see security is an australian owned and operated · see security is an australian owned and...

SEE Security is an Australian owned and operated

company. We pride ourselves in manufacturing and

distributing a comprehensive range of products to

serve the needs of the electronic, electrical and

security industries.

Our in-depth knowledge of the Australian CCTV and

equipment and enclosure industries allow us to

provide a range of intelligent and innovative solutions.

CONTENTS

ENVIRONMENTAL HOUSINGSECO & ECOSS 4LPAR400 & LPAR400SS 5LPAR480 6LPAR600 7

EXTERNAL DOME HOUSINGSRMDHWP & RMDHWP300 8LP235 9LP300 10SA220 11SS220 12

INTERNAL DOME HOUSINGSRMDH & RMDH300 13RM150 14RM180 15CMDH 16SP300 & SP300D 17

CORRECTIONAL SERVICES HOUSINGSTH SERIES 18CMH SERIES 19CMH02WM 20CMH02WP 21CMH02WMWP 22CMH03 23CMSW01 24

WEDGE HOUSINGSSMW5 & SMW5SS 25SMW5PM & SMW5PMSS 26SMW5PMPT & SMW5PMPTSS 27RMW5 & RMW5SS 28RMW2 29SMW1 30SMW2 31SMW3 32

RACK ENCLOSURESERC6 33

Dropper Kits 35

Mounting Guides 36

Mounting Accessories 38

Housing DimensionsEnvironmental Housings 40External Dome Housings 41Internal Dome Housings 42Correctional Services Housings 43Wedge Housings 44Rack Enclosures 46

Mounting Plates 47

Index 50

3

AECOSS

AECO

ECO ENVIRONMENTAL HOUSING

EN

VIR

ON

ME

NTA

L

IP66 Outdoor camera housing for general purpose applications.

The ECO housing is designed to accommodate 1/4” to 1/3” CCD cameras fitted with fixed and zoom lenses. The camera lens combination, up to the recommended maximum length, allows at least 100mm clear space behind the camera for connections.

The pivoting lid swings clear of the lens to allow camera access and set up with the cover open. In this design the installer has full access to the sides, top and rear of the camera and lens. The camera is mounted on a clamped plate for fast install and removal.

SPECIFICATIONS

ConstructionECO- 1.2mm 1.6mm & 2.0mm zincannealECOSS- 1.2mm & 1.6mm stainless steel.

FinishECO- Mossvale sands (light beige) polyester powder coat. ECOSS- White polyester powder coat.

Lens4.8mm arris edged glass.

Cable Entry3 x 20mm entries, two in the base and one positioned at the rear of the housing.

Access3 x 6mm pan head screws. ElectricalOptional heater thermostat 24 VAC 50Hz 11watts. Fan 24VAC 50Hz 3.2 watts. Alternate voltages available.

Max. Camera Size220mm (L) x 115mm (W) x 86mm (H).

WeightECO- 4.5kg ECOSS- 4.7kg

OPTIONS

A pole mount adaptor, tamper switch, demister heater and fan are optional with the ECO housing. ECO is also available in powder coated zinc anneal (ECO) for economy and powder coated 304 stainless steel (ECOSS) finish for corrosive environments. Comes complete with manual pan tilt and wall bracket.

Refer to Mounting Guide on page 36 and Housing Dimensions on page 40.

APPLICATIONS

Mounted off poles, building walls or in factories. The ideal economical robust general purpose camera housing.

PART NUMBER DESCRIPTION

ECO External housing complete with wall mount bracket and manual pan tilt bracket.

ECOSS Stainless steel housing complete with wall mount bracket and manual pan tilt bracket.

ECOSEC 3 x M6 security screws and allen key for added security.

FANHTR Fan heater to suit ECO & LPAR series housings.

HTR Heater thermostat to suit ECO & LPAR400 housings.

TSW Tamper switch to suit ECO & LPAR series housings.

4

ALPAR400

ALPAR400SS

LPAR400ENVIRONMENTAL HOUSING

EN

VIR

ON

ME

NTA

L

IP66 Outdoor camera housing for general purpose and corrosive applications.

Available in a powder coated zincanneal/aluminium combination for general purpose use. For installations in more corrosive environments- powder coated stainless steel is also available.

The LPAR range of housings are designed to accommodate 1/4” to 1/3” CCD camera fitted with fixed and zoom lenses. There is a 100mm clear space behind the camera for connections when the maximum camera lens combination is used.

SPECIFICATIONS

ConstructionLPAR400- 1.6mm zincanneal body, aluminium sun shield.LPAR400SS- 1.2mm stainless steel.

FinishMossvale sands (light beige) polyester powder coat.

Lens4.8mm arris edged safety glass. Optional 6.0mm polycarbonate.

Cable Entry4 x 20mm knockouts, supplied with 2 x 20mm compression glands and 2 x 20mm grommets.

Access4 x 6.0mm stainless steel post cap security screws. ElectricalOptional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC50Hz 3.2 watts. Washer/wiper 24VAC 50Hz. Alternate voltages available.

Max. Camera Size284mm (L) x 135mm (W) x 86mm (H). 120mm height availablewith custom camera sled.

WeightLPAR400- 3.9kg LPAR400SS- 4.2kg

OPTIONS

Choose from the heavy duty wall bracket, extended wall bracket, wire through wall bracket/pan tilt or pole mount to suit your particular purpose. The mounting brackets and pan tilts are a separate item and are not included in the price of the housing inthis series.

Heater thermostat, fans, washer/wiper, a range of tamper switches, mounting brackets, pan tilts and security locking devices are optional with the LPAR400 & LPAR400SS.


APPLICATIONS

Mounted off poles, building walls or in factories. Also ideal for use in mines.


LPAR400 External housing for medium to large camera lens combinations.

LPAR400SS Stainless steel external housing for medium to large camera lenscombinations.

FANHTR Fan heater to suit ECO & LPAR series housings.

HTR Heater thermostat to suit ECO & LPAR400 housings.


5

ALPAR480

LPAR480 ENVIRONMENTAL HOUSING

EN

VIR

ON

ME

NTA

L

IP66 Outdoor camera housing for general purpose applications.

