·1·

Preamble

This manual is for understanding how to use fingerprint device for users,which is a device with color screen and access controller, as well has attractive prospect . This is device of fingerprint identification. You could download data by linking to fingerprint device, as well select download by off-line, desides, you also use for operation and administrate of full functional time zone.

fingerprint device separately has fundamental form ,and advancedform ,which has the function of disposing with camera. Installation

Normally , we often install it on indoor wall ,because of avoiding strong sunshine to harm fingerprint sensor.

Normally , we install device on wall with high of 1.4 meters.

1.4m

Fingerprint device

Fingerprint device has metal trestle on back, use for installing it on

wall.

metal trestle

use screw to install device frame on wall.

Making fingerprint device to be fixed on deivce frame.

·2·

connection methods of electric lock

method One:

connection methods of Anti-robbery bell

·3·

menu construction as follow below:

user administration

fingerprint register

RF card registerpassword registeroriginal sound transcribedphotograph image

device setup

basic setupadvanced setuppower managementcommunication setupalarm setupsetup of access controlfunction of self-checking

U disk management

download confirmation record

download administration records

download user Infoupload user Infoupload messager notificationMP3 upload Mp3

data checkingsystem infodevice infoadvanced checkupalarm restoration

startu p screenafter starting up fingerprint device, symbol will be showed a while, which means device is working now.

Device screen on standing by ready will be displayed as below, which will display current date and time. The clock is placed on left. If you already set up the function of "setup of spare time inside " power management' , it will run this function at specified time.

·4·

If machine leave unused specified time, this function will be started up.Under the function of free time, you also press fingerprint or menu button to operate different menu function.

user administrationunder user administration , you also could add one new user or delete existing users.

each user has own job No, as you add new user, firstly need to input job NO. it will display unused job No on dvice, if you accept it , only need you to press "confirmation".If you want to use other job No, you also can input appointed Number by pressing figure keys. 0 in front of Number no need to press, if you want to input 27, only need press button "2 and 7'.after that , you need to select inspection register. You can select fingerprint, card or password.If you select fingerprint, need to register fingerprint for three times. the dvice will store best gingerprint template as best standard data.If you select card, need to brush card , making device automatically read card No.

if you select password, need to input you appointed password on figure key.

If need to delete user, you only input job No of user to be deleted.assume existing staff No and staff name, we want to register job No of user and related data, can refer to below methods:

job No of user staff No name

1

2

3

4

MIS001

ACC001

MIS002

SAL001

John

Mary

Peter

Susan

deviuce setup

device seup is divided into 7 branch menu, such as basic seup, advanced setup, power management, communication setup, record setup, setup of access control and function of self-checking. Every branch menu has different parameter to set up project list among menu. Using left, right , up, down arrows to enter into different menu.

·5·

basic seupbasic stup is basic seup of device, which includes time setup ,language setup, voice prompt, volume adjustment, keypad tone. time setup

time setup is setting up time on fingerprint device, if long time not to connect computer , after processing data, the device might not be inaccurate. You could use menu to correct time, also use Unionattend software to synchronize their time. When you download data each time, it will automatically synchronize time. language setupyou also could set device's language, allow it as English , Chinese trad and Chinese simplified. We also can change the language for customer, such thailand or spanish etc.

Voice promptvoice prompt device will speak" Thank you" to you when you press fingerprint or brush card. If fingerprint hasn't yet registered or identified failure, this device will speak" "identification failure". if you closed this function , this device won't speak up. As press fingerprint, device will give 3 short buzzing. if identify failure, it will sound long , and screen will display failure,because this sound chip only can store one kind of sound language. So , before leaving factory, customer need to select appointed sound language.

Volume adjustment

Which adjust sound volume as you set the startup function .

Keypad tone

which means whether buzzer has prompt voice as press button down. Advanced setup

beforehand setup changes important parameter of device installation. If this deive has administrator, whom only can operate menu function, which includes verified pattern,inspect port, and functional key setup of beach menu, as well as setup of day-light saving time,firmware upgrade,recover tacit setup of leaving factory, and delete all attendance and registered data etc. Tacitly verifying method

which is setting tacit inspected pattern, you might select fingerprint.

fingerprint

card + fingerprint

Job No + fingerprint

Job No + password

Fingerprint + password

card + password

job No + fingerprint that means pass with identification through both job No and fingerprint.

