selected aspects of type-i elm power load in asdex upgrade (and comparison to jet)
DESCRIPTION
Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET). T.Eich. Brief history: Assessment of ELM power load Temporal evolution of divertor power deposition In/Out asymmetry of divertor target load. 07/05/2007, ITPA Meeting (DIVSOL/PEP Joint Session), Garching. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/1.jpg)
1/11
Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)
07/05/2007, ITPA Meeting (DIVSOL/PEP Joint Session), Garching
T.Eich
Brief history: Assessment of ELM power load Temporal evolution of divertor power deposition In/Out asymmetry of divertor target load
![Page 2: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/2.jpg)
2/11
Thermal material ablation limit
• For assessment of ELM thermal load we need to know:
energy (per ELM, fraction deposited on inner/outer target)
power decay width ( λp, toroidal asymmetry, ELM structure)
power deposition time scales (tparallel, tperpendicular)
IRfff
R
C
TE
divertoroutin
divELMIR
material
ELMtolerableELM
tolerable
/
2
Radiation, see talk by R.A.PittsWall load, talk by W.Fundamenski
![Page 3: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/3.jpg)
3/11
Experimental observation
• Data taken from USN discharges• Non tilted (divertor) target tiles with virgin surfaces installed• Always pairs of discharges with both field direction• Data taken early in the campaign• Only some hundred plasma seconds, surface layer should be much smaller than for standard divertors (JET,AUG)• No chance for surface layers to grow asymmetric• Shunt measurements for target currents available
![Page 4: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/4.jpg)
4/11
Parallel transport time scales
2
,
2
,
2
,,, exp1)(
tttAtp oioioi
oioi
outerinnerouterinner LL //
Fit of target response:Maxwellian distribution of particle energies with Te and otherwise only geometry (and amplitudes)
W.Fundamenski, PPCF 2006, p. 109
Works well for low density cases
![Page 5: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/5.jpg)
5/11
Field dependence of power asymmetryNormal field (#16725)Reversed field (# 16724) T.Eich, PPCF 47, p.815
In normal field more ELM power on inner divertor than on outer
![Page 6: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/6.jpg)
6/11
In/Out asymmetries
A simple ELM parallel transport model is hard to get in line with a
larger fraction of energy found on inner divertor (in normal field)
Power deposition integrated over ELM duration on the outer/inner
divertor target giving ELM target energies: Eouter, Einner
The sum, the difference and the ratio of these ELM energies:
Eouter + Einner, Eouter - Einner, Einner / Eouter
Target current onto inner and outer target integrated over ELM
duration gives (net) charge CELM flowing through targets due to the ELM
All presented data are based on coherent ELM averaging (≈20 ELMs)T.Eich, Journal Nucl.Mater., in print
![Page 7: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/7.jpg)
7/11
‘normal’ ion B x grad(B) direction
• More energy (power) deposited on inner target than on outer target
• Charge (current) → net negative charge flows through outer target
• Charge (current) for inner and outer target are equal (within error bars) in absolute size and opposite in sign
AUG upper divertor
‘hot Te’
‘cold Te’
![Page 8: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/8.jpg)
8/11
Observation: target with net negative charge flowing through that target receives less energy during ELMs
‘reversed’ ion B x grad(B) direction
• More energy (power) deposited on outer target than on inner target
AUG upper divertor
• Charge (current) → net negative charge flows through inner target
‘cold Te’
‘hot Te’
![Page 9: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/9.jpg)
9/11
ELM energy difference vs. charge difference
• The difference of ELM deposited energy on the targets is well correlated with charge flowing through the targets during ELMs
• Both quantities switch sign with field direction
• Slope of the line for the two field directions is different
line goes through zero
Cha
rge
(As)
for ‘normal’ field
As
kJ
C
EE
ELM
innerouter
5
5
1outer
inner
E
E
Diagnostical artefacts (i.e. surface layer) are neglegible
![Page 10: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/10.jpg)
10/11
Comparison JET and ASDEX Upgrade
AUG JET
• JET & AUG + (ELM target energy < 100kJ) : 1 ≤ Einner / Eouter ≤ 2
• Only JET + (ELM target energy > 100kJ) : Einner / Eouter ≈ 2
Focusing on ‘normal’ field:
![Page 11: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/11.jpg)
11/11
Summary
• Temporal evolution of power deposition can be well approxiamted by a simple transport model (maxwellian distribution of particles)
• Amplitudes of the ELM power load are not understood
• ELM energy difference between the targets is well correlated to a net target charge flowing through the targets during an ELM
• In absence of a charge difference, the ELM divertor target energy gives a balanced in/out ratio fitting to the convective transport model
• There appears an unidentified parameter for Eouter-Einner which seems to play a less significant role for large ELMs (>100kJ) at JET
![Page 12: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/12.jpg)
12/11
Same JET data as on previous slide
Unclear if pedestal or target properties cause variation
![Page 13: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/13.jpg)
13/11
8 field lines started from =0 (poloidal) and =101,79,58, 43,19,350,327,314. ~21: n=360/ 21=17.
Spatial ELM structure
![Page 14: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/14.jpg)
14/11
Field line tracing in equilibrium field
Outer path of field lines approaches upper X-point
Inner path of field lines goes by upper and lower X-point
Quasi toroidal symmetric
Largest toroidal asymmetry
![Page 15: Selected aspects of type-I ELM power load in ASDEX Upgrade (and comparison to JET)](https://reader035.vdocuments.us/reader035/viewer/2022070417/5681537e550346895dc182fb/html5/thumbnails/15.jpg)
15/11
Temporal evolution
DOC-L current and gas scan