Available in a powder coated zincanneal for general purpose use.The LPAR range of housings are designed to accommodate 1/4” to 1/3” CCD camera fitted with fixed and zoom lenses. There is a 100mm clear space behind the camera for connections when the maximum camera lens combination is used.

SPECIFICATIONS

Construction1.6mm zincanneal body and sun shield.


Lens4.8mm arris edged safety glass. Optional MR10 lexan.

Cable Entry2 x 20mm PVC cable compression glands and 2 blanking grommets.

Access2 x Southco stainless steel rotary clasps at the rear of the lid. ElectricalOptional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC50Hz 3.2 watts.

Max. Camera Size371 mm (L) x 178mm (W) at the camera platform reducing to151mm at the inside top of the lid x 140 mm (H). 170 mm heightavailable without the camera sled.

WeightLPAR480- 8.9kg.

OPTIONS

The HDWMB3 and HDMPT2 wall bracket and manual pan tilt are the only standard mounting hardware available for the housing. These mounting brackets and pan tilts available as optional extras and are not included in the price of the housing.


APPLICATIONS

Mounted off poles, building walls or in factories. Also ideal for use in mines.


LPAR480 External housing complete with wall mount bracket and manual pantilt bracket.

FANHTR480 Fan heater to suit LPAR480 housings.


6

ALPAR600

LPAR600ENVIRONMENTAL HOUSING

EN

VIR

ON

ME

NTA

L

IP66 Outdoor camera housing for light weight extra large camera and lens combinations.

The LPAR600 housing is an indoor/outdoor general purpose housing manufactured from aluminium. The enclosure can house a large camera telephoto lens and is suitable for applications that demand higher levels of corrosion resistance.Pivoted lid construction as per ECO and LPAR series allows ease of camera set up. The camera is mounted on a clamped plate for fast installation and removal.

SPECIFICATIONS

Construction1.6mm aluminium body and sun shield.

FinishWhite polyester powder coat for the exterior with black texturefor the interior of the lid to eliminate reflection.

Lens6.0mm arris edged safety glass. Optional MR10 Lexan.

Cable Entry2 x 20mm PVC cable compression glands and 2 blankinggrommets.

Access2 x Southco stainless steel rotary clasps at the rear of the lid. ElectricalOptional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC50Hz 3.2 watts. Alternate voltages available.

Max. Camera Size460mm (L) x 225mm (W) at the camera platform reducing to180mm at the inside top of the lid x 180mm (H). 170mm heightavailable without the camera sled.

WeightLPAR600- 5.45kg.

OPTIONS

Heater thermostat, fans, washer/wiper, a range of tamper switches and security locking devices are available.


APPLICATIONS

Suitable for along roads & highways and for surveillance at ports and airports.


LPAR600 External housing for large and extra large camera lens combinations.

FANHTR600 Fan heater to suit LPAR600 housings.


7

BRMDHWP300

BRMDHWP

RMDHWP EXTERNAL DOME HOUSINGS

EX

TE

RN

AL D

OM

E

IP66 General purpose recess mounted exterior dome housing suitable for fixed cameras.

The RMDHWP series are exterior weatherproof dome housings. The standard back box is manufactured from aluminium. This range of housings are designed for CCD cameras and are recommended to a maximum length of 200mm for the RMDHWP and 280mm for the RMDHWP300. The size of the camera and lens that can be housed with the RMDHWP will be dependant on the angle of view of the camera.The camera mount bracket is universally adjustable and has a dual locking action to eliminate movement in high wind load conditions. Cable entry to the housing is through a 20mm PVC cable gland centrally mounted which also serves as the camera mount pivot.

SPECIFICATIONS

Construction1.2mm aluminium body. Mild steel camera mount bracket.


Lens3.0mm acrylic dome.

Cable Entry1 x 20mm cable gland at top rear of housing.

Access2 x Southco stainless steel rotary clasps at the rear of the lid.

Max. Camera SizeRMDHWP- 200mmRMDHWP300- 280mmMaximum possible camera length will be dependant onangle of view required.

WeightRMDHWP- 1.6kg.RMDHWP300- 1.95kg.

OPTIONS

An additional dome liner which can mask the camera location is also available.


APPLICATIONS

Ideal for under eaves or recess mount.


RMDHWPT 250mm weatherproof dome with tinted lens.

RMDHWPC 250mm weatherproof dome with clear lens.

RMDHWP300T 300mm weatherproof dome with tinted lens.

RMDHWP300C 300mm weatherproof dome with clear lens.

RMLINER 250mm aluminium liner with viewing slot.

RMLINER300 300mm aluminium liner with viewing slot.

8

BLP235

LP235EXTERNAL DOME HOUSINGS

EX

TE

RN

AL D

OM

E

Attractive and compact indoor/outdoor fixed camera dome housing.

The LP235 has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan phillips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.

SPECIFICATIONS

Construction1.6mm aluminium.

FinishBlack texture polyester powder coat on underside and pearlwhite on outer body.

Lens6.0mm acrylic.

Cable EntryThrough wall brackets and adaptors.

AccessM4 pan philips. ElectricalOptional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC50Hz 3.2 watts. Alternate voltages available.

Max. Camera Size190mm. Maximum possible camera length will be dependant onangle of view required.

WeightLP235- 1.95kg.

OPTIONS

Two wall mount brackets and a pendant adaptor are available for the housing. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.

Wall brackets are designed to be used with SEE Security standard pole and corner mount adaptors.


APPLICATIONS

Designed for mounting off walls or directly from the ceiling.


LP235T 190mm powder coated aluminium weatherproof dome with tinted lens.

LP235C 190mm powder coated aluminium weatherproof dome with clear lens.

9

BLP300

LP300 EXTERNAL DOME HOUSINGS

EX

TE

RN

AL D

OM

E


The LP300 has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan phillips screws. A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.

SPECIFICATIONS



Lens6.0mm acrylic.


AccessM6 pan philips. ElectricalOptional heater thermostat 24VAC 50Hz 11watts. Fan 24VAC50Hz 3.2 watts. Alternate voltages available.


WeightLP300- 2.70kg.

OPTIONS

Two wall mount brackets and a pendant adaptor are available for the housing. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.



APPLICATIONS



LP300T 230mm powder coated aluminium weatherproof dome with tinted lens.