·6·

Checking boundary seup

This menu function and fingerprint photograph are need to select whether real time display or take photo.

Setup of real time photograph

if choose this function , we need input photo's percent ,fingerprint, card and passoword etc.

real time image caught

fingerprint photo

card photo

PIN photoelectricity

display photo

which means that after successful identification, devive will display photo to select.

delete all records

which means that delete all data inside device. beofre delete them , you are need to confirm again to make sure to delete the data.

delete all registered data.which means that all registered data inside device will be deleted.

recover setup of leaving factory

which recover tacit setup of device as leavinf factory, this function won't affect existing data, and registered records, meanwhile, you are also required again to confirm. system upgrade

System upgrade is upgraded by U disk. When we have new function to add or debug current firmware, we can use this method to upgrade.

setup of dayligh-saving time

This setup is for countries with daylight-saving time. You might make device come back normal time after setting up of begining time and closing time.

setup of functional key

the functional key have four different selections ( F1 to F4). tacit setup as

F1 =on duty F2 =off duty F3 =time over working F4 = plus exit

you might change setup, for instance, might change motorcade info to check , or change F2 to doorbell function.ail setup list, adjust the function standing for start this job by appointed time. The list of menu such as start up, closed, appointed dormancy, ringdown setup, spare time setup and closed shutdown.

·7·

Automatically starting up

as open it at appointed time, device must be sleeping pattern beofre opening it. for instance, you might set the automatically start up device on 07:00.

Automatically shutdown

Automatical close and open is adverse functio , which is also preinstalled for the automatical shutdown time.After using this function , you might press power button or set device as automatical startup. As you start this function , device with sleeping condition. Ringdown setup

you could set clock sound as 8 times. you also set ringdown music and ringdown time-long. this device will output interior speaker and exterior ring-clock.

Setup of spare time

this function is aimed at setting spare time and start up other function. this function is given tacit consent to shutdown. If you set its function as one minute, so it will jump into set pattern after spare time as one minute, it is also set for sleeping or shutdown.

Closing shutdown key

Which is the function of closing shutdown button. If it is closed, you can't start up this function. Timing and state transition

We might set each time slot as transfer the state of on / off duty, for Instance, with different time , and with different state, such as off duty, overtime or reaching, and leave as exceed time.

Record setrecord set is that display the info of alarm prompt, its branch selection has three 3 functions, include"alarm of administration records, verify record alarm and re-confirm time ".

Alarm of administration records

Which is also the alarm of administration log, which is changing menu records, is also set quantity of record space to alarm surplus volume of message, default as 100. That is to say screen will display alarm info when surplus sapce volume only can save 100 records, by that time, device will prompt you to download administration log or delete records.

·8·

Alarm of verifying records

which means an alarm of ordinary log. ordinary log means the attendance records of pressing fingerprint or brushing card. Each record, each authentication is only one record. when the surplus sapce si reaching alarm quantity, screen will display alarm info, you should download trade. Re-confirm timethe second in this function is preventing the identified No of same user to re-attendance at short time. Default is zero, which means that device will record all records as you re-identify many times, at short time, it will waste useless memory space, therefore, user might set to record one time during number of minutes, allow max time as 255 minutes.(about four and half hours). Communication setup

which is mainly used for administration between fingerprint device and computer. The communication parameter includes: baud rate, device No,TCP/IP.S232, RS 485, connecting password, trends IPdistribute and IP address of background PC etc.

Baud RateBaud rate must be known parameter as using Rs232 and RS485, default rate is 115200bps per second. normally, we use this Baud rate. Device No

Device No is only the identifier for each device, If you have multi devices connected within one same network, you need unique device No. for instance, three devices connected with same network, we must set these device No as No 1,2 ans 3, meanwhile, each device has the default No as 1.

TCP / IP

we could set IP address of fingerprint device within the function of network communication. default IP address is 192.168.1.224, which is network ID of fingerprint device. RS232

this function means the communication through RS232, within the set of NU3100 includes RS232 cable, which has the max communication distance as 5 meters. If your computer doesn't has COM port, you might add one USB commutator to change RS232 to connect PC's USB port.

