Natural Convection Ovens

Vacuum Ovens

OvensSELECTION GUIDE Natural Convection Ovens (Gravity)

DescriptionOperating

Temp. Range(℃/℉)

ChamberVolume

(L /cu ft)

TemperatureFluctuationat 100℃ [±℃/℉]

TemperatureVariation

at 100℃ [±℃/℉]Page

General Models

ON -02G Amb. +15 to 250 / Amb. +27 to 482

52 / 1.8

0.3 / 0.54

5.9 / 10.62

83ON -12G 91 / 3.2 7.5 / 13.5

ON -22G 135 / 4.8 6.9 / 12.42

EconomyModels

ON -01E Amb. +15 to 220 / Amb. +27 to 428

52 / 1.8 0.3 / 0.54 6.5 / 11.7

84ON -11E 100 / 3.5 0.4 / 0.72 4.1 / 7.38

ON -21E 150 / 5.3 0.5 / 0.9 7.3 / 13.14

Vacuum Ovens

DescriptionOperating

Temp. Range(℃/℉)

ChamberVolume

(L /cu ft)

TemperatureFluctuationat 100℃[±℃/℉]

TemperatureVariation

at 100℃[±℃/℉]Page

VacuumOV -11 Amb. +5 to 250

/ Amb. +9 to 48228 / 1 0.1 / 0.18

3.7 / 6.66 86OV -12 65 / 2.3 0.3 / 0.54

Accessories & OptionsDescription Page

for Convection Ovens 85

for Vacuum Ovens 87

e-mail: info@carlibiotec.it www.carlibiotec.it

Optimum Control FeaturesSafety Features Constructional Features

OvensGENERALAPPLICATIONS

TECHNICAL BENEFITS

General ApplicationsForced, Nature Convection Ovens & VacuumOF Models ON Models OV Models

General Aging and Curing •Agricultural Genetic • •Annealing • • •Asphalt Testing • •Conditioning • •Contamination-Free storage of semiconductors and other sensitiveelectronic components

•

Desiccating •Digestion of Proteins and Starches •Drying of Plant Tissue •Drug Metabolism • •Electronic Burn-in • •Epoxy and Plastic Curing • •Fine Chemical Precipitation •General Baking • •General Heating • •Glassware Drying • •Ideal for General Drying •Life and Exposure Studies • •Ordnance Material Testing • •Out-gassing Solids and Liquids •Paper Drying • •Plating •Precise Moisture Determination • •Preheating • •Rubber Drying • •Serum Protein Analysis • •Silicon Wafer Drying •Stability and QC/ Batch Testing • •Sterilization • •Suspended Solids Evaluation • •Textile Drying • •Vacuum Embedding •Volatile Resins and Polymers Testing •Vulcanization Studies • •

1) Self-protecting cut-off function and visual signals: - Over temperature safety function:

shuts the power that is being supplied to the heater and then the controller sequen-tially.

- 2 separate over-current fuses. (without large type)

2) Timer mode useful for delaying the start of a test or for stopping a test that has been running for a certain time:- Integrated time setting: Delay ON/OFF.

(from 1 min 99hr 59 min)

- Power interruption setting: After a power interruption select automatic run or manual run.

3) Door-open warning alarm (excludes OV Models):- Intermittent audible tone and visual LED

warning alarms. - After 5 minutes of the door being open

the heater and fan will automatically stop to protect the user.

1) Professional electronic and program control:- Microprocessor PID temperature control

with very simple calibration and auto-tuning feature.

- Conveniently preset 3 most commonly used temperature settings.

- Switch from Celsius to Fahrenheit. (℃ or ℉)

2) HMI (Human Machine Interface) control display network system:- Similar key arrangements to the temp.

& humid. chamber, bath, circulator, and shaker.

- User-friendly controls, splash proof / easy to clean keypad and clear LED display.

- Quick keypad lock key prevents accid-ental resetting of testing parameters.