LP300C 230mm powder coated aluminium weatherproof dome with clear lens.

10

ASA220

SA220 EXTERNAL DOME HOUSINGS

EX

TE

RN

AL D

OM

E


The SA220 housing has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan philips screws.

A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.

SPECIFICATIONS



Lens3.0mm acrylic.


AccessM4 pan philips.


WeightSA220- 2.45kg.

OPTIONS

Two wall mount brackets and a pendant adaptor are available for the housings. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.


PTZ minidome compatible options are available, allowing a common enclosure for installations where combinations of fixed and PTZ units are used. Tamper switches and lens liners are available as options.

Refer to Mounting Guide on page 37, Dropper Kits on page 35 and Housing Dimensions on page 41.

APPLICATIONS



SA220T 220mm powder coated aluminium weatherproof dome with tinted lens.

SA220C 220mm powder coated aluminium weatherproof dome with clear lens.

TSW SASS220 Tamper switch to suit SA220 & SS220 housings only.

11

ASS220

SS220 EXTERNAL DOME HOUSINGS

EX

TE

RN

AL D

OM

E

SPECIFICATIONS

Construction1.6mm stainless steel.

FinishPolished stainless steel outer body, black texture polyester powder coat on underside and interior of body.

Lens3.0mm acrylic.


AccessM4 pan philips.


WeightSS220- 3.45kg.

OPTIONS

Two wall mount brackets and a pendant adaptor are available for the housings. Custom droppers should provide a 1” B.S.P. female socket for pendant adaptors to thread into.


PTZ minidome compatible options are available, allowing a common enclosure for installations where combinations of fixed and PTZ units are used. Tamper switches and lens liners are available as options.

Refer to Mounting Guide on page 37, Dropper Kits on page 35 and Housing Dimensions on page 41.

APPLICATIONS



The SS220 housing has been designed for general purpose installations where aesthetic appeal is important. Access to the camera is via the front acrylic cover. The cover is attached to the main housing by three M4 pan philips screws.

A versatile camera mounting bracket allows the correct pan tilt positioning of the camera lens.


SS220T 220mm stainless steel weatherproof dome with tinted lens.

SS220C 220mm stainless steel weatherproof dome with clear lens.

TSW SASS220 Tamper switch to suit SA220 & SS220 housings only.

12

BRMDH

BRMDH300

RMDH INTERNAL DOME HOUSINGS

INTE

RN

AL D

OM

E


RMDHT 250mm dome housing with tinted lens.

RMDHC 250mm dome housing with clear lens.

RM LINER 250mm aluminium liner with viewing slot.

RMDH300T 300mm dome housing with tinted lens.

RMDH300C 300mm dome housing with clear lens.

RM300 LINER 300mm aluminium liner with viewing slot.

Interior recess mounted dome housing for in-ceiling applications.

The RMDH series are designed to accommodate fixed CCD cameras. The size of the camera will ultimately be dependant on the angle of view. Construction of the enclosure incorporates an aluminium back box, adjustable camera bracket and dome lens.

Clear and tinted lenses are available, secured by spring clips that allow 360 degree rotation of the lens on the housing. The fully adjustable camera bracket, allows full use of the dome surface should it become scratched, and ease of camera set up on installation. Cable entry to the housing is through a 20mm PVC cable gland centrally mounted which also serves as the camera mount pivot.

SPECIFICATIONS

Construction1.2mm aluminium body, mild steel camera mount bracket.

FinishBlack texture powder coat in standard housing.

Lens3.0mm acrylic dome in clear or 332 tint.

Cable Entry1 x 20mm PVC cable gland at top rear of the housing.

Access3 x spring clips.

Max. Camera SizeRMDH- 200mm.RMDH300- 280mm.Maximum possible camera length will be dependant on angle ofview required.

WeightRMDH- 1.5kg.RMDH300- 1.9kg.

OPTIONS

A dome liner can be used to hide the camera positionwithin the dome and is an economic alternative to a painted lens.

When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RMDHC.

Refer to Dropper Kits on page 35 and Housing Dimensions on page 42.

APPLICATIONS

Indoor housings for recess mounted, in-ceiling applications.

13

ARM150

RM150 INTERNAL DOME HOUSINGS

INTE

RN

AL D

OM

E

SPECIFICATIONS

Construction0.9mm mild steel back body. Aluminium ceiling trim ring and2.0mm mild steel camera bracket. Flame retardant cotton backcover.

FinishCeiling white polyester powder coat for the ceiling trim ring. Black texture for the back box and internal assembly in standard housing.

Lens3.0mm acrylic dome 332 tint.

Access2 x M4 pan round head screws.

Max. Camera Size190mm. Maximum possible camera length will be dependant onangle of view required and ceiling thickness.

WeightRM150- 1.0kg.

OPTIONS

When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RM150T.

Refer to housing Dimensions on page 42.

APPLICATIONS

This model is ideal for installations with low ceiling height.


The RM150 is a compact recess mounted dome camera housing. Construction of the RM150 incorporate a cloth back box, metal frame, lens and adjustable camera bracket.

The versatile adjustable camera bracket in the housing offers a better view compared with other similar housings on the market. This flexibility allows the camera to be aligned to and in contact with the dome lens in almost any viewing position, thus improving picture quality by reducing reflection and distortion.

It should be noted that with smaller dome housings, angles of view approaching parallel to the ceiling cannot be achieved. This is due to the camera not being able to drop down into the lens where the optics are suitable. The upper section of the lens that allows this tooccur is not suitable for clear images. As a guide, 29 degrees down angle to the ceiling is the maximum recommended.


RM150T 150mm recess mounted dome housing with tinted lens.

RM150C 150mm recess mounted dome housing with clear lens.

14

ARM180

RM180 INTERNAL DOME HOUSINGS

INTE

RN

AL D

OM

E


RM180T 180mm recess mounted dome housing with tinted lens.

RM180C 180mm recess mounted dome housing with clear lens.


SPECIFICATIONS

Construction0.9mm mild steel back body. Aluminium ceiling trim ring and2.0mm mild steel camera bracket. Flame retardant cotton backcover.

FinishCeiling white polyester powder coat for the ceiling trim ring. Black texture for the back box and internal assembly in standard housing.

