· section trade page item description uom quantity time fixed value rate 1 preliminaries 2...
TRANSCRIPT
Section Trade Page Item Description Uom Quantity Time Fixed Value
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
PRELIMINARIES
PREAMBLES FOR TRADES
PRELIMINARIES
The Model Preambles for Trades (2008 edition) as published by the Association of South African Quantity Surveyors shall be deemed to be incorporated in these bills of quantities and no claims arising from brevity of description of items fully described in
PRELIMINARIES
Supplementary preambles are incorporated in these bills of quantities to satisfy the requirements of this project. Such supplementary preambles shall take precedence over the provisions of the said Model Preambles
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 1 Item 1 0.00 0.00 0.00
1 2 2 Item 1 0.00 0.00 0.00
1 2 3 Item 1 0.00 0.00 0.00
1 2 4 Item 1 0.00 0.00 0.00
1 2 5 Item 1 0.00 0.00 0.00
1 2 6 Item 1 0.00 0.00 0.00
1 2 7 Item 1 0.00 0.00 0.00
1 3 8 Item 1 0.00 0.00 0.00
1 3 9 Item 1 0.00 0.00 0.00
1 3 10 Item 1 0.00 0.00 0.00
PRELIMINARIES
The contractor's prices for all items throughout these bills of quantities must take account of and include for all of the obligations, requirements and specifications given in the said Model Preambles and in any supplementary preambles
PRELIMINARIES
SECTION A - GENERAL CONDITIONS
PRELIMINARIES
1.0 - GENERAL PROVISIONS
PRELIMINARIES
Clause 1.1 - Definitions
PRELIMINARIES
Clause 1.2 - Interpretation
PRELIMINARIES
Clause 1.3 - Communications
PRELIMINARIES
Clause 1.4 - Law and Language
PRELIMINARIES
Clause 1.5 - Priority of Documents
PRELIMINARIES
Clause 1.6 - Contract Agreement
PRELIMINARIES
Clause 1.7 - Assigment
PRELIMINARIES
Clause 1.8 - Care and Supply of Documents
PRELIMINARIES
- Delayed Drawings or Instructions
PRELIMINARIES
Clause 1.10 - Employer's Use of Contractor's Documents
1 3 11 Item 1 0.00 0.00 0.00
1 3 12 Item 1 0.00 0.00 0.00
1 3 13 Item 1 0.00 0.00 0.00
1 3 14 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.11 - Contractor's Use of Employer's Documents
PRELIMINARIES
Clause 1.12 - Confidential Details
PRELIMINARIES
Clause 1.13 - Compliance with Laws
PRELIMINARIES
Clause 1.13 - Compliance with Laws[a]Contractor to comply with the Namibia Environmental Management Act No.7 of year 2007 as well as the Environmental Assessment Policy of year 1995 by implementing the Environmental Management Plans (EMP) documented se
1 3 15 Item 1 0.00 0.00 0.00
1 3 16 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 17 Item 1 0.00 0.00 0.00
1 4 18 Item 1 0.00 0.00 0.00
1 4 19 Item 1 0.00 0.00 0.00
1 4 20 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 21 Item 1 0.00 0.00 0.00
1 4 22 Item 1 0.00 0.00 0.00
1 4 23 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.13 - Compliance with Laws[b]Contractor to comply with the Namibia Public Health and Safety Management Policy under Act No. 11 of year 2007 by implementing the Public Health and Safety Awareness Plan (PHSAP) documented separately as part of th
PRELIMINARIES
Clause 1.14 - Joint and Several Liability
PRELIMINARIES
2.0 - THE EMPLOYER
PRELIMINARIES
Clause 2.1 - Right of Access to the Site
PRELIMINARIES
Clause 2.2 - Permits, Licences or Approvals
PRELIMINARIES
Clause 2.3 - Employer's Personnel
PRELIMINARIES
Clause 2.4 - Employer's Financial Arrangement
PRELIMINARIES
3.0 - THE ENGINEER
PRELIMINARIES
Clause 3.1 - Engineer's Duties and Authority
PRELIMINARIES
Clause 3.2 - Delegation by the Engineer
PRELIMINARIES
Clause 3.3 - Instructions of the Engineer
1 4 24 Item 1 0.00 0.00 0.00
1 4 25 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 26 Item 1 0.00 0.00 0.00
1 4 27 Item 1 0.00 0.00 0.00
1 4 28 Item 1 0.00 0.00 0.00
1 5 29 Item 1 0.00 0.00 0.00
1 5 30 Item 1 0.00 0.00 0.00
1 5 31 Item 1 0.00 0.00 0.00
1 5 32 Item 1 0.00 0.00 0.00
1 5 33 Item 1 0.00 0.00 0.00
1 5 34 Item 1 0.00 0.00 0.00
1 5 35 Item 1 0.00 0.00 0.00
1 5 36 Item 1 0.00 0.00 0.00
1 5 37 Item 1 0.00 0.00 0.00
1 5 38 Item 1 0.00 0.00 0.00
1 5 39 Item 1 0.00 0.00 0.00
1 5 40 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 3.4 - Replacement of the Engineer
PRELIMINARIES
Clause 3.5 - Determinations
PRELIMINARIES
4.0 - THE CONTRACTOR
PRELIMINARIES
Clause 4.1 - Contractor's General Obligations
PRELIMINARIES
Clause 4.2 - Performance Security
PRELIMINARIES
Clause 4.3 - Contactor's Security
PRELIMINARIES
Clause 4.4 - Subcontractors
PRELIMINARIES
Clause 4.5 - Assignment of Bennefit of Subcontract
PRELIMINARIES
Clause 4.6 - Co-operation
PRELIMINARIES
Clause 4.7 - Setting Out
PRELIMINARIES
Clause 4.8 - Safety Procedures
PRELIMINARIES
Clause 4.9 - Quality Assurance
PRELIMINARIES
Clause 4.10 - Site Data
PRELIMINARIES
Clause 4.11 - Sufficiency of the Accepted Contract Amount
PRELIMINARIES
Clause 4.12 - Unforseeable Physical Conditions
PRELIMINARIES
Clause 4.13 - Rights of Way and Facilities
PRELIMINARIES
Clause 4.14 - Avoidance of Interference
PRELIMINARIES
Clause 4.15 - Access Route
1 5 41 Item 1 0.00 0.00 0.00
1 6 42 Item 1 0.00 0.00 0.00
1 6 43 Item 1 0.00 0.00 0.00
1 6 44 Item 1 0.00 0.00 0.00
1 6 45 Item 1 0.00 0.00 0.00
1 6 46 Item 1 0.00 0.00 0.00
1 6 47 Item 1 0.00 0.00 0.00
1 6 48 Item 1 0.00 0.00 0.00
1 6 49 Item 1 0.00 0.00 0.00
1 6 0.00 0.00 0.00
1 6 50 Item 1 0.00 0.00 0.00
1 6 51 Item 1 0.00 0.00 0.00
1 6 52 Item 1 0.00 0.00 0.00
1 6 53 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
PRELIMINARIES
Clause 4.16 - Transport of Goods
PRELIMINARIES
Clause 4.17 - Contractor's Equipment
PRELIMINARIES
4.18 - Protection of the Enviroment
PRELIMINARIES
Clause 4.19 - Electricity, Water and Gas
PRELIMINARIES
Clause 4.20 - Employer's Equipment and Free-Issue Material
PRELIMINARIES
Clause 4.21 - Progress Reports
PRELIMINARIES
Clause 4.22 - Security of the Site
PRELIMINARIES
Clause 4.23 - Contractor's Operations on Site
PRELIMINARIES
Clause 4.24 - Fossils
PRELIMINARIES
5.0 - NOMINATED SUBCONTRACTORS
PRELIMINARIES
- Definition of "nominated Subcontractor"
PRELIMINARIES
Clause 5.2 - Objection to Nomination
PRELIMINARIES
Clause 5.3 - Payments to nominated Subcontractors
PRELIMINARIES
Clause 5.4 - Evidence of Payments
PRELIMINARIES
6.0 - STAFF AND LABOUR
1 7 54 Item 1 0.00 0.00 0.00
1 7 55 Item 1 0.00 0.00 0.00
1 7 56 Item 1 0.00 0.00 0.00
1 7 57 Item 1 0.00 0.00 0.00
1 7 58 Item 1 0.00 0.00 0.00
1 7 59 Item 1 0.00 0.00 0.00
1 7 60 Item 1 0.00 0.00 0.00
1 7 61 Item 1 0.00 0.00 0.00
1 7 62 Item 1 0.00 0.00 0.00
1 7 63 Item 1 0.00 0.00 0.00
1 7 64 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
1 7 65 Item 1 0.00 0.00 0.00
1 8 66 Item 1 0.00 0.00 0.00
1 8 67 Item 1 0.00 0.00 0.00
1 8 68 Item 1 0.00 0.00 0.00
1 8 69 Item 1 0.00 0.00 0.00
1 8 70 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 6.1 - Engagement of Staff and Labour
PRELIMINARIES
Clause 6.2 - Rates of Wages and Conditions of Labour
PRELIMINARIES
Clause 6.3 - Persons in the Service of Employer
PRELIMINARIES
Clause 6.4 - Labour Laws
PRELIMINARIES
Clause 6.5 - Working Hours
PRELIMINARIES
Clause 6.6 - Facilities for Staff and Labour
PRELIMINARIES
Clause 6.7 - Health and Safety
PRELIMINARIES
Clause 6.8 - Contractor's Superintendence
PRELIMINARIES
Clause 6.9 - Contractor's Personnel
PRELIMINARIES
Clause 6.10 - Records of Contractor's Personnel and Equipment
PRELIMINARIES
Clause 6.11 - Disorderly Conduct
PRELIMINARIES
7.0 - PLANT, MATERIALS AND WORKMANSHIP
PRELIMINARIES
Clause 7.1 - Manner of Execution
PRELIMINARIES
Clause 7.2 - Samples
PRELIMINARIES
Clause 7.3 - Inspection
PRELIMINARIES
Clause 7.4 - Testing
PRELIMINARIES
Clause 7.5 - Rejection
PRELIMINARIES
Clause 7.6 - Remedial Work
1 8 71 Item 1 0.00 0.00 0.00
1 8 72 Item 1 0.00 0.00 0.00
1 8 0.00 0.00 0.00
1 8 73 Item 1 0.00 0.00 0.00
1 8 74 Item 1 0.00 0.00 0.00
1 8 75 Item 1 0.00 0.00 0.00
1 8 76 Item 1 0.00 0.00 0.00
1 8 77 Item 1 0.00 0.00 0.00
1 8 78 Item 1 0.00 0.00 0.00
1 9 79 Item 1 0.00 0.00 0.00
1 9 80 Item 1 0.00 0.00 0.00
1 9 81 Item 1 0.00 0.00 0.00
1 9 82 Item 1 0.00 0.00 0.00
1 9 83 Item 1 0.00 0.00 0.00
1 9 84 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 85 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 7.7 - Ownership of Plant and Material
PRELIMINARIES
Clause 7.8 - Royalties
PRELIMINARIES
8.0 - COMMENCEMENT, DELAYS AND SUSPENSION
PRELIMINARIES
Clause 8.1 - Commencement of Works
PRELIMINARIES
Clause 8.2 - Time for Completion
PRELIMINARIES
- Programme
PRELIMINARIES
Clause 8.4 - Extension of Time for Completion
PRELIMINARIES
Clause 8.5 - Delays cuased by Authorities
PRELIMINARIES
Clause 8.6 - Rate of Progress
PRELIMINARIES
Clause 8.7 - Delay Damages
PRELIMINARIES
Clause 8.8 - Suspension of Work
PRELIMINARIES
Clause 8.9 - Consequences of Suspension
PRELIMINARIES
Clause 8.10 - Payment for Plant and Materials in Event of Suspension
PRELIMINARIES
Clause 8.11 - Prolonged Suspension
PRELIMINARIES
Clause 8.12 - Resumption of Work
PRELIMINARIES
9.0 - TESTS ON COMPLETION
PRELIMINARIES
- Contractor's Obligation
1 9 86 Item 1 0.00 0.00 0.00
1 9 87 Item 1 0.00 0.00 0.00
1 9 88 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 89 Item 1 0.00 0.00 0.00
1 9 90 Item 1 0.00 0.00 0.00
1 10 91 Item 1 0.00 0.00 0.00
1 10 92 Item 1 0.00 0.00 0.00
1 10 0.00 0.00 0.00
1 10 93 Item 1 0.00 0.00 0.00
1 10 94 Item 1 0.00 0.00 0.00
1 10 95 Item 1 0.00 0.00 0.00
1 10 96 Item 1 0.00 0.00 0.00
1 10 97 Item 1 0.00 0.00 0.00
1 10 98 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 9.2 - Delayed Tests
PRELIMINARIES
Clause 9.3 - Retesting
PRELIMINARIES
Clause 9.4 - Failure to Pass Tests on Completion
PRELIMINARIES
10.0 - EMPLOYER'S TAKING OVER
PRELIMINARIES
Clause 10.1 - Taking Over of the Works and Sections
PRELIMINARIES
Clause 10.2 - Taking Over of Parts of the Works
PRELIMINARIES
Clause 10.3 - Interference with Tests on Completion
PRELIMINARIES
Clause 10.4 - Surfaces Requiring Reinstatement
PRELIMINARIES
11.0 - DEFECTS LIABILITY
PRELIMINARIES
Clause 11.1 - Completion of Outstandin g Work and Remedying Defects
PRELIMINARIES
Clause 11.2 - Cost of Remedying Defects
PRELIMINARIES
Clause 11.3 - Extension of Defects Notification Period
PRELIMINARIES
Clause 11.4 - Failure to Remedy Defects
PRELIMINARIES
Clause 11.5 - Removal of Defective Work
PRELIMINARIES
Clause 11.6 - Further Tests
1 10 99 Item 1 0.00 0.00 0.00
1 10 100 Item 1 0.00 0.00 0.00
1 10 101 Item 1 0.00 0.00 0.00
1 10 102 Item 1 0.00 0.00 0.00
1 10 103 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 104 Item 1 0.00 0.00 0.00
1 11 105 Item 1 0.00 0.00 0.00
1 11 106 Item 1 0.00 0.00 0.00
1 11 107 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 108 Item 1 0.00 0.00 0.00
1 11 109 Item 1 0.00 0.00 0.00
1 11 110 Item 1 0.00 0.00 0.00
1 11 111 Item 1 0.00 0.00 0.00
1 11 112 Item 1 0.00 0.00 0.00
1 11 113 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 11.7 - Right of Access
PRELIMINARIES
Clause 11.8 - Contractor to Search
PRELIMINARIES
Clause 11.9 - Performance Certificate
PRELIMINARIES
Clause 11.10 - Unfulfilled Obligations
PRELIMINARIES
Clause 11.11 - Clearance of Site
PRELIMINARIES
12.0 - MEASUREMENT AND EVALUATION LIABILITY
PRELIMINARIES
Clause 12.1 - Works to be Measured
PRELIMINARIES
Clause 12.2 - Method of Measurement
PRELIMINARIES
Clause 12.3 - Evaluation
PRELIMINARIES
Clause 12.4 - Ommisions
PRELIMINARIES
13.0 - VARIATIONS AND ADJUSTMENTS
PRELIMINARIES
Clause 13.1 - Right to Vary
PRELIMINARIES
13.2 - Value Engineering
PRELIMINARIES
Clause 13.3 - Variation Procedure
PRELIMINARIES
Clause 13.4 - Payment in Applicable Currencies
PRELIMINARIES
Clause 13.5 - Provisional Sums
PRELIMINARIES
Clause 13.6 - Daywork
1 11 114 Item 1 0.00 0.00 0.00
1 11 115 Item 1 0.00 0.00 0.00
1 12 0.00 0.00 0.00
1 12 116 Item 1 0.00 0.00 0.00
1 12 117 Item 1 0.00 0.00 0.00
1 12 118 Item 1 0.00 0.00 0.00
1 12 119 Item 1 0.00 0.00 0.00
1 12 120 Item 1 0.00 0.00 0.00
1 12 121 Item 1 0.00 0.00 0.00
1 12 122 Item 1 0.00 0.00 0.00
1 12 123 Item 1 0.00 0.00 0.00
1 12 124 Item 1 0.00 0.00 0.00
1 12 125 Item 1 0.00 0.00 0.00
1 12 126 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 13.7 - Adjustments for Changes in Legislation
PRELIMINARIES
Clause 13.8 - Adjustments for Changes in Cost
PRELIMINARIES
14.0 - CONTRACT PRICE AND PAYMENTS
PRELIMINARIES
Clause 14.1 - The Contract Price
PRELIMINARIES
Clause 14.2 - Advance Payment
PRELIMINARIES
Clause 14.3 - Application for Iterim Payment Certificates
PRELIMINARIES
Clause 14.4 - Schedule of Payments
PRELIMINARIES
Clause 14.5 - Plant and Materials Intended for the Works
PRELIMINARIES
Clause 14.6 - Issue of Interim Payment Certificates
PRELIMINARIES
Clause 14.7 - Payment
PRELIMINARIES
Clause 14.8 - Delayed Payment
PRELIMINARIES
Clause 14.9 - Payment of Retention Money
PRELIMINARIES
Clause 14.10 - Statement at Completion
PRELIMINARIES
Clause 14.11 - Application for Final Payment Certificate
1 12 127 Item 1 0.00 0.00 0.00
1 12 128 Item 1 0.00 0.00 0.00
1 13 129 Item 1 0.00 0.00 0.00
1 13 130 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 131 Item 1 0.00 0.00 0.00
1 13 132 Item 1 0.00 0.00 0.00
1 13 133 Item 1 0.00 0.00 0.00
1 13 134 Item 1 0.00 0.00 0.00
1 13 135 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 136 Item 1 0.00 0.00 0.00
1 13 137 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 14.12 - Discharge
PRELIMINARIES
Clause 14.13 - Issue of Final Payment Certificate
PRELIMINARIES
Clause 14.14 - Cessation of Employer's Liability
PRELIMINARIES
Clause 14.15 - Currencies of Payment
PRELIMINARIES
15.0 - TERMINATION BY EMPLOYER
PRELIMINARIES
Clause 15.1 - Notice to Correct
PRELIMINARIES
Clause 15.2 - Termination by Employer
PRELIMINARIES
15.3 - Valuation at Date of Termination
PRELIMINARIES
15.4 - Payment after Termination
PRELIMINARIES
15.5 - Empoyer's Entitlement to Termination
PRELIMINARIES
16.0 - SUPSENSION AND TERMINATION BY CONTRACTOR
PRELIMINARIES
Clause 16.1 - Contractor's Entitlement to Suspend Work
PRELIMINARIES
Clause 16.2 - Termination by Contractor
1 13 138 Item 1 0.00 0.00 0.00
1 13 139 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 140 Item 1 0.00 0.00 0.00
1 14 141 Item 1 0.00 0.00 0.00
1 14 142 Item 1 0.00 0.00 0.00
1 14 143 Item 1 0.00 0.00 0.00
1 14 144 Item 1 0.00 0.00 0.00
1 14 145 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 146 Item 1 0.00 0.00 0.00
1 14 147 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 16.3 - Cessasion of Work and Removal of Contractor's Equipment
PRELIMINARIES
16.4 - Payment on Termination
PRELIMINARIES
17.0 - RISK AND RESPONSIBILITY
PRELIMINARIES
Clause 17.1 - Indemnities
PRELIMINARIES
Clause 17.2 - Contractor's Care of the Works
PRELIMINARIES
Clause 17.3 - Employer's Risks
PRELIMINARIES
Clause 17.4 - Consequences of Employer's Risks
PRELIMINARIES
Clause 17.5 - Intellectual and Industrial Property Rights
PRELIMINARIES
Clause 17.6 - Limitation of Liability
PRELIMINARIES
18.0 - INSURANCE
PRELIMINARIES
Clause 18.1 - General Requierments for Insurances
PRELIMINARIES
Clause 18.2 - Insurance for Works and Contractor's Equipment
1 14 148 Item 1 0.00 0.00 0.00
1 14 149 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 150 Item 1 0.00 0.00 0.00
1 14 151 Item 1 0.00 0.00 0.00
1 14 152 Item 1 0.00 0.00 0.00
1 15 153 Item 1 0.00 0.00 0.00
1 15 154 Item 1 0.00 0.00 0.00
1 15 155 Item 1 0.00 0.00 0.00
1 15 156 Item 1 0.00 0.00 0.00
1 15 0.00 0.00 0.00
1 15 157 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 18.3 - Insurance against Injury to Persons and Damage to Property
PRELIMINARIES
Clause 18.4 - Insurance for Contractor's Personnel
PRELIMINARIES
19.0 - FORCE MAJEURE
PRELIMINARIES
Clause 19.1 - Definition of Force Majuere
PRELIMINARIES
Clause 19.2 - Notice of Force Majuere
PRELIMINARIES
Clause 19.3 - Duty to Minimise Delay
PRELIMINARIES
Clause 19.4 - Consequences of Force Majuere
PRELIMINARIES
Clause 19.5 - Force Majuere Affecting Subcontractor
PRELIMINARIES
Clause 19.6 - Optional Termination, Payment and Release
PRELIMINARIES
Clause 19.7 - Release from Performance under the Law
PRELIMINARIES
20.0 - CLAIMS, DISPUTES AND ARBITRATION
PRELIMINARIES
Clause 20.1 - Contractors Claim
1 15 158 Item 1 0.00 0.00 0.00
1 15 159 Item 1 0.00 0.00 0.00
1 15 160 Item 1 0.00 0.00 0.00
1 15 161 Item 1 0.00 0.00 0.00
1 15 162 Item 1 0.00 0.00 0.00
1 15 163 Item 1 0.00 0.00 0.00
1 15 164 Item 1 0.00 0.00 0.00
1 16 0.00 0.00 0.00
PRELIMINARIES
Clause 20.2 - Appointment of the Dispute Adjudication Board
PRELIMINARIES
Clause 20.3 - Failire to Agree Dispute Adjudication Board
PRELIMINARIES
Clause 20.4 - Obtaining Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.5 - Amicable Settlement
PRELIMINARIES
Clause 20.6 - Arbitration
PRELIMINARIES
Clause 20.7 - Failure to Comply Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.8 - Expiry of Dispute Adjudication Board's Appointment
PRELIMINARIES
SECTION B - MODEL PRELIMINARIES
1 16 0.00 0.00 0.00
1 16 0.00 0.00 0.00
1 16 165 Item 1 0.00 0.00 0.00
1 16 166 Item 1 0.00 0.00 0.00
PRELIMINARIES
Model Preliminary Document can be purchased from the Institute of Namibian Quantity Surveyor's offices situated at 22 Stein Street, Klein Windhoek, Windhoek during week days from 8H00 to 12H00.
All references in this document made to "the Architect" wi
PRELIMINARIES
B1: Supplementary Documentation
PRELIMINARIES
B1.1: Bills of Quantities
These Bills of Quantities contain pages and annexures as indexed on the flyleaf.
These Bills of Quantities are consecutively numbered and the Tenderer is required to check the number of pages and should any be found missing
PRELIMINARIES
B1.2: Provisional Bills of Quantities
1 16 167 Item 1 0.00 0.00 0.00
1 17 168 Item 1 0.00 0.00 0.00
1 17 169 Item 1 0.00 0.00 0.00
1 17 170 Item 1 0.00 0.00 0.00
1 17 171 Item 1 0.00 0.00 0.00
1 17 172 Item 1 0.00 0.00 0.00
1 17 173 Item 1 0.00 0.00 0.00
1 17 174 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.3: Availability of Construction Documentation for contracts based on Provisional Bills of Quantities
PRELIMINARIES
B1.4: Name of Architect, Quantity Surveyor and Specialist Consultants
Refer to the Appedix To Tender
PRELIMINARIES
B1.5: Lodging and Scrutiny of priced Bills of Quantities.
These Bills of Quantities must be extended in black ink.
PRELIMINARIES
B1.6: Meaning of Words
PRELIMINARIES
B1.7: Performance Guarantee by Contractor
PRELIMINARIES
B1.8: Payment Guarantee by Employer
PRELIMINARIES
B1.9: Waiver of Contractor's Lien
PRELIMINARIES
B1.10: Signing powers
1 17 175 Item 1 0.00 0.00 0.00
1 17 176 Item 1 0.00 0.00 0.00
1 18 B2 The Site 0.00 0.00 0.00
1 18 177 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.11: Tenders
Notwithstanding anything contained in this clause, tenders shall be valid for a period as stipulated in the separate Bid Invitation Documents, from the closing date of tenders.
The Employer reserves the right to correct any arithmetic
PRELIMINARIES
B1.12: Inspection of Documents
PRELIMINARIES
PRELIMINARIES
B2.1: Site and Bounderies
The sites will be as indicated on the site plans in the Bidding Documents.
1 18 178 Item 1 0.00 0.00 0.00
1 18 179 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.2: Area of the Works
The Area of the Works to be occupied by the Contractor, any restriction on the area and the limit of access or exit will be pointed out to the Contractor by the Engineer on handing over of the Site.
PRELIMINARIES
B2.3: Boundary Beacons, setting-out pegs and master datum
The Contractor shall notify the Engineer if any encroachments of adjoining foundations, buildings, structures, pavements, etc., exist so that the necessary arrangements can be made for the rect
1 18 180 Item 1 0.00 0.00 0.00
1 18 181 Item 1 0.00 0.00 0.00
1 18 182 Item 1 0.00 0.00 0.00
1 18 183 Item 1 0.00 0.00 0.00
1 19 184 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.4: Site soil investigation
No site soil investigation report is available and the Tenderer is advised to inspect the site to ascertain the exact nature of the ground and report to the Engineer.
PRELIMINARIES
B2.5 : Viewing of the Site
No claims for extras arising from the Contractor having failed to comply with this Clause will be entertained.
PRELIMINARIES
B2.6: Existing premises occupied
PRELIMINARIES
B2.7: Dimensional accuracy of work executed under the previous contract
PRELIMINARIES
B2.8: Patent Defects in work executed under the previous contract
1 19 185 Item 1 0.00 0.00 0.00
1 19 186 Item 1 0.00 0.00 0.00
1 19 187 Item 1 0.00 0.00 0.00
1 19 188 Item 1 0.00 0.00 0.00
1 19 189 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 190 Item 1 0.00 0.00 0.00
1 19 191 Item 1 0.00 0.00 0.00
1 19 192 Item 1 0.00 0.00 0.00
1 19 193 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 194 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.9: Existing known services
Existing services and points of connection are shown on the Site plan or will be pointed out on the Site by the Engineer.
PRELIMINARIES
B2.10: Unknown Services
PRELIMINARIES
B2.11: Protection of trees
PRELIMINARIES
B2.12: Articles of Value
PRELIMINARIES
B2.13: Inspection of nearby properties etc.
PRELIMINARIES
B3 Management of Contract
PRELIMINARIES
B3.1: Management of Works
PRELIMINARIES
B3.2: Programming of The Works
The Contract shall be programmed by the Contractor in accordance with Alternative A
PRELIMINARIES
B3.3: Progress Meetings
PRELIMINARIES
B3.4: Technical Meetings
PRELIMINARIES
B4: Materials and Workmanship
PRELIMINARIES
B4.1: Samples of materials
1 20 195 Item 1 0.00 0.00 0.00
1 20 196 Item 1 0.00 0.00 0.00
1 20 0.00 0.00 0.00
1 20 197 Item 1 0.00 0.00 0.00
1 20 198 Item 1 0.00 0.00 0.00
1 20 199 Item 1 0.00 0.00 0.00
1 20 200 Item 1 0.00 0.00 0.00
1 20 201 Item 1 0.00 0.00 0.00
1 20 202 Item 1 0.00 0.00 0.00
PRELIMINARIES
B4.2: Samples of workmanship and mockups
PRELIMINARIES
B4.3: Ordering of materials
PRELIMINARIES
B5: Temporary Works and Plant
PRELIMINARIES
B5.1: Deposits and Fees
PRELIMINARIES
B5.2: Enclosure of Works
PRELIMINARIES
B5.3: Pavement crossings and parking meters
PRELIMINARIES
B5.4: Advertising
PRELIMINARIES
B5.5: Plant and Equipment
PRELIMINARIES
B5.6: Special Scaffolding
No special scaffolding is measured as these Bills of Quantities are based on the Sixth edition of the Standard System for Measuring Building Work.
1 20 203 Item 1 0.00 0.00 0.00
1 20 204 Item 1 0.00 0.00 0.00
1 20 205 Item 1 0.00 0.00 0.00
1 21 206 Item 1 0.00 0.00 0.00
1 21 207 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 208 Item 1 0.00 0.00 0.00
PRELIMINARIES
B5.7: Contractor's Offices and Sheds
Under NO circumstances may any of the buildings at any stage be used for temporary accommodation for workers, contractor's offices or the storage of materials.
PRELIMINARIES
B5.8: Offices
PRELIMINARIES
B5.9: Office of the Clerk of Works
PRELIMINARIES
B5.10: Main Noticeboards (one per site)
PRELIMINARIES
B5.11: Subcontractors' Noticeboard
PRELIMINARIES
B6: Temporary Services
PRELIMINARIES
B6.1: Water
The contractor shall provide water for The Works in accordance with Alternative A
1 21 209 Item 1 0.00 0.00 0.00
1 21 210 Item 1 0.00 0.00 0.00
1 21 211 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 212 Item 1 0.00 0.00 0.00
PRELIMINARIES
B6.2: Electricity and Lighting
The contractor shall provide electricity and lighting for The Works in accordance with Alternative A
PRELIMINARIES
B6.3: Telephones
The contractor shall provide telephones for the Works in accordance with Alternative A
PRELIMINARIES
B6.4: Toilets
The contractor shall provide toilets for The Works in accordance with Alternative A
PRELIMINARIES
B7: Prime Cost and Provisional Amounts
PRELIMINARIES
B7.1: Cash Discount
All Prime Cost and Provisional Sums are net and do not include a cash discount, nor will the Contractor be allowed or entitled to a cash discount.
1 21 213 Item 1 0.00 0.00 0.00
1 22 214 Item 1 0.00 0.00 0.00
1 22 215 Item 1 0.00 0.00 0.00
1 22 216 Item 1 0.00 0.00 0.00
1 22 0.00 0.00 0.00
1 22 217 Item 1 0.00 0.00 0.00
1 22 218 N/A 1 0.00 0.00 0.00
PRELIMINARIES
B7.2: Taking delivery and fixing of prime cost items
PRELIMINARIES
B7.3: Nominated or Selected Subcontract Documents
PRELIMINARIES
B7.4: Attendance on Nominated or Selected Subcontractors
PRELIMINARIES
B7.5: Fuel, power and water for commissioning of mechanical and other specialised installations
PRELIMINARIES
B8: Financial Aspects
PRELIMINARIES
B8.1: Sales Taxes
Delete the whole of this clause and replace with the following:
B8.1: Taxes, etc.
Provision is made in the separate Bid Invitation Documents for the inclusion of Value Added Tax (VAT) at 15%. The Contractor shall price these B
PRELIMINARIES
B8.2: Contract price adjusment provisions
1 22 219 Item 1 0.00 0.00 0.00
1 22 220 Item 1 0.00 0.00 0.00
1 23 221 Item 1 0.00 0.00 0.00
1 23 222 N/A 1 0.00 0.00 0.00
1 23 223 Item 1 0.00 0.00 0.00
PRELIMINARIES
B8.3: Payment of Preliminaries
Payment of Preliminaries will be calculated from the priced items within the Preliminaries in accordance with Alternative B
In addition to the exclusions mentioned in the third paragraph of this clause it shall be deem
PRELIMINARIES
B8.4: Adjustment of Preliminaries
The Adjustment of Preliminaries will be on the basis of fixed price, value related and time related items in accordance with Method 3.
In addition to the exclusions mentioned in the this paragraph of this clause it
PRELIMINARIES
B8.5: Certificate payment projection
PRELIMINARIES
B8.6: Dayworks
PRELIMINARIES
B8.7: Information supplied by Contractor
1 23 0.00 0.00 0.00
1 23 224 Item 1 0.00 0.00 0.00
1 23 225 Item 1 0.00 0.00 0.00
1 23 226 Item 1 0.00 0.00 0.00
1 23 227 Item 1 0.00 0.00 0.00
1 23 228 Item 1 0.00 0.00 0.00
1 23 229 Item 1 0.00 0.00 0.00
1 23 230 Item 1 0.00 0.00 0.00
1 23 231 Item 1 0.00 0.00 0.00
1 24 232 Item 1 0.00 0.00 0.00
1 24 233 Item 1 0.00 0.00 0.00
1 24 0.00 0.00 0.00
1 24 234 Item 1 0.00 0.00 0.00
PRELIMINARIES
B9: General
PRELIMINARIES
B9.1: Protection
PRELIMINARIES
B9.2: Protection of existing and/or partially occupied works.
PRELIMINARIES
B9.3: Safety
PRELIMINARIES
B9.4: Site security
PRELIMINARIES
B9.5: Notice before covering work
PRELIMINARIES
B9.6: Disturbance
PRELIMINARIES
B9.7: Clearing and cleaning
PRELIMINARIES
B9.8: Vermin
PRELIMINARIES
B9.9: Overhand Work
PRELIMINARIES
B9.10: Jobbing
PRELIMINARIES
SECTION C - SPECIFIC PRELIMINARIES
PRELIMINARIES
Site instructions
Instructions issued on site are to be recorded in triplicate in a site instruction book which is to be maintained on site by the contractor
1 24 235 Item 1 0.00 0.00 0.00
1 24 236 Item 1 0.00 0.00 0.00
PRELIMINARIES
Warranties for material and workmanship
Where warranties for materials and/or workmanship are called for, the contractor shall obtain a written warranty, addressed to the employer, from the firm supplying the materials and/or doing the work and shall d
PRELIMINARIES
Co-operation of contractor for cost management
It is specifically agreed that the contractor accepts the obligation of assisting the engineer in implementing proper cost management. The contractor will be advised by the engineer of all cost management
1 25 237 Item 1 0.00 0.00 0.00
1 25 238 Item 1 0.00 0.00 0.00
PRELIMINARIES
Testing of windows for watertightness
Each window shall be tested for watertightness with water sprayed on using adequate pressure. If in the opinion of the engineer, the pressure proves to be inadequate, then the pressure shall be boosted by means of
PRELIMINARIES
Revenue Stamps
The Contractor must allow for and provide all necessary revenue stamps require.
1 25 239 Item 1 0.00 0.00 0.00
1 25 240 Item 1 0.00 0.00 0.00
PRELIMINARIES
Proprietary Branded Products.
The Contractor shall take delivery of, handle, store, use, apply and/or fix all proprietary branded products in strict accordance with the manufacturers' instructions after consultation with the manufacturer's authorised r
PRELIMINARIES
Non-Cession of Monies
The Contractor shall not cede nor assign his rights or claims to any monies due or to become due under this contract.
1 25 241 Item 1 0.00 0.00 0.00
1 25 242 Item 1 0.00 0.00 0.00
PRELIMINARIES
As Built Drawings
The position of construction breaks and the extent of individual concrete pours are to be recorded by the Contractor on the Structural Engineer's drawings and are to be submitted to the Architect and the Structural Engineer for their
PRELIMINARIES
Social Security
The contractor shall provide for and effect Social Security for all his/her employees on the works in respect of the Social Security Act and will also instruct all his sub-contractors to do the same.
1 26 243 Item 1 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
PRELIMINARIES
nt of Namibian People
The contractor is encouraged to employ Namibian citizens for skilled and semi skilled artisans and employ unskilled labour from the area of interventions.
All Namibian skilled artisans and Namibian unskilled employees a
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Making good damaged work:
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 1 m³ 241 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 2 No. 32 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
Steps and pavers
ALTERATIONS
Taking out and removing doors, screen gates, etc including thresholds, sills, etc in one brick walls including making good cement plaster and paintwork on both sides:
ALTERATIONS
Steel screen gate and frame 813 x 2031mm high overall from one brickwall.
2 32 0.00 0.00 0.00
2 32 3 No. 105 0.00 0.00 0.00
2 32 4 No. 4 0.00 0.00 0.00
2 32 5 No. 4 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 6 m² 82 0.00 0.00 0.00
2 32 7 m² 3178 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 8 m 2457 0.00 0.00 0.00
ALTERATIONS
Taking out and removing doors, windows, etc from one brickwall (windows to be set aside for re-use):
ALTERATIONS
single door 813 x 2,031mm high overall from one brickwall.
ALTERATIONS
Glazed steel windows 540 x 640mm high from one prefab partition.
ALTERATIONS
Glazed steel window 540 X 640mm high from one brick wall.
ALTERATIONS
Taking down and removing roofs, floors, panelling, ceilings, partitions, etc:
ALTERATIONS
0.5mm IBR profile metal ceiling, including 50 x 50 x 3mm angle iron cornices, steel purlins/brandering etc.
ALTERATIONS
Nailed up celotex ceilings.
ALTERATIONS
Taking out and removing sundry joinery work:
ALTERATIONS
Timber cornices from brickwork.
2 32 9 No. 69 0.00 0.00 0.00
2 32 10 m 3075 0.00 0.00 0.00
2 32 11 No. 55 0.00 0.00 0.00
2 33 12 m 4946 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 13 m² 3756 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 14 No. 108 0.00 0.00 0.00
2 33 15 No. 55 0.00 0.00 0.00
2 33 16 No. 50 0.00 0.00 0.00
ALTERATIONS
'Flortime' pinning board model 2300 code: '2309', size 2,400 x 1,200mm.
ALTERATIONS
22 x 150mm bumper rail.
ALTERATIONS
Timber single door 813 x 2,031mm high overall from half brickwall.
ALTERATIONS
Timber skirtings from brickwork.
ALTERATIONS
Taking up and removing vinyl floor coverings, carpeting, etc:
ALTERATIONS
Vinyl tile floor covering including preparing screed for new ceramic floor tiles.
ALTERATIONS
Taking out and removing ironmongery:
ALTERATIONS
Mortice lock and striking plate from steel door and steel frame.
ALTERATIONS
lock and striking plate from timber door and steel frame.
ALTERATIONS
Green writing board and chalk rail 1,800 x 1,200mm high.
2 33 0.00 0.00 0.00
2 33 17 m² 272 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 18 m² 6917 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 19 m² 264 0.00 0.00 0.00
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and preparing surfaces for new screeds, plaster, etc:
ALTERATIONS
Plasters from walls or columns in patches.
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and bush hummering surfaces to receive new screeds, plaster, etc:
ALTERATIONS
50mm Screed from floors (internal and external).
ALTERATIONS
Hacking up/off and removing ceramic tile floor and wall finishes including removing mortar bed or backing and preparing concrete or brick surfaces for new screed, plaster or tile finishes:
ALTERATIONS
300 x 300mm Tiles to floors.
2 34 0.00 0.00 0.00
2 34 20 No. 78 0.00 0.00 0.00
2 34 21 No. 22 0.00 0.00 0.00
2 34 22 No. 14 0.00 0.00 0.00
2 34 23 No. 14 0.00 0.00 0.00
2 34 24 No. 12 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 25 m² 87 0.00 0.00 0.00
2 34 0.00 0.00 0.00
ALTERATIONS
Taking out and removing piping, sanitary fittings, etc including disconnecting piping from fittings and making good floor and wall finishes (making good tiling and paintwork elsewhere):
ALTERATIONS
Broken polyethylene low level WC.
ALTERATIONS
Broken vitreous china WHB
ALTERATIONS
Broken stainless steel WHB
ALTERATIONS
Broken vitreous china Urinal
ALTERATIONS
Vitreous china drop-in sink.
ALTERATIONS
Taking out and removing broken glass from windows/door panes and mirrors:
ALTERATIONS
Broken glass from steel windows including cleaning out rebates and preparing for new glass.
ALTERATIONS
Charts and learning material on walls
2 34 26 Item 4 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 27 No. 5 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 28 m² 62 0.00 0.00 0.00
2 35 29 m² 20 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Allow for removal of learning charts and material ( and putting back thereafter), from walls and pinning boards so as to expose surfaces to be painted.
ALTERATIONS
Taking out and removing sanitary fittings:
ALTERATIONS
Vitreous china drop-in sink.
ALTERATIONS
BUILDING UP OPENINGS
ALTERATIONS
Brickwork in cement bricks [7 Mpa] in class I mortar in building up:
ALTERATIONS
One brick walls.
ALTERATIONS
Half brick walls.
ALTERATIONS
MAKING GOOD OF FINISHES, ETC.
ALTERATIONS
Making good existing metal ceilings:
2 35 30 m² 3122 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 31 m² 182 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 32 m² 463 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 33 m² 184 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Clean ceilings from any organic matters and dirts, apply disinfenctants and pests poison in the roof space before installing ceiling, make good on completion, taking utmost care not to damage the ceilings.
ALTERATIONS
Making good 300 x 300mm ceramic floor tiles:
ALTERATIONS
Floors in patches.
ALTERATIONS
Making good 300 x 300mm vinyl floor tiles:
ALTERATIONS
Floors in patches.
ALTERATIONS
Making good external bagged finish to cement plaster:
ALTERATIONS
Walls in patches.
ALTERATIONS
REMEDIAL WORKS
ALTERATIONS
Roof timber rafters:
2 35 34 m 102 0.00 0.00 0.00
2 35 35 m 89 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
ALTERATIONS
Replace broken or missing eaves purlin with 50 x 76mm wrot softwood purlin, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
Reinforcing the exiting timber tie beam size114 x 38mm wrot softwood complete with rafter feets, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
ROOF LEAKS REPAIRS AND SEALING
ALTERATIONS
Inspect, re-fastened, replace missing screws, and seal roof screws, gaps, overlaps, holes, flashings, etc with 'Klodek Glass fibre fabric with two coats of sealant' where necessary to leave in perfect waterproof condition on completion:
2 36 36 m² 6402 0.00 0.00 0.00
2 36 37 m² 1112 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 38 m² 456 0.00 0.00 0.00
2 36 39 m² 141 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
ALTERATIONS
On existing IBR roof covering.
ALTERATIONS
On existing corrugated Fibre Cement roof.
ALTERATIONS
PLASTER REPAIRS
ALTERATIONS
Prepare and apply 3 to 1 plaster admixture as described
ALTERATIONS
On brick walls
ALTERATIONS
On narrow widths
ALTERATIONS
CRACK REPAIRS
ALTERATIONS
Supplementary preamble:
ALTERATIONS
All plaster repair admixtures are to be applied strictly in accordance with the "abe Construction Chemicals" or similar approved requirements. Break out all loose and hollow plaster at least 20 mm wide all around loose plaster area, brush clean of all loo
ALTERATIONS
All work is deemed to be in patches and prices are to include therefor.
ALTERATIONS
Measurement and payment is to be per metre of crack.
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 40 On walls m 437 0.00 0.00 0.00
2 37 0.00 0.00 0.00
2 37 0.00 0.00 0.00
ALTERATIONS
Repair crack in plastered walls by hacking off existing plaster to 300mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'epidermix'/ 'mendell 90' or similar approved crack repair product, cover with 13mm c
ALTERATIONS
Repairs to cracked plaster surfaces as noted above:
ALTERATIONS
ALTERATIONS
Repair crack in screeded floors by hacking off the existing screed to expose the concrete surface, 200mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'abe epidermix 344' or similar approved 'wet to dry'
ALTERATIONS
Repairs to cracked floors as noted above:
2 37 41 m 312 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 1 m³ 579 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 2 Soft rock. m³ 34 0.00 0.00 0.00
2 39 3 Hard rock. m³ 19 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 4 m² 890 0.00 0.00 0.00
2 39 0.00 0.00 0.00
ALTERATIONS
On concrete floors
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKS
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
CARTING AWAY.
2 39 0.00 0.00 0.00
2 39 5 m³ 579 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 6 m³ 965 0.00 0.00 0.00
2 40 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Surface Preparation:
2 40 7 m² 1666 0.00 0.00 0.00
2 40 GABIONS 0.00 0.00 0.00
2 40 0.00 0.00 0.00
2 40 8 No. 120 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of natural ground and/or excavated surfaces to receive concrete surface beds, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum dens
EARTHWORKS
EARTHWORKS
Gabions of galvanised wire boxes laced together and filled with broken stone:
EARTHWORKS
Allens meshco galvanised 80 x 100mm gabion mesh baskets, size 2000 x 500 x 500mm high, manufactured in accordance with SANS 1580:2005, baskets filled with medium sized stones, to form a1000mm thick retaining wall.(boxes to be properly bonded).
2 40 0.00 0.00 0.00
2 40 0.00 0.00 0.00
2 40 9 m² 1666 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
EARTHWORKS
SOIL POISONING
EARTHWORKS
Approved brand of anti-termite soil poison mixed with weedkiller applied by a Registered Pest Control company and guaranteed against termite infestation for ten years, strictly according to manufacturer's instructions:
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
2 42 0.00 0.00 0.00
2 42 1 m³ 638 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 2 Sets 51 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 3 m² 4246 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with power float:
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls and currents.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
2 42 4 m 2136 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 5 m 2136 0.00 0.00 0.00
2 43 0.00 0.00 0.00
2 43 0.00 0.00 0.00
2 43 6 m² 4614 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT (PROVISIONAL)
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00 2 MASONRY 45 Pointing: 0.00 0.00 0.00
SUPPLEMENTARY PREAMBLESBRICKWORKBrick reinforcements:
The brickwork reinforcements have been measured on every course in foundations brickworks, every third course in superstructure brickwork, and every course in the beamfilling brickwork.Sizes in descriptions:
Where sizes in descriptions are given in brick units, 'one brick' shall represent the length and 'half brick' the width of a brick.Hollow walls etc:
Descriptions of hollow walls shall be deemed to include leaving every fifth perpend of the bottom course of the external skin open as a weep hole.
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 1 m 14 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 2 No. 91 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 3 m 289 0.00 0.00 0.00
2 MASONRY 46 4 m 60 0.00 0.00 0.00
2 MASONRY 46 0.00 0.00 0.00
Descriptions of recessed pointing to fair face brickwork and face brickwork shall be deemed to include square recessed, hollow recessed, weathered pointing, etc.Prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.Galvanised hoop iron cramps, ties, etc:30 x 1,6mm Wall tie 500mm long with one end cast into concrete and other end built into brickwork.Brickwork reinforcement:
150mm Wide reinforcement built in horizontally.75mm Wide reinforcement built in horizontally.BRICKWORK SUNDRIES
2 MASONRY 46 0.00 0.00 0.00
2 MASONRY 46 5 m² 90 0.00 0.00 0.00
2 MASONRY 46 6 m² 60 0.00 0.00 0.00
2 MASONRY 46 0.00 0.00 0.00
2 MASONRY 46 7 m² 30 0.00 0.00 0.00
2 MASONRY 46 8 m² 18 0.00 0.00 0.00
2 MASONRY 46 0.00 0.00 0.00
2 MASONRY 46 9 m 75 0.00 0.00 0.00
2 MASONRY 46 10 m 60 0.00 0.00 0.00
Cement wash of 1:3 liquid cement and sand mixture applied with a brush, on previously cement washed surfaces:On brick surfaces.
On concrete surfaces including removing fins, irregularities,etc.Cement wash of 1:3 liquid cement and sand mixture applied with a brush, on new surfaces:On brick surfaces.
On concrete surfaces including removing fins, irregularities,etc.Brickwork reinforcement:
150mm Wide reinforcement built in horizontally.75mm Wide reinforcement built in horizontally.
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 1 m 356 0.00 0.00 0.00
2 48 SKIRTINGS 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 2 m 540 0.00 0.00 0.00
2 48 0.00 0.00 0.00
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
EAVES, VERGES, ETC
CARPENTRY AND JOINERY
Everite FC77 pressed fibre-cement:
CARPENTRY AND JOINERY
255 x 6mm Fascias and barge boards including galvanised stell H-profile jointing strips, screwed on to edges of existing timber trusses, rafters and purlins.
CARPENTRY AND JOINERYCARPENTRY AND JOINERY
Wrought supawood:
CARPENTRY AND JOINERY
75 x 22mm Skirting nailed.
CARPENTRY AND JOINERY
SEMI SOLID CORE FLUSH DOORS
2 48 0.00 0.00 0.00
2 48 3 No. 55 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 4 m 3075 0.00 0.00 0.00
2 48 5 m 4718 0.00 0.00 0.00
2 49 0.00 0.00 0.00
2 49 0.00 0.00 0.00
2 49 0.00 0.00 0.00
CARPENTRY AND JOINERY
Semi-solid flush doors with 3,2mm standard hardboard covering on both sides hung to steel frames:
CARPENTRY AND JOINERY
40mm Door 813 x 2,032mm high.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought ' supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
METAL NAILED UP AND SCREW UP CEILINGS (CPAP Work Group No 126)
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm IBR profile metal ceiling in single lengths fixed to steel purlins/branderings or rails:
2 49 1 m² 3261 0.00 0.00 0.00
2 49 2 No. 13 0.00 0.00 0.00
2 49 0.00 0.00 0.00
2 49 3 m 2483 0.00 0.00 0.00
2 49 4 m 4718 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
including 75 x 50 x 20 x 2.5mm lipped channel brandering at 1250mm centres bolted to and including 50 x 50 x 5mm L-shaped cleat 50mm long..
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 3mm angle section framing covered with 0.5mm thick IBR profile sheeting fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
Narrow and broad flute closure 150mm girth to suite the IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 1 No. 33 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 2 No. 104 0.00 0.00 0.00
2 50 3 No. 78 0.00 0.00 0.00
2 50 4 No. 70 0.00 0.00 0.00
2 50 LOCKS 0.00 0.00 0.00
2 50 0.00 0.00 0.00
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
HINGES, FLOOR SPRING HINGES, BOLTS, PANIC BOLTS, ETC
IRONMONGERY
Flush barrel bolts in Solid or similar approved:
IRONMONGERY
500 x 32mm Satin chrome on brass flush barrel bolt with keep let into concrete.
IRONMONGERY
CATCHES, CABIN HOOKS, ETC
IRONMONGERY
Union or similar approved:
IRONMONGERY
Approved standard window catch.
IRONMONGERY
Approved standard window stay.
IRONMONGERY
Approved standard window handle.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
2 50 5 No. 160 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 6 No. 39 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 7 No. 70 0.00 0.00 0.00
2 51 8 No. 70 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 9 No. 10 0.00 0.00 0.00
2 51 10 No. 8 0.00 0.00 0.00
2 51 Approved: 0.00 0.00 0.00
2 51 11 No. 57 0.00 0.00 0.00
2 51 SUNDRIES 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 12 No. 160 0.00 0.00 0.00
IRONMONGERY
'Blesbok' Art 460/312 four lever lockset.
IRONMONGERY
LOCKS, HANDLES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
'Blesbok' Art 460/312 four lever lockset complete with a pair of handles.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
Anodised aluminium plate with male or female symbol.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Chairman Industries or simmilar approved:
IRONMONGERY
DL2 Stainless steel side grab rail.
IRONMONGERY
SR2 Stainless steel backgrab rail.
IRONMONGERY
IRONMONGERY
Chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Dclsa or similar approved:
IRONMONGERY
Code 140/83 satin chrome plated floor mounted door stop.
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 13 No. 138 0.00 0.00 0.00
2 51 14 No. 126 0.00 0.00 0.00
2 52 15 No. 20 0.00 0.00 0.00
2 52 16 No. 26 0.00 0.00 0.00
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or other approved:
IRONMONGERY
Vitrex pinning board model 2300 code: 2309, 2,400 x 1,200mm high plugged.
IRONMONGERY
Vitrex pinning board model 2300 code: 2315, 1,000 x 1,200mm high plugged.
IRONMONGERY
2,700mm x 5mm Thick chalk rail plugged to existing writing board.
IRONMONGERY
Green vitreous enamelled chalkboard with magnetic steel surface, non reflective to comply with SABS. Specification CKS-36-1980 2,700 x 1440mm high complete with aluminium chalk rail plugged to wall with standard fixing brackets.
2 54 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 1 Kg 7387 0.00 0.00 0.00
2 54 2 Kg 2175 0.00 0.00 0.00
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
SUNDRY STEELWORK
METALWORK
Corner protectors:
METALWORK
50 x 50 x 5mm Angle section corner protectors in varying lengths with 3 x 30mm flat section bent lugs each 200mm girth welded on at 400mm centres including embedding in concrete.
METALWORK
25 x 25 x 3mm Angle section corner protectors in varying lengths with 3 x 30mm flat section bent lugs each 200mm girth welded on at 400mm centres including embedding in concrete.
2 54 3 No. 196 0.00 0.00 0.00
2 54 4 No. 196 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 5 No. 38 0.00 0.00 0.00
2 54 6 No. 131 0.00 0.00 0.00
METALWORK
Extra over 50 x 50 x 5mm for mitred L-intersection.
METALWORK
Extra over 25 x 25 x 3mm for mitred L-intersection.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
The following in purpose made screens, frames, and gates, etc:
METALWORK
Purpose made single security gate 813 x 2,032mm high overall, formed of 38 x 76 x 2.5mm mild steel square hollow section perimeter framing and two centre transoms forming top and bottom openings, each filled in with 'Mentix Flattex Code No. 341' expanded
METALWORK
Extra on 40 x 76 x 3mm hollow section framing for mitred angle intersection.
2 55 7 No. 131 0.00 0.00 0.00
2 55 8 m 173 0.00 0.00 0.00
2 55 9 Kg 44 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 10 No. 32 0.00 0.00 0.00
2 55 0.00 0.00 0.00
METALWORK
10mm Diameter loose bolt type expanding bolt as 'Rawbolt M10 75L', including mortice in brickwork and bolt up tight.
METALWORK
Purpose made gate frame consisting of 40 x 76 x 3mm square hollow section bolted to brickwork with bolts (bolts elsewhere measured).
METALWORK
10mm M10 Bolts.
METALWORK
Screens and gates:
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
2 55 0.00 0.00 0.00
2 55 11 No. 4 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 12 No. 161 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 SCREEDS 0.00 0.00 0.00
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 813 x 2,032mm high.
METALWORK
Standard ' Wispeco' or similar approved chawl doors with back panel:
METALWORK
Door 813 x 2,032mm high complete with back panel, hang to existing door frame.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
2 57 0.00 0.00 0.00
2 57 1 m² 6917 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 2 On walls. m² 98 0.00 0.00 0.00
2 57 3 m² 15 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 4 On walls. m² 123 0.00 0.00 0.00
2 57 5 m² 15 0.00 0.00 0.00
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake or similar approved floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.(internal and external)
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
2 TILING 58 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 1 m 1655 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.NOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.CERAMIC WALL TILING
Allow a PC sum of N$ 180.00 per m2 for purchasing and delivery of 200 x 200 wall tiles fixed with adhesive to and including 20mm plaster bedding on concrete and flush pointed with tinted waterproof jointing compound:
2 TILING 58 2 m² 340 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 3 m² 246 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 0.00 0.00 0.00
2 TILING 58 4 m² 4104 0.00 0.00 0.00
2 TILING 58 5 No. 57 0.00 0.00 0.00
2 TILING 59 6 m 1655 0.00 0.00 0.00
On walls in isolated panels, splashbacks, etc.
Allow a PC sum of N$ 200.00 per m2 for purchasing and delivery of 300 x 300 wall tiles fixed with adhesive to and including 20mm plaster bedding on concrete and flush pointed with tinted waterproof jointing compound:On walls, isolated panels, splashbacks, etc.CERAMIC FLOOR TILING
Allow a PC sum of N$ 280 per m2 for the purchase and delivery of 300 x 300 x 6mm full-body ceramic floor tiles fixed with adhesive on 25mm screed bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors and landings.Circular cutting.100mm high cut tile skirting.
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
SUPPLEMENTARY PREAMBLES
PLUMBING AND DRAINAGE
uPVC pressure pipes and fittings:
PLUMBING AND DRAINAGE
Pipes for water supply shall be of the class stated.
PLUMBING AND DRAINAGE
Pipes of 40mm diameter and smaller shall be plain ended with solvent welded uPVC loose sockets and fittings.
PLUMBING AND DRAINAGE
Pipes of 50mm diameter and greater shall have sockets and spigots with push-in type integral rubber ring joints. Bends shall be uPVC and all other fittings shall be cast iron, all with similar push-in type joints.
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Copper pipes:
PLUMBING AND DRAINAGE
Pipes shall be hard drawn and half-hard pipes of the class stated. Class 0 (thin walled hard drawn) pipes shall not be bent. Class 1 (thin walled half-hard), class 2 (half-hard) and class 3 (heavy walled half-hard) pipes shall only be bent with benders wi
PLUMBING AND DRAINAGE
All GMS underground pipes to receive 'Densotape'.
PLUMBING AND DRAINAGE
Fixing of pipes:
PLUMBING AND DRAINAGE
Unless specifically otherwise stated, descriptions of pipes shall be deemed to include for fixing to walls etc. casting in, building in or suspending not exceeding 1m below suspension level
PLUMBING AND DRAINAGE
Galvanised mild steel pipes:
PLUMBING AND DRAINAGE
Reducing fittings:
2 61 0.00 0.00 0.00
2 62 Flush pans: 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Where fittings have reducing ends or branches they are described as 'reducing'. In the case of pipes with diameters not exceeding 60mm only the largest end or branch size is given. Should the Contractor wish to use other fittings and bushes or reducers he
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Flush pans shall have straight or side outlets and 'P' or 'S' traps as necessary.
PLUMBING AND DRAINAGE
Exposed concrete surfaces:
PLUMBING AND DRAINAGE
Where no manufacturers' instructions exist pipes shall be laid in accordance with clauses 5.1 and 5.2 of each of the following: SABS 1200 L : Medium pressure pipelines LD : Sewers LE : Stormwater drainage Pipe trenches etc shall be backfilled in accord
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Exposed surfaces of concrete stormwater channels, cover slabs, inspection eye marker slabs, gulley tops, cleaning eye tops, catchpits, inspection chambers, etc shall be finished smooth with plaster.
PLUMBING AND DRAINAGE
Excavations:
PLUMBING AND DRAINAGE
No claim for rock excavation will be entertained unless the Contractor has timeously notified the quantity surveyor thereof prior to backfilling.
PLUMBING AND DRAINAGE
Laying, backfilling, bedding, etc of pipes:
PLUMBING AND DRAINAGE
Pipes shall be laid and bedded and trenches shall be carefully backfilled in accordance with manufacturers' instructions.
PLUMBING AND DRAINAGE
Stainless steel basins, sinks, wash troughs, urinals, etc:
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 1 No. 36 0.00 0.00 0.00
2 62 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Units shall have standard aprons on all exposed edges and tiling keys against walls where applicable.
PLUMBING AND DRAINAGE
Waste unions:
PLUMBING AND DRAINAGE
Descriptions of waste unions shall be deemed to include rubber or vulcanite plugs and chains fixed to fittings.
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover and 6l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china wash hand basins and pedestals:
2 62 2 No. 22 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 3 No. 17 0.00 0.00 0.00
2 63 0.00 0.00 0.00
PLUMBING AND DRAINAGE
510 x 405mm 'Hibiscus' white vitreous china lavatory basin (product code 7050) with two tapholes including integrated overflow and chainstay hole.
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china drop-in vanity basins:
PLUMBING AND DRAINAGE
520 x 440mm 'Azalea' white vitreous china semi drop-in vanity basin (product code 7021) with one taphole including integrated overflow and chainstay hole, fitted into recess in vanity top (elsewhere measured) on and including two fixing brackets (product
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china WC suites:
2 63 4 No. 17 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 5 No. 14 0.00 0.00 0.00
2 63 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Klip' white vitreous china low volume low level WC with double flap heavy duty plastic seat cover and matching 6 litre cistern with flush pipe including fitments, etc., bedded in 4:1 cement mortar on concrete floors
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china urinals:
PLUMBING AND DRAINAGE
'Flatback' white vitreous china wall mounted urinal (product code 7053) including 38mm chromium plated domical grating (product code 8787Z0) and chromium plated top inlet spreader (product code 8543) and including exposed flush valve, fitted on and includ
PLUMBING AND DRAINAGE
'Franke (t/a Citimetal)' grade 304 (18/10) 1,2mm thick stainless steel wash hand basins:
2 63 6 No. 14 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 7 No. 14 0.00 0.00 0.00
2 63 TRAPS ETC 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 8 No. 47 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Franke Oval A' wash hand basin size 420 x 340mm with pressed bowl , two tapholes , 100mm radius apron and 50mm high splashback, four times bolted to wall with M8 expansion bolts.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved waste unions etc:
PLUMBING AND DRAINAGE
75mm diameter Chrome plated shower/fountain grating (code 323).
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved traps etc:
PLUMBING AND DRAINAGE
40mm Rough brass medium seal sink 'P' trap, with FI outlet and cleaning eye (code VA2.360).
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' Star crutch handle, elbow action and lockshield bibtaps:
2 64 9 No. 9 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 10 No. 38 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 11 m 60 0.00 0.00 0.00
2 64 12 m 29 0.00 0.00 0.00
2 64 13 m 35 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 14 No. 35 0.00 0.00 0.00
2 64 15 No. 14 0.00 0.00 0.00
2 64 16 No. 9 0.00 0.00 0.00
2 64 17 No. 15 0.00 0.00 0.00
PLUMBING AND DRAINAGE
15mm Star Chrome plated foot operated hose bibtap with 20mm BSP thread on outlet (code 507-21).
PLUMBING AND DRAINAGE
'Cobra Watertech Tudor Collection' tap and mixer fittings:
PLUMBING AND DRAINAGE
Code TD-294CP chrome plated single taphole basin mixer with fixed spout, plug and chain and flexible connection tubes.
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class 10 HDPE pipes:
PLUMBING AND DRAINAGE
22mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
63mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over HDPE pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
32mm Reducer.
PLUMBING AND DRAINAGE
32mm Bend.
PLUMBING AND DRAINAGE
63mm Bend.
2 64 18 32mm Tee. No. 10 0.00 0.00 0.00
2 65 19 No. 7 0.00 0.00 0.00
2 65 20 No. 6 0.00 0.00 0.00
2 65 21 No. 6 0.00 0.00 0.00
2 65 22 No. 10 0.00 0.00 0.00
2 65 23 No. 4 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 24 m 60 0.00 0.00 0.00
2 65 25 m 15 0.00 0.00 0.00
2 65 26 m 24 0.00 0.00 0.00
2 65 27 m 32 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 28 No. 23 0.00 0.00 0.00
2 65 29 No. 20 0.00 0.00 0.00
2 65 Sundries: 0.00 0.00 0.00
2 65 30 No. 30 0.00 0.00 0.00
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
32 x 32 x 22mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 32 x 22mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 63 x 32mm Reducing tee.
PLUMBING AND DRAINAGE
32mm Adaptor coupling.
PLUMBING AND DRAINAGE
63mm Adaptor coupling.
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Extra for connecting 22mm Coper pipe to 25mm HDPE pipe including all neccessary fittings, etc.
2 66 31 No. 13 0.00 0.00 0.00
2 66 32 Item 5 0.00 0.00 0.00
2 66 TESTING 0.00 0.00 0.00
2 66 Testing: 0.00 0.00 0.00
2 66 33 Item 5 0.00 0.00 0.00
2 66 34 Item 5 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 35 No. 45 0.00 0.00 0.00
PLUMBING AND DRAINAGE
225 x 225mm Cast iron stopcock box including brick chamber below not exceeding 500mm deep internally.
PLUMBING AND DRAINAGE
excavate and connect the new 32mm HDPE water supply pipe to existing municipal water line including all labour and materials to execute the connection.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
Testing drainage pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
'Chubb' or similar approved:
PLUMBING AND DRAINAGE
'Everyway' hose reel complete with 30m plastic hose, chromium plated stopcock, shut-off nozzle and wall bracket.
2 66 36 No. 66 0.00 0.00 0.00
2 66 37 No. 36 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 38 No. 3 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 39 m 360 0.00 0.00 0.00
PLUMBING AND DRAINAGE
9kg Rechargeable dry chemical fire extinguisher complete with initial charge painted backing board plugged and screwed to plastered or tiled brick wall.
