Colour Coat is an Environmentally-Responsible product, formulated with the latest water-based technologies. Colour Coat a polyurethane product, which is designed to withstand heavy foot traffic, while maintaining a gloss or matte finish. With its temperature reducing properties, up to 25 degrees Fahrenheit, it is optimal for pool decks and other barefoot surfaces. Colour Coat is a sealer, primer and hardener all-in-one. Substrates X-Bond System Concrete Surfaces Coated or Sealed Surfaces Pool Decks Garage Floors

Features / Benefits For Interior & Exterior Use Sealer, Primer, and Hardener all-in-one Withstands heavy foot traffic Reduces Surface Temperature Resistant to many chemicals High alkaline & salt resistance *Also Available in Matte Finish

SpecificationsDrying Time 8 Hours Cure Time 72 Hours Color White / Milky Liquid / Available in over 1,000 colorsChemical Type Water Base Polyurethane Clean Up Water or Xylene if curedShelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Sealed Concrete 300 – 450 X-Bond System 300 – 400 Countertops 300 – 450 Stamped Concrete 250 – 350 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good

X-CRETE 800 Concrete Curing Compound

*Tests are based on Semco Systems experience unless otherwise noted. 1-800-33-SEMCO

PRECAUTIONS Always test a small area first to determine ease of application and desired results. Gloves and eye protection should be worn during application. Do not mix with other cleaners. Not for use on humans or animals. If any contact with skin or eyes occurs, wash immediately with plenty of water. Be sure to read container label and Material Safety Data Sheet before using this product.

LIMITED WARRANTY NOTICE SEMCO Inc. Warrants that its products will meet their specifications. There are no other warranties, expressed or implied of merchantability or fitness of use. The only obligation of the seller-manufacturer shall be to replace material found to be defective. SEMCO Inc., will not be liable for labor or consequential damage of any kind. The information contained herein is, to the best of our knowledge and belief, true and accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. All chemicals may present unknown health hazards and should be used with caution.

Product Description SEMCO's unique X-Crete 800 Cure is a water-based chemical bonding compound that provides the most environmentally-responsible system for curing and hardening new concrete surfaces. Meets or exceeds ASTM specification C-308, C-309, and AASHTO 148 Type I. On fresh concrete it restricts the hydration of water assuring that it reaches maximum hardness. Substrates X-Bond System Unsealed concrete surfaces Exposed concrete Warehouse Floors Vertical, Horizontal, and Below Grade Surfaces Countertops

Features / Benefits Provides a one-of-a-kind Natural Effect UV Resistant Leaves a natural look Odorless Meets & Exceeds indoor air quality specifications, VOC Compliant Resistant to Freeze-Thaw Damage

Specifications Drying Time 2 Hours Cure Time 8 Hours Color Milky white , dries clearChemical Type Water Base Stain Clean Up Stripping Agent or SEMCO Power Cleaner Shelf Life 1 Year Useful life 3 Years Packaging 1 Quart, 1 Gallon, 5 Gallon Pail, 55 Gallon Drum Coverage (sq. ft. per gallon) Existing Concrete 250 – 300X-Bond System 250 – 300 Countertop 200 – 250 Stamped Concrete 225 – 275 Test Results* Used Automobile Oil Excellent Transmission Fluid Good Water Excellent Alkali Resistance Good Hydrochloric Acid (10%) Good