1) High quality #304 grade stainless steel inner chamber and dirt repellent powder coated exterior surface. (except for OV Models)

2) Gasket minimizes heat loss and tightly seals the chamber door.

3) Fully insulated oven chamber prevents heat from escaping to the exterior surface.

4) Adjustable electropolished stainless steel shelving provides air flow around samples for unifor-med tempering and allow for easy cleaning.

Ovens

83

Natural Convection Ovens (General Models)

Specifications & Ordering Information

Model ON-02G ON-12G ON-22GChamber Volume (L / cu ft) 52 / 1.8 91 / 3.2 135 / 4.8

TemperatureRange (℃ / ℉) Amb. +15 to 250 / Amb. +27 to 482Fluctuation 1) at 100℃ (±℃ / ℉) 0.3 / 0.54Variation 1) at 100℃ (±℃ / ℉) 5.9 / 10.62 7.5 / 13.5 6.9 / 12.42

Dimension(W×D×H)

Interior (mm / inch)400×360×365/ 15.7×14.2×14.4

480×410×465/ 18.9×16.1×18.3

610×460×485/ 24×18×19

Exterior (mm / inch)577×542×760/ 22.7×21.3×30

657×592×870/ 25.9×23.3×34.3

785×642×897/ 30.9×25.3×35.3

Net Weight (Kg / lbs) 49 / 108 59 / 130 68 / 150Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6 A 7.4ACat. No. AAH11135K AAH11145K AAH11155KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10ACat. No. AAH11136U AAH11146U AAH11156U

1) Technical data according to DIN 12880.

Operating Features • From +15℃ above room temperature to 250℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature

settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.

Constructional Features • Gravity-flow convection with vertical airflow for uniform

sample heating. • Threefold tempered glass viewing window allows for easy

monitoring of samples. (optional)

• Fully insulated dual-wall door opens 180 degrees & featuring a pull down door handle.

• Rounded inner chamber corners for easy cleaning and better air-flowing.

• Corrosion-resistant incoloy sheath heater and stainless steel interior.

• Two circular adjustable top slide vents helps to control inner air vapor circulation. (38mm / 1.5˝ in dia.)

Ideal for high temperature storage with user-friendly design.ON-G Models is used for all sterilization and drying tasks that do not require high drying rates or special time requirements, ideal for drying applications requiring a gentle airflow.

ON-22G with optional Viewing WindowIncluded Accessories Optional Accessories

see page 85

• 2 Wire Shelves• Tempered Viewing Windows• Perforated Shelves

OvensO

84

Natural Convection Ovens (Economy Models)

Full features performance for general purpose lab ovens.ON-E series is a economical warm storage up to 220℃.

Operating Features • From +15℃ above room temperature to 220℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature

settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.

Constructional Features • Gravity-flow convection generates a vertical airflow of heat

for a uniformed heating of samples. • Moderately sized, an easy to clean spacious chamber, and an

easy to grip circular door handle. • Corrosion-resistant incoloy sheath heater and stainless steel

chamber. • Two circular adjustable top slide vents helps to control inner

air vapor circulation. (38mm / 1.5˝ in dia.) • 2 Wire Shelves• Perforated Shelves

ON-11EIncluded Accessories Optional Accessories

see page 85

Specifications & Ordering Information

Model ON-01E ON-11E ON-21EChamber Volume (L / cu ft) 52 / 1.8 100 / 3.5 150 / 5.3

TemperatureRange (℃ / ℉) Amb. +15 to 220 / Amb. +27 to 428Fluctuation 1) at 100℃ (±℃ / ℉) 0.3 / 0.54 0.4 / 0.72 0.5 / 0.9Variation 1) at 100℃ (±℃ / ℉) 6.5 / 11.7 4.1 / 7.38 7.3 / 13.14

Dimension(W×D×H)

Interior (mm / inch)375×370×370 / 14.8×14.6×14.6

455×430×510 / 18×17×20

585×460×555 / 23×18.1×21.9

Exterior (mm / inch)530×535×737 / 20.9×21.1×29

610×595×877 / 24×23.4×34.5

740×625×922 / 29.1×24.6×36.3

Net Weight (Kg / lbs) 34 / 75 46 / 101.4 59 / 130Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6 A 7.4ACat. No. AAH15015K AAH15025K AAH15035KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10ACat. No. AAH15016U AAH15026U AAH15036U

1) Technical data according to DIN 12880.