PLUMBING AND DRAINAGE
80 x 65mm Brass hydrant booster connection with cap and chain.
PLUMBING AND DRAINAGE
Fire hydrant pedestals:
PLUMBING AND DRAINAGE
Unreinforced concrete hydrant pedestals 900mm high cast around vertical pipe with bottom 300mm below ground, 300 x 300mm square at base and tapering to octagonal shaped top 200 x 200mm overall including necessary excavation, formwork and two coats of pain
PLUMBING AND DRAINAGE
WATER SUPPLIES TO FIRE APPLIANCES
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
2 67 0.00 0.00 0.00
2 67 40 m 18 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 41 m 48 0.00 0.00 0.00
2 67 42 m 96 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 43 No. 48 0.00 0.00 0.00
2 67 44 No. 30 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 45 m 209 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra over class 10 HDPE Type 4 pressure pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
32mm Fittings.
PLUMBING AND DRAINAGE
Galvanised steel pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches not exceeding 1m.
PLUMBING AND DRAINAGE
32mm Pipes.
PLUMBING AND DRAINAGE
Extra over galvanised steel pipes for steel Fittings:
PLUMBING AND DRAINAGE
25mm Fittings
PLUMBING AND DRAINAGE
32mm Fittings
PLUMBING AND DRAINAGE
STORM WATER, SOIL WATER, AND WATER SYSTEMS REPAIRS
PLUMBING AND DRAINAGE
Clean, unblock, seal leakages and where applicable repair or replace part of or entire system or sub-systems to restore service:
PLUMBING AND DRAINAGE
Soilwater system, including inspection chambers, rodding eyes, vents, etc.
2 67 46 m 308 0.00 0.00 0.00
2 67 SLEEVES 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 47 No. 129 0.00 0.00 0.00
2 68 0.00 0.00 0.00
2 68 48 No. 84 0.00 0.00 0.00
2 70 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Water reticulation system, including fire protection sub-system, valves, connections, pipe replacement, etc
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Plastic sleeves for pipes not exceeding 100mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
PLUMBING AND DRAINAGE
Plastic sleeves for pipes exceeding 100mm and not exceeding 200mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 70 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 1 No. 6 0.00 0.00 0.00
2 70 2 No. 48 0.00 0.00 0.00
2 70 3 No. 32 0.00 0.00 0.00
2 70 4 m³ 40 0.00 0.00 0.00
2 70 5 Item 1 0.00 0.00 0.00
2 70 6 Item 1 0.00 0.00 0.00
ELECTRICAL WORK
ELECTRICAL RETICULATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections
ELECTRICAL WORK
Replace 1G1/2W switches weatherproof
ELECTRICAL WORK
Replace SSO
ELECTRICAL WORK
Rewire fitting or circuit to distribution board, excluding existing wiring or control gear
ELECTRICAL WORK
Excavation in hard rock conditions for cable trench (for new or exisiting cables, to 600mm deep)
ELECTRICAL WORK
Terminate / make safe / remove exisiting cabling or wires not in use
ELECTRICAL WORK
Conceal / make good exisiting cabling or wires on surface by grouping multiple wires and tying down ,conceal using metal trunking or conduits
2 70 0.00 0.00 0.00
2 70 7 No. 20 0.00 0.00 0.00
2 70 8 No. 136 0.00 0.00 0.00
2 71 9 No. 80 0.00 0.00 0.00
2 71 10 No. 60 0.00 0.00 0.00
2 71 11 No. 40 0.00 0.00 0.00
2 71 12 No. 40 0.00 0.00 0.00
2 71 13 No. 64 0.00 0.00 0.00
ELECTRICAL WORK
Take delivery and install luminaries or equipment supplied by others complete with lamps, connections, etc:
ELECTRICAL WORK
Flood light, mast / wall mounted, with HID lamp-make good replace lamp
ELECTRICAL WORK
Replace 36W fluorescent tubes
ELECTRICAL WORK
Make good 36/58/100W fluorescent light fitting, including re-fitting, replace starter and / or transformer
ELECTRICAL WORK
Replace 58W fluorescent tubes
ELECTRICAL WORK
Replace 100W fluorescent tubes
ELECTRICAL WORK
Replace external CFL's on external lights
ELECTRICAL WORK
Replace damaged 1500/1800mm with standard type C with 2 x 1200mm fittings complete with tubes
2 71 14 No. 32 0.00 0.00 0.00
2 71 0.00 0.00 0.00
2 71 0.00 0.00 0.00
2 71 15 No. 4 0.00 0.00 0.00
2 71 16 No. 5 0.00 0.00 0.00
2 71 17 No. 5 0.00 0.00 0.00
2 71 18 No. 1 0.00 0.00 0.00
2 71 19 No. 5 0.00 0.00 0.00
2 72 20 No. 4 0.00 0.00 0.00
2 72 21 No. 5 0.00 0.00 0.00
ELECTRICAL WORK
Replace wall mounted light fitting as 'Lascon" B20 or similar approved and bulb 2PL9 bulbs (B)
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations the distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock.
ELECTRICAL WORK
Distribution board build into wall.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
16A Single pole circuit breaker.
ELECTRICAL WORK
40A Single pole circuit breaker.
ELECTRICAL WORK
16A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
2 72 22 No. 1 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 23 No. 3 0.00 0.00 0.00
2 72 24 No. 2 0.00 0.00 0.00
2 72 25 No. 2 0.00 0.00 0.00
2 72 CABLES 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 26 m 140 0.00 0.00 0.00
2 72 27 m 140 0.00 0.00 0.00
2 72 0.00 0.00 0.00
ELECTRICAL WORK
40A Single pole earth leakage.
ELECTRICAL WORK
Distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for four future circuit breakers, legend card, circuit breakers, fuses, relay, volt-meter, ammeter, transformer, earth leakage unit, time switch, etc.
ELECTRICAL WORK
10A Single pole circuit breaker
ELECTRICAL WORK
20A Double pole main switch isolator
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination
ELECTRICAL WORK
ELECTRICAL WORK
600/1000 V PVC/PVC/SWA/PVC copper cable laid in trenches (trenching and backfilling measured elsewhere)
ELECTRICAL WORK
10mm2 2-Core.
ELECTRICAL WORK
35mm2 4-Core.
ELECTRICAL WORK
V PVC/SWA/PVC copper cable pulled in cable sleeves (sleeves measured elsewhere).
2 72 28 m 30 0.00 0.00 0.00
2 72 29 m 20 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 30 No. 8 0.00 0.00 0.00
2 73 31 No. 2 0.00 0.00 0.00
2 73 32 No. 1 0.00 0.00 0.00
2 73 33 No. 140 0.00 0.00 0.00
2 73 EARTHING 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 34 m 88 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 35 No. 5 0.00 0.00 0.00
2 73 SLEEVES 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 36 m 26 0.00 0.00 0.00
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
16mm2 4-Core.
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
ELECTRICAL WORK
10mm2 2-Core.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
16mm2 4-Core.
ELECTRICAL WORK
35mm2 4-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere).
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
2 73 0.00 0.00 0.00
2 73 37 m 25 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 38 No. 8 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 39 m 10 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 40 m 8 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 41 No. 6 0.00 0.00 0.00
2 74 42 No. 11 0.00 0.00 0.00
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on PVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enamelled fixed onto conduit.
ELECTRICAL WORK
Round conduit box for 25mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
2 74 0.00 0.00 0.00
2 74 43 No. 2 0.00 0.00 0.00
2 74 44 No. 4 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 45 2.5mm². m 145 0.00 0.00 0.00
2 75 46 4mm². m 135 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 47 2.5mm². m 60 0.00 0.00 0.00
2 75 48 4mm². m 35 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 49 2.5mm². m 30 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 50 2.5mm2 m 50 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 51 No. 16 0.00 0.00 0.00
ELECTRICAL WORK
PVC type fixed onto conduit.
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORK
ELECTRICAL WORK
Bare stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORK
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
Bare stranded copper earth earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
16A One-lever one-way switch.
2 75 52 No. 10 0.00 0.00 0.00
2 75 53 No. 7 0.00 0.00 0.00
2 75 54 No. 17 0.00 0.00 0.00
2 75 55 SSO. No. 10 0.00 0.00 0.00
2 75 56 No. 14 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 57 No. 33 0.00 0.00 0.00
2 76 58 No. 17 0.00 0.00 0.00
2 76 59 No. 25 0.00 0.00 0.00
2 76 60 No. 22 0.00 0.00 0.00
ELECTRICAL WORK
16A Two-lever one-way switch.
ELECTRICAL WORK
1G1/2W weatherproof switches.
ELECTRICAL WORK
1G1/2W switches.
ELECTRICAL WORK
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with lamps, connections, etc., mounted in position
ELECTRICAL WORK
Wall mounted light fitting as 'Lascon' B10 or similar approved and bulb (B).
ELECTRICAL WORK
Ceiling mounted light fitting as 'Lascon' B10 or similar approved and bulb (A).
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light fitting and tubes (C).
ELECTRICAL WORK
Flood light, mast/wall mounted, with HID lamp.
2 76 0.00 0.00 0.00
2 76 61 No. 31 0.00 0.00 0.00
2 76 62 No. 46 0.00 0.00 0.00
2 76 63 No. 83 0.00 0.00 0.00
2 76 64 No. 51 0.00 0.00 0.00
2 76 65 No. 24 0.00 0.00 0.00
2 76 66 No. 54 0.00 0.00 0.00
2 77 67 No. 39 0.00 0.00 0.00
ELECTRICAL WORK
Relamp existing fittings and replace incandescent lamps with low energy compact flourescent lamps.
ELECTRICAL WORK
Wall mounted light fitting as 'Lascon' B20, or similar approved, and bulb 2PL9 bulbs (B).
ELECTRICAL WORK
Make good 36/58/100W fluorescent light fitting, including re-fitting, replace starter and / or transformer.
ELECTRICAL WORK
36W flourescent lamp.
ELECTRICAL WORK
58W flourescent lamp.
ELECTRICAL WORK
100W flourescent lamp.
ELECTRICAL WORK
Replace damaged 1500/1800mm with standard type C 2 x 1200mm fittings complete with tubes.
ELECTRICAL WORK
Replace external CFLs on external lights.
2 77 0.00 0.00 0.00
2 77 0.00 0.00 0.00
2 77 68 No. 7 0.00 0.00 0.00
2 77 69 Item 1 0.00 0.00 0.00
2 77 70 No. 5 0.00 0.00 0.00
2 77 SUNDRIES 0.00 0.00 0.00
2 77 71 No. 10 0.00 0.00 0.00
2 77 72 No. 3 0.00 0.00 0.00
2 77 73 Item 4 0.00 0.00 0.00
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations luminaries or equipment complete with lamps, connections, etc., mounted in position
ELECTRICAL WORK
Distribution board:
ELECTRICAL WORK
Wall mounted light fitting as 'Lascon' B10 or similar approved and bulb (B).
ELECTRICAL WORK
Clean kiosk(s) complete, remove cobwebs and dust ,check mechanical connections ,latch mechanisms,gaskets,replace if needed
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light fitting and tubes (C).
ELECTRICAL WORK
ELECTRICAL WORK
Replace 1G1/2W switches
ELECTRICAL WORK
Install bird cage on siren.
ELECTRICAL WORK
Decommision electricity and make safe.
2 77 74 No. 30 0.00 0.00 0.00
2 77 0.00 0.00 0.00
2 77 0.00 0.00 0.00
2 77 75 m 34 0.00 0.00 0.00
2 78 76 m 40 0.00 0.00 0.00
2 78 77 No. 11 0.00 0.00 0.00
ELECTRICAL WORK
Check and repair faulty power circuit, including control gear and insulation, phase rotation, wiring.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations conductors, etc.:
ELECTRICAL WORK
70mm² Bare stranded copper conductor drawn into conduiting including conduiting.
ELECTRICAL WORK
6mm² Bare stranded copper conductor drawn into conduiting including conduiting..
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
2 GLAZING 80 0.00 0.00 0.00
2 GLAZING 80 0.00 0.00 0.00
2 GLAZING 80 0.00 0.00 0.00
2 GLAZING 80 1 m² 8 0.00 0.00 0.00
2 GLAZING 80 2 m² 88 0.00 0.00 0.00
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.GLAZING TO STEEL WITH PUTTY4mm Clear float glass:Panes not exceeding 0,1 m2.
Panes exceeding 0,1m2 and not exceeding 0,5m2.
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
SUPPLEMENTARY PREAMBLES
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
PAINTWORK
All work to be executed in strict accordance with the specifications of Plascon Paints (Pty) Ltd. The coating systems are as per Plascon's 'List of Decorative Paint Products' unless otherwise specified. Full specifications are available on request from Pl
PAINTWORK
Primers and first coats may be thinned in accordance with the paint specifications of Plascon Paints (Pty) Ltd to aid the absorption of the paint.
PAINTWORK
All surfaces must be sound, clean and have a moisture content of less than 8% for walls generally and 3% for slabs/screeds etc.
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
PAINTWORK
Where surfaces of plaster etc are sandy / friable, the first coat must be replaced with 'Plascon Merit' plaster primer thinned 10% with turpentine.
PAINTWORK
All paints are to bear the SABS mark and are to be applied in strict accordance with manufacturer's instructions.
PAINTWORK
Prices for paintwork are to include for masking and protecting of all finished paintwork and all finished joinery, tiling, floor coverings, etc. during painting. Any damage to such finished work shall be removed, repaired or replaced at the Contractor's e
2 81 0.00 0.00 0.00
2 81 0.00 0.00 0.00
PAINTWORK
Prices for painting are to include for painting a one square metre sample panel of all finishing coats and for repeating if required. Only after written approval from Architect may finishing coats be applied.
PAINTWORK
Prices for all paintwork are to include all colours which have a value of 8 or higher on the Munsell system in accordance with the relevant SABS specification.
2 81 0.00 0.00 0.00
2 82 0.00 0.00 0.00
2 82 0.00 0.00 0.00
2 82 0.00 0.00 0.00
2 82 1 m² 106 0.00 0.00 0.00
2 82 2 m² 5 0.00 0.00 0.00
2 82 ON METAL 0.00 0.00 0.00
PAINTWORK
The Contractor shall provide all necessary dust sheets, covers, etc. required during painting. All door handles, locks and other ironmongery, pelmets, electrical switch and socket covers, etc. are to be removed before commencing the painting. All paint sp
PAINTWORK
PAINTWORK ETC TO NEW WORK
PAINTWORK
ON SMOOTH PLASTER
PAINTWORK
Prepare surfaces and remove all loose material, apply one coat 'Plascon Merit Plaster Primer' and two coats 'Plascon Polvin Super Acrylic' paint:
PAINTWORK
On interior walls.
PAINTWORK
On narrow widths.
PAINTWORK
2 82 0.00 0.00 0.00
2 82 3 m² 854 0.00 0.00 0.00
2 82 4 m² 486 0.00 0.00 0.00
2 82 5 m² 78 0.00 0.00 0.00
2 82 0.00 0.00 0.00
2 82 6 m² 3312 0.00 0.00 0.00
2 82 0.00 0.00 0.00
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
PAINTWORK
On corner protectors.
PAINTWORK
On doors, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On door frames.
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
PAINTWORK
On IBR metal ceilings (measured flat)
PAINTWORK
ON WOOD, WOOD BOARD
2 82 0.00 0.00 0.00
2 82 7 m² 183 0.00 0.00 0.00
2 83 8 m² 216 0.00 0.00 0.00
2 83 0.00 0.00 0.00
2 83 9 m² 156 0.00 0.00 0.00
2 83 10 m 8020 0.00 0.00 0.00
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Super Universal Enamel' paint:
PAINTWORK
On interior doors.
PAINTWORK
On narrow widths, (internal & external)
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer' or similar approved, one coat 'Plascon Merit Universal Undercoat' or similar approved and two coats 'Plascon Velvaglo Polyurethane Enamel' or similar approved pai
PAINTWORK
On interior fittings.
PAINTWORK
On interior skirtings, rails, etc not exceeding 300 mm girth.
2 83 0.00 0.00 0.00
2 83 11 m 160 0.00 0.00 0.00
2 83 0.00 0.00 0.00
2 83 0.00 0.00 0.00
2 83 0.00 0.00 0.00
2 83 12 m² 13621 0.00 0.00 0.00
2 83 13 m² 716 0.00 0.00 0.00
PAINTWORK
Stop, sand down and prepare wood surfaces and apply three coats 'Plascon Woodcare Exterior Wood Dressing' stained oil preservative:
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
PAINTWORK
PAINTWORK, ETC TO PREVIOUSLY PAINTED WORK
PAINTWORK
ON SMOOTH PLASTER
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On interior walls.
PAINTWORK
On interior walls in patterned multi-colours.
2 83 14 m 5212.1 0.00 0.00 0.00
2 83 15 m² 202 0.00 0.00 0.00
2 84 0.00 0.00 0.00
2 84 0.00 0.00 0.00
2 84 16 m² 294 0.00 0.00 0.00
2 84 17 m² 5585 0.00 0.00 0.00
2 84 18 m 1959 0.00 0.00 0.00
2 84 0.00 0.00 0.00
PAINTWORK
On interior walls in bands not exceeding 300mm girth.
PAINTWORK
On narrow widths, (internal & external)
PAINTWORK
ON TEXTURED PLASTER
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On exterior walls in patterned multi-colours.
PAINTWORK
On exterior walls.
PAINTWORK
On exterior mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
ON SMOOTH CONCRETE
2 84 0.00 0.00 0.00
2 84 19 m² 1020 0.00 0.00 0.00
2 84 0.00 0.00 0.00
2 84 0.00 0.00 0.00
2 84 20 m² 1112 0.00 0.00 0.00
2 85 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On ceilings and beams.
PAINTWORK
ON FIBRE-CEMENT, PLASTIC AND VINYL, ETC.
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse and apply two coats 'Plascon Wall and All Pure Acrylic' paint on existing water based paint surfaces:
PAINTWORK
On corrugated fibre cement roofing.
PAINTWORK
ON WOOD, WOOD BOARD, ETC
2 85 0.00 0.00 0.00
2 85 21 m² 74 0.00 0.00 0.00
2 85 0.00 0.00 0.00
2 85 22 m² 127 0.00 0.00 0.00
2 85 23 m² 98 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Su
PAINTWORK
On exterior roof timbers at eaves and verges.
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Super Universal Enamel' paint:
PAINTWORK
On interior doors.
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
2 85 0.00 0.00 0.00
2 85 24 m 5476 0.00 0.00 0.00
2 85 ON METAL 0.00 0.00 0.00
2 85 0.00 0.00 0.00
2 85 25 m² 257 0.00 0.00 0.00
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer' or similar approved, one coat 'Plascon Merit Universal Undercoat' or similar approved and two coats 'Plascon Velvaglo Polyurethane Enamel' or similar approved pai
PAINTWORK
On interior skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse, spot priming with 'Plascon Namelcote Synthetic Metal Primer' and apply one coat 'Plascon Merit Universal Undercoat'
PAINTWORK
On door frames.
2 85 26 m² 365 0.00 0.00 0.00
2 85 27 m² 136 0.00 0.00 0.00
2 86 28 m² 1204 0.00 0.00 0.00
2 86 29 m² 125 0.00 0.00 0.00
2 86 30 m² 12 0.00 0.00 0.00
2 86 31 m 230 0.00 0.00 0.00
2 86 32 m² 2 0.00 0.00 0.00
2 86 33 m² 311 0.00 0.00 0.00
PAINTWORK
On exterior steel roof members at eaves and verges.
PAINTWORK
On Green writing boards
PAINTWORK
On windows, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On interior/ exterior partitions in patterned multi-colours.
PAINTWORK
On Steel portal frame members.
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
PAINTWORK
On doors, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On IBR roof sheets.
2 86 0.00 0.00 0.00
2 86 34 m² 216 0.00 0.00 0.00
2 86 35 m² 3122 0.00 0.00 0.00
2 88 0.00 0.00 0.00
2 88 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse, spot priming with 'Plascon Namelcote Synthetic Metal Primer' and apply one coat 'Plascon Merit Universal Undercoat'
PAINTWORK
On windows, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On IBR metal ceilings.(measured flat)
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
SITE CLEARANCE, ETC.
2 88 0.00 0.00 0.00
2 88 1 m² 258 0.00 0.00 0.00
2 88 0.00 0.00 0.00
2 88 0.00 0.00 0.00
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required, stripping topsoil average 100mm and cart a
EXTERNAL WORKS
ROADWORK, PAVING, ETC
EXTERNAL WORKS
Precast concrete kerbs (30 Mpa) finished smooth on exposed surfaces including bedding, cutting, pointing and pointing and 20/19mm Mpa unreinforced concrete haunching at junctions:
2 88 2 m 286 0.00 0.00 0.00
2 88 3 m 256 0.00 0.00 0.00
2 88 4 m 178 0.00 0.00 0.00
2 88 5 m 110 0.00 0.00 0.00
EXTERNAL WORKS
Garden kerb 900 x 250 x 75mm high with twice chamfered edges with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc, circular on plan exceeding 4m radius.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
2 89 6 m 146 0.00 0.00 0.00
2 89 7 No. 48 0.00 0.00 0.00
2 89 8 No. 37 0.00 0.00 0.00
2 89 0.00 0.00 0.00
2 89 9 m³ 420 0.00 0.00 0.00
2 89 0.00 0.00 0.00
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc., circular on plan not exceeding 4m radius.
EXTERNAL WORKS
1,200mm Diameter 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
2,000 x 2,000 x 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
Open face excavation over sloping site:
EXTERNAL WORKS
Open face excavation to form platform under parking areas etc and carting away surplus material from site to a dumping site to be located by the contractor.
EXTERNAL WORKS
Extra over bulk excavation in earth for excavation in:
2 89 10 Soft rock m³ 5 0.00 0.00 0.00
2 89 11 Hard rock m³ 2 0.00 0.00 0.00
2 89 0.00 0.00 0.00
2 89 12 Brickwork. m³ 4 0.00 0.00 0.00
2 89 13 m³ 3 0.00 0.00 0.00
2 89 14 m³ 3 0.00 0.00 0.00
2 90 0.00 0.00 0.00
2 90 15 m³ 429 0.00 0.00 0.00
2 90 16 m³ 286 0.00 0.00 0.00
2 90 0.00 0.00 0.00
EXTERNAL WORKSEXTERNAL WORKS
EXTERNAL WORKS
Extra over bulk excavation in earth for breaking up and removing:
EXTERNAL WORKSEXTERNAL WORKS
Unreinforced concrete.
EXTERNAL WORKS
Reinforced concrete.
EXTERNAL WORKS
Earth filling supplied by the contractor under pavings etc:
EXTERNAL WORKS
Over site of G5 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Over site of G6 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Compaction of surfaces:
2 90 17 m² 1084 0.00 0.00 0.00
2 90 0.00 0.00 0.00
2 90 18 m² 1084 0.00 0.00 0.00
EXTERNAL WORKS
Compaction of ground surface under pavings etc. including scarifying for a depth of 150mm, breaking down oversize material, adding suitable material where necessary and compacting to 95 % Mod AASHTO density (materials to comply with CBR >25%)
EXTERNAL WORKS
Anti-termite soil poison and weedkiller:
EXTERNAL WORKS
Approved brands of weedkiller and termite poisoning mixed and applied in accordance with the manufacturer's instructions under pavings, etc.
2 90 0.00 0.00 0.00
2 90 19 m² 1084 0.00 0.00 0.00
2 90 0.00 0.00 0.00
2 90 20 m³ 170 0.00 0.00 0.00
2 90 0.00 0.00 0.00
2 90 21 m³ 25 0.00 0.00 0.00
2 91 0.00 0.00 0.00
2 91 22 m² 18 0.00 0.00 0.00
EXTERNAL WORKS
35Mpa standard grey double zig zag interlocking roadstone paving with open joints on and including 25mm thick river sand bed with sand and cement mixture swept into joints, hose down including bedding, jointing and pointing:
EXTERNAL WORKS
Paving in herring borne pattern bond with butt joints to falls.
EXTERNAL WORKS
Garden soil to planter:
EXTERNAL WORKS
Remove all building rubble and materials to 500mm depth and fill in with garden soil for grassing, planting, etc (Plant, grass, cost elsewhere measured).
EXTERNAL WORKS
Insitu concrete (25Mpa):
EXTERNAL WORKS
Toes and walls of walkways
EXTERNAL WORKS
Rough Formwork to:
EXTERNAL WORKS
Toes and walls of walkways.
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
EARTHWORKS
SUPPLIMENTARY PREAMBLE
EARTHWORKS
NATURE OF THE GROUND
EARTHWORKS
The nature of the ground is assumed to be loose sandy material, therefore "earth", but possibly interspersed with "hard rock" or "soft rock"
EARTHWORKS
SITE CLEARANCE, ETC.
EARTHWORKS
Site clearance, etc.:
3 95 1 m² 3670 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 2 Trenches. m³ 552 0.00 0.00 0.00
3 95 3 m³ 19 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 4 Soft rock. m³ 56 0.00 0.00 0.00
3 96 5 Hard rock. m³ 25 0.00 0.00 0.00
3 96 0.00 0.00 0.00
EARTHWORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKSEARTHWORKS
Compaction:
3 96 6 m² 552 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 7 m² 1656 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 8 m³ 175 0.00 0.00 0.00
3 96 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of excavated surfaces to receive concrete footings, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically Vibrated:
EARTHWORKS
In trenches, holes etc under strip foundations.
EARTHWORKS
CARTING AWAY.
3 96 0.00 0.00 0.00
3 96 9 m³ 187 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 10 m³ 239 0.00 0.00 0.00
3 96 11 m³ 122 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 12 m³ 132 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Backfilling to trenches, holes, etc.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
3 97 0.00 0.00 0.00
3 97 13 m³ 72 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 14 m² 804 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 15 Item 8 0.00 0.00 0.00
3 97 0.00 0.00 0.00
EARTHWORKS
Coarse river sand filling compacted to 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, etc.
EARTHWORKS
Surface Preparation:
EARTHWORKS
Trim and level off surface of natural ground surfaces to receive concrete paving, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
KEEPING EXCAVATIONS FREE OF WATER
EARTHWORKS
Keeping excavations free of water:
EARTHWORKS
Allow for keeping excavations free of water by hand or machinery.
EARTHWORKS
SOIL POISONING
3 97 0.00 0.00 0.00
3 97 16 m² 552 0.00 0.00 0.00
3 97 17 m² 1454 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 0.00 0.00 0.00
EARTHWORKS
Approved brands of weedkiller mixed with termite poison and applied in accordance with the manufacturer's instructions:
EARTHWORKS
To bottoms of trenches, etc.
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
3 99 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 1 Sets 84 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 2 m³ 142 0.00 0.00 0.00
3 99 3 m³ 100 0.00 0.00 0.00
3 99 4 m3 0.3 0.00 0.00 0.00
3 99 5 Slabs. m3 7.44 0.00 0.00 0.00
3 99 6 m3 5.66 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds cast in panels on waterproofing.
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds.
CONCRETE, FORMWORK AND REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 7 m³ 128 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 8 m3 4.8 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 9 m² 1449 0.00 0.00 0.00
3 100 10 m² 804 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE CAST AGAINST EXCAVATED SURFACES
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Strip footings.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a steel trowel:
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds, slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls.
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 11 m 618 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 12 m² 52 0.00 0.00 0.00
3 100 13 m 1053 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 14 m² 56 0.00 0.00 0.00
3 101 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Soffits:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough formwork to form:
3 101 15 No. 40 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 16 m² 56 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Opening exceeding 1m and not exceeding 2m girth through not exceeding 300mm slab.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 1 m² 255 0.00 0.00 0.00
3 MASONRY 103 2 m² 673 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 3 m² 638 0.00 0.00 0.00
3 MASONRY 103 4 m² 104 0.00 0.00 0.00
3 MASONRY 103 5 m² 1587 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 0.00 0.00 0.00
3 MASONRY 103 6 m 230 0.00 0.00 0.00
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 7 m² 1381 0.00 0.00 0.00
3 MASONRY 104 8 m² 32 0.00 0.00 0.00
BRICKWORK IN FOUNDATIONS (PROVISIONAL)
Brickwork of concrete bricks [14Mpa] in Class I mortar:Half brick walls.One brick walls.BRICKWORK IN SUPERSTRUCTURE
Brickwork of concrete bricks [7Mpa] in Class I mortar:Half brick walls.Half brick walls in beamfilling.One brick walls.BRICKWORK SUNDRIESBrickwork sundries:Brick-on-edge cill set sloping and projecting.Fair face to brickwork in horizontal stretcher bond pointed with recessed horizontal and flush vertical joints:Extra for fair face.Half brick walls pointed on both sides.
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 9 m² 1413 0.00 0.00 0.00
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 10 m² 9 0.00 0.00 0.00
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 11 m 3115 0.00 0.00 0.00
3 MASONRY 104 12 m 2591 0.00 0.00 0.00
3 MASONRY 104 13 m 8275 0.00 0.00 0.00
3 MASONRY 104 14 m 7292 0.00 0.00 0.00
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 15 m 620 0.00 0.00 0.00
Cement wash of 1:3 liquid cement and sand mixture applied with a brush:On brick surfaces.Joint forming material in movement joints:10mm Bitumen impregnated fibre board built in vertically through brick walls.Brickwork reinforcement:75mm Wide reinforcement built in horizontally in foundations.75mm Wide reinforcement built in horizontally in superstructure.
150mm Wide reinforcement built in horizontally in foundations.
150mm Wide reinforcement built in horizontally in superstructure.Approved prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.
3 MASONRY 104 0.00 0.00 0.00
3 MASONRY 104 16 No. 24 0.00 0.00 0.00
3 MASONRY 105 0.00 0.00 0.00
3 MASONRY 105 17 No. 32 0.00 0.00 0.00
3 MASONRY 105 0.00 0.00 0.00
3 MASONRY 105 18 No. 84 0.00 0.00 0.00
3 MASONRY 105 0.00 0.00 0.00
3 MASONRY 105 0.00 0.00 0.00
3 MASONRY 105 19 m 168 0.00 0.00 0.00
3 MASONRY 105 0.00 0.00 0.00
Galvanised wire ties etc:4mm Diameter roof tie 2m girth bent double with one end tied around steel purlin and other end built into brickwork.Galvanised hoop iron cramps, ties, etc:30 x 1,6mm Roof tie 2,0m long tied around steel purlin and shot pinned to both sides of brickwork.Air bricks etc:230 x 160mm Galvanised air brick.NUTEC-CEMENT WINDOW SILLSNatural grey sills in single lengths bedded in class I mortar including metal fixing lugs etc:
15 x 150mm Wide sills set flat and slightly projecting.BRICK PAVING
3 MASONRY 105 0.00 0.00 0.00
3 MASONRY 105 20 m² 10 0.00 0.00 0.00
3 MASONRY 105 21 m 2 0.00 0.00 0.00
3 107 0.00 0.00 0.00
Paving of 50mm thick cement paving bricks with open joints on and including 50mm thick river sand bed with sand and cement mixture swept into joints, hosed down and pointed with slightly keyed joints including termite and soil posioning, preparation of grPaving in fish bone patern.
110mm Wide brick-on-end edging on 100mm thick concrete bed.
WATERPROOFING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 1 In walls. m² 93 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 2 m² 1693 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
WATERPROOFING
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
WATERPROOFING
DAMPPROOFING OF WALLS AND FLOORS
WATERPROOFING
One layer of 375 micron Consol Plastics Brikgrip DPC embossed damp proof course:
WATERPROOFING
WATERPROOFING
One layer of 250 micron Consol Plastics Gunplas Black waterproof sheeting sealed at laps with Gunplas Pressure Sensitive Tape:
WATERPROOFING
Under surface beds.
WATERPROOFING
WATERPROOFING TO ROOFS, BASEMENTS, ETC.
WATERPROOFING
Bondglass flexible reinforced waterproofing:
3 107 3 m 11 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 4 m 48 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 5 m 42 0.00 0.00 0.00
WATERPROOFING
Flashing strip 150mm girth at turn-ups including sealing top edge into groove with mastic.
WATERPROOFING
JOINT SEALANTS ETC
WATERPROOFING
'Expandite' or other approved two-part grey polysulphide sealing compound including backing cord, bond breaker, primer, etc:
WATERPROOFING
10 x 15mm In vertical expansion joints.
WATERPROOFING
'Sikaflex PRO-3 WF multi-use. One component, polyurethane sealant in colour Concrete Grey applied in accordance with the manufacturer's instructions.
WATERPROOFING
10 x 15mm elastic joint sealer on floor tiling.
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
ROOF COVERINGS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ROOF COVERINGS
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
ROOF COVERINGS
TROUGHED METAL SHEETING AND ACCESSORIES
ROOF COVERINGS
0.5mm thick industrial Z275 IBR profiled or similar approved sheet steel in single lengths fixed to steel purlins or rails and sheet steel accessories:
3 110 1 m² 2468 0.00 0.00 0.00
3 110 Flashings: 0.00 0.00 0.00
3 110 2 m 220 0.00 0.00 0.00
3 110 3 m 424 0.00 0.00 0.00
3 110 4 m 758 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 5 m² 1887 0.00 0.00 0.00
ROOF COVERINGS
Roof covering with pitch not exceeding 25 degrees, in transportable lengths not exceeding 20m.
ROOF COVERINGS
ROOF COVERINGS
Ridge capping 550mm girth, three times bent along girth and notched on site to suit roof profile.
ROOF COVERINGS
Serrated eaves closers.
ROOF COVERINGS
Narrow and broad flute closers.
ROOF COVERINGS
ROOF AND WALL INSULATION
ROOF COVERINGS
Sisalation 400 housing grade glass fibre reinforced aluminium foil bonded insulation:
ROOF COVERINGS
Insulation laid taut over purlins on galvanised straining wires (at approximately 300mm centres).
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 1 No. 19 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 2 m 374 0.00 0.00 0.00
3 111 3 m 546 0.00 0.00 0.00
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
CARPENTRY AND JOINERY
FLUSH DOORS
CARPENTRY AND JOINERY
Solid core flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought 'Supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 4 No. 34 0.00 0.00 0.00
3 111 5 No. 42 0.00 0.00 0.00
3 112 Softboard: 0.00 0.00 0.00
3 112 6 m² 136 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 7 m 24 0.00 0.00 0.00
3 112 8 m 24 0.00 0.00 0.00
CARPENTRY AND JOINERY
NOTICE BOARDS, PINNING BOARDS, KEYBOARDS, DUCKBOARDS, ETC
CARPENTRY AND JOINERY
Vitrex or similar approved:
CARPENTRY AND JOINERY
Pinboards model 2300 code: '2315', size 1,000 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F3).
CARPENTRY AND JOINERY
Pinboard model 2300 code: '2309', size 2,400 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F1).
CARPENTRY AND JOINERYCARPENTRY AND JOINERY
13mm Pinning boards.
CARPENTRY AND JOINERY
THE FOLLOWING IN RECEPTION COUNTER
CARPENTRY AND JOINERY
Sawn softwood:
CARPENTRY AND JOINERY
28 x 32mm Filler piece.
CARPENTRY AND JOINERY
28 x 114mm Filler piece.
3 112 0.00 0.00 0.00
3 112 9 m² 16 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 10 m 56 0.00 0.00 0.00
3 112 11 m 13 0.00 0.00 0.00
3 112 12 m 56 0.00 0.00 0.00
3 112 13 m 80 0.00 0.00 0.00
3 112 14 m 27 0.00 0.00 0.00
3 112 Melawood: 0.00 0.00 0.00
3 112 15 No. 40 0.00 0.00 0.00
3 113 16 No. 16 0.00 0.00 0.00
3 113 0.00 0.00 0.00
CARPENTRY AND JOINERY
Wrought 'Supa Wood':
CARPENTRY AND JOINERY
32mm Tops, etc.
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
44 x 60mm Rebated edge with rounded edges.
CARPENTRY AND JOINERY
44 x 70mm Twice rounded foot rest
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
22 x 70mm Framed framing bearer.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
Issue tray 104 x 493 x 166mm deep of 12 x 166mm sides, front and back and 4mm tempered hardboard bottom and four 3mm hardboard spacers 110mm x 166mm equally spaced let into sides .
CARPENTRY AND JOINERY
Drawer 535 x 493 x 166mm deep of 18 x 166mm grooved front, 12 x 166mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Formica decorative laminate:
3 113 17 m² 16 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 18 No. 56 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 19 m 53 0.00 0.00 0.00
3 113 20 m 53 0.00 0.00 0.00
3 113 21 m 21 0.00 0.00 0.00
3 113 22 m 109 0.00 0.00 0.00
3 113 Melawood: 0.00 0.00 0.00
3 113 23 m² 67 0.00 0.00 0.00
CARPENTRY AND JOINERY
1.2mm Thick to tops, etc.
CARPENTRY AND JOINERY
PELMITS, ETC.
CARPENTRY AND JOINERY
Wrought 'Supa wood':
CARPENTRY AND JOINERY
Pelmit formed with 18mm Thick 'Supa wood' 138mm wide x 140mm high and 2000mm long (external dimensions) including single curtain track with 10 rollers per metre, brackets, closed ends, etc. plugged.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM CUPBOARDS
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18 x 30mm Bearers nailed.
CARPENTRY AND JOINERY
18 x 70mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
3 113 24 No. 8 0.00 0.00 0.00
3 114 25 No. 16 0.00 0.00 0.00
3 114 26 m 53 0.00 0.00 0.00
3 114 27 m 53 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 28 m² 51 0.00 0.00 0.00
3 114 29 m 19 0.00 0.00 0.00
3 114 30 m 176 0.00 0.00 0.00
3 114 Melawood: 0.00 0.00 0.00
CARPENTRY AND JOINERY
Drawer 453 x 500 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Drawer 453 x 750 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
1.2mm Thick edge strips 18mm wide.
CARPENTRY AND JOINERY
18 x 70mm Framed framing.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM WOODEN SHELVING
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18mm Thick to shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
18 x 75mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
3 114 31 m² 80 0.00 0.00 0.00
3 116 0.00 0.00 0.00
3 116 0.00 0.00 0.00
3 116 0.00 0.00 0.00
3 116 0.00 0.00 0.00
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
CEILINGS PARTITIONS AND ACCESS FLOORING
NAILED UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm Thick light industrial Z275 IBR profiled sheet steel in single lengths fixed to steel purlins or rails:
3 116 1 m² 1484 0.00 0.00 0.00
3 116 2 No. 14 0.00 0.00 0.00
3 116 0.00 0.00 0.00
3 116 3 m 362 0.00 0.00 0.00
3 116 4 m 546 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
including 75 x 50 x 20 x 2.5mm lipped channel brandering at 1250mm centres, bolted to and including 50 x 50 x 5mm L-shaped cleat 50mm long.
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 2.5mm angle section framing covered with 'Alu zinc' IBR profiled sheeting and fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
and broad flute closers 150mm girth to suit IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 1 No. 112 0.00 0.00 0.00
3 117 2 No. 16 0.00 0.00 0.00
3 117 LOCKS 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 3 No. 8 0.00 0.00 0.00
3 117 4 No. 16 0.00 0.00 0.00
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
IRONMONGERY
HINGES, BOLTS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Metal concealed hinges.
IRONMONGERY
50mm Chromium plated brass barrel bolt.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
50mm Padlock.
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset complete with pair of handles.
3 117 5 No. 3 0.00 0.00 0.00
3 117 6 No. 40 0.00 0.00 0.00
3 117 7 No. 40 0.00 0.00 0.00
3 118 HANDLES 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 8 No. 112 0.00 0.00 0.00
3 118 9 No. 40 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 10 No. 90 0.00 0.00 0.00
3 118 11 No. 12 0.00 0.00 0.00
3 118 12 No. 4 0.00 0.00 0.00
3 118 13 No. 1 0.00 0.00 0.00
3 118 Solid: 0.00 0.00 0.00
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset with striking plate fixed to metal complete with a pair of handles.
IRONMONGERY
Art 52/146 cylinder cupboard lockset and escutcheon.
IRONMONGERY
Art 67/146 cylinder drawer lockset and escutcheon.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Art 123 pull handle.
IRONMONGERY
Art 102 knob.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
Anodised aluminium plate with male or female symbol.
IRONMONGERY
150 x 150mm Anodised aluminium plate with male or female symbol.
IRONMONGERY
150 x 150mm Natural anodised aluminium plate with paraplegic symbol.
IRONMONGERY
3 118 14 No. 15 0.00 0.00 0.00
3 118 15 No. 4 0.00 0.00 0.00
3 118 16 No. 1 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 Approved: 0.00 0.00 0.00
3 118 17 No. 9 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 18 No. 2 0.00 0.00 0.00
3 119 19 No. 2 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 20 No. 2 0.00 0.00 0.00
3 119 21 No. 2 0.00 0.00 0.00
3 119 0.00 0.00 0.00
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
150 x 150mm Anodised aluminium plate with male or female symbol.
IRONMONGERY
150 x 150mm Natural anodised aluminium plate with paraplegic symbol.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
IRONMONGERY
Chromium plated toilet roll holder plugged.
IRONMONGERY
Chairman Industries or similar approved:
IRONMONGERY
DL2 Stainless steel side grab rail.
IRONMONGERY
SR2 Stainless steel backgrab rail.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm Diameter chromium plated towel rail 600mm long including end brackets plugged.
IRONMONGERY
20mm Diameter chromium plated towel rail 1200mm long including end brackets plugged.
IRONMONGERY
Chairman Industries:
3 119 22 No. 2 0.00 0.00 0.00
3 119 SUNDRIES 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 23 No. 57 0.00 0.00 0.00
3 119 24 No. 4 0.00 0.00 0.00
3 119 25 No. 8 0.00 0.00 0.00
3 119 Approved: 0.00 0.00 0.00
3 119 26 No. 64 0.00 0.00 0.00
3 119 27 No. 128 0.00 0.00 0.00
3 120 28 No. 704 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
IRONMONGERY
32mm Type SR2 side grab rail plugged.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
38mm Diameter rubber door stop floor mounted.
IRONMONGERY
38mm Diameter rubber door stop.
IRONMONGERY
38mm Diameter rubber door stop plugged to wall.
IRONMONGERY
IRONMONGERY
Raised type adjustable shelving strips 590mm long.
IRONMONGERY
Raised type adjustable shelving strips 1875mm long.
IRONMONGERY
Shelving studs.
IRONMONGERY
SHELVING UNITS
IRONMONGERY
Approved industrial steel shelving units with standard epoxy powder coated finish including uprights, open base foot pieces, shelf brackets, shelves, spacers, top rails, top finishing plates and adjustable book clips:
3 120 29 No. 11 0.00 0.00 0.00
3 120 30 No. 3 0.00 0.00 0.00
3 120 31 No. 9 0.00 0.00 0.00
3 120 32 No. 8 0.00 0.00 0.00
3 120 34 No. 3 0.00 0.00 0.00
3 120 33 No. 2 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 1800 x 312 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 1800 x 450 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 450mm shelves.
IRONMONGERY
Single shelving unit 3600 x 312 x 1905mm high in 4 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 3600 x 312 x 1295mm high in 4 bays with uprights, each bay 900mm wide with 4 x 312mm shelves.
IRONMONGERY
Single shelving unit 4500 x 312 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
32mm Type DL2 back grab rail plugged.
3 120 35 No. 3 0.00 0.00 0.00
3 120 36 No. 8 0.00 0.00 0.00
3 120 37 No. 8 0.00 0.00 0.00
3 121 38 No. 1 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 4500 x 450 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 3450mm shelves.
IRONMONGERY
Single shelving unit 5400 x 312 x 990mm high in 6 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
IRONMONGERY
Single shelving unit 7200 x 312 x 990mm high in 8 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
IRONMONGERY
Single shelving unit 7200 x 312 x 1905mm high in 8 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
STEEL LOCKERS
IRONMONGERY
Approved steel lockers with standard baked enamel finish:
3 121 39 No. 2 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 40 No. 21 0.00 0.00 0.00
3 123 0.00 0.00 0.00
IRONMONGERY
Teachers cupboard 900 x 450 x 1800mm high with four adjustable shelves.
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or similar approved:
IRONMONGERY
Vitreous enameled chalkboard magnetic steel surface, non reflective to comply with SABS specification CKS-36-1980 supplied complete with aluminum chalk rail and mounted to wall with standard fixing brackets.
STRUCTURAL STEELWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 1 Kg 8354 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 2 Kg 17 0.00 0.00 0.00
3 123 3 No. 552 0.00 0.00 0.00
3 123 4 No. 138 0.00 0.00 0.00
3 123 0.00 0.00 0.00
STRUCTURAL STEELWORK
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
STRUCTURAL STEELWORK
STEEL TRUSSES ETC
STRUCTURAL STEELWORK
Welded roof trusses of angle section rails, struts, braces, cleats, etc and flat section bearer, gusset and connection plates bolted to steel:
STRUCTURAL STEELWORK
Sixty six double pitched trusses 10440 x 1024mm high extreme.
STRUCTURAL STEELWORK
Bolts to trusses etc:
STRUCTURAL STEELWORK
High tensile bolts.
STRUCTURAL STEELWORK
M8 x 100mm Expansion bolt.
STRUCTURAL STEELWORK
12mm Diameter U-shaped anchor bolt 800mm girth.
STRUCTURAL STEELWORK
PURLINS, GIRTS, BRACING, ETC
3 123 0.00 0.00 0.00
3 123 5 Kg 8227 0.00 0.00 0.00
3 123 6 Kg 5546 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 1 Kg 84 0.00 0.00 0.00
STRUCTURAL STEELWORK
Purlins and girts bolted to steel:
STRUCTURAL STEELWORK
Lipped channel section purlins.
STRUCTURAL STEELWORK
Lipped channel section brandering.
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
METALWORK
SUNDRY STEELWORK
METALWORK
Welded bearers and framing to ceiling trapdoor:
METALWORK
30 x 30 x 2.5mm Angle section framing.
3 124 2 No. 112 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 3 Kg 312 0.00 0.00 0.00
3 124 4 No. 64 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 5 No. 8 0.00 0.00 0.00
METALWORK
Extra over 30 x 30 x 2.5mm angle section for welded T-intersection.
METALWORK
Ceiling bearers:
METALWORK
50 x 50 x 5mm Angle section bearers.
METALWORK
Cut and pin end of 50 x 50 x 5mm angle section bearer 100mm deep into brickwork.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
Screens and gates:
METALWORK
Single gate 600 x 1165mm high formed of 40 x 40 x 5mm angle section frame, filled in with Ref. 4 expanded metal panel and two 40 x 40 x 5mm angle section posts 1165 long rawl bolted to brick work with and including 10mm diameter bolts at 500mm centres and
3 125 6 No. 16 0.00 0.00 0.00
3 125 7 No. 4 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 8 No. 19 0.00 0.00 0.00
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
Single burglar gate 813 x 2337mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 1167mm long 12 x 12
METALWORK
PRESSED STEEL DOOR FRAMES
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 813 x 2032mm high.
3 125 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 9 No. 20 0.00 0.00 0.00
3 125 10 No. 67 0.00 0.00 0.00
3 125 11 No. 64 0.00 0.00 0.00
3 125 12 No. 12 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 13 No. 21 0.00 0.00 0.00
METALWORK
STEEL WINDOWS, DOORS, ETC.
METALWORK
Standard residential windows with NBP2 burglar bars to all sections:
METALWORK
Window type NG2, 1022 x 359mm high (W3).
METALWORK
Window type E4H, 1511 x 654mm high (W2).
METALWORK
Window type C4H, 1511 x 949mm high (W4 & W7).
METALWORK
Window type D4H, 1511 x 1245mm high (W1).
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard 'Wispeco' chawl door with back panel:
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock complete with a pair of handles.
3 126 14 No. 9 0.00 0.00 0.00
3 126 15 No. 14 0.00 0.00 0.00
3 126 16 No. 6 0.00 0.00 0.00
3 126 17 No. 4 0.00 0.00 0.00
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Blesbok 460/313 four lever mortice lock complete with a pair of handles.
METALWORK
Modified door 713 x 2032mm high with double rebated frame suitable for 813 x 2032mm high door and for half wall and with 'Solid' Besbok 464/364 WC lockset.
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock.
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock.
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 SCREEDS 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 1 m² 1608 0.00 0.00 0.00
3 128 0.00 0.00 0.00
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
PLASTERING
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake or similar approved floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.
PLASTERING
GRANOLITHIC
3 128 0.00 0.00 0.00
3 128 2 m² 123 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 3 On walls. m² 2682 0.00 0.00 0.00
3 128 4 m² 76 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 5 m² 51 0.00 0.00 0.00
3 129 6 m 1509 0.00 0.00 0.00
3 129 7 m 230 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 8 m 29 0.00 0.00 0.00
PLASTERING
Untinted granolithic on concrete:
PLASTERING
25mm Thick on floors and landings.
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
PLASTERING
On 200mm wide band.
PLASTERING
On sloping top, edge and projecting soffits of sills 505mm girth.
PLASTERING
CORNER PROTECTORS, DIVIDING STRIPS, ETC
PLASTERING
Corner protectors, dividing strips, etc:
PLASTERING
3 x 35mm Flat section steel weather bar.
3 TILING 131 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 1 m 340 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet BlocksNOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.WALL TILING
3 TILING 131 0.00 0.00 0.00
3 TILING 131 2 m² 27 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 3 m² 2 0.00 0.00 0.00
3 TILING 132 0.00 0.00 0.00
Allow a PC sum of N$ 200.00 per m2 for purchasing and delivery of 200 x 200 ceramic wall tiles fixed with adhesive to and including 20mm plaster bedding on walls and flush pointed with tinted waterproof jointing compound:On walls in isolated panels, splashbacks, etc.
300 x 300mm 'Dimo Top' unglazed ceramic tiles fixed with adhesive to plaster (plaster elsewhere) and flush pointed with tinted jointing compound:On walls as splash backs.CERAMIC FLOOR TILING
3 TILING 132 0.00 0.00 0.00
3 TILING 132 4 m² 56 0.00 0.00 0.00
3 TILING 132 5 m² 13 0.00 0.00 0.00
3 TILING 132 6 No. 40 0.00 0.00 0.00
3 TILING 132 7 m 200 0.00 0.00 0.00
3 TILING 132 0.00 0.00 0.00
3 TILING 132 8 m² 5 0.00 0.00 0.00
3 TILING 132 9 m² 5 0.00 0.00 0.00
Allow a PC sum of N$ 260.00 per m2 for purchasing and delivery of 300 x 300mm full body ceramic floor tiles fixed with adhesive to and including 25mm screed bedding on concrete and flush pointed with tinted waterproof jointing compound:
On vanity slabs, cupboard slabs, cover slabs, etc.On narrow widths.cutting tiles around 435 x 335mm laboratory sink.100mm high cut tile skirting.
300 x 300mm 'Dimo Top' unglazed floor tiles on 25mm bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors and landings.
On vanity slabs, cupboard slabs, cover slabs, etc.
3 TILING 132 10 No. 9 0.00 0.00 0.00
3 TILING 132 11 m 20 0.00 0.00 0.00 3 TILING 132 SUNDRIES 0.00 0.00 0.00 3 TILING 132 Sundries: 0.00 0.00 0.00
3 TILING 132 12 m 126 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 1 No. 4 0.00 0.00 0.00
Cutting and fitting around WC.100mm high cut tile skirting.
'Schluter Rondec' aluminium tile edging.
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
Springbok code 0112 wash hand basin with code 811820 cast iron brackets.
3 134 2 No. 9 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 3 No. 12 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 4 No. 4 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 5 No. 40 0.00 0.00 0.00
3 135 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Low level WC suite comprising of Protea pan with double flap heavy duty plastic seat and cover and 9l cistern with flush pipe.
PLUMBING AND DRAINAGE
Approved stainless steel:
PLUMBING AND DRAINAGE
506 x 450mm Wash hand basins.
PLUMBING AND DRAINAGE
'Citimetal' stainless steel:
PLUMBING AND DRAINAGE
Type TU 101 urinal 1460mm wide with 11 litre 'Shires Lynx' automatic flushing cistern, flush and sparge pipes and hinged domical grating.
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
435 x 335mm Springbok 2345 laboratory sink.
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
3 135 6 No. 14 0.00 0.00 0.00
3 135 7 No. 4 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 8 No. 12 0.00 0.00 0.00
3 135 TRAPS ETC 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 9 No. 4 0.00 0.00 0.00
3 135 uPVC: 0.00 0.00 0.00
3 135 10 No. 12 0.00 0.00 0.00
3 135 Brass: 0.00 0.00 0.00
PLUMBING AND DRAINAGE
High level water-saving WC suit comprising of Polyethylene toilet bowl with heavy duty double flap seat and cover, 'Shires' remote flushing control and 9l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover 9l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
Waste unions etc:
PLUMBING AND DRAINAGE
40mm 'Cobra' 310 sink waste outlet.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved:
PLUMBING AND DRAINAGE
32mm 340 CP bottle trap.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
40mm Deep seal 'P' or 'S' trap.
PLUMBING AND DRAINAGE
3 135 11 No. 4 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 12 No. 40 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 13 No. 4 0.00 0.00 0.00
3 136 14 No. 15 0.00 0.00 0.00
3 136 15 No. 6 0.00 0.00 0.00
3 136 16 No. 40 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 17 No. 15 0.00 0.00 0.00
3 136 18 No. 6 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 19 m 10 0.00 0.00 0.00
3 136 20 m 8 0.00 0.00 0.00
3 136 21 m 14 0.00 0.00 0.00
PLUMBING AND DRAINAGE
50mm Reseal 'P' trap.
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
Code 8790Z0 Acid resistant waste fitting comprising of waste, overflow pipe, etc.
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech or similar approved':
PLUMBING AND DRAINAGE
15mm Star 166/041 sink mixer.
PLUMBING AND DRAINAGE
15mm Star 232/350CP angle regulating valve.
PLUMBING AND DRAINAGE
15mm Star 214CP bibtap.
PLUMBING AND DRAINAGE
15mm 115/046 Star laboratory tap.
PLUMBING AND DRAINAGE
'Cobra Watertech':
PLUMBING AND DRAINAGE
15mm Star 232/350CP angle regulating valve.
PLUMBING AND DRAINAGE
15mm Star 214CP bibtap.
PLUMBING AND DRAINAGE
SANITARY PLUMBING
PLUMBING AND DRAINAGE
uPVC pipes:
PLUMBING AND DRAINAGE
40mm Pipes.
PLUMBING AND DRAINAGE
50mm Pipes.
PLUMBING AND DRAINAGE
110mm Pipes.
3 136 22 m 14 0.00 0.00 0.00
3 136 23 m 30 0.00 0.00 0.00
3 137 0.00 0.00 0.00
3 137 24 No. 2 0.00 0.00 0.00
3 137 25 No. 8 0.00 0.00 0.00
3 137 26 No. 6 0.00 0.00 0.00
3 137 27 No. 22 0.00 0.00 0.00
3 137 28 No. 10 0.00 0.00 0.00
3 137 29 No. 16 0.00 0.00 0.00
3 137 30 No. 4 0.00 0.00 0.00
3 137 31 No. 2 0.00 0.00 0.00
3 137 32 No. 16 0.00 0.00 0.00
3 137 33 No. 2 0.00 0.00 0.00
3 137 34 No. 2 0.00 0.00 0.00
PLUMBING AND DRAINAGE
40mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
110mm Pipes laid in and including trenches not exceeding 1m deep.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
110mm Reducer.
PLUMBING AND DRAINAGE
40mm Bend.
PLUMBING AND DRAINAGE
50mm Bend.
PLUMBING AND DRAINAGE
110mm Bend.
PLUMBING AND DRAINAGE
110mm Reducing junction.
PLUMBING AND DRAINAGE
110mm Pan connector.
PLUMBING AND DRAINAGE
110mm Bent pan connector.
PLUMBING AND DRAINAGE
50mm Access bend.
PLUMBING AND DRAINAGE
110mm Access bend.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm inlets, necessary pipe and all fittings.
3 137 35 No. 2 0.00 0.00 0.00
3 138 36 No. 2 0.00 0.00 0.00
3 138 37 No. 10 0.00 0.00 0.00
3 138 Gulleys: 0.00 0.00 0.00
3 138 38 No. 8 0.00 0.00 0.00
3 138 39 Item 2 0.00 0.00 0.00
3 138 40 No. 10 0.00 0.00 0.00
3 138 41 No. 10 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 42 m 88 0.00 0.00 0.00
3 138 43 m 20 0.00 0.00 0.00
3 138 44 m 12 0.00 0.00 0.00
3 138 45 m 9 0.00 0.00 0.00
3 138 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Stubstack consisting of three x 110mm, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, one x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
50mm 'GI Two-way' vent valve.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
110mm Overflow gulley not exceeding 1m deep.
PLUMBING AND DRAINAGE
Testing waste pipe system.
PLUMBING AND DRAINAGE
110mm Access junction.
PLUMBING AND DRAINAGE
110mm Access junction.
PLUMBING AND DRAINAGE
SOIL DRAINAGE
PLUMBING AND DRAINAGE
uPVC pipes:
PLUMBING AND DRAINAGE
50mm Pipes.
PLUMBING AND DRAINAGE
40mm Pipes.
PLUMBING AND DRAINAGE
50mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
110mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
3 138 46 No. 3 0.00 0.00 0.00
3 139 47 No. 4 0.00 0.00 0.00
3 139 48 No. 9 0.00 0.00 0.00
3 139 49 No. 9 0.00 0.00 0.00
3 139 50 No. 16 0.00 0.00 0.00
3 139 51 No. 56 0.00 0.00 0.00
3 139 52 No. 32 0.00 0.00 0.00
3 139 53 No. 3 0.00 0.00 0.00
3 139 54 No. 4 0.00 0.00 0.00
3 139 55 No. 6 0.00 0.00 0.00
3 139 Sundries: 0.00 0.00 0.00
3 139 56 No. 1 0.00 0.00 0.00
3 139 57 Item 8 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Reducer.
PLUMBING AND DRAINAGE
110mm Bend.
PLUMBING AND DRAINAGE
110mm Pan connector.
PLUMBING AND DRAINAGE
110mm Bend pan connector.
PLUMBING AND DRAINAGE
50mm Access bend.
PLUMBING AND DRAINAGE
50mm Bend.
PLUMBING AND DRAINAGE
50mm Junction.
PLUMBING AND DRAINAGE
50mm 'GI Two-way' vent valve.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, one x 40mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of one x 110mm, two x 40mm, two x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, two x 40mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
Testing waste pipe system.
3 139 58 No. 1 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 59 m 79 0.00 0.00 0.00
3 140 60 m 108 0.00 0.00 0.00
3 140 61 m 16 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 62 No. 80 0.00 0.00 0.00
3 140 63 No. 56 0.00 0.00 0.00
3 140 64 No. 8 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 65 No. 76 0.00 0.00 0.00
3 140 66 No. 20 0.00 0.00 0.00
3 140 67 No. 20 0.00 0.00 0.00
3 140 68 No. 2 0.00 0.00 0.00
3 141 TESTING 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, two x 40mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
15mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
28mm Pipes.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
Connection of 22mm pipe to 25mm HDPE pipe.
PLUMBING AND DRAINAGE
Extra over class 10 copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
28mm Fittings.
PLUMBING AND DRAINAGE
Connection of 28mm pipe to 35mm HDPE pipe.
PLUMBING AND DRAINAGE
3 141 Testing: 0.00 0.00 0.00
3 141 69 Item 8 0.00 0.00 0.00
3 141 70 m 4 0.00 0.00 0.00
3 141 71 No. 2 0.00 0.00 0.00
3 141 72 No. 1 0.00 0.00 0.00
3 141 0.00 0.00 0.00
3 141 73 No. 1 0.00 0.00 0.00
3 141 'Chubb': 0.00 0.00 0.00
3 141 74 No. 21 0.00 0.00 0.00
3 143 0.00 0.00 0.00
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
50mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
50mm Junction.
PLUMBING AND DRAINAGE
40mm Access bend.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
40mm Access bend.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
9kg Dry chemical fire extinguisher with backing board.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 143 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 1 No. 14 0.00 0.00 0.00
3 143 2 No. 2 0.00 0.00 0.00
3 143 3 No. 12 0.00 0.00 0.00
3 143 4 No. 9 0.00 0.00 0.00
3 143 5 No. 10 0.00 0.00 0.00
3 143 6 No. 5 0.00 0.00 0.00
3 143 7 No. 2 0.00 0.00 0.00
3 144 8 No. 4 0.00 0.00 0.00
ELECTRICAL WORK
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Lockable distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock.
ELECTRICAL WORK
Distribution board build into wall.
ELECTRICAL WORK
40A Single pole circuit breaker.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
16A Single pole circuit breaker.
ELECTRICAL WORK
16A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
40A Single pole earth leakage.
3 144 9 No. 1 0.00 0.00 0.00
3 144 CABLES 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 10 m 188 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 11 No. 14 0.00 0.00 0.00
3 144 EARTHING 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 12 m 24 0.00 0.00 0.00
3 144 13 m 15 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 14 No. 8 0.00 0.00 0.00
3 144 15 No. 1 0.00 0.00 0.00
3 145 SLEEVES 0.00 0.00 0.00
ELECTRICAL WORK
20A Single pole circuit breaker.
ELECTRICAL WORK
ELECTRICAL WORK
V PVC/SWA/PVC copper cable pulled in cable sleeves (sleeves measured elsewhere).
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere).
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
3 145 0.00 0.00 0.00
3 145 16 m 25 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 17 m 31 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 18 No. 14 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 19 m 716 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 20 m 287 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 21 m 190 0.00 0.00 0.00
3 145 22 m 30 0.00 0.00 0.00
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on UPVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Cast in concrete, surface bed or screed.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
25mm Diameter.
3 146 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 23 No. 158 0.00 0.00 0.00
3 146 24 No. 35 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 25 No. 19 0.00 0.00 0.00
3 146 26 No. 41 0.00 0.00 0.00
3 146 27 No. 3 0.00 0.00 0.00
3 146 28 No. 19 0.00 0.00 0.00
3 146 29 No. 6 0.00 0.00 0.00
3 146 30 No. 9 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 31 2.5mm². m 784 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 32 1.5mm². m 208 0.00 0.00 0.00
3 147 33 2.5mm². m 1245 0.00 0.00 0.00
3 147 34 4mm². m 483 0.00 0.00 0.00
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enameled fixed onto conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Metal type fixed onto PVC conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Cover plate for 100mm x 50mm box.
ELECTRICAL WORK
Cover plate for 100mm x 100mm box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORKELECTRICAL WORK
3 147 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 35 No. 4 0.00 0.00 0.00
3 147 36 No. 4 0.00 0.00 0.00
3 147 37 No. 72 0.00 0.00 0.00
3 147 38 No. 39 0.00 0.00 0.00
3 147 39 No. 43 0.00 0.00 0.00
3 147 40 No. 1 0.00 0.00 0.00
3 147 41 No. 8 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 0.00 0.00 0.00
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
16A Water proof light switch.
ELECTRICAL WORK
16A Two-lever one-way switch.
ELECTRICAL WORK
5A Three-pin unswitched socket outlet.
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
10A Day light switch.
ELECTRICAL WORK
100VA Transformer with overload and short circuit protection, with 4mm² cabling to Zehender RG07 terminal post in a star-configuration.
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with lamps, connections, etc., mounted in position
3 147 42 No. 17 0.00 0.00 0.00
3 147 43 No. 17 0.00 0.00 0.00
3 148 44 No. 118 0.00 0.00 0.00
3 148 0.00 0.00 0.00
3 148 0.00 0.00 0.00
3 148 45 No. 81 0.00 0.00 0.00
3 148 0.00 0.00 0.00
3 148 0.00 0.00 0.00
3 148 46 m 313 0.00 0.00 0.00
3 148 47 m 32 0.00 0.00 0.00
ELECTRICAL WORK
'Lascon B10' ceiling mounted light fitting and bulb. (Type A)
ELECTRICAL WORK
'Lascon B10' wall mounted light fitting and bulb. (Type B)
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light andfitting 1200mm long(Type C).