Lens3.0mm acrylic dome 332 tint.

Access2 x M4 pan round head screws.

Max. Camera Size190mm. Maximum possible camera length will be dependant onangle of view required and ceiling thickness.

WeightRM180- 1.5kg.

OPTIONS

When ordering place ‘T’ for tinted or ‘C’ for clear at the end of the part number. eg. RM180T.

A dome liner can be used to hide the camera positionwithin the dome and is an economic alternative to a painted lens.


APPLICATIONS

This model is ideal for installations with low ceiling height.


The RM180 is a compact recess mounted dome camera housing. Construction of the RM180 incorporate a cloth back box, metal frame, lens and adjustable camera bracket.

The versatile adjustable camera bracket in the housing offers a better view compared with other similar housings on the market. This flexibility allows the camera to be aligned to and in contact with the dome lens in almost any viewing position, thus improving picture quality by reducing reflection and distortion.

It should be noted that with smaller dome housings, angles of view approaching parallel to the ceiling cannot be achieved. This is due to the camera not being able to drop down into the lens where the optics are suitable. The upper section of the lens that allows this tooccur is not suitable for clear images. As a guide, 29 degrees down angle to the ceiling is the maximum recommended.

15

ACMDH

CMDH INTERNAL DOME HOUSINGS

INTE

RN

AL D

OM

E

SPECIFICATIONS


FinishCeiling white exterior and black texture interior polyester powder coat.

Lens3.0mm acrylic dome in clear or 332 tint.

Access3 x M4 pan head screws.

Max. Camera Size190mm.

WeightCMDH- 1.8kg.

OPTIONS

When ordering place ‘C’ for clear or ‘T’ for tinted at the end of the part number. eg: CMDHT. A tinted housing will be supplied should a preference not be stated.


APPLICATIONS

The CMDH is ideal for on-ceiling applications where recessing is not an option and reduced installation costs are important.

Interior surface mount dome housing for on-ceiling applications.

Stylish surface mount aluminium back box and trim ring dome housing allows a professional finish for on ceiling installations without the excessive size required for acrylic dome only to cover the camera and bracket.

The CMDH is designed to accept the standard RMLINER which hides camera position and has the added benefit of a rotating 360 degree lens. This allows the lens to be repositioned should it become damaged in the viewing area. This option provides an economic alternative to painted lenses.


CMDHT 250mm on-ceiling mounted dome enclosure with clear lens.

CMDHC 250mm on-ceiling mounted dome enclosure with tinted lens.

RM LINER 250mm aluminium liner with viewing slot.

CMSK Security kit. 33 x post button security screws- M4 to suit CMDH only.

16

CSP300

CSP300D

SP300 INTERNAL DOME HOUSINGS

INTE

RN

AL D

OM

E


SP300T 300mm pendant dome with tinted lens.

SP300C 300mm pendant dome with clear lens.

SP300D 300mm dummy dome with black acrylic lens, camera mount not included.


SPECIFICATIONS

Construction1.2mm Aluminium body, mild steel camera mount bracket.

FinishWhite polyester powder coat with black texture interior instandard housing.

Lens3.0mm acrylic dome 332 tint or solid black for SP300D.

Access4 x spring clips.


WeightSP300- 2.55kg.SP300D- 1.95kg.

OPTIONS

An aluminium slotted liner is available to hide camera direction while allowing use of clear or lightly tinted lens, improving camera performance.

Refer to Dropper Kits on page 35 and Housing Dimensions on page 42.

APPLICATIONS

Indoor housing used to mount directly off ceilings using a mounting pole. Used in supermarkets and aisles.

Interior pendant dome housing.

The SP300 range of 300mm diameter pendant domes are designed to house CCD camera installations that have high ceilings where there is plenty of space. Ideal for supermarket aisles and warehouse projects.

The lens and fully adjustable camera bracket design are similar to the RMDH series and allow full use of the dome surface (360 degrees) should it become scratched.

A dummy version of the model is also available- SP300D.

17

CTH724

BTH600

BTH485

CTH300

CTH242

TH SERIES CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

SPECIFICATIONS

Construction1.6mm zincanneal.

FinishBlack texture polyester powder coat in standard housing.

Lens6.0mm polycarbonate.

AccessM6 post cap security screws.

Cable EntryOpen triangular space at top rear of the housing.

Max. Camera SizeRefer to ‘B’ dimension for overall depth details.

OPTIONS

All housings are supplied with adjustable camera mounts. Tamper and vibration sensing switches are available for all models.

APPLICATIONS

Correctional services housings designed to fit in corners, against the ceiling.

Secure triangular corner mount housings to suit PCB and conventional cameras commonly used in Correctional Service environments.

The cover is recess mounted into the steel frame ensuring that tools cannot be inserted to prise the lens away from the housing. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues.

New bracket design for the 485 and 600 models allows easier adjustment and more positive locking action for the camera. The CMH01 & CMH02 accept similar sized cameras as the TH485 & TH600 in a more compact housing when space is limited.

PART NUMBER DESCRIPTION WEIGHT

TH242 242mm triangular housing. 1.0kg





TSWTH Tamper switch to suit TH485, 600 & 724 housings.

Model Number Dimension A Dimension B

TH242 242mm 75mm

TH300 300mm 92mm

TH485 485mm 130mm

TH600 600mm 228mm

TH724 724mm 290mm

18

A

B

CCMH02SS

BCMH01

ACMH02

CMH SERIES CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

PART NUMBER DESCRIPTION WEIGHT

CMH01 Corner mount housing. 2.85kg

CMH02 Corner mount housing. 4.55kg

CMH02SS Polished stainless steel corner mount housing. 4.45kg

TSW CMH02 Tamper switch to suit all CMH02 models.

SPECIFICATIONS

ConstructionCMH01 & CMH02- 1.6mm zincanneal.CMH02SS- 1.6mm stainless steel.

FinishCMH01 & CMH02- Graphite ripple polyester powder coat.CMH02SS- Polished stainless steel.


Access3 x M6 post cap security screws.

Max. Camera SizeCMH02 & CMH02SS- 190mm. Maximum camera size isdependant on the angle of view required.

