section view
TRANSCRIPT
![Page 1: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/1.jpg)
SECTION VIEW
• Section view – a cutaway view - that describes or shows the interior parts of the object
• Types of section• Full section• Half section• Aligned section• Off-set section
Prepared by MARIFA S. TORRALBA,PhD
![Page 2: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/2.jpg)
Prepared by: MARIFA S. TORRALBA, PhD
Isometric
Top view
Front view R. Side view
![Page 3: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/3.jpg)
Top view
Front view R. Side view OBLIQUEOBLIQUE SECTION
FULL SECTION
Section view
Prepared by: MARIFA S. TORRALBA, PhD
![Page 4: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/4.jpg)
Top view
Front view R. Side view OBLIQUE
FULL SECTION
Section view
SECTION
Prepared by: MARIFA S. TORRALBA, PhD
![Page 5: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/5.jpg)
Prepared by: MARIFA S. TORRALBA, PhD
Top view
Front view R. Side view OBLIQUE
HALF-SECTION
Section view
Section view
SECTION
CENTER LINE is used instead of a visible line
![Page 6: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/6.jpg)
Top view
Front viewR. Side view
SECTION
Section view
Prepared by: MARIFA S. TORRALBA, PhD
OBLIQUEGives the impression that
these holes are in
asymmetrical position.
ALIGNED SECTIONWhen viewed according to its angled Cutting plane line, its 3D oblique section is shown,
![Page 7: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/7.jpg)
Top view
Front viewR. Side view
SECTION
Section view
Prepared by: MARIFA S. TORRALBA, PhD
When viewed according to its angled Cutting plane line, its 3D oblique section is shown,
the angled cutting plane line is revolved to make it a FULL section
OBLIQUEGives the impression that
these holes are at
asymmetrical position.
ALIGNED SECTION
![Page 8: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/8.jpg)
(pls complete this Top view)
Front view R. Side view
OBLIQUE
OFF-SET SECTION
Section view
Prepared by: MARIFA S. TORRALBA, PhD
SECTION
The bended cutting plane line when projected to the section view becomes a FULLSection as shown…
![Page 9: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/9.jpg)
ACTIVITY instructions
• Follow the standard line types/thickness when inking
• Always retain the pencil/construction lines
• Final plate will consist of 6 drawings
Prepared by: MARIFA S. TORRALBA, PhD
![Page 10: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/10.jpg)
FRONT VIEW SIDE VIEW
TOP VIEW
REQUIRED:•FRONT VIEW•R. SIDE VIEW•TOP SECTION VEW•SECTION VIEW•OBLIQUE SECTION
Prepared by: MARIFA S. TORRALBA, PhD
![Page 11: Section View](https://reader036.vdocuments.us/reader036/viewer/2022082915/546dad09b4af9f58588b4f07/html5/thumbnails/11.jpg)
Title
Name
Sec. Date
Activity No.
Station No.Student No.
Marifa S. Torralba,
SAMPLEHALF-SECTION VIEW
FRONT VIEW R.SIDE VIEW FULL SECTION VIEW
OBLIQUE FULL SECTION
DRAW also the OBLIQUE Half section