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level:
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Conductors, etc.:
ELECTRICAL WORK
6mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
ELECTRICAL WORK
70mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
3 148 48 No. 20 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 1 No. 8 0.00 0.00 0.00
3 150 2 No. 8 0.00 0.00 0.00
3 150 TAPS, ETC 0.00 0.00 0.00
3 150 0.00 0.00 0.00
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
MECHANICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
MECHANICAL WORK
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
MECHANICAL WORK
VALVES, ETC
MECHANICAL WORK
'Afrox' or other approved:
MECHANICAL WORK
15mm Brass ball valve.
MECHANICAL WORK
15mm Chrome gas angle valve.
MECHANICAL WORK
MECHANICAL WORK
'Brownall or other approved:
3 150 3 No. 40 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 4 m 53 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 5 No. 8 0.00 0.00 0.00
3 151 6 No. 8 0.00 0.00 0.00
3 151 7 15mm Tee. No. 40 0.00 0.00 0.00
3 151 8 No. 8 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
MECHANICAL WORK
Type CL 1265M two way gas cock.
MECHANICAL WORK
GAS SUPPLIES
MECHANICAL WORK
Class O copper pipes:
MECHANICAL WORK
15mm Pipes fixed to wall.
MECHANICAL WORK
Extra over class O copper pipes for fittings:
MECHANICAL WORK
15mm stop plug.
MECHANICAL WORK
15mm Wall plate elbow.
MECHANICAL WORK
MECHANICAL WORK
15mm BSP male connector.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet BlocksGLAZING TO STEEL WITH PUTTY
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 1 m² 137 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 2 m² 7 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 0.00 0.00 0.00
3 GLAZING 153 3 No. 12 0.00 0.00 0.00
4mm Clear float glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.4mm Obscure:
Panes exceeding 0,1m2 and not exceeding 0,5m2.TOPS, SHELVES, DOORS, MIRRORS, ETC.
6mm Silvered float glass copper backed mirrors with polished edges holed for and fixed with chromium plated dome capped mirror screws with rubber buffers to plugs in brickwork or concrete:Mirror 450 x 600 mm high with four screws.
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 1 m² 232 0.00 0.00 0.00
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
PAINTWORK
ON FLOATED PLASTER
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA(allow sufficient time for drying between coats):
PAINTWORK
On external floated plaster walls.
3 154 2 m 1374 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 3 m² 2272 0.00 0.00 0.00
3 154 4 m 862 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 5 m² 8 0.00 0.00 0.00
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Eggshell Enamel (allow sufficient time for drying between coats):
PAINTWORK
On internal floated plaster walls.
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
One coat primer and two coats exterior quality PVA emulsion paint:
PAINTWORK
On external floated plaster walls.
3 155 6 m 150 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 7 m 172 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 8 m² 136 0.00 0.00 0.00
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
One coat alkali resistant primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
ON SOFT BOARD
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat Plascon Wood Primer followed by one coat Plascon Universal Undercoat before aplying two coats Plascon Polyurethane Velvaglo. (allow sufficient time drying between coats):
PAINTWORK
On pinning boards..
3 155 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 9 m 85 0.00 0.00 0.00
3 155 ON METAL 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 10 m² 22 0.00 0.00 0.00
3 155 11 m² 120 0.00 0.00 0.00
3 155 12 m² 352 0.00 0.00 0.00
PAINTWORK
ON FIBRE-CEMENT
PAINTWORK
Clean the surface and apply one coat Plascon Alkali Resistant Plaster Primer and two coats Plascon Pure Acrylic PVA. (allow sufficient time for drying between coats):
PAINTWORK
On cills not exceeding 300 mm girth.
PAINTWORK
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and apply one coat Plascon Universal Undercoat and two coats Plascon Polyurethane Velvaglo (allow sufficient time for drying between coats):
PAINTWORK
On door frames.
PAINTWORK
On combination doors and frames.
PAINTWORK
On windows with burglar bars.
3 156 0.00 0.00 0.00
3 156 13 m² 80 0.00 0.00 0.00
3 156 14 m² 497 0.00 0.00 0.00
3 156 15 m 77 0.00 0.00 0.00
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and apply one coat Plascon Universal Undercoat and two coats Plascon Super Universal Enamel (allow sufficient time for drying between coats):
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On members of roof trusses.
PAINTWORK
On rails, bars, pipes, etc not exceeding 300 mm girth.
3 156 0.00 0.00 0.00
3 156 16 m² 1354 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 17 m² 444 0.00 0.00 0.00
3 156 0.00 0.00 0.00
PAINTWORK
Wash down with Plascon Galvanised Iron Cleaner, rinse with water and apply one coat Plascon Galvanised Iron Primer and two coats Plascon Waterbased Enamel White on galvanised steel ( allow sufficient time for drying between coats):
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
PAINTWORK
On internal floated plaster walls.
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and to coats enamel paint on steel:
3 156 18 m² 158 0.00 0.00 0.00
3 156 19 m² 16 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 20 m² 44 0.00 0.00 0.00
3 157 ON WOOD 0.00 0.00 0.00
3 157 0.00 0.00 0.00
3 157 21 On doors. m² 68 0.00 0.00 0.00
3 157 22 m² 61 0.00 0.00 0.00
3 157 23 m 374 0.00 0.00 0.00
PAINTWORK
On combination doors and frames.
PAINTWORK
On windows with burglar bars.
PAINTWORK
One coat calcium plumbate primer, one undercoat and two coats enamel paint on steel:
PAINTWORK
On members of roof trusses.
PAINTWORK
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat Plascon Wood Primer followed by one coat Plascon Universal Undercoat before aplying two coats Plascon Polyurethane Velvaglo. (allow sufficient time drying between coats):
PAINTWORK
PAINTWORK
On general surfaces of fittings.
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
3 157 0.00 0.00 0.00
3 157 24 m 452 0.00 0.00 0.00
3 157 0.00 0.00 0.00
3 157 25 m² 98 0.00 0.00 0.00
3 157 0.00 0.00 0.00
3 157 0.00 0.00 0.00
3 157 26 No. 36 0.00 0.00 0.00
PAINTWORK
Apply three coats of Plascon Polyurethene Varnish (allow sufficient time for drying between coats):
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats eggshell enamel paint on galvanised steel:
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
SIGNWRITING
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA(allow sufficient time for drying between coats):
PAINTWORK
Numeral or letter 500mm high.
3 157 0.00 0.00 0.00
3 157 27 No. 6 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 1 Holes. m3 0.9 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 2 m² 9 0.00 0.00 0.00
3 159 0.00 0.00 0.00
PAINTWORK
Suitable paint on plaster:
PAINTWORK
Numeral or letter 500mm high.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
The Following bills cater for:
A:1 x 2 Classroom BlockB:13 x Specialist Classroom BlocksC:2 x Waterborne Toilet Blocks
EXTERNAL WORKS
THE FOLLOWING IN FLAG POLE
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a steel trowel:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Rough Formwork to Sides:
3 159 3 m 21 0.00 0.00 0.00
3 159 Bolts: 0.00 0.00 0.00
3 159 4 No. 6 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 5 m 10 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 6 m3 1.11 0.00 0.00 0.00
3 160 7 m3 0.9 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 8 No. 1 0.00 0.00 0.00
3 160 9 m² 2 0.00 0.00 0.00
3 160 Flagpole: 0.00 0.00 0.00
3 160 10 m 15 0.00 0.00 0.00
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide.
EXTERNAL WORKS
EXTERNAL WORKS
M10 x 75mm Bolts.
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
25Mpa/19mm Concrete
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
Flagpole bases.
EXTERNAL WORKS
One coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on steel:
EXTERNAL WORKS
Extra over 50mm diameter pipe for closed end.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
EXTERNAL WORKS
50mm Diameter galvanised pipe.
3 160 11 No. 6 0.00 0.00 0.00
3 160 12 No. 3 0.00 0.00 0.00
3 160 13 No. 3 0.00 0.00 0.00
3 160 14 No. 2 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 15 m 5 0.00 0.00 0.00
3 161 16 m² 1 0.00 0.00 0.00
3 161 0.00 0.00 0.00
3 161 0.00 0.00 0.00
3 161 17 m³ 1 0.00 0.00 0.00
3 161 18 m³ 1 0.00 0.00 0.00
EXTERNAL WORKS
100 x 40 x 2.5mm Channel 2000mm long and cast into concrete 500mm deep.
EXTERNAL WORKS
6mm Diameter bend eye 35mm girth welded to 50mm diameter flagpole.
EXTERNAL WORKS
Fixing hook formed with two 6mm Diameter round bar bend to right angles 45mm and welded to upright.
EXTERNAL WORKS
Extra over 50mm diameter pipe for closed end.
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
SOIL DRAINAGE
EXTERNAL WORKS
25Mpa/19mm Unreinforced Concrete:
EXTERNAL WORKS
25Mpa Unreinforced concrete in bottom.
EXTERNAL WORKS
25Mpa Reinforced concrete in slab.
3 161 19 m² 3 0.00 0.00 0.00
3 161 20 m² 3 0.00 0.00 0.00
3 161 21 m² 2 0.00 0.00 0.00
3 161 22 m² 16 0.00 0.00 0.00
3 161 23 m² 20 0.00 0.00 0.00
3 161 24 No. 2 0.00 0.00 0.00
3 161 25 No. 2 0.00 0.00 0.00
3 161 uPVC: 0.00 0.00 0.00
3 161 26 Item 2 0.00 0.00 0.00
3 161 27 m 60 0.00 0.00 0.00
3 162 28 m 240 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 29 No. 2 0.00 0.00 0.00
3 162 30 No. 12 0.00 0.00 0.00
3 162 0.00 0.00 0.00
EXTERNAL WORKS
Rough Formwork to Soffits of slabs.
EXTERNAL WORKS
Type 395 fabric reinforcement in concrete surface beds, slabs, etc.
EXTERNAL WORKS
Half brick wall.
EXTERNAL WORKS
One brick wall.
EXTERNAL WORKS
Plaster on brick walls.
EXTERNAL WORKS
600 x 600mm x 63kg Cast iron double seal manhole cover and frame.
EXTERNAL WORKS
Lifting key for manhole cover.
EXTERNAL WORKS
EXTERNAL WORKS
Connection to existing water supply including all necessary fittings.
EXTERNAL WORKS
110mm Slotted uPVC agriculture pipes laid in trenches (elsewhere measured).
EXTERNAL WORKS
110mm Pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
Extra over uPVC pipes for fittings:
EXTERNAL WORKS
110mm End cap.
EXTERNAL WORKS
110mm Junction.
EXTERNAL WORKS
Inspection chambers (covers elsewhere):
3 162 31 No. 8 0.00 0.00 0.00
3 162 32 No. 2 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 33 No. 8 0.00 0.00 0.00
3 162 34 No. 2 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 35 m 80 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 36 No. 2 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 37 32mm Tee. No. 3 0.00 0.00 0.00
3 163 0.00 0.00 0.00
EXTERNAL WORKS
Inspection chamber 450 x 450mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Inspection chamber 450 x 600mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Gratings, covers, etc:
EXTERNAL WORKS
450 x 450mm x 45kg Cast iron single seal manhole cover and frame.
EXTERNAL WORKS
450 x 450mm x 45kg double seal manhole cover and frame.
EXTERNAL WORKS
WATER RETICULATION
EXTERNAL WORKS
Class 10 HDPE pipes:
EXTERNAL WORKS
35mm Pipes laid in and including trenches.
EXTERNAL WORKS
Extra over HDPE pipes for solvent welded pressure fittings:
EXTERNAL WORKS
35mm Reducer.
EXTERNAL WORKS
Extra over HDPE pressure pipes for solvent welded pressure fittings:
EXTERNAL WORKS
EXTERNAL WORKS
TAPS, VALVES, ETC
3 163 Brass: 0.00 0.00 0.00
3 163 38 No. 1 0.00 0.00 0.00
3 163 Sundries: 0.00 0.00 0.00
3 163 39 Item 8 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 CABLES 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 40 m 280 0.00 0.00 0.00
3 163 41 m 80 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 42 No. 9 0.00 0.00 0.00
3 163 43 No. 2 0.00 0.00 0.00
3 164 EARTHING 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 44 m 240 0.00 0.00 0.00
3 164 45 m 80 0.00 0.00 0.00
EXTERNAL WORKSEXTERNAL WORKS
35mm Stopcock.
EXTERNAL WORKS
EXTERNAL WORKS
Connect to existing water supply including water meter and all necessary fittings.
EXTERNAL WORKS
ELECTRICAL RETICULATION
EXTERNAL WORKS
EXTERNAL WORKS
600/1000 V PVC/PVC/SWA/PVC copper cable laid in and including trenches and backfilling.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
35mm2 4-Core.
EXTERNAL WORKS
CABLE TERMINATIONS
EXTERNAL WORKS
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
35mm2 4-Core.
EXTERNAL WORKS
EXTERNAL WORKS
Bare copper earth conductor installed with cable (cable measured elsewhere).
EXTERNAL WORKS
6mm2 Conductor.
EXTERNAL WORKS
10mm2 Conductor.
3 164 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 46 No. 10 0.00 0.00 0.00
3 164 47 No. 4 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
EXTERNAL WORKS
EARTH CONDUCTOR TERMINATION
EXTERNAL WORKS
Termination for bare and PVC insulated copper conductors including lugs and connections.
EXTERNAL WORKS
6mm2 Conductor.
EXTERNAL WORKS
10mm2 Conductor.
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
Making good damaged work, etc:
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 168 0.00 0.00 0.00
4 169 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 1 Steps. m³ 7 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 2 m³ 8 0.00 0.00 0.00
4 170 3 Columns. m³ 96 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 4 m³ 10 0.00 0.00 0.00
4 170 5 m² 10 0.00 0.00 0.00
4 170 6 m² 6 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
ALTERATIONS
Breaking up and removing reinforced concrete including cutting off and removing reinforcement:
ALTERATIONS
Stairs and landings.
ALTERATIONS
ALTERATIONS
Breaking down and removing brickwork etc:
ALTERATIONS
Mass brickwork.
ALTERATIONS
Half brick wall.
ALTERATIONS
One brick wall.
4 170 0.00 0.00 0.00
4 170 7 m 480 0.00 0.00 0.00
4 170 8 m 699 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 9 m 795 0.00 0.00 0.00
4 172 0.00 0.00 0.00
4 172 0.00 0.00 0.00
ALTERATIONS
Taking out/off and removing sundry metalwork:
ALTERATIONS
2,100mm High diamond wire mesh security fence and roll it aside (stays, posts, etc to be re-used).
ALTERATIONS
1,800mm High wire mesh security fence complete standard columns, posts, stays, bracers, etc.
ALTERATIONS
Repairs to existing diamond mesh razor fence:
ALTERATIONS
Painting to 2,100mm High diamond razor wire mesh security fence, with approved alumimium paint.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (1999 Edition) and to the Supplementary preambles which are incorporated in this Bill
EXTERNAL WORKS
SITE CLEARANCE, ETC.
4 172 0.00 0.00 0.00
4 172 1 m² 420 0.00 0.00 0.00
4 172 FENCING 0.00 0.00 0.00
4 172 0.00 0.00 0.00
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EXTERNAL WORKS
EXTERNAL WORKS
Security fencing, gates, etc including two coats bitumious aluminium paint on metal stays, framing, etc:
4 172 2 m 1179 0.00 0.00 0.00
4 172 3 m 1729 0.00 0.00 0.00
EXTERNAL WORKS
Security fencing 2,100mm high vertically formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanised razor wires ' bar
EXTERNAL WORKS
Mass concrete 20Mpa/19mm ground beam 150 x 350mm deep including necessary excavation, formwork, backfilling, etc,.
4 172 4 m 1250 0.00 0.00 0.00
4 172 5 No. 116 0.00 0.00 0.00
4 173 6 No. 53 0.00 0.00 0.00
EXTERNAL WORKS
Diamond mesh razor security fencing 2,100mm high vertically formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanise
EXTERNAL WORKS
Horizontal stay 76mm diameter 2000mm long with each end bolted to posts.
EXTERNAL WORKS
Inclined stay 50mm diameter 2500mm long with one end bolted to post and other end welded to 200 x 200 x 5mm sole plate and cast into and including (750 x 400 x 400 mm deep 15Mpa/19) concrete base.
4 173 7 No. 334 0.00 0.00 0.00
4 173 8 No. 39 0.00 0.00 0.00
4 173 9 No. 7 0.00 0.00 0.00
EXTERNAL WORKS
Straining post 100mm diameter 2,100mm high vertically, with 200 x 200 x 5mm sole plate and cast into and including (500 x 500 x 900mm 15Mpa/19) concrete base.
EXTERNAL WORKS
Corner post 100mm diameter 2,100 mm high vertically with 200 x 200x 5 mm sole plate and cast into and including (500 x 500 x 900 mm 15 Mpa/19) concrete base
EXTERNAL WORKS
Single gate 1,000 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
4 173 10 No. 4 0.00 0.00 0.00
4 174 11 No. 8 0.00 0.00 0.00
4 174 0.00 0.00 0.00
4 174 0.00 0.00 0.00
4 174 12 Trenches m³ 522 0.00 0.00 0.00
EXTERNAL WORKS
Single gate 1,500 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
EXTERNAL WORKS
Double gate 5,000 x 2,100mm high in equal leaves, each leave formed of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbe
EXTERNAL WORKS
THE FOLLOWING IN YARD WALL.
EXTERNAL WORKS
Excavation not exceeding 2m deep:
EXTERNAL WORKS
4 174 0.00 0.00 0.00
4 174 13 m² 1488 0.00 0.00 0.00
4 174 0.00 0.00 0.00
4 174 14 m³ 52 0.00 0.00 0.00
4 174 0.00 0.00 0.00
4 174 15 m³ 267 0.00 0.00 0.00
4 174 0.00 0.00 0.00
4 174 16 Item 5 0.00 0.00 0.00
4 175 0.00 0.00 0.00
EXTERNAL WORKS
Risk of collapse of excavations:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep
EXTERNAL WORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically vibrated:
EXTERNAL WORKS
In trenches, holes, etc under strip footings.
EXTERNAL WORKS
Selected earth filling supplied by the contractor under floor, etc (material to comply with CBR>40%) in layers and compacted to 98% Mod AASHTO density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc.
EXTERNAL WORKS
Keeping excavations free of water:
EXTERNAL WORKS
Keeping excavations free of all water other than subterranean water
EXTERNAL WORKS
25 MPa/19mm Unreinforced concrete:
4 175 17 m³ 131 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 18 m² 744 0.00 0.00 0.00
4 175 19 m² 893 0.00 0.00 0.00
4 175 20 m² 163 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 21 m 7441 0.00 0.00 0.00
4 175 22 m 8929 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 23 m² 163 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 24 On walls. m² 3274 0.00 0.00 0.00
4 175 25 m² 163 0.00 0.00 0.00
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Brickwork of cement bricks (7 MPa nominal compressive strength) in Class I mortar:
EXTERNAL WORKS
One brick walls in foundations.
EXTERNAL WORKS
One brick wall.
EXTERNAL WORKS
Two brick walls batress in foundations.
EXTERNAL WORKS
Brickwork reinforcement:
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally.
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally in foundations.
EXTERNAL WORKS
Joint forming material in movement joints:
EXTERNAL WORKS
10mm Bitumen impregnated fibre board built in vertically between brick skins.
EXTERNAL WORKS
External cement plaster on brickwalls:
EXTERNAL WORKSEXTERNAL WORKS
On narrow widths.
4 176 0.00 0.00 0.00
4 176 26 m² 3423 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 27 Trenches. m³ 14 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 28 m² 63 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 29 m³ 7 0.00 0.00 0.00
EXTERNAL WORKS
Remove all loose particles and laitance and apply one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA (allow sufficient time for drying between coats).
EXTERNAL WORKS
On external textured plaster walls.
EXTERNAL WORKS
THE FOLLOWING IN DRINKING FOUNTAIN
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc
4 176 0.00 0.00 0.00
4 176 30 m³ 8 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 31 m² 14 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 32 No. 8 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 33 m³ 7 0.00 0.00 0.00
4 177 34 m³ 4 0.00 0.00 0.00
EXTERNAL WORKS
Filling with material supplied by the Contractor compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Under floors, pavings, etc.
EXTERNAL WORKS
Approved brand of weedkiller mixed with proved brand of anti-termite soil poison and applied in accordance with the manufacturer's instructions:
EXTERNAL WORKS
To bottoms and sides of trenches, etc.
EXTERNAL WORKS
Precast concrete left rough from the mould including bedding, jointing and pointing:
EXTERNAL WORKS
1990mm Diameter concrete ring 465 mm wide x 150mm thick and with 100 x 75mm channel allround including necessary reinforcement.
EXTERNAL WORKS
20Mpa/19mm Concrete
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Pavings cast in panels.
4 177 0.00 0.00 0.00
4 177 35 m³ 7 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 36 No. 56 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 37 m² 48 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 38 m 84 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 39 m² 16 0.00 0.00 0.00
4 177 0.00 0.00 0.00
EXTERNAL WORKS
25 MPa/19mm Concrete:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc.
EXTERNAL WORKS
100mm Diameter fibre cement pipe filled solid with 25 MPa/19mm Concrete:
EXTERNAL WORKS
Column 1340mm long.
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a wood float:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Smooth Formwork to Sides:
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide circular exceeding 1m radius.
EXTERNAL WORKS
Permanent formwork to Soffits left in place:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc. propped up not exceeding 1,5m high.
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar:
4 177 40 m² 10 0.00 0.00 0.00
4 177 41 m² 8 0.00 0.00 0.00
4 178 42 m² 17 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 43 No. 64 0.00 0.00 0.00
4 178 Wire Mesh 0.00 0.00 0.00
4 178 44 m² 45 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 45 On walls. m² 28 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 46 No. 7 0.00 0.00 0.00
EXTERNAL WORKS
365mm Hollow walls of two half brick skins and cavity filled solid with hardcore filling no wire ties circular on plan in foundations.
EXTERNAL WORKS
One brick wall circular on plan.
EXTERNAL WORKS
Hollow walls of two half brick grilled skins and cavity filled with charcoal no wire ties circular on plan.
EXTERNAL WORKS
Metalwork Sundries:
EXTERNAL WORKS
1.5 x 19mm Flat metal ring 130mm diameter soldered to underside of water tray (water tray elsewhere measured.
EXTERNAL WORKS
EXTERNAL WORKS
Galvanised wire mesh with 6 x 6mm screen opening.
EXTERNAL WORKS
Cement plaster on brickwork:
EXTERNAL WORKSEXTERNAL WORKS
Galvanised sheet iron:
EXTERNAL WORKS
1.2mm Thick 1550mm Diameter tray 150mm deep including 2mm diameter holes drilled at 150mm centres in base.
4 178 0.00 0.00 0.00
4 178 47 No. 8 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 48 No. 56 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 49 m 48 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 50 No. 175 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 51 No. 7 0.00 0.00 0.00
5 183 0.00 0.00 0.00
EXTERNAL WORKS
Cobra Watertech' crutch handle and lockshield stopcocks:
EXTERNAL WORKS
15mm Rough brass F x F stoptap (code 121-15).
EXTERNAL WORKS
'Cobra Watertech' 'Demand' 'Mastermatic, etc. bibtaps:
EXTERNAL WORKS
15mm Rough brass 'Demand' bibtap (code KM2.203-15).
EXTERNAL WORKS
Class O copper pipes:
EXTERNAL WORKS
15mm Pipes.
EXTERNAL WORKS
Extra over class O copper pipes for capillary fittings:
EXTERNAL WORKS
15mm Fittings.
EXTERNAL WORKS
"Namibian Roto Mould" Plastic water tank:
EXTERNAL WORKS
1000l Water tank.
PROVISIONAL SUMS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
5 183 0.00 0.00 0.00
5 183 0.00 0.00 0.00
5 183 1 Item 1 0.00 0.00 0.00
5 183 2 Item 1 0.00 0.00 0.00
5 183 3 Item 1 0.00 0.00 0.00
5 183 0.00 0.00 0.00
5 183 0.00 0.00 0.00
5 183 4 Item 1 0.00 0.00 0.00
5 183 5 Item 1 0.00 0.00 0.00
5 183 6 Item 1 0.00 0.00 0.00
5 183 0.00 0.00 0.00
5 183 0.00 0.00 0.00
PROVISIONAL SUMS
JOINERY FITTINGS
PROVISIONAL SUMS
Joinery fittings:
PROVISIONAL SUMS
Provide the amount of N$100 000.00 (One Hundred Thousand Namibia Dollars) for the replacement of damaged Joinery Fittings and the supply and delivery of new Durashake cupboards.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
SEWER RETICULATION
PROVISIONAL SUMS
Sewer Reticulation:
PROVISIONAL SUMS
Provide the amount of N$ 350,000.00 (Three Hundred and Fifty Thousand Namibian Dollars) for complete replacement of the Khomas high school sewer system, checking and testing thereafter.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
WATER RETICULATION
PROVISIONAL SUMS
Water Reticulation:
5 183 7 Item 1 0.00 0.00 0.00
5 184 8 Item 1 0.00 0.00 0.00
5 184 9 Item 1 0.00 0.00 0.00
5 184 0.00 0.00 0.00
5 184 0.00 0.00 0.00
5 184 10 Item 1 0.00 0.00 0.00
5 184 11 Item 1 0.00 0.00 0.00
5 184 12 Item 1 0.00 0.00 0.00
PROVISIONAL SUMS
Provide the amount of N$ 300,000.00 (Three Hundred Thousand Namibian Dollars) for complete replacement of the Khomas High school water reticulation system, checking and testing thereafter.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
ELECTRICAL SUPPLY INSTALLATION
PROVISIONAL SUMS
Electrical supply installation:
PROVISIONAL SUMS
Provide the amount of N$ 100,000.00 (One Hundred Thousand Namibian Dollars) for Application of Electrical power supply to local Supply Authority, and for checking, testing and repairing all power circuits (schools own municipal connection and meter), for
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
Section Trade Page Item Description Uom Quantity Time Fixed Value
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
PRELIMINARIES
PREAMBLES FOR TRADES
PRELIMINARIES
The Model Preambles for Trades (2008 edition) as published by the Association of South African Quantity Surveyors shall be deemed to be incorporated in these bills of quantities and no claims arising from brevity of description of items fully described in
PRELIMINARIES
Supplementary preambles are incorporated in these bills of quantities to satisfy the requirements of this project. Such supplementary preambles shall take precedence over the provisions of the said Model Preambles
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 1 Item 1 0.00 0.00 0.00
1 2 2 Item 1 0.00 0.00 0.00
1 2 3 Item 1 0.00 0.00 0.00
1 2 4 Item 1 0.00 0.00 0.00
1 2 5 Item 1 0.00 0.00 0.00
1 2 6 Item 1 0.00 0.00 0.00
1 2 7 Item 1 0.00 0.00 0.00
1 3 8 Item 1 0.00 0.00 0.00
1 3 9 Item 1 0.00 0.00 0.00
1 3 10 Item 1 0.00 0.00 0.00
PRELIMINARIES
The contractor's prices for all items throughout these bills of quantities must take account of and include for all of the obligations, requirements and specifications given in the said Model Preambles and in any supplementary preambles
PRELIMINARIES
SECTION A - GENERAL CONDITIONS
PRELIMINARIES
1.0 - GENERAL PROVISIONS
PRELIMINARIES
Clause 1.1 - Definitions
PRELIMINARIES
Clause 1.2 - Interpretation
PRELIMINARIES
Clause 1.3 - Communications
PRELIMINARIES
Clause 1.4 - Law and Language
PRELIMINARIES
Clause 1.5 - Priority of Documents
PRELIMINARIES
Clause 1.6 - Contract Agreement
PRELIMINARIES
Clause 1.7 - Assigment
PRELIMINARIES
Clause 1.8 - Care and Supply of Documents
PRELIMINARIES
- Delayed Drawings or Instructions
PRELIMINARIES
Clause 1.10 - Employer's Use of Contractor's Documents
1 3 11 Item 1 0.00 0.00 0.00
1 3 12 Item 1 0.00 0.00 0.00
1 3 13 Item 1 0.00 0.00 0.00
1 3 14 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.11 - Contractor's Use of Employer's Documents
PRELIMINARIES
Clause 1.12 - Confidential Details
PRELIMINARIES
Clause 1.13 - Compliance with Laws
PRELIMINARIES
Clause 1.13 - Compliance with Laws[a]Contractor to comply with the Namibia Environmental Management Act No.7 of year 2007 as well as the Environmental Assessment Policy of year 1995 by implementing the Environmental Management Plans (EMP) documented se
1 3 15 Item 1 0.00 0.00 0.00
1 3 16 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 17 Item 1 0.00 0.00 0.00
1 4 18 Item 1 0.00 0.00 0.00
1 4 19 Item 1 0.00 0.00 0.00
1 4 20 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 21 Item 1 0.00 0.00 0.00
1 4 22 Item 1 0.00 0.00 0.00
1 4 23 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.13 - Compliance with Laws[b]Contractor to comply with the Namibia Public Health and Safety Management Policy under Act No. 11 of year 2007 by implementing the Public Health and Safety Awareness Plan (PHSAP) documented separately as part of th
PRELIMINARIES
Clause 1.14 - Joint and Several Liability
PRELIMINARIES
2.0 - THE EMPLOYER
PRELIMINARIES
Clause 2.1 - Right of Access to the Site
PRELIMINARIES
Clause 2.2 - Permits, Licences or Approvals
PRELIMINARIES
Clause 2.3 - Employer's Personnel
PRELIMINARIES
Clause 2.4 - Employer's Financial Arrangement
PRELIMINARIES
3.0 - THE ENGINEER
PRELIMINARIES
Clause 3.1 - Engineer's Duties and Authority
PRELIMINARIES
Clause 3.2 - Delegation by the Engineer
PRELIMINARIES
Clause 3.3 - Instructions of the Engineer
1 4 24 Item 1 0.00 0.00 0.00
1 4 25 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 26 Item 1 0.00 0.00 0.00
1 4 27 Item 1 0.00 0.00 0.00
1 4 28 Item 1 0.00 0.00 0.00
1 5 29 Item 1 0.00 0.00 0.00
1 5 30 Item 1 0.00 0.00 0.00
1 5 31 Item 1 0.00 0.00 0.00
1 5 32 Item 1 0.00 0.00 0.00
1 5 33 Item 1 0.00 0.00 0.00
1 5 34 Item 1 0.00 0.00 0.00
1 5 35 Item 1 0.00 0.00 0.00
1 5 36 Item 1 0.00 0.00 0.00
1 5 37 Item 1 0.00 0.00 0.00
1 5 38 Item 1 0.00 0.00 0.00
1 5 39 Item 1 0.00 0.00 0.00
1 5 40 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 3.4 - Replacement of the Engineer
PRELIMINARIES
Clause 3.5 - Determinations
PRELIMINARIES
4.0 - THE CONTRACTOR
PRELIMINARIES
Clause 4.1 - Contractor's General Obligations
PRELIMINARIES
Clause 4.2 - Performance Security
PRELIMINARIES
Clause 4.3 - Contactor's Security
PRELIMINARIES
Clause 4.4 - Subcontractors
PRELIMINARIES
Clause 4.5 - Assignment of Bennefit of Subcontract
PRELIMINARIES
Clause 4.6 - Co-operation
PRELIMINARIES
Clause 4.7 - Setting Out
PRELIMINARIES
Clause 4.8 - Safety Procedures
PRELIMINARIES
Clause 4.9 - Quality Assurance
PRELIMINARIES
Clause 4.10 - Site Data
PRELIMINARIES
Clause 4.11 - Sufficiency of the Accepted Contract Amount
PRELIMINARIES
Clause 4.12 - Unforseeable Physical Conditions
PRELIMINARIES
Clause 4.13 - Rights of Way and Facilities
PRELIMINARIES
Clause 4.14 - Avoidance of Interference
PRELIMINARIES
Clause 4.15 - Access Route
1 5 41 Item 1 0.00 0.00 0.00
1 6 42 Item 1 0.00 0.00 0.00
1 6 43 Item 1 0.00 0.00 0.00
1 6 44 Item 1 0.00 0.00 0.00
1 6 45 Item 1 0.00 0.00 0.00
1 6 46 Item 1 0.00 0.00 0.00
1 6 47 Item 1 0.00 0.00 0.00
1 6 48 Item 1 0.00 0.00 0.00
1 6 49 Item 1 0.00 0.00 0.00
1 6 0.00 0.00 0.00
1 6 50 Item 1 0.00 0.00 0.00
1 6 51 Item 1 0.00 0.00 0.00
1 6 52 Item 1 0.00 0.00 0.00
1 6 53 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
PRELIMINARIES
Clause 4.16 - Transport of Goods
PRELIMINARIES
Clause 4.17 - Contractor's Equipment
PRELIMINARIES
4.18 - Protection of the Enviroment
PRELIMINARIES
Clause 4.19 - Electricity, Water and Gas
PRELIMINARIES
Clause 4.20 - Employer's Equipment and Free-Issue Material
PRELIMINARIES
Clause 4.21 - Progress Reports
PRELIMINARIES
Clause 4.22 - Security of the Site
PRELIMINARIES
Clause 4.23 - Contractor's Operations on Site
PRELIMINARIES
Clause 4.24 - Fossils
PRELIMINARIES
5.0 - NOMINATED SUBCONTRACTORS
PRELIMINARIES
- Definition of "nominated Subcontractor"
PRELIMINARIES
Clause 5.2 - Objection to Nomination
PRELIMINARIES
Clause 5.3 - Payments to nominated Subcontractors
PRELIMINARIES
Clause 5.4 - Evidence of Payments
PRELIMINARIES
6.0 - STAFF AND LABOUR
1 7 54 Item 1 0.00 0.00 0.00
1 7 55 Item 1 0.00 0.00 0.00
1 7 56 Item 1 0.00 0.00 0.00
1 7 57 Item 1 0.00 0.00 0.00
1 7 58 Item 1 0.00 0.00 0.00
1 7 59 Item 1 0.00 0.00 0.00
1 7 60 Item 1 0.00 0.00 0.00
1 7 61 Item 1 0.00 0.00 0.00
1 7 62 Item 1 0.00 0.00 0.00
1 7 63 Item 1 0.00 0.00 0.00
1 7 64 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
1 7 65 Item 1 0.00 0.00 0.00
1 8 66 Item 1 0.00 0.00 0.00
1 8 67 Item 1 0.00 0.00 0.00
1 8 68 Item 1 0.00 0.00 0.00
1 8 69 Item 1 0.00 0.00 0.00
1 8 70 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 6.1 - Engagement of Staff and Labour
PRELIMINARIES
Clause 6.2 - Rates of Wages and Conditions of Labour
PRELIMINARIES
Clause 6.3 - Persons in the Service of Employer
PRELIMINARIES
Clause 6.4 - Labour Laws
PRELIMINARIES
Clause 6.5 - Working Hours
PRELIMINARIES
Clause 6.6 - Facilities for Staff and Labour
PRELIMINARIES
Clause 6.7 - Health and Safety
PRELIMINARIES
Clause 6.8 - Contractor's Superintendence
PRELIMINARIES
Clause 6.9 - Contractor's Personnel
PRELIMINARIES
Clause 6.10 - Records of Contractor's Personnel and Equipment
PRELIMINARIES
Clause 6.11 - Disorderly Conduct
PRELIMINARIES
7.0 - PLANT, MATERIALS AND WORKMANSHIP
PRELIMINARIES
Clause 7.1 - Manner of Execution
PRELIMINARIES
Clause 7.2 - Samples
PRELIMINARIES
Clause 7.3 - Inspection
PRELIMINARIES
Clause 7.4 - Testing
PRELIMINARIES
Clause 7.5 - Rejection
PRELIMINARIES
Clause 7.6 - Remedial Work
1 8 71 Item 1 0.00 0.00 0.00
1 8 72 Item 1 0.00 0.00 0.00
1 8 0.00 0.00 0.00
1 8 73 Item 1 0.00 0.00 0.00
1 8 74 Item 1 0.00 0.00 0.00
1 8 75 Item 1 0.00 0.00 0.00
1 8 76 Item 1 0.00 0.00 0.00
1 8 77 Item 1 0.00 0.00 0.00
1 8 78 Item 1 0.00 0.00 0.00
1 9 79 Item 1 0.00 0.00 0.00
1 9 80 Item 1 0.00 0.00 0.00
1 9 81 Item 1 0.00 0.00 0.00
1 9 82 Item 1 0.00 0.00 0.00
1 9 83 Item 1 0.00 0.00 0.00
1 9 84 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 85 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 7.7 - Ownership of Plant and Material
PRELIMINARIES
Clause 7.8 - Royalties
PRELIMINARIES
8.0 - COMMENCEMENT, DELAYS AND SUSPENSION
PRELIMINARIES
Clause 8.1 - Commencement of Works
PRELIMINARIES
Clause 8.2 - Time for Completion
PRELIMINARIES
- Programme
PRELIMINARIES
Clause 8.4 - Extension of Time for Completion
PRELIMINARIES
Clause 8.5 - Delays cuased by Authorities
PRELIMINARIES
Clause 8.6 - Rate of Progress
PRELIMINARIES
Clause 8.7 - Delay Damages
PRELIMINARIES
Clause 8.8 - Suspension of Work
PRELIMINARIES
Clause 8.9 - Consequences of Suspension
PRELIMINARIES
Clause 8.10 - Payment for Plant and Materials in Event of Suspension
PRELIMINARIES
Clause 8.11 - Prolonged Suspension
PRELIMINARIES
Clause 8.12 - Resumption of Work
PRELIMINARIES
9.0 - TESTS ON COMPLETION
PRELIMINARIES
- Contractor's Obligation
1 9 86 Item 1 0.00 0.00 0.00
1 9 87 Item 1 0.00 0.00 0.00
1 9 88 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 89 Item 1 0.00 0.00 0.00
1 9 90 Item 1 0.00 0.00 0.00
1 10 91 Item 1 0.00 0.00 0.00
1 10 92 Item 1 0.00 0.00 0.00
1 10 0.00 0.00 0.00
1 10 93 Item 1 0.00 0.00 0.00
1 10 94 Item 1 0.00 0.00 0.00
1 10 95 Item 1 0.00 0.00 0.00
1 10 96 Item 1 0.00 0.00 0.00
1 10 97 Item 1 0.00 0.00 0.00
1 10 98 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 9.2 - Delayed Tests
PRELIMINARIES
Clause 9.3 - Retesting
PRELIMINARIES
Clause 9.4 - Failure to Pass Tests on Completion
PRELIMINARIES
10.0 - EMPLOYER'S TAKING OVER
PRELIMINARIES
Clause 10.1 - Taking Over of the Works and Sections
PRELIMINARIES
Clause 10.2 - Taking Over of Parts of the Works
PRELIMINARIES
Clause 10.3 - Interference with Tests on Completion
PRELIMINARIES
Clause 10.4 - Surfaces Requiring Reinstatement
PRELIMINARIES
11.0 - DEFECTS LIABILITY
PRELIMINARIES
Clause 11.1 - Completion of Outstandin g Work and Remedying Defects
PRELIMINARIES
Clause 11.2 - Cost of Remedying Defects
PRELIMINARIES
Clause 11.3 - Extension of Defects Notification Period
PRELIMINARIES
Clause 11.4 - Failure to Remedy Defects
PRELIMINARIES
Clause 11.5 - Removal of Defective Work
PRELIMINARIES
Clause 11.6 - Further Tests
1 10 99 Item 1 0.00 0.00 0.00
1 10 100 Item 1 0.00 0.00 0.00
1 10 101 Item 1 0.00 0.00 0.00
1 10 102 Item 1 0.00 0.00 0.00
1 10 103 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 104 Item 1 0.00 0.00 0.00
1 11 105 Item 1 0.00 0.00 0.00
1 11 106 Item 1 0.00 0.00 0.00
1 11 107 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 108 Item 1 0.00 0.00 0.00
1 11 109 Item 1 0.00 0.00 0.00
1 11 110 Item 1 0.00 0.00 0.00
1 11 111 Item 1 0.00 0.00 0.00
1 11 112 Item 1 0.00 0.00 0.00
1 11 113 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 11.7 - Right of Access
PRELIMINARIES
Clause 11.8 - Contractor to Search
PRELIMINARIES
Clause 11.9 - Performance Certificate
PRELIMINARIES
Clause 11.10 - Unfulfilled Obligations
PRELIMINARIES
Clause 11.11 - Clearance of Site
PRELIMINARIES
12.0 - MEASUREMENT AND EVALUATION LIABILITY
PRELIMINARIES
Clause 12.1 - Works to be Measured
PRELIMINARIES
Clause 12.2 - Method of Measurement
PRELIMINARIES
Clause 12.3 - Evaluation
PRELIMINARIES
Clause 12.4 - Ommisions
PRELIMINARIES
13.0 - VARIATIONS AND ADJUSTMENTS
PRELIMINARIES
Clause 13.1 - Right to Vary
PRELIMINARIES
13.2 - Value Engineering
PRELIMINARIES
Clause 13.3 - Variation Procedure
PRELIMINARIES
Clause 13.4 - Payment in Applicable Currencies
PRELIMINARIES
Clause 13.5 - Provisional Sums
PRELIMINARIES
Clause 13.6 - Daywork
1 11 114 Item 1 0.00 0.00 0.00
1 11 115 Item 1 0.00 0.00 0.00
1 12 0.00 0.00 0.00
1 12 116 Item 1 0.00 0.00 0.00
1 12 117 Item 1 0.00 0.00 0.00
1 12 118 Item 1 0.00 0.00 0.00
1 12 119 Item 1 0.00 0.00 0.00
1 12 120 Item 1 0.00 0.00 0.00
1 12 121 Item 1 0.00 0.00 0.00
1 12 122 Item 1 0.00 0.00 0.00
1 12 123 Item 1 0.00 0.00 0.00
1 12 124 Item 1 0.00 0.00 0.00
1 12 125 Item 1 0.00 0.00 0.00
1 12 126 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 13.7 - Adjustments for Changes in Legislation
PRELIMINARIES
Clause 13.8 - Adjustments for Changes in Cost
PRELIMINARIES
14.0 - CONTRACT PRICE AND PAYMENTS
PRELIMINARIES
Clause 14.1 - The Contract Price
PRELIMINARIES
Clause 14.2 - Advance Payment
PRELIMINARIES
Clause 14.3 - Application for Iterim Payment Certificates
PRELIMINARIES
Clause 14.4 - Schedule of Payments
PRELIMINARIES
Clause 14.5 - Plant and Materials Intended for the Works
PRELIMINARIES
Clause 14.6 - Issue of Interim Payment Certificates
PRELIMINARIES
Clause 14.7 - Payment
PRELIMINARIES
Clause 14.8 - Delayed Payment
PRELIMINARIES
Clause 14.9 - Payment of Retention Money
PRELIMINARIES
Clause 14.10 - Statement at Completion
PRELIMINARIES
Clause 14.11 - Application for Final Payment Certificate
1 12 127 Item 1 0.00 0.00 0.00
1 12 128 Item 1 0.00 0.00 0.00
1 13 129 Item 1 0.00 0.00 0.00
1 13 130 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 131 Item 1 0.00 0.00 0.00
1 13 132 Item 1 0.00 0.00 0.00
1 13 133 Item 1 0.00 0.00 0.00
1 13 134 Item 1 0.00 0.00 0.00
1 13 135 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 136 Item 1 0.00 0.00 0.00
1 13 137 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 14.12 - Discharge
PRELIMINARIES
Clause 14.13 - Issue of Final Payment Certificate
PRELIMINARIES
Clause 14.14 - Cessation of Employer's Liability
PRELIMINARIES
Clause 14.15 - Currencies of Payment
PRELIMINARIES
15.0 - TERMINATION BY EMPLOYER
PRELIMINARIES
Clause 15.1 - Notice to Correct
PRELIMINARIES
Clause 15.2 - Termination by Employer
PRELIMINARIES
15.3 - Valuation at Date of Termination
PRELIMINARIES
15.4 - Payment after Termination
PRELIMINARIES
15.5 - Empoyer's Entitlement to Termination
PRELIMINARIES
16.0 - SUPSENSION AND TERMINATION BY CONTRACTOR
PRELIMINARIES
Clause 16.1 - Contractor's Entitlement to Suspend Work
PRELIMINARIES
Clause 16.2 - Termination by Contractor
1 13 138 Item 1 0.00 0.00 0.00
1 13 139 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 140 Item 1 0.00 0.00 0.00
1 14 141 Item 1 0.00 0.00 0.00
1 14 142 Item 1 0.00 0.00 0.00
1 14 143 Item 1 0.00 0.00 0.00
1 14 144 Item 1 0.00 0.00 0.00
1 14 145 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 146 Item 1 0.00 0.00 0.00
1 14 147 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 16.3 - Cessasion of Work and Removal of Contractor's Equipment
PRELIMINARIES
16.4 - Payment on Termination
PRELIMINARIES
17.0 - RISK AND RESPONSIBILITY
PRELIMINARIES
Clause 17.1 - Indemnities
PRELIMINARIES
Clause 17.2 - Contractor's Care of the Works
PRELIMINARIES
Clause 17.3 - Employer's Risks
PRELIMINARIES
Clause 17.4 - Consequences of Employer's Risks
PRELIMINARIES
Clause 17.5 - Intellectual and Industrial Property Rights
PRELIMINARIES
Clause 17.6 - Limitation of Liability
PRELIMINARIES
18.0 - INSURANCE
PRELIMINARIES
Clause 18.1 - General Requierments for Insurances
PRELIMINARIES
Clause 18.2 - Insurance for Works and Contractor's Equipment
1 14 148 Item 1 0.00 0.00 0.00
1 14 149 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 150 Item 1 0.00 0.00 0.00
1 14 151 Item 1 0.00 0.00 0.00
1 14 152 Item 1 0.00 0.00 0.00
1 15 153 Item 1 0.00 0.00 0.00
1 15 154 Item 1 0.00 0.00 0.00
1 15 155 Item 1 0.00 0.00 0.00
1 15 156 Item 1 0.00 0.00 0.00
1 15 0.00 0.00 0.00
1 15 157 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 18.3 - Insurance against Injury to Persons and Damage to Property
PRELIMINARIES
Clause 18.4 - Insurance for Contractor's Personnel
PRELIMINARIES
19.0 - FORCE MAJEURE
PRELIMINARIES
Clause 19.1 - Definition of Force Majuere
PRELIMINARIES
Clause 19.2 - Notice of Force Majuere
PRELIMINARIES
Clause 19.3 - Duty to Minimise Delay
PRELIMINARIES
Clause 19.4 - Consequences of Force Majuere
PRELIMINARIES
Clause 19.5 - Force Majuere Affecting Subcontractor
PRELIMINARIES
Clause 19.6 - Optional Termination, Payment and Release
PRELIMINARIES
Clause 19.7 - Release from Performance under the Law
PRELIMINARIES
20.0 - CLAIMS, DISPUTES AND ARBITRATION
PRELIMINARIES
Clause 20.1 - Contractors Claim
1 15 158 Item 1 0.00 0.00 0.00
1 15 159 Item 1 0.00 0.00 0.00
1 15 160 Item 1 0.00 0.00 0.00
1 15 161 Item 1 0.00 0.00 0.00
1 15 162 Item 1 0.00 0.00 0.00
1 15 163 Item 1 0.00 0.00 0.00
1 15 164 Item 1 0.00 0.00 0.00
1 16 0.00 0.00 0.00
PRELIMINARIES
Clause 20.2 - Appointment of the Dispute Adjudication Board
PRELIMINARIES
Clause 20.3 - Failire to Agree Dispute Adjudication Board
PRELIMINARIES
Clause 20.4 - Obtaining Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.5 - Amicable Settlement
PRELIMINARIES
Clause 20.6 - Arbitration
PRELIMINARIES
Clause 20.7 - Failure to Comply Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.8 - Expiry of Dispute Adjudication Board's Appointment
PRELIMINARIES
SECTION B - MODEL PRELIMINARIES
1 16 0.00 0.00 0.00
1 16 0.00 0.00 0.00
1 16 165 Item 1 0.00 0.00 0.00
1 16 166 Item 1 0.00 0.00 0.00
PRELIMINARIES
Model Preliminary Document can be purchased from the Institute of Namibian Quantity Surveyor's offices situated at c/o Hugo Hahn St and Nelson Mandela Ave, Klein Windhoek, Windhoek during week days from 8H00 to 12H00.
All references in this document ma
PRELIMINARIES
B1: Supplementary Documentation
PRELIMINARIES
B1.1: Bills of Quantities
These Bills of Quantities contain pages and annexures as indexed on the flyleaf.
These Bills of Quantities are consecutively numbered and the Tenderer is required to check the number of pages and should any be found missing
PRELIMINARIES
B1.2: Provisional Bills of Quantities
1 16 167 Item 1 0.00 0.00 0.00
1 17 168 Item 1 0.00 0.00 0.00
1 17 169 Item 1 0.00 0.00 0.00
1 17 170 Item 1 0.00 0.00 0.00
1 17 171 Item 1 0.00 0.00 0.00
1 17 172 Item 1 0.00 0.00 0.00
1 17 173 Item 1 0.00 0.00 0.00
1 17 174 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.3: Availability of Construction Documentation for contracts based on Provisional Bills of Quantities
PRELIMINARIES
B1.4: Name of Architect, Quantity Surveyor and Specialist Consultants
Refer to the Appedix To Tender
PRELIMINARIES
B1.5: Lodging and Scrutiny of priced Bills of Quantities.
These Bills of Quantities must be extended in black ink.
PRELIMINARIES
B1.6: Meaning of Words
PRELIMINARIES
B1.7: Performance Guarantee by Contractor
PRELIMINARIES
B1.8: Payment Guarantee by Employer
PRELIMINARIES
B1.9: Waiver of Contractor's Lien
PRELIMINARIES
B1.10: Signing powers
1 17 175 Item 1 0.00 0.00 0.00
1 17 176 Item 1 0.00 0.00 0.00
1 18 B2 The Site 0.00 0.00 0.00
1 18 177 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.11: Tenders
Notwithstanding anything contained in this clause, tenders shall be valid for a period as stipulated in the separate Bid Invitation Documents, from the closing date of tenders.
The Employer reserves the right to correct any arithmetic
PRELIMINARIES
B1.12: Inspection of Documents
PRELIMINARIES
PRELIMINARIES
B2.1: Site and Bounderies
The sites will be as indicated on the site plans in the Bidding Documents.
1 18 178 Item 1 0.00 0.00 0.00
1 18 179 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.2: Area of the Works
The Area of the Works to be occupied by the Contractor, any restriction on the area and the limit of access or exit will be pointed out to the Contractor by the Engineer on handing over of the Site.
PRELIMINARIES
B2.3: Boundary Beacons, setting-out pegs and master datum
The Contractor shall notify the Engineer if any encroachments of adjoining foundations, buildings, structures, pavements, etc., exist so that the necessary arrangements can be made for the rect
1 18 180 Item 1 0.00 0.00 0.00
1 18 181 Item 1 0.00 0.00 0.00
1 18 182 Item 1 0.00 0.00 0.00
1 18 183 Item 1 0.00 0.00 0.00
1 19 184 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.4: Site soil investigation
No site soil investigation report is available and the Tenderer is advised to inspect the site to ascertain the exact nature of the ground and report to the Engineer.
PRELIMINARIES
B2.5 : Viewing of the Site
No claims for extras arising from the Contractor having failed to comply with this Clause will be entertained.
PRELIMINARIES
B2.6: Existing premises occupied
PRELIMINARIES
B2.7: Dimensional accuracy of work executed under the previous contract
PRELIMINARIES
B2.8: Patent Defects in work executed under the previous contract
1 19 185 Item 1 0.00 0.00 0.00
1 19 186 Item 1 0.00 0.00 0.00
1 19 187 Item 1 0.00 0.00 0.00
1 19 188 Item 1 0.00 0.00 0.00
1 19 189 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 190 Item 1 0.00 0.00 0.00
1 19 191 Item 1 0.00 0.00 0.00
1 19 192 Item 1 0.00 0.00 0.00
1 19 193 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 194 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.9: Existing known services
Existing services and points of connection are shown on the Site plan or will be pointed out on the Site by the Engineer.
PRELIMINARIES
B2.10: Unknown Services
PRELIMINARIES
B2.11: Protection of trees
PRELIMINARIES
B2.12: Articles of Value
PRELIMINARIES
B2.13: Inspection of nearby properties etc.
PRELIMINARIES
B3 Management of Contract
PRELIMINARIES
B3.1: Management of Works
PRELIMINARIES
B3.2: Programming of The Works
The Contract shall be programmed by the Contractor in accordance with Alternative A
PRELIMINARIES
B3.3: Progress Meetings
PRELIMINARIES
B3.4: Technical Meetings
PRELIMINARIES
B4: Materials and Workmanship
PRELIMINARIES
B4.1: Samples of materials
1 20 195 Item 1 0.00 0.00 0.00
1 20 196 Item 1 0.00 0.00 0.00
1 20 0.00 0.00 0.00
1 20 197 Item 1 0.00 0.00 0.00
1 20 198 Item 1 0.00 0.00 0.00
1 20 199 Item 1 0.00 0.00 0.00
1 20 200 Item 1 0.00 0.00 0.00
1 20 201 Item 1 0.00 0.00 0.00
1 20 202 Item 1 0.00 0.00 0.00
PRELIMINARIES
B4.2: Samples of workmanship and mockups
PRELIMINARIES
B4.3: Ordering of materials
PRELIMINARIES
B5: Temporary Works and Plant
PRELIMINARIES
B5.1: Deposits and Fees
PRELIMINARIES
B5.2: Enclosure of Works
PRELIMINARIES
B5.3: Pavement crossings and parking meters
PRELIMINARIES
B5.4: Advertising
PRELIMINARIES
B5.5: Plant and Equipment
PRELIMINARIES
B5.6: Special Scaffolding
No special scaffolding is measured as these Bills of Quantities are based on the Sixth edition of the Standard System for Measuring Building Work.
1 20 203 Item 1 0.00 0.00 0.00
1 20 204 Item 1 0.00 0.00 0.00
1 20 205 Item 1 0.00 0.00 0.00
1 21 206 Item 1 0.00 0.00 0.00
1 21 207 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 208 Item 1 0.00 0.00 0.00
PRELIMINARIES
B5.7: Contractor's Offices and Sheds
Under NO circumstances may any of the buildings at any stage be used for temporary accommodation for workers, contractor's offices or the storage of materials.
PRELIMINARIES
B5.8: Offices
PRELIMINARIES
B5.9: Office of the Clerk of Works
PRELIMINARIES
B5.10: Main Noticeboards (one per site).
PRELIMINARIES
B5.11: Subcontractors' Noticeboard
PRELIMINARIES
B6: Temporary Services
PRELIMINARIES
B6.1: Water
The contractor shall provide water for The Works in accordance with Alternative A
1 21 209 Item 1 0.00 0.00 0.00
1 21 210 Item 1 0.00 0.00 0.00
1 21 211 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 212 Item 1 0.00 0.00 0.00
PRELIMINARIES
B6.2: Electricity and Lighting
The contractor shall provide electricity and lighting for The Works in accordance with Alternative A
PRELIMINARIES
B6.3: Telephones
The contractor shall provide telephones for the Works in accordance with Alternative A
PRELIMINARIES
B6.4: Toilets
The contractor shall provide toilets for The Works in accordance with Alternative A
PRELIMINARIES
B7: Prime Cost and Provisional Amounts
PRELIMINARIES
B7.1: Cash Discount
All Prime Cost and Provisional Sums are net and do not include a cash discount, nor will the Contractor be allowed or entitled to a cash discount.
1 21 213 Item 1 0.00 0.00 0.00
1 22 214 Item 1 0.00 0.00 0.00
1 22 215 Item 1 0.00 0.00 0.00
1 22 216 Item 1 0.00 0.00 0.00
1 22 0.00 0.00 0.00
1 22 217 Item 1 0.00 0.00 0.00
1 22 218 N/A 1 0.00 0.00 0.00
PRELIMINARIES
B7.2: Taking delivery and fixing of prime cost items
PRELIMINARIES
B7.3: Nominated or Selected Subcontract Documents
PRELIMINARIES
B7.4: Attendance on Nominated or Selected Subcontractors
PRELIMINARIES
B7.5: Fuel, power and water for commissioning of mechanical and other specialised installations
PRELIMINARIES
B8: Financial Aspects
PRELIMINARIES
B8.1: Sales Taxes
Delete the whole of this clause and replace with the following:
B8.1: Taxes, etc.
Provision is made in the separate Bid Invitation Documents for the inclusion of Value Added Tax (VAT) at 15%. The Contractor shall price these B
PRELIMINARIES
B8.2: Contract price adjusment provisions
1 22 219 Item 1 0.00 0.00 0.00
1 22 220 Item 1 0.00 0.00 0.00
1 23 221 Item 1 0.00 0.00 0.00
1 23 222 N/A 1 0.00 0.00 0.00
1 23 223 Item 1 0.00 0.00 0.00
PRELIMINARIES
B8.3: Payment of Preliminaries
Payment of Preliminaries will be calculated from the priced items within the Preliminaries in accordance with Alternative B
In addition to the exclusions mentioned in the third paragraph of this clause it shall be deem
PRELIMINARIES
B8.4: Adjustment of Preliminaries
The Adjustment of Preliminaries will be on the basis of fixed price, value related and time related items in accordance with Method 3.
In addition to the exclusions mentioned in the this paragraph of this clause it
PRELIMINARIES
B8.5: Certificate payment projection
PRELIMINARIES
B8.6: Dayworks
PRELIMINARIES
B8.7: Information supplied by Contractor
1 23 0.00 0.00 0.00
1 23 224 Item 1 0.00 0.00 0.00
1 23 225 Item 1 0.00 0.00 0.00
1 23 226 Item 1 0.00 0.00 0.00
1 23 227 Item 1 0.00 0.00 0.00
1 23 228 Item 1 0.00 0.00 0.00
1 23 229 Item 1 0.00 0.00 0.00
1 23 230 Item 1 0.00 0.00 0.00
1 23 231 Item 1 0.00 0.00 0.00
1 24 232 Item 1 0.00 0.00 0.00
1 24 233 Item 1 0.00 0.00 0.00
1 24 0.00 0.00 0.00
1 24 234 Item 1 0.00 0.00 0.00
PRELIMINARIES
B9: General
PRELIMINARIES
B9.1: Protection
PRELIMINARIES
B9.2: Protection of existing and/or partially occupied works.
PRELIMINARIES
B9.3: Safety
PRELIMINARIES
B9.4: Site security
PRELIMINARIES
B9.5: Notice before covering work
PRELIMINARIES
B9.6: Disturbance
PRELIMINARIES
B9.7: Clearing and cleaning
PRELIMINARIES
B9.8: Vermin
PRELIMINARIES
B9.9: Overhand Work
PRELIMINARIES
B9.10: Jobbing
PRELIMINARIES
SECTION C - SPECIFIC PRELIMINARIES
PRELIMINARIES
Site instructions
Instructions issued on site are to be recorded in triplicate in a site instruction book which is to be maintained on site by the contractor
1 24 235 Item 1 0.00 0.00 0.00
1 24 236 Item 1 0.00 0.00 0.00
PRELIMINARIES
Warranties for material and workmanship
Where warranties for materials and/or workmanship are called for, the contractor shall obtain a written warranty, addressed to the employer, from the firm supplying the materials and/or doing the work and shall d
PRELIMINARIES
Co-operation of contractor for cost management
It is specifically agreed that the contractor accepts the obligation of assisting the engineer in implementing proper cost management. The contractor will be advised by the engineer of all cost management
1 25 237 Item 1 0.00 0.00 0.00
1 25 238 Item 1 0.00 0.00 0.00
PRELIMINARIES
Testing of windows for watertightness
Each window shall be tested for watertightness with water sprayed on using adequate pressure. If in the opinion of the engineer, the pressure proves to be inadequate, then the pressure shall be boosted by means of
PRELIMINARIES
Revenue Stamps
The Contractor must allow for and provide all necessary revenue stamps require.
1 25 239 Item 1 0.00 0.00 0.00
1 25 240 Item 1 0.00 0.00 0.00
PRELIMINARIES
Proprietary Branded Products.
The Contractor shall take delivery of, handle, store, use, apply and/or fix all proprietary branded products in strict accordance with the manufacturers' instructions after consultation with the manufacturer's authorised r
PRELIMINARIES
Non-Cession of Monies
The Contractor shall not cede nor assign his rights or claims to any monies due or to become due under this contract.
1 25 241 Item 1 0.00 0.00 0.00
1 25 242 Item 1 0.00 0.00 0.00
PRELIMINARIES
As Built Drawings
The position of construction breaks and the extent of individual concrete pours are to be recorded by the Contractor on the Structural Engineer's drawings and are to be submitted to the Architect and the Structural Engineer for their
PRELIMINARIES
Social Security
The contractor shall provide for and effect Social Security for all his/her employees on the works in respect of the Social Security Act and will also instruct all his sub-contractors to do the same.
1 26 243 Item 1 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
PRELIMINARIES
nt of Namibian People
The contractor is encouraged to employ Namibian citizens for skilled and semi skilled artisans and employ unskilled labour from the area of interventions.
All Namibian skilled artisans and Namibian unskilled employees a
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Making good damaged work:
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 1 m 163 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
Making good damaged work, etc:
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
Steps and pavers
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Taking out and removing doors, screen gates, etc including thresholds, sills, etc in one brick walls including making good cement plaster and paintwork on both sides:
2 32 2 No. 12 0.00 0.00 0.00
2 32 3 No. 61 0.00 0.00 0.00
2 32 4 No. 66 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 5 No. 21 0.00 0.00 0.00
2 32 6 No. 72 0.00 0.00 0.00
2 32 7 No. 143 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 8 m² 3362 0.00 0.00 0.00
ALTERATIONS
Steel screen gate and frame 813 x 2031mm high overall from one brickwall.
ALTERATIONS
Timber single door 813 x 2,031mm high overall from one brickwall.
ALTERATIONS
single door 813 x 2,031mm high overall from one brickwall.
ALTERATIONS
Taking out and removing doors, windows, etc from one brickwall (windows to be set aside for re-use):
ALTERATIONS
Glazed steel windows 800 x 1,300mm high from one brick wall.
ALTERATIONS
Glazed steel window 1,600 x 900m high from one brick wall.
ALTERATIONS
Glazed steel window 1,700 x 1,200m high from one brick wall.
ALTERATIONS
Taking down and removing roofs, floors, panelling, ceilings, partitions, etc:
ALTERATIONS
Nailed up celotex ceilings.
2 32 9 m² 473 0.00 0.00 0.00
2 32 10 m² 224 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 11 m 1415 0.00 0.00 0.00
2 33 12 m 1415 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 13 m² 473 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 14 No. 100 0.00 0.00 0.00
2 33 15 No. 23 0.00 0.00 0.00
ALTERATIONS
Vinyl tile floor covering including preparing screed for new vinyl floor covering.
ALTERATIONS
Gypsum Rhinoboard ceilings including cornices, timber brandering, etc.
ALTERATIONS
Taking out and removing sundry joinery work:
ALTERATIONS
Timber cornices from brickwork.
ALTERATIONS
Timber skirtings from brickwork.
ALTERATIONS
Taking up and removing vinyl floor coverings, carpeting, etc:
ALTERATIONS
Vinyl tile floor covering including preparing screed for new vinyl floor covering.
ALTERATIONS
Taking out and removing ironmongery:
ALTERATIONS
Mortice lock and striking plate from steel door and steel frame.
ALTERATIONS
lock and striking plate from timber door and steel frame.
2 33 0.00 0.00 0.00
2 33 16 m² 119 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 17 m² 2188 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 18 m² 473 0.00 0.00 0.00
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and preparing surfaces for new screeds, plaster, etc:
ALTERATIONS
Plasters from walls or columns in patches.