OPTIONS

All housings are supplied with adjustable camera mounts. Tamper switches are available for all models as an optional extra.


APPLICATIONS

Correctional services housings designed for indoor and outdoor yards.

Corner mount high security enclosures.

The CMH Series of corner mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues.

CMH01 & CMH02 enclosures are compact body corner mount enclosures taking up less space than triangular housings that enclose similar sized cameras. The CMH02WM (wall mount) model has been designed for this range to meet the demand for similar enclosures that mount to walls up against the ceiling. The CMH02SS is a polished stainless steel version of the standard enclosure, often selected for use in elevators and applications where the finish suits the environment.

The CMH01 is sized for compact cameras eg: Watec and Elmo whereas the CMH02 is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.

19

BCMH02WM

SPECIFICATIONS


FinishGraphite ripple polyester powder coat.



Cable Entry1 x 20mm opening on back panel.

Max. Camera Size190mm. Maximum camera size is dependant on the angle ofview required.

WeightCMH02WM- 4.85kg.

OPTIONS



APPLICATIONS

Correctional services housing for mounting against ceiling and wall.

Ceiling wall mount high security enclosure.

The CMH Series of corner mount and CMH02WM wall mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues.

The CMH02WM is a compact body ceiling wall mount enclosure taking up less space than triangular housings that enclose similar sized cameras. This product is designed to be wall mounted with the top positioned against the ceiling.

The CMH02WM is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.


CMH02WM Corner mount housing.

TSW CMH02 Tamper switch to suit all CMH02 models.

CMH02WM CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

20

BCMH02WP


CMH02WP Corner mount weatherproof housing.

TSWCMH02 Tamper switch to suit all CMH02 models.

SPECIFICATIONS






Max. Camera Size190mm. Maximum camera size is dependant on the angle ofview required.

WeightCMH02WP- 4.65kg.

OPTIONS



APPLICATIONS

Correctional services housing for mounting against ceiling and wall.

Corner mount high security enclosures.

The CMH02WP is a weatherproof enclosure designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues.

The CMH02WP is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.

CMH02WP CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

21

CCMH02WMWP

SPECIFICATIONS




Access12 x M6 countersunk post cap security screws.


Max. Camera Size190mm. Maximum camera length will be dependant on theangle of view required.

WeightCMH02WMWP- 4.6kg.

OPTIONS



APPLICATIONS

Weatherproof ceiling wall mount housing for correctional services applications.

Weatherproof ceiling wall mount high security enclosure.

The CMH Series of wall mount housings have been designed for Correctional centre applications. Featuring rugged construction, tamper resistance and with no centre projections the enclosures limit self harm issues.

The CMH02WMWP is designed to suit standard and larger camera and lens combinations such as Panasonic, Sony and Ikegami.


CMH02WMWP Wall mount weatherproof housing.

TSWCMH02 Tamper switch to suit all CMH02 models.

CMH02WMWP CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

22

ACMH03


CMH03 Corner mount housing.

TSW CMH03 Tamper switch to suit CMH03 model housing.

SPECIFICATIONS


FinishBlack texture polyester powder coat.



Cable EntryOpening on back panel.

Max. Camera SizeFor PCB cameras only.

WeightCMH03- 0.7kg.

OPTIONS

All Correctional Services housings are supplied with adjustable camera mounts. Tamper switches are available as an optional extra.


APPLICATIONS

Corner mount housing for Correctional Services applications.

Corner mount high security enclosure.

The CMH03 is designed for Correctional Centre applications. Featuring rugged constuction, tamper resistance and with no center projections, the enclosure limits self harm issues.

CMH03 is a compact body corner mount enclosure, taking up less space than the triangular housings. The enclosure features increased lens angles that allow wide angle lenses to view directly below the housing. The CMH03 is suitable for 3 x 3m as well as larger rectangular holding cells.

This housing is designed to suit standard and larger cmaera and lens combinations such as Panasonic, Sony and Ikegami.

CMH03 CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

23

CCMSW01


CMSW01 Wall mount housing for PCB cameras.

SPECIFICATIONS





Cable EntryOpening on back panel.

Max. Camera SizeFor PCB cameras only.

WeightCMSW01- 0.7kg.

APPLICATIONS

Wall and ceiling mount housing for correctional services applications.


Wall mount high security enclosures for PCB cameras.

The CMSW01 enclosure suits Correctional services and police stations. The CMSW01 wall ceiling mount has been designed for along walls at the junction with the ceiling.

Sized to suit a range of PCB cameras, the CMSW01 is supplied without a camera mount bracket due to the range of PCB cameras available.

Brackets are available for a limited number of current cameras. We suggest you fax or email details of your camera when ordering.

CMSW01 CORRECTIONAL SERVICESHOUSINGS

CO

RR

EC

TIO

NA

LS

ER

VIC

ES

24

BSMW5SS

ASMW5

SMW5 WEDGE HOUSINGS

SPECIFICATIONS

ConstructionSMW5- 2.5mm zinc plated powder coated mild steel.SMW5SS- 2.0mm 304 grade stainless steel.

FinishSMW5- Mossvale sands (light beige) polyester powder coat.SMW5SS- White polyester powder coat.


Access4 x 6.0mm stainless steel security screws plus one Selectrix coinkeylock as standard. Optional bi-lock high security key lock.

Cable Entry2 x 20mm entries.


WeightSMW5- 6.4kg.SMW5SS- 5.15kg.

OPTIONS

Omron tamper switch and mercury vibration switch are available as options. Fixed angle pole top adaptor, heater, high security locking system (bi-lock)and wall bracket are available mounting accessories.


APPLICATIONS

Car parks, under eaves, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.

Weatherproof surface mount wedge housing. IP66 Outdoor wedge housings for high security applications where corrosion resistanceand mechanical strength are required.

Manufactured from powder coated zinc plated steel the SMW5 offers a single keylock and dual captive security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit.

There are three modules available in this range, the SMW5 surface mount, the SMW5PMPT pan tilt pole top and the SMW5PM pole top.

The SMW5 has a range of camera adjustments. It is an attractive enclosure that suits a variety of mounting applications for larger camera and lens combinations. It is also weatherproof and highly vandal, corrosive and tamper resistant.


SMW5 Surface mount weatherproof zinc plated mild steel housing.