1 8

·9·

Fingerprint device use the port of RS 232 cable is socket of Rj45berg crystal, its pinout as below:

Pin 6= RS232T, Pin 7 = RS232R, Pin 8 = GND, Pin 1=WGIN 1, Pin 2=WGIN 0, Pin 3=RS485B, Pin 4=RS485A, 5= NC.

RJ45 port of back fingerprint device

RS485

we also can choose whether use RS485 as communication. which have the max communicated distance as 200 meters, Normally, we might use RS485 cable to connect deive, besides, it is better to choose CAT5 cable to replace ordinary 485 cable, becuase CAT5 cable is better in antijamming capability.

But computer doesn't have RS485 communication port, normally it only has RS232 communication port, therefore, we need one commutator which transfer 485 signals to be RS232 signals.

commutator for Rs485 to RS 232

communication of RS485 is adopted as three wires, one is TX+, one is RX+, and ground connection.

·10·

Rs 485 cable uses the same communication socket with RJ45, the pinout as below:

3=RS485B, Pin 4=RS485A, Pin 8 = GND, Pin 1=WGIN 1, Pin 2=WGIN 0, Pin5= NC, Pin 6= RS232T, Pin 7 = RS232R.

use for commutator connection between 485 -232, that is to say , TX+ on device should connect to commutator's RX-, and another one as well.

Connecting password

as you communicate , need one password to identify, which also prevent others using similar software connecting fingerprint device, the default communication password is "0"

Trends IP distributedwhich automatically controls protocol between Router and fingerprint device.DHCP distributes networking IP address into device. IP address of background PCwhich is also IP address of back-end computer, which will send out parameter onto device to operate attendance administration, for example: send one info of user onto device.

Setup of access control

Access controller bases on one of time slot, one user or group couldstart up this connected access controller with these time slots. each time slot has one open time within one week according to name list every day, Sunday to Saterday. Each user can pass identification belong to own group or time slots of gate. their relation is "or". for instance,

if first time slot as below:

Sun 08:00 – 19:00 Mon 08:00 – 19:00 Tue 08:00 – 19:00

Wed 08:00 – 19:00 Thu 08:00 – 19:00 Fri 08:00 – 19:00

Sat 08:00 – 19:00

·11·

second time slot

Sun 21:00 – 23:00 Mon 21:00 – 23:00 Tue 21:00 – 23:00

Wed 21:00 – 23:00 Thu 21:00 – 23:00 Fri 21:00 – 23:00

Sat 21:00 – 23:00

user "John" was appointed as time zone 1 and 2, therefore John can open the door every day, from 8:00 to 19:00 and 21:00 to 23:00. besides, we can set ten of unlocking combination, each combination max has 3 combination patterns,If you choose 2 group of users, any member of the two groups must successfully pass identification at same time.

Setup of time slot

which is built on open time scope within one week. We can define max 50 time zone every day. You only need to input begining and shutown hours and minutes. Time zone 1 can open door within set time.

Sun 00:00 – 23:59 Mon 00:00 – 23:59 Tue 00:00 – 23:59

Wed 00:00 – 23:59 Thu 00:00 – 23:59 Fri 00:00 – 23:59

Sat 00:00 – 23:59

use<up> or <down> arrow to select one of time slot, then press <ok> enter into What day. Setup of grouping function

which can max set 5 groups. To each group, max appoint 3 of time slots ,after all these, the group will open all time slot. new user will have tacit group 1, using up/ down arrow and input time slot to select group(1 to 50).

Tacit identification pattern of group

inside device, you could set tacit identification pattern of group , here has 8 kinds of identificaiton patterns:fingerprint or card or password

fingerprint

card and fingerprintcardjob No and fingerprint

Job No and password

fingerprint and passwordcard and password

setup of user access contro l

We can appoint list of access control to each user.user000001 belong to group 1 time slot of user group is time slot 1 1 time slot 2 8 time slot 3 40 identification pattern of user group is identification pattern fingerprint

·12·

user could be appointed one group, so that user open time zone to user with group. If parameter "using time zone of group" set as "yes" , each user will identify according tome zone of this group.for Instance, if user 00001 using time zone of 3 groups, three time zones separately are 7,8,9, corresponding 7,8,9, that three zones.If we change pattern of time zone, using " time zone of group" to

change as "NO" Auto.

