SECURITY FENCING & GATES

GATES FENCING FIXED LOUVER

Visit our Web Site www.ametco.comfor Master Spec • CAD Drawings • Photo Gallery

32 31 00/AMRBuyLine 7407

SECURITYFENCING & GATES

In the interest of improving quality and design, AMETCO reserves the right to amend specifications without giving prior notice.

Metro design used at California shopping mall Lattice design used at Florida condo entrance

All products shown in this catalog are manufactured in Willoughby, Ohio from steel produced in the USA

WARRANTYThe American Hot Dip Galvanizers Association, Inc. states,“The life expectancy of galvanized coatings on typicalstructural members is far in excess of 50 years in mostrural environments, and 20 to 25 years plus, even insevere urban and coastal exposure.”

The warranty for the powder coated finish is 10 years.The polyester coated galvanized metal will remaincorrosion free for years. Performance properties of thepolyester coat ing are as fol lows. SALT SPRAYRESISTANCE: (ASTM B-117) Bonderite 1000 steel panels,in a scored condition, exhibit no undercutting after 500hours in 5% salt spray testing at 95 degrees F and 95%relative humidity. No rusting or blistering on panel face.Under the same conditions after 1000 hours the panelsshowed less than ³/₁₆" undercutting.

WEATHERABILITY: (ASTM D822) After one yearexposure in South Florida with panels facing south andtilted at a 45 degree angle, a high gloss white polyestercoating retains 88% of its gloss (gloss readings obtainedon washed panels). No film failure.

A 2-part polyurethane coat on top of hot dip galvanizedis used when gates are too large to be powder coated.Ametco Mfg. Corp. certifies that its fencing systems arefree from defects in material and workmanship. Thepolyester coated fencing is guaranteed not to crack, peelor blister for a period of 10 years. Accidental damages,defects resulting from improper installation and damagefrom vandalism or abuse are not included. Warranty islimited to a prorated value of the coating, not to exceed theoriginal value of the coating. Or, at Ametco’s discretion, re-coating the panel but not to include labor for removal orreinstallation.

BUILT TO LASTThe Ametco fencing system is an exclusive system, analternative approach to fencing design, the concept ofwhich is both functional and decorative. The Ametco fencingsystem is ideally suited to harmonize with any environment.This fencing system has been created through advancedtechniques by Ametco Mfg. Corp., a company whosedynamic approach and flair in metal fabrication have nowconceived this unique system, which has revolutionized thetraditional fencing image and extended the range ofapplications throughout the private and industrial buildingindustries. Ametco fencing system is manufactured usingthe electro-forged welding process, giving completepenetration of the cross member. Ametco Mfg. Corp. hasdeveloped a highly desirable fencing product which fitsperfectly into modern architectural and security applications.

LASTING COLORSAmetco fencing is protected by extremely effective coatingsystems, giving long life with a touch of elegance. The hotdip galvanized finish with a polyester powder coating givesAmetco fencing protection from the elements, as well asincreasing its sturdiness and eliminating maintenance. Thissystem gives the best corrosion protection in the industry.The hot dip galvanizing will leave rough areas on the treatedsurface. These rough areas do not impair the coating interms of corrosion resistance. The galvanized product isthen powder coated. The color gives an “extra” touch ofappeal to the fencing, harmonizing with its surroundings.Once you have selected the color from the wide choicesavailable, it will endure exposure without crazing or fading.For jobs where a smooth surface is required, see Ametco’sfixed louver aluminum or stainless steel product.

ApplicationsThe simple clean lines of this type offencing means that it can be used for avast range of applications. The closecenters makes this design practicallyunclimbable.

GROTTO1 ²¹/₃₂" x 5 ³/₁₆" MESH

1" x ³�₁₆"

5³�₁₆"

1²¹�₃₂"

⁷�₁₆ x 1"

³¹�₃₂" x ⁵⁄₆₄"

ApplicationsThe small square opening makes thisdesign ideal for railing infill panels—window guards—and any applicationwhere control of the opening size isneeded.