Ovens

85

Accessories & Options

Wire Shelves Stainless steel and electropolished shelf system is removed easily without using tools

for easy cleaning.

ModelsDescription

Cat. No.Included Maximum W×L (mm / inch)

OF-02G 2 8 366×316 / 14.4×12.4EDA8136

OF-02G-4C 8 32 366×316 / 14.4×12.4OF-12G 2 12 446×366 / 17.6×14.4 EDA8135OF-22G 2 14 516×416 / 20.3×16.4 EDA8134OF / ON-01E 2 10 366×316 / 14.4×12.4 EDA8136OF / ON-11E 2 14 446×366 / 17.6×14.4 EDA8135OF / ON-21E 2 15 576×419 / 22.7×16.5 EDA8137OF-300G / H 2 17 708×608 / 27.9×23.9 RTD1196OF-450G / H 3 26 708×608 / 27.9×23.9 RTD1196OF-750G / H 3 35 708×808 / 27.9×31.8 RTD1197ON-02G 2 8 366×316 / 14.4×12.4 EDA8136ON-12G 2 12 446×366 / 17.6×14.4 EDA8135ON-22G 2 12 576×419 / 22.7×16.5 EDA8137

Perforated Shelves Stainless steel shelf system is removed easily without using tools for easy cleaning.

ModelsDescription

Cat. No.Included Maximum

OF-02G 8 366×316 / 14.4×12.4AAA12531

OF-02G-4C 32 366×316 / 14.4×12.4OF-12G 12 446×366 / 17.6×14.4 AAA12532OF-22G 14 516×416 / 20.3×16.4 AAA12533OF / ON-01E 10 365×310 / 14.4×12.4 AAA12531OF / ON-11E 14 445×360 / 17.6×14.4 AAA12532OF / ON-21E 15 575×410 / 22.7×16.5 AAA12535OF-300G / H 17 708×608 / 27.9×23.9 AAA80604-2OF-450G / H 26 708×608 / 27.9×23.9 AAA80604-2OF-750G / H 35 708×808 / 27.9×31.8 AAA80604-3ON-02G 8 366×316 / 14.4×12.4 AAA12531ON-12G 12 446×366 / 17.6×14.4 AAA12532ON-22G 12 576×419 / 22.7×16.5 AAA12535

Recorders Easy recognizable digital recorders for efficient temperature indicating.

Models Description Cat. No.

OF-300, 450, 750 G/HRecorder (6 Point) AAA8T500Recorder (Thermal Line type) AAAE1503

Tempered Viewing Windows Optimized sample monitoring with threefold, tempered safety glass window.

(only for OF-G, ON-G Models)

ModelsDescription

Cat. No.Thickness, W×L (mm / inch)

OF / ON-02G 5, 150×280 / 0.2, 5.9×11 AAA12611OF / ON-12G, 22G 5, 150×380 / 0.2, 5.9×15 AAA12612

Fan-Speed Adjuster Adjustable inner air circulation speed, which protects spreading out powder sample.

(only for OF-G Models)

Models Description Cat. No.

OF - 02G, 12G, 22G Analog Dial Control AAA12701

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.

Wire Shelves

Perforated Shelves

Tempered Viewing Windows

Fan Speed Adjuster

for Forced & Natural Convection Ovens

OvensO

86

Vacuum Ovens

Optimal vacuum oven with a wide temperature range for various test applications.OV series ovens are ideal for separating solvents from solutions without using high temperature drying and for drying solvents with high boiling points in a vacuum ovens reduces the boiling point of the solvent to make drying easy.