SMW5SS Surface mount waterproof stainless steel wedge housing.

HTR Heater thermostat to suit all SMW5 housings.

TSW SMW5 Tamper switch to suit all SMW5 housings.

BILOCK High security locking system to suit all SMW5 housings.

WE

DG

E H

OU

SIN

G

25

BSMW5PM

CSMW5PMSS

SMW5PM WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G


SMW5PM Fixed tilt weatherproof pole top wedge housing to suit 76.1mmmaximum pole diameter.

SMW5PMSS Fixed tilt weatherproof pole top wedge housing to suit 76.1mmmaximum pole diameter. Stainless steel construction.




SPECIFICATIONS

ConstructionSMW5PM- 2.5mm zinc plated steel.SMW5PMSS- 2.0mm 304 grade stainless steel.

FinishSMW5PM- Mossvale sands (light beige) polyester powder coat.SMW5PMSS- White polyester powder coat.





WeightSMW5PM- 8.6kg.SMW5PMSS- 7.1kg.

OPTIONS

Omron tamper switch and mercury vibration switch are available as an option. Fixed angle pole top adaptor, heater high security locking system (bi-lock), wall bracket.


APPLICATIONS

Car parks, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.

Weatherproof pole and wall mount wedge housings. IP66 Outdoor wedge housings for high security applications where corrosion resistance and mechanical strength are required.

The SMW5PM & SMW5PMSS are manufactured from either powder coated zinc plated steel or stainless steel. The pole mounted enclosure allows the angled face of the bracket to offer additional downward tilt for closer, tighter angles of view.

The SMW5PM & SMW5PMSS are attractive, weatherproof enclosures which are also highly vandal, corrosive and tamper resistant.

26

CSMW5PMPTSS

CSMW5PMPT

SMW5PMPT WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G

SPECIFICATIONS

ConstructionSMW5PMPT- 2.5mm zinc plated steelSMW5PMPTSS- 2.0mm 216 grade stainless steel.

FinishSMW5PMPT- Mossvale sands (light beige) polyester powder coat.SMW5PMPTSS- White polyester powder coat.





WeightSMW5PMPT- 8.44kg.SMW5PMPTSS- 7.40kg.

OPTIONS

Omron tamper switch and mercury vibration switch are available as an option. Fixed angle pole top adaptor, heater high security locking system (bi-lock), wall bracket.


APPLICATIONS

Car parks, under eaves, railway platforms, tunnels, pole mount, wall mount and walkways. Ideal weatherproof general purpose enclosure.

Weatherproof pole and wall mount wedge housings. IP66 Outdoor wedge housings for high security applications where corrosion resistance and mechanical strength are required.

The SMW5PMPT & SMW5PMPTSS are attractive, weatherproof enclosures constructed from either powder coated zinc plated steel or stainless steel. The housings pan tilt feature allows for a wide range of camera adjustments for different angles of view.

The enclosures are also highly vandal, corrosive and tamper resistant.


SMW5PMPT Adjustable pan & tilt weatherproof pole top wedge housing to suit76.1mm maximum pole diameter.

SMW5PMPTSS Adjustable pan & tilt weatherproof pole top housing to suit 76.1mmmaximum pole diameter. Stainless steel construction.




27

CRMW5

CRMW5SS

RMW5 WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G


RMW5 Zinc plated steel recessed mount wedge housing.

RMW5SS Stainless steel recessed mount wedge housing.

SPECIFICATIONS

ConstructionRMW5- 2.5mm zinc plated steel body and 2.0mm stainless steel base.RMW5SS- 2.0mm 304 grade stainless steel and 2.0mm stainlesssteel base.






WeightRMW5- 9.55kg.RMW5SS- 8.0kg.

OPTIONS

Recess mount only.


APPLICATIONS

Corridors, entrances and lower height applications where dome enclosures may prove to be vulnerable to attack.

Recess mounted wedge housing.

Interior recess mounted wedge housing for ceiling mount applications where vandalism is likely.

The RMW5 is manufactured from powder coated zinc plated steel while the RMW5SS is the stainless steel alternative. The enclosure offers a single keylock and dual captive security screw access. The RMW5 & RMW5SS are large attractive housings that are weatherproof and highly vandal, corrosive and tamper resistant.

The key features of the RMW5 are the range of camera adjustments and the inbuilt ceiling fastening system. Ceiling cutout dimensions measure at 212mm (W) x 380mm (L).

28

ARMW2

RMW2WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G

29

SPECIFICATIONS


FinishMossvale sands (light beige) polyester powder coat lid and blacktexture base.


Access1 x 6mm stainless steel security screw.

Cable Entry4 x 20mm entries, two at the rear, one in each side and onepositioned at the top rear.


WeightRMW2- 1.9kg.

OPTIONS

Omron tamper switch is available as an option.


APPLICATIONS

Corridors, entrances and lower height applications where dome enclosures may prove to be vulnerable to attack.

Recess mounted wedge housing.

Interior recess mounted wedge housing for ceiling mount applications where vandalism is likely.

While being smaller than the RMWH that it replaced, the RMW2 offers a single security screw access and far easier camera access and adjustment.

The key features of the RMW2 are the range of camera adjustments and the inbuilt ceiling fastening system.


RMW2 Recessed mount wedge housing.

ASMW1

SMW1 WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G


SMW1 Large surface mount wedge housing.

SPECIFICATIONS

FinishWhite polyester powder coat.



Cable Entry5 x 20mm entries, two at the rear, one in each side and one positioned at the top rear.


WeightSMW1- 2.9kg.

APPLICATIONS

Car parks, under eaves, railway platforms, tunnels, walls and walkways. An ideal general purpose enclosure for larger camera and lens combinations.


Suface mount wedge housing.

Wedge housing for larger camera and lens combinations.

The SMW1 offers dual security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit.

The enclosure has incorporated a multiposition camera mount bracket similar to the SMW5 with full access to one side of the camera. It is a general purpose wedge that suits a variety of mounting applications for larger camera and lens combinations.

30

ASMW2

SMW2 WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G

31


SMW2 Compact surface mount wedge housing.

SPECIFICATIONS






WeightSMW2- 2.05kg.

OPTIONS

Omron tamper switch available as an option.