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and brush hammering surfaces for new screeds, plaster, etc:
ALTERATIONS
50mm Screed from floors (internal and external).
ALTERATIONS
Hacking up/off and removing ceramic tile floor and wall finishes including removing mortar bed or backing and preparing concrete or brick surfaces for new screed, plaster or tile finishes:
ALTERATIONS
300 x 300mm Tiles to floors.
2 33 0.00 0.00 0.00
2 33 19 No. 20 0.00 0.00 0.00
2 34 20 No. 10 0.00 0.00 0.00
2 34 21 No. 10 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 22 m² 25 0.00 0.00 0.00
2 34 0.00 0.00 0.00
ALTERATIONS
Taking out and removing piping, sanitary fittings, etc including disconnecting piping from fittings and making good floor and wall finishes (making good tiling and paintwork elsewhere):
ALTERATIONS
Broken polyethylene low level WC.
ALTERATIONS
Broken vitreous china WHB
ALTERATIONS
Broken stainless steel WHB
ALTERATIONS
Taking out and removing broken glass from windows/door panes and mirrors:
ALTERATIONS
Broken glass from steel windows including cleaning out rebates and preparing for new glass.
ALTERATIONS
Charts and learning material on walls
2 34 23 Item 0 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 24 m² 38 0.00 0.00 0.00
2 34 25 m² 33 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 26 m² 4420 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 27 m² 129 0.00 0.00 0.00
ALTERATIONS
Allow for removal of learning charts and material ( and putting back thereafter), from walls and pinning boards so as to expose surfaces to be painted.
ALTERATIONS
BUILDING UP OPENINGS
ALTERATIONS
Brickwork in cement bricks [7 Mpa] in class I mortar in building up:
ALTERATIONS
Half brick walls.
ALTERATIONS
One brick walls.
ALTERATIONS
MAKING GOOD OF FINISHES, ETC.
ALTERATIONS
Making good existing metal ceilings:
ALTERATIONS
Clean ceilings from any organic matters and dirts, apply disinfenctants and pets poison in the roof space before installing ceiling, make good on completion, taking utmost care not to damage the ceilings.
ALTERATIONS
Making good 300 x 300mm ceramic floor tiles:
ALTERATIONS
Floors in patches.
2 35 0.00 0.00 0.00
2 35 28 m² 43 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 29 m 1932 0.00 0.00 0.00
2 35 30 m 1771 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Making good external bagged finish to cement plaster:
ALTERATIONS
Walls in patches.
ALTERATIONS
REMEDIAL WORKS
ALTERATIONS
Roof timber rafters:
ALTERATIONS
Replace broken or missing eaves purlin with 50 x 76mm wrot softwood purlin, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
Reinforcing the exiting timber tie beam size 114 x 38mm wrot softwood complete with rafter feets, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
ROOF LEAKS REPAIRS AND SEALING
2 35 0.00 0.00 0.00
2 35 31 m² 4568 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Inspect, re-fastened, replace missing screws, and seal roof screws, gaps, overlaps, holes, flashings, etc with 'Klodek Glass fibre fabric with two coats of sealant' where necessary to leave in perfect waterproof condition on completion:
ALTERATIONS
On existing IBR roof covering.
ALTERATIONS
PLASTER REPAIRS
ALTERATIONS
General Notes
ALTERATIONS
Supplementary preamble:
ALTERATIONS
All plaster repair admixtures are to be applied strictly in accordance with the "abe Construction Chemicals" or similar approved requirements. Break out all loose and hollow plaster at least 20 mm wide all around loose plaster area, brush clean of all loo
2 35 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 32 On walls m 119 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 33 m 430 0.00 0.00 0.00
ALTERATIONS
Repair crack in plastered walls by hacking off existing plaster to 300mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'epidermix'/ 'mendell 90' or similar approved crack repair product, cover with 13mm c
ALTERATIONS
Repairs cracked plaster as noted above:
ALTERATIONS
ALTERATIONS
Repair crack in screeded floors by hacking off the existing screed to expose the concrete surface, 200mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'abe epidermix 344' or similar approved 'wet to dry'
ALTERATIONS
Repairs cracked floors as noted above:
ALTERATIONS
On concrete floors
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 1 m³ 651 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 2 Soft rock. m³ 130 0.00 0.00 0.00
2 38 3 Hard rock. m³ 33 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 4 m² 307 0.00 0.00 0.00
2 38 0.00 0.00 0.00
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKS
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
CARTING AWAY.
2 38 0.00 0.00 0.00
2 38 5 m³ 651 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 6 m³ 659 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Surface Preparation:
2 39 7 m² 1639 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of natural ground and/or excavated surfaces to receive concrete surface beds, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum dens
EARTHWORKS
SOIL POISONING
EARTHWORKS
Approved brand of anti-termite soil poison mixed with weedkiller applied by a Registered Pest Control company and guaranteed against termite infestation for ten years, strictly according to manufacturer's instructions:
2 39 8 m² 1639 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 1 m³ 404 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a power float:
2 41 2 m² 1639 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 3 m 1965 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 4 m 1965 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 5 m² 1640 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls and currents.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II) (CPAP Work Group No 111)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT (PROVISIONAL) (CPAP Work Group No 114)
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.SUPPLEMENTARY PREAMBLESBRICKWORKBrick reinforcements:
The brickwork reinforcements have been measured on every course in foundations brickworks, every third course in superstructure brickwork, and every course in the beamfilling brickwork.Sizes in descriptions:
Where sizes in descriptions are given in brick units, 'one brick' shall represent the length and 'half brick' the width of a brick.Hollow walls etc:
2 MASONRY 42 0.00 0.00 0.00 2 MASONRY 42 Pointing: 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 1 m 183 0.00 0.00 0.00
2 MASONRY 42 2 m 252 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
Descriptions of hollow walls shall be deemed to include leaving every fifth perpend of the bottom course of the external skin open as a weep hole.
Descriptions of recessed pointing to fair face brickwork and face brickwork shall be deemed to include square recessed, hollow recessed, weathered pointing, etc.BRICKWORK SUNDRIESBrickwork reinforcement:75mm Wide reinforcement built in horizontally.
150mm Wide reinforcement built in horizontally.Cement wash of 1:3 liquid cement and sand mixture applied with a brush, on previously cement washed surfaces:
2 MASONRY 42 3 m² 69 0.00 0.00 0.00
2 MASONRY 43 4 m² 88 0.00 0.00 0.00
2 MASONRY 43 0.00 0.00 0.00
2 MASONRY 43 5 m 16 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 1 m 81 0.00 0.00 0.00
2 45 SKIRTINGS 0.00 0.00 0.00
2 45 Supawood: 0.00 0.00 0.00
2 45 2 m 196 0.00 0.00 0.00
On concrete surfaces including removing fins, irregularities,etc.On brick surfaces.Prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
EAVES, VERGES, ETC
CARPENTRY AND JOINERY
Everite FC77 pressed fibre-cement:
CARPENTRY AND JOINERY
230 x 6mm Fascias and barge boards including galvanised steel H-profile jointing strips.
CARPENTRY AND JOINERYCARPENTRY AND JOINERYCARPENTRY AND JOINERY
75 x 22mm Skirting nailed.
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 3 m 600 0.00 0.00 0.00
2 45 4 m 1446 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 1 m² 3421 0.00 0.00 0.00
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought ' supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
METAL NAILED UP AND SCREW UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm IBR profile metal ceiling in single lengths fixed to steel purlins/branderings or rails:
CEILINGS PARTITIONS AND ACCESS FLOORING
Ceilings including 30 x 30 x 3mm angle iron brandering at 1250mm centres running both ways.
2 46 2 No. 35 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 3 m 1233 0.00 0.00 0.00
2 46 4 m 1446 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 3mm angle section framing covered with 0.5mm thick IBR profile sheeting fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
Narrow and broad flute closure to suite the IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
HINGES, FLOOR SPRING HINGES, BOLTS, PANIC BOLTS, ETC
IRONMONGERY
Flush barrel bolts in Solid or similar approved:
2 47 1 No. 46 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 2 No. 115 0.00 0.00 0.00
2 47 3 No. 45 0.00 0.00 0.00
2 47 4 No. 75 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 5 No. 123 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 6 No. 35 0.00 0.00 0.00
2 47 7 No. 19 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 8 No. 9 0.00 0.00 0.00
IRONMONGERY
500 x 32mm Satin chrome on brass flush barrel bolt with keep let into concrete.
IRONMONGERY
CATCHES, CABIN HOOKS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved standard window handle.
IRONMONGERY
Approved standard window catch.
IRONMONGERY
Approved standard window stay.
IRONMONGERY
LOCKS, Handles etc
IRONMONGERY
Solid or similar approved:
IRONMONGERY
'Blesbok' Art 460/312 four lever lockset complete with a pair of handles.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
Anodised aluminium plate with male or female symbol.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Chairman Industries or simmilar approved:
IRONMONGERY
DL2 Stainless steel side grab rail.
2 48 9 No. 9 0.00 0.00 0.00
2 48 Approved: 0.00 0.00 0.00
2 48 10 No. 18 0.00 0.00 0.00
2 48 SUNDRIES 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 11 No. 123 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
IRONMONGERY
SR2 Stainless steel backgrab rail.
IRONMONGERY
IRONMONGERY
Chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Dclsa or similar approved:
IRONMONGERY
Code 140/83 satin chrome plated floor mounted door stop.
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
The following in purpose made screens, frames, and gates, etc:
2 50 1 No. 15 0.00 0.00 0.00
2 50 2 No. 49 0.00 0.00 0.00
2 50 3 No. 199 0.00 0.00 0.00
2 50 4 m 38 0.00 0.00 0.00
2 50 5 Kg 64 0.00 0.00 0.00
2 51 0.00 0.00 0.00
METALWORK
Purpose made single security gate 813 x 2,032mm high overall, formed of 38 x 76 x 2.5mm mild steel square hollow section perimeter framing and two centre transoms forming top and bottom openings, each filled in with 'Mentix Flattex Code No. 341' expanded
METALWORK
Extra on 40 x 76 x 3mm hollow section framing for mitred angle intersection.
METALWORK
10mm Diameter loose bolt type expanding bolt as 'Rawbolt M10 75L', including mortice in brickwork and bolt up tight.
METALWORK
Purpose made gate frame consisting of 40 x 76 x 3mm square hollow section bolted to brickwork with bolts (bolts elsewhere measured).
METALWORK
10mm M10 Bolts.
METALWORK
Screens and gates:
2 51 6 No. 10 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 7 No. 102 0.00 0.00 0.00
2 51 8 No. 32 0.00 0.00 0.00
2 51 0.00 0.00 0.00
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard ' Wispeco' or similar approved chawl doors with back panel:
METALWORK
Door 813 x 2,032mm high complete with back panel, hang to existing door frame.
METALWORK
Door 813 x 2,032mm high complete with back panel with double rebated frame suitable for one brick wall.
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
2 51 9 No. 28 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 SCREEDS 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 1 m² 2822 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 2 m 15 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 0.00 0.00 0.00
METALWORK
Frame for door 813 x 2,032mm high.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.(internal and external)
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
2 53 3 m² 15 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 1 m 750 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
PLASTERING
On narrow widths.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.NOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.CERAMIC WALL TILING
Allow a PC sum of N$ 200.00 per m2 for purchasing and delivery of wall tiles fixed with adhesive to and including 20mm plaster bedding on walls and flush pointed with tinted waterproof jointing compound:
2 TILING 54 2 m² 59 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 3 m² 473 0.00 0.00 0.00
2 TILING 54 4 m 39 0.00 0.00 0.00
2 TILING 54 5 m 750 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
On walls in isolated panels, splashbacks, etc.CERAMIC FLOOR TILING
Allow a PC sum of N$260.00 per m2 for the purchase and delivery of 300 x 300 x 6mm full-body ceramic floor tiles fixed with adhesive on 25mm screed bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors and landings.Circular cutting.Skirting 100mm high cut on tile
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
SUPPLEMENTARY PREAMBLES
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
PLUMBING AND DRAINAGE
uPVC pressure pipes and fittings:
PLUMBING AND DRAINAGE
Pipes for water supply shall be of the class stated.
PLUMBING AND DRAINAGE
Pipes of 40mm diameter and smaller shall be plain ended with solvent welded uPVC loose sockets and fittings.
PLUMBING AND DRAINAGE
Pipes of 50mm diameter and greater shall have sockets and spigots with push-in type integral rubber ring joints. Bends shall be uPVC and all other fittings shall be cast iron, all with similar push-in type joints.
PLUMBING AND DRAINAGE
Copper pipes:
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Pipes shall be hard drawn and half-hard pipes of the class stated. Class 0 (thin walled hard drawn) pipes shall not be bent. Class 1 (thin walled half-hard), class 2 (half-hard) and class 3 (heavy walled half-hard) pipes shall only be bent with benders wi
PLUMBING AND DRAINAGE
Fixing of pipes:
PLUMBING AND DRAINAGE
Unless specifically otherwise stated, descriptions of pipes shall be deemed to include for fixing to walls etc. casting in, building in or suspending not exceeding 1m below suspension level
PLUMBING AND DRAINAGE
Reducing fittings:
2 55 0.00 0.00 0.00
2 55 Flush pans: 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Where fittings have reducing ends or branches they are described as 'reducing'. In the case of pipes with diameters not exceeding 60mm only the largest end or branch size is given. Should the Contractor wish to use other fittings and bushes or reducers he
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Flush pans shall have straight or side outlets and 'P' or 'S' traps as necessary.
PLUMBING AND DRAINAGE
Exposed concrete surfaces:
PLUMBING AND DRAINAGE
Where no manufacturers' instructions exist pipes shall be laid in accordance with clauses 5.1 and 5.2 of each of the following: SABS 1200 L : Medium pressure pipelines LD : Sewers LE : Stormwater drainage Pipe trenches etc shall be backfilled in accord
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Exposed surfaces of concrete stormwater channels, cover slabs, inspection eye marker slabs, gulley tops, cleaning eye tops, catchpits, inspection chambers, etc shall be finished smooth with plaster.
PLUMBING AND DRAINAGE
Excavations:
PLUMBING AND DRAINAGE
No claim for rock excavation will be entertained unless the Contractor has timeously notified the quantity surveyor thereof prior to backfilling.
PLUMBING AND DRAINAGE
Laying, backfilling, bedding, etc of pipes:
PLUMBING AND DRAINAGE
Pipes shall be laid and bedded and trenches shall be carefully backfilled in accordance with manufacturers' instructions.
PLUMBING AND DRAINAGE
Stainless steel basins, sinks, wash troughs, urinals, etc:
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 1 No. 20 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Units shall have standard aprons on all exposed edges and tiling keys against walls where applicable.
PLUMBING AND DRAINAGE
Waste unions:
PLUMBING AND DRAINAGE
Descriptions of waste unions shall be deemed to include rubber or vulcanite plugs and chains fixed to fittings.
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover and 6l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china wash hand basins and pedestals:
2 56 2 No. 18 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 3 No. 9 0.00 0.00 0.00
2 57 Approved: 0.00 0.00 0.00
2 57 4 No. 5 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
PLUMBING AND DRAINAGE
510 x 405mm 'Hibiscus' white vitreous china lavatory basin (product code 7050) with two tapholes including integrated overflow and chainstay hole.
PLUMBING AND DRAINAGE
'Franke (t/a Citimetal)' grade 304 (18/10) 1,2mm thick stainless steel wash hand basins:
PLUMBING AND DRAINAGE
'Franke Oval A' wash hand basin size 420 x 340mm with pressed bowl , two tapholes , 100mm radius apron and 50mm high splashback, four times bolted to wall with M8 expansion bolts.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Polyethylene rotation pedestal and funnel V.I.D.P latrine with heavy duty seat and cover.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved waste unions etc:
2 57 5 No. 12 0.00 0.00 0.00
2 57 TRAPS ETC 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 6 No. 33 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 7 No. 13 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 8 m 318 0.00 0.00 0.00
2 57 9 m 203 0.00 0.00 0.00
2 58 10 m 162 0.00 0.00 0.00
PLUMBING AND DRAINAGE
75mm diameter Chrome plated shower/fountain grating (code 323).
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved traps etc:
PLUMBING AND DRAINAGE
40mm Rough brass medium seal sink 'P' trap, with FI outlet and cleaning eye (code VA2.360).
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' crutch handle, elbow action and lockshield bibtaps:
PLUMBING AND DRAINAGE
15mm Star Chrome plated foot operated hose bibtap with 20mm BSP thread on outlet (code 507-21).
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class 10 HDPE pipes:
PLUMBING AND DRAINAGE
25 Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
63mm Pipes laid in and including trenches.
2 58 0.00 0.00 0.00
2 58 11 No. 33 0.00 0.00 0.00
2 58 12 No. 14 0.00 0.00 0.00
2 58 13 No. 13 0.00 0.00 0.00
2 58 14 32mm Tee. No. 15 0.00 0.00 0.00
2 58 15 No. 10 0.00 0.00 0.00
2 58 16 No. 8 0.00 0.00 0.00
2 58 17 No. 8 0.00 0.00 0.00
2 58 18 No. 9 0.00 0.00 0.00
2 58 19 No. 7 0.00 0.00 0.00
2 58 20 No. 9 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 21 m 71 0.00 0.00 0.00
2 59 22 m 42 0.00 0.00 0.00
2 59 23 m 50 0.00 0.00 0.00
2 59 0.00 0.00 0.00
2 59 24 No. 10 0.00 0.00 0.00
2 59 25 No. 10 0.00 0.00 0.00
2 59 Sundries: 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra over HDPE pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
25mm Fittings.
PLUMBING AND DRAINAGE
32mm Reducer.
PLUMBING AND DRAINAGE
32mm Bend.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
32mm Adaptor coupling.
PLUMBING AND DRAINAGE
63mm Bend.
PLUMBING AND DRAINAGE
32 x 32 x 25mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 32 x 25mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 63 x 32mm Reducing tee.
PLUMBING AND DRAINAGE
63mm Adaptor coupling.
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
22mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
2 59 26 No. 14 0.00 0.00 0.00
2 59 27 No. 8 0.00 0.00 0.00
2 59 28 Item 3 0.00 0.00 0.00
2 59 TESTING 0.00 0.00 0.00
2 59 Testing: 0.00 0.00 0.00
2 59 29 Item 3 0.00 0.00 0.00
2 59 30 Item 3 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra for connecting 22mm Coper pipe to 25mm HDPE pipe including all neccessary fittings, etc.
PLUMBING AND DRAINAGE
225 x 225mm Cast iron stopcock box including brick chamber below not exceeding 500mm deep internally.
PLUMBING AND DRAINAGE
excavate and connect the new 32mm HDPE water supply pipe to existing municipal water line including all labour and materials to execute the connection.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
Testing drainage pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
'Chubb'or similar approved:
2 60 31 No. 45 0.00 0.00 0.00
2 60 32 No. 46 0.00 0.00 0.00
2 60 33 No. 20 0.00 0.00 0.00
2 60 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Everyway' hose reel complete with 30m non-kinkable hose 20mm internal diameter plated stopcock, shut-off nozzle and wall bracket complete with 25mm diameter Saunders type A diaphragm isolated valve.
PLUMBING AND DRAINAGE
9kg Rechargeable dry chemical fire extinguisher complete with initial charge painted backing board plugged and screwed to plastered or tiled brick wall.
PLUMBING AND DRAINAGE
80 x 65mm Brass hydrant booster connection with cap and chain.
PLUMBING AND DRAINAGE
Fire hydrant pedestals:
2 60 34 No. 1 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 35 m 360 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 36 No. 18 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 37 m 144 0.00 0.00 0.00
2 60 38 m 96 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Unreinforced concrete hydrant pedestals 900mm high cast around vertical pipe with bottom 300mm below ground, 300 x 300mm square at base and tapering to octagonal shaped top 200 x 200mm overall including necessary excavation, formwork and two coats of pain
PLUMBING AND DRAINAGE
WATER SUPPLIES TO FIRE APPLIANCES
PLUMBING AND DRAINAGE
Class 10 HDPE Type 4 pressure pipes:
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class 10 HDPE Type 4 pressure pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
32mm Fittings.
PLUMBING AND DRAINAGE
Galvanised steel pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches not exceeding 1m.
PLUMBING AND DRAINAGE
32mm Pipes.
2 61 0.00 0.00 0.00
2 61 39 No. 48 0.00 0.00 0.00
2 61 40 No. 30 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 41 m 195 0.00 0.00 0.00
2 61 42 m 110 0.00 0.00 0.00
2 61 SLEEVES 0.00 0.00 0.00
2 61 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra over galvanised steel pipes for steel Fittings:
PLUMBING AND DRAINAGE
25mm Fittings.
PLUMBING AND DRAINAGE
32mm Fittings.
PLUMBING AND DRAINAGE
STORM WATER, SOIL WATER, AND WATER SYSTEMS REPAIRS
PLUMBING AND DRAINAGE
Clean, unblock, seal leakages and where applicable repair or replace part of or entire system or sub-systems to restore service:
PLUMBING AND DRAINAGE
Soilwater system, including inspection chambers, rodding eyes, vents, etc.
PLUMBING AND DRAINAGE
Water reticulation system, including fire protection sub-system, valves, connections, pipe replacement, etc
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Plastic sleeves for pipes not exceeding 100mm diameter:
2 61 43 No. 53 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 44 No. 55 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
PLUMBING AND DRAINAGE
Plastic sleeves for pipes exceeding 100mm and not exceeding 200mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ELECTRICAL WORK
DISTRIBUTION BOARDS
2 63 0.00 0.00 0.00
2 63 1 No. 6 0.00 0.00 0.00
2 63 2 No. 4 0.00 0.00 0.00
2 63 3 No. 4 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 4 m 35 0.00 0.00 0.00
2 63 0.00 0.00 0.00
ELECTRICAL WORK
Distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for four future circuit breakers, legend card, circuit breakers, fuses, relay, volt-meter, ammeter, transformer, earth leakage unit, time switch, etc.
ELECTRICAL WORK
10A single pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
20A Double pole main switch isolater.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
2 63 0.00 0.00 0.00
2 63 5 m 30 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 6 No. 44 0.00 0.00 0.00
2 64 7 No. 37 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 8 No. 30 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 9 2.5mm2. m 33 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 10 2.5mm². m 80 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enamelled fixed onto conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Metal type fixed onto PVC conduit:
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
2 64 11 No. 9 0.00 0.00 0.00
2 64 12 No. 6 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 13 m 38 0.00 0.00 0.00
2 65 14 No. 4 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 15 No. 3 0.00 0.00 0.00
2 65 16 Item 1 0.00 0.00 0.00
2 65 17 No. 23 0.00 0.00 0.00
2 65 18 No. 20 0.00 0.00 0.00
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Conductors etc:
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations conductors, etc.:
ELECTRICAL WORK
70mm² Bare stranded copper conductor drawn into conduiting including conduiting..
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
ELECTRICAL WORK
ELECTRICAL RETICULATION
ELECTRICAL WORK
Install bird cage and siren.
ELECTRICAL WORK
Decommission Electricity and make safe.
ELECTRICAL WORK
Replace 1G1/2W switches.
ELECTRICAL WORK
Replace SSO.
2 65 19 Item 0 0.00 0.00 0.00
2 65 20 Item 0 0.00 0.00 0.00
2 65 21 m³ 58 0.00 0.00 0.00
2 65 22 Item 1 0.00 0.00 0.00
2 65 23 Item 1 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 24 No. 11 0.00 0.00 0.00
ELECTRICAL WORK
Check and repair faulty power circuit, including control gear and insulation,phase rotation,wiring
ELECTRICAL WORK
Rewire fitting or circuit to distribution board, excluding existing wiring or control gear
ELECTRICAL WORK
Excavation in hard rock conditions for cable trench (for new or existing cables,to 600mm deep)
ELECTRICAL WORK
Terminate / make safe / remove existing cabling or wires not in use
ELECTRICAL WORK
Conceal / make good existing cabling or wires on surface by grouping multiple wires and tying down, conceal using metal trunking or conduits
ELECTRICAL WORK
Distribution Board:
ELECTRICAL WORK
Remove and replace door with latch,tray and blank plates complete with 25mm pad lock.
2 66 25 Item 2 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 26 No. 10 0.00 0.00 0.00
2 66 27 No. 84 0.00 0.00 0.00
2 66 28 No. 75 0.00 0.00 0.00
2 66 29 No. 54 0.00 0.00 0.00
2 66 30 No. 53 0.00 0.00 0.00
2 66 31 No. 33 0.00 0.00 0.00
ELECTRICAL WORK
Clean kiosk(s) complete, remove cobwebs and dust, check mechanical connections, latch mechanisms, gaskets, replace if needed
ELECTRICAL WORK
Take delivery and install luminaries or equipment supplied by others complete with lamps, connections, etc:
ELECTRICAL WORK
Flood light, mast / wall mounted, with HID Lamp-make good replace lamp
ELECTRICAL WORK
Replace 58W flourescent tubes
ELECTRICAL WORK
Replace 36W flourescent tubes
ELECTRICAL WORK
Make good 36/58/100W fluorescent light fitting, including re-fitting, replace starter and / or transformer
ELECTRICAL WORK
Replace 100W flourescent tubes
ELECTRICAL WORK
Replace external CFL's on external lights
2 66 32 No. 16 0.00 0.00 0.00
2 66 33 No. 11 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 1 m² 72 0.00 0.00 0.00
ELECTRICAL WORK
Replace damaged 1500/1800mm with standard type C with 2 x 1200mm fittings complete with tubes
ELECTRICAL WORK
Replace wall mounted light itting as 'lascon' B20 or similar approved and bulb 2PL9 bulbs (B)
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.GLAZING TO STEEL WITH PUTTY4mm Clear float glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
SUPPLEMENTARY PREAMBLES
PAINTWORK
All work to be executed in strict accordance with the specifications of Plascon Paints (Pty) Ltd. The coating systems are as per Plascon's 'List of Decorative Paint Products' unless otherwise specified. Full specifications are available on request from Pl
PAINTWORK
Primers and first coats may be thinned in accordance with the paint specifications of Plascon Paints (Pty) Ltd to aid the absorption of the paint.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
All surfaces must be sound, clean and have a moisture content of less than 8% for walls generally and 3% for slabs/screeds etc.
PAINTWORK
Where surfaces of plaster etc are sandy / friable, the first coat must be replaced with 'Plascon Merit' plaster primer thinned 10% with turpentine.
PAINTWORK
All paints are to bear the SABS mark and are to be applied in strict accordance with manufacturer's instructions.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
Prices for paintwork are to include for masking and protecting of all finished paintwork and all finished joinery, tiling, floor coverings, etc. during painting. Any damage to such finished work shall be removed, repaired or replaced at the Contractor's e
PAINTWORK
Prices for painting are to include for painting a one square metre sample panel of all finishing coats and for repeating if required. Only after written approval from Architect may finishing coats be applied.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 0.00 0.00 0.00
PAINTWORK
Prices for all paintwork are to include all colours which have a value of 8 or higher on the Munsell system in accordance with the relevant SABS specification.
PAINTWORK
The Contractor shall provide all necessary dust sheets, covers, etc. required during painting. All door handles, locks and other ironmongery, pelmets, electrical switch and socket covers, etc. are to be removed before commencing the painting. All paint sp
PAINTWORK
PAINTWORK, ETC TO PREVIOUSLY PAINTED WORK
PAINTWORK
ON SMOOTH PLASTER
2 70 0.00 0.00 0.00
2 70 1 m² 6376 0.00 0.00 0.00
2 70 2 m² 1020 0.00 0.00 0.00
2 70 3 m 2361 0.00 0.00 0.00
2 70 4 m² 337 0.00 0.00 0.00
2 70 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Interior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On interior walls.
PAINTWORK
On narrow widths, (internal & external)
PAINTWORK
On interior walls in bands not exceeding 300mm girth.
PAINTWORK
On interior walls in patterned multi-colours.
PAINTWORK
ON TEXTURED PLASTER
2 70 0.00 0.00 0.00
2 70 5 m² 4503 0.00 0.00 0.00
2 70 6 m 386 0.00 0.00 0.00
2 71 ON METAL 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On exterior walls.
PAINTWORK
On exterior mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
2 71 0.00 0.00 0.00
2 71 7 m² 203 0.00 0.00 0.00
2 71 8 m² 4420 0.00 0.00 0.00
2 71 9 m² 174 0.00 0.00 0.00
2 71 10 m² 336 0.00 0.00 0.00
2 71 11 m² 334 0.00 0.00 0.00
2 71 12 m² 76 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse, spot priming with 'Plascon Namelcote Synthetic Metal Primer' and apply one coat 'Plascon Merit Universal Undercoat'
PAINTWORK
On door frames.
PAINTWORK
On IBR metal ceilings (measured flat).
PAINTWORK
On metal members supporting walkway cover and overhangs.
PAINTWORK
On exterior steel roof members at eaves and verges.
PAINTWORK
On windows, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On windows with burglar bars (both sides measured).
2 71 13 m² 81 0.00 0.00 0.00
2 71 0.00 0.00 0.00
2 71 0.00 0.00 0.00
2 71 14 m² 141 0.00 0.00 0.00
2 71 15 m² 336 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 ON METAL 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 16 m² 789 0.00 0.00 0.00
PAINTWORK
On mesh window covers (both sides measured).
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts,rinse,apply one coat 'Plascon Oil Wood Primer' one coat 'Plascon Merit Universal Undercoat' and two coats 'Plascon Super En
PAINTWORK
On interior fittings
PAINTWORK
On exterior roof timbers at eaves and verges.
PAINTWORK
PAINTWORK ETC TO NEW WORK
PAINTWORK
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
PAINTWORK
On corner protectors.
2 72 17 m² 420 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 18 m² 3421 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
PAINTWORK
On doors,gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
PAINTWORK
On IBR metal ceilings.(measured flat)
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer' or similar approved, one coat 'Plascon Merit Universal Undercoat' or similar approved and two coats 'Plascon Velvaglo Polyurethane Enamel' or similar approved pai
2 72 19 m 326 0.00 0.00 0.00
2 72 20 m 2478 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 1 m² 1080 0.00 0.00 0.00
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
PAINTWORK
On interior skirtings, rails, etc not exceeding 300 mm girth.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (1999 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 2 m 92 0.00 0.00 0.00
2 74 3 m 92 0.00 0.00 0.00
EXTERNAL WORKS
ROADWORK, PAVING, ETC
EXTERNAL WORKS
Precast concrete kerbs (30 Mpa) finished smooth on exposed surfaces including bedding, cutting, pointing and pointing and 20/19mm Mpa unreinforced concrete haunching at junctions:
EXTERNAL WORKS
Garden kerb 900 x 250 x 75mm high with twice chamfered edges with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
2 74 4 m 54 0.00 0.00 0.00
2 74 5 m 54 0.00 0.00 0.00
2 75 6 m 19 0.00 0.00 0.00
2 75 7 No. 7 0.00 0.00 0.00
2 75 0.00 0.00 0.00
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc, circular on plan exceeding 4m radius.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc., circular on plan not exceeding 4m radius.
EXTERNAL WORKS
1,200mm Diameter 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
Open face excavation over sloping site:
2 75 8 m³ 464 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 9 Soft rock m³ 22 0.00 0.00 0.00
2 75 10 Hard rock m³ 23 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 11 Brickwork. m³ 6 0.00 0.00 0.00
2 75 12 m³ 5 0.00 0.00 0.00
2 75 13 m³ 4 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 14 m³ 273 0.00 0.00 0.00
EXTERNAL WORKS
Open face excavation to form platform under parking areas etc and carting away surplus material from site to a dumping site to be located by the contractor.
EXTERNAL WORKS
Extra over bulk excavation in earth for excavation in:
EXTERNAL WORKSEXTERNAL WORKS
EXTERNAL WORKS
Extra over bulk excavation in earth for breaking up and removing:
EXTERNAL WORKSEXTERNAL WORKS
Unreinforced concrete.
EXTERNAL WORKS
Reinforced concrete.
EXTERNAL WORKS
Earth filling supplied by the contractor under pavings etc:
EXTERNAL WORKS
Over site of G5 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
2 76 15 m³ 184 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 16 m² 519 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 17 m² 519 0.00 0.00 0.00
EXTERNAL WORKS
Over site of G6 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Compaction of surfaces:
EXTERNAL WORKS
Compaction of ground surface under pavings etc. including scarifying for a depth of 150mm, breaking down oversize material, adding suitable material where necessary and compacting to 95 % Mod AASHTO density (materials to comply with CBR >25%)
EXTERNAL WORKS
Anti-termite soil poison and weedkiller:
EXTERNAL WORKS
Approved brands of weedkiller and termite poisoning mixed and applied in accordance with the manufacturer's instructions under pavings, etc.
2 76 0.00 0.00 0.00
2 76 18 m² 519 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 19 m³ 24 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 20 m² 68 0.00 0.00 0.00
EXTERNAL WORKS
Thick 35Mpa standard grey double zig zag interlocking roadstone paving on and including open joints on 25mm thick river sand bed with sand and cement mixture swept into joints, hose down including bedding, jointing and pointing:
EXTERNAL WORKS
Paving in herring borne pattern bond with butt joints to falls.
EXTERNAL WORKS
25Mpa/19mm Reinforced Concrete:
EXTERNAL WORKS
Toes and walls of walkways
EXTERNAL WORKS
Garden soil to planter:
EXTERNAL WORKS
Remove all building rubble and materials to 500mm depth and fill in with garden soil for grassing, planting, etc (Plant, grass, cost elsewhere measured).
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
EARTHWORKS
NATURE OF GROUND
EARTHWORKS
The nature of the ground is assumed to be loose sandy material, therefore "earth", but possibly interspersed with "hard rock" or "soft rock".
EARTHWORKS
SITE CLEARANCE, ETC.
EARTHWORKS
Site clearance, etc.:
3 80 1 m² 1932 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 2 Trenches. m³ 293 0.00 0.00 0.00
3 80 3 m³ 12 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 4 Soft rock. m³ 19 0.00 0.00 0.00
3 80 5 Hard rock. m³ 13 0.00 0.00 0.00
3 81 0.00 0.00 0.00
EARTHWORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKSEARTHWORKS
Compaction:
3 81 6 m² 293 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 7 m² 880 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 8 m³ 95 0.00 0.00 0.00
3 81 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of excavated surfaces to receive concrete footings, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically Vibrated:
EARTHWORKS
In trenches, holes etc under strip foundations.
EARTHWORKS
CARTING AWAY.
3 81 0.00 0.00 0.00
3 81 9 m³ 101 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 10 m³ 128 0.00 0.00 0.00
3 81 11 m³ 65 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 12 m³ 68 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Backfilling to trenches, holes, etc.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
3 82 0.00 0.00 0.00
3 82 13 m³ 39 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 14 m² 431 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 15 Item 5 0.00 0.00 0.00
3 82 0.00 0.00 0.00
EARTHWORKS
Coarse river sand filling compacted to 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, etc.
EARTHWORKS
Surface Preparation:
EARTHWORKS
Trim and level off surface of natural ground surfaces to receive concrete paving, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
KEEPING EXCAVATIONS FREE OF WATER
EARTHWORKS
Keeping excavations free of water:
EARTHWORKS
Allow for keeping excavations free of water by hand or machinery.
EARTHWORKS
SOIL POISONING
3 82 0.00 0.00 0.00
3 82 16 m² 293 0.00 0.00 0.00
3 82 17 m² 746 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
EARTHWORKS
Approved brands of weedkiller mixed with termite poison and applied in accordance with the manufacturer's instructions:
EARTHWORKS
To bottoms of trenches, etc.
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 1 Sets 44 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 2 m³ 71 0.00 0.00 0.00
3 84 3 m³ 55 0.00 0.00 0.00
3 84 4 Slabs. m3 2.79 0.00 0.00 0.00
3 84 5 m3 2.89 0.00 0.00 0.00
3 84 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds cast in panels on waterproofing.
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE CAST AGAINST EXCAVATED SURFACES
3 84 0.00 0.00 0.00
3 84 6 m³ 67 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 7 m3 1.8 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 8 m² 366 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 9 m² 742 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Strip footings.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a power float:
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls and currents.
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a steel trowel:
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds, slabs, etc.
3 85 10 m² 431 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 11 m² 28 0.00 0.00 0.00
3 85 12 m 559 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 13 m² 21 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 14 No. 15 0.00 0.00 0.00
3 86 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Soffits:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough formwork to form:
CONCRETE, FORMWORK AND REINFORCEMENT
Opening exceeding 1m and not exceeding 2m girth through not exceeding 300mm slab.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT
3 86 0.00 0.00 0.00
3 86 15 m² 21 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 1 m² 135 0.00 0.00 0.00
3 MASONRY 88 2 m² 355 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
BRICKWORK IN FOUNDATIONS (PROVISIONAL)
Brickwork of concrete bricks [14Mpa] in Class I mortar:Half brick walls.One brick walls.BRICKWORK IN SUPERSTRUCTURE
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 3 m² 340 0.00 0.00 0.00
3 MASONRY 88 4 m² 52 0.00 0.00 0.00
3 MASONRY 88 5 m² 855 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 6 m 116 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 7 m² 748 0.00 0.00 0.00
3 MASONRY 89 8 m² 16 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 9 m² 764 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 10 m² 3 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
Brickwork of concrete bricks [7Mpa] in Class I mortar:Half brick walls.Half brick walls in beamfilling.One brick walls.BRICKWORK SUNDRIESBrickwork sundries:Brick-on-edge cill set sloping and projecting.Fair face to brickwork in horizontal stretcher bond pointed with recessed horizontal and flush vertical joints:Extra for fair face.Half brick walls pointed on both sides.Cement wash of 1:3 liquid cement and sand mixture applied with a brush:On brick surfaces.Joint forming material in movement joints:10mm Bitumen impregnated fibre board built in vertically through brick walls.Brickwork reinforcement:
3 MASONRY 89 11 m 1650 0.00 0.00 0.00
3 MASONRY 89 12 m 958 0.00 0.00 0.00
3 MASONRY 89 13 m 4396 0.00 0.00 0.00
3 MASONRY 89 14 m 2691 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 15 m 311 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 16 No. 48 0.00 0.00 0.00
3 MASONRY 90 0.00 0.00 0.00
3 MASONRY 90 0.00 0.00 0.00
3 MASONRY 90 17 m 44 0.00 0.00 0.00
75mm Wide reinforcement built in horizontally in foundations.75mm Wide reinforcement built in horizontally in superstructure.
150mm Wide reinforcement built in horizontally in foundations.
150mm Wide reinforcement built in horizontally in superstructure.Approved prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.Air bricks etc:230 x 160mm Galvanised air brick.NUTEC-CEMENT WINDOW SILLSNatural grey sills in single lengths bedded in class I mortar including metal fixing lugs etc:
15 x 150mm Wide sills set flat and slightly projecting.
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 1 In walls. m² 45 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 2 m² 865 0.00 0.00 0.00
WATERPROOFING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
WATERPROOFING
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
WATERPROOFING
DAMPPROOFING OF WALLS AND FLOORS
WATERPROOFING
One layer of 375 micron Consol Plastics Brikgrip DPC embossed damp proof course:
WATERPROOFING
WATERPROOFING
One layer of 250 micron Consol Plastics Gunplas Black waterproof sheeting sealed at laps with Gunplas Pressure Sensitive Tape:
WATERPROOFING
Under surface beds.
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 3 m 3 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 4 m 15 0.00 0.00 0.00
3 93 0.00 0.00 0.00
3 93 5 m 23 0.00 0.00 0.00
WATERPROOFING
WATERPROOFING TO ROOFS, BASEMENTS, ETC.
WATERPROOFING
Bondglass flexible reinforced waterproofing:
WATERPROOFING
Flashing strip 150mm girth at turn-ups including sealing top edge into groove with mastic.
WATERPROOFING
JOINT SEALANTS ETC
WATERPROOFING
'Expandite' or other approved two-part grey polysulphide sealing compound including backing cord, bond breaker, primer, etc:
WATERPROOFING
10 x 15mm In vertical expansion joints.
WATERPROOFING
'Sikaflex' PRO-3 WF multi-use, one component, polyurethane sealant in colour Concrete Grey applied in accordance with the manufacturer's instructions:
WATERPROOFING
10 x 15mm elastic joint on floor tiling.
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 1 m² 1272 0.00 0.00 0.00
ROOF COVERINGS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ROOF COVERINGS
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
ROOF COVERINGS
TROUGHED METAL SHEETING AND ACCESSORIES
ROOF COVERINGS
0.5mm Thick industrial Z275 IBR profiled or similar approved sheet steel in single lengths fixed to steel purlins or rails and sheet steel accessories:
ROOF COVERINGS
Roof covering with pitch not exceeding 25 degrees, in transportable lengths not exceeding 20m.
3 95 Flashings: 0.00 0.00 0.00
3 95 2 m 113 0.00 0.00 0.00
3 95 3 m 217 0.00 0.00 0.00
3 95 4 m 289 0.00 0.00 0.00
3 95 5 No. 14 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 6 m² 967 0.00 0.00 0.00
3 98 0.00 0.00 0.00
ROOF COVERINGS
ROOF COVERINGS
Ridge capping 550mm girth, three times bent along girth and notched on site to suit roof profile.
ROOF COVERINGS
Serrated eaves closers.
ROOF COVERINGS
Narrow and broad flute closers.
ROOF COVERINGS
Ridge cape and closures to suit IBR profile
ROOF COVERINGS
ROOF AND WALL INSULATION
ROOF COVERINGS
Sisalation 400 housing grade glass fibre reinforced aluminium foil bonded insulation:
ROOF COVERINGS
Insulation laid taut over purlins on galvanised straining wires (at approximately 300mm centres).
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 1 No. 8 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 2 No. 3 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 3 m 189 0.00 0.00 0.00
3 98 4 m 594 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
CARPENTRY AND JOINERY
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
CARPENTRY AND JOINERY
FLUSH DOORS
CARPENTRY AND JOINERY
Solid core flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
Semi-solid flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought 'Supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CARPENTRY AND JOINERY
NOTICE BOARDS, PINNING BOARDS, KEYBOARDS, DUCKBOARDS, ETC
CARPENTRY AND JOINERY
Vitrex or similar approved:
3 98 5 No. 18 0.00 0.00 0.00
3 99 6 No. 22 0.00 0.00 0.00
3 99 Softboard: 0.00 0.00 0.00
3 99 7 m² 51 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 8 m 9 0.00 0.00 0.00
3 99 9 m 9 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 10 m² 6 0.00 0.00 0.00
3 99 0.00 0.00 0.00
CARPENTRY AND JOINERY
Pinboards model 2300 code: '2315', size 1,000 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F3).
CARPENTRY AND JOINERY
Pinboard model 2300 code: '2309', size 2,400 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F1).
CARPENTRY AND JOINERYCARPENTRY AND JOINERY
13mm Pinning boards.
CARPENTRY AND JOINERY
THE FOLLOWING IN RECEPTION COUNTER
CARPENTRY AND JOINERY
Sawn softwood:
CARPENTRY AND JOINERY
28 x 32mm Filler piece.
CARPENTRY AND JOINERY
28 x 114mm Filler piece.
CARPENTRY AND JOINERY
Wrought 'Supa Wood':
CARPENTRY AND JOINERY
32mm Tops, etc.
CARPENTRY AND JOINERY
Wrought hardwood:
3 99 11 m 21 0.00 0.00 0.00
3 99 12 m 6 0.00 0.00 0.00
3 99 13 m 21 0.00 0.00 0.00
3 99 14 m 30 0.00 0.00 0.00
3 99 15 m 9 0.00 0.00 0.00
3 100 Melawood: 0.00 0.00 0.00
3 100 16 No. 15 0.00 0.00 0.00
3 100 17 No. 6 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 18 m² 6 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
CARPENTRY AND JOINERY
44 x 60mm Rebated edge with rounded edges.
CARPENTRY AND JOINERY
44 x 70mm Twice rounded foot rest
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
22 x 70mm Framed framing bearer.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
Issue tray 104 x 493 x 166mm deep of 12 x 166mm sides, front and back and 4mm tempered hardboard bottom and four 3mm hardboard spacers 110mm x 166mm equally spaced let into sides .
CARPENTRY AND JOINERY
Drawer 535 x 493 x 166mm deep of 18 x 166mm grooved front, 12 x 166mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Formica decorative laminate:
CARPENTRY AND JOINERY
1.2mm Thick to tops, etc.
CARPENTRY AND JOINERY
PELMITS, ETC.
CARPENTRY AND JOINERY
Wrought 'Supa wood':
3 100 19 No. 21 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 0.00 0.00 0.00
3 100 20 m 21 0.00 0.00 0.00
3 100 21 m 21 0.00 0.00 0.00
3 100 22 m 9 0.00 0.00 0.00
3 100 23 m 42 0.00 0.00 0.00
3 100 Melawood: 0.00 0.00 0.00
3 100 24 m² 24 0.00 0.00 0.00
CARPENTRY AND JOINERY
Pelmit formed with 18mm Thick 'Supa wood' 138mm wide x 140mm high and 2000mm long (external dimensions) including single curtain track with 10 rollers per metre, brackets, closed ends, etc. plugged.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM CUPBOARDS
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18 x 30mm Bearers nailed.
CARPENTRY AND JOINERY
18 x 70mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
3 101 25 No. 3 0.00 0.00 0.00
3 101 26 No. 6 0.00 0.00 0.00
3 101 27 m 21 0.00 0.00 0.00
3 101 28 m 21 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 29 m² 18 0.00 0.00 0.00
3 101 30 m 6 0.00 0.00 0.00
3 101 31 m 66 0.00 0.00 0.00
3 101 Melawood: 0.00 0.00 0.00
CARPENTRY AND JOINERY
Drawer 453 x 500 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Drawer 453 x 750 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
1.2mm Thick edge strips 18mm wide.
CARPENTRY AND JOINERY
18 x 70mm Framed framing.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM WOODEN SHELVING
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18mm Thick to shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
18 x 75mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
3 101 32 m² 30 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
CEILINGS PARTITIONS AND ACCESS FLOORING
NAILED UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm Thick light industrial Z275 IBR profiled sheet steel in single lengths fixed to steel purlins or rails:
3 103 1 m² 518 0.00 0.00 0.00
3 103 2 No. 5 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 3 m 387 0.00 0.00 0.00
3 103 4 m 594 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
including 75 x 50 x 20 x 2.5mm lipped channel brandering at 1250mm centres, bolted to and including 50 x 50 x 5mm L-shaped cleat 50mm long.
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 2.5mm angle section framing covered with 'Alu zinc' IBR profiled sheeting and fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
Narrow and broad flute closure to suite the IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
3 104 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 1 No. 42 0.00 0.00 0.00
3 104 2 No. 6 0.00 0.00 0.00
3 104 LOCKS 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 3 No. 3 0.00 0.00 0.00
3 104 4 No. 6 0.00 0.00 0.00
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
IRONMONGERY
HINGES, BOLTS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Metal concealed hinges.
IRONMONGERY
50mm Chromium plated brass barrel bolt.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
50mm Padlock.
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset complete with pair of handles.
3 104 5 No. 3 0.00 0.00 0.00
3 104 6 No. 15 0.00 0.00 0.00
3 104 7 No. 15 0.00 0.00 0.00
3 105 HANDLES 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 8 No. 42 0.00 0.00 0.00
3 105 9 No. 15 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 10 No. 54 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 11 No. 18 0.00 0.00 0.00
3 105 SUNDRIES 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 12 No. 18 0.00 0.00 0.00
3 105 13 No. 4 0.00 0.00 0.00
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset with striking plate fixed to metal complete with a pair of handles.
IRONMONGERY
Art 52/146 cylinder cupboard lockset and escutcheon.
IRONMONGERY
Art 67/146 cylinder drawer lockset and escutcheon.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Art 123 pull handle.
IRONMONGERY
Art 102 knob.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
38mm Diameter rubber door stop floor mounted.
IRONMONGERY
38mm Diameter rubber door stop plugged to wall.
3 105 Approved: 0.00 0.00 0.00
3 105 14 No. 24 0.00 0.00 0.00
3 105 15 No. 48 0.00 0.00 0.00
3 105 16 No. 264 0.00 0.00 0.00
3 106 0.00 0.00 0.00
3 106 0.00 0.00 0.00
3 106 17 No. 7 0.00 0.00 0.00
3 106 18 No. 2 0.00 0.00 0.00
IRONMONGERY
IRONMONGERY
Raised type adjustable shelving strips 590mm long.
IRONMONGERY
Raised type adjustable shelving strips 1875mm long.
IRONMONGERY
Shelving studs.
IRONMONGERY
SHELVING UNITS
IRONMONGERY
Approved industrial steel shelving units with standard epoxy powder coated finish including uprights, open base foot pieces, shelf brackets, shelves, spacers, top rails, top finishing plates and adjustable book clips:
IRONMONGERY
Single shelving unit 1800 x 312 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 1800 x 450 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 450mm shelves.
3 106 19 No. 3 0.00 0.00 0.00
3 106 20 No. 3 0.00 0.00 0.00
3 106 21 No. 2 0.00 0.00 0.00
3 106 22 No. 2 0.00 0.00 0.00
3 106 23 No. 3 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 3600 x 312 x 1905mm high in 4 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 3600 x 312 x 1295mm high in 4 bays with uprights, each bay 900mm wide with 4 x 312mm shelves.
IRONMONGERY
Single shelving unit 4500 x 312 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 4500 x 450 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 3450mm shelves.
IRONMONGERY
Single shelving unit 5400 x 312 x 990mm high in 6 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
3 106 24 No. 3 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 25 No. 8 0.00 0.00 0.00
3 107 26 No. 3 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 7200 x 312 x 990mm high in 8 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or similar approved:
IRONMONGERY
Vitreous enameled chalkboard magnetic steel surface, non reflective to comply with SABS specification CKS-36-1980 supplied complete with aluminum chalk rail and mounted to wall with standard fixing brackets.
IRONMONGERY
System 1000 green writing board 2700 x 1140mm high with chalk rail plugged.
3 109 0.00 0.00 0.00
3 109 0.00 0.00 0.00
3 109 0.00 0.00 0.00
3 109 0.00 0.00 0.00
3 109 1 Kg 4676 0.00 0.00 0.00
3 109 0.00 0.00 0.00
STRUCTURAL STEELWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
STRUCTURAL STEELWORK
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
STRUCTURAL STEELWORK
STEEL TRUSSES ETC
STRUCTURAL STEELWORK
Welded roof trusses of angle section rails, struts, braces, cleats, etc and flat section bearer, gusset and connection plates bolted to steel:
STRUCTURAL STEELWORK
Sixteen double pitched trusses 10440 x 1024mm high extreme.
STRUCTURAL STEELWORK
Bolts to trusses etc:
3 109 2 Kg 8 0.00 0.00 0.00
3 109 3 No. 288 0.00 0.00 0.00
3 109 4 No. 72 0.00 0.00 0.00
3 109 0.00 0.00 0.00
3 109 0.00 0.00 0.00
3 109 5 Kg 4260 0.00 0.00 0.00
3 109 6 Kg 2836 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
STRUCTURAL STEELWORK
High tensile bolts.
STRUCTURAL STEELWORK
M8 x 100mm Expansion bolt.
STRUCTURAL STEELWORK
12mm Diameter U-shaped anchor bolt 800mm girth.
STRUCTURAL STEELWORK
PURLINS, GIRTS, BRACING, ETC
STRUCTURAL STEELWORK
Purlins and girts bolted to steel:
STRUCTURAL STEELWORK
Lipped channel section purlins.
STRUCTURAL STEELWORK
Lipped channel section brandering.
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
METALWORK
SUNDRY STEELWORK
3 110 0.00 0.00 0.00
3 110 1 Kg 48 0.00 0.00 0.00
3 110 2 No. 64 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 3 Kg 117 0.00 0.00 0.00
3 110 4 No. 24 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 5 No. 3 0.00 0.00 0.00
METALWORK
Welded bearers and framing to ceiling trapdoor:
METALWORK
30 x 30 x 2.5mm Angle section framing.
METALWORK
Extra over 30 x 30 x 2.5mm angle section for welded T-intersection.
METALWORK
Ceiling bearers:
METALWORK
50 x 50 x 5mm Angle section bearers.
METALWORK
Cut and pin end of 50 x 50 x 5mm angle section bearer 100mm deep into brickwork.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
Screens and gates:
METALWORK
Single gate 600 x 1165mm high formed of 40 x 40 x 5mm angle section frame, filled in with Ref. 4 expanded metal panel and two 40 x 40 x 5mm angle section posts 1165 long rawl bolted to brick work with and including 10mm diameter bolts at 500mm centres and
3 111 6 No. 6 0.00 0.00 0.00
3 111 7 No. 3 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 8 No. 11 0.00 0.00 0.00
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
Single burglar gate 813 x 2337mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 1167mm long 12 x 12
METALWORK
PRESSED STEEL DOOR FRAMES
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 813 x 2032mm high.
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 9 No. 11 0.00 0.00 0.00
3 111 10 No. 27 0.00 0.00 0.00
3 111 11 No. 24 0.00 0.00 0.00
3 111 12 No. 6 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 13 No. 11 0.00 0.00 0.00
METALWORK
STEEL WINDOWS, DOORS, ETC.
METALWORK
Standard residential windows with NBP2 burglar bars to all sections:
METALWORK
Window type NG2, 1022 x 359mm high (W3).
METALWORK
Window type E4H, 1511 x 654mm high (W2).
METALWORK
Window type C4H, 1511 x 949mm high (W4 & W7).
METALWORK
Window type D4H, 1511 x 1245mm high (W1).
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard 'Wispeco' chawl door with back panel:
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock complete with a pair of handles.
3 112 14 No. 3 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 1 On walls. m² 1422 0.00 0.00 0.00
3 114 2 m² 37 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 3 m² 25 0.00 0.00 0.00
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Blesbok 460/313 four lever mortice lock complete with a pair of handles.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
3 114 4 m 782 0.00 0.00 0.00
3 114 5 m 116 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 6 m 18 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
PLASTERING
On 200mm wide band.
PLASTERING
On sloping top, edge and projecting soffits of sills 505mm girth.
PLASTERING
CORNER PROTECTORS, DIVIDING STRIPS, ETC
PLASTERING
Corner protectors, dividing strips, etc:
PLASTERING
3 x 35mm Flat section steel weather bar.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet BlocksNOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:
3 TILING 115 1 m 1000 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
3 TILING 115 2 m² 9 0.00 0.00 0.00
3 TILING 115 0.00 0.00 0.00
'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.WALL TILING
Allow a PC sum of N$ 200.00 per m2 for purchasing and delivery of 200 x 200 ceramic wall tiles fixed with adhesive to and including 25mm plaster bedding on walls and flush pointed with tinted waterproof jointing compound:On walls in isolated panels, splashbacks, etc.CERAMIC FLOOR TILING
3 TILING 115 0.00 0.00 0.00
3 TILING 115 3 m² 21 0.00 0.00 0.00
3 TILING 115 4 m² 6 0.00 0.00 0.00
3 TILING 116 5 m 1000 0.00 0.00 0.00
3 TILING 116 6 No. 15 0.00 0.00 0.00 3 TILING 116 SUNDRIES 0.00 0.00 0.00 3 TILING 116 Sundries: 0.00 0.00 0.00
3 TILING 116 7 m 45 0.00 0.00 0.00
Allow a PC sum of N$ 260.00 per m2 for purchasing and delivery of 300 x 300mm full body ceramic floor tiles fixed with adhesive to and including 25mm screed bedding on concrete and flush pointed with tinted waterproof jointing compound:
On vanity slabs, cupboard slabs, cover slabs, etc.On narrow widths.100mm high cut tile skirting.cutting tiles around 435 x 335mm laboratory sink.
'Schluter Rondec' aluminium tile edging.
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 1 No. 15 0.00 0.00 0.00
3 118 TRAPS ETC 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 2 No. 15 0.00 0.00 0.00
3 118 0.00 0.00 0.00
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
435 x 335mm Springbok 2345 laboratory sink.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
Code 8790Z0 Acid resistant waste fitting comprising of waste, overflow pipe, etc.
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
3 118 0.00 0.00 0.00
3 118 3 No. 15 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 4 No. 1 0.00 0.00 0.00
3 118 5 No. 1 0.00 0.00 0.00
3 119 Gulleys: 0.00 0.00 0.00
3 119 6 No. 3 0.00 0.00 0.00
3 119 7 Item 2 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 8 m 33 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 9 No. 6 0.00 0.00 0.00
3 119 10 No. 21 0.00 0.00 0.00
3 119 11 No. 12 0.00 0.00 0.00
3 119 Sundries: 0.00 0.00 0.00
3 119 12 Item 5 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Cobra Watertech or similar approved':
PLUMBING AND DRAINAGE
15mm 115/046 Star laboratory tap.
PLUMBING AND DRAINAGE
SANITARY PLUMBING
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
40mm Access bend.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, two x 40mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
110mm Overflow gulley not exceeding 1m deep.
PLUMBING AND DRAINAGE
Testing waste pipe system.
PLUMBING AND DRAINAGE
SOIL DRAINAGE
PLUMBING AND DRAINAGE
uPVC pipes:
PLUMBING AND DRAINAGE
50mm Pipes.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
50mm Access bend.
PLUMBING AND DRAINAGE
50mm Bend.
PLUMBING AND DRAINAGE
50mm Junction.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing waste pipe system.
3 119 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 13 m 9 0.00 0.00 0.00
3 119 14 m 27 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 15 No. 30 0.00 0.00 0.00
3 120 16 No. 21 0.00 0.00 0.00
3 120 17 No. 3 0.00 0.00 0.00
3 120 TESTING 0.00 0.00 0.00
3 120 Testing: 0.00 0.00 0.00
3 120 18 Item 5 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 'Chubb': 0.00 0.00 0.00
3 120 19 No. 11 0.00 0.00 0.00
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
15mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
Connection of 22mm pipe to 25mm HDPE pipe.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
9kg Dry chemical fire extinguisher with backing board.
3 122 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 1 No. 7 0.00 0.00 0.00
3 122 2 No. 3 0.00 0.00 0.00
3 122 3 No. 3 0.00 0.00 0.00
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ELECTRICAL WORK
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Lockable distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock.
ELECTRICAL WORK
Distribution board build into wall.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
3 122 4 No. 5 0.00 0.00 0.00
3 122 5 No. 1 0.00 0.00 0.00
3 122 6 No. 1 0.00 0.00 0.00
3 122 CABLES 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 7 m 18 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 8 No. 5 0.00 0.00 0.00
3 123 EARTHING 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 9 m 9 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 10 No. 3 0.00 0.00 0.00
3 123 SLEEVES 0.00 0.00 0.00
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
16A Single pole circuit breaker.
ELECTRICAL WORK
40A Single pole earth leakage.
ELECTRICAL WORK
ELECTRICAL WORK
V PVC/SWA/PVC copper cable pulled in cable sleeves (sleeves measured elsewhere).
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere).
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
3 123 0.00 0.00 0.00
3 123 11 m 16 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 12 m 19 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 13 No. 7 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 14 m 367 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 15 m 141 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 16 m 104 0.00 0.00 0.00
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on UPVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Cast in concrete, surface bed or screed.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 17 No. 78 0.00 0.00 0.00
3 124 18 No. 22 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 19 No. 11 0.00 0.00 0.00
3 124 20 No. 22 0.00 0.00 0.00
3 124 21 No. 12 0.00 0.00 0.00
3 124 22 No. 11 0.00 0.00 0.00
3 125 23 No. 6 0.00 0.00 0.00
3 125 24 No. 6 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 25 2.5mm². m 358 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 26 1.5mm². m 78 0.00 0.00 0.00
3 125 27 2.5mm². m 557 0.00 0.00 0.00
3 125 28 4mm². m 224 0.00 0.00 0.00
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enameled fixed onto conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Metal type fixed onto PVC conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Cover plate for 100mm x 50mm box.
ELECTRICAL WORK
Cover plate for 100mm x 100mm box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORKELECTRICAL WORK
3 125 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 29 No. 27 0.00 0.00 0.00
3 125 30 No. 12 0.00 0.00 0.00
3 125 31 No. 15 0.00 0.00 0.00
3 125 32 No. 3 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 33 No. 6 0.00 0.00 0.00
3 126 34 No. 10 0.00 0.00 0.00
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
5A Three-pin unswitched socket outlet.
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
100VA Transformer with overload and short circuit protection, with 4mm² cabling to Zehender RG07 terminal post in a star-configuration.
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with lamps, connections, etc., mounted in position
ELECTRICAL WORK
'Lascon B10' ceiling mounted light fitting and bulb. (Type A)
ELECTRICAL WORK
'Lascon B10' wall mounted light fitting and bulb. (Type B)
3 126 35 No. 48 0.00 0.00 0.00
3 126 36 No. 18 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 37 No. 45 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 38 m 183 0.00 0.00 0.00
3 126 39 m 16 0.00 0.00 0.00
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light andfitting 1200mm long(Type C).
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light fitting and tubes (C).
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level:
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Conductors, etc.:
ELECTRICAL WORK
6mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
ELECTRICAL WORK
70mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
3 126 40 No. 12 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 1 No. 3 0.00 0.00 0.00
3 128 2 No. 3 0.00 0.00 0.00
3 128 TAPS, ETC 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 3 No. 15 0.00 0.00 0.00
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
MECHANICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
MECHANICAL WORK
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
MECHANICAL WORK
VALVES, ETC
MECHANICAL WORK
'Afrox' or other approved:
MECHANICAL WORK
15mm Brass ball valve.
MECHANICAL WORK
15mm Chrome gas angle valve.
MECHANICAL WORK
MECHANICAL WORK
'Brownall or other approved:
MECHANICAL WORK
Type CL 1265M two way gas cock.
3 128 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 4 m 21 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 5 No. 3 0.00 0.00 0.00
3 128 6 No. 3 0.00 0.00 0.00
3 129 7 15mm Tee. No. 15 0.00 0.00 0.00
3 129 8 No. 3 0.00 0.00 0.00
3 GLAZING 131 0.00 0.00 0.00
3 GLAZING 131 0.00 0.00 0.00
3 GLAZING 131 0.00 0.00 0.00
3 GLAZING 131 0.00 0.00 0.00
MECHANICAL WORK
GAS SUPPLIES
MECHANICAL WORK
Class O copper pipes:
MECHANICAL WORK
15mm Pipes fixed to wall.
MECHANICAL WORK
Extra over class O copper pipes for fittings:
MECHANICAL WORK
15mm stop plug.
MECHANICAL WORK
15mm Wall plate elbow.
MECHANICAL WORK
MECHANICAL WORK
15mm BSP male connector.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet BlocksGLAZING TO STEEL WITH PUTTY4mm Clear float glass:
3 GLAZING 131 1 m² 68 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 1 m² 86 0.00 0.00 0.00
Panes exceeding 0,1m2 and not exceeding 0,5m2.
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
PAINTWORK
ON FLOATED PLASTER
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA(allow sufficient time for drying between coats):
PAINTWORK
On external floated plaster walls.
3 132 2 m 526 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 3 m² 883 0.00 0.00 0.00
3 132 4 m 334 0.00 0.00 0.00
3 132 0.00 0.00 0.00
3 132 5 m² 30 0.00 0.00 0.00
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Eggshell Enamel (allow sufficient time for drying between coats):
PAINTWORK
On internal floated plaster walls.
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
One coat primer and two coats exterior quality PVA emulsion paint:
PAINTWORK
On external floated plaster walls.
3 133 6 m 196 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 7 m² 332 0.00 0.00 0.00
3 133 8 m 196 0.00 0.00 0.00
3 133 0.00 0.00 0.00
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
One coat alkali resistant primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
On internal floated plaster walls.
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
ON SOFT BOARD
3 133 0.00 0.00 0.00
3 133 9 m² 51 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 10 m 33 0.00 0.00 0.00
3 133 ON METAL 0.00 0.00 0.00
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat Plascon Wood Primer followed by one coat Plascon Universal Undercoat before aplying two coats Plascon Polyurethane Velvaglo. (allow sufficient time drying between coats):
PAINTWORK
On pinning boards..