Operating Features • From +5℃ above room temperature to 250℃. • Vacuum range: 0 to 0.1MPa. (analog vacuum gauge) • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature

settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads. • RS-232 interface available.

Constructional Features • Separate vacuum and vent ports: the narrow vent line controls

the vacuum rate and inert. (wider the vacuum line, the faster the vacuum is produced)

• Tight gasket seal and push-button latch. • Block type heater distributes heat evenly from the chamber

exterior to the anodized. • Heat tempered spring load glass door gives a tight vacuum

seal and convenient for continuous monitoring of samples. • Moderately sized oven with user-friendly all-in-one control

panel. • Upon request available with Viton (fluorine rubber) door gasket.

(optional)

OV-11Included Accessories

Optional Accessorie see page 87

• Plate Shelve, 3.0mm (0.12˝): 2 for OV-11 / 3 for OV-12

• Safety Cover• Viton Gasket• Vacuum Pumps and Oil Mist Trap• Cold Trap Baths and U-type Glass Trap

Specifications & Ordering Information

Model OV-11 OV-12Chamber Volume (L / cu ft) 28 / 1 65 / 2.3

Vacuum Range 0~0.1MPa, Analog

Nozzle Size (mm / inch) Vacuum Ø10 / 0.4, Vent Ø10 / 0.4

Temperature

Range (℃ / ℉) Amb. +5 to 250 / Amb. +9 to 482

Fluctuation 1) (±℃ / ℉ at 100℃) 0.1 / 0.18 0.3 / 0.54

Variation 1) (±℃ / ℉ at 100℃) 3.7 / 6.66

Dimension(W×D×H)

Interior (mm / inch) 302×305×302 / 11.9×12×11.9 402×405×402 / 15.8×15.9×15.8

Exterior (mm / inch) 680×453×495 / 26.8×17.8×19.5 780×557×595 / 30.7×21.9×23.4

Net Weight (Kg / lbs) 63 / 139 103 / 227

Electrical Requirements (230V, 50 / 60 Hz) 5.3A 6.1A

Cat. No. AAH13115K AAH13125K

Electrical Requirements (120V, 50 / 60 Hz) 10A 11.7A

Cat. No. AAH13116U AAH13126U

1) Technical data according to DIN 12880.

Ovens

87

Accessories & Options

Safety Covers

Viton Gaskets

Vacuum Pumps

Cold Trap Baths

(Organization chart for use of Vacuum oven with Pump and Cold trap bath)

Safety Covers Netted steel frame and polycarbonate sheet covering prevents the glass door from

exploding.

Models Description Cat. No.OV-11 Safety Cover AAA13603OV-12 Safety Cover AAA13604

Gaskets Upon request available with Viton (fluorine rubber) door gasket.

Models Description Cat. No.

OV-11Silicone Gasket FAA5146Viton (fluorine rubber) Gasket FAA5187

OV-12Silicone Gasket FAA5147Viton (fluorine rubber) Gasket FAA5188

Related Products for Vacuum Ovens

Vacuum Pumps Rotary vacuum pump equipped with direct connect oil seal prevents air reflux,

essentially used with vacuum ovens to achieve a higher level of vacuum pressure.

Oil mist trap, an optional feature, prevents oil in-flow. (refer to page. 69 for more specific information)

Models Electrical Requirements Cat. No.MVP-6 230V, 50 / 60Hz BEH73005KRelated Accessory Oil Mist Trap BEH73501

Cold Trap Baths Preventing vacuum pumps in a condition of vacuuming as a cold trap to prevent

vapors from a vacuum pump Included 2 U-type glass traps. (refer to page. 18 for more specific information)

Models Description Cat. No.

CTB-10230V, 60Hz AAH62011K230V, 50Hz AAH62012K

Related Accessory U-type Glass Trap AAA62501

※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us.

for Vacuum Ovens