SHIELD1²¹/₃₂" x 1³/₄" MESH

1³�₄"

1²¹�₃₂"

³¹�₃₂" ✕ ⁵�₆₄"

1" x ³�₁₆"

⁷�₁₆ x 1"

®

®

� ⁵�₃₂"

� ⁵�₃₂"

32 31 00/AMRBuyLine 7407

ApplicationsThe simple, clean lines of this type offencing means that it can be used for avast range of applications. It is particu-larly suitable for both prestige and highsecurity applications including residential,sports, leisure, industrial and military.

METRO2 ⁷/₁₆" x 5³/₁₆" MESH

5³�₁₆"

2⁷�₁₆"³¹�₃₂" ✕ ¹�₈"

�³�₁₆"

1" x ³�₁₆"

⁷�₁₆ x 1"

ApplicationsWhere safety, strength and anti-break-incharacteristics are required: militarydeposits or installations, repeaters, radarstations, petrochemical installations;preferably to be fitted with burglar-proofuprights and safety bolts. Can be fittedwith alarm devices.

BLOCKADE2⁷/₁₆" x 5³/₁₆" MESH

5³�₁₆"

2⁷�₁₆"1³�₁₆" ✕ ⁵�₃₂"

�¹�₄"

1³�₁₆" ✕ 5³�₁₆"

⁷�₁₆ x 1"

®

®

ApplicationsGreat versatility for both civil andindustrial use and especially suitable forrailings and internal decoration.

LATTICE2⁷/₁₆" x 2¹⁹/₃₂" MESH

2¹⁹�₃₂"

2⁷�₁₆"

³¹�₃₂" ✕ ¹�₈"

�³�₁₆"

1" x ³�₁₆"

⁷�₁₆ x 1"

ApplicationsThe Stadium model is suggested foreconomy in large areas and the internalsub-division of areas already fenced, forthe three sides of outer fencing whichare not seen, internal decoration, specialapplications and false ceilings.

STADIUM3¹⁵/₁₆" x 3¹⁵/₁₆" MESH

3¹⁵�₁₆"

3¹⁵�₁₆"

³¹�₃₂" ✕ ¹�₈"

1" x ³�₁₆"

⁷�₁₆ x 1"

�³�₁₆"

®

32 31 00/AMRBuyLine 7407

ARCHITECTURAL FENCING TRADE NAMESPRODUCT AMETCO® ORSOGRIL®

2⁷/₁₆" x 5³/₁₆" Mesh with 1" x ¹/₈" Main Bar METRO®

STEROPE

2⁷/₁₆" x 5³/₁₆" Mesh with 1³/₁₆" x ⁵/₃₂" Main Bar BLOCKADE®

BRITOSTEROPE

2⁷/₁₆" x 2¹⁹/₃₂" Mesh with 1" x ¹/₈" Main Bar LATTICE PLEIONE

3¹⁵/₁₆" x 3¹⁵/₁₆" Mesh with 1" x ¹/₈" Main Bar STADIUM®

1²¹/₃₂" x 5³/₁₆" Mesh with 1" x ¹/₈" Main Bar GROTTO®

DANAE

1²¹/₃₂" x 1³/₄" Mesh with 1" x ⁵/₆₄" Main Bar SHIELD®

DIONE

4⁷/₈" x 5³/₁₆" Mesh with 1" x ¹/₈" Main Bar TRELLIS®

ALCIONE

1¹³/₁₆" x 5⁷/₃₂" Mesh – 80% Direct Visual Screening SHADOW®

80 TALIA

1¹³/₁₆" x 5⁷/₃₂" Mesh – 100% Direct Visual Screening SHADOW®

100 TALIA 100

ORSOGRIL is a registered Trade name of ORSOGRIL SPA

Contact AMETCO for our full range of product literature covering FIXED LOUVER FENCING,ALUMINUM FENCING, WELDED WIRE FENCING, SECURITY GATES, RAILING, SUNSHADE,LOUVERS, PERFORATED METAL & PLASTIC, ARCHITECTURAL GRILLES & SCREENS.

