section11:rrfbsignassemby item11-1 ... · pdf filesolar and ac power models within the same...

Carmanah Technologies Corp. | carmanah.com | Telephone: 1.250.380.0052 | Email: [email protected] Technologies Corp. | carmanah.com | Telephone: 1.250.380.0052 | Email: [email protected]

Advanced User-InterfaceThe SC315 features an On-Board User Interface (OBUI) and display for quick configuration and status monitoring. It allows for simple in-the-field set-up and adjustment to flash duration, ambient settings, and night intensity. Settings are broadcast automatically to all units in the network.

Simplified InstallationAll components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a single, compact, purpose-built enclosure. It also incorporates a wire routing and termination system for clean and efficient installation.

Compatibility Compatible with the Carmanah R920 RRFB. Interchange solar and AC power models within the same application.

Trusted

With thousands of installations, Carmanah solar flashing beacons and solar LED products have become the benchmark in traffic and signaling applications worldwide.

* U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT-10-043 - “Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks”

Pedestrian-actuated warning system for uncontrolled marked crosswalks

Available in both AC and solar power models, the SC315 brings new capabilities to the Carmanah RRFB product line:

• Audible push button support• Solar-power performance even in

partial-shaded applications• Use both solar and AC power models

in the same application

RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*.

RECTANGULAR RAPID-FLASHING BEACON

REPRESENTED IN YOUR REGION BY:

SC315ODOT ITB 063-18

Section 11: RRFB Sign AssembyItem 11-1

Solar Powered With Two Light Bars, 50 Watt Solar Panel, 35Ahr Battery & Flasher Controller

(Less Pushbutton, Pole, & Sign Face)


On-Board User Interface (OBUI)

Adjustable, auto-scrolling LED display

Field-configurable flash duration in one second increments

Ambient auto-adjust configuration

Night dimming configuration

Wireless update of configurable settings from any unit to all systems in local network

Channel selection

System test, status and fault detection

Activation data reporting

Optical

MUTCD IA-11 compliant flash pattern

Lens: 3” x 7”, durable polycarbonateLightbar Aperture: 2.6” x 5.8”LED Color: Amber

Side emitting pedestrian confirmation lights

Exceeds SAE J595 Class 1 intensity

Meets SAE J578 chromaticity

High-power LEDs meets 90% lumen maintenance (L90) based on IES LM-80

Connectivity Wireless 2.4GHz mesh technology

AC Power Interface (AC Model)

Cable management bracket

90-264 VAC input

On-board AC-DC power supply

Energy (Solar Model)

50 watt high-efficiency photovoltaic cell with bypass diodes

Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) for optimal energy collection in all solar conditions

Energy Storage (Solar Model)

Replaceable, recyclable best in-class 12V dual battery system (sealed, maintenance-free)

Designed for minimum 5-year battery life

Enclosure Construction

Aluminum housing with lockable tamper-proof hinged door

Integrated mounting for optional voice message push button controller

Side of pole and top of pole mounting to 4” diameter or larger poles

Lightbar Construction

Premium, UV-resistant polycarbonate lenses

Waterproof LED Indications (NEMA 3R)

Two-piece mounting bracket to facilitate mounting back-to-back lightbars

Horizontal rotation adjustment for in-the-field aiming of lightbar

Dimensions: 24” L x 1.5” W x 4.5” H (61.0 cm L x 3.8 cm W x 11.4 cm H)

Operating Performance

Rated for 660, 20 second activations per day, year-round operation with a minimum of 0.94 sun hours

Wireless activation within 150 mS

Wireless range of 500 ft (152 m)

Pedestrian Activation

ADA compliant, Piezo-driven push button with two-tone audible and visual LED confirmation

Optional push-button with voice message & visual LED confirmation

Warranty 5-year limited warranty

Top of Pole Configuration: 4” - 4 1/2” Diameter Round Post Mount

Uni-directional Configuration Bi-directional Configuration

Rotate the lightbar towards the incoming vehicle lane, independent of the wire hole location.

Side View Front View

19.5” (49.5 cm)

10.5” (26.7 cm)

Side of Pole Configuration: 4” - 4 1/2” Diameter Round Post Mount

3D View

6.5” (16.5 cm)

CABINET DIMENSIONS

PANEL MOUNTING OPTIONS

SYSTEM CONFIGURATION

IN THE FIELD AIMING

RRFB CAPACITY CALCULATOR

Specifications subject to local environmental conditions.Specifications may be subject to change.US Patent No 6,573,659, Other patents pending. “Carmanah” and Carmanah logo are trademarks of Carmanah Technologies Corp. © 2016, Carmanah Technologies Corp.Document: SPC_TRAF_SC315_RevN

Calculate the perfomance of our Rectangular Rapid-Flashing Beacon in your location with our RRFB Capacity Calculator.

carmanah.com/RRFB-calculator

SC315RECTANGULAR RAPID-FLASHING BEACON

All Carmanah products are manufactured in facilities that are certified to ISO quality standards.