PAINTWORK
ON FIBRE-CEMENT
PAINTWORK
Clean the surface and apply one coat Plascon Alkali Resistant Plaster Primer and two coats Plascon Pure Acrylic PVA. (allow sufficient time for drying between coats):
PAINTWORK
On cills not exceeding 300 mm girth.
PAINTWORK
3 133 0.00 0.00 0.00
3 133 11 m² 8 0.00 0.00 0.00
3 133 12 m² 41 0.00 0.00 0.00
3 134 13 m² 128 0.00 0.00 0.00
3 134 0.00 0.00 0.00
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and apply one coat Plascon Universal Undercoat and two coats Plascon Polyurethane Velvaglo (allow sufficient time for drying between coats):
PAINTWORK
On door frames.
PAINTWORK
On combination doors and frames.
PAINTWORK
On windows with burglar bars.
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and apply one coat Plascon Universal Undercoat and two coats Plascon Super Universal Enamel (allow sufficient time for drying between coats):
3 134 14 m² 32 0.00 0.00 0.00
3 134 15 m² 189 0.00 0.00 0.00
3 134 16 m 30 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 17 m² 507 0.00 0.00 0.00
3 134 0.00 0.00 0.00
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On members of roof trusses.
PAINTWORK
On rails, bars, pipes, etc not exceeding 300 mm girth.
PAINTWORK
Wash down with Plascon Galvanised Iron Cleaner, rinse with water and apply one coat Plascon Galvanised Iron Primer and two coats Plascon Waterbased Enamel White on galvanised steel ( allow sufficient time for drying between coats):
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
3 134 18 m² 3 0.00 0.00 0.00
3 134 19 m² 97 0.00 0.00 0.00
3 134 20 m² 4 0.00 0.00 0.00
3 134 21 m² 64 0.00 0.00 0.00
3 135 22 m² 43 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 23 m² 12 0.00 0.00 0.00
3 135 24 m² 70 0.00 0.00 0.00
3 135 0.00 0.00 0.00
PAINTWORK
On door frames.
PAINTWORK
On combination doors and frames.
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On windows with burglar bars.
PAINTWORK
On members of roof trusses.
PAINTWORK
One coat calcium plumbate primer, one undercoat and two coats enamel paint on steel:
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On members of roof trusses.
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
3 135 25 m² 334 0.00 0.00 0.00
3 135 ON WOOD 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 26 On doors. m² 29 0.00 0.00 0.00
3 135 27 m² 24 0.00 0.00 0.00
3 135 28 m 138 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 29 m 171 0.00 0.00 0.00
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat Plascon Wood Primer followed by one coat Plascon Universal Undercoat before aplying two coats Plascon Polyurethane Velvaglo. (allow sufficient time drying between coats):
PAINTWORK
PAINTWORK
On general surfaces of fittings.
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
Apply three coats of Plascon Polyurethene Varnish (allow sufficient time for drying between coats):
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
3 136 0.00 0.00 0.00
3 136 30 On doors. m² 11 0.00 0.00 0.00
3 136 31 m² 8 0.00 0.00 0.00
3 136 32 m 51 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 33 m 64 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 34 No. 15 0.00 0.00 0.00
PAINTWORK
One coat wood primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
PAINTWORK
On general surfaces of fittings.
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
Three coats clear varnish:
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
SIGNWRITING
PAINTWORK
Remove all loose particles and laitance and appl one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA(allow sufficient time for drying between coats):
PAINTWORK
Numeral or letter 500mm high.
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 1 Holes. m3 0.9 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 2 m² 9 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 3 m 21 0.00 0.00 0.00
3 138 Bolts: 0.00 0.00 0.00
3 138 4 No. 6 0.00 0.00 0.00
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
The Following bills cater for:
A:1 x Specialist Classroom BlocksB:2 x Waterborne Toilet Blocks
EXTERNAL WORKS
THE FOLLOWING IN FLAG POLE
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a steel trowel:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Rough Formwork to Sides:
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide.
EXTERNAL WORKS
EXTERNAL WORKS
M10 x 75mm Bolts.
3 138 Flagpole: 0.00 0.00 0.00
3 138 5 m 15 0.00 0.00 0.00
3 138 6 No. 6 0.00 0.00 0.00
3 139 7 No. 3 0.00 0.00 0.00
3 139 8 No. 3 0.00 0.00 0.00
3 139 9 No. 3 0.00 0.00 0.00
3 139 0.00 0.00 0.00
3 139 10 m 5 0.00 0.00 0.00
3 139 11 m² 1 0.00 0.00 0.00
3 139 0.00 0.00 0.00
3 139 uPVC: 0.00 0.00 0.00
EXTERNAL WORKS
EXTERNAL WORKS
50mm Diameter galvanised pipe.
EXTERNAL WORKS
100 x 40 x 2.5mm Channel 2000mm long and cast into concrete 500mm deep.
EXTERNAL WORKS
6mm Diameter bend eye 35mm girth welded to 50mm diameter flagpole.
EXTERNAL WORKS
Fixing hook formed with two 6mm Diameter round bar bend to right angles 45mm and welded to upright.
EXTERNAL WORKS
Extra over 50mm diameter pipe for closed end.
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
SOIL DRAINAGE
EXTERNAL WORKS
3 139 12 Item 2 0.00 0.00 0.00
3 139 13 m 75 0.00 0.00 0.00
3 139 0.00 0.00 0.00
3 139 14 No. 3 0.00 0.00 0.00
3 139 0.00 0.00 0.00
3 139 15 No. 3 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 16 No. 1 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 Brass: 0.00 0.00 0.00
3 140 17 No. 1 0.00 0.00 0.00
3 140 Sundries: 0.00 0.00 0.00
EXTERNAL WORKS
Connection to existing water supply including all necessary fittings.
EXTERNAL WORKS
110mm Pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
Inspection chambers (covers elsewhere):
EXTERNAL WORKS
Inspection chamber 450 x 450mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Gratings, covers, etc:
EXTERNAL WORKS
450 x 450mm x 45kg Cast iron single seal manhole cover and frame.
EXTERNAL WORKS
THE FOLLOWING IN WASHING LINE
EXTERNAL WORKS
Washing line including two coats aluminium paint on metal stays, framing, etc
EXTERNAL WORKS
35mm Elbow.
EXTERNAL WORKS
TAPS, VALVES, ETC
EXTERNAL WORKSEXTERNAL WORKS
35mm Stopcock.
EXTERNAL WORKS
3 140 18 No. 1 0.00 0.00 0.00
3 140 CABLES 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 19 No. 1 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 Sundries: 0.00 0.00 0.00
3 140 20 Item 5 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 0.00 0.00 0.00
3 140 21 m 90 0.00 0.00 0.00
3 140 22 m² 24 0.00 0.00 0.00
3 141 0.00 0.00 0.00
EXTERNAL WORKS
350 x 350mm Cast iron stopcock box including brick chamber below not exceeding 1000mm deep internally.
EXTERNAL WORKS
EXTERNAL WORKS
Termination for bare and PVC insulated copper conductors including lugs and connections.
EXTERNAL WORKS
10mm2 Conductor.
EXTERNAL WORKS
WATER RETICULATION
EXTERNAL WORKS
EXTERNAL WORKS
Connect to existing water supply including water meter and all necessary fittings.
EXTERNAL WORKS
ELECTRICAL RETICULATION
EXTERNAL WORKS
600/1000 V PVC/PVC/SWA/PVC copper cable laid in and including trenches and backfilling.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
One and a half brick wall.
EXTERNAL WORKS
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
3 141 23 No. 3 0.00 0.00 0.00
3 141 0.00 0.00 0.00
3 141 24 m 90 0.00 0.00 0.00
3 141 25 m 40 0.00 0.00 0.00
3 141 0.00 0.00 0.00
3 141 26 No. 3 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
Bare copper earth conductor installed with cable (cable measured elsewhere).
EXTERNAL WORKS
6mm2 Conductor.
EXTERNAL WORKS
10mm2 Conductor.
EXTERNAL WORKS
Termination for bare and PVC insulated copper conductors including lugs and connections.
EXTERNAL WORKS
6mm2 Conductor.
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
Making good damaged work, etc:
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 146 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
4 146 0.00 0.00 0.00
4 146 1 Steps. m³ 22 0.00 0.00 0.00
4 147 0.00 0.00 0.00
4 147 2 m³ 3 0.00 0.00 0.00
4 147 3 Columns. m³ 3 0.00 0.00 0.00
4 147 0.00 0.00 0.00
4 147 4 m³ 3 0.00 0.00 0.00
4 147 5 m² 3 0.00 0.00 0.00
4 147 6 m² 3 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
ALTERATIONS
Breaking up and removing reinforced concrete including cutting off and removing reinforcement:
ALTERATIONS
Stairs and landings.
ALTERATIONS
ALTERATIONS
Breaking down and removing brickwork etc:
ALTERATIONS
Mass brickwork.
ALTERATIONS
Half brick wall.
ALTERATIONS
One brick wall.
4 147 0.00 0.00 0.00
4 147 7 m 956 0.00 0.00 0.00
4 149 0.00 0.00 0.00
4 149 0.00 0.00 0.00
4 149 0.00 0.00 0.00
ALTERATIONS
Taking out/off and removing sundry metalwork:
ALTERATIONS
1,800mm High wire mesh security fence complete standard columns, posts, stays, bracers, etc.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary preambles which are incorporated in this Bill
EXTERNAL WORKS
THE FOLLOWING IN WATER TANK AND STAND
EXTERNAL WORKS
Rain Water Tanks:
4 149 1 No. 3 0.00 0.00 0.00
4 149 0.00 0.00 0.00
4 149 2 Holes. m³ 7 0.00 0.00 0.00
4 149 0.00 0.00 0.00
4 149 3 m³ 7 0.00 0.00 0.00
4 149 0.00 0.00 0.00
EXTERNAL WORKS
10,000 Litre approved polyethylene water container as manufactured by Namibia Roto Mould (Pty) complete with overflow pipe, installed on stand approximately 7,000mm above ground level.
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EXTERNAL WORKS
Off site to a dumping site to be found by the Contractor.
EXTERNAL WORKS
Approved brand of weedkiller mixed with an approved brand of termite poison and applied in accordance with the manufacturer's instructions:
4 149 4 m² 15 0.00 0.00 0.00
4 149 0.00 0.00 0.00
4 149 5 Tonnes 0.23 0.00 0.00 0.00
4 149 6 Tonnes 0.12 0.00 0.00 0.00
4 150 7 Tonnes 0.12 0.00 0.00 0.00
4 150 0.00 0.00 0.00
4 150 8 Tonnes 1.22 0.00 0.00 0.00
4 150 9 Tonnes 0.3 0.00 0.00 0.00
4 150 0.00 0.00 0.00
4 150 10 m² 8 0.00 0.00 0.00
4 150 11 m² 3 0.00 0.00 0.00
4 150 0.00 0.00 0.00
4 150 12 Tonnes 0.46 0.00 0.00 0.00
EXTERNAL WORKS
To bottom of trenches, etc.
EXTERNAL WORKS
Mild steel reinforcement to structural concrete work:
EXTERNAL WORKS
12mm Diameter bars.
EXTERNAL WORKS
10mm Diameter bars.
EXTERNAL WORKS
8mm Diameter bars.
EXTERNAL WORKS
Welded columns in single lengths with flat section base, top, bearer and connection plates bolted to concrete:
EXTERNAL WORKS
406 x 140mm x 46kg/m I-section columns
EXTERNAL WORKS
70 x 70 x 6mm x 6.38kg/m angle section columns.
EXTERNAL WORKS
Rough Formwork to Sides:
EXTERNAL WORKS
Bases (Provisional).
EXTERNAL WORKS
Rectangular columns.
EXTERNAL WORKS
High tensile steel reinforcement to structural concrete work:
EXTERNAL WORKS
12mm Diameter bars.
4 150 0.00 0.00 0.00
4 150 13 Tonnes 0.74 0.00 0.00 0.00
4 150 14 Tonnes 0.67 0.00 0.00 0.00
4 150 0.00 0.00 0.00
4 150 15 Kg 5 0.00 0.00 0.00
4 150 16 Kg 84 0.00 0.00 0.00
4 151 17 m 9 0.00 0.00 0.00
4 151 18 No. 2 0.00 0.00 0.00
4 151 19 m 17 0.00 0.00 0.00
EXTERNAL WORKS
Welded beams in single lengths with flat section bearer and connection plates bolted to steel columns:
EXTERNAL WORKS
203 x 133mm x 25.3kg/m IPE-section beams.
EXTERNAL WORKS
120 x 55 x 13mm x 13.4kg/m channel section sleepers.
EXTERNAL WORKS
Welded bracing etc with flat section connection plates bolted to steel:
EXTERNAL WORKS
12mm Diameter mild steel ladder rungs with both ends welded to stringers.
EXTERNAL WORKS
20mm Diameter mild steel braces welded to gussets.
EXTERNAL WORKS
51mm Diameter x 3 mm thick mild steel cat ladder stringers.
EXTERNAL WORKS
Extra on last for closed end.
EXTERNAL WORKS
50 x 50 x 2,5mm Hollow-section steel beam with ends welded to columns.
4 151 20 m 13 0.00 0.00 0.00
4 151 21 m 0.25 0.00 0.00 0.00
4 151 22 No. 4 0.00 0.00 0.00
4 151 23 No. 1 0.00 0.00 0.00
4 151 24 No. 2 0.00 0.00 0.00
4 151 25 No. 1 0.00 0.00 0.00
4 151 26 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
100 x 75 x 20 x 2,5mm Lipped channel-section track for level indicator welded to bracket.
EXTERNAL WORKS
100 x 50 x 25 x 3mm Top hat section track for level indicator welded to bracket.
EXTERNAL WORKS
10mm Diameter Ramset or other approved chemical bolt including hole in concrete or brickwork.
EXTERNAL WORKS
Approved steel chain approximately 200mm long bolted at both ends to channel with and including 6mm bolts.
EXTERNAL WORKS
50mm Diameter Approved Teflon pulley fixed to channel with and including 6mm diameter black bolt.
EXTERNAL WORKS
75 x 40 x 4,5mm Channel-section level indicator 350mm long.
EXTERNAL WORKS
100mm Diameter approved brass spherical float fixed to steel rope.
4 151 27 No. 4 0.00 0.00 0.00
4 151 28 m 14 0.00 0.00 0.00
4 152 29 No. 2 0.00 0.00 0.00
4 152 30 No. 24 0.00 0.00 0.00
4 152 31 No. 1 0.00 0.00 0.00
4 152 32 Tonnes 0.24 0.00 0.00 0.00
4 152 33 Tonnes 0.31 0.00 0.00 0.00
EXTERNAL WORKS
60 x 60 x 3mm Hollow-section steel column approximately 3,475 m long including welding top to steel beam and bottom to base plate.
EXTERNAL WORKS
Mentis ball type hollow-section horizontal handrail through stanchions.
EXTERNAL WORKS
Extra on last for Item 2M 90º straight closure bend.
EXTERNAL WORKS
Mentis Ball type MT90 or other approved 34,13mm diameter handrail stanchion approximately 1m high.
EXTERNAL WORKS
150 x 150 x 5mm Thick stainless steel flat-section four times holed for and including 10mm stainless steel bolts with heads, nuts and washers fixed through top of rainwater tank.
EXTERNAL WORKS
Angle section bracing.
EXTERNAL WORKS
40 x 6mm x 1.88kg/m flat section cross bracers.
4 152 0.00 0.00 0.00
4 152 34 m3 0.24 0.00 0.00 0.00
4 152 35 Bases. m³ 7 0.00 0.00 0.00
4 152 0.00 0.00 0.00
4 152 36 No. 1 0.00 0.00 0.00
4 152 0.00 0.00 0.00
4 152 37 Tonnes 0.05 0.00 0.00 0.00
4 152 38 No. 12 0.00 0.00 0.00
4 152 0.00 0.00 0.00
4 152 39 Soft rock. m³ 1 0.00 0.00 0.00
4 153 0.00 0.00 0.00
EXTERNAL WORKS
35 MPa/19mm Reinforced Concrete:
EXTERNAL WORKS
Stub columns.
EXTERNAL WORKS
EXTERNAL WORKS
15Mpa/19mm Unreinforced Concrete:
EXTERNAL WORKS
4mm Diameter stainless steel wire rope approximately 4,000mm long.
EXTERNAL WORKS
Bolts to columns, beams, etc:
EXTERNAL WORKS
High tensile bolts.
EXTERNAL WORKS
16mm Diameter U-shaped anchor bolt 1150mm girth.
EXTERNAL WORKS
Extra over excavations other than bulk in earth for excavation in:
EXTERNAL WORKS
EXTERNAL WORKS
Wecrolok type PT 90 welded and bolted patent balustrading to steel tower summit:
4 153 40 m 22 0.00 0.00 0.00
4 153 41 No. 4 0.00 0.00 0.00
4 153 42 No. 2 0.00 0.00 0.00
4 153 0.00 0.00 0.00
4 153 43 m 30 0.00 0.00 0.00
EXTERNAL WORKS
Horizontal balustrading 900mm high of continuous pipe top, middle and bottom rails and approved stanchions at average 800mm centres bolted to steel beam with approved bolts.
EXTERNAL WORKS
Extra over 900mm high balustrading for curved L-intersection of horizontal balustrading.
EXTERNAL WORKS
900mm high balustrade for straight end closure piece.
EXTERNAL WORKS
Prepare surfaces and remove all loose material, dust, grease, salts and contamination with 'Plascon Aquasolve Degreaser GR1', rinse and apply one coat 'Plascon Galvogrip Metal Primer', apply one coat 'Plascon Merit Universal Undercoat' and two coats 'Pla
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
4 153 0.00 0.00 0.00
4 153 44 m² 8 0.00 0.00 0.00
4 153 0.00 0.00 0.00
4 153 45 m² 15 0.00 0.00 0.00
4 154 0.00 0.00 0.00
4 154 0.00 0.00 0.00
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Surface Preparation:
EXTERNAL WORKS
Trim and level off surface of ground (excavated or filled under this Contract) to receive concrete surface beds, including excavating or filling, ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at lea
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
4 154 46 m² 315 0.00 0.00 0.00
4 154 FENCING 0.00 0.00 0.00
4 154 0.00 0.00 0.00
4 154 47 m 870 0.00 0.00 0.00
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EXTERNAL WORKS
EXTERNAL WORKS
Security fencing, gates, etc including two coats bitumious aluminium paint on metal stays, framing, etc:
EXTERNAL WORKS
Security fencing 2,100mm high vertically formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanised razor wires ' bar
4 154 48 m 870 0.00 0.00 0.00
4 154 49 m 90 0.00 0.00 0.00
4 154 50 No. 73 0.00 0.00 0.00
EXTERNAL WORKS
Mass concrete 20Mpa/19mm ground beam 150 x 350mm deep including necessary excavation, formwork, backfilling, etc,.
EXTERNAL WORKS
2,100mm high diamond razor wire mesh, formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanised razor wires ' barbe
EXTERNAL WORKS
Horizontal stay 76mm diameter 2000mm long with each end bolted to posts.
4 154 51 No. 12 0.00 0.00 0.00
4 155 52 No. 33 0.00 0.00 0.00
4 155 53 No. 13 0.00 0.00 0.00
EXTERNAL WORKS
Inclined stay 50mm diameter 2500mm long with one end bolted to post and other end welded to 200 x 200 x 5mm sole plate and cast into and including (750 x 400 x 400 mm deep 15Mpa/19) concrete base.
EXTERNAL WORKS
Straining post 100mm diameter 2,100mm high vertically, with 200 x 200 x 5mm sole plate and cast into and including (500 x 500 x 900mm 15Mpa/19) concrete base.
EXTERNAL WORKS
Corner post 100mm diameter 2,100 mm high vertically with 200 x 200x 5 mm sole plate and cast into and including (500 x 500 x 900 mm 15 Mpa/19) concrete base
4 155 54 No. 6 0.00 0.00 0.00
4 155 55 No. 6 0.00 0.00 0.00
EXTERNAL WORKS
Single gate 1,000 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
EXTERNAL WORKS
Single gate 1,500 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
4 155 56 No. 6 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 57 Trenches m³ 542 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 58 m² 1500 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 59 Tonnes 0.23 0.00 0.00 0.00
EXTERNAL WORKS
Double gate 5,000 x 2,100mm high in equal leaves, each leave formed of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbe
EXTERNAL WORKS
THE FOLLOWING IN YARD WALL.
EXTERNAL WORKS
Excavation not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep
EXTERNAL WORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically vibrated:
EXTERNAL WORKS
10mm Diameter bars.
4 156 60 m³ 52 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 61 m³ 267 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 62 Item 3 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 63 m³ 136 0.00 0.00 0.00
4 156 0.00 0.00 0.00
4 156 64 m² 791 0.00 0.00 0.00
4 157 65 m² 1009 0.00 0.00 0.00
4 157 66 m² 156 0.00 0.00 0.00
4 157 0.00 0.00 0.00
EXTERNAL WORKS
In trenches, holes, etc under strip footings.
EXTERNAL WORKS
Selected earth filling supplied by the contractor under floor, etc (material to comply with CBR>40%) in layers and compacted to 98% Mod AASHTO density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc.
EXTERNAL WORKS
Keeping excavations free of water:
EXTERNAL WORKS
Keeping excavations free of all water other than subterranean water
EXTERNAL WORKS
25 MPa/19mm Unreinforced concrete:
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Brickwork of cement bricks (7 MPa nominal compressive strength) in Class I mortar:
EXTERNAL WORKS
One brick walls in foundations.
EXTERNAL WORKS
One brick wall.
EXTERNAL WORKS
Two brick walls batress in foundations.
EXTERNAL WORKS
Brickwork reinforcement:
4 157 67 m 8202 0.00 0.00 0.00
4 157 68 m 9480 0.00 0.00 0.00
4 157 0.00 0.00 0.00
4 157 69 m² 164 0.00 0.00 0.00
4 157 0.00 0.00 0.00
4 157 70 No. 12 0.00 0.00 0.00
4 157 71 On walls. m² 3435 0.00 0.00 0.00
4 157 72 m² 174 0.00 0.00 0.00
4 157 0.00 0.00 0.00
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally.
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally in foundations.
EXTERNAL WORKS
Joint forming material in movement joints:
EXTERNAL WORKS
10mm Bitumen impregnated fibre board built in vertically between brick skins.
EXTERNAL WORKS
External cement plaster on brickwalls:
EXTERNAL WORKS
80 x 4,5mm Mentis type RS80 horizontal galvanised grid in 3m long x 750mm wide sheets.
EXTERNAL WORKSEXTERNAL WORKS
On narrow widths.
EXTERNAL WORKS
Remove all loose particles and laitance and apply one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA (allow sufficient time for drying between coats).
4 157 73 m² 3595 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 74 Trenches. m³ 12 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 75 m² 54 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 76 m³ 6 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 77 m³ 5 0.00 0.00 0.00
EXTERNAL WORKS
On external textured plaster walls.
EXTERNAL WORKS
THE FOLLOWING IN DRINKING FOUNTAIN
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc
EXTERNAL WORKS
Filling with material supplied by the Contractor compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Under floors, pavings, etc.
4 158 0.00 0.00 0.00
4 158 78 m² 12 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 79 No. 6 0.00 0.00 0.00
4 158 0.00 0.00 0.00
4 158 80 m³ 6 0.00 0.00 0.00
4 158 81 m³ 3 0.00 0.00 0.00
4 159 0.00 0.00 0.00
4 159 82 m³ 6 0.00 0.00 0.00
EXTERNAL WORKS
Approved brand of weedkiller mixed with proved brand of anti-termite soil poison and applied in accordance with the manufacturer's instructions:
EXTERNAL WORKS
To bottoms and sides of trenches, etc.
EXTERNAL WORKS
Precast concrete left rough from the mould including bedding, jointing and pointing:
EXTERNAL WORKS
1990mm Diameter concrete ring 465 mm wide x 150mm thick and with 100 x 75mm channel allround including necessary reinforcement.
EXTERNAL WORKS
20Mpa/19mm Concrete
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
25 MPa/19mm Concrete:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc.
4 159 0.00 0.00 0.00
4 159 83 Hard rock. m³ 1 0.00 0.00 0.00
4 159 84 No. 40 0.00 0.00 0.00
4 159 0.00 0.00 0.00
4 159 85 m² 30 0.00 0.00 0.00
4 159 0.00 0.00 0.00
4 159 86 m 60 0.00 0.00 0.00
4 159 0.00 0.00 0.00
4 159 87 m² 10 0.00 0.00 0.00
4 159 0.00 0.00 0.00
EXTERNAL WORKS
100mm Diameter fibre cement pipe filled solid with 25 MPa/19mm Concrete:
EXTERNAL WORKS
EXTERNAL WORKS
Column 1340mm long.
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a wood float:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Smooth Formwork to Sides:
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide circular exceeding 1m radius.
EXTERNAL WORKS
Permanent formwork to Soffits left in place:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc. propped up not exceeding 1,5m high.
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar:
4 159 88 m² 9 0.00 0.00 0.00
4 159 89 m² 6 0.00 0.00 0.00
4 159 90 m² 12 0.00 0.00 0.00
4 160 0.00 0.00 0.00
4 160 91 No. 48 0.00 0.00 0.00
4 160 Wire Mesh 0.00 0.00 0.00
4 160 92 m² 32 0.00 0.00 0.00
4 160 0.00 0.00 0.00
4 160 93 On walls. m² 21 0.00 0.00 0.00
4 160 0.00 0.00 0.00
4 160 94 No. 6 0.00 0.00 0.00
EXTERNAL WORKS
365mm Hollow walls of two half brick skins and cavity filled solid with hardcore filling no wire ties circular on plan in foundations.
EXTERNAL WORKS
One brick wall circular on plan.
EXTERNAL WORKS
Hollow walls of two half brick grilled skins and cavity filled with charcoal no wire ties circular on plan.
EXTERNAL WORKS
Metalwork Sundries:
EXTERNAL WORKS
1.5 x 19mm Flat metal ring 130mm diameter soldered to underside of water tray (water tray elsewhere measured.
EXTERNAL WORKS
EXTERNAL WORKS
Galvanised wire mesh with 6 x 6mm screen opening.
EXTERNAL WORKS
Cement plaster on brickwork:
EXTERNAL WORKSEXTERNAL WORKS
Galvanised sheet iron:
EXTERNAL WORKS
1.2mm Thick 1550mm Diameter tray 150mm deep including 2mm diameter holes drilled at 150mm centres in base.
4 160 0.00 0.00 0.00
4 160 95 No. 48 0.00 0.00 0.00
4 160 0.00 0.00 0.00
4 160 96 m 36 0.00 0.00 0.00
4 160 97 m² 53 0.00 0.00 0.00
4 160 0.00 0.00 0.00
4 160 98 No. 150 0.00 0.00 0.00
4 160 99 Kg 68 0.00 0.00 0.00
4 161 0.00 0.00 0.00
4 161 100 No. 6 0.00 0.00 0.00
5 165 0.00 0.00 0.00
5 165 0.00 0.00 0.00
EXTERNAL WORKS
'Cobra Watertech' 'Demand' 'Mastermatic, etc. bibtaps:
EXTERNAL WORKS
15mm Rough brass 'Demand' bibtap (code KM2.203-15).
EXTERNAL WORKS
Class O copper pipes:
EXTERNAL WORKS
15mm Pipes.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
Extra over class O copper pipes for capillary fittings:
EXTERNAL WORKS
15mm Fittings.
EXTERNAL WORKS
Angle-section edge to platform and tank fixing brackets.
EXTERNAL WORKS
"Namibian Roto Mould" Plastic water tank:
EXTERNAL WORKS
1000l Water tank.
PROVISIONAL SUMS
JOINERY FITTINGS
PROVISIONAL SUMS
Joinery fittings:
5 165 1 Item 1 0.00 0.00 0.00
5 165 2 Item 1 0.00 0.00 0.00
5 165 3 Item 1 0.00 0.00 0.00
5 165 0.00 0.00 0.00
5 165 0.00 0.00 0.00
5 165 4 Item 1 0.00 0.00 0.00
5 165 5 Item 1 0.00 0.00 0.00
5 165 6 Item 1 0.00 0.00 0.00
PROVISIONAL SUMS
Provide the amount of N$ 150, 000. 00 (One Hundred and Fifty Thousand Namibian Dollars) for replacement of all damaged Joinery Fittings and supply and elivery of new Durashake cupboards.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
ELECTRICAL SUPPLY INSTALLATION
PROVISIONAL SUMS
Electrical supply installation:
PROVISIONAL SUMS
Provide the amount of N$ 500,000.00 (Five Hundred Thousand Namibian Dollars) for Electrical installation to the national grid including testing and commisioning to Gustav Kandjii and Reitquelle.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
Section Trade Page Item Description Uom Quantity Time Fixed Value
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
PRELIMINARIES
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PRELIMINARIES
PREAMBLES FOR TRADES
PRELIMINARIES
The Model Preambles for Trades (2008 edition) as published by the Association of South African Quantity Surveyors shall be deemed to be incorporated in these bills of quantities and no claims arising from brevity of description of items fully described in
LEGAL NOTE:Due to possibilities of data loses from converting these bills from the native format to excel worksheet, Omugongo management and it's represantatives will not be held liable to discrepencies between the PDF documents obtain from the MCA office and these excel files. The Contractor is urged to check these files against the PDF's and that in case of any discrepancies the PDFs will prevail, thus the Contractor will be using these files at own risk.
Signed:ManagementOmugongo JV
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 1 Item 1 0.00 0.00 0.00
1 2 2 Item 1 0.00 0.00 0.00
1 2 3 Item 1 0.00 0.00 0.00
1 2 4 Item 1 0.00 0.00 0.00
PRELIMINARIES
Supplementary preambles are incorporated in these bills of quantities to satisfy the requirements of this project. Such supplementary preambles shall take precedence over the provisions of the said Model Preambles
PRELIMINARIES
The contractor's prices for all items throughout these bills of quantities must take account of and include for all of the obligations, requirements and specifications given in the said Model Preambles and in any supplementary preambles
PRELIMINARIES
SECTION A - GENERAL CONDITIONS
PRELIMINARIES
1.0 - GENERAL PROVISIONS
PRELIMINARIES
Clause 1.1 - Definitions
PRELIMINARIES
Clause 1.2 - Interpretation
PRELIMINARIES
Clause 1.3 - Communications
PRELIMINARIES
Clause 1.4 - Law and Language
1 2 5 Item 1 0.00 0.00 0.00
1 2 6 Item 1 0.00 0.00 0.00
1 3 7 Item 1 0.00 0.00 0.00
1 3 8 Item 1 0.00 0.00 0.00
1 3 9 Item 1 0.00 0.00 0.00
1 3 10 Item 1 0.00 0.00 0.00
1 3 11 Item 1 0.00 0.00 0.00
1 3 12 Item 1 0.00 0.00 0.00
1 3 13 Item 1 0.00 0.00 0.00
1 3 14 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.5 - Priority of Documents
PRELIMINARIES
Clause 1.6 - Contract Agreement
PRELIMINARIES
Clause 1.7 - Assigment
PRELIMINARIES
Clause 1.8 - Care and Supply of Documents
PRELIMINARIES
- Delayed Drawings or Instructions
PRELIMINARIES
Clause 1.10 - Employer's Use of Contractor's Documents
PRELIMINARIES
Clause 1.11 - Contractor's Use of Employer's Documents
PRELIMINARIES
Clause 1.12 - Confidential Details
PRELIMINARIES
Clause 1.13 - Compliance with Laws
PRELIMINARIES
Clause 1.13 - Compliance with Laws[a]Contractor to comply with the Namibia Environmental Management Act No.7 of year 2007 as well as the Environmental Assessment Policy of year 1995 by implementing the Environmental Management Plans (EMP) documented se
1 3 15 Item 1 0.00 0.00 0.00
1 4 16 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 17 Item 1 0.00 0.00 0.00
1 4 18 Item 1 0.00 0.00 0.00
1 4 19 Item 1 0.00 0.00 0.00
1 4 20 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 21 Item 1 0.00 0.00 0.00
1 4 22 Item 1 0.00 0.00 0.00
1 4 23 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.13 - Compliance with Laws[b]Contractor to comply with the Namibia Public Health and Safety Management Policy under Act No. 11 of year 2007 by implementing the Public Health and Safety Awareness Plan (PHSAP) documented separately as part of th
PRELIMINARIES
Clause 1.14 - Joint and Several Liability
PRELIMINARIES
2.0 - THE EMPLOYER
PRELIMINARIES
Clause 2.1 - Right of Access to the Site
PRELIMINARIES
Clause 2.2 - Permits, Licences or Approvals
PRELIMINARIES
Clause 2.3 - Employer's Personnel
PRELIMINARIES
Clause 2.4 - Employer's Financial Arrangement
PRELIMINARIES
2.0 - THE ENGINEER
PRELIMINARIES
Clause 3.1 - Engineer's Duties and Authority
PRELIMINARIES
Clause 3.2 - Delegation by the Engineer
PRELIMINARIES
Clause 3.3 - Instructions of the Engineer
1 4 24 Item 1 0.00 0.00 0.00
1 4 25 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 26 Item 1 0.00 0.00 0.00
1 4 27 Item 1 0.00 0.00 0.00
1 5 28 Item 1 0.00 0.00 0.00
1 5 29 Item 1 0.00 0.00 0.00
1 5 30 Item 1 0.00 0.00 0.00
1 5 31 Item 1 0.00 0.00 0.00
1 5 32 Item 1 0.00 0.00 0.00
1 5 33 Item 1 0.00 0.00 0.00
1 5 34 Item 1 0.00 0.00 0.00
1 5 35 Item 1 0.00 0.00 0.00
1 5 36 Item 1 0.00 0.00 0.00
1 5 37 Item 1 0.00 0.00 0.00
1 5 38 Item 1 0.00 0.00 0.00
1 5 39 Item 1 0.00 0.00 0.00
1 5 40 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 3.4 - Replacement of the Engineer
PRELIMINARIES
Clause 3.5 - Determinations
PRELIMINARIES
4.0 - THE CONTRACTOR
PRELIMINARIES
Clause 4.1 - Contractor's General Obligations
PRELIMINARIES
Clause 4.2 - Performance Security
PRELIMINARIES
Clause 4.3 - Contactor's Security
PRELIMINARIES
Clause 4.4 - Subcontractors
PRELIMINARIES
Clause 4.5 - Assignment of Bennefit of Subcontract
PRELIMINARIES
Clause 4.6 - Co-operation
PRELIMINARIES
Clause 4.7 - Setting Out
PRELIMINARIES
Clause 4.8 - Safety Procedures
PRELIMINARIES
Clause 4.9 - Quality Assurance
PRELIMINARIES
Clause 4.10 - Site Data
PRELIMINARIES
Clause 4.11 - Sufficiency of the Accepted Contract Amount
PRELIMINARIES
Clause 4.12 - Unforseeable Physical Conditions
PRELIMINARIES
Clause 4.13 - Rights of Way and Facilities
PRELIMINARIES
Clause 4.14 - Avoidance of Interference
PRELIMINARIES
Clause 4.15 - Access Route
1 6 41 Item 1 0.00 0.00 0.00
1 6 42 Item 1 0.00 0.00 0.00
1 6 43 Item 1 0.00 0.00 0.00
1 6 44 Item 1 0.00 0.00 0.00
1 6 45 Item 1 0.00 0.00 0.00
1 6 46 Item 1 0.00 0.00 0.00
1 6 47 Item 1 0.00 0.00 0.00
1 6 48 Item 1 0.00 0.00 0.00
1 6 49 Item 1 0.00 0.00 0.00
1 6 0.00 0.00 0.00
1 6 50 Item 1 0.00 0.00 0.00
1 6 51 Item 1 0.00 0.00 0.00
1 6 52 Item 1 0.00 0.00 0.00
1 6 53 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
PRELIMINARIES
Clause 4.16 - Transport of Goods
PRELIMINARIES
Clause 4.17 - Contractor's Equipment
PRELIMINARIES
4.18 - Protection of the Enviroment
PRELIMINARIES
Clause 4.19 - Electricity, Water and Gas
PRELIMINARIES
Clause 4.20 - Employer's Equipment and Free-Issue Material
PRELIMINARIES
Clause 4.21 - Progress Reports
PRELIMINARIES
Clause 4.22 - Security of the Site
PRELIMINARIES
Clause 4.23 - Contractor's Operations on Site
PRELIMINARIES
Clause 4.24 - Fossils
PRELIMINARIES
5.0 - NOMINATED SUBCONTRACTORS
PRELIMINARIES
- Definition of "nominated Subcontractor"
PRELIMINARIES
Clause 5.2 - Objection to Nomination
PRELIMINARIES
Clause 5.3 - Payments to nominated Subcontractors
PRELIMINARIES
Clause 5.4 - Evidence of Payments
PRELIMINARIES
6.0 - STAFF AND LABOUR
1 7 54 Item 1 0.00 0.00 0.00
1 7 55 Item 1 0.00 0.00 0.00
1 7 56 Item 1 0.00 0.00 0.00
1 7 57 Item 1 0.00 0.00 0.00
1 7 58 Item 1 0.00 0.00 0.00
1 7 59 Item 1 0.00 0.00 0.00
1 7 60 Item 1 0.00 0.00 0.00
1 7 61 Item 1 0.00 0.00 0.00
1 7 62 Item 1 0.00 0.00 0.00
1 7 63 Item 1 0.00 0.00 0.00
1 7 64 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
1 7 65 Item 1 0.00 0.00 0.00
1 8 66 Item 1 0.00 0.00 0.00
1 8 67 Item 1 0.00 0.00 0.00
1 8 68 Item 1 0.00 0.00 0.00
1 8 69 Item 1 0.00 0.00 0.00
1 8 70 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 6.1 - Engagement of Staff and Labour
PRELIMINARIES
Clause 6.2 - Rates of Wages and Conditions of Labour
PRELIMINARIES
Clause 6.3 - Persons in the Service of Employer
PRELIMINARIES
Clause 6.4 - Labour Laws
PRELIMINARIES
Clause 6.5 - Working Hours
PRELIMINARIES
Clause 6.6 - Facilities for Staff and Labour
PRELIMINARIES
Clause 6.7 - Health and Safety
PRELIMINARIES
Clause 6.8 - Contractor's Superintendence
PRELIMINARIES
Clause 6.9 - Contractor's Personnel
PRELIMINARIES
Clause 6.10 - Records of Contractor's Personnel and Equipment
PRELIMINARIES
Clause 6.11 - Disorderly Conduct
PRELIMINARIES
7.0 - PLANT, MATERIALS AND WORKMANSHIP
PRELIMINARIES
Clause 7.1 - Manner of Execution
PRELIMINARIES
Clause 7.2 - Samples
PRELIMINARIES
Clause 7.3 - Inspection
PRELIMINARIES
Clause 7.4 - Testing
PRELIMINARIES
Clause 7.5 - Rejection
PRELIMINARIES
Clause 7.6 - Remedial Work
1 8 71 Item 1 0.00 0.00 0.00
1 8 72 Item 1 0.00 0.00 0.00
1 8 0.00 0.00 0.00
1 8 73 Item 1 0.00 0.00 0.00
1 8 74 Item 1 0.00 0.00 0.00
1 8 75 Item 1 0.00 0.00 0.00
1 8 76 Item 1 0.00 0.00 0.00
1 8 77 Item 1 0.00 0.00 0.00
1 8 78 Item 1 0.00 0.00 0.00
1 9 79 Item 1 0.00 0.00 0.00
1 9 80 Item 1 0.00 0.00 0.00
1 9 81 Item 1 0.00 0.00 0.00
1 9 82 Item 1 0.00 0.00 0.00
1 9 83 Item 1 0.00 0.00 0.00
1 9 84 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 85 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 7.7 - Ownership of Plant and Material
PRELIMINARIES
Clause 7.8 - Royalties
PRELIMINARIES
8.0 - COMMENCEMENT, DELAYS AND SUSPENSION
PRELIMINARIES
Clause 8.1 - Commencement of Works
PRELIMINARIES
Clause 8.2 - Time for Completion
PRELIMINARIES
- Programme
PRELIMINARIES
Clause 8.4 - Extension of Time for Completion
PRELIMINARIES
Clause 8.5 - Delays cuased by Authorities
PRELIMINARIES
Clause 8.6 - Rate of Progress
PRELIMINARIES
Clause 8.7 - Delay Damages
PRELIMINARIES
Clause 8.8 - Suspension of Work
PRELIMINARIES
Clause 8.9 - Consequences of Suspension
PRELIMINARIES
Clause 8.10 - Payment for Plant and Materials in Event of Suspension
PRELIMINARIES
Clause 8.11 - Prolonged Suspension
PRELIMINARIES
Clause 8.12 - Resumption of Work
PRELIMINARIES
9.0 - TESTS ON COMPLETION
PRELIMINARIES
- Contractor's Obligation
1 9 86 Item 1 0.00 0.00 0.00
1 9 87 Item 1 0.00 0.00 0.00
1 9 88 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 89 Item 1 0.00 0.00 0.00
1 9 90 Item 1 0.00 0.00 0.00
1 10 91 Item 1 0.00 0.00 0.00
1 10 92 Item 1 0.00 0.00 0.00
1 10 0.00 0.00 0.00
1 10 93 Item 1 0.00 0.00 0.00
1 10 94 Item 1 0.00 0.00 0.00
1 10 95 Item 1 0.00 0.00 0.00
1 10 96 Item 1 0.00 0.00 0.00
1 10 97 Item 1 0.00 0.00 0.00
1 10 98 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 9.2 - Delayed Tests
PRELIMINARIES
Clause 9.3 - Retesting
PRELIMINARIES
Clause 9.4 - Failure to Pass Tests on Completion
PRELIMINARIES
10.0 - EMPLOYER'S TAKING OVER
PRELIMINARIES
Clause 10.1 - Taking Over of the Works and Sections
PRELIMINARIES
Clause 10.2 - Taking Over of Parts of the Works
PRELIMINARIES
Clause 10.3 - Interference with Tests on Completion
PRELIMINARIES
Clause 10.4 - Surfaces Requiring Reinstatement
PRELIMINARIES
11.0 - DEFECTS LIABILITY
PRELIMINARIES
Clause 11.1 - Completion of Outstandin g Work and Remedying Defects
PRELIMINARIES
Clause 11.2 - Cost of Remedying Defects
PRELIMINARIES
Clause 11.3 - Extension of Defects Notification Period
PRELIMINARIES
Clause 11.4 - Failure to Remedy Defects
PRELIMINARIES
Clause 11.5 - Removal of Defective Work
PRELIMINARIES
Clause 11.6 - Further Tests
1 10 99 Item 1 0.00 0.00 0.00
1 10 100 Item 1 0.00 0.00 0.00
1 10 101 Item 1 0.00 0.00 0.00
1 10 102 Item 1 0.00 0.00 0.00
1 10 103 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 104 Item 1 0.00 0.00 0.00
1 11 105 Item 1 0.00 0.00 0.00
1 11 106 Item 1 0.00 0.00 0.00
1 11 107 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 108 Item 1 0.00 0.00 0.00
1 11 109 Item 1 0.00 0.00 0.00
1 11 110 Item 1 0.00 0.00 0.00
1 11 111 Item 1 0.00 0.00 0.00
1 11 112 Item 1 0.00 0.00 0.00
1 11 113 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 11.7 - Right of Access
PRELIMINARIES
Clause 11.8 - Contractor to Search
PRELIMINARIES
Clause 11.9 - Performance Certificate
PRELIMINARIES
Clause 11.10 - Unfulfilled Obligations
PRELIMINARIES
Clause 11.11 - Clearance of Site
PRELIMINARIES
12.0 - MEASUREMENT AND EVALUATION LIABILITY
PRELIMINARIES
Clause 12.1 - Works to be Measured
PRELIMINARIES
Clause 12.2 - Method of Measurement
PRELIMINARIES
Clause 12.3 - Evaluation
PRELIMINARIES
Clause 12.4 - Ommisions
PRELIMINARIES
13.0 - VARIATIONS AND ADJUSTMENTS
PRELIMINARIES
Clause 13.1 - Right to Vary
PRELIMINARIES
13.2 - Value Engineering
PRELIMINARIES
Clause 13.3 - Variation Procedure
PRELIMINARIES
Clause 13.4 - Payment in Applicable Currencies
PRELIMINARIES
Clause 13.5 - Provisional Sums
PRELIMINARIES
Clause 13.6 - Daywork
1 11 114 Item 1 0.00 0.00 0.00
1 11 115 Item 1 0.00 0.00 0.00
1 12 0.00 0.00 0.00
1 12 116 Item 1 0.00 0.00 0.00
1 12 117 Item 1 0.00 0.00 0.00
1 12 118 Item 1 0.00 0.00 0.00
1 12 119 Item 1 0.00 0.00 0.00
1 12 120 Item 1 0.00 0.00 0.00
1 12 121 Item 1 0.00 0.00 0.00
1 12 122 Item 1 0.00 0.00 0.00
1 12 123 Item 1 0.00 0.00 0.00
1 12 124 Item 1 0.00 0.00 0.00
1 12 125 Item 1 0.00 0.00 0.00
1 12 126 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 13.7 - Adjustments for Changes in Legislation
PRELIMINARIES
Clause 13.8 - Adjustments for Changes in Cost
PRELIMINARIES
14.0 - CONTRACT PRICE AND PAYMENTS
PRELIMINARIES
Clause 14.1 - The Contract Price
PRELIMINARIES
Clause 14.2 - Advance Payment
PRELIMINARIES
Clause 14.3 - Application for Iterim Payment Certificates
PRELIMINARIES
Clause 14.4 - Schedule of Payments
PRELIMINARIES
Clause 14.5 - Plant and Materials Intended for the Works
PRELIMINARIES
Clause 14.6 - Issue of Interim Payment Certificates
PRELIMINARIES
Clause 14.7 - Payment
PRELIMINARIES
Clause 14.8 - Delayed Payment
PRELIMINARIES
Clause 14.9 - Payment of Retention Money
PRELIMINARIES
Clause 14.10 - Statement at Completion
PRELIMINARIES
Clause 14.11 - Application for Final Payment Certificate
1 12 127 Item 1 0.00 0.00 0.00
1 12 128 Item 1 0.00 0.00 0.00
1 13 129 Item 1 0.00 0.00 0.00
1 13 130 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 131 Item 1 0.00 0.00 0.00
1 13 132 Item 1 0.00 0.00 0.00
1 13 133 Item 1 0.00 0.00 0.00
1 13 134 Item 1 0.00 0.00 0.00
1 13 135 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 136 Item 1 0.00 0.00 0.00
1 13 137 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 14.12 - Discharge
PRELIMINARIES
Clause 14.13 - Issue of Final Payment Certificate
PRELIMINARIES
Clause 14.14 - Cessation of Employer's Liability
PRELIMINARIES
Clause 14.15 - Currencies of Payment
PRELIMINARIES
15.0 - TERMINATION BY EMPLOYER
PRELIMINARIES
Clause 15.1 - Notice to Correct
PRELIMINARIES
Clause 15.2 - Termination by Employer
PRELIMINARIES
15.3 - Valuation at Date of Termination
PRELIMINARIES
15.4 - Payment after Termination
PRELIMINARIES
15.5 - Empoyer's Entitlement to Termination
PRELIMINARIES
16.0 - SUPSENSION AND TERMINATION BY CONTRACTOR
PRELIMINARIES
Clause 16.1 - Contractor's Entitlement to Suspend Work
PRELIMINARIES
Clause 16.2 - Termination by Contractor
1 13 138 Item 1 0.00 0.00 0.00
1 13 139 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 140 Item 1 0.00 0.00 0.00
1 14 141 Item 1 0.00 0.00 0.00
1 14 142 Item 1 0.00 0.00 0.00
1 14 143 Item 1 0.00 0.00 0.00
1 14 144 Item 1 0.00 0.00 0.00
1 14 145 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 146 Item 1 0.00 0.00 0.00
1 14 147 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 16.3 - Cessasion of Work and Removal of Contractor's Equipment
PRELIMINARIES
16.4 - Payment on Termination
PRELIMINARIES
17.0 - RISK AND RESPONSIBILITY
PRELIMINARIES
Clause 17.1 - Indemnities
PRELIMINARIES
Clause 17.2 - Contractor's Care of the Works
PRELIMINARIES
Clause 17.3 - Employer's Risks
PRELIMINARIES
Clause 17.4 - Consequences of Employer's Risks
PRELIMINARIES
Clause 17.5 - Intellectual and Industrial Property Rights
PRELIMINARIES
Clause 17.6 - Limitation of Liability
PRELIMINARIES
18.0 - INSURANCE
PRELIMINARIES
Clause 18.1 - General Requierments for Insurances
PRELIMINARIES
Clause 18.2 - Insurance for Works and Contractor's Equipment
1 14 148 Item 1 0.00 0.00 0.00
1 14 149 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 150 Item 1 0.00 0.00 0.00
1 14 151 Item 1 0.00 0.00 0.00
1 14 152 Item 1 0.00 0.00 0.00
1 15 153 Item 1 0.00 0.00 0.00
1 15 154 Item 1 0.00 0.00 0.00
1 15 155 Item 1 0.00 0.00 0.00
1 15 156 Item 1 0.00 0.00 0.00
1 15 0.00 0.00 0.00
1 15 157 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 18.3 - Insurance against Injury to Persons and Damage to Property
PRELIMINARIES
Clause 18.4 - Insurance for Contractor's Personnel
PRELIMINARIES
19.0 - FORCE MAJEURE
PRELIMINARIES
Clause 19.1 - Definition of Force Majuere
PRELIMINARIES
Clause 19.2 - Notice of Force Majuere
PRELIMINARIES
Clause 19.3 - Duty to Minimise Delay
PRELIMINARIES
Clause 19.4 - Consequences of Force Majuere
PRELIMINARIES
Clause 19.5 - Force Majuere Affecting Subcontractor
PRELIMINARIES
Clause 19.6 - Optional Termination, Payment and Release
PRELIMINARIES
Clause 19.7 - Release from Performance under the Law
PRELIMINARIES
20.0 - CLAIMS, DISPUTES AND ARBITRATION
PRELIMINARIES
Clause 20.1 - Contractors Claim
1 15 158 Item 1 0.00 0.00 0.00
1 15 159 Item 1 0.00 0.00 0.00
1 15 160 Item 1 0.00 0.00 0.00
1 15 161 Item 1 0.00 0.00 0.00
1 15 162 Item 1 0.00 0.00 0.00
1 15 163 Item 1 0.00 0.00 0.00
1 15 164 Item 1 0.00 0.00 0.00
1 16 0.00 0.00 0.00
PRELIMINARIES
Clause 20.2 - Appointment of the Dispute Adjudication Board
PRELIMINARIES
Clause 20.3 - Failire to Agree Dispute Adjudication Board
PRELIMINARIES
Clause 20.4 - Obtaining Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.5 - Amicable Settlement
PRELIMINARIES
Clause 20.6 - Arbitration
PRELIMINARIES
Clause 20.7 - Failure to Comply Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.8 - Expiry of Dispute Adjudication Board's Appointment
PRELIMINARIES
SECTION B - MODEL PRELIMINARIES
1 16 0.00 0.00 0.00
1 16 0.00 0.00 0.00
1 16 165 Item 1 0.00 0.00 0.00
1 16 166 Item 1 0.00 0.00 0.00
PRELIMINARIES
Model Preliminary Document can be purchased from the Institute of Namibian Quantity Surveyor's offices situated at c/o Hugo Hahn St and Nelson Mandela Ave, Klein Windhoek, Windhoek during week days from 8H00 to 12H00.
All references in this document ma
PRELIMINARIES
B1: Supplementary Documentation
PRELIMINARIES
B1.1: Bills of Quantities
These Bills of Quantities contain pages and annexures as indexed on the flyleaf.
These Bills of Quantities are consecutively numbered and the Tenderer is required to check the number of pages and should any be found missing
PRELIMINARIES
B1.2: Provisional Bills of Quantities
1 16 167 Item 1 0.00 0.00 0.00
1 17 168 Item 1 0.00 0.00 0.00
1 17 169 Item 1 0.00 0.00 0.00
1 17 170 Item 1 0.00 0.00 0.00
1 17 171 Item 1 0.00 0.00 0.00
1 17 172 Item 1 0.00 0.00 0.00
1 17 173 Item 1 0.00 0.00 0.00
1 17 174 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.3: Availability of Construction Documentation for contracts based on Provisional Bills of Quantities
PRELIMINARIES
B1.4: Name of Architect, Quantity Surveyor and Specialist Consultants
Refer to the Appedix To Tender
PRELIMINARIES
B1.5: Lodging and Scrutiny of priced Bills of Quantities.
These Bills of Quantities must be extended in black ink.
PRELIMINARIES
B1.6: Meaning of Words
PRELIMINARIES
B1.7: Performance Guarantee by Contractor
PRELIMINARIES
B1.8: Payment Guarantee by Employer
PRELIMINARIES
B1.9: Waiver of Contractor's Lien
PRELIMINARIES
B1.10: Signing powers
1 17 175 Item 1 0.00 0.00 0.00
1 17 176 Item 1 0.00 0.00 0.00
1 18 B2 The Site 0.00 0.00 0.00
1 18 177 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.11: Tenders
Notwithstanding anything contained in this clause, tenders shall be valid for a period as stipulated in the separate Bid Invitation Documents, from the closing date of tenders.
The Employer reserves the right to correct any arithmetic
PRELIMINARIES
B1.12: Inspection of Documents
PRELIMINARIES
PRELIMINARIES
B2.1: Site and Bounderies
The sites will be as indicated on the site plans in the Bidding Documents.
1 18 178 Item 1 0.00 0.00 0.00
1 18 179 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.2: Area of the Works
The Area of the Works to be occupied by the Contractor, any restriction on the area and the limit of access or exit will be pointed out to the Contractor by the Engineer on handing over of the Site.
PRELIMINARIES
B2.3: Boundary Beacons, setting-out pegs and master datum
The Contractor shall notify the Engineer if any encroachments of adjoining foundations, buildings, structures, pavements, etc., exist so that the necessary arrangements can be made for the rect
1 18 180 Item 1 0.00 0.00 0.00
1 18 181 Item 1 0.00 0.00 0.00
1 18 182 Item 1 0.00 0.00 0.00
1 18 183 Item 1 0.00 0.00 0.00
1 19 184 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.4: Site soil investigation
No site soil investigation report is available and the Tenderer is advised to inspect the site to ascertain the exact nature of the ground and report to the Engineer.
PRELIMINARIES
B2.5 : Viewing of the Site
No claims for extras arising from the Contractor having failed to comply with this Clause will be entertained.
PRELIMINARIES
B2.6: Existing premises occupied
PRELIMINARIES
B2.7: Dimensional accuracy of work executed under the previous contract
PRELIMINARIES
B2.8: Patent Defects in work executed under the previous contract
1 19 185 Item 1 0.00 0.00 0.00
1 19 186 Item 1 0.00 0.00 0.00
1 19 187 Item 1 0.00 0.00 0.00
1 19 188 Item 1 0.00 0.00 0.00
1 19 189 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 190 Item 1 0.00 0.00 0.00
1 19 191 Item 1 0.00 0.00 0.00
1 19 192 Item 1 0.00 0.00 0.00
1 19 193 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 194 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.9: Existing known services
Existing services and points of connection are shown on the Site plan or will be pointed out on the Site by the Engineer.
PRELIMINARIES
B2.10: Unknown Services
PRELIMINARIES
B2.11: Protection of trees
PRELIMINARIES
B2.12: Articles of Value
PRELIMINARIES
B2.13: Inspection of nearby properties etc.
PRELIMINARIES
B3 Management of Contract
PRELIMINARIES
B3.1: Management of Works
PRELIMINARIES
B3.2: Programming of The Works
The Contract shall be programmed by the Contractor in accordance with Alternative A
PRELIMINARIES
B3.3: Progress Meetings
PRELIMINARIES
B3.4: Technical Meetings
PRELIMINARIES
B4: Materials and Workmanship
PRELIMINARIES
B4.1: Samples of materials
1 20 195 Item 1 0.00 0.00 0.00
1 20 196 Item 1 0.00 0.00 0.00
1 20 0.00 0.00 0.00
1 20 197 Item 1 0.00 0.00 0.00
1 20 198 Item 1 0.00 0.00 0.00
1 20 199 Item 1 0.00 0.00 0.00
1 20 200 Item 1 0.00 0.00 0.00
1 20 201 Item 1 0.00 0.00 0.00
1 20 202 Item 1 0.00 0.00 0.00
PRELIMINARIES
B4.2: Samples of workmanship and mockups
PRELIMINARIES
B4.3: Ordering of materials
PRELIMINARIES
B5: Temporary Works and Plant
PRELIMINARIES
B5.1: Deposits and Fees
PRELIMINARIES
B5.2: Enclosure of Works
PRELIMINARIES
B5.3: Pavement crossings and parking meters
PRELIMINARIES
B5.4: Advertising
PRELIMINARIES
B5.5: Plant and Equipment
PRELIMINARIES
B5.6: Special Scaffolding
No special scaffolding is measured as these Bills of Quantities are based on the Sixth edition of the Standard System for Measuring Building Work.
1 20 203 Item 1 0.00 0.00 0.00
1 20 204 Item 1 0.00 0.00 0.00
1 20 205 Item 1 0.00 0.00 0.00
1 21 206 Item 1 0.00 0.00 0.00
1 21 207 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 208 Item 1 0.00 0.00 0.00
PRELIMINARIES
B5.7: Contractor's Offices and Sheds
Under NO circumstances may any of the buildings at any stage be used for temporary accommodation for workers, contractor's offices or the storage of materials.
PRELIMINARIES
B5.8: Offices
PRELIMINARIES
B5.9: Office of the Clerk of Works
PRELIMINARIES
B5.10: Main Noticeboard
PRELIMINARIES
B5.11: Subcontractors' Noticeboard
PRELIMINARIES
B6: Temporary Services
PRELIMINARIES
B6.1: Water
The contractor shall provide water for The Works in accordance with Alternative A
1 21 209 Item 1 0.00 0.00 0.00
1 21 210 Item 1 0.00 0.00 0.00
1 21 211 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 212 Item 1 0.00 0.00 0.00
PRELIMINARIES
B6.2: Electricity and Lighting
The contractor shall provide electricity and lighting for The Works in accordance with Alternative A
PRELIMINARIES
B6.3: Telephones
The contractor shall provide telephones for the Works in accordance with Alternative A
PRELIMINARIES
B6.4: Toilets
The contractor shall provide toilets for The Works in accordance with Alternative A
PRELIMINARIES
B7: Prime Cost and Provisional Amounts
PRELIMINARIES
B7.1: Cash Discount
All Prime Cost and Provisional Sums are net and do not include a cash discount, nor will the Contractor be allowed or entitled to a cash discount.
1 21 213 Item 1 0.00 0.00 0.00
1 22 214 Item 1 0.00 0.00 0.00
1 22 215 Item 1 0.00 0.00 0.00
1 22 216 Item 1 0.00 0.00 0.00
1 22 0.00 0.00 0.00
1 22 217 Item 1 0.00 0.00 0.00
1 22 218 N/A 1 0.00 0.00 0.00
PRELIMINARIES
B7.2: Taking delivery and fixing of prime cost items
PRELIMINARIES
B7.3: Nominated or Selected Subcontract Documents
PRELIMINARIES
B7.4: Attendance on Nominated or Selected Subcontractors
PRELIMINARIES
B7.5: Fuel, power and water for commissioning of mechanical and other specialised installations
PRELIMINARIES
B8: Financial Aspects
PRELIMINARIES
B8.1: Sales Taxes
Delete the whole of this clause and replace with the following:
B8.1: Taxes, etc.
Provision is made in the separate Bid Invitation Documents for the inclusion of Value Added Tax (VAT) at 15%. The Contractor shall price these B
PRELIMINARIES
B8.2: Contract price adjusment provisions
1 22 219 Item 1 0.00 0.00 0.00
1 22 220 Item 1 0.00 0.00 0.00
1 23 221 Item 1 0.00 0.00 0.00
1 23 222 N/A 1 0.00 0.00 0.00
1 23 223 Item 1 0.00 0.00 0.00
PRELIMINARIES
B8.3: Payment of Preliminaries
Payment of Preliminaries will be calculated from the priced items within the Preliminaries in accordance with Alternative B
In addition to the exclusions mentioned in the third paragraph of this clause it shall be deem
PRELIMINARIES
B8.4: Adjustment of Preliminaries
The Adjustment of Preliminaries will be on the basis of fixed price, value related and time related items in accordance with Method 3.
In addition to the exclusions mentioned in the this paragraph of this clause it
PRELIMINARIES
B8.5: Certificate payment projection
PRELIMINARIES
B8.6: Dayworks
PRELIMINARIES
B8.7: Information supplied by Contractor
1 23 0.00 0.00 0.00
1 23 224 Item 1 0.00 0.00 0.00
1 23 225 Item 1 0.00 0.00 0.00
1 23 226 Item 1 0.00 0.00 0.00
1 23 227 Item 1 0.00 0.00 0.00
1 23 228 Item 1 0.00 0.00 0.00
1 23 229 Item 1 0.00 0.00 0.00
1 23 230 Item 1 0.00 0.00 0.00
1 23 231 Item 1 0.00 0.00 0.00
1 24 232 Item 1 0.00 0.00 0.00
1 24 233 Item 1 0.00 0.00 0.00
1 24 0.00 0.00 0.00
1 24 234 Item 1 0.00 0.00 0.00
PRELIMINARIES
B9: General
PRELIMINARIES
B9.1: Protection
PRELIMINARIES
B9.2: Protection of existing and/or partially occupied works.
PRELIMINARIES
B9.3: Safety
PRELIMINARIES
B9.4: Site security
PRELIMINARIES
B9.5: Notice before covering work
PRELIMINARIES
B9.6: Disturbance
PRELIMINARIES
B9.7: Clearing and cleaning
PRELIMINARIES
B9.8: Vermin
PRELIMINARIES
B9.9: Overhand Work
PRELIMINARIES
B9.10: Jobbing
PRELIMINARIES
SECTION C - SPECIFIC PRELIMINARIES
PRELIMINARIES
Site instructions
Instructions issued on site are to be recorded in triplicate in a site instruction book which is to be maintained on site by the contractor
1 24 235 Item 1 0.00 0.00 0.00
1 24 236 Item 1 0.00 0.00 0.00
PRELIMINARIES
Warranties for material and workmanship
Where warranties for materials and/or workmanship are called for, the contractor shall obtain a written warranty, addressed to the employer, from the firm supplying the materials and/or doing the work and shall d
PRELIMINARIES
Co-operation of contractor for cost management
It is specifically agreed that the contractor accepts the obligation of assisting the engineer in implementing proper cost management. The contractor will be advised by the engineer of all cost management
1 25 237 Item 1 0.00 0.00 0.00
1 25 238 Item 1 0.00 0.00 0.00
PRELIMINARIES
Testing of windows for watertightness
Each window shall be tested for watertightness with water sprayed on using adequate pressure. If in the opinion of the engineer, the pressure proves to be inadequate, then the pressure shall be boosted by means of
PRELIMINARIES
Revenue Stamps
The Contractor must allow for and provide all necessary revenue stamps require.
1 25 239 Item 1 0.00 0.00 0.00
1 25 240 Item 1 0.00 0.00 0.00
PRELIMINARIES
Proprietary Branded Products.
The Contractor shall take delivery of, handle, store, use, apply and/or fix all proprietary branded products in strict accordance with the manufacturers' instructions after consultation with the manufacturer's authorised r
PRELIMINARIES
Non-Cession of Monies
The Contractor shall not cede nor assign his rights or claims to any monies due or to become due under this contract.