APPLICATIONS

Car parks, under eaves, railway platforms, tunnels and walkways. A general purpose enclosure for small to medium camera and lens combinations.

Surface mounted wedge housing.

Wedge housing for small to medium sized camera and lens combinations.

The SMW2 offers a single security screw access and the option of surface run conduit to enter the enclosure directly without the conversion to flexible conduit.

The key features of the SMW2 are the range of camera adjustments in an attractive low profile enclosure.

ASMW3

WE

DG

E H

OU

SIN

GSMW3 WEDGE HOUSINGS

WE

DG

E H

OU

SIN

G

SPECIFICATIONS


FinishMossvale sands (light beige) polyester powder coat lid and blacktexture base.



Cable Entry4 x 20mm entries, two at the rear, one in each side and onepositioned at the top rear.


WeightSMW3- 4.3kg.

OPTIONS

Omron tamper switch and adjustable mercury vibration switch available as options.


APPLICATIONS

Car parks, under eaves, railway platforms, tunnels, walls and walkways. An ideal general purpose enclosure for larger camera and lens combinations.

Surface mounted wedge housing.

Wedge housing for larger camera and lens combinations with optional wall mount bracket, tamper and vibration switch.

The SMW3 offers a single security screw access and the option of surface run conduit to enter the enclosure directly without conversion to flexible conduit.

The SMW3 has a range of camera adjustments. It is an attractive enclosure that suits a variety of mounting applications for larger camera and lens combinations.


SMW3 Recessed mount wedge housing.

TSW SMW3 Tamper switch to suit SMW3 housings.

32

BERC6-700

BERC6-500

RA

CK E

NC

LO

SU

RE

S

33


ERC6-500SD 6RU, 505mm deep steel rack enclosure with steel door.

ERC6-500AD 6RU, 505mm deep steel rack enclosure with steel framed acrylic door.

ERC6-700SD 6RU, 705mm deep steel rack enclosure with steel door.

ERC6-700AD 6RU, 505mm deep steel rack enclosure with steel framed acrylic door.

SR1FK 240VAC 110mm ventilation fan with plug and lead.

ERC6 RACK ENCLOSURES

SPECIFICATIONS

Dimensions ERC6-500- 552mm(W) x 505mm(D) x 340mm(H).ERC6-700- 552mm(W) x 705mm(D) x 340mm(H).

Mounting DepthERC6-500- Maximum equipment mounting depth of 445mm.ERC6-700- Maximum equipment mounting depth of 645mm.

FinishGraphite ripple polyester powder coat. Standard Inclusions Rear fan mount panel, front and rear rack rails.

OPTIONS

240VAC ventilation fan an optional extra.


APPLICATIONS

Secure mounting of DVR’s UPS and electronic switching equipment.

Bench mount steel enclosure for DVR and electronic switching equipment.

The ERC6 range features front and rear rack rails for mounting heavier equipment such as UPS cases. The rear panel provides an optional 110mm fan mount and the advantage to remove the panel without disconnecting cables from the internal equipment.

The new ERC6 design offers improved levels of security through recess mount front door and concealed hinges. Heat dissapation has been upgraded by the inclusion of additional ventilation in the cabinet base.

MOUNTS

Aluminium and stainlesssteel wall mount

brackets for dome housings.

Various sized pole andcorner mount adaptors.

Dropper Kits for Internaland External dome

housings.

Wall mount brackets forthe Environmental

series housings.

Extended wall mountbrackets for Internal and

External dome housings.

Pole mounts and manual pan tilts for use with Environmental and Wedge series housings.

34

Part No. AMONAdaptor to attach monitor

mount frames to above dropper kits (3/8” bolt)

Part No. ASASSAdaptor to attachSA220 & SS220Dome Housings

Part No. ARMAdaptor to attach RMDH

seriesdomes to abovedropper kits (20mm nipple)

FPM3000COL fitsdirectly to SP300 &SP300D internal domes

3000mm long dropper28.6mm diameterPart No. LP30

APM31500 & 3000 fitdirectly to SP300 &SP300D internal domes

Lower pole 28.6mmdiameter. Part No. 3000mm: LP301500mm: LP15

Upper pole 31.8mmdiameter. Part No. 3000mm: UP301500mm:UP15

OPTIONALDecorative coverPart No. DCOVERW

Roof mount platePart No. RMP


FPM3000COL APM1500 & 3000

RMDH SA220 & SS220 MONITOR MOUNTTRAYS

SP300 & SP300D

OPTIONALDecorative coverPart No. DCOVERW

No mounting adaptor required as SP300 fits

directly to dropper kits.

DROPPER KITS

35

AMPM1500 & 3000 fitdirectly to SP300 &SP300D internal domes

FPM3000COL fitdirectly to SP300 &SP300D internal domes

3000mm long dropper28.6mm diameterPart No. LP30

OPTIONAL Decorative cover Part No. DCOVERW



OPTIONAL Decorative cover Part No. DCOVERW

Upper pole 31.8mmdiameter. Part No.3000mm- UP301500mm- UP15

Lower pole 28.6mmdiameter. Part No.3000mm- LP301500mm- LP15

Part No. ARMAdaptor to attch RMDH

series dome to above dropper kits (20mm nipple)

Part No. ASASSAdaptor to attach

SA220 & SS220dome housings

Part No. AMONAdaptor to attach monitor

mount frames to abovedropper kits (3/8” bolt)

No mounting adaptorrequired as SP300 fits

directly to dropper kits

MOUNTING GUIDES

ENVIRONMENTAL HOUSINGS

36

MOUNTING GUIDES

DOME HOUSINGS

37

Description Part Number

Zinc plated, powder coated mild steel wall mount bracket. Standard in MVS*.

WM125

Powder coated stainless steel wall mount bracket. Standard in white.

WM125SS

Powder coated mild steel wall mount bracket. Standard in black.

SMWB3

Powder coated stainless steel wall mount bracket. Standard in black.

SSWB3

Compact wall mount bracket for SA220 & SS220. Stainless steel, standard in black.

SSWB

Aluminium powder coated wall mount bracket. Standard in black.

SAWB

Extended wall bracket for SA220 & SS220 housings. Powder coated stainless steel, standard in black.

