select appropriate magnetic separator design

8
Select Appropriate Magnetic Separator Design Submitted By: eyuan Separation

Upload: leyuan-separator

Post on 16-Aug-2015

11 views

Category:

Services


2 download

TRANSCRIPT

Page 1: Select appropriate magnetic separator design

Select Appropriate Magnetic Separator Des

ign

Submitted By:

Leyuan Separation

Page 2: Select appropriate magnetic separator design

Magnetic separators for sale can be seen in an extensive variety of pattern, that includes Bar magnetic separator, plate magnetic separator or grate magnetic separator etc.

Bar magnetic separators are permanent non-electric magnetic separator that can be used as a part of an extensive variety of uses. They are used to remove ferrous contaminants exhibit in little, shallow quantities of streaming powder, granules, strands and liquids.

Page 3: Select appropriate magnetic separator design

Plate magnetic separators are used as a part of the base of an inclined chute or suspended above conveyor belts or stainless steel vibratory feeders. They are used to remove ferrous contaminants that happen sporadically in products lines, especially extensive bits of metal, for example, nuts, bolts or staples from dry products.

Grate magnetic separators have magnetic tubes composed in a system to permit the stream of material to course however a grate. They spread magnetic protection through cross-separated territories of equipment, for example, funnels or containers. They can be used to remove fine or generally huge bits of metal contaminants with this magnetic separator design.

Page 4: Select appropriate magnetic separator design

Liquid line trap magnetic separators are traps with tube magnets inside them, composed with a channel port to match existing pipelines. The magnet gathers metal pieces like baling wire or staples.

Suspended magnetic separators hang above conveyor belts and separate metal pieces from the material as they go under the magnet. They separate huge bits of metal and can secure equipment, for example, crushers, from harm.

Page 5: Select appropriate magnetic separator design

How to select magnetic separator for sale products?

Please advise us the above necessary information to make inquiry. If you aren’t in a position to offer these information, please feel free to contact our engineer and acquaint us with the application environment and material condition.

The baffle is used to direct the material onto or close the poles when they stream down. By along these lines, more contaminants will be attracted. Baffle can be little bars or 90 degree point.

Page 6: Select appropriate magnetic separator design

Including handles goes for simple administrator. Particularly with huge size which is too overwhelming to handle. Another point of preference of this configuration is to keep away from contaminants dropping down when holding.

Page 7: Select appropriate magnetic separator design

Designs of Multiple layers

Multiple layers in magnetic separator design comes in double layers. Obviously, more layers means product is much purer. However, it relies on upon the condition of products.

Easy to clean designs

This design is all the more conveniently to be cleaned. Simply take out the magnetic center, the iron pollution influences will tumble from the shell.

Page 8: Select appropriate magnetic separator design