1 25 241 Item 1 0.00 0.00 0.00
1 25 242 Item 1 0.00 0.00 0.00
PRELIMINARIES
As Built Drawings
The position of construction breaks and the extent of individual concrete pours are to be recorded by the Contractor on the Structural Engineer's drawings and are to be submitted to the Architect and the Structural Engineer for their
PRELIMINARIES
Social Security
The contractor shall provide for and effect Social Security for all his/her employees on the works in respect of the Social Security Act and will also instruct all his sub-contractors to do the same.
1 26 243 Item 1 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
PRELIMINARIES
nt of Namibian People
The contractor is encouraged to employ Namibian citizens for skilled and semi skilled artisans and employ unskilled labour from the area of interventions.
All Namibian skilled artisans and Namibian unskilled employees a
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Making good damaged work:
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 1 m³ 65 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 2 No. 5 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
Steps and pavers
ALTERATIONS
Taking out and removing doors, screen gates, etc including thresholds, sills, etc in one brick walls including making good cement plaster and paintwork on both sides:
ALTERATIONS
Steel screen gate and frame 813 x 2,031mm high overall from one brickwall.
2 32 3 No. 10 0.00 0.00 0.00
2 32 4 No. 40 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 5 No. 2 0.00 0.00 0.00
2 32 6 No. 12 0.00 0.00 0.00
2 32 7 No. 3 0.00 0.00 0.00
2 32 8 No. 6 0.00 0.00 0.00
2 32 9 No. 63 0.00 0.00 0.00
ALTERATIONS
Timber single door 813 x 2,031mm high overall from one brickwall.
ALTERATIONS
single door 813 x 2,031mm high overall from one brickwall.
ALTERATIONS
Taking out and removing doors, windows, etc from one brickwall (windows to be set aside for re-use):
ALTERATIONS
Glazed steel window 550 x 1,000m high from one brick wall.
ALTERATIONS
Glazed steel windows 1,000 x 600mm high from one brick wall.
ALTERATIONS
Glazed steel windows 1,000 x 1,000mm high from one brick wall.
ALTERATIONS
Glazed steel window 1,470 x 1,000m high from one brick wall.
ALTERATIONS
Glazed steel window 1,500 x 600m high from one brick wall.
2 32 10 No. 70 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 11 m² 316 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 12 m² 228 0.00 0.00 0.00
2 33 13 m 656 0.00 0.00 0.00
2 33 14 m 656 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 15 No. 40 0.00 0.00 0.00
2 33 16 No. 9 0.00 0.00 0.00
ALTERATIONS
Glazed steel window 1,500 x 900m high from one brick wall.
ALTERATIONS
Taking down and removing roofs, floors, panelling, ceilings, partitions, etc:
ALTERATIONS
Nailed up Celotex ceilings.
ALTERATIONS
Taking out and removing sundry joinery work:
ALTERATIONS
Vinyl tile floor covering including preparing screed for new vinyl floor covering.
ALTERATIONS
Timber cornices from brickwork.
ALTERATIONS
Timber skirtings from brickwork.
ALTERATIONS
Taking out and removing ironmongery:
ALTERATIONS
Mortice lock and striking plate from steel door and steel frame.
ALTERATIONS
lock and striking plate from timber door and steel frame.
2 33 0.00 0.00 0.00
2 33 17 m² 55 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 18 m² 1036 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 19 No. 10 0.00 0.00 0.00
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and preparing surfaces for new screeds, plaster, etc:
ALTERATIONS
Plasters from walls or columns in patches.
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and bush hummering surfaces to receive new screeds, plaster, etc:
ALTERATIONS
50mm Screed from floors (internal and external).
ALTERATIONS
Taking out and removing piping, sanitary fittings, etc including disconnecting piping from fittings and making good floor and wall finishes (making good tiling and paintwork elsewhere):
ALTERATIONS
Broken polyethylene rotation pedestal WC pot.
2 33 20 No. 10 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 21 m² 2 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 22 m 27 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 23 m² 10 0.00 0.00 0.00
2 34 24 m² 30 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
ALTERATIONS
Broken viteous china WHB
ALTERATIONS
Taking out and removing broken glass from windows/door panes and mirrors:
ALTERATIONS
Broken glass from steel windows including cleaning out rebates and preparing for new glass.
ALTERATIONS
Charts and learning material on walls
ALTERATIONS
Allow for removal of learning charts and material ( and putting back thereafter), from walls and pinning boards so as to expose surfaces to be painted.
ALTERATIONS
BUILDING UP OPENINGS
ALTERATIONS
Brickwork in cement bricks [7 Mpa] in class I mortar in building up:
ALTERATIONS
Half brick walls.
ALTERATIONS
One brick walls.
ALTERATIONS
MAKING GOOD OF FINISHES, ETC.
ALTERATIONS
Making good existing metal ceilings:
2 34 25 m² 1328 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 26 m² 62 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 27 m² 27 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 28 m² 74 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Clean ceilings from any organic matters and dirts, apply disinfenctants and pets poison in the roof space before installing ceiling, make good on completion, taking utmost care not to damage the ceilings.
ALTERATIONS
Making good 300 x 300mm ceramic floor tiles:
ALTERATIONS
Floors in patches.
ALTERATIONS
Making good external bagged finish to cement plaster:
ALTERATIONS
Walls in patches.
ALTERATIONS
Making good pinning board surface, clean and re-glue:
ALTERATIONS
'Flortime' pinning boardmodel 2300 code: '2309', size 2,400 x 1,200mm.
ALTERATIONS
REMEDIAL WORKS
ALTERATIONS
Roof timber rafters:
2 35 29 m 332 0.00 0.00 0.00
2 35 30 m 1526 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Replace broken or missing eaves purlin with 50 x 76mm wrot softwood purlin, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
Reinforcing the exiting timber tie beam size114 x 38mm wrot softwood complete with rafter feets, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
ROOF LEAKS REPAIRS AND SEALING
ALTERATIONS
Inspect, re-fastened, replace missing screws, and seal roof screws, gaps, overlaps, holes, flashings, etc with 'Klodek Glass fibre fabric with two coats of sealant' where necessary to leave in perfect waterproof condition on completion:
2 35 31 m² 1328 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 32 m² 591 0.00 0.00 0.00
2 35 33 m² 33 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
ALTERATIONS
On existing IBR roof covering.
ALTERATIONS
PLASTER REPAIRS
ALTERATIONS
Supplementary preambles:
ALTERATIONS
All plaster repair admixtures are to be applied strictly in accordance with the "abe Construction Chemicals" or similar approved requirements. Break out all loose and hollow plaster at least 20 mm wide all around loose plaster area, brush clean of all loo
ALTERATIONS
Prepare and apply 3 to 1 plaster admixture as described:
ALTERATIONS
On brick walls
ALTERATIONS
On narrow widths
ALTERATIONS
CRACK REPAIRS
ALTERATIONS
Supplemantary preamble:
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 34 On walls m 55 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 35 m 207 0.00 0.00 0.00
ALTERATIONS
Repair crack in plastered walls by hacking off existing plaster to 300mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'epidermix'/ 'mendell 90' or similar approved crack repair product, cover with 13mm c
ALTERATIONS
Repairs cracked plaster/ concrete surfaces as noted above:
ALTERATIONS
ALTERATIONS
Supplementary preamble:
ALTERATIONS
Repair crack in screeded floors by hacking off the existing screed to expose the concrete surface, 200mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'abe epidermix 344' or similar approved 'wet to dry'
ALTERATIONS
On concrete floors
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 1 m³ 78 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 2 Soft rock. m³ 5 0.00 0.00 0.00
2 38 3 Hard rock. m³ 1 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 4 m² 49 0.00 0.00 0.00
2 38 0.00 0.00 0.00
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKS
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
CARTING AWAY.
2 38 0.00 0.00 0.00
2 38 5 m³ 78 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 6 m³ 89 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Surface Preparation:
2 39 7 m² 259 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of natural ground and/or excavated surfaces to receive concrete surface beds, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum dens
EARTHWORKS
SOIL POISONING
EARTHWORKS
Approved brand of anti-termite soil poison mixed with weedkiller applied by a Registered Pest Control company and guaranteed against termite infestation for ten years, strictly according to manufacturer's instructions:
2 39 8 m² 259 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 1 m³ 213 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a power float:
2 41 2 m² 1417 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 3 m 1036 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 4 m 1036 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 5 m² 1771 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls and currents.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II) (CPAP Work Group No 111)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT (PROVISIONAL) (CPAP Work Group No 114)
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.SUPPLEMENTARY PREAMBLESBRICKWORKBrick reinforcements:
The brickwork reinforcements have been measured on every course in foundations brickworks, every third course in superstructure brickwork, and every course in the beamfilling brickwork.Sizes in descriptions:
Where sizes in descriptions are given in brick units, 'one brick' shall represent the length and 'half brick' the width of a brick.Hollow walls etc:
2 MASONRY 42 0.00 0.00 0.00 2 MASONRY 42 Pointing: 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
2 MASONRY 42 1 m 60 0.00 0.00 0.00
2 MASONRY 42 2 m 109 0.00 0.00 0.00
2 MASONRY 42 0.00 0.00 0.00
Descriptions of hollow walls shall be deemed to include leaving every fifth perpend of the bottom course of the external skin open as a weep hole.
Descriptions of recessed pointing to fair face brickwork and face brickwork shall be deemed to include square recessed, hollow recessed, weathered pointing, etc.BRICKWORK SUNDRIESBrickwork reinforcement:75mm Wide reinforcement built in horizontally.
150mm Wide reinforcement built in horizontally.Cement wash of 1:3 liquid cement and sand mixture applied with a brush, on previously cement washed surfaces:
2 MASONRY 42 3 m² 23 0.00 0.00 0.00
2 MASONRY 43 4 m² 223 0.00 0.00 0.00
2 MASONRY 43 0.00 0.00 0.00
2 MASONRY 43 5 m 16 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 1 m 196 0.00 0.00 0.00
2 45 SKIRTINGS 0.00 0.00 0.00
On concrete surfaces including removing fins, irregularities,etc.On brick surfaces.Prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
EAVES, VERGES, ETC
CARPENTRY AND JOINERY
Everite FC77 pressed fibre-cement:
CARPENTRY AND JOINERY
255 x 6mm Fascias and barge boards including gavanised steel H-profile jointing strips, screwed on to edges of existing timber trusses, rafters and purlins.
CARPENTRY AND JOINERY
2 45 0.00 0.00 0.00
2 45 2 m 180 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 0.00 0.00 0.00
2 45 3 m 787 0.00 0.00 0.00
2 45 4 m 850 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
75 x 22mm Skirting nailed.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought ' supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
METAL NAILED UP AND SCREW UP CEILINGS (CPAP Work Group No 126)
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm IBR profile metal ceiling in single lengths fixed to steel purlins/branderings or rails:
2 46 1 m² 316 0.00 0.00 0.00
2 46 2 No. 6 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 3 m 656 0.00 0.00 0.00
2 46 4 m 850 0.00 0.00 0.00
2 47 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
Ceilings including 30 x 30 x 3mm angle iron brandering at 1250mm centres running both ways.
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 3mm angle section framing covered with 0.5mm thick IBR profile sheeting fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
and broad flute closers 150mm girth to suit IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 1 No. 20 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 2 No. 6 0.00 0.00 0.00
2 47 3 No. 25 0.00 0.00 0.00
2 47 4 No. 26 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 5 No. 59 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 6 No. 20 0.00 0.00 0.00
IRONMONGERY
HINGES, FLOOR SPRING HINGES, BOLTS, PANIC BOLTS, ETC
IRONMONGERY
Flush barrel bolts in Solid or similar approved:
IRONMONGERY
500 x 32mm Satin chrome on brass flush barrel bolt with keep let into concrete.
IRONMONGERY
CATCHES, CABIN HOOKS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved standard window catch.
IRONMONGERY
Approved standard window stay.
IRONMONGERY
Approved standard window handle.
IRONMONGERY
LOCKS, HANDLES, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
'Blesbok' Art 460/312 four lever lockset complete with a pair of handles.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
2 47 7 No. 20 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 8 No. 4 0.00 0.00 0.00
2 48 9 No. 4 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 10 No. 20 0.00 0.00 0.00
2 48 Approved: 0.00 0.00 0.00
2 48 11 No. 2 0.00 0.00 0.00
2 48 SUNDRIES 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 12 No. 59 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
IRONMONGERY
Anodised aluminium plate with male or female symbol.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Chairman Industries or simmilar approved:
IRONMONGERY
DL2 Stainless steel side grab rail.
IRONMONGERY
SR2 Stainless steel backgrab rail.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved chromium plated toilet roll holder plugged
IRONMONGERY
IRONMONGERY
Chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Dclsa or similar approved:
IRONMONGERY
Code 140/83 satin chrome plated floor mounted door stop.
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or other approved:
2 48 13 No. 10 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
2 50 0.00 0.00 0.00
IRONMONGERY
Vitrex pinning board model 2300 code: 2309, 2,400 x 1,200mm high plugged.
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
The following in purpose made screens, frames, and gates, etc:
2 50 1 No. 5 0.00 0.00 0.00
2 50 2 No. 47 0.00 0.00 0.00
2 50 3 No. 118 0.00 0.00 0.00
2 50 4 m 23 0.00 0.00 0.00
2 50 5 Kg 31 0.00 0.00 0.00
2 51 0.00 0.00 0.00
METALWORK
Purpose made single security gate 813 x 2,032mm high overall, formed of 38 x 76 x 2.5mm mild steel square hollow section perimeter framing and two centre transoms forming top and bottom openings, each filled in with 'Mentix Flattex Code No. 341' expanded
METALWORK
Extra on 40 x 76 x 3mm hollow section framing for mitred angle intersection.
METALWORK
10mm Diameter loose bolt type expanding bolt as 'Rawbolt M10 75L', including mortice in brickwork and bolt up tight.
METALWORK
Purpose made gate frame consisting of 40 x 76 x 3mm square hollow section bolted to brickwork with bolts (bolts elsewhere measured).
METALWORK
10mm M10 Bolts.
METALWORK
Screens and gates:
2 51 6 No. 5 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 7 No. 39 0.00 0.00 0.00
2 51 8 No. 20 0.00 0.00 0.00
2 51 0.00 0.00 0.00
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard ' Wispeco' or similar approved chawl doors with back panel:
METALWORK
Door 813 x 2,032mm high complete with back panel with double rebated frame suitable for one brick wall.
METALWORK
Door 813 x 2,032mm high complete with back panel, hung to existing door frame.(Internal)
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
2 51 9 No. 20 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 SCREEDS 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 1 m² 1036 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 2 m 7 0.00 0.00 0.00
2 53 0.00 0.00 0.00
2 53 0.00 0.00 0.00
METALWORK
Frame for door 813 x 2,032mm high.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake or similar approved floor harderner applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.(internal and external)
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
2 53 3 m² 7 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 1 m 350 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
PLASTERING
On narrow widths.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.NOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.CERAMIC WALL TILING
Allow a PC sum of N$ 100.00 per m2 for purchasing and delivery of wall tiles fixed with adhesive to and including 20mm plaster bedding on walls and flush pointed with tinted waterproof jointing compound:
2 TILING 54 2 m² 27 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 0.00 0.00 0.00
2 TILING 54 3 m² 228 0.00 0.00 0.00
2 TILING 54 4 No. 21 0.00 0.00 0.00
2 TILING 54 5 m 350 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
On walls in isolated panels, splashbacks, etc.CERAMIC FLOOR TILING
300 x 300 x 6mm 'Dimo Top' full-body ceramic floor tiles fixed with adhesive on 25mm screed bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors and landings.Circular cutting.100mm high cut tile skirting.
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
SUPPLEMENTARY PREAMBLES
PLUMBING AND DRAINAGE
uPVC pressure pipes and fittings:
PLUMBING AND DRAINAGE
Pipes for water supply shall be of the class stated.
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Pipes of 40mm diameter and smaller shall be plain ended with solvent welded uPVC loose sockets and fittings.
PLUMBING AND DRAINAGE
Pipes of 50mm diameter and greater shall have sockets and spigots with push-in type integral rubber ring joints. Bends shall be uPVC and all other fittings shall be cast iron, all with similar push-in type joints.
PLUMBING AND DRAINAGE
Copper pipes:
PLUMBING AND DRAINAGE
Pipes shall be hard drawn and half-hard pipes of the class stated. Class 0 (thin walled hard drawn) pipes shall not be bent. Class 1 (thin walled half-hard), class 2 (half-hard) and class 3 (heavy walled half-hard) pipes shall only be bent with benders wi
PLUMBING AND DRAINAGE
Fixing of pipes:
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 55 Flush pans: 0.00 0.00 0.00
2 55 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Unless specifically otherwise stated, descriptions of pipes shall be deemed to include for fixing to walls etc. casting in, building in or suspending not exceeding 1m below suspension level
PLUMBING AND DRAINAGE
Reducing fittings:
PLUMBING AND DRAINAGE
Where fittings have reducing ends or branches they are described as 'reducing'. In the case of pipes with diameters not exceeding 60mm only the largest end or branch size is given. Should the Contractor wish to use other fittings and bushes or reducers he
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Flush pans shall have straight or side outlets and 'P' or 'S' traps as necessary.
PLUMBING AND DRAINAGE
Exposed concrete surfaces:
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Where no manufacturers' instructions exist pipes shall be laid in accordance with clauses 5.1 and 5.2 of each of the following: SABS 1200 L : Medium pressure pipelines LD : Sewers LE : Stormwater drainage Pipe trenches etc shall be backfilled in accord
PLUMBING AND DRAINAGE
Exposed surfaces of concrete stormwater channels, cover slabs, inspection eye marker slabs, gulley tops, cleaning eye tops, catchpits, inspection chambers, etc shall be finished smooth with plaster.
PLUMBING AND DRAINAGE
Excavations:
PLUMBING AND DRAINAGE
No claim for rock excavation will be entertained unless the Contractor has timeously notified the quantity surveyor thereof prior to backfilling.
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Laying, backfilling, bedding, etc of pipes:
PLUMBING AND DRAINAGE
Pipes shall be laid and bedded and trenches shall be carefully backfilled in accordance with manufacturers' instructions.
PLUMBING AND DRAINAGE
Stainless steel basins, sinks, wash troughs, urinals, etc:
PLUMBING AND DRAINAGE
Units shall have standard aprons on all exposed edges and tiling keys against walls where applicable.
PLUMBING AND DRAINAGE
Waste unions:
PLUMBING AND DRAINAGE
Descriptions of waste unions shall be deemed to include rubber or vulcanite plugs and chains fixed to fittings.
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
2 56 1 No. 10 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 2 No. 10 0.00 0.00 0.00
2 57 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover and 6l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china wash hand basins and pedestals:
PLUMBING AND DRAINAGE
510 x 405mm 'Hibiscus' white vitreous china lavatory basin (product code 7050) with two tapholes including integrated overflow and chainstay hole.
PLUMBING AND DRAINAGE
'Franke (t/a Citimetal)' grade 304 (18/10) 1,2mm thick stainless steel wash hand basins:
2 57 3 No. 5 0.00 0.00 0.00
2 57 Approved: 0.00 0.00 0.00
2 57 4 No. 10 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 5 No. 2 0.00 0.00 0.00
2 57 TRAPS ETC 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 6 No. 3 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Franke Oval A' wash hand basin size 420 x 340mm with pressed bowl , two tapholes , 100mm radius apron and 50mm high splashback, four times bolted to wall with M8 expansion bolts.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Polyethylene rotation pedestal and funnel V.I.D.P latrine with heavy duty seat and cover.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved waste unions etc:
PLUMBING AND DRAINAGE
75mm diameter Chrome plated shower/fountain grating (code 323).
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved traps etc:
PLUMBING AND DRAINAGE
40mm Rough brass medium seal sink 'P' trap, with FI outlet and cleaning eye (code VA2.360).
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 7 No. 2 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 8 m 12 0.00 0.00 0.00
2 57 9 m 7 0.00 0.00 0.00
2 58 10 m 7 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 11 No. 9 0.00 0.00 0.00
2 58 12 No. 3 0.00 0.00 0.00
2 58 13 No. 2 0.00 0.00 0.00
2 58 14 No. 5 0.00 0.00 0.00
2 58 15 32mm Tee. No. 4 0.00 0.00 0.00
2 58 16 No. 2 0.00 0.00 0.00
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' crutch handle, elbow action and lockshield bibtaps:
PLUMBING AND DRAINAGE
15mm Star Chrome plated foot operated hose bibtap with 20mm BSP thread on outlet (code 507-21).
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class 10 HDPE pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
63mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over HDPE pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
25mm Fittings.
PLUMBING AND DRAINAGE
32mm Reducer.
PLUMBING AND DRAINAGE
32mm Bend.
PLUMBING AND DRAINAGE
63mm Bend.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
32 x 32 x 25mm Reducing tee.
2 58 17 No. 1 0.00 0.00 0.00
2 58 18 No. 2 0.00 0.00 0.00
2 58 19 No. 3 0.00 0.00 0.00
2 58 20 No. 1 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 21 m 12 0.00 0.00 0.00
2 59 22 m 3 0.00 0.00 0.00
2 59 23 m 6 0.00 0.00 0.00
2 59 24 m 9 0.00 0.00 0.00
2 59 0.00 0.00 0.00
2 59 25 No. 6 0.00 0.00 0.00
2 59 26 No. 6 0.00 0.00 0.00
2 59 Sundries: 0.00 0.00 0.00
2 59 27 No. 12 0.00 0.00 0.00
PLUMBING AND DRAINAGE
63 x 32 x 25mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 63 x 32mm Reducing tee.
PLUMBING AND DRAINAGE
32mm Adaptor coupling.
PLUMBING AND DRAINAGE
63mm Adaptor coupling.
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Extra for connecting 22mm Coper pipe to 25mm HDPE pipe including all neccessary fittings, etc.
2 59 28 No. 4 0.00 0.00 0.00
2 59 29 Item 1 0.00 0.00 0.00
2 59 TESTING 0.00 0.00 0.00
2 59 Testing: 0.00 0.00 0.00
2 59 30 Item 1 0.00 0.00 0.00
2 59 31 Item 1 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 0.00 0.00 0.00
PLUMBING AND DRAINAGE
225 x 225mm Cast iron stopcock box including brick chamber below not exceeding 500mm deep internally.
PLUMBING AND DRAINAGE
excavate and connect the new 32mm HDPE water supply pipe to existing municipal water line including all labour and materials to execute the connection.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
Testing drainage pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
'Chubb'or similar approved:
2 60 32 No. 21 0.00 0.00 0.00
2 60 33 No. 22 0.00 0.00 0.00
2 60 34 No. 10 0.00 0.00 0.00
2 60 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Everyway' hose reel complete with 30m non-kinkable hose 20mm internal diameter plated stopcock, shut-off nozzle and wall bracket complete with 25mm diameter Saunders type A diaphragm isolated valve.
PLUMBING AND DRAINAGE
9kg Rechargeable dry chemical fire extinguisher complete with initial charge painted backing board plugged and screwed to plastered or tiled brick wall.
PLUMBING AND DRAINAGE
80 x 65mm Brass hydrant booster connection with cap and chain.
PLUMBING AND DRAINAGE
Fire hydrant pedestals:
2 60 35 No. 1 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 36 No. 120 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 37 No. 6 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 38 m 48 0.00 0.00 0.00
2 60 39 m 32 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Unreinforced concrete hydrant pedestals 900mm high cast around vertical pipe with bottom 300mm below ground, 300 x 300mm square at base and tapering to octagonal shaped top 200 x 200mm overall including necessary excavation, formwork and two coats of pain
PLUMBING AND DRAINAGE
WATER SUPPLIES TO FIRE APPLIANCES
PLUMBING AND DRAINAGE
Class 10 HDPE Type 4 pressure pipes:
PLUMBING AND DRAINAGE
32mm Fittings
PLUMBING AND DRAINAGE
Extra over class 10 HDPE Type 4 pressure pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
32mm Fittings.
PLUMBING AND DRAINAGE
Galvanised steel pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches not exceeding 1m.
PLUMBING AND DRAINAGE
32mm Pipes
2 61 0.00 0.00 0.00
2 61 40 No. 16 0.00 0.00 0.00
2 61 41 No. 10 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 42 No. 2 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 43 m 55 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra over galvanised steel pipes for steel Fittings:
PLUMBING AND DRAINAGE
25mm Fittings
PLUMBING AND DRAINAGE
32mm Fittings
PLUMBING AND DRAINAGE
FLUE PIPES ETC
PLUMBING AND DRAINAGE
1.2mm Galvanised sheet iron pipes etc:
PLUMBING AND DRAINAGE
200mm Diameter pipe 3450mm long fixed with holderbats to wall.
PLUMBING AND DRAINAGE
STORM WATER, SOIL WATER, AND WATER SYSTEMS REPAIRS
PLUMBING AND DRAINAGE
Clean, unblock, seal leakages and where applicable repair or replace part of or entire system or sub-systems to restore service:
PLUMBING AND DRAINAGE
Soilwater system, including inspection chambers, rodding eyes, vents, etc.
2 61 44 m 135 0.00 0.00 0.00
2 61 SLEEVES 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 45 No. 35 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 46 No. 35 0.00 0.00 0.00
2 63 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Water reticulation system, including fire protection sub-system, valves, connections, pipe replacement, etc
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Plastic sleeves for pipes not exceeding 100mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
PLUMBING AND DRAINAGE
Plastic sleeves for pipes exceeding 100mm and not exceeding 200mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 63 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 1 No. 1 0.00 0.00 0.00
2 63 2 No. 1 0.00 0.00 0.00
2 63 3 No. 1 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 4 2.5mm2 m 30 0.00 0.00 0.00
2 63 0.00 0.00 0.00
2 63 5 2.5mm². m 40 0.00 0.00 0.00
2 63 6 4mm². m 20 0.00 0.00 0.00
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for four future circuit breakers, legend card, circuit breakers, fuses, relay, volt-meter, ammeter, transformer, earth leakage unit, time switch, etc.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination..
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORK
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 7 No. 1 0.00 0.00 0.00
2 64 8 No. 2 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 9 No. 1 0.00 0.00 0.00
2 64 10 Item 1 0.00 0.00 0.00
2 64 11 No. 1 0.00 0.00 0.00
2 64 12 No. 3 0.00 0.00 0.00
2 64 13 No. 3 0.00 0.00 0.00
2 64 14 No. 2 0.00 0.00 0.00
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
ELECTRICAL RETICULATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
Install bird cage on siren
ELECTRICAL WORK
Decommission Electricity and make safe
ELECTRICAL WORK
Replace 1G1/2W switches weatherproof
ELECTRICAL WORK
Replace 1G1/2W switches
ELECTRICAL WORK
Replace SSO
ELECTRICAL WORK
Check and repair faulty power circuit including control gear and isulation,phase rotation,wiring
2 64 15 No. 1 0.00 0.00 0.00
2 64 16 1 0.00 0.00 0.00
2 65 17 m³ 28 0.00 0.00 0.00
2 65 18 Item 1 0.00 0.00 0.00
2 65 19 1 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 20 No. 2 0.00 0.00 0.00
ELECTRICAL WORK
Rewire fitting or circuit to distribution board, excluding existing wiring or control gear
ELECTRICAL WORK
Application for electrical power supply to local supply Authority
ELECTRICAL WORK
Excavation in hard rock conditions for cable trench (for new or existing cables, to 600mm deep)
ELECTRICAL WORK
Termination / make safe / remove existing cabling or wires not in use
ELECTRICAL WORK
Conceal / make good existing cabling or wires on surface by grouping multiple wires and tying down, conceal using metal trunking or conduits
ELECTRICAL WORK
Distrubution board:
ELECTRICAL WORK
Remove and replace door with latch, tray, and blank plates complete with 25mm pad lock
2 65 21 Item 1 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 22 No. 2 0.00 0.00 0.00
2 65 23 No. 34 0.00 0.00 0.00
2 65 24 No. 17 0.00 0.00 0.00
2 65 25 No. 6 0.00 0.00 0.00
2 65 26 No. 12 0.00 0.00 0.00
2 65 27 No. 10 0.00 0.00 0.00
ELECTRICAL WORK
Clean kiosk(s) complete, remove cobwebs and dust, check mechanical connections, latch mechanisms gaskets, replace if needed
ELECTRICAL WORK
Take delivery and install luminaries or equipment supplied by others complete with lamps, connections, etc:
ELECTRICAL WORK
Flood light, mast / wall mounted, with HID lamp-make good replace lamp
ELECTRICAL WORK
Replace 36W flourescent tubes
ELECTRICAL WORK
Replace 58W flourescent tubes
ELECTRICAL WORK
Replace 100W flourescent tubes
ELECTRICAL WORK
Replace external CFL's on external lights
ELECTRICAL WORK
Replace damaged 1500/1800mm with standard type C with 2 x 1200mm fittings complete with tubes
2 66 28 No. 4 0.00 0.00 0.00
2 66 29 No. 18 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 0.00 0.00 0.00
2 GLAZING 68 1 m² 2 0.00 0.00 0.00
ELECTRICAL WORK
Replace wall mounted light fitting as 'Lascon' B20 or similar approved and bulb 2PL9 bulbs (B)
ELECTRICAL WORK
Make good 36/58/100W fluorescent light fitting, including re-fitting, replace starter and / or transformer
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.GLAZING TO STEEL WITH PUTTY4mm Clear float glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
SUPPLEMENTARY PREAMBLES
PAINTWORK
All work to be executed in strict accordance with the specifications of Plascon Paints (Pty) Ltd. The coating systems are as per Plascon's 'List of Decorative Paint Products' unless otherwise specified. Full specifications are available on request from Pl
PAINTWORK
Primers and first coats may be thinned in accordance with the paint specifications of Plascon Paints (Pty) Ltd to aid the absorption of the paint.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
All surfaces must be sound, clean and have a moisture content of less than 8% for walls generally and 3% for slabs/screeds etc.
PAINTWORK
Where surfaces of plaster etc are sandy / friable, the first coat must be replaced with 'Plascon Merit' plaster primer thinned 10% with turpentine.
PAINTWORK
All paints are to bear the SABS mark and are to be applied in strict accordance with manufacturer's instructions.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
PAINTWORK
Prices for paintwork are to include for masking and protecting of all finished paintwork and all finished joinery, tiling, floor coverings, etc. during painting. Any damage to such finished work shall be removed, repaired or replaced at the Contractor's e
PAINTWORK
Prices for painting are to include for painting a one square metre sample panel of all finishing coats and for repeating if required. Only after written approval from Architect may finishing coats be applied.
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 ON METAL 0.00 0.00 0.00
2 70 0.00 0.00 0.00
PAINTWORK
Prices for all paintwork are to include all colours which have a value of 8 or higher on the Munsell system in accordance with the relevant SABS specification.
PAINTWORK
The Contractor shall provide all necessary dust sheets, covers, etc. required during painting. All door handles, locks and other ironmongery, pelmets, electrical switch and socket covers, etc. are to be removed before commencing the painting. All paint sp
PAINTWORK
PAINTWORK ETC TO NEW WORK
PAINTWORK
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
2 70 1 m² 112 0.00 0.00 0.00
2 70 2 m² 443 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 3 m² 1085 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 0.00 0.00 0.00
PAINTWORK
On doors, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On corner protectors.
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
PAINTWORK
On IBR metal ceilings (measured flat)
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer' or similar approved, one coat 'Plascon Merit Universal Undercoat' or similar approved and two coats 'Plascon Velvaglo Polyurethane Enamel' or similar approved pai
2 70 4 m 177 0.00 0.00 0.00
2 70 5 m 1148 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 0.00 0.00 0.00
2 70 6 m² 2805 0.00 0.00 0.00
2 71 7 m² 148 0.00 0.00 0.00
2 71 8 m² 435 0.00 0.00 0.00
2 71 9 m 1094 0.00 0.00 0.00
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
PAINTWORK
On interior skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
PAINTWORK, ETC TO PREVIOUSLY PAINTED WORK
PAINTWORK
ON SMOOTH PLASTER
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On interior walls.
PAINTWORK
On interior walls in patterned multi-colours.
PAINTWORK
On narrow widths, (internal & external)
PAINTWORK
On interior walls in bands not exceeding 300mm girth.
2 71 0.00 0.00 0.00
2 71 10 m² 2391 0.00 0.00 0.00
2 71 11 m 266 0.00 0.00 0.00
2 71 ON METAL 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On exterior walls.
PAINTWORK
On exterior mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
2 71 0.00 0.00 0.00
2 71 12 m² 97 0.00 0.00 0.00
2 71 13 m² 177 0.00 0.00 0.00
2 71 14 m² 16 0.00 0.00 0.00
2 71 15 m² 1019 0.00 0.00 0.00
2 72 16 m² 44 0.00 0.00 0.00
2 72 17 m² 89 0.00 0.00 0.00
2 72 18 m 44 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse, spot priming with 'Plascon Namelcote Synthetic Metal Primer' and apply one coat 'Plascon Merit Universal Undercoat'
PAINTWORK
On doors frames
PAINTWORK
On exterior steel roof members at eaves and verges.
PAINTWORK
On windows, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On IBR metal ceilings.(measured flat)
PAINTWORK
On mesh window covers (both sides measured).
PAINTWORK
On metal members supporting walkway covers and overhangs.
PAINTWORK
On rails, bars, pipes, etc not exceeding 300 mm girth.
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 19 m² 74 0.00 0.00 0.00
2 72 20 m² 177 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Su
PAINTWORK
On interior fittings.
PAINTWORK
On exterior roof timbers at eaves and verges.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
2 74 1 m² 115 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 2 m 18 0.00 0.00 0.00
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EXTERNAL WORKS
ROADWORK, PAVING, ETC
EXTERNAL WORKS
Precast concrete kerbs (30 Mpa) finished smooth on exposed surfaces including bedding, cutting, pointing and pointing and 20/19mm Mpa unreinforced concrete haunching at junctions:
EXTERNAL WORKS
Garden kerb 900 x 250 x 75mm high with twice chamfered edges with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
2 74 3 m 18 0.00 0.00 0.00
2 74 4 m 23 0.00 0.00 0.00
2 74 5 m 77 0.00 0.00 0.00
2 75 6 m 69 0.00 0.00 0.00
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc, circular on plan exceeding 4m radius.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc., circular on plan not exceeding 4m radius.
2 75 7 No. 8 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 8 m³ 123 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 9 Soft rock m³ 6 0.00 0.00 0.00
2 75 10 Hard rock m³ 3 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 11 Brickwork. m³ 5 0.00 0.00 0.00
2 75 12 m³ 5 0.00 0.00 0.00
2 75 13 m³ 5 0.00 0.00 0.00
2 75 0.00 0.00 0.00
EXTERNAL WORKS
1,200mm Diameter 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
Open face excavation over sloping site:
EXTERNAL WORKS
Open face excavation to form platform under parking areas etc and carting away surplus material from site to a dumping site to be located by the contractor.
EXTERNAL WORKS
Extra over bulk excavation in earth for excavation in:
EXTERNAL WORKSEXTERNAL WORKS
EXTERNAL WORKS
Extra over bulk excavation in earth for breaking up and removing:
EXTERNAL WORKSEXTERNAL WORKS
Unreinforced concrete.
EXTERNAL WORKS
Reinforced concrete.
EXTERNAL WORKS
Earth filling supplied by the contractor under pavings etc:
2 75 14 m³ 88 0.00 0.00 0.00
2 76 15 m³ 49 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 16 m² 215 0.00 0.00 0.00
2 76 0.00 0.00 0.00
EXTERNAL WORKS
Over site of G5 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Over site of G6 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Compaction of surfaces:
EXTERNAL WORKS
Compaction of ground surface under pavings etc. including scarifying for a depth of 150mm, breaking down oversize material, adding suitable material where necessary and compacting to 95 % Mod AASHTO density (materials to comply with CBR >25%)
EXTERNAL WORKS
Anti-termite soil poison and weedkiller:
2 76 17 m² 215 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 18 m² 215 0.00 0.00 0.00
2 76 0.00 0.00 0.00
2 76 19 m³ 6 0.00 0.00 0.00
2 76 0.00 0.00 0.00
EXTERNAL WORKS
Approved brands of weedkiller and termite poisoning mixed and applied in accordance with the manufacturer's instructions under pavings, etc.
EXTERNAL WORKS
35Mpa standard grey double zig zag interlocking roadstone paving with open joints on and including 25mm thick river sand bed with sand and cement mixture swept into joints, hose down including bedding, jointing and pointing:
EXTERNAL WORKS
Paving in herring borne pattern bond with butt joints to falls.
EXTERNAL WORKS
25Mpa/19mm Reinforced Concrete:
EXTERNAL WORKS
Toes and walls of walkways
EXTERNAL WORKS
Garden soil to planter:
2 76 20 m² 46 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
EXTERNAL WORKS
Remove all building rubble and materials to 500mm depth and fill in with garden soil for grassing, planting, etc (Plant, grass, cost elsewhere measured).
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
EARTHWORKS
NATURE OF GROUND
EARTHWORKS
The nature of the ground is assumed to be loose sandy material, therefore "earth", but possibly interspersed with "hard rock" or "soft rock"
EARTHWORKS
SITE CLEARANCE, ETC.
3 80 0.00 0.00 0.00
3 80 1 m² 948 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 2 Trenches. m³ 173 0.00 0.00 0.00
3 80 3 m³ 6 0.00 0.00 0.00
3 80 0.00 0.00 0.00
3 80 4 Soft rock. m³ 18 0.00 0.00 0.00
3 80 5 Hard rock. m³ 8 0.00 0.00 0.00
3 81 0.00 0.00 0.00
EARTHWORKS
Site clearance, etc.:
EARTHWORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKSEARTHWORKS
Compaction:
3 81 6 m² 173 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 7 m² 520 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 8 m³ 49 0.00 0.00 0.00
3 81 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of excavated surfaces to receive concrete footings, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically Vibrated:
EARTHWORKS
In trenches, holes etc under strip foundations.
EARTHWORKS
CARTING AWAY.
3 81 0.00 0.00 0.00
3 81 9 m³ 55 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 10 m³ 75 0.00 0.00 0.00
3 81 11 m³ 44 0.00 0.00 0.00
3 81 0.00 0.00 0.00
3 81 12 m³ 40 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Backfilling to trenches, holes, etc.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
3 82 0.00 0.00 0.00
3 82 13 m³ 22 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 14 m² 243 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 0.00 0.00 0.00
3 82 15 Item 1 0.00 0.00 0.00
3 82 0.00 0.00 0.00
EARTHWORKS
Coarse river sand filling compacted to 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, etc.
EARTHWORKS
Surface Preparation:
EARTHWORKS
Trim and level off surface of natural ground surfaces to receive concrete paving, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
KEEPING EXCAVATIONS FREE OF WATER
EARTHWORKS
Keeping excavations free of water:
EARTHWORKS
Allow for keeping excavations free of water by hand or machinery.
EARTHWORKS
SOIL POISONING
3 82 0.00 0.00 0.00
3 82 16 m² 173 0.00 0.00 0.00
3 82 17 m² 446 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
EARTHWORKS
Approved brands of weedkiller mixed with termite poison and applied in accordance with the manufacturer's instructions:
EARTHWORKS
To bottoms of trenches, etc.
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 1 Sets 24 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 2 m³ 44 0.00 0.00 0.00
3 84 3 m³ 31 0.00 0.00 0.00
3 84 4 m3 0.15 0.00 0.00 0.00
3 84 5 m3 1.8 0.00 0.00 0.00
3 84 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds cast in panels on waterproofing.
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds.
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE CAST AGAINST EXCAVATED SURFACES
3 84 0.00 0.00 0.00
3 84 6 m³ 40 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 7 m² 443 0.00 0.00 0.00
3 85 8 m² 243 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 9 m 210 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Strip footings.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a power float:
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds, slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
3 85 10 m² 16 0.00 0.00 0.00
3 85 11 m 238 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 1 m² 89 0.00 0.00 0.00
3 MASONRY 87 2 m² 204 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
BRICKWORK IN FOUNDATIONS (PROVISIONAL)
Brickwork of concrete bricks [14Mpa] in Class I mortar:Half brick walls.One brick walls.BRICKWORK IN SUPERSTRUCTURE
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 3 m² 205 0.00 0.00 0.00
3 MASONRY 87 4 m² 32 0.00 0.00 0.00
3 MASONRY 87 5 m² 472 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 0.00 0.00 0.00
3 MASONRY 87 6 m 59 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 7 m² 405 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 8 m² 405 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 9 m² 5 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
Brickwork of concrete bricks [7Mpa] in Class I mortar:Half brick walls.Half brick walls in beamfilling.One brick walls.BRICKWORK SUNDRIESBrickwork sundries:Brick-on-edge cill set sloping and projecting.Fair face to brickwork in horizontal stretcher bond pointed with recessed horizontal and flush vertical joints:Extra for fair face.Cement wash of 1:3 liquid cement and sand mixture applied with a brush:On brick surfaces.Joint forming material in movement joints:10mm Bitumen impregnated fibre board built in vertically through brick walls.Brickwork reinforcement:
3 MASONRY 88 10 m 1090 0.00 0.00 0.00
3 MASONRY 88 11 m 1025 0.00 0.00 0.00
3 MASONRY 88 12 m 2518 0.00 0.00 0.00
3 MASONRY 88 13 m 2471 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 14 m 159 0.00 0.00 0.00
3 MASONRY 88 0.00 0.00 0.00
3 MASONRY 88 15 No. 12 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 16 No. 16 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
75mm Wide reinforcement built in horizontally in foundations.75mm Wide reinforcement built in horizontally.
150mm Wide reinforcement built in horizontally in foundations.
150mm Wide reinforcement built in horizontally.Approved prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.Galvanised wire ties etc:4mm Diameter roof tie 2m girth bent double with one end tied around steel purlin and other end built into brickwork.Galvanised hoop iron cramps, ties, etc:30 x 1,6mm Roof tie 2,0m long tied around steel purlin and shot pinned to both sides of brickwork.Air bricks etc:
3 MASONRY 89 17 No. 24 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 0.00 0.00 0.00
3 MASONRY 89 18 m² 5 0.00 0.00 0.00
3 MASONRY 89 19 m 1 0.00 0.00 0.00
3 91 0.00 0.00 0.00
230 x 160mm Galvanised air brick.BRICK PAVINGPaving of 65mm thick cement paving bricks with open joints on 50mm thick river sand bed with sand and cement mixture swept into joints, hosed down and pointed with slightly keyed joints including termite and soil posioning, preparation of ground or fillinPaving in fish bone patern.
110mm Wide brick-on-end edging on 100mm thick concrete bed.
WATERPROOFING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 91 0.00 0.00 0.00
3 91 0.00 0.00 0.00
3 91 0.00 0.00 0.00
3 91 1 In walls. m² 24 0.00 0.00 0.00
3 91 0.00 0.00 0.00
3 91 2 m² 521 0.00 0.00 0.00
3 91 0.00 0.00 0.00
3 91 0.00 0.00 0.00
3 91 3 m 22 0.00 0.00 0.00
WATERPROOFING
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
WATERPROOFING
DAMPPROOFING OF WALLS AND FLOORS
WATERPROOFING
One layer of 375 micron Consol Plastics Brikgrip DPC embossed damp proof course:
WATERPROOFING
WATERPROOFING
One layer of 250 micron Consol Plastics Gunplas Black waterproof sheeting sealed at laps with Gunplas Pressure Sensitive Tape:
WATERPROOFING
Under surface beds.
WATERPROOFING
JOINT SEALANTS ETC
WATERPROOFING
'Expandite' or other approved two-part grey polysulphide sealing compound including backing cord, bond breaker, primer, etc:
WATERPROOFING
10 x 15mm In vertical expansion joints.
3 91 0.00 0.00 0.00
3 91 4 m 25 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
3 92 0.00 0.00 0.00
WATERPROOFING
'Sikaflex' PRO-3 WF multi-use, one component, polyurethane sealant in colour Concrete Grey applied in accordance with the manufacturer's instructions:
WATERPROOFING
10 x 15mm elastic joint on floor tiling.
ROOF COVERINGS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ROOF COVERINGS
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
ROOF COVERINGS
TROUGHED METAL SHEETING AND ACCESSORIES
3 92 0.00 0.00 0.00
3 92 1 m² 756 0.00 0.00 0.00
3 92 Flashings: 0.00 0.00 0.00
3 92 2 m 68 0.00 0.00 0.00
3 92 3 m 130 0.00 0.00 0.00
3 92 4 m 134 0.00 0.00 0.00
3 92 5 No. 6 0.00 0.00 0.00
3 93 0.00 0.00 0.00
3 93 0.00 0.00 0.00
ROOF COVERINGS
0.5mm Thick industrial Z275 IBR profiled or similar approved sheet steel in single lengths fixed to steel purlins or rails and sheet steel accessories:
ROOF COVERINGS
Roof covering with pitch not exceeding 25 degrees, in transportable lengths not exceeding 20m.
ROOF COVERINGS
ROOF COVERINGS
Ridge capping 550mm girth, three times bent along girth and notched on site to suit IBR roof profile.
ROOF COVERINGS
Serrated eaves closers.
ROOF COVERINGS
Narrow and broad flute closers.
ROOF COVERINGS
Ridge cape and closures to suit IBR profile
ROOF COVERINGS
ROOF AND WALL INSULATION
ROOF COVERINGS
Sisalation 400 housing grade glass fibre reinforced aluminium foil bonded insulation:
3 93 6 m² 604 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 1 No. 1 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 2 m 139 0.00 0.00 0.00
ROOF COVERINGS
Insulation laid taut over purlins on galvanised straining wires (at approximately 300mm centres).
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
CARPENTRY AND JOINERY
FLUSH DOORS
CARPENTRY AND JOINERY
Semi-solid flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought 'Supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
3 95 3 m 160 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 4 No. 14 0.00 0.00 0.00
3 95 5 No. 14 0.00 0.00 0.00
CARPENTRY AND JOINERY
22 x 75mm cornice.
CARPENTRY AND JOINERY
NOTICE BOARDS, PINNING BOARDS, KEYBOARDS, DUCKBOARDS, ETC
CARPENTRY AND JOINERY
Vitrex or similar approved:
CARPENTRY AND JOINERY
Pinboards model 2300 code: '2315', size 1,000 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F3).
CARPENTRY AND JOINERY
Pinboard model 2300 code: '2309', size 2,400 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F1).
3 96 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 1 Ceilings. m² 454 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
CEILINGS PARTITIONS AND ACCESS FLOORING
NAILED UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm Thick light industrial Z275 IBR profiled sheet steel in single lengths fixed to steel purlins or rails:
CEILINGS PARTITIONS AND ACCESS FLOORING
3 96 2 No. 3 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 3 m 114 0.00 0.00 0.00
3 96 4 m 160 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 2.5mm angle section framing covered with 'Alu zinc' IBR profiled sheeting and fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
and broad flute closers 150mm girth to suit IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
3 97 LOCKS 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 1 No. 1 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 2 No. 30 0.00 0.00 0.00
3 97 Solid: 0.00 0.00 0.00
3 97 3 No. 15 0.00 0.00 0.00
3 97 4 No. 4 0.00 0.00 0.00
3 97 5 No. 1 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 0.00 0.00 0.00
3 97 6 No. 1 0.00 0.00 0.00
3 98 7 No. 1 0.00 0.00 0.00
3 98 SUNDRIES 0.00 0.00 0.00
3 98 0.00 0.00 0.00
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset with striking plate fixed to metal complete with a pair of handles.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
IRONMONGERY
20mm High letter or numeral.
IRONMONGERY
150 x 150mm Anodised aluminium plate with male or female symbol.
IRONMONGERY
150 x 150mm Natural anodised aluminium plate with paraplegic symbol.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Chairman Industries:
IRONMONGERY
32mm Type DL2 back grab rail plugged.
IRONMONGERY
32mm Type SR2 side grab rail plugged.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
3 98 8 No. 13 0.00 0.00 0.00
3 98 Solid: 0.00 0.00 0.00
3 98 9 No. 4 0.00 0.00 0.00
3 98 10 No. 8 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 11 No. 2 0.00 0.00 0.00
IRONMONGERY
38mm Diameter rubber door stop floor mounted.
IRONMONGERY
IRONMONGERY
38mm Diameter rubber door stop.
IRONMONGERY
38mm Diameter rubber door stop plugged to wall.
IRONMONGERY
SHELVING UNITS
IRONMONGERY
Approved industrial steel shelving units with standard epoxy powder coated finish including uprights, open base foot pieces, shelf brackets, shelves, spacers, top rails, top finishing plates and adjustable book clips:
IRONMONGERY
Single shelving unit 3600 x 312 x 1905mm high in 4 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
3 98 12 No. 2 0.00 0.00 0.00
3 98 13 No. 1 0.00 0.00 0.00
3 98 14 No. 1 0.00 0.00 0.00
3 98 15 No. 1 0.00 0.00 0.00
3 99 16 No. 1 0.00 0.00 0.00
3 99 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 7200 x 312 x 1905mm high in 8 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 1800 x 312 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 1800 x 450 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 450mm shelves.
IRONMONGERY
Single shelving unit 4500 x 312 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 4500 x 450 x 1905mm high in 5 bays with uprights, each bay 900mm wide with 6 x 3450mm shelves.
IRONMONGERY
STEEL LOCKERS
3 99 0.00 0.00 0.00
3 99 17 No. 6 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 0.00 0.00 0.00
3 99 18 No. 7 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
IRONMONGERY
Approved steel lockers with standard baked enamel finish:
IRONMONGERY
Teachers cupboard 900 x 450 x 1800mm high with four adjustable shelves.
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or similar approved:
IRONMONGERY
System 1000 green writing board 2700 x 1140mm high with chalk rail plugged.
STRUCTURAL STEELWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
STRUCTURAL STEELWORK
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 1 Kg 2450 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 2 Kg 6 0.00 0.00 0.00
3 101 3 No. 176 0.00 0.00 0.00
3 101 4 No. 44 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 5 Kg 2560 0.00 0.00 0.00
3 101 6 Kg 1517 0.00 0.00 0.00
STRUCTURAL STEELWORK
STEEL TRUSSES ETC
STRUCTURAL STEELWORK
Welded roof trusses of angle section rails, struts, braces, cleats, etc and flat section bearer, gusset and connection plates bolted to steel:
STRUCTURAL STEELWORK
Seventeen double pitched trusses 10440 x 1024mm high extreme.
STRUCTURAL STEELWORK
Bolts to trusses etc:
STRUCTURAL STEELWORK
High tensile bolts.
STRUCTURAL STEELWORK
M8 x 100mm Expansion bolt.
STRUCTURAL STEELWORK
12mm Diameter U-shaped anchor bolt 800mm girth.
STRUCTURAL STEELWORK
PURLINS, GIRTS, BRACING, ETC
STRUCTURAL STEELWORK
Purlins and girts bolted to steel:
STRUCTURAL STEELWORK
Lipped channel section purlins.
STRUCTURAL STEELWORK
Lipped channel section brandering.
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 1 Kg 24 0.00 0.00 0.00
3 102 2 No. 32 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
METALWORK
SUNDRY STEELWORK
METALWORK
Welded bearers and framing to ceiling trapdoor:
METALWORK
30 x 30 x 2.5mm Angle section framing.
METALWORK
Extra over 30 x 30 x 2.5mm angle section for welded T-intersection.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
Screens and gates:
3 102 3 No. 3 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 4 No. 1 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 5 No. 3 0.00 0.00 0.00
3 103 6 No. 6 0.00 0.00 0.00
3 103 7 No. 13 0.00 0.00 0.00
METALWORK
Single burglar gate 813 x 2337mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 1167mm long 12 x 12
METALWORK
PRESSED STEEL DOOR FRAMES
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 813 x 2032mm high.
METALWORK
STEEL WINDOWS, DOORS, ETC.
METALWORK
Standard residential windows with NBP2 burglar bars to all sections:
METALWORK
Window type NG2, 1022 x 359mm high (W3).
METALWORK
Window type E2H, 1022 x 654mm high.
METALWORK
Window type E4H, 1511 x 654mm high (W2).
3 103 8 No. 20 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 9 No. 9 0.00 0.00 0.00
3 103 10 No. 2 0.00 0.00 0.00
3 103 11 No. 7 0.00 0.00 0.00
METALWORK
Window type D4H, 1511 x 1245mm high (W1).
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard 'Wispeco' chawl door with back panel:
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock complete with a pair of handles.
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Blesbok 460/313 four lever mortice lock complete with a pair of handles.
METALWORK
Modified door 713 x 2032mm high with double rebated frame suitable for 813 x 2032mm high door and for half wall and with 'Solid' Besbok 464/364 WC lockset.
3 103 12 No. 3 0.00 0.00 0.00
3 103 13 No. 2 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 SCREEDS 0.00 0.00 0.00
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock.
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
PLASTERING
3 105 0.00 0.00 0.00
3 105 1 m² 458 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 2 On walls. m² 855 0.00 0.00 0.00
3 105 3 m² 21 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 4 m² 14 0.00 0.00 0.00
3 105 5 m 450 0.00 0.00 0.00
3 105 6 m 59 0.00 0.00 0.00
3 106 0.00 0.00 0.00
3 106 0.00 0.00 0.00
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake or similar approved floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
PLASTERING
On 200mm wide band.
PLASTERING
On sloping top, edge and projecting soffits of sills 505mm girth.
PLASTERING
CORNER PROTECTORS, DIVIDING STRIPS, ETC
PLASTERING
Corner protectors, dividing strips, etc:
3 106 7 m 13 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 1 m 350 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
PLASTERING
3 x 35mm Flat section steel weather bar.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet BlocksNOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.WALL TILING
3 TILING 108 0.00 0.00 0.00
3 TILING 108 2 m² 1 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 0.00 0.00 0.00
3 TILING 108 3 m² 5 0.00 0.00 0.00
3 TILING 108 4 No. 9 0.00 0.00 0.00
3 TILING 108 5 m 350 0.00 0.00 0.00 3 TILING 109 SUNDRIES 0.00 0.00 0.00 3 TILING 109 Sundries: 0.00 0.00 0.00
3 TILING 109 6 m 3 0.00 0.00 0.00
300 x 300mm 'Dimo Top' unglazed ceramic tiles fixed with adhesive to plaster (plaster elsewhere) and flush pointed with tinted jointing compound:On walls as splash backs.FLOOR TILING
300 x 300mm 'Dimo Top' unglazed floor tiles on average 35mm bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors to falls.Circular cutting.100mm high cut tile skirting.
'Schluter Rondec' aluminium tile edging.
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 Sundries: 0.00 0.00 0.00
3 111 1 Item 1 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 2 No. 6 0.00 0.00 0.00
3 111 0.00 0.00 0.00
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
PLUMBING AND DRAINAGE
SOIL DRAINAGE
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing waste pipe system.
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
Approved stainless steel:
PLUMBING AND DRAINAGE
506 x 450mm Wash hand basins.
PLUMBING AND DRAINAGE
'Citimetal' stainless steel:
3 111 3 No. 2 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 4 No. 7 0.00 0.00 0.00
3 111 5 No. 2 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 6 No. 6 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Type TU 101 urinal 1460mm wide with 11 litre 'Shires Lynx' automatic flushing cistern, flush and sparge pipes and hinged domical grating.
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
PLUMBING AND DRAINAGE
High level water-saving WC suit comprising of Polyethylene toilet bowl with heavy duty double flap seat and cover, 'Shires' remote flushing control and 9l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover 9l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
Waste unions etc:
PLUMBING AND DRAINAGE
40mm 'Cobra' 310 sink waste outlet.
3 112 TRAPS ETC 0.00 0.00 0.00
3 112 uPVC: 0.00 0.00 0.00
3 112 7 No. 6 0.00 0.00 0.00
3 112 Brass: 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 8 No. 15 0.00 0.00 0.00
3 112 9 No. 6 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 10 m 4 0.00 0.00 0.00
3 112 11 m 7 0.00 0.00 0.00
3 112 12 m 7 0.00 0.00 0.00
3 112 13 m 15 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 14 No. 1 0.00 0.00 0.00
3 113 15 No. 3 0.00 0.00 0.00
3 113 16 No. 11 0.00 0.00 0.00
3 113 17 No. 5 0.00 0.00 0.00
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
40mm Deep seal 'P' or 'S' trap.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech':
PLUMBING AND DRAINAGE
15mm Star 232/350CP angle regulating valve.
PLUMBING AND DRAINAGE
15mm Star 214CP bibtap.
PLUMBING AND DRAINAGE
SANITARY PLUMBING
PLUMBING AND DRAINAGE
uPVC pipes:
PLUMBING AND DRAINAGE
50mm Pipes.
PLUMBING AND DRAINAGE
110mm Pipes.
PLUMBING AND DRAINAGE
40mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
110mm Pipes laid in and including trenches not exceeding 1m deep.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
110mm Reducer.
PLUMBING AND DRAINAGE
50mm Bend.
PLUMBING AND DRAINAGE
110mm Bend.
PLUMBING AND DRAINAGE
110mm Reducing junction.
3 113 18 No. 8 0.00 0.00 0.00
3 113 19 No. 2 0.00 0.00 0.00
3 113 20 No. 1 0.00 0.00 0.00
3 113 21 No. 8 0.00 0.00 0.00
3 113 22 No. 1 0.00 0.00 0.00
3 113 23 No. 1 0.00 0.00 0.00
3 113 24 No. 1 0.00 0.00 0.00
3 113 25 No. 1 0.00 0.00 0.00
3 114 26 No. 1 0.00 0.00 0.00
3 114 Gulleys: 0.00 0.00 0.00
3 114 27 No. 4 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Pan connector.
PLUMBING AND DRAINAGE
110mm Bent pan connector.
PLUMBING AND DRAINAGE
40mm Access bend.
PLUMBING AND DRAINAGE
110mm Access bend.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of three x 110mm, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, one x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, two x 40mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
110mm Overflow gulley not exceeding 1m deep.
3 114 0.00 0.00 0.00
3 114 28 No. 10 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 29 m 29 0.00 0.00 0.00
3 114 30 m 8 0.00 0.00 0.00
3 114 0.00 0.00 0.00
3 114 31 No. 38 0.00 0.00 0.00
3 114 32 No. 10 0.00 0.00 0.00
3 114 33 No. 10 0.00 0.00 0.00
3 114 34 No. 1 0.00 0.00 0.00
3 114 TESTING 0.00 0.00 0.00
3 114 Testing: 0.00 0.00 0.00
3 115 36 m 18 0.00 0.00 0.00
3 114 35 Item 1 0.00 0.00 0.00
3 115 37 m 2 0.00 0.00 0.00
3 115 38 No. 4 0.00 0.00 0.00
3 115 39 m 5 0.00 0.00 0.00
3 115 40 No. 2 0.00 0.00 0.00
PLUMBING AND DRAINAGE
FLUE PIPES ETC
PLUMBING AND DRAINAGE
110mm Access junction.
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
15mm Pipes.
PLUMBING AND DRAINAGE
28mm Pipes.
PLUMBING AND DRAINAGE
Extra over class 10 copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
28mm Fittings.
PLUMBING AND DRAINAGE
Connection of 28mm pipe to 35mm HDPE pipe.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
50mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
40mm Bend.
PLUMBING AND DRAINAGE
40mm Pipes.
PLUMBING AND DRAINAGE
50mm Junction.
3 115 41 No. 5 0.00 0.00 0.00
3 115 42 No. 2 0.00 0.00 0.00
3 115 43 No. 1 0.00 0.00 0.00
3 115 0.00 0.00 0.00
3 115 'Chubb': 0.00 0.00 0.00
3 115 44 No. 5 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
PLUMBING AND DRAINAGE
50mm 'GI Two-way' vent valve.
PLUMBING AND DRAINAGE
50mm Reseal 'P' trap.
PLUMBING AND DRAINAGE
50mm Access bend.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
9kg Dry chemical fire extinguisher with backing board.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ELECTRICAL WORK
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
ELECTRICAL WORK
DISTRIBUTION BOARDS
3 117 0.00 0.00 0.00
3 117 1 No. 4 0.00 0.00 0.00
3 117 2 No. 1 0.00 0.00 0.00
3 117 3 No. 1 0.00 0.00 0.00
3 117 4 No. 7 0.00 0.00 0.00
3 117 5 No. 2 0.00 0.00 0.00
3 117 6 No. 2 0.00 0.00 0.00
3 117 7 No. 1 0.00 0.00 0.00
3 117 8 No. 1 0.00 0.00 0.00
3 118 9 No. 1 0.00 0.00 0.00
3 118 CABLES 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 10 m 12 0.00 0.00 0.00
ELECTRICAL WORK
Lockable distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock.
ELECTRICAL WORK
Distribution board build into wall.
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
40A Single pole circuit breaker.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
20A Single pole circuit breaker.
ELECTRICAL WORK
16A Single pole circuit breaker.
ELECTRICAL WORK
16A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
40A Single pole earth leakage.
ELECTRICAL WORK
ELECTRICAL WORK
V PVC/SWA/PVC copper cable pulled in cable sleeves (sleeves measured elsewhere).
ELECTRICAL WORK
16mm2 2-Core.
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 11 No. 3 0.00 0.00 0.00
3 118 EARTHING 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 12 m 12 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 13 No. 4 0.00 0.00 0.00
3 118 SLEEVES 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 14 m 7 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 15 m 11 0.00 0.00 0.00
3 119 0.00 0.00 0.00
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere).
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on UPVC piping for:
3 119 16 No. 4 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 17 m 220 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 18 m 46 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 19 m 45 0.00 0.00 0.00
3 119 20 m 15 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 0.00 0.00 0.00
3 119 21 No. 44 0.00 0.00 0.00
3 119 22 No. 14 0.00 0.00 0.00
3 119 0.00 0.00 0.00
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Cast in concrete, surface bed or screed.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
25mm Diameter.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enameled fixed onto conduit.
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Metal type fixed onto PVC conduit.
3 119 23 No. 1 0.00 0.00 0.00
3 120 24 No. 10 0.00 0.00 0.00
3 120 25 No. 8 0.00 0.00 0.00
3 120 26 No. 1 0.00 0.00 0.00
3 120 27 No. 2 0.00 0.00 0.00
3 120 28 No. 3 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 29 2.5mm². m 221 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 30 2.5mm². m 430 0.00 0.00 0.00
3 120 31 4mm². m 100 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 32 No. 2 0.00 0.00 0.00
3 120 33 No. 2 0.00 0.00 0.00
3 120 34 No. 2 0.00 0.00 0.00
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Cover plate for 100mm x 50mm box.
ELECTRICAL WORK
Cover plate for 100mm x 100mm box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORK
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
16A Water proof light switch.
ELECTRICAL WORK
16A Two-lever one-way switch.
ELECTRICAL WORK
10A Day light switch.
3 121 35 No. 10 0.00 0.00 0.00
3 121 36 No. 8 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 37 No. 2 0.00 0.00 0.00
3 121 38 No. 8 0.00 0.00 0.00
3 121 39 No. 30 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 40 No. 3 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 0.00 0.00 0.00
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with lamps, connections, etc., mounted in position
ELECTRICAL WORK
'Lascon B10' ceiling mounted light fitting and bulb. (Type A)
ELECTRICAL WORK
'Lascon B10' wall mounted light fitting and bulb. (Type B)
ELECTRICAL WORK
1200mm Double tube 58W open channel fluorescent light fitting and tubes (C).
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level:
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Conductors, etc.:
3 121 41 m 90 0.00 0.00 0.00
3 121 42 m 16 0.00 0.00 0.00
3 121 43 No. 8 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
ELECTRICAL WORK
6mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
ELECTRICAL WORK
70mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet BlocksGLAZING TO STEEL WITH PUTTY
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 1 m² 41 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 2 m² 4 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 0.00 0.00 0.00
3 GLAZING 123 3 No. 6 0.00 0.00 0.00
4mm Clear float glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.4mm Obscure:
Panes exceeding 0,1m2 and not exceeding 0,5m2.TOPS, SHELVES, DOORS, MIRRORS, ETC.
6mm Silvered float glass copper backed mirrors with polished edges holed for and fixed with chromium plated dome capped mirror screws with rubber buffers to plugs in brickwork or concrete:Mirror 450 x 600 mm high with four screws.