SSEWB

Stainless steel pendant mount to suit SA220 & SS220 housings. Standard in black.

SSPENA

300mm ceiling mount fixed pendant dropper in 1.6mm tube and 3.0mm plate. Standard in black.

SMPM300

3000mm fixed dropper in 1.2mm tubeand mounting base. Standard in white.

FPM300COL

Adjustable dropper 1500mm to 2700mm in 1.2mm & 1.6mm tube. Standard in white.

APM1500

Adjustable dropper 3000mm to 5500mm in 1.2mm & 1.6mm tube. Standard in white.

APM3000

3000mm fixed dropper extension. Standard in white.

FROD300D

Adaptor to attach RMDH frames to FPM& APM droppers. Standard in black.

ARM

Adaptor to attach monitor mountingframes to FPM & APM droppers.Standard in black.

AMON

250mm aluminium liner with viewing slot. Standard in black.

RM LINER


RM180 LINER


RM300 LINER

Stainless steel recessed mount adaptorfor RMW2 and RMW5. Standard in MVS*.

RMA5

Fixed pole mount in 2.5mm zincanneal mild steel for SMW5. Standard in MVS*.

FPM5

ACCESSORIES

38

Part Number Description

ASASS Stainless steel adaptor to attach SA220 & SS220 to FPM & APM droppers. Standard in white.

HDWMB2 Stainless steel wall mount bracket to suit ECO & LPAR400 housings only. Powder coated in MVS*.

HDWMB3 Extended wall mount bracket to suit LPAR housings and pan tilt drivers. Powder coated stainless steel, standard in MVS*.

MPT2 Manual pan tilt bracket manufacturedfrom powder coated zinc anneal. Standard in white.

HDMPT2 Stainless steel manual pan tilt to suit LPAR housings with 101.6mm OCD 4 bolt mounts. Powder coated standard in MVS*.

PMA2 Pole mount adaptor in powder coatedstainless steel (minimum pole size is 90mm diameter). Standard in MVS*.

CMA Stainless steel corner mount adaptor.Standard in MVS*.

SMA Surface mount adaptor in 1.6mm zincplated mild steel. Standard in black.

HSWMB Stainless steel high security cable through wall mount bracket suitable for ECO & LPAR series housings. Standard in MVS*.

HSMPT High security cable through pan tilt bracket in stainless steel. Suitable for ECO & LPAR series housings. Standard in MVS*.

WMB Wall mount bracket for ECO andenvironmental housings. Powder coated zincanneal construction. Standard in MVS*.

D COVER Decorative cover in 1.2mm aluminium.Standard in white.

RMP Roof mount plate in 1.6mm zincannealmild steel. Standard in black.

WM3 Wall mount bracket to suit SMW3 housing in 1.6mm zinc anneal mild steel. Standard in MVS*.

LPWB2 Powder coated Zincanneal wall mountbracket. Standard in white.

HDWMB Extended wall mount bracket forEnvironmental housings. Powder coated stainless steel standard in MVS*.

HDWMB3 Extended wall mount bracket for LPARseries housings. Powder coated stainless steel standard in MVS*.

PMPT5 Stainless steel pole mounted pan tilt forSMW5 range housings. Standard in white.

ACCESSORIES

39

DIMENSIONS

ENVIRONMENTAL HOUSINGS

40

ECO& ECOSS LPAR400 & LPAR400SS

LPAR480 LPAR600

EXTERNAL DOME HOUSINGS

DIMENSIONS

41

RMDHWP & (RMDHWP300) SA220 & SS220

LP235 LP300

INTERNAL DOME HOUSINGS

DIMENSIONS

42

SP300 & SP300D RMDH & (RMDH300)

CMDH RM150 & (RM180)

CORRECTIONAL SERVICES HOUSINGS

DIMENSIONS

43

278

242

250

CMH01 & (CMH02 & CMH02SS) CMH02WM

CMH02WP CMH02WMWP

CMH03 CMSW01

WEDGE HOUSINGS

DIMENSIONS

44

SMW5 & SMW5SS SMW5PM & SMW5PMSS

SMW5PMPT & SMW5PMPTSS RMW5 & RMW5SS

WEDGE HOUSINGS

DIMENSIONS

45

161

166

345

SMW2 SMW3

RMW2 SMW1

RACK ENCLOSURES

DIMENSIONS

46

ERC6-500503mm549mm

320m

m

703mm549mm

320m

m

ERC6-700

MOUNT PLATES

47

ConstructionMild steel, 2.0mm.


Compatible HousingsComes standard with ECO housing.

Construction6.0mm plate & tube.

FinishZinc plated Mossvale sands (light beige) polyesterpowder coat.

Compatible HousingsSMW5PM, SMW5PMSS, SMW5PMPT & SMW5PMPTSS.

48

MOUNT PLATES

ConstructionStainless steel, 3.0mm & 1.6mm.


Compatible HousingsECO & LPAR Series.

ConstructionMild steel 1.6mm.


Compatible HousingsLP300.

49

MOUNT PLATES

ConstructionMild steel 1.2mm.

FinishWhite polyester powder coat.

Compatible HousingsLP235.

ConstructionStainless steel 1.6mm.


Compatible HousingsSA220, SS220, PTZ, AXIS & RS550.

50

INDEX

CMDHCMH01CMH02 & CMH02SSCMH02WMCMH02WMWPCMH02WPCMH03CMSW01Correctional Services Housing DimensionsDome Housing Mounting GuideDropper KitsECO & ECOSSEnvironmental Housing DimensionsEnvironmental Housing Mounting GuideERC6External Dome Housing DimensionsInternal Dome Housing DimensionsLPAR400 & LPAR400SSLPAR480LPAR600LP235LP300Mounting PlatesRack Enclosure DimensionsRMDH & RMDH300RMDHWP & RMDHWP300RM150RM180RMW2RMW5 & RMW5SSSA220SMW1SMW2SMW3SMW5 & SMW5SSSMW5PM & SMW5PMSSSMW5PMPT & SMW5PMPTSSSS220TH SeriesWedge Housing Dimensions

16191920222123244337354403633414256791047461381415292811303132252627121844

see security is an australian owned and operated · see security is an australian owned and...

Documents