ApplicationsThe Trellis model is suggested foreconomy in large areas and the internalsub-division of areas already fenced, forthe three sides of outer fencing whichare not seen, internal decoration, specialapplications and false ceilings.

TRELLIS4⁷/₈" x 5³/₁₆" MESH

³¹�₃₂" x ¹�₈"

1" x ³�₁₆"

⁷�₁₆ x 1"

5³�₁₆"

4⁷�₈"

�³�₁₆"

®

HORIZONTAL APPLICATION (May Be Used Vertically)

100%80%

DIRECT VISUAL SCREENING

³�₈"Gap No

Gap

H Panel Height Up to 144" High

8" Up to 60" HighH1 Anchor Length* 10" Up to 80" High

12" Up to 96" High18" Over 96" High

I Post Width 64-31/32" Maximum

L Panel Width 64-21/32" Maximum

M Width of Grille 64-21/32" Max Horiz62-3/8" Max Vert

G Lug Projection 1-5/32" Maximum

2-1/2" X 5/16" Flat bar up to 60" High

Post Size* 3-1/2" X 5/16" Flat bar up to 96" High

2" X 2" Square tube over 96" High

*Final Determination of anchor length and postsize is based on panel size, site conditions anddesign consideration

CharacteristicsModel with inclined sections, exclusivepolished design, without cuts or jointsand therefore monolithic. It can beinstalled with horizontal sections, inwhich case it is practically peep-proof, orwith vertical sections, thus allowing areduced side visibility only.

ApplicationsSuitable for use on balconies, assunscreens, protective screens, falseceilings, ventilation openings, parkinggarages and special applications.

Specify:Electro-forge welded steel fencing.Ametco Shadow design horizontal orvertical—1³¹/₃₂" x ¹/₁₆" formed main bar,⁵/₃₂" round cross bar, 1¹³/₁₆" x 5⁷/₃₂" mesh.Galvanized to ASTM 123 and/or powderpolyester coated. The Shadow designweight is 2.84 lbs. per Sq. Ft.

SHADOW

³¹�₃₂" x ¹³�₃₂" x ³�₃₂"

¹�₄" x 1³�₄"

� ⁵�₃₂"

1¹³�₁₆�

®32 31 00/AMRBuyLine 7407

INSTALLATIONThe Ametco system is simplicity itself.Standard panels are merely bolted to theuprights which are anchored conventionally.The modular design means it can be erectedin a fraction of the time of most other rigidfences and allows easy replacement of anypanels damaged. The ease of assemblycoupled with strength and long-life makeAmetco fencing one of the most cost-effective fencing.

Anti-Intruder PostsComplete with extension arm to carry 3galvanized barbed wires and 3 holes forelectrified wires. Anti-intruder posts areavailable for panels 83 ³/₈" and 99" highExtension Arm Dimensions.11³/₄" x 2 ³/₈" x ⁵/₁₆"

Standard BoltsStainless Steel AISI 304Bolt Dimensions = ³/₈" x 2"

Available colored coatingsSEE PAGE 2.

Safety OrangeCharlie Brown

Light Blue Safety Yellow

Light Ivory Black Velvet

Moss Green Red Baron

White Cal Gray

Silver

Blue Streak

Pale Green

Bronze Mat

Cream

4326 Hamann ParkwayP.O. Box 1210

Willoughby, Ohio 44096Web Site www.ametco.com

Phone (440) 951-4300Fax (440) 951-2542

Toll Free 800-362-1360E-Mail ametco@ametco.com

Visit our Web Site www.ametco.comfor Master Spec • CAD Drawings • Photo Gallery

Custom colors available at an additional charge.Note: The reprint of the color chart may vary from actual finish color.

SECURITY NUTfor Thru-Bolt Application

SECURITY BOLTfor Post Application

POST

Ametco’s security bolts and nutsThe hexagon nut will shear off from the cup head when theAmetco Security Bolt or Nut is tightened to the correct torque,rendering the bolt or nut nearly impossible to release.