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 1 m² 48 0.00 0.00 0.00
3 124 2 m 530 0.00 0.00 0.00
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
PAINTWORK
ON FLOATED PLASTER
PAINTWORK
One coat primer and two coats exterior quality PVA emulsion paint:
PAINTWORK
On external floated plaster walls.
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
3 124 0.00 0.00 0.00
3 124 3 m² 1061 0.00 0.00 0.00
3 124 4 m 420 0.00 0.00 0.00
3 124 ON METAL 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 5 m² 207 0.00 0.00 0.00
3 124 6 m² 1 0.00 0.00 0.00
3 125 7 m² 119 0.00 0.00 0.00
3 125 0.00 0.00 0.00
PAINTWORK
One coat alkali resistant primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
On internal floated plaster walls.
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
PAINTWORK
On combination doors and frames.
PAINTWORK
On door frames.
PAINTWORK
On windows with burglar bars.
PAINTWORK
One coat calcium plumbate primer, one undercoat and two coats enamel paint on steel:
3 125 8 m² 12 0.00 0.00 0.00
3 125 9 m² 188 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 10 m² 494 0.00 0.00 0.00
3 125 ON WOOD 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 11 m 139 0.00 0.00 0.00
3 125 12 On doors. m² 4 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 13 m 155 0.00 0.00 0.00
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On members of roof trusses.
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
PAINTWORK
One coat wood primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
PAINTWORK
Three coats clear varnish:
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
3 125 0.00 0.00 0.00
3 125 0.00 0.00 0.00
3 125 14 No. 12 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 1 Holes. m3 0.3 0.00 0.00 0.00
PAINTWORK
SIGNWRITING
PAINTWORK
Remove all loose particles and laitance and applu one coat Plascon Waterbased Plaster Primer and two coats Pure Acrylic PVA(allow sufficient time or drying between coats):
PAINTWORK
Numeral or letter 500mm high.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
The Following bills cater for:
A:2 x 3 Classroom BlocksB:1 x Waterborne Toilet Blocks
EXTERNAL WORKS
THE FOLLOWING IN FLAG POLE
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
3 127 0.00 0.00 0.00
3 127 2 m² 3 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 3 m 7 0.00 0.00 0.00
3 127 Bolts: 0.00 0.00 0.00
3 127 4 No. 2 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 5 m 5 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 6 m3 0.37 0.00 0.00 0.00
3 128 7 m3 0.3 0.00 0.00 0.00
3 128 Flagpole: 0.00 0.00 0.00
3 128 8 m 5 0.00 0.00 0.00
3 128 9 No. 2 0.00 0.00 0.00
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a steel trowel:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Rough Formwork to Sides:
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide.
EXTERNAL WORKS
EXTERNAL WORKS
M10 x 75mm Bolts.
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
25Mpa/19mm Concrete
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
Flagpole bases.
EXTERNAL WORKS
EXTERNAL WORKS
50mm Diameter galvanised pipe.
EXTERNAL WORKS
100 x 40 x 2.5mm Channel 2000mm long and cast into concrete 500mm deep.
3 128 10 No. 1 0.00 0.00 0.00
3 128 11 No. 1 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 12 No. 1 0.00 0.00 0.00
3 128 13 m² 1 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 14 m 10 0.00 0.00 0.00
3 128 15 m² 2 0.00 0.00 0.00
3 128 0.00 0.00 0.00
3 128 uPVC: 0.00 0.00 0.00
3 128 16 Item 1 0.00 0.00 0.00
EXTERNAL WORKS
6mm Diameter bend eye 35mm girth welded to 50mm diameter flagpole.
EXTERNAL WORKS
Fixing hook formed with two 6mm Diameter round bar bend to right angles 45mm and welded to upright.
EXTERNAL WORKS
One coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on steel:
EXTERNAL WORKS
Extra over 50mm diameter pipe for closed end.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
SOIL DRAINAGE
EXTERNAL WORKS
EXTERNAL WORKS
Connection to existing water supply including all necessary fittings.
3 129 17 m 30 0.00 0.00 0.00
3 129 18 m 20 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 19 No. 1 0.00 0.00 0.00
3 129 20 No. 6 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 21 No. 1 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 22 No. 1 0.00 0.00 0.00
3 129 0.00 0.00 0.00
3 129 Brass: 0.00 0.00 0.00
3 129 23 No. 1 0.00 0.00 0.00
3 129 24 m² 9 0.00 0.00 0.00
3 129 Sundries: 0.00 0.00 0.00
EXTERNAL WORKS
110mm Slotted uPVC agriculture pipes laid in trenches (elsewhere measured).
EXTERNAL WORKS
110mm Pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
Extra over uPVC pipes for fittings:
EXTERNAL WORKS
110mm End cap.
EXTERNAL WORKS
110mm Junction.
EXTERNAL WORKS
Inspection chambers (covers elsewhere):
EXTERNAL WORKS
Inspection chamber 450 x 600mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Gratings, covers, etc:
EXTERNAL WORKS
450 x 600mm x 53kg Cast iron single seal manhole cover and frame.
EXTERNAL WORKS
TAPS, VALVES, ETC
EXTERNAL WORKSEXTERNAL WORKS
35mm Stopcock.
EXTERNAL WORKS
Type 395 fabric reinforcement in concrete surface beds, slabs, etc.
EXTERNAL WORKS
3 129 25 No. 1 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 26 m 40 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 27 No. 1 0.00 0.00 0.00
3 130 28 No. 1 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 29 No. 6 0.00 0.00 0.00
3 130 30 Item 1 0.00 0.00 0.00
EXTERNAL WORKS
350 x 350mm Cast iron stopcock box including brick chamber below not exceeding 1000mm deep internally.
EXTERNAL WORKS
WATER RETICULATION
EXTERNAL WORKS
Class 10 HDPE pipes:
EXTERNAL WORKS
35mm Pipes laid in and including trenches.
EXTERNAL WORKS
Extra over HDPE pipes for solvent welded pressure fittings:
EXTERNAL WORKS
35mm Reducer.
EXTERNAL WORKS
35mm Elbow.
EXTERNAL WORKS
EXTERNAL WATER SUPPLIES
EXTERNAL WORKS
French drains:
EXTERNAL WORKS
French drain comprising of 700 x 780 x 5000mm long trench including flat stone placed over slots of agricultural pipes (elsewhere measured) and trench filled with graded stone.
EXTERNAL WORKS
Connect to existing water supply including water meter and all necessary fittings.
3 130 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 31 m 40 0.00 0.00 0.00
3 130 32 m 60 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 0.00 0.00 0.00
3 130 33 No. 4 0.00 0.00 0.00
3 131 34 No. 4 0.00 0.00 0.00
3 131 0.00 0.00 0.00
3 131 0.00 0.00 0.00
3 131 35 m 40 0.00 0.00 0.00
3 131 0.00 0.00 0.00
3 131 36 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
ELECTRICAL RETICULATION
EXTERNAL WORKS
600/1000 V PVC/PVC/SWA/PVC copper cable laid in and including trenches and backfilling.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
35mm2 4-Core.
EXTERNAL WORKS
CABLE TERMINATIONS
EXTERNAL WORKS
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
35mm2 4-Core.
EXTERNAL WORKS
EARTH CONDUCTOR TERMINATION
EXTERNAL WORKS
Bare copper earth conductor installed with cable (cable measured elsewhere).
EXTERNAL WORKS
10mm2 Conductor.
EXTERNAL WORKS
Termination for bare and PVC insulated copper conductors including lugs and connections.
EXTERNAL WORKS
10mm2 Conductor.
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
Making good damaged work, etc:
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
4 135 0.00 0.00 0.00
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
4 135 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 0.00 0.00 0.00
4 136 1 Steps. m³ 1 0.00 0.00 0.00
4 137 0.00 0.00 0.00
4 137 2 m³ 1 0.00 0.00 0.00
4 137 3 Columns. m³ 1 0.00 0.00 0.00
4 137 0.00 0.00 0.00
4 137 4 m³ 1 0.00 0.00 0.00
4 137 5 m² 1 0.00 0.00 0.00
4 137 6 m² 1 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
ALTERATIONS
Breaking up and removing reinforced concrete including cutting off and removing reinforcement:
ALTERATIONS
Stairs and landings.
ALTERATIONS
ALTERATIONS
Breaking down and removing brickwork etc:
ALTERATIONS
Mass brickwork.
ALTERATIONS
Half brick wall.
ALTERATIONS
One brick wall.
4 137 0.00 0.00 0.00
4 137 7 m 464 0.00 0.00 0.00
4 139 0.00 0.00 0.00
4 139 0.00 0.00 0.00
4 139 0.00 0.00 0.00
4 139 1 m² 105 0.00 0.00 0.00
ALTERATIONS
Taking out/off and removing sundry metalwork:
ALTERATIONS
1,800mm High wire mesh security fence complete standard columns, posts, stays, bracers, etc.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary preambles which are incorporated in this Bill
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
4 139 FENCING 0.00 0.00 0.00
4 139 0.00 0.00 0.00
4 139 2 m 464 0.00 0.00 0.00
4 139 3 m 464 0.00 0.00 0.00
4 139 4 No. 46 0.00 0.00 0.00
EXTERNAL WORKS
EXTERNAL WORKS
Security fencing, gates, etc including two coats bitumious aluminium paint on metal stays, framing, etc:
EXTERNAL WORKS
Security fencing 2,100mm high vertically formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanised razor wires ' bar
EXTERNAL WORKS
Mass concrete 20Mpa/19mm ground beam 150 x 350mm deep including necessary excavation, formwork, backfilling, etc,.
EXTERNAL WORKS
Horizontal stay 76mm diameter 2000mm long with each end bolted to posts.
4 139 5 No. 5 0.00 0.00 0.00
4 140 6 No. 9 0.00 0.00 0.00
4 140 7 No. 46 0.00 0.00 0.00
EXTERNAL WORKS
Inclined stay 50mm diameter 2500mm long with one end bolted to post and other end welded to 200 x 200 x 5mm sole plate and cast into and including (750 x 400 x 400 mm deep 15Mpa/19) concrete base.
EXTERNAL WORKS
Straining post 100mm diameter 2,100mm high vertically, with 200 x 200 x 5mm sole plate and cast into and including (500 x 500 x 900mm 15Mpa/19) concrete base.
EXTERNAL WORKS
Corner post 100mm diameter 2,100 mm high vertically with 200 x 200x 5 mm sole plate and cast into and including (500 x 500 x 900 mm 15 Mpa/19) concrete base
4 140 8 No. 3 0.00 0.00 0.00
4 140 9 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
Single gate 1,000 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
EXTERNAL WORKS
Single gate 1,500 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
4 140 10 No. 1 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 11 Trenches m³ 325 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 12 m² 928 0.00 0.00 0.00
4 141 0.00 0.00 0.00
EXTERNAL WORKS
Double gate 5,000 x 2,100mm high in equal leaves, each leave formed of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbe
EXTERNAL WORKS
THE FOLLOWING IN YARD WALL.
EXTERNAL WORKS
Excavation not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep
EXTERNAL WORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically vibrated:
4 141 13 m³ 32 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 14 m³ 167 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 15 Item 1 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 16 m³ 81 0.00 0.00 0.00
4 141 0.00 0.00 0.00
4 141 17 m² 464 0.00 0.00 0.00
4 141 18 m² 557 0.00 0.00 0.00
4 142 19 m² 102 0.00 0.00 0.00
4 142 0.00 0.00 0.00
EXTERNAL WORKS
In trenches, holes, etc under strip footings.
EXTERNAL WORKS
Selected earth filling supplied by the contractor under floor, etc (material to comply with CBR>40%) in layers and compacted to 98% Mod AASHTO density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc.
EXTERNAL WORKS
Keeping excavations free of water:
EXTERNAL WORKS
Keeping excavations free of all water other than subterranean water
EXTERNAL WORKS
25 MPa/19mm Unreinforced concrete:
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Brickwork of cement bricks (7 MPa nominal compressive strength) in Class I mortar:
EXTERNAL WORKS
One brick walls in foundations.
EXTERNAL WORKS
One brick wall.
EXTERNAL WORKS
Two brick walls batress in foundations.
EXTERNAL WORKS
Brickwork reinforcement:
4 142 20 m 4639 0.00 0.00 0.00
4 142 21 m 5567 0.00 0.00 0.00
4 142 0.00 0.00 0.00
4 142 22 m² 102 0.00 0.00 0.00
4 142 0.00 0.00 0.00
4 142 23 On walls. m² 2041 0.00 0.00 0.00
4 142 24 m² 102 0.00 0.00 0.00
4 142 0.00 0.00 0.00
4 142 25 m² 2134 0.00 0.00 0.00
4 142 0.00 0.00 0.00
4 142 0.00 0.00 0.00
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally.
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally in foundations.
EXTERNAL WORKS
Joint forming material in movement joints:
EXTERNAL WORKS
10mm Bitumen impregnated fibre board built in vertically between brick skins.
EXTERNAL WORKS
External cement plaster on brickwalls:
EXTERNAL WORKSEXTERNAL WORKS
On narrow widths.
EXTERNAL WORKS
Remove all loose particles and laitance and apply one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA (allow sufficient time for drying between coats).:
EXTERNAL WORKS
On external textured plaster walls.
EXTERNAL WORKS
THE FOLLOWING IN DRINKING FOUNTAIN
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
4 142 26 Trenches. m³ 4 0.00 0.00 0.00
4 142 0.00 0.00 0.00
4 142 27 m² 18 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 28 m³ 2 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 29 m³ 2 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 30 m² 4 0.00 0.00 0.00
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc
EXTERNAL WORKS
Filling with material supplied by the Contractor compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Under floors, pavings, etc.
EXTERNAL WORKS
Approved brand of weedkiller mixed with proved brand of anti-termite soil poison and applied in accordance with the manufacturer's instructions:
EXTERNAL WORKS
To bottoms and sides of trenches, etc.
4 143 0.00 0.00 0.00
4 143 31 No. 2 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 32 m³ 2 0.00 0.00 0.00
4 143 33 m³ 1 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 34 m³ 2 0.00 0.00 0.00
4 143 0.00 0.00 0.00
4 143 35 No. 16 0.00 0.00 0.00
4 144 0.00 0.00 0.00
4 144 36 m² 12 0.00 0.00 0.00
4 144 0.00 0.00 0.00
EXTERNAL WORKS
Precast concrete left rough from the mould including bedding, jointing and pointing:
EXTERNAL WORKS
1990mm Diameter concrete ring 465 mm wide x 150mm thick and with 100 x 75mm channel allround including necessary reinforcement.
EXTERNAL WORKS
20Mpa/19mm Concrete
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
25 MPa/19mm Concrete:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc.
EXTERNAL WORKS
100mm Diameter fibre cement pipe filled solid with 25 MPa/19mm Concrete:
EXTERNAL WORKS
Column 1340mm long.
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a wood float:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Smooth Formwork to Sides:
4 144 37 m 24 0.00 0.00 0.00
4 144 0.00 0.00 0.00
4 144 38 m² 4 0.00 0.00 0.00
4 144 0.00 0.00 0.00
4 144 39 m² 3 0.00 0.00 0.00
4 144 40 m² 2 0.00 0.00 0.00
4 144 41 m² 5 0.00 0.00 0.00
4 144 0.00 0.00 0.00
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide circular exceeding 1m radius.
EXTERNAL WORKS
Permanent formwork to Soffits left in place:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc. propped up not exceeding 1,5m high.
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar:
EXTERNAL WORKS
365mm Hollow walls of two half brick skins and cavity filled solid with hardcore filling no wire ties circular on plan in foundations.
EXTERNAL WORKS
One brick wall circular on plan.
EXTERNAL WORKS
Hollow walls of two half brick grilled skins and cavity filled with charcoal no wire ties circular on plan.
EXTERNAL WORKS
Metalwork Sundries:
4 144 42 No. 16 0.00 0.00 0.00
4 144 Wire Mesh 0.00 0.00 0.00
4 144 43 m² 13 0.00 0.00 0.00
4 144 0.00 0.00 0.00
4 144 44 On walls. m² 7 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 45 No. 2 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 46 No. 2 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 47 No. 16 0.00 0.00 0.00
4 145 0.00 0.00 0.00
EXTERNAL WORKS
1.5 x 19mm Flat metal ring 130mm diameter soldered to underside of water tray (water tray elsewhere measured.
EXTERNAL WORKS
EXTERNAL WORKS
Galvanised wire mesh with 6 x 6mm screen opening.
EXTERNAL WORKS
Cement plaster on brickwork:
EXTERNAL WORKSEXTERNAL WORKS
Galvanised sheet iron:
EXTERNAL WORKS
1.2mm Thick 1550mm Diameter tray 150mm deep including 2mm diameter holes drilled at 150mm centres in base.
EXTERNAL WORKS
Cobra Watertech' crutch handle and lockshield stopcocks:
EXTERNAL WORKS
15mm Rough brass F x F stoptap (code 121-15).
EXTERNAL WORKS
'Cobra Watertech' 'Demand' 'Mastermatic, etc. bibtaps:
EXTERNAL WORKS
15mm Rough brass 'Demand' bibtap (code KM2.203-15).
EXTERNAL WORKS
Class O copper pipes:
4 145 48 m 12 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 49 No. 50 0.00 0.00 0.00
4 145 0.00 0.00 0.00
4 145 50 No. 2 0.00 0.00 0.00
5 149 0.00 0.00 0.00
5 149 0.00 0.00 0.00
5 149 1 Item 1 0.00 0.00 0.00
5 149 2 Item 1 0.00 0.00 0.00
5 149 3 Item 1 0.00 0.00 0.00
5 149 0.00 0.00 0.00
5 149 0.00 0.00 0.00
5 149 4 Item 1 0.00 0.00 0.00
EXTERNAL WORKS
15mm Pipes.
EXTERNAL WORKS
Extra over class O copper pipes for capillary fittings:
EXTERNAL WORKS
15mm Fittings.
EXTERNAL WORKS
"Namibian Roto Mould" Plastic water tank:
EXTERNAL WORKS
1000l Water tank.
PROVISIONAL SUMS
JOINERY FITTINGS
PROVISIONAL SUMS
Joinery fittings:
PROVISIONAL SUMS
Provide the amount of N$60, 000. 00 (Sixty Thousand Namibian Dollars) for the replacement of all damagedJoinery Fittings and the supply and delivery of new Durashake cupboards.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
WATER RETICULATION SYSTEM:
PROVISIONAL SUMS
Upgrading Of Water Reticultion:
PROVISIONAL SUMS
Provide the amount of N$ 100,000.00 (One Hundred Thousand Namibian Dollars) for the upgrade of the water reticulation system.
5 149 5 Item 1 0.00 0.00 0.00
5 149 6 Item 1 0.00 0.00 0.00
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
Section Trade Page Item Description Uom Quantity Time Fixed Value
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
PRELIMINARIES
PREAMBLES FOR TRADES
PRELIMINARIES
The Model Preambles for Trades (2008 edition) as published by the Association of South African Quantity Surveyors shall be deemed to be incorporated in these bills of quantities and no claims arising from brevity of description of items fully described in
PRELIMINARIES
Supplementary preambles are incorporated in these bills of quantities to satisfy the requirements of this project. Such supplementary preambles shall take precedence over the provisions of the said Model Preambles
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 0.00 0.00 0.00
1 2 1 Item 1 0.00 0.00 0.00
1 2 2 Item 1 0.00 0.00 0.00
1 2 3 Item 1 0.00 0.00 0.00
1 2 4 Item 1 0.00 0.00 0.00
1 2 5 Item 1 0.00 0.00 0.00
1 2 6 Item 1 0.00 0.00 0.00
1 2 7 Item 1 0.00 0.00 0.00
1 3 8 Item 1 0.00 0.00 0.00
1 3 9 Item 1 0.00 0.00 0.00
1 3 10 Item 1 0.00 0.00 0.00
PRELIMINARIES
The contractor's prices for all items throughout these bills of quantities must take account of and include for all of the obligations, requirements and specifications given in the said Model Preambles and in any supplementary preambles
PRELIMINARIES
SECTION A - GENERAL CONDITIONS
PRELIMINARIES
1.0 - GENERAL PROVISIONS
PRELIMINARIES
Clause 1.1 - Definitions
PRELIMINARIES
Clause 1.2 - Interpretation
PRELIMINARIES
Clause 1.3 - Communications
PRELIMINARIES
Clause 1.4 - Law and Language
PRELIMINARIES
Clause 1.5 - Priority of Documents
PRELIMINARIES
Clause 1.6 - Contract Agreement
PRELIMINARIES
Clause 1.7 - Assigment
PRELIMINARIES
Clause 1.8 - Care and Supply of Documents
PRELIMINARIES
- Delayed Drawings or Instructions
PRELIMINARIES
Clause 1.10 - Employer's Use of Contractor's Documents
1 3 11 Item 1 0.00 0.00 0.00
1 3 12 Item 1 0.00 0.00 0.00
1 3 13 Item 1 0.00 0.00 0.00
1 3 14 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.11 - Contractor's Use of Employer's Documents
PRELIMINARIES
Clause 1.12 - Confidential Details
PRELIMINARIES
Clause 1.13 - Compliance with Laws
PRELIMINARIES
Clause 1.13 - Compliance with Laws[a]Contractor to comply with the Namibia Environmental Management Act No.7 of year 2007 as well as the Environmental Assessment Policy of year 1995 by implementing the Environmental Management Plans (EMP) documented se
1 3 15 Item 1 0.00 0.00 0.00
1 3 16 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 17 Item 1 0.00 0.00 0.00
1 4 18 Item 1 0.00 0.00 0.00
1 4 19 Item 1 0.00 0.00 0.00
1 4 20 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 21 Item 1 0.00 0.00 0.00
1 4 22 Item 1 0.00 0.00 0.00
1 4 23 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 1.13 - Compliance with Laws[b]Contractor to comply with the Namibia Public Health and Safety Management Policy under Act No. 11 of year 2007 by implementing the Public Health and Safety Awareness Plan (PHPSAP) documented separately as part of t
PRELIMINARIES
Clause 1.14 - Joint and Several Liability
PRELIMINARIES
2.0 - THE EMPLOYER
PRELIMINARIES
Clause 2.1 - Right of Access to the Site
PRELIMINARIES
Clause 2.2 - Permits, Licences or Approvals
PRELIMINARIES
Clause 2.3 - Employer's Personnel
PRELIMINARIES
Clause 2.4 - Employer's Financial Arrangement
PRELIMINARIES
3.0 - THE ENGINEER
PRELIMINARIES
Clause 3.1 - Engineer's Duties and Authority
PRELIMINARIES
Clause 3.2 - Delegation by the Engineer
PRELIMINARIES
Clause 3.3 - Instructions of the Engineer
1 4 24 Item 1 0.00 0.00 0.00
1 4 25 Item 1 0.00 0.00 0.00
1 4 0.00 0.00 0.00
1 4 26 Item 1 0.00 0.00 0.00
1 4 27 Item 1 0.00 0.00 0.00
1 4 28 Item 1 0.00 0.00 0.00
1 5 29 Item 1 0.00 0.00 0.00
1 5 30 Item 1 0.00 0.00 0.00
1 5 31 Item 1 0.00 0.00 0.00
1 5 32 Item 1 0.00 0.00 0.00
1 5 33 Item 1 0.00 0.00 0.00
1 5 34 Item 1 0.00 0.00 0.00
1 5 35 Item 1 0.00 0.00 0.00
1 5 36 Item 1 0.00 0.00 0.00
1 5 37 Item 1 0.00 0.00 0.00
1 5 38 Item 1 0.00 0.00 0.00
1 5 39 Item 1 0.00 0.00 0.00
1 5 40 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 3.4 - Replacement of the Engineer
PRELIMINARIES
Clause 3.5 - Determinations
PRELIMINARIES
4.0 - THE CONTRACTOR
PRELIMINARIES
Clause 4.1 - Contractor's General Obligations
PRELIMINARIES
Clause 4.2 - Performance Security
PRELIMINARIES
Clause 4.3 - Contactor's Security
PRELIMINARIES
Clause 4.4 - Subcontractors
PRELIMINARIES
Clause 4.5 - Assignment of Bennefit of Subcontract
PRELIMINARIES
Clause 4.6 - Co-operation
PRELIMINARIES
Clause 4.7 - Setting Out
PRELIMINARIES
Clause 4.8 - Safety Procedures
PRELIMINARIES
Clause 4.9 - Quality Assurance
PRELIMINARIES
Clause 4.10 - Site Data
PRELIMINARIES
Clause 4.11 - Sufficiency of the Accepted Contract Amount
PRELIMINARIES
Clause 4.12 - Unforseeable Physical Conditions
PRELIMINARIES
Clause 4.13 - Rights of Way and Facilities
PRELIMINARIES
Clause 4.14 - Avoidance of Interference
PRELIMINARIES
Clause 4.15 - Access Route
1 5 41 Item 1 0.00 0.00 0.00
1 6 42 Item 1 0.00 0.00 0.00
1 6 43 Item 1 0.00 0.00 0.00
1 6 44 Item 1 0.00 0.00 0.00
1 6 45 Item 1 0.00 0.00 0.00
1 6 46 Item 1 0.00 0.00 0.00
1 6 47 Item 1 0.00 0.00 0.00
1 6 48 Item 1 0.00 0.00 0.00
1 6 49 Item 1 0.00 0.00 0.00
1 6 0.00 0.00 0.00
1 6 50 Item 1 0.00 0.00 0.00
1 6 51 Item 1 0.00 0.00 0.00
1 6 52 Item 1 0.00 0.00 0.00
1 6 53 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
PRELIMINARIES
Clause 4.16 - Transport of Goods
PRELIMINARIES
Clause 4.17 - Contractor's Equipment
PRELIMINARIES
4.18 - Protection of the Enviroment
PRELIMINARIES
Clause 4.19 - Electricity, Water and Gas
PRELIMINARIES
Clause 4.20 - Employer's Equipment and Free-Issue Material
PRELIMINARIES
Clause 4.21 - Progress Reports
PRELIMINARIES
Clause 4.22 - Security of the Site
PRELIMINARIES
Clause 4.23 - Contractor's Operations on Site
PRELIMINARIES
Clause 4.24 - Fossils
PRELIMINARIES
5.0 - NOMINATED SUBCONTRACTORS
PRELIMINARIES
- Definition of "nominated Subcontractor"
PRELIMINARIES
Clause 5.2 - Objection to Nomination
PRELIMINARIES
Clause 5.3 - Payments to nominated Subcontractors
PRELIMINARIES
Clause 5.4 - Evidence of Payments
PRELIMINARIES
6.0 - STAFF AND LABOUR
1 7 54 Item 1 0.00 0.00 0.00
1 7 55 Item 1 0.00 0.00 0.00
1 7 56 Item 1 0.00 0.00 0.00
1 7 57 Item 1 0.00 0.00 0.00
1 7 58 Item 1 0.00 0.00 0.00
1 7 59 Item 1 0.00 0.00 0.00
1 7 60 Item 1 0.00 0.00 0.00
1 7 61 Item 1 0.00 0.00 0.00
1 7 62 Item 1 0.00 0.00 0.00
1 7 63 Item 1 0.00 0.00 0.00
1 7 64 Item 1 0.00 0.00 0.00
1 7 0.00 0.00 0.00
1 7 65 Item 1 0.00 0.00 0.00
1 8 66 Item 1 0.00 0.00 0.00
1 8 67 Item 1 0.00 0.00 0.00
1 8 68 Item 1 0.00 0.00 0.00
1 8 69 Item 1 0.00 0.00 0.00
1 8 70 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 6.1 - Engagement of Staff and Labour
PRELIMINARIES
Clause 6.2 - Rates of Wages and Conditions of Labour
PRELIMINARIES
Clause 6.3 - Persons in the Service of Employer
PRELIMINARIES
Clause 6.4 - Labour Laws
PRELIMINARIES
Clause 6.5 - Working Hours
PRELIMINARIES
Clause 6.6 - Facilities for Staff and Labour
PRELIMINARIES
Clause 6.7 - Health and Safety
PRELIMINARIES
Clause 6.8 - Contractor's Superintendence
PRELIMINARIES
Clause 6.9 - Contractor's Personnel
PRELIMINARIES
Clause 6.10 - Records of Contractor's Personnel and Equipment
PRELIMINARIES
Clause 6.11 - Disorderly Conduct
PRELIMINARIES
7.0 - PLANT, MATERIALS AND WORKMANSHIP
PRELIMINARIES
Clause 7.1 - Manner of Execution
PRELIMINARIES
Clause 7.2 - Samples
PRELIMINARIES
Clause 7.3 - Inspection
PRELIMINARIES
Clause 7.4 - Testing
PRELIMINARIES
Clause 7.5 - Rejection
PRELIMINARIES
Clause 7.6 - Remedial Work
1 8 71 Item 1 0.00 0.00 0.00
1 8 72 Item 1 0.00 0.00 0.00
1 8 0.00 0.00 0.00
1 8 73 Item 1 0.00 0.00 0.00
1 8 74 Item 1 0.00 0.00 0.00
1 8 75 Item 1 0.00 0.00 0.00
1 8 76 Item 1 0.00 0.00 0.00
1 8 77 Item 1 0.00 0.00 0.00
1 8 78 Item 1 0.00 0.00 0.00
1 9 79 Item 1 0.00 0.00 0.00
1 9 80 Item 1 0.00 0.00 0.00
1 9 81 Item 1 0.00 0.00 0.00
1 9 82 Item 1 0.00 0.00 0.00
1 9 83 Item 1 0.00 0.00 0.00
1 9 84 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 85 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 7.7 - Ownership of Plant and Material
PRELIMINARIES
Clause 7.8 - Royalties
PRELIMINARIES
8.0 - COMMENCEMENT, DELAYS AND SUSPENSION
PRELIMINARIES
Clause 8.1 - Commencement of Works
PRELIMINARIES
Clause 8.2 - Time for Completion
PRELIMINARIES
- Programme
PRELIMINARIES
Clause 8.4 - Extension of Time for Completion
PRELIMINARIES
Clause 8.5 - Delays cuased by Authorities
PRELIMINARIES
Clause 8.6 - Rate of Progress
PRELIMINARIES
Clause 8.7 - Delay Damages
PRELIMINARIES
Clause 8.8 - Suspension of Work
PRELIMINARIES
Clause 8.9 - Consequences of Suspension
PRELIMINARIES
Clause 8.10 - Payment for Plant and Materials in Event of Suspension
PRELIMINARIES
Clause 8.11 - Prolonged Suspension
PRELIMINARIES
Clause 8.12 - Resumption of Work
PRELIMINARIES
9.0 - TESTS ON COMPLETION
PRELIMINARIES
- Contractor's Obligation
1 9 86 Item 1 0.00 0.00 0.00
1 9 87 Item 1 0.00 0.00 0.00
1 9 88 Item 1 0.00 0.00 0.00
1 9 0.00 0.00 0.00
1 9 89 Item 1 0.00 0.00 0.00
1 9 90 Item 1 0.00 0.00 0.00
1 10 91 Item 1 0.00 0.00 0.00
1 10 92 Item 1 0.00 0.00 0.00
1 10 0.00 0.00 0.00
1 10 93 Item 1 0.00 0.00 0.00
1 10 94 Item 1 0.00 0.00 0.00
1 10 95 Item 1 0.00 0.00 0.00
1 10 96 Item 1 0.00 0.00 0.00
1 10 97 Item 1 0.00 0.00 0.00
1 10 98 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 9.2 - Delayed Tests
PRELIMINARIES
Clause 9.3 - Retesting
PRELIMINARIES
Clause 9.4 - Failure to Pass Tests on Completion
PRELIMINARIES
10.0 - EMPLOYER'S TAKING OVER
PRELIMINARIES
Clause 10.1 - Taking Over of the Works and Sections
PRELIMINARIES
Clause 10.2 - Taking Over of Parts of the Works
PRELIMINARIES
Clause 10.3 - Interference with Tests on Completion
PRELIMINARIES
Clause 10.4 - Surfaces Requiring Reinstatement
PRELIMINARIES
11.0 - DEFECTS LIABILITY
PRELIMINARIES
Clause 11.1 - Completion of Outstandin g Work and Remedying Defects
PRELIMINARIES
Clause 11.2 - Cost of Remedying Defects
PRELIMINARIES
Clause 11.3 - Extension of Defects Notification Period
PRELIMINARIES
Clause 11.4 - Failure to Remedy Defects
PRELIMINARIES
Clause 11.5 - Removal of Defective Work
PRELIMINARIES
Clause 11.6 - Further Tests
1 10 99 Item 1 0.00 0.00 0.00
1 10 100 Item 1 0.00 0.00 0.00
1 10 101 Item 1 0.00 0.00 0.00
1 10 102 Item 1 0.00 0.00 0.00
1 10 103 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 104 Item 1 0.00 0.00 0.00
1 11 105 Item 1 0.00 0.00 0.00
1 11 106 Item 1 0.00 0.00 0.00
1 11 107 Item 1 0.00 0.00 0.00
1 11 0.00 0.00 0.00
1 11 108 Item 1 0.00 0.00 0.00
1 11 109 Item 1 0.00 0.00 0.00
1 11 110 Item 1 0.00 0.00 0.00
1 11 111 Item 1 0.00 0.00 0.00
1 11 112 Item 1 0.00 0.00 0.00
1 11 113 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 11.7 - Right of Access
PRELIMINARIES
Clause 11.8 - Contractor to Search
PRELIMINARIES
Clause 11.9 - Performance Certificate
PRELIMINARIES
Clause 11.10 - Unfulfilled Obligations
PRELIMINARIES
Clause 11.11 - Clearance of Site
PRELIMINARIES
12.0 - MEASUREMENT AND EVALUATION LIABILITY
PRELIMINARIES
Clause 12.1 - Works to be Measured
PRELIMINARIES
Clause 12.2 - Method of Measurement
PRELIMINARIES
Clause 12.3 - Evaluation
PRELIMINARIES
Clause 12.4 - Ommisions
PRELIMINARIES
13.0 - VARIATIONS AND ADJUSTMENTS
PRELIMINARIES
Clause 13.1 - Right to Vary
PRELIMINARIES
13.2 - Value Engineering
PRELIMINARIES
Clause 13.3 - Variation Procedure
PRELIMINARIES
Clause 13.4 - Payment in Applicable Currencies
PRELIMINARIES
Clause 13.5 - Provisional Sums
PRELIMINARIES
Clause 13.6 - Daywork
1 11 114 Item 1 0.00 0.00 0.00
1 11 115 Item 1 0.00 0.00 0.00
1 12 0.00 0.00 0.00
1 12 116 Item 1 0.00 0.00 0.00
1 12 117 Item 1 0.00 0.00 0.00
1 12 118 Item 1 0.00 0.00 0.00
1 12 119 Item 1 0.00 0.00 0.00
1 12 120 Item 1 0.00 0.00 0.00
1 12 121 Item 1 0.00 0.00 0.00
1 12 122 Item 1 0.00 0.00 0.00
1 12 123 Item 1 0.00 0.00 0.00
1 12 124 Item 1 0.00 0.00 0.00
1 12 125 Item 1 0.00 0.00 0.00
1 12 126 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 13.7 - Adjustments for Changes in Legislation
PRELIMINARIES
Clause 13.8 - Adjustments for Changes in Cost
PRELIMINARIES
14.0 - CONTRACT PRICE AND PAYMENTS
PRELIMINARIES
Clause 14.1 - The Contract Price
PRELIMINARIES
Clause 14.2 - Advance Payment
PRELIMINARIES
Clause 14.3 - Application for Iterim Payment Certificates
PRELIMINARIES
Clause 14.4 - Schedule of Payments
PRELIMINARIES
Clause 14.5 - Plant and Materials Intended for the Works
PRELIMINARIES
Clause 14.6 - Issue of Interim Payment Certificates
PRELIMINARIES
Clause 14.7 - Payment
PRELIMINARIES
Clause 14.8 - Delayed Payment
PRELIMINARIES
Clause 14.9 - Payment of Retention Money
PRELIMINARIES
Clause 14.10 - Statement at Completion
PRELIMINARIES
Clause 14.11 - Application for Final Payment Certificate
1 12 127 Item 1 0.00 0.00 0.00
1 12 128 Item 1 0.00 0.00 0.00
1 13 129 Item 1 0.00 0.00 0.00
1 13 130 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 131 Item 1 0.00 0.00 0.00
1 13 132 Item 1 0.00 0.00 0.00
1 13 133 Item 1 0.00 0.00 0.00
1 13 134 Item 1 0.00 0.00 0.00
1 13 135 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 136 Item 1 0.00 0.00 0.00
1 13 137 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 14.12 - Discharge
PRELIMINARIES
Clause 14.13 - Issue of Final Payment Certificate
PRELIMINARIES
Clause 14.14 - Cessation of Employer's Liability
PRELIMINARIES
Clause 14.15 - Currencies of Payment
PRELIMINARIES
15.0 - TERMINATION BY EMPLOYER
PRELIMINARIES
Clause 15.1 - Notice to Correct
PRELIMINARIES
Clause 15.2 - Termination by Employer
PRELIMINARIES
15.3 - Valuation at Date of Termination
PRELIMINARIES
15.4 - Payment after Termination
PRELIMINARIES
15.5 - Empoyer's Entitlement to Termination
PRELIMINARIES
16.0 - SUPSENSION AND TERMINATION BY CONTRACTOR
PRELIMINARIES
Clause 16.1 - Contractor's Entitlement to Suspend Work
PRELIMINARIES
Clause 16.2 - Termination by Contractor
1 13 138 Item 1 0.00 0.00 0.00
1 13 139 Item 1 0.00 0.00 0.00
1 13 0.00 0.00 0.00
1 13 140 Item 1 0.00 0.00 0.00
1 14 141 Item 1 0.00 0.00 0.00
1 14 142 Item 1 0.00 0.00 0.00
1 14 143 Item 1 0.00 0.00 0.00
1 14 144 Item 1 0.00 0.00 0.00
1 14 145 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 146 Item 1 0.00 0.00 0.00
1 14 147 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 16.3 - Cessasion of Work and Removal of Contractor's Equipment
PRELIMINARIES
16.4 - Payment on Termination
PRELIMINARIES
17.0 - RISK AND RESPONSIBILITY
PRELIMINARIES
Clause 17.1 - Indemnities
PRELIMINARIES
Clause 17.2 - Contractor's Care of the Works
PRELIMINARIES
Clause 17.3 - Employer's Risks
PRELIMINARIES
Clause 17.4 - Consequences of Employer's Risks
PRELIMINARIES
Clause 17.5 - Intellectual and Industrial Property Rights
PRELIMINARIES
Clause 17.6 - Limitation of Liability
PRELIMINARIES
18.0 - INSURANCE
PRELIMINARIES
Clause 18.1 - General Requierments for Insurances
PRELIMINARIES
Clause 18.2 - Insurance for Works and Contractor's Equipment
1 14 148 Item 1 0.00 0.00 0.00
1 14 149 Item 1 0.00 0.00 0.00
1 14 0.00 0.00 0.00
1 14 150 Item 1 0.00 0.00 0.00
1 14 151 Item 1 0.00 0.00 0.00
1 14 152 Item 1 0.00 0.00 0.00
1 15 153 Item 1 0.00 0.00 0.00
1 15 154 Item 1 0.00 0.00 0.00
1 15 155 Item 1 0.00 0.00 0.00
1 15 156 Item 1 0.00 0.00 0.00
1 15 0.00 0.00 0.00
1 15 157 Item 1 0.00 0.00 0.00
PRELIMINARIES
Clause 18.3 - Insurance against Injury to Persons and Damage to Property
PRELIMINARIES
Clause 18.4 - Insurance for Contractor's Personnel
PRELIMINARIES
19.0 - FORCE MAJEURE
PRELIMINARIES
Clause 19.1 - Definition of Force Majuere
PRELIMINARIES
Clause 19.2 - Notice of Force Majuere
PRELIMINARIES
Clause 19.3 - Duty to Minimise Delay
PRELIMINARIES
Clause 19.4 - Consequences of Force Majuere
PRELIMINARIES
Clause 19.5 - Force Majuere Affecting Subcontractor
PRELIMINARIES
Clause 19.6 - Optional Termination, Payment and Release
PRELIMINARIES
Clause 19.7 - Release from Performance under the Law
PRELIMINARIES
20.0 - CLAIMS, DISPUTES AND ARBITRATION
PRELIMINARIES
Clause 20.1 - Contractors Claim
1 15 158 Item 1 0.00 0.00 0.00
1 15 159 Item 1 0.00 0.00 0.00
1 15 160 Item 1 0.00 0.00 0.00
1 15 161 Item 1 0.00 0.00 0.00
1 15 162 Item 1 0.00 0.00 0.00
1 15 163 Item 1 0.00 0.00 0.00
1 15 164 Item 1 0.00 0.00 0.00
1 16 0.00 0.00 0.00
PRELIMINARIES
Clause 20.2 - Appointment of the Dispute Adjudication Board
PRELIMINARIES
Clause 20.3 - Failire to Agree Dispute Adjudication Board
PRELIMINARIES
Clause 20.4 - Obtaining Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.5 - Amicable Settlement
PRELIMINARIES
Clause 20.6 - Arbitration
PRELIMINARIES
Clause 20.7 - Failure to Comply Dispute Adjudication Board's Decision
PRELIMINARIES
Clause 20.8 - Expiry of Dispute Adjudication Board's Appointment
PRELIMINARIES
SECTION B - MODEL PRELIMINARIES
1 16 0.00 0.00 0.00
1 16 0.00 0.00 0.00
1 16 165 Item 1 0.00 0.00 0.00
1 16 166 Item 1 0.00 0.00 0.00
PRELIMINARIES
Model Preliminary Document can be purchased from the Institute of Namibian Quantity Surveyor's offices situated at 22 Stein Street, Klein Windhoek, Windhoek during week days from 8H00 to 12H00.
All references in this document made to "the Architect" wi
PRELIMINARIES
B1: Supplementary Documentation
PRELIMINARIES
B1.1: Bills of Quantities
These Bills of Quantities contain pages and annexures as indexed on the flyleaf.
These Bills of Quantities are consecutively numbered and the Tenderer is required to check the number of pages and should any be found missing
PRELIMINARIES
B1.2: Provisional Bills of Quantities
1 16 167 Item 1 0.00 0.00 0.00
1 17 168 Item 1 0.00 0.00 0.00
1 17 169 Item 1 0.00 0.00 0.00
1 17 170 Item 1 0.00 0.00 0.00
1 17 171 Item 1 0.00 0.00 0.00
1 17 172 Item 1 0.00 0.00 0.00
1 17 173 Item 1 0.00 0.00 0.00
1 17 174 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.3: Availability of Construction Documentation for contracts based on Provisional Bills of Quantities
PRELIMINARIES
B1.4: Name of Architect, Quantity Surveyor and Specialist Consultants
Refer to the Appedix To Tender
PRELIMINARIES
B1.5: Lodging and Scrutiny of priced Bills of Quantities.
These Bills of Quantities must be extended in black ink.
PRELIMINARIES
B1.6: Meaning of Words
PRELIMINARIES
B1.7: Performance Guarantee by Contractor
PRELIMINARIES
B1.8: Payment Guarantee by Employer
PRELIMINARIES
B1.9: Waiver of Contractor's Lien
PRELIMINARIES
B1.10: Signing powers
1 17 175 Item 1 0.00 0.00 0.00
1 17 176 Item 1 0.00 0.00 0.00
1 18 B2 The Site 0.00 0.00 0.00
1 18 177 Item 1 0.00 0.00 0.00
PRELIMINARIES
B1.11: Tenders
Notwithstanding anything contained in this clause, tenders shall be valid for a period as stipulated in the separate Bid Invitation Documents, from the closing date of tenders.
The Employer reserves the right to correct any arithmetic
PRELIMINARIES
B1.12: Inspection of Documents
PRELIMINARIES
PRELIMINARIES
B2.1: Site and Bounderies
The sites will be as indicated on the site plans in the Bidding Documents.
1 18 178 Item 1 0.00 0.00 0.00
1 18 179 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.2: Area of the Works
The Area of the Works to be occupied by the Contractor, any restriction on the area and the limit of access or exit will be pointed out to the Contractor by the Engineer on handing over of the Site.
PRELIMINARIES
B2.3: Boundary Beacons, setting-out pegs and master datum
The Contractor shall notify the Engineer if any encroachments of adjoining foundations, buildings, structures, pavements, etc., exist so that the necessary arrangements can be made for the rect
1 18 180 Item 1 0.00 0.00 0.00
1 18 181 Item 1 0.00 0.00 0.00
1 18 182 Item 1 0.00 0.00 0.00
1 18 183 Item 1 0.00 0.00 0.00
1 19 184 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.4: Site soil investigation
No site soil investigation report is available and the Tenderer is advised to inspect the site to ascertain the exact nature of the ground and report to the Engineer.
PRELIMINARIES
B2.5 : Viewing of the Site
No claims for extras arising from the Contractor having failed to comply with this Clause will be entertained.
PRELIMINARIES
B2.6: Existing premises occupied
PRELIMINARIES
B2.7: Dimensional accuracy of work executed under the previous contract
PRELIMINARIES
B2.8: Patent Defects in work executed under the previous contract
1 19 185 Item 1 0.00 0.00 0.00
1 19 186 Item 1 0.00 0.00 0.00
1 19 187 Item 1 0.00 0.00 0.00
1 19 188 Item 1 0.00 0.00 0.00
1 19 189 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 190 Item 1 0.00 0.00 0.00
1 19 191 Item 1 0.00 0.00 0.00
1 19 192 Item 1 0.00 0.00 0.00
1 19 193 Item 1 0.00 0.00 0.00
1 19 0.00 0.00 0.00
1 19 194 Item 1 0.00 0.00 0.00
PRELIMINARIES
B2.9: Existing known services
Existing services and points of connection are shown on the Site plan or will be pointed out on the Site by the Engineer.
PRELIMINARIES
B2.10: Unknown Services
PRELIMINARIES
B2.11: Protection of trees
PRELIMINARIES
B2.12: Articles of Value
PRELIMINARIES
B2.13: Inspection of nearby properties etc.
PRELIMINARIES
B3 Management of Contract
PRELIMINARIES
B3.1: Management of Works
PRELIMINARIES
B3.2: Programming of The Works
The Contract shall be programmed by the Contractor in accordance with Alternative A
PRELIMINARIES
B3.3: Progress Meetings
PRELIMINARIES
B3.4: Technical Meetings
PRELIMINARIES
B4: Materials and Workmanship
PRELIMINARIES
B4.1: Samples of materials
1 20 195 Item 1 0.00 0.00 0.00
1 20 196 Item 1 0.00 0.00 0.00
1 20 0.00 0.00 0.00
1 20 197 Item 1 0.00 0.00 0.00
1 20 198 Item 1 0.00 0.00 0.00
1 20 199 Item 1 0.00 0.00 0.00
1 20 200 Item 1 0.00 0.00 0.00
1 20 201 Item 1 0.00 0.00 0.00
1 20 202 Item 1 0.00 0.00 0.00
PRELIMINARIES
B4.2: Samples of workmanship and mockups
PRELIMINARIES
B4.3: Ordering of materials
PRELIMINARIES
B5: Temporary Works and Plant
PRELIMINARIES
B5.1: Deposits and Fees
PRELIMINARIES
B5.2: Enclosure of Works
PRELIMINARIES
B5.3: Pavement crossings and parking meters
PRELIMINARIES
B5.4: Advertising
PRELIMINARIES
B5.5: Plant and Equipment
PRELIMINARIES
B5.6: Special Scaffolding
No special scaffolding is measured as these Bills of Quantities are based on the Sixth edition of the Standard System for Measuring Building Work.
1 20 203 Item 1 0.00 0.00 0.00
1 20 204 Item 1 0.00 0.00 0.00
1 20 205 Item 1 0.00 0.00 0.00
1 21 206 Item 1 0.00 0.00 0.00
1 21 207 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 208 Item 1 0.00 0.00 0.00
PRELIMINARIES
B5.7: Contractor's Offices and Sheds
Under NO circumstances may any of the buildings at any stage be used for temporary accommodation for workers, contractor's offices or the storage of materials.
PRELIMINARIES
B5.8: Offices
PRELIMINARIES
B5.9: Office of the Clerk of Works
PRELIMINARIES
B5.10: Main Noticeboard
PRELIMINARIES
B5.11: Subcontractors' Noticeboard
PRELIMINARIES
B6: Temporary Services
PRELIMINARIES
B6.1: Water
The contractor shall provide water for The Works in accordance with Alternative A
1 21 209 Item 1 0.00 0.00 0.00
1 21 210 Item 1 0.00 0.00 0.00
1 21 211 Item 1 0.00 0.00 0.00
1 21 0.00 0.00 0.00
1 21 212 Item 1 0.00 0.00 0.00
PRELIMINARIES
B6.2: Electricity and Lighting
The contractor shall provide electricity and lighting for The Works in accordance with Alternative A
PRELIMINARIES
B6.3: Telephones
The contractor shall provide telephones for the Works in accordance with Alternative A
PRELIMINARIES
B6.4: Toilets
The contractor shall provide toilets for The Works in accordance with Alternative A
PRELIMINARIES
B7: Prime Cost and Provisional Amounts
PRELIMINARIES
B7.1: Cash Discount
All Prime Cost and Provisional Sums are net and do not include a cash discount, nor will the Contractor be allowed or entitled to a cash discount.
1 21 213 Item 1 0.00 0.00 0.00
1 22 214 Item 1 0.00 0.00 0.00
1 22 215 Item 1 0.00 0.00 0.00
1 22 216 Item 1 0.00 0.00 0.00
1 22 0.00 0.00 0.00
1 22 217 Item 1 0.00 0.00 0.00
1 22 218 N/A 1 0.00 0.00 0.00
PRELIMINARIES
B7.2: Taking delivery and fixing of prime cost items
PRELIMINARIES
B7.3: Nominated or Selected Subcontract Documents
PRELIMINARIES
B7.4: Attendance on Nominated or Selected Subcontractors
PRELIMINARIES
B7.5: Fuel, power and water for commissioning of mechanical and other specialised installations
PRELIMINARIES
B8: Financial Aspects
PRELIMINARIES
B8.1: Sales Taxes
Delete the whole of this clause and replace with the following:
B8.1: Taxes, etc.
Provision is made in the separate Bid Invitation Documents for the inclusion of Value Added Tax (VAT) at 15%. The Contractor shall price these B
PRELIMINARIES
B8.2: Contract price adjusment provisions
1 22 219 Item 1 0.00 0.00 0.00
1 22 220 Item 1 0.00 0.00 0.00
1 23 221 Item 1 0.00 0.00 0.00
1 23 222 N/A 1 0.00 0.00 0.00
1 23 223 Item 1 0.00 0.00 0.00
PRELIMINARIES
B8.3: Payment of Preliminaries
Payment of Preliminaries will be calculated from the priced items within the Preliminaries in accordance with Alternative B
In addition to the exclusions mentioned in the third paragraph of this clause it shall be deem
PRELIMINARIES
B8.4: Adjustment of Preliminaries
The Adjustment of Preliminaries will be on the basis of fixed price, value related and time related items in accordance with Method 3.
In addition to the exclusions mentioned in the this paragraph of this clause it
PRELIMINARIES
B8.5: Certificate payment projection
PRELIMINARIES
B8.6: Dayworks
PRELIMINARIES
B8.7: Information supplied by Contractor
1 23 0.00 0.00 0.00
1 23 224 Item 1 0.00 0.00 0.00
1 23 225 Item 1 0.00 0.00 0.00
1 23 226 Item 1 0.00 0.00 0.00
1 23 227 Item 1 0.00 0.00 0.00
1 23 228 Item 1 0.00 0.00 0.00
1 23 229 Item 1 0.00 0.00 0.00
1 23 230 Item 1 0.00 0.00 0.00
1 23 231 Item 1 0.00 0.00 0.00
1 24 232 Item 1 0.00 0.00 0.00
1 24 233 Item 1 0.00 0.00 0.00
1 24 0.00 0.00 0.00
1 24 234 Item 1 0.00 0.00 0.00
PRELIMINARIES
B9: General
PRELIMINARIES
B9.1: Protection
PRELIMINARIES
B9.2: Protection of existing and/or partially occupied works.
PRELIMINARIES
B9.3: Safety
PRELIMINARIES
B9.4: Site security
PRELIMINARIES
B9.5: Notice before covering work
PRELIMINARIES
B9.6: Disturbance
PRELIMINARIES
B9.7: Clearing and cleaning
PRELIMINARIES
B9.8: Vermin
PRELIMINARIES
B9.9: Overhand Work
PRELIMINARIES
B9.10: Jobbing
PRELIMINARIES
SECTION C - SPECIFIC PRELIMINARIES
PRELIMINARIES
Site instructions
Instructions issued on site are to be recorded in triplicate in a site instruction book which is to be maintained on site by the contractor
1 24 235 Item 1 0.00 0.00 0.00
1 24 236 Item 1 0.00 0.00 0.00
PRELIMINARIES
Warranties for material and workmanship
Where warranties for materials and/or workmanship are called for, the contractor shall obtain a written warranty, addressed to the employer, from the firm supplying the materials and/or doing the work and shall d
PRELIMINARIES
Co-operation of contractor for cost management
It is specifically agreed that the contractor accepts the obligation of assisting the engineer in implementing proper cost management. The contractor will be advised by the engineer of all cost management
1 25 237 Item 1 0.00 0.00 0.00
1 25 238 Item 1 0.00 0.00 0.00
PRELIMINARIES
Testing of windows for watertightness
Each window shall be tested for watertightness with water sprayed on using adequate pressure. If in the opinion of the engineer, the pressure proves to be inadequate, then the pressure shall be boosted by means of
PRELIMINARIES
Revenue Stamps
The Contractor must allow for and provide all necessary revenue stamps require.
1 25 239 Item 1 0.00 0.00 0.00
1 25 240 Item 1 0.00 0.00 0.00
PRELIMINARIES
Proprietary Branded Products.
The Contractor shall take delivery of, handle, store, use, apply and/or fix all proprietary branded products in strict accordance with the manufacturers' instructions after consultation with the manufacturer's authorised r
PRELIMINARIES
Non-Cession of Monies
The Contractor shall not cede nor assign his rights or claims to any monies due or to become due under this contract.
1 25 241 Item 1 0.00 0.00 0.00
1 25 242 Item 1 0.00 0.00 0.00
PRELIMINARIES
As Built Drawings
The position of construction breaks and the extent of individual concrete pours are to be recorded by the Contractor on the Structural Engineer's drawings and are to be submitted to the Architect and the Structural Engineer for their
PRELIMINARIES
Social Security
The contractor shall provide for and effect Social Security for all his/her employees on the works in respect of the Social Security Act and will also instruct all his sub-contractors to do the same.
1 26 243 Item 1 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
PRELIMINARIES
nt of Namibian People
The contractor is encouraged to employ Namibian citizens for skilled and semi skilled artisans and employ unskilled labour from the area of interventions.
All Namibian skilled artisans and Namibian unskilled employees a
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 30 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
All work is deemed to be in patches and prices are to include therefor.
ALTERATIONS
Disposal of debris, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 0.00 0.00 0.00
2 31 1 m³ 106 0.00 0.00 0.00
2 32 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
Steps and pavers
ALTERATIONS
Taking out and removing doors, windows, etc including thresholds, sills, etc and building up openings in one brick walls, including making good cement plaster and paintwork on both sides:
2 32 2 No. 1 0.00 0.00 0.00
2 32 3 No. 8 0.00 0.00 0.00
2 32 4 No. 2 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 5 No. 30 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 6 m² 993 0.00 0.00 0.00
ALTERATIONS
Steel screen gate and frame 813 x 2031mm high overall from one brickwall.
ALTERATIONS
Timber single door and frame 813 x 2031mm high overall from one brickwall.
ALTERATIONS
Timber double door and frame 1220 x 2031mm high overall from one brickwall.
ALTERATIONS
Taking out and removing doors, screen gates, etc including thresholds, sills, etc in half brick walls including making good cement plaster and paintwork on both sides:
ALTERATIONS
Timber single door and frame 813 x 2031mm high overall from half brickwall.
ALTERATIONS
Taking down and removing roofs, floors, panelling, ceilings, partitions, etc:
ALTERATIONS
Nailed up celotex ceilings.
2 32 0.00 0.00 0.00
2 32 7 m 290 0.00 0.00 0.00
2 32 8 m 290 0.00 0.00 0.00
2 32 9 No. 10 0.00 0.00 0.00
2 32 0.00 0.00 0.00
2 32 10 No. 28 0.00 0.00 0.00
2 33 11 No. 10 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 12 m² 25 0.00 0.00 0.00
ALTERATIONS
Taking out and removing sundry joinery work:
ALTERATIONS
Timber cornices from brickwork.
ALTERATIONS
Timber skirtings from brickwork.
ALTERATIONS
'Flortime' pinning board model 2300 code: '2309', size 2,400 x 1,200mm.
ALTERATIONS
Taking out and removing ironmongery:
ALTERATIONS
lock and striking plate from timber door and timberl frame.
ALTERATIONS
Green writing board and chalk rail 1,800 x 1,200mm high.
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and preparing surfaces for new screeds, plaster, etc:
ALTERATIONS
Plasters from walls or columns in patches.
2 33 0.00 0.00 0.00
2 33 13 m² 1192 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 14 m² 640 0.00 0.00 0.00
2 33 0.00 0.00 0.00
2 33 15 No. 30 0.00 0.00 0.00
2 33 16 No. 5 0.00 0.00 0.00
ALTERATIONS
Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and bush hummering surfaces to receive new screeds, plaster, etc:
ALTERATIONS
50mm Screed from floors (internal and external).
ALTERATIONS
Hacking up/off and removing vinyl tiles from concrete floor bush hummering surfaces to receive new ceramic tiles etc:
ALTERATIONS
30 x 30 x 3mm tiles to floors
ALTERATIONS
Taking out and removing piping, sanitary fittings, etc including disconnecting piping from fittings and making good floor and wall finishes (making good tiling and paintwork elsewhere):
ALTERATIONS
Broken polyethylene low level WC.
ALTERATIONS
Broken vitreous china WHB
2 33 0.00 0.00 0.00
2 33 17 m² 8 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 18 Item 1 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 19 m² 17 0.00 0.00 0.00
2 34 20 m² 6 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 0.00 0.00 0.00
2 34 21 m² 22 0.00 0.00 0.00
2 34 0.00 0.00 0.00
ALTERATIONS
Taking out and removing broken glass from windows/door panes and mirrors:
ALTERATIONS
Broken glass from steel windows including cleaning out rebates and preparing for new glass.
ALTERATIONS
Charts and learning material on walls
ALTERATIONS
Allow for removal of learning charts and material ( and putting back thereafter), from walls and pinning boards so as to expose surfaces to be painted.
ALTERATIONS
BUILDING UP OPENINGS
ALTERATIONS
Brickwork in cement bricks [7 Mpa] in class I mortar in building up:
ALTERATIONS
Half brick walls.
ALTERATIONS
One brick walls.
ALTERATIONS
MAKING GOOD OF FINISHES, ETC.
ALTERATIONS
Making good external bagged finish to cement plaster:
ALTERATIONS
Walls in patches.
ALTERATIONS
REMEDIAL WORKS
2 34 0.00 0.00 0.00
2 34 22 m 360 0.00 0.00 0.00
2 34 23 m 220 0.00 0.00 0.00
2 34 0.00 0.00 0.00
ALTERATIONS
Roof timber rafters:
ALTERATIONS
Replace broken or missing eaves purlin with 50 x 76mm wrot softwood purlin, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
Reinforcing the exiting timber tie beam size114 x 38mm wrot softwood complete with rafter feets, including allowing for lifting up roof sheets and refixing and including new roofing screws
ALTERATIONS
ROOF LEAKS REPAIRS AND SEALING
2 34 0.00 0.00 0.00
2 34 24 m² 1132 0.00 0.00 0.00
2 35 25 m² 531 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 Preamble 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Inspect, re-fastened, replace missing screws, and seal roof screws, gaps, overlaps, holes, flashings, etc with 'Klodek Glass fibre fabric with two coats of sealant' where necessary to leave in perfect waterproof condition on completion:
ALTERATIONS
On existing IBR roof covering.
ALTERATIONS
On existing corrugated roof covering.
ALTERATIONS
PLASTER REPAIRS
ALTERATIONS
General Notes
ALTERATIONS
ALTERATIONS
All plaster repair admixtures are to be applied strictly in accordance with the "abe Construction Chemicals" or similar approvedd requirements. Break out all loose and hollow plaster at least 20 mm wide all around loose plaster area, brush clean of all l
2 35 0.00 0.00 0.00
2 35 26 m² 47 0.00 0.00 0.00
2 35 27 m² 11 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
2 35 0.00 0.00 0.00
ALTERATIONS
Prepare and apply 3 to 1 plaster admixture as described
ALTERATIONS
On brick walls
ALTERATIONS
On narrow widths
ALTERATIONS
CRACK REPAIRS
ALTERATIONS
Measurement and payment is to be per metre of crack.
ALTERATIONS
Preamble
Surfaces shall be dry and clean, free of dust, sand, grit and flaking particles, rust, scale, marine growths, laitance and loose matter, contaminants such as oil, grease, etc. Cracks to be cleaned and widened by hand or mechanical means. Where
2 35 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 28 On walls m 82 0.00 0.00 0.00
2 36 0.00 0.00 0.00
2 36 0.00 0.00 0.00
ALTERATIONS
Repair crack in plastered walls by hacking off existing plaster to 300mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'epidermix'/ 'mendell 90' or similar approved crack repair product, cover with 13mm c
ALTERATIONS
Repair cracked plaster surfaces as noted above:
ALTERATIONS
ALTERATIONS
Repair crack in screeded floors by hacking off the existing screed to expose the concrete surface, 200mm width on either side of the crack, wedge crack with timber wedges at 300mm centres and fill with 'abe epidermix 344' or similar approved 'wet to dry'
ALTERATIONS
Repairs to cracked floors as noted above:
2 36 29 m 67 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 1 m³ 64 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 2 Soft rock. m³ 3 0.00 0.00 0.00
2 38 3 Hard rock. m³ 1 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 4 m² 98 0.00 0.00 0.00
2 38 0.00 0.00 0.00
ALTERATIONS
On concrete floors
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EARTHWORKS
EXCAVATION OTHER THAN BULK
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKS
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EARTHWORKS
CARTING AWAY.
2 38 0.00 0.00 0.00
2 38 5 m³ 64 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 0.00 0.00 0.00
2 38 6 m³ 32 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Surface Preparation:
2 39 7 m² 141 0.00 0.00 0.00
2 39 0.00 0.00 0.00
2 39 0.00 0.00 0.00
EARTHWORKS
Trim and level off surface of natural ground and/or excavated surfaces to receive concrete surface beds, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum dens
EARTHWORKS
SOIL POISONING
EARTHWORKS
Approved brand of anti-termite soil poison mixed with weedkiller applied by a Registered Pest Control company and guaranteed against termite infestation for ten years, strictly according to manufacturer's instructions:
2 39 8 m² 141 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 1 Sets 12 0.00 0.00 0.00
2 41 0.00 0.00 0.00
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE
2 41 0.00 0.00 0.00
2 41 2 m³ 37 0.00 0.00 0.00
2 41 3 m³ 42 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 4 Beams. m³ 1 0.00 0.00 0.00
2 41 5 m³ 71 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 0.00 0.00 0.00
2 41 6 m² 471 0.00 0.00 0.00
2 42 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Strip footings.
