self-enclosed shark meter assemblies brochure v.1.07_e173702.pdf
TRANSCRIPT
• For Retrofit Meter Solutions
• Extends Switchgear Capability
• Pre-Wired and Configured
• Eliminates Wiring and Installation Errors
ww
w.e
lect
roin
d.c
om
Electro Industries/GaugeTechThe Leader in Power Monitoring and Smart Grid Solutions
For Multi-function Shark® 50, 50B, 100, 100B, or 200 Meters
NEMA 4XOutdoor-Rated
NEMA 1Indoor-Rated
2
Description
EIG's Shark® meter in enclosure lets you expand your switchgear capability without expensive and time-consuming redesign. Simply mount and wire the enclosure next to your switchgear and you are ready to go, with no downtime at all!
This is a perfect solution for a retrofit when there is no metering compartment available. The meter comes standard with a NEMA 1 indoor enclosure or a NEMA 4X outdoor enclosure, and is factory wired with the meter installed. Standard equipment includes voltage fuses, a shorting block for current transformers, and a control power transformer if used with 277/480 Volt power systems.
The enclosure can be ordered with either the Shark® 50 multi-function meter, the Shark® 50B meter with native BACnet MS/TP, the Shark® 100 multi-function meter, the Shark® 100B meter with native BACnet/IP, or the
WIRING DIAGRAMS
SHARK® ASSEMBLY INFORMATION
Door GasketKey Lock Fused VoltageInputs
Control PowerTransformer for277 Voltage Configuration
Current InputShorting Block
Wye Wiring for 120V Model
Wye Wiring for 277V Model
Shark® 200 advanced meter with datalogging and extensive I/O. It is offered in two voltage configurations:
• 277 Volt enclosure (comes equipped with a control power transformer)
• 120-240 Volt enclosure
NEMA 4X Enclosure
3
SHARK®200 METER
All fields must be filled in to create a valid part number.
OptionNumbers:
Example:
--
Voltage
277
120 -120-
240 Volts
277 - 277 Volts
Shark® 50B in Self-Enclosed Meter Assembly
All fields must be filled in to create a valid part number.
OptionNumbers:
Example:
--
V-Switch™ Pack
V2
V1MultifunctionMeter Only
V2V1 plus
Power and Frequency
V3V2 plus
Energy Counters
--
--
Communication
485P
XNone
485PRS485 and KYZ
Pulse Output
Voltage
277
120 -120-
240 Volts
277 - 277 Volts
Shark® 50 in Self-Enclosed Meter Assembly
Model
ENCSHK50
ENCSHK50Shark® 50 in NEMA1 Enclosure
ENC4XSHK50Shark® 50
in NEMA 4X Enclosure
Model
ENCSHK50B
ENCSHK50BShark® 50B in NEMA1 Enclosure
ENC4XSHK50BShark® 50B in NEMA 4X Enclosure
Frequency Current Input V-Switch™ Pack
All fields must be filled in to create a valid part number.
OptionNumbers:
Example: 60
5050 Hz
System
6060 Hz
System
10
10 5 Amp
Secondary
21 Amp
Secondary
--
-- V2
V1MultifunctionMeter Only
V2V1 plus
Power and Frequency
V3V2 plus
DNP 3.0 and Energy Counters
V4V3 plus
Limits and Harmonics
--
--
--
Power Supply
D2
D2 OptionUniversal, (90 to 265)
VAC @50/60Hz or (100 to 370)
VDC
--
Communication
485P
XNone
485PRS485 and KYZ
Pulse Output
INP10100BaseT
Ethernet and KYZ
Pulse Output
Voltage
277
120 -120-
240 Volts
277 - 277 Volts
Shark® 100 in Self-Enclosed Meter Assembly
Model
ENCSHK100
ENCSHK100Shark® 100 in NEMA1 Enclosure
ENC4XSHK100Shark® 100 in NEMA 4X Enclosure
NEMA 1 Enclosure Front Dimensions
11.0610.27
13.50
NEMA 4X Enclosure Front Dimensions
DIMENSIONAL DRAWINGS
ORDERING INFORMATION
11.54
13.73
4
Ordering Information
Electro Industries/GaugeTech 1800 Shames Drive • Westbury, NY 115901-877-EIMETER (1- 877-346-3837) • E-Mail: [email protected] Tel: 516-334-0870 • Web Site: www.electroind.com • Fax: 516-338-4741
E173702 111015 V.1.07
Frequency Current Input V-Switch™ Pack
All fields must be filled in to create a valid part number.
OptionNumbers:
Example: 60
5050 Hz
System
6060 Hz
System
10
10 5 Amp
Secondary
21 Amp
Secondary
--
-- V2
V1MultifunctionMeter Only
V2V1 plus 2 MB
Data-Logging Memory
V3V2 plus %THD
V4V3 plus
Limits and Control Functions
V5V4 plus
3 MB Data-Logging Memory and
64 Samples/Cycle Waveform Recorder
V6V4 plus
4 MB Data-Logging Memory and
512 Samples/Cycle Waveform Recorder
--
--
--
Power Supply
D2
D2 OptionUniversal, (90 to 265)
VAC @50/60Hz or (100 to 370)
VDC
--
I/O Slot 1
x
XNone
INP100S 10/100BaseT
Ethernet
RO1S2 Relay Outputs/
2 Status Inputs
PO1S 4 Pulse Outputs/
4 Status Inputs
1mAOS4 Channel
Analog Output 0-1
(Bidirectional)
20mAOS 4 Channel
Analog Output 4-20mA
FOSTS Fiber Optic Output ST Terminated
FOVPS Fiber Optic
Output Versatile Link Terminated
INP300SIEC 61850ProtocolEthernet
Voltage
277
120 -120-
240 Volts
277 - 277 Volts
Shark® 200 in Self-Enclosed Meter Assembly
I/O Slot 2
-- x
XNone
INP100S 10/100BaseT
Ethernet
RO1S2 Relay Outputs/
2 Status Inputs
PO1S 4 Pulse Outputs/
4 Status Inputs
1mAOS4 Channel
Analog Output 0-1
(Bidirectional)
20mAOS 4 Channel
Analog Output 4-20mA
FOSTS Fiber Optic Output ST Terminated
FOVPS Fiber Optic
Output Versatile Link Terminated
INP300SIEC 61850ProtocolEthernet
Model
ENCSHK200
ENCSHK200Shark® 200 in NEMA1 Enclosure
ENC4XSHK200Shark® 200 in NEMA 4X Enclosure
Frequency Current Input
All fields must be filled in to create a valid part number.
OptionNumbers:
Example: 60
5050 Hz
System
6060 Hz
System
10
10 5 Amp
Secondary
21 Amp
Secondary
--
--
--
--
Power Supply
D2
D2 OptionUniversal, (90 to 265)
VAC @50/60Hz or (100 to 370)
VDC
Voltage
277
120 -120-
240 Volts
277 - 277 Volts
Shark® 100B in Self-Enclosed Meter Assembly
Model
ENCSHK100B
ENCSHK100BShark® 100B
in NEMA1 Enclosure
ENC4XSHK100BShark® 100B in NEMA 4X Enclosure
https://electroind.com/product-info/self-enclosed-shark-meter-
assembly/