Trusted













Solar Powered With One Light Bar, 50 Watt Solar Panel, 35AHr Battery And Flasher Controller

(Less Pushbutton, Pole, & Sign Face)








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING











Trusted













AC Powered With Two Light Bars And Flasher Controller(Less Pushbutton, Pole And Sign Face)








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING











Trusted













AC Powered With One Light Bar And Flasher Controller(Less Pushbutton, Pole And Sign Face)








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING











Trusted













Cutsheet Not Available For Light Bar








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING











Trusted













Cutsheet Not Available For 35 AHr Battery








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING











Trusted













Cutsheet Not Available For 16' Light Bar Harness








Channel selection



Optical










90-264 VAC input






























19.5” (49.5 cm)

10.5” (26.7 cm)


3D View

6.5” (16.5 cm)

CABINET DIMENSIONS



IN THE FIELD AIMING







Campbell Company • 450 W. McGregor Boise, ID 83705 • 208-345-7459 • www.pedsafety.com

4 EVR Pedestrian Push Button

FEATURES

Solid state piezo switch Pressure sensitive Actuator will not stick Virtually vandal proof LED and audible tone ADA and MUTCD compliant 5 year warranty

Overview

4 EVR is digitally controlled and virtually vandal proof. Impact resistant from sticks, skateboards, baseball bats, hammers, and similar objects. The 4 EVR utilizes a piezo switch element that cannot be stuck in a constant call. An LED and audible tone provide the pedestrian with feedback that a call has been placed. Feedback options include:

Latching LED and audible dee dah tone Momentary LED and audible dee dah tone No LED and Audible dee dah tone

New Transient protection exceeds NEMA requirements. The actuator is pressure sensitive and uses no screws or bolts in the functioning areas.

Latch Mode Configurations

The 4 EVR can be configured with latching/momentary or no LED. In the latching mode the pilot light is lit when the call is placed and remains on until the walk display is energized. All pushbuttons on the phase are synchronized. Latching mode requires a PBI-L or PBIC-L.

Push Button Isolator: Rack and Shelf

PBI provides an isolated input circuit in a number of configurations including Latching or Momentary, 120 VAC or 24 VDC. The PBI mounts anywhere in the traffic cabinet. The PBIC fits into a 170 card file and replaces the existing isolator cards in the rack. One card manages up to four phases and 16 push buttons

Verisys Registrars® ISO 9001:2008

Certified

ODOT ITB 063-18Section 11: RRFB Sign Assemby

Item 11-8Yellow

Campbell Company • 450 W. McGregor Boise, ID 83705 • 208-345-7459 • www.pedsafety.com

ABOUT

Campbell Company is the leading American manufacturer of pedestrian signal safety products, accessible pedestrian signals (APS) pedestrian push buttons, signs, and hardware.

ADDITIONAL INFORMATION

More information can be found at: www.pedsafety.com

Environmental Specifications

Operating Temperature -40 C to 85 C Operating Life 300 x 10⁶

ADA Specifications

Operating Force < 3 lbf Actuator size 2 inches

Materials

Bezel Aluminum

Actuator Stainless Steel

Hardware Stainless Steel

Finish Powder Coat

Form Factor

Round 3” OD – 4 hole, 2 hole (9-3, 10-2) Rectangular 2.8” x 4.5” – 4 hole, 2 hole Oval 6.8” x 3.4” – 2 hole Color Black, Green, Yellow, Natural

Warranty 5 Years

Feedback Visual LED Super bright Red Audible Dee 2300 Hz – Dah 2000 Hz Latching Mode LED with PBI-L Tactile Optional tactile arrow

Electrical Specifications Operating Voltage DC 18 – 24 VDC Operating Voltage AC 12 – 17 VAC On Resistance < 150 ohms Operating Mode Normally Open Closure Dwell 150 ms Maximum Terminal Voltage During Closure

1.5 V

Switch Piezo electric, solid state switch

Design subject to change without notice.

Description:

Materials:

Geometry:

COLOR: YELLOW


Item 11-8


Item 11-9OMUTCD Legend To Be Specified

Upon Order


Item 11-10OMUTCD Legend To Be Specified

Upon Order


Item 11-11


Item 11-12


Item 11-13

ODOT ITB 063-18 Section 11: RRFB Sign AssemblyItem 11-14 For 36" High Sign

ODOT ITB 063-18 Section 11: RRFB Sign Assembly Item 11-15 For 30" High Sign

ODOT ITB 063-18 Section 11: RRFB Sign Assembly Item 11-19

Leng

th: 1

4 FT


6" - 12" Passed Threads


ODOT ITB 063-18 Section 11: RRFB Sign Assembly Item 11-20 Specify Acorn Or Dome Cap Upon Order

section11:rrfbsignassemby item11-1 ... · pdf filesolar and ac power models within the same...

Documents