CONCRETE, FORMWORK AND REINFORCEMENT
Foundation edge beams.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 Mpa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a power float:
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls and currents.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
2 42 0.00 0.00 0.00
2 42 7 m 362 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 8 m² 554 0.00 0.00 0.00
2 42 9 m 362 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 10 Beams. m² 3 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 11 Beams. m² 2 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Foundation edge beams (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
SMOOTH FORMWORK (DEGREE OF ACCURACY II)
CONCRETE, FORMWORK AND REINFORCEMENT
Smooth Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Smooth Formwork to Soffits:
CONCRETE, FORMWORK AND REINFORCEMENT
2 42 0.00 0.00 0.00
2 42 0.00 0.00 0.00
2 42 12 Tonnes 0.07 0.00 0.00 0.00
2 42 13 Tonnes 0.05 0.00 0.00 0.00
2 42 14 Tonnes 0.03 0.00 0.00 0.00
2 43 0.00 0.00 0.00
2 43 15 m² 471 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT (PROVISIONAL)
CONCRETE, FORMWORK AND REINFORCEMENT
High tensile steel reinforcement to structural concrete work:
CONCRETE, FORMWORK AND REINFORCEMENT
12mm Diameter bars.
CONCRETE, FORMWORK AND REINFORCEMENT
10mm Diameter bars.
CONCRETE, FORMWORK AND REINFORCEMENT
8mm Diameter bars.
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00 2 MASONRY 45 Pointing: 0.00 0.00 0.00
SUPPLEMENTARY PREAMBLESBRICKWORKBrick reinforcements:
The brickwork reinforcements have been measured on every course in foundations brickworks, every third course in superstructure brickwork, and every course in the beamfilling brickwork.Sizes in descriptions:
Where sizes in descriptions are given in brick units, 'one brick' shall represent the length and 'half brick' the width of a brick.Hollow walls etc:
Descriptions of hollow walls shall be deemed to include leaving every fifth perpend of the bottom course of the external skin open as a weep hole.
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 0.00 0.00 0.00
2 MASONRY 45 1 m 67 0.00 0.00 0.00
2 MASONRY 45 2 m 24 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
Descriptions of recessed pointing to fair face brickwork and face brickwork shall be deemed to include square recessed, hollow recessed, weathered pointing, etc.BRICKWORK SUNDRIESBrickwork reinforcement:75mm Wide reinforcement built in horizontally.
150mm Wide reinforcement built in horizontally.
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
FLUSH DOORS
2 46 0.00 0.00 0.00
2 46 1 No. 8 0.00 0.00 0.00
2 46 2 No. 2 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 3 No. 30 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 4 m 304 0.00 0.00 0.00
2 46 0.00 0.00 0.00
2 46 0.00 0.00 0.00
CARPENTRY AND JOINERY
'Bruply' solid core flush doors with 3,2mm standard hardboard covering on both sides hung to steel frames on one brickwall:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
40mm Double door 1220 x 2032mm high with rebated meeting edges.
CARPENTRY AND JOINERY
Semi-solid flush doors with commercial veneer on half brickwall:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
EAVES, VERGES, ETC
CARPENTRY AND JOINERY
Everite FC77 pressed fibre-cement:
CARPENTRY AND JOINERY
225 x 6 mm Fascias and barge boards including galvanised steel H-profile jointing strips, screwed onto edges of existing timber trusses, rafters and purlins.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
CARPENTRY AND JOINERY
Wrought ' supawood':
2 46 5 m 290 0.00 0.00 0.00
2 46 6 m 220 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 1 m² 993 0.00 0.00 0.00
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CEILINGS PARTITIONS AND ACCESS FLOORING
METAL NAILED UP AND SCREW UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm IBRprofile metal ceiling in single lengths fixed to steel purlins/branderings or rails:
CEILINGS PARTITIONS AND ACCESS FLOORING
Ceilings including 75 x 50 x2.5mm lipped channel brandering at 1250mm centres, bolted to and including 50 x 50 x 5mm L-shaped 50mm long cleat.
2 47 2 No. 4 0.00 0.00 0.00
2 47 0.00 0.00 0.00
2 47 3 m 100 0.00 0.00 0.00
2 47 4 m 220 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 3mm angle section framing covered with 0.5mm thick IBR profile sheeting fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
and broad flute closers 150mm girth to suit IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
IRONMONGERY
HINGES, FLOOR SPRING HINGES, BOLTS, PANIC BOLTS, ETC
IRONMONGERY
Flush barrel bolts in Solid or similar approved:
2 48 1 No. 5 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 2 No. 4 0.00 0.00 0.00
2 48 3 No. 28 0.00 0.00 0.00
2 48 4 No. 11 0.00 0.00 0.00
2 48 LOCKS 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 5 No. 40 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 0.00 0.00 0.00
2 48 6 No. 30 0.00 0.00 0.00
2 49 SUNDRIES 0.00 0.00 0.00
2 49 0.00 0.00 0.00
2 49 7 No. 40 0.00 0.00 0.00
IRONMONGERY
500 x 32mm Satin chrome on brass flush barrel bolt with keep let into concrete.
IRONMONGERY
CATCHES, CABIN HOOKS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved standard window catch.
IRONMONGERY
Approved standard window stay.
IRONMONGERY
Approved standard window handle.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
'Blesbok' Art 460/312 four lever lockset complete with a pair of handles.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Approved chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Dclsa or similar approved:
IRONMONGERY
Code 140/83 satin chrome plated floor mounted door stop.
2 49 0.00 0.00 0.00
2 49 0.00 0.00 0.00
2 49 8 No. 10 0.00 0.00 0.00
2 49 9 No. 10 0.00 0.00 0.00
2 49 10 No. 10 0.00 0.00 0.00
2 51 0.00 0.00 0.00
2 51 0.00 0.00 0.00
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or or similar approved:
IRONMONGERY
Pinning board model 2300 code: 2309, 2,400 x 1,200mm high plugged.
IRONMONGERY
Pinning board model 2300 code: 2315, 1,000 x 1,200mm high plugged.
IRONMONGERY
System 1000 green writing board 2,700 x 1,140mm high chalk rail plugged.
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
WELDED SCREENS, GATES, ETC.
2 51 0.00 0.00 0.00
2 51 1 No. 1 0.00 0.00 0.00
2 51 2 No. 2 0.00 0.00 0.00
2 51 3 No. 9 0.00 0.00 0.00
METALWORK
The following in purpose made screens, frames, and gates, etc:
METALWORK
Purpose made single security gate 813 x 2,032mm high overall, formed of 38 x 76 x 2.5mm mild steel square hollow section perimeter framing and two centre transoms forming top and bottom openings, each filled in with 'Mentix Flattex Code No. 341' expanded
METALWORK
Extra on 40 x 76 x 3mm hollow section framing for mitred angle intersection.
METALWORK
10mm Diameter loose bolt type expanding bolt as 'Rawbolt M10 75L', including mortice in brickwork and bolt up tight.
2 51 4 m 8 0.00 0.00 0.00
2 51 5 Kg 8 0.00 0.00 0.00
2 52 0.00 0.00 0.00
2 52 6 No. 2 0.00 0.00 0.00
2 52 0.00 0.00 0.00
2 52 0.00 0.00 0.00
2 52 7 No. 8 0.00 0.00 0.00
METALWORK
Purpose made gate frame consisting of 40 x 76 x 3mm square hollow section bolted to brickwork with bolts (bolts elsewhere measured).
METALWORK
10mm M10 Bolts.
METALWORK
Screens and gates:
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
1,2mm Double rebated frames suitable for one brick walls:
METALWORK
Frame for door 813 x 2032mm high.
2 52 0.00 0.00 0.00
2 52 8 No. 30 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 SCREEDS 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 1 m² 1192 0.00 0.00 0.00
2 54 0.00 0.00 0.00
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 813 x 2032mm high.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake od similar approved floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings (internal and external).
PLASTERING
INTERNAL PLASTER
2 54 0.00 0.00 0.00
2 54 2 On walls. m² 27 0.00 0.00 0.00
2 54 3 m 7 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 0.00 0.00 0.00
2 54 4 m² 4 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00
2 TILING 55 1 m 117 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00
PLASTERING
Cement plaster on brickwork:
PLASTERINGPLASTERING
On narrow widths.
PLASTERING
EXTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.NOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.CERAMIC WALL TILING
2 TILING 55 0.00 0.00 0.00
2 TILING 55 2 m² 45 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00
2 TILING 55 0.00 0.00 0.00 2 TILING 55 3 On floors. m² 871 0.00 0.00 0.00
2 TILING 55 4 No. 30 0.00 0.00 0.00
2 TILING 55 5 m 117 0.00 0.00 0.00
Allow a PC sum of N$ 100.00 per m2 for purchasing and delivery of 200 x 200mm wall tiles fixed with adhesive to and including 20mm plaster bedding on plastered wall and flush pointed with tinted waterproof jointing compound:On walls in isolated panels, splashbacks, etc.CERAMIC FLOOR TILING
Allow a PC sum of N$ 280.00 per m2 for the purchasing and delivery of 300 x 300mm full body ceramic floor tiles fixed with adhesive to and including 25mm screed bedding and flush pointed with tinted waterproof jointing compound:
Circular cutting.100mm high cut tile skirting.
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLUMBING AND DRAINAGE
SUPPLEMENTARY PREAMBLES
PLUMBING AND DRAINAGE
uPVC pressure pipes and fittings:
PLUMBING AND DRAINAGE
Pipes for water supply shall be of the class stated.
PLUMBING AND DRAINAGE
Pipes of 40mm diameter and smaller shall be plain ended with solvent welded uPVC loose sockets and fittings.
PLUMBING AND DRAINAGE
Pipes of 50mm diameter and greater shall have sockets and spigots with push-in type integral rubber ring joints. Bends shall be uPVC and all other fittings shall be cast iron, all with similar push-in type joints.
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 56 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Copper pipes:
PLUMBING AND DRAINAGE
Pipes shall be hard drawn and half-hard pipes of the class stated. Class 0 (thin walled hard drawn) pipes shall not be bent. Class 1 (thin walled half-hard), class 2 (half-hard) and class 3 (heavy walled half-hard) pipes shall only be bent with benders wi
PLUMBING AND DRAINAGE
Fixing of pipes:
PLUMBING AND DRAINAGE
Unless specifically otherwise stated, descriptions of pipes shall be deemed to include for fixing to walls etc. casting in, building in or suspending not exceeding 1m below suspension level
PLUMBING AND DRAINAGE
Reducing fittings:
2 56 0.00 0.00 0.00
2 56 Flush pans: 0.00 0.00 0.00
2 56 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Where fittings have reducing ends or branches they are described as 'reducing'. In the case of pipes with diameters not exceeding 60mm only the largest end or branch size is given. Should the Contractor wish to use other fittings and bushes or reducers he
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Flush pans shall have straight or side outlets and 'P' or 'S' traps as necessary.
PLUMBING AND DRAINAGE
Exposed concrete surfaces:
PLUMBING AND DRAINAGE
Where no manufacturers' instructions exist pipes shall be laid in accordance with clauses 5.1 and 5.2 of each of the following: SABS 1200 L : Medium pressure pipelines LD : Sewers LE : Stormwater drainage Pipe trenches etc shall be backfilled in accord
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Exposed surfaces of concrete stormwater channels, cover slabs, inspection eye marker slabs, gulley tops, cleaning eye tops, catchpits, inspection chambers, etc shall be finished smooth with plaster.
PLUMBING AND DRAINAGE
Excavations:
PLUMBING AND DRAINAGE
No claim for rock excavation will be entertained unless the Contractor has timeously notified the quantity surveyor thereof prior to backfilling.
PLUMBING AND DRAINAGE
Laying, backfilling, bedding, etc of pipes:
PLUMBING AND DRAINAGE
Pipes shall be laid and bedded and trenches shall be carefully backfilled in accordance with manufacturers' instructions.
PLUMBING AND DRAINAGE
Stainless steel basins, sinks, wash troughs, urinals, etc:
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 0.00 0.00 0.00
2 57 1 No. 30 0.00 0.00 0.00
2 57 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Units shall have standard aprons on all exposed edges and tiling keys against walls where applicable.
PLUMBING AND DRAINAGE
Waste unions:
PLUMBING AND DRAINAGE
Descriptions of waste unions shall be deemed to include rubber or vulcanite plugs and chains fixed to fittings.
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
'Ballam' Waterslot or similar approved:
PLUMBING AND DRAINAGE
Low level water-saving WC suit comprising of Polyethylene bowl with heavy duty double flap seat and cover and 6l 'Shires Lynx' duranite cistern.
PLUMBING AND DRAINAGE
'Vaal Sanitaryware' vitreous china wash hand basins and pedestals:
2 57 2 No. 5 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 3 No. 2 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 4 No. 1 0.00 0.00 0.00
2 58 TRAPS ETC 0.00 0.00 0.00
PLUMBING AND DRAINAGE
510 x 405mm 'Hibiscus' white vitreous china lavatory basin (product code 7050) with two tapholes including integrated overflow and chainstay hole.
PLUMBING AND DRAINAGE
'Franke (t/a Citimetal)' grade 304 (18/10) 1,2mm thick stainless steel wash hand basins:
PLUMBING AND DRAINAGE
'Franke Oval A' wash hand basin size 420 x 340mm with pressed bowl , two tapholes , 100mm radius apron and 50mm high splashback, four times bolted to wall with M8 expansion bolts.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved waste unions etc:
PLUMBING AND DRAINAGE
75mm diameter Chrome plated shower/fountain grating (code 323).
PLUMBING AND DRAINAGE
2 58 0.00 0.00 0.00
2 58 5 No. 2 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 6 No. 2 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 0.00 0.00 0.00
2 58 7 m 12 0.00 0.00 0.00
2 58 8 m 7 0.00 0.00 0.00
2 58 9 m 7 0.00 0.00 0.00
2 59 0.00 0.00 0.00
2 59 10 No. 9 0.00 0.00 0.00
2 59 11 No. 3 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved traps etc:
PLUMBING AND DRAINAGE
40mm Rough brass medium seal sink 'P' trap, with FI outlet and cleaning eye (code VA2.360).
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' crutch handle, elbow action and lockshield bibtaps:
PLUMBING AND DRAINAGE
15mm Star Chrome plated foot operated hose bibtap with 20mm BSP thread on outlet (code 507-21).
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class 10 HDPE pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
63mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over HDPE pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
25mm Fittings.
PLUMBING AND DRAINAGE
32mm Reducer.
2 59 12 No. 2 0.00 0.00 0.00
2 59 13 No. 5 0.00 0.00 0.00
2 59 14 32mm Tee. No. 4 0.00 0.00 0.00
2 59 15 No. 2 0.00 0.00 0.00
2 59 16 No. 1 0.00 0.00 0.00
2 59 17 No. 2 0.00 0.00 0.00
2 59 18 No. 3 0.00 0.00 0.00
2 59 19 No. 1 0.00 0.00 0.00
2 59 0.00 0.00 0.00
2 59 20 m 12 0.00 0.00 0.00
2 59 21 m 3 0.00 0.00 0.00
2 60 22 m 6 0.00 0.00 0.00
2 60 23 m 9 0.00 0.00 0.00
2 60 0.00 0.00 0.00
2 60 24 No. 6 0.00 0.00 0.00
2 60 25 No. 6 0.00 0.00 0.00
2 60 Sundries: 0.00 0.00 0.00
PLUMBING AND DRAINAGE
32mm Bend.
PLUMBING AND DRAINAGE
63mm Bend.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
32 x 32 x 25mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 32 x 25mm Reducing tee.
PLUMBING AND DRAINAGE
63 x 63 x 32mm Reducing tee.
PLUMBING AND DRAINAGE
32mm Adaptor coupling.
PLUMBING AND DRAINAGE
63mm Adaptor coupling.
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
Pipes chased into brick walls.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
2 60 26 No. 12 0.00 0.00 0.00
2 60 27 No. 4 0.00 0.00 0.00
2 60 28 Item 1 0.00 0.00 0.00
2 60 TESTING 0.00 0.00 0.00
2 60 Testing: 0.00 0.00 0.00
2 60 29 Item 1 0.00 0.00 0.00
2 60 30 Item 1 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra for connecting 22mm Coper pipe to 25mm HDPE pipe including all neccessary fittings, etc.
PLUMBING AND DRAINAGE
225 x 225mm Cast iron stopcock box including brick chamber below not exceeding 500mm deep internally.
PLUMBING AND DRAINAGE
excavate and connect the new 32mm HDPE water supply pipe to existing municipal water line including all labour and materials to execute the connection.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
Testing drainage pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
'Chubb'or similar approved:
2 61 31 No. 5 0.00 0.00 0.00
2 61 32 No. 6 0.00 0.00 0.00
2 61 33 No. 6 0.00 0.00 0.00
2 61 0.00 0.00 0.00
PLUMBING AND DRAINAGE
'Everyway' hose reel complete with 30m non-kinkable hose 20mm internal diameter plated stopcock, shut-off nozzle and wall bracket complete with 25mm diameter Saunders type A diaphragm isolated valve.
PLUMBING AND DRAINAGE
9kg Rechargeable dry chemical fire extinguisher complete with initial charge painted backing board plugged and screwed to plastered or tiled brick wall.
PLUMBING AND DRAINAGE
80 x 65mm Brass hydrant booster connection with cap and chain.
PLUMBING AND DRAINAGE
Fire hydrant pedestals:
2 61 34 No. 1 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 35 m 120 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 36 No. 6 0.00 0.00 0.00
2 61 0.00 0.00 0.00
2 61 37 m 48 0.00 0.00 0.00
2 61 38 m 32 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Unreinforced concrete hydrant pedestals 900mm high cast around vertical pipe with bottom 300mm below ground, 300 x 300mm square at base and tapering to octagonal shaped top 200 x 200mm overall including necessary excavation, formwork and two coats of pain
PLUMBING AND DRAINAGE
WATER SUPPLIES TO FIRE APPLIANCES
PLUMBING AND DRAINAGE
Class 10 HDPE Type 4 pressure pipes:
PLUMBING AND DRAINAGE
32mm Pipes laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over class 10 HDPE Type 4 pressure pipes for solvent welded pressure fittings:
PLUMBING AND DRAINAGE
32mm Fittings.
PLUMBING AND DRAINAGE
Galvanised steel pipes:
PLUMBING AND DRAINAGE
25mm Pipes laid in and including trenches not exceeding 1m.
PLUMBING AND DRAINAGE
32mm Pipes
2 62 0.00 0.00 0.00
2 62 39 No. 16 0.00 0.00 0.00
2 62 40 No. 10 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 41 m 45 0.00 0.00 0.00
2 62 42 m 95 0.00 0.00 0.00
2 62 SLEEVES 0.00 0.00 0.00
2 62 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Extra over galvanised steel pipes for steel Fittings:
PLUMBING AND DRAINAGE
25mm Fittings
PLUMBING AND DRAINAGE
32mm Fittings
PLUMBING AND DRAINAGE
STORM WATER, SOIL WATER, AND WATER SYSTEMS REPAIRS
PLUMBING AND DRAINAGE
Clean, unblock, seal leakages and where applicable repair or replace part of or entire system or sub-systems to restore service:
PLUMBING AND DRAINAGE
Soilwater system, including inspection chambers, rodding eyes, vents, etc.
PLUMBING AND DRAINAGE
Water reticulation system, including fire protection sub-system, valves, connections, pipe replacement, etc
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
Plastic sleeves for pipes not exceeding 100mm diameter:
2 62 43 No. 10 0.00 0.00 0.00
2 62 0.00 0.00 0.00
2 62 44 No. 6 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 1 No. 1 0.00 0.00 0.00
2 64 2 No. 1 0.00 0.00 0.00
2 64 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
PLUMBING AND DRAINAGE
Plastic sleeves for pipes exceeding 100mm and not exceeding 200mm diameter:
PLUMBING AND DRAINAGE
Sleeve exceeding 250mm and not exceeding 500mm long.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ELECTRICAL WORK
DISTRIBUTION KIOSK
ELECTRICAL WORK
Distribution kiosk, weatherproof, 2 door glassfibre, GOLNIX with busbars, root mount, 12 way.
ELECTRICAL WORK
Meter kiosk.
ELECTRICAL WORK
Distribution kiosk.
ELECTRICAL WORK
Kiosk earthing.
2 64 3 No. 2 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 0.00 0.00 0.00
2 64 4 No. 2 0.00 0.00 0.00
2 64 5 No. 10 0.00 0.00 0.00
2 64 6 No. 2 0.00 0.00 0.00
2 64 7 No. 4 0.00 0.00 0.00
2 65 8 No. 2 0.00 0.00 0.00
2 65 9 No. 3 0.00 0.00 0.00
2 65 10 No. 2 0.00 0.00 0.00
ELECTRICAL WORK
1.2m earthing rod with 16mm2 green insulated copper earth wire from kiosk to rod.
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations the distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock.
ELECTRICAL WORK
Coverplates and circuitbreaker blanks.
ELECTRICAL WORK
SPD's (Surge Arrestors) Ph + N.
ELECTRICAL WORK
5A green toggle By-pass switch.
ELECTRICAL WORK
5A 3-5kA (control circuit).
ELECTRICAL WORK
10A 3-5kA Single pole circuit breaker.
ELECTRICAL WORK
20A 3-5kA Double pole main switch isolator.
ELECTRICAL WORK
25-40-60A 2 pole isolator.
2 65 11 No. 1 0.00 0.00 0.00
2 65 CABLES 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 12 m 620 0.00 0.00 0.00
2 65 13 m 35 0.00 0.00 0.00
2 65 14 m 155 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 0.00 0.00 0.00
2 65 15 No. 14 0.00 0.00 0.00
2 65 16 No. 2 0.00 0.00 0.00
2 65 17 No. 4 0.00 0.00 0.00
2 66 EARTHING 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 18 m 620 0.00 0.00 0.00
2 66 19 m 40 0.00 0.00 0.00
2 66 0.00 0.00 0.00
ELECTRICAL WORK
63A SP+N earth leakage relay (Isolator Type).
ELECTRICAL WORK
ELECTRICAL WORK
600/1000 V PVC/PVC/SWA/PVC copper cable laid in and including trenches and backfilling.
ELECTRICAL WORK
10mm2 2-Core.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
35mm2 4-Core.
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
ELECTRICAL WORK
10mm2 2-Core.
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
35mm2 4-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere).
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
2 66 0.00 0.00 0.00
2 66 20 No. 14 0.00 0.00 0.00
2 66 21 No. 2 0.00 0.00 0.00
2 66 SLEEVES 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 22 m 3 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 23 No. 1 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 0.00 0.00 0.00
2 66 24 m 65 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 25 m 56 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 0.00 0.00 0.00
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections.
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on uPVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Cast in concrete, surface bed or screed.
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enamelled fixed onto conduit.
2 67 26 No. 13 0.00 0.00 0.00
2 67 27 No. 1 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 28 No. 2 0.00 0.00 0.00
2 67 29 No. 9 0.00 0.00 0.00
2 67 30 No. 8 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 31 2.5mm². m 135 0.00 0.00 0.00
2 67 0.00 0.00 0.00
2 67 32 2.5mm². m 70 0.00 0.00 0.00
2 67 33 4mm². m 194 0.00 0.00 0.00
2 68 0.00 0.00 0.00
2 68 0.00 0.00 0.00
2 68 34 No. 2 0.00 0.00 0.00
2 68 35 No. 6 0.00 0.00 0.00
2 68 36 No. 2 0.00 0.00 0.00
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
PVC type fixed onto conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
100 x 50 x 50mm deep box.
ELECTRICAL WORK
100 x 100 x 50mm deep box.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways.
ELECTRICAL WORK
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways.
ELECTRICAL WORKELECTRICAL WORK
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box.
ELECTRICAL WORK
10A Daylight switch inside B10 bulkhead.
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A One-lever two-way switch.
2 68 37 No. 6 0.00 0.00 0.00
2 68 38 No. 5 0.00 0.00 0.00
2 68 39 No. 2 0.00 0.00 0.00
2 68 40 No. 3 0.00 0.00 0.00
2 68 41 No. 1 0.00 0.00 0.00
2 68 42 No. 1 0.00 0.00 0.00
2 68 0.00 0.00 0.00
2 68 0.00 0.00 0.00
2 68 43 No. 6 0.00 0.00 0.00
2 68 44 No. 5 0.00 0.00 0.00
2 69 0.00 0.00 0.00
ELECTRICAL WORK
16A Two-lever one-way switch.
ELECTRICAL WORK
16A Circuit dial weather tight switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
16A Double switch socket outlet.
ELECTRICAL WORK
25A 2 Pole weather proof surface isolator.
ELECTRICAL WORK
30A 2 Pole flush isolator.
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with lamps, connections, etc., mounted in position
ELECTRICAL WORK
Ceiling/Wall mounted light fitting as 'Lascon' B10 with 2xPL9 lamps or similar approved: Type A.
ELECTRICAL WORK
Open Channel 1.5m Fluorescent fitting 2x58 W lamp: Type C.
ELECTRICAL WORK
Relamp existing fittings and replace incandescent lamps with low energy compact fluorescent lamps
2 69 45 No. 100 0.00 0.00 0.00
2 69 46 No. 34 0.00 0.00 0.00
2 69 Sundries: 0.00 0.00 0.00
2 69 47 No. 1 0.00 0.00 0.00
2 69 48 No. 1 0.00 0.00 0.00
2 69 49 No. 4 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 0.00 0.00 0.00
2 69 50 m 27 0.00 0.00 0.00
2 69 51 No. 9 0.00 0.00 0.00
ELECTRICAL WORK
58 W Fluorescent tubes.
ELECTRICAL WORK
PL 9 W CFL's.
ELECTRICAL WORK
ELECTRICAL WORK
Install bird cage on siren.
ELECTRICAL WORK
Replace existing session siren.
ELECTRICAL WORK
Check and repair fualty lighting circuit.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Carefully remove and set aside and reinstal after renovations conductors, etc.:
ELECTRICAL WORK
6mm2 Conductor in 20mm conduit (condiut measured elswhere).
ELECTRICAL WORK
Steel core reinforced copper spike (earthrod) 2,000 x 16mm diameter and brass coupling with driving cap driven into ground.
2 GLAZING 71 0.00 0.00 0.00
2 GLAZING 71 0.00 0.00 0.00
2 GLAZING 71 0.00 0.00 0.00
2 GLAZING 71 1 m² 4 0.00 0.00 0.00
2 GLAZING 71 2 m² 6 0.00 0.00 0.00
2 GLAZING 71 0.00 0.00 0.00
2 GLAZING 71 0.00 0.00 0.00
2 GLAZING 71 3 No. 4 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.GLAZING TO STEEL WITH PUTTY4mm Clear float glass:Panes not exceeding 0,1 m2.
Panes exceeding 0,1m2 and not exceeding 0,5m2.TOPS, SHELVES, DOORS, MIRRORS, ETC.
6 mm Silvered float glass copper backed mirrors with polished edges holed for and fixed with chromium plated dome capped mirror screws with rubber buffers to plugs in brickwork or concrete:Mirror 600 x 600 mm high with 4 screws.
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
SUPPLEMENTARY PREAMBLES
PAINTWORK
All work to be executed in strict accordance with the specifications of Plascon Paints (Pty) Ltd. The coating systems are as per Plascon's 'List of Decorative Paint Products' unless otherwise specified. Full specifications are available on request from Pl
PAINTWORK
Primers and first coats may be thinned in accordance with the paint specifications of Plascon Paints (Pty) Ltd to aid the absorption of the paint.
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
PAINTWORK
All surfaces must be sound, clean and have a moisture content of less than 8% for walls generally and 3% for slabs/screeds etc.
PAINTWORK
Where surfaces of plaster etc are sandy / friable, the first coat must be replaced with 'Plascon Merit' plaster primer thinned 10% with turpentine.
PAINTWORK
All paints are to bear the SABS mark and are to be applied in strict accordance with manufacturer's instructions.
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
PAINTWORK
Prices for paintwork are to include for masking and protecting of all finished paintwork and all finished joinery, tiling, floor coverings, etc. during painting. Any damage to such finished work shall be removed, repaired or replaced at the Contractor's e
PAINTWORK
Prices for painting are to include for painting a one square metre sample panel of all finishing coats and for repeating if required. Only after written approval from Architect may finishing coats be applied.
2 72 0.00 0.00 0.00
2 72 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 0.00 0.00 0.00
PAINTWORK
Prices for all paintwork are to include all colours which have a value of 8 or higher on the Munsell system in accordance with the relevant SABS specification.
PAINTWORK
The Contractor shall provide all necessary dust sheets, covers, etc. required during painting. All door handles, locks and other ironmongery, pelmets, electrical switch and socket covers, etc. are to be removed before commencing the painting. All paint sp
PAINTWORK
PAINTWORK ETC TO NEW WORK
PAINTWORK
ON TEXTURED PLASTER
2 73 0.00 0.00 0.00
2 73 1 m² 50 0.00 0.00 0.00
2 73 2 m² 8 0.00 0.00 0.00
2 73 3 m 3 0.00 0.00 0.00
2 73 ON METAL 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 4 m² 76 0.00 0.00 0.00
2 73 5 m² 40 0.00 0.00 0.00
PAINTWORK
Prepare surfaces and remove all loose material, apply one coat 'Plascon Merit Plaster Primer' and two coats 'Plascon Polvin Super Acrylic' paint:
PAINTWORK
On interior walls.
PAINTWORK
On narrow widths.
PAINTWORK
On interior in bands as skirting, not exceeding 300 mm girth.
PAINTWORK
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel: (all metal)
PAINTWORK
On doors, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On corner protectors.
2 73 0.00 0.00 0.00
2 73 6 m² 993 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 0.00 0.00 0.00
2 73 7 m² 17 0.00 0.00 0.00
2 74 8 m 290 0.00 0.00 0.00
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel: (ceiling)
PAINTWORK
On IBR metal ceilings (measured flat)
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Stop, fill, sand down and prepare wood surfaces and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Super Universal Enamel' paint:
PAINTWORK
On exterior barge and fascia boards, etc not exceeding 300 mm girth.
PAINTWORK
On interior skirtings, rails, etc not exceeding 300 mm girth.
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 0.00 0.00 0.00
2 74 9 m² 2002 0.00 0.00 0.00
2 74 10 m² 75 0.00 0.00 0.00
2 74 11 m 500.8 0.00 0.00 0.00
2 74 12 m² 91 0.00 0.00 0.00
2 74 0.00 0.00 0.00
PAINTWORK
PAINTWORK, ETC TO PREVIOUSLY PAINTED WORK
PAINTWORK
ON SMOOTH PLASTER
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On interior walls.
PAINTWORK
On interior walls in patterned multi-colours.
PAINTWORK
On interior walls in bands not exceeding 300mm girth.
PAINTWORK
On narrow widths, (internal & external)
PAINTWORK
ON TEXTURED PLASTER
2 74 0.00 0.00 0.00
2 74 13 m² 1450 0.00 0.00 0.00
2 75 ON METAL 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 14 m² 8 0.00 0.00 0.00
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, wash with 'Polycell Sugar Soap' or weak spirits of salts, open up cracks and make good with 'Polycell Mendall 90' or 'Polycell Polyfilla Exterior' filler sanded smooth, apply one coat 'Plasco
PAINTWORK
On exterior walls.
PAINTWORK
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse, spot priming with 'Plascon Namelcote Synthetic Metal Primer' and apply one coat 'Plascon Merit Universal Undercoat'
PAINTWORK
On door frames.
2 75 15 m² 159 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 0.00 0.00 0.00
2 75 16 m² 22 0.00 0.00 0.00
2 77 0.00 0.00 0.00
PAINTWORK
On windows, gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
ON WOOD, WOOD BOARD
PAINTWORK
Remove any loose and flaking residue by means of wire brushing, sand down, wash with 'Polycell Sugar Soap' or weak spirits of salts, rinse and apply one coat 'Plascon Oil Wood Primer', one coat 'Plascon Merit Universal Undercoat' and two coats' Plascon Su
PAINTWORK
On exterior roof timbers at eaves and verges.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
2 77 0.00 0.00 0.00
2 77 0.00 0.00 0.00
2 77 1 m² 250 0.00 0.00 0.00
2 77 0.00 0.00 0.00
2 77 0.00 0.00 0.00
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required, stripping topsoil average 100mm and cart a
EXTERNAL WORKS
ROADWORK, PAVING, ETC
EXTERNAL WORKS
Precast concrete kerbs (30 Mpa) finished smooth on exposed surfaces including bedding, cutting, pointing and pointing and 20/19mm Mpa unreinforced concrete haunching at junctions:
2 77 2 m 88 0.00 0.00 0.00
2 77 3 m 90 0.00 0.00 0.00
2 77 4 m 25 0.00 0.00 0.00
2 77 5 m 101 0.00 0.00 0.00
EXTERNAL WORKS
Garden kerb 900 x 250 x 75mm high with twice chamfered edges with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
EXTERNAL WORKS
Barrier kerb 900 x 250 x 125mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc, circular on plan exceeding 4m radius.
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc.
2 78 6 m 19 0.00 0.00 0.00
2 78 7 No. 9 0.00 0.00 0.00
2 78 8 No. 6 0.00 0.00 0.00
2 78 0.00 0.00 0.00
2 78 9 m³ 90 0.00 0.00 0.00
2 78 0.00 0.00 0.00
EXTERNAL WORKS
Mountable kerb 900 x 125 x 250mm high with 150 x 300mm unreinforced concrete haunching at back of each joint including excavation, formwork, backfilling, etc., circular on plan not exceeding 4m radius.
EXTERNAL WORKS
1,200mm Diameter 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
2,000 x 2,000 x 300mm high precast concrete ring tree planter including excavation, backfilling, etc.
EXTERNAL WORKS
Open face excavation over sloping site:
EXTERNAL WORKS
Open face excavation to form platform under parking areas etc and carting away surplus material from site to a dumping site to be located by the contractor.
EXTERNAL WORKS
Extra over bulk excavation in earth for excavation in:
2 78 10 Soft rock m³ 5 0.00 0.00 0.00
2 78 11 Hard rock m³ 2 0.00 0.00 0.00
2 78 0.00 0.00 0.00
2 78 12 Brickwork. m³ 1 0.00 0.00 0.00
2 78 13 m³ 2 0.00 0.00 0.00
2 78 14 m³ 3 0.00 0.00 0.00
2 79 0.00 0.00 0.00
2 79 15 m³ 54 0.00 0.00 0.00
2 79 16 m³ 36 0.00 0.00 0.00
2 79 0.00 0.00 0.00
EXTERNAL WORKSEXTERNAL WORKS
EXTERNAL WORKS
Extra over bulk excavation in earth for breaking up and removing:
EXTERNAL WORKSEXTERNAL WORKS
Unreinforced concrete.
EXTERNAL WORKS
Reinforced concrete.
EXTERNAL WORKS
Earth filling supplied by the contractor under pavings etc:
EXTERNAL WORKS
Over site of G5 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Over site of G6 material in accordance with SABS 1200ME, stabilised to attain UCS > 1,0 MPa after seven days and compacted to 98% Mod AASHTO density.
EXTERNAL WORKS
Compaction of surfaces:
2 79 17 m² 200 0.00 0.00 0.00
2 79 0.00 0.00 0.00
2 79 18 m² 200 0.00 0.00 0.00
EXTERNAL WORKS
Compaction of ground surface under pavings etc. including scarifying for a depth of 150mm, breaking down oversize material, adding suitable material where necessary and compacting to 95 % Mod AASHTO density (materials to comply with CBR >25%)
EXTERNAL WORKS
Anti-termite soil poison and weedkiller:
EXTERNAL WORKS
Approved brands of weedkiller and termite poisoning mixed and applied in accordance with the manufacturer's instructions under pavings, etc.
2 79 0.00 0.00 0.00
2 79 19 m² 200 0.00 0.00 0.00
2 79 0.00 0.00 0.00
2 79 20 m³ 20 0.00 0.00 0.00
3 83 0.00 0.00 0.00
EXTERNAL WORKS
standard grey double zig zag interlocking roadstone paving with open joints on 25mm thick river sand bed with sand and cement mixture swept into joints, hose down including bedding, jointing and pointing:
EXTERNAL WORKS
Paving in herring borne pattern bond with butt joints to falls.
EXTERNAL WORKS
Garden soil to planter:
EXTERNAL WORKS
Remove all building rubble and materials to 500mm depth and fill in with garden soil for grassing, planting, etc (Plant, grass, cost elsewhere measured).
EARTHWORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 83 0.00 0.00 0.00
3 83 0.00 0.00 0.00
3 83 0.00 0.00 0.00
3 83 0.00 0.00 0.00
3 83 0.00 0.00 0.00
3 83 1 m² 1930 0.00 0.00 0.00
3 83 0.00 0.00 0.00
EARTHWORKS
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
EARTHWORKS
NATURE OF GROUND
EARTHWORKS
The nature of the ground is assumed to be loose sandy material, therefore "earth", but possibly interspersed with "hard rock" or "soft rock"
EARTHWORKS
SITE CLEARANCE, ETC.
EARTHWORKS
Site clearance, etc.:
EARTHWORKS
Allow for clearing the area of the site to be built upon of all grass, weeds, shrubs, trees with trunks not exceeding 200mm girth, debris, etc., including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EARTHWORKS
EXCAVATION OTHER THAN BULK
3 83 0.00 0.00 0.00
3 83 2 Trenches. m³ 286 0.00 0.00 0.00
3 83 3 m³ 10 0.00 0.00 0.00
3 83 0.00 0.00 0.00
3 83 4 Soft rock. m³ 28 0.00 0.00 0.00
3 84 5 Hard rock. m³ 15 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 6 m² 284 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 7 m² 890 0.00 0.00 0.00
EARTHWORKS
Excavation in earth not exceeding 2m deep:
EARTHWORKS
EARTHWORKS
Trenches and holes for thickening under paving edge.
EARTHWORKS
Extra over excavations other than bulk in earth for excavation in:
EARTHWORKSEARTHWORKSEARTHWORKS
Compaction:
EARTHWORKS
Trim and level off surface of excavated surfaces to receive concrete footings, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
Risk of collapse of excavations other than bulk:
EARTHWORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
3 84 0.00 0.00 0.00
3 84 8 m³ 104.48 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 9 m³ 94 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 0.00 0.00 0.00
3 84 10 m³ 127 0.00 0.00 0.00
3 84 11 m³ 47 0.00 0.00 0.00
EARTHWORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically Vibrated:
EARTHWORKS
In trenches, holes, etc under strip footings.
EARTHWORKS
CARTING AWAY.
EARTHWORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
EARTHWORKS
Off site to a dumping site to be found by the Contractor.
EARTHWORKS
EARTH FILLING, ETC.
EARTHWORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Backfilling to trenches, holes, etc.
3 85 0.00 0.00 0.00
3 85 12 m³ 95 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 13 m³ 34 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 14 m² 359 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
EARTHWORKS
Filling with approved material supplied and carted onto site by the Contractor, compacted to a density of at least 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, pavings, etc.
EARTHWORKS
Coarse river sand filling compacted to 95% Mod. AASHTO maximum density:
EARTHWORKS
Under floors, etc.
EARTHWORKS
Surface Preparation:
EARTHWORKS
Trim and level off surface of natural ground surfaces to receive concrete paving, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EARTHWORKS
KEEPING EXCAVATIONS FREE OF WATER
EARTHWORKS
Keeping excavations free of water:
3 85 15 Item 1 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 0.00 0.00 0.00
3 85 16 m² 284 0.00 0.00 0.00
3 85 17 m² 667 0.00 0.00 0.00
3 87 0.00 0.00 0.00
EARTHWORKS
Allow for keeping excavations free of water by hand or machinery.
EARTHWORKS
SOIL POISONING
EARTHWORKS
Approved brands of weedkiller mixed with termite poison and applied in accordance with the manufacturer's instructions:
EARTHWORKS
To bottoms of trenches, etc.
EARTHWORKS
Under floors, etc., including forming and poisoning shallow furrows against foundation walls, etc., filling in furrows and ramming.
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 87 0.00 0.00 0.00
3 87 0.00 0.00 0.00
3 87 0.00 0.00 0.00
3 87 0.00 0.00 0.00
3 87 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
CONCRETE, FORMWORK AND REINFORCEMENT
SUPPLEMENTARY PREAMBLES
CONCRETE, FORMWORK AND REINFORCEMENT
The Tenderer must allow in his/her pricing for the costs of making, storing and testing of concrete test cubes as required under clause 7 'Tests' of SABS 1200 G and shall include the cost of providing cube moulds necessary for the purpose, for testing cos
CONCRETE, FORMWORK AND REINFORCEMENT
TEST BLOCKS
CONCRETE, FORMWORK AND REINFORCEMENT
Test blocks:
3 87 1 Sets 50 0.00 0.00 0.00
3 87 0.00 0.00 0.00
3 87 0.00 0.00 0.00
3 87 2 m³ 66 0.00 0.00 0.00
3 87 3 m³ 45 0.00 0.00 0.00
3 88 4 Slabs. m3 1.26 0.00 0.00 0.00
3 88 5 m3 3.13 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 6 m³ 65 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Making and testing set of six 150 x 150 x 150mm concrete strength test cubes (Provisional).
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds cast in panels on waterproofing.
CONCRETE, FORMWORK AND REINFORCEMENT
Pavings cast in panels.
CONCRETE, FORMWORK AND REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
UNREINFORCED CONCRETE CAST AGAINST EXCAVATED SURFACES
CONCRETE, FORMWORK AND REINFORCEMENT
25Mpa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Strip footings.
3 88 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 7 m3 0.6 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 8 m² 309 0.00 0.00 0.00
3 88 9 m² 359 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 0.00 0.00 0.00
3 88 10 m 197 0.00 0.00 0.00
3 88 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCED CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
25 MPa/19mm Concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
FINISHING TOP SURFACE OF CONCRETE
CONCRETE, FORMWORK AND REINFORCEMENT
Finishing top surfaces of concrete smooth with a steel trowel:
CONCRETE, FORMWORK AND REINFORCEMENT
Surface beds, slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Paving to falls.
CONCRETE, FORMWORK AND REINFORCEMENT
GROOVES, ETC.
CONCRETE, FORMWORK AND REINFORCEMENT
Grooves, channels, mortices, sinkings, etc in concrete:
CONCRETE, FORMWORK AND REINFORCEMENT
40 x 40mm Chamfer to exposed concrete edges.
CONCRETE, FORMWORK AND REINFORCEMENT
ROUGH FORMWORK (DEGREE OF ACCURACY II)
3 88 0.00 0.00 0.00
3 88 11 m² 28 0.00 0.00 0.00
3 89 12 m 430 0.00 0.00 0.00
3 89 0.00 0.00 0.00
3 89 13 m² 7 0.00 0.00 0.00
3 89 0.00 0.00 0.00
3 89 14 No. 5 0.00 0.00 0.00
3 89 0.00 0.00 0.00
3 89 0.00 0.00 0.00
3 89 15 m² 7 0.00 0.00 0.00
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Sides:
CONCRETE, FORMWORK AND REINFORCEMENT
Truss anchor block.
CONCRETE, FORMWORK AND REINFORCEMENT
Edges, risers, ends and reveals not exceeding 300mm high or wide.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough Formwork to Soffits:
CONCRETE, FORMWORK AND REINFORCEMENT
Vanity slabs, cupboard slabs, cover slabs, etc.
CONCRETE, FORMWORK AND REINFORCEMENT
Rough formwork to form:
CONCRETE, FORMWORK AND REINFORCEMENT
Opening exceeding 1m and not exceeding 2m girth through not exceeding 300mm slab.
CONCRETE, FORMWORK AND REINFORCEMENT
REINFORCEMENT
CONCRETE, FORMWORK AND REINFORCEMENT
Fabric reinforcement:
CONCRETE, FORMWORK AND REINFORCEMENT
Type 245 fabric reinforcement in concrete surface beds, slabs, etc.
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers FlatsSUPPLEMENTARY PREAMBLES
The Tenderer must allow in his /her pricing for the cost of providing brick compression tests. The testing shall be undertaken by an independent firm or institution nominated by the Contractor to the approval of the Site Supervisor. Failing to do so can r
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 1 m² 143 0.00 0.00 0.00
3 MASONRY 91 2 m² 370 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 0.00 0.00 0.00
3 MASONRY 91 3 m² 333 0.00 0.00 0.00
3 MASONRY 92 4 m² 47 0.00 0.00 0.00
3 MASONRY 92 5 m² 897 0.00 0.00 0.00
3 MASONRY 92 6 m 8 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 7 m 89 0.00 0.00 0.00
Where sizes in descriptions are given in brick units, 'one brick' shall represent the length and 'half brick' the width of a brick:
BRICKWORK IN FOUNDATIONS (PROVISIONAL)
Brickwork of concrete bricks [14Mpa] in Class I mortar:Half brick walls.One brick walls.BRICKWORK IN SUPERSTRUCTURE
Brickwork of concrete bricks [7Mpa] in Class I mortar:Half brick walls.Half brick walls in beamfilling.One brick walls.Half brick kerbs 170mm high.Brickwork of concrete bricks in Class I mortar:BRICKWORK SUNDRIESBrickwork sundries:Brick-on-edge cill set sloping and projecting.
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 8 m² 667 0.00 0.00 0.00
3 MASONRY 92 9 m² 4 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 10 m² 671 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 11 m² 5 0.00 0.00 0.00
3 MASONRY 92 0.00 0.00 0.00
3 MASONRY 92 12 m 1282 0.00 0.00 0.00
3 MASONRY 93 13 m 1927 0.00 0.00 0.00
3 MASONRY 93 14 m 4497 0.00 0.00 0.00
Fair face to brickwork in horizontal stretcher bond pointed with recessed horizontal and flush vertical joints:Extra for fair face.Half brick walls pointed on both sides.Cement wash of 1:3 liquid cement and sand mixture applied with a brush:On brick surfaces.Joint forming material in movement joints:10mm Bitumen impregnated fibre board built in vertically through brick walls.Brickwork reinforcement:75mm Wide reinforcement built in horizontally in foundations.75mm Wide reinforcement built in horizontally.
150mm Wide reinforcement built in horizontally in foundations.
3 MASONRY 93 15 m 4648 0.00 0.00 0.00
3 MASONRY 93 0.00 0.00 0.00
3 MASONRY 93 16 m 243 0.00 0.00 0.00
3 MASONRY 93 0.00 0.00 0.00
3 MASONRY 93 17 No. 42 0.00 0.00 0.00
3 MASONRY 93 0.00 0.00 0.00
3 MASONRY 93 0.00 0.00 0.00
3 MASONRY 93 18 m 53 0.00 0.00 0.00
3 95 0.00 0.00 0.00
150mm Wide reinforcement built in horizontally.Approved prestressed fabricated lintels:
110 x 75mm Lintels in lengths not exceeding 3m.Air bricks etc:230 x 160mm Galvanised air brick.NUTEC-CEMENT WINDOW SILLSNatural grey sills in single lengths bedded in class I mortar including metal fixing lugs etc:
15 x 150mm Wide sills set flat and slightly projecting.
WATERPROOFING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 1 In walls. m² 36 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 2 m² 824 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
WATERPROOFING
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
WATERPROOFING
DAMPPROOFING OF WALLS AND FLOORS
WATERPROOFING
One layer of 375 micron Consol Plastics Brikgrip DPC embossed damp proof course:
WATERPROOFING
WATERPROOFING
One layer of 250 micron Consol Plastics Gunplas Black waterproof sheeting sealed at laps with Gunplas Pressure Sensitive Tape:
WATERPROOFING
Under surface beds.
WATERPROOFING
WATERPROOFING TO ROOFS, BASEMENTS, ETC.
WATERPROOFING
Bondglass flexible reinforced waterproofing:
3 95 3 m 1 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 0.00 0.00 0.00
3 95 4 m 27 0.00 0.00 0.00
3 96 0.00 0.00 0.00
3 96 5 m 32 0.00 0.00 0.00
WATERPROOFING
Flashing strip 150mm girth at turn-ups including sealing top edge into groove with mastic.
WATERPROOFING
JOINT SEALANTS ETC
WATERPROOFING
'Expandite' or other approved two-part grey polysulphide sealing compound including backing cord, bond breaker, primer, etc:
WATERPROOFING
10 x 15mm In vertical expansion joints.
WATERPROOFING
'Sikaflex' PRO-3 WF multi-use, one component, polyurethane sealant in colour Concrete Grey applied in accordance with the manufacturer's instructions:
WATERPROOFING
10 x 15mm elastic joint on floor tiling.
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
3 98 0.00 0.00 0.00
ROOF COVERINGS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ROOF COVERINGS
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
ROOF COVERINGS
SUPPLEMENTARY PREAMBLES
ROOF COVERINGS
sheeting must be oiled at junction with mortar to prevent sticking and cracking:
ROOF COVERINGS
TROUGHED METAL SHEETING AND ACCESSORIES
3 98 0.00 0.00 0.00
3 98 1 m² 1167 0.00 0.00 0.00
3 98 Flashings: 0.00 0.00 0.00
3 98 2 m 103 0.00 0.00 0.00
3 98 3 m 158 0.00 0.00 0.00
3 98 4 m 165 0.00 0.00 0.00
3 99 5 m 41 0.00 0.00 0.00
3 99 6 m 43 0.00 0.00 0.00
3 99 0.00 0.00 0.00
ROOF COVERINGS
0.5mm Thick industrial Z275 IBR profiled or similar approved sheet steel in single lengths fixed to steel purlins or rails and sheet steel accessories:
ROOF COVERINGS
Roof covering with pitch not exceeding 25 degrees, in transportable lengths not exceeding 20m.
ROOF COVERINGS
ROOF COVERINGS
Ridge capping 550mm girth, three times bent along girth and notched on site to suit roof profile.
ROOF COVERINGS
Serrated eaves closers.
ROOF COVERINGS
Narrow and broad flute closers.
ROOF COVERINGS
Barge flashing 550mm girth, three times bent along girth and notched on site to suit roof profile.
ROOF COVERINGS
Gable trim 550mm girth and three times bent along girth.
ROOF COVERINGS
ROOF AND WALL INSULATION
3 99 0.00 0.00 0.00
3 99 7 m² 830 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 SKIRTINGS 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 1 m 347 0.00 0.00 0.00
ROOF COVERINGS
Sisalation 400 housing grade glass fibre reinforced aluminium foil bonded insulation:
ROOF COVERINGS
Insulation laid taut over purlins on galvanised straining wires (at approximately 300mm centres).
CARPENTRY AND JOINERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
CARPENTRY AND JOINERY
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
CARPENTRY AND JOINERYCARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
19 x 76mm Skirting.
3 101 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 2 No. 2 0.00 0.00 0.00
3 101 3 No. 8 0.00 0.00 0.00
3 101 0.00 0.00 0.00
3 101 4 No. 8 0.00 0.00 0.00
3 101 5 No. 2 0.00 0.00 0.00
3 101 6 No. 8 0.00 0.00 0.00
3 102 7 No. 8 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 8 No. 16 0.00 0.00 0.00
3 102 0.00 0.00 0.00
CARPENTRY AND JOINERY
FLUSH DOORS
CARPENTRY AND JOINERY
'Bruply' semi-solid flush doors with 3,2mm standard hardboard covering on both sides hung to steel frames:
CARPENTRY AND JOINERY
40mm Door 762 x 2032mm high.
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
Semi-solid flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 762 x 2032mm high.
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
40mm Double door 1220 x 457mm high with rebated meeting edges.
CARPENTRY AND JOINERY
40mm Double door 1220 x 2032mm high with rebated meeting edges.
CARPENTRY AND JOINERY
Solid chipcore external quality flush doors with commercial veneer:
CARPENTRY AND JOINERY
40mm Door 813 x 2032mm high.
CARPENTRY AND JOINERY
BEADS, ARCHITRAVES, ETC
3 102 0.00 0.00 0.00
3 102 9 m 98 0.00 0.00 0.00
3 102 10 m 175 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 0.00 0.00 0.00
3 102 11 No. 7 0.00 0.00 0.00
3 102 12 No. 12 0.00 0.00 0.00
CARPENTRY AND JOINERY
Wrought 'Supawood':
CARPENTRY AND JOINERY
22 x 150mm Angle rounded bumper rail.
CARPENTRY AND JOINERY
22 x 75mm cornice.
CARPENTRY AND JOINERY
NOTICE BOARDS, PINNING BOARDS, KEYBOARDS, DUCKBOARDS, ETC
CARPENTRY AND JOINERY
Vitrex or similar approved:
CARPENTRY AND JOINERY
Pinboards model 2300 code: '2309', size 2,400 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F2).
CARPENTRY AND JOINERY
Pinboards model 2300 code: '2315', size 1,000 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F3).
3 102 13 No. 10 0.00 0.00 0.00
3 102 Softboard: 0.00 0.00 0.00
3 102 14 m² 17 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 15 m 23 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 16 m 251 0.00 0.00 0.00
3 103 17 m 14 0.00 0.00 0.00
3 103 18 m 23 0.00 0.00 0.00
3 103 19 m 22 0.00 0.00 0.00
3 103 20 m 14 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 21 m² 14 0.00 0.00 0.00
3 103 22 m 21 0.00 0.00 0.00
CARPENTRY AND JOINERY
Pinboard model 2300 code: '2309', size 2,400 x 1,200mm, with aluminium frame plugged and screwed to wall with 38mm steel countersunk screws (Drwng F1).
CARPENTRY AND JOINERYCARPENTRY AND JOINERY
13mm Pinning boards.
CARPENTRY AND JOINERY
THE FOLLOWING IN KITCHEN CUPBOARDS
CARPENTRY AND JOINERY
Sawn softwood:
CARPENTRY AND JOINERY
38 x 38mm Framed framing plugged.
CARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
8 x 18mm Edge strips.
CARPENTRY AND JOINERY
19 x 75mm Bearers.
CARPENTRY AND JOINERY
19 x 75mm Bearers plugged.
CARPENTRY AND JOINERY
19 x 75mm Skirtings.
CARPENTRY AND JOINERY
25 x 50mm Fixing rail nailed.
CARPENTRY AND JOINERY
Wrought 'Supa wood':
CARPENTRY AND JOINERY
32mm Tops.
CARPENTRY AND JOINERY
18.x 76mm Cover plugged.
3 103 23 No. 1 0.00 0.00 0.00
3 103 0.00 0.00 0.00
3 103 24 m² 26 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 25 m² 12 0.00 0.00 0.00
3 104 Melawood: 0.00 0.00 0.00
3 104 26 m² 50 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 27 m² 14 0.00 0.00 0.00
3 104 28 No. 8 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 29 m 31 0.00 0.00 0.00
3 104 30 m 2 0.00 0.00 0.00
3 104 Melawood: 0.00 0.00 0.00
3 104 31 m² 9 0.00 0.00 0.00
CARPENTRY AND JOINERY
Circular cutting to decorative laminate to fit sink.
CARPENTRY AND JOINERY
Tempered hardboard:
CARPENTRY AND JOINERY
6mm Backing.
CARPENTRY AND JOINERY
Novawhite particle board:
CARPENTRY AND JOINERY
18mm Thick shelves, divisions, etc.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
Formica decorative laminate:
CARPENTRY AND JOINERY
1.2mm Thick post form to tops, etc.
CARPENTRY AND JOINERY
Circular cutting to decorative laminate to fit sink.
CARPENTRY AND JOINERY
THE FOLLOWING IN PIGEON HOLE CUPBOARD
CARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
8 x 18mm Edge strips.
CARPENTRY AND JOINERY
38 x 38mm Fixing rail plugged.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
3 104 0.00 0.00 0.00
3 104 0.00 0.00 0.00
3 104 32 m 2 0.00 0.00 0.00
3 104 33 m 9 0.00 0.00 0.00
3 105 34 m 3 0.00 0.00 0.00
3 105 35 m 3 0.00 0.00 0.00
3 105 36 m 3 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 37 m² 5 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 38 m 16 0.00 0.00 0.00
3 105 39 m 9 0.00 0.00 0.00
3 105 40 m 5 0.00 0.00 0.00
3 105 0.00 0.00 0.00
3 105 41 m 7 0.00 0.00 0.00
3 105 42 m 2 0.00 0.00 0.00
3 105 43 m 7 0.00 0.00 0.00
3 105 44 m 10 0.00 0.00 0.00
3 105 45 m 3 0.00 0.00 0.00
3 106 Melawood: 0.00 0.00 0.00
CARPENTRY AND JOINERY
THE FOLLOWING IN RECEPTION COUNTER
CARPENTRY AND JOINERY
Sawn softwood:
CARPENTRY AND JOINERY
38 x 114mm Cleats.
CARPENTRY AND JOINERY
38 x 75mm Bearers.
CARPENTRY AND JOINERY
28 x 32mm Filler piece.
CARPENTRY AND JOINERY
28 x 114mm Filler piece.
CARPENTRY AND JOINERY
38 x 75mm Bearers plugged.
CARPENTRY AND JOINERY
Wrought 'Supa Wood':
CARPENTRY AND JOINERY
32mm Tops, etc.
CARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
8 x 18mm Edge strips.
CARPENTRY AND JOINERY
27 x 44mm Triangular shaped edge strips.
CARPENTRY AND JOINERY
19 x 75mm Skirtings.
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
44 x 60mm Rebated edge with rounded edges.
CARPENTRY AND JOINERY
44 x 70mm Twice rounded foot rest
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
22 x 70mm Framed framing bearer.
CARPENTRY AND JOINERY
3 106 46 No. 5 0.00 0.00 0.00
3 106 47 No. 2 0.00 0.00 0.00
3 106 0.00 0.00 0.00
3 106 48 m² 11 0.00 0.00 0.00
3 106 49 No. 1 0.00 0.00 0.00
3 106 0.00 0.00 0.00
3 106 50 m² 5 0.00 0.00 0.00
3 106 0.00 0.00 0.00
CARPENTRY AND JOINERY
Issue tray 104 x 493 x 166mm deep of 12 x 166mm sides, front and back and 4mm tempered hardboard bottom and four 3mm hardboard spacers 110mm x 166mm equally spaced let into sides .
CARPENTRY AND JOINERY
Drawer 535 x 493 x 166mm deep of 18 x 166mm grooved front, 12 x 166mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
'Melawood':
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
Drawer 450mm deep of 600 x 150mm grooved front, 16 x 150mm grooved sides and back and 3mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Formica decorative laminate:
CARPENTRY AND JOINERY
1.2mm Thick to tops, etc.
CARPENTRY AND JOINERY
PELMITS, ETC.
3 106 0.00 0.00 0.00
3 106 51 No. 14 0.00 0.00 0.00
3 106 52 No. 22 0.00 0.00 0.00
3 106 53 No. 8 0.00 0.00 0.00
CARPENTRY AND JOINERY
Wrought 'Supa wood':
CARPENTRY AND JOINERY
Pelmit formed with 18mm Thick 'Supa wood' 138mm wide x 140mm high and 1500mm long (external dimensions) including single curtain track with 10 rollers per metre, brackets, closed ends, etc. plugged.
CARPENTRY AND JOINERY
Pelmit formed with 18mm Thick 'Supa wood' 138mm wide x 140mm high and 2000mm long (external dimensions) including single curtain track with 10 rollers per metre, brackets, closed ends, etc. plugged.
CARPENTRY AND JOINERY
Pelmit formed with 18mm Thick 'Supa wood' 138mm wide x 140mm high and 1000mm long (external dimensions) including single curtain track with 10 rollers per metre, brackets, closed ends, etc. plugged.
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 54 m² 1 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 55 m 8 0.00 0.00 0.00
3 107 56 m 8 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 0.00 0.00 0.00
3 107 57 m 7 0.00 0.00 0.00
3 107 58 m 7 0.00 0.00 0.00
3 107 59 m 3 0.00 0.00 0.00
3 107 60 m 14 0.00 0.00 0.00
3 107 Melawood: 0.00 0.00 0.00
3 107 61 m² 8 0.00 0.00 0.00
CARPENTRY AND JOINERY
JOINERY SUNDRIES
CARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
Slatted shelving, seats, etc of 32 x 68mm slats at 79mm centres.
CARPENTRY AND JOINERY
Wrought 'Supa wood':
CARPENTRY AND JOINERY
18x 140mm Pelmit fascia.
CARPENTRY AND JOINERY
18 x 140mm Pelmit fascia closer piece 120mm wide plugged.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM CUPBOARDS
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18 x 30mm Bearers nailed.
CARPENTRY AND JOINERY
18 x 70mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
12 x 8mm Guide nailed.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
3 107 62 No. 1 0.00 0.00 0.00
3 107 63 No. 2 0.00 0.00 0.00
3 108 64 m 7 0.00 0.00 0.00
3 108 65 m 7 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 66 m² 6 0.00 0.00 0.00
3 108 67 m 2 0.00 0.00 0.00
3 108 68 m 22 0.00 0.00 0.00
3 108 Melawood: 0.00 0.00 0.00
CARPENTRY AND JOINERY
Drawer 453 x 500 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
Drawer 453 x 750 x 141mm deep of 18 x 141mm grooved front and 12 x 141mm grooved sides and back and 4mm tempered hardboard bottom.
CARPENTRY AND JOINERY
1.2mm Thick edge strips 18mm wide.
CARPENTRY AND JOINERY
18 x 70mm Framed framing.
CARPENTRY AND JOINERY
THE FOLLOWING IN CLASSROOM WOODEN SHELVING
CARPENTRY AND JOINERY
Wrought hardwood:
CARPENTRY AND JOINERY
18mm Thick to shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
18 x 75mm Framed framing bearer plugged.
CARPENTRY AND JOINERY
18 x 8mm Edge strips.
CARPENTRY AND JOINERY
3 108 69 m² 10 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 70 m 54 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 71 m 17 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 108 72 m² 18 0.00 0.00 0.00
3 108 0.00 0.00 0.00
3 110 0.00 0.00 0.00
CARPENTRY AND JOINERY
18mm Thick to tops, shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
THE FOLLOWING BUILD-IN CUPBOARDS
CARPENTRY AND JOINERY
Wrought softwood:
CARPENTRY AND JOINERY
20 x 30mm Bearers plugged or nailed to wall.
CARPENTRY AND JOINERY
Wrought meranti:
CARPENTRY AND JOINERY
19 x 75mm Skirtings.
CARPENTRY AND JOINERY
Wrought 'Supa wood':
CARPENTRY AND JOINERY
18mm Tops, shelves, sides, divisions, etc.
CARPENTRY AND JOINERY
Novawhite particle board:
CEILINGS PARTITIONS AND ACCESS FLOORING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 1 Ceilings. m² 690 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
CEILINGS PARTITIONS AND ACCESS FLOORING
SUPPLEMENTARY PREAMBLES
CEILINGS PARTITIONS AND ACCESS FLOORING
sheeting must be oiled at junction with mortar to prevent sticking and cracking.
CEILINGS PARTITIONS AND ACCESS FLOORING
NAILED UP CEILINGS
CEILINGS PARTITIONS AND ACCESS FLOORING
0.5mm Thick light industrial Z275 IBR profiled sheet steel in single lengths fixed to steel purlins or rails:
CEILINGS PARTITIONS AND ACCESS FLOORING
3 110 2 No. 11 0.00 0.00 0.00
3 110 0.00 0.00 0.00
3 110 3 m 127 0.00 0.00 0.00
3 110 4 m 175 0.00 0.00 0.00
3 111 0.00 0.00 0.00
CEILINGS PARTITIONS AND ACCESS FLOORING
Extra over ceiling for 1000 x 1000mm trap door of 30 x 30 x 2.5mm angle section framing covered with 'Alu zinc' IBR profiled sheeting and fitted flush in opening.
CEILINGS PARTITIONS AND ACCESS FLOORING
0.8mm Thick galvanised sheet flashings:
CEILINGS PARTITIONS AND ACCESS FLOORING
and broad flute closers 150mm girth to suit IBR profile.
CEILINGS PARTITIONS AND ACCESS FLOORING
Angle flashing once bend 300mm girth.
IRONMONGERY
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 1 No. 130 0.00 0.00 0.00
3 111 2 No. 14 0.00 0.00 0.00
3 111 3 No. 8 0.00 0.00 0.00
3 111 4 No. 8 0.00 0.00 0.00
3 111 5 No. 2 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 0.00 0.00 0.00
3 111 6 No. 8 0.00 0.00 0.00
3 112 LOCKS 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 7 No. 1 0.00 0.00 0.00
IRONMONGERY
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
IRONMONGERY
HINGES, BOLTS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