Setup of unlocking combination

We can choose " basic setup of unlocking combination" or setup of unlocking group's combination". Whin basic setup, we only need one set of quantity of open users. default setup is 1, which also means thatafter user pass through checking pattern of first group, the gate will be open. You can set max 5 different group, If set it as second group, that means only users from second group can pass through checkup within 30 seconds. this system doesn't care which group belong to 2. allow first to 3rd group to open door, we can set up 10 group of open door. for example : cluster 1 has first , second,third group, which means any user from the 3 groups can be verified through access control, another sample second group was set up, but fourth group was not set up , so any member from fourth group can open the door. Control time for gate lockcontrol time of gate lock means that time sent through inspection and sign to gate lock adapter.

open inspect time

mini unit is 0.5 second, max 5 seconds. if it was set up as zero, contrller of door lock will be closed. Duration of lock drive

After verifying through, fingerprint device will automatically produce open sign, and connecting E-lock switch to pen, But duration of lock drive means that open door during the appointed time, otherwise, need to re-verify for open. To this function , set unit is " second"

Door magnistor time-lapse

As gate is open, sensor function is also open, door sensor will inspect time. if time over was inspected, alarm will be started up. To this function ,the unit is " second"

Setuo of door magnistor switch

Which includes three kinds of types, such as normal open, normal close and Nothing. "Nothing" stands for not using door magnistor switch. If gate always keep open, lock also as open condition, if lock is closed, alarm function will calculate, and will start up door magnistor switch to time-lapse. if over time , it will alarm. oppositely door often be close, the lock also should be set up for normal close. otherwise, door sensor will start alarm up because time-lapse.

·13·

Setup of stress alarmNormally , user registered two fingerprints , one is used for stress alarm. when user is forced to open door, who will use the fingerprint of stress alarm.

Alarm as wrong press

If we to use this function, press ▲▼” arrows over set times, device will send alarm sign out.assume that we set 3 times, then press fingerprint or input job No of user, and verifying password etc, if it is failure over three times, which will lead to start up the function of stress alarm. if closing this function, only need to set up with "NO".

Function of self-checking

As you distrust fingerprint has problem or need to be repaired, you can use this selection to solve test problem. If you find it working normally as tesing, so you maybe look out other out connected parts. this kind of self-checking includes interior memory,LCD displayer,sound, fingerprint sensor, keyboard and time tested.please looking out keeping stable power as testing, so that exactly check up and test. Otherwise, it is possible to lead to damage device, especially check up under unstable working surroundings.

U disk administration

the main function of U disk inside menu as below:download identification recordsdownload administration recorddownload user InfoUpload user infoupload message notificationupload Mp3

Download identification records

which means download registered data of user into USB disk, job NO of user might has several fingerprint and card or password etc. All data will be downloaded. Download administration records

which means that download administration records into USB disk, any changed record on device will be download into USB disk.

Download user Inofwhich means that download user info from device into USB disk, User info is that all registered identification methods and job No of user etc. upload user info

which means upload user info from USB disk into fingerprint device.

upload message Notification

which means that upload info from USB into fingerprint device. upload Mp3

which means that upload sound and ring from USB disk into fingerprint device.

·14·

Data checkup

this function mainly provides data checkup, which is divided into 3 parts of information such as system info, device Info and advanced checkup.

System info

information checkup includes all data by using memory space of different parameter, as follow below:times of user registeredtimes of fingerprint registeredtimes of password registered time of card registered recorded times of testing and verifyingtimes of administration recordsused RAM

Times of user registered mean the quantity of registers. Times of fingerprint registered is the quantity of fingerprint registered. Time of password register is the quantity of password registered.n the quantity of RF registered is the times of response card registered. Record times of testing and verifying is the quantity of comprehensive identification.Times of administration records is the quantity of administration records changed.used RAM means volumn of used memories.

Dvice Info

device Info is all info data inside fingerprint device, as follow below:date of production serial number manufacturer device namedevice No algorithm edition system edition

·15·

Ddvanced checkup

includes inquiries of checking records, administration records and user register.

inquiry of testing and verifying is checking record for all identification methods, may check according to job No of user or date. checking for Administration records is changing checkup of management log. register to check for user is checking Info of each user.to each inquiry, you need input date scope or Job No of user or user name. Relieve alarm

this function can be seen in menu when alarm is started up, after opening it , we can select to relieve alarm function inside menu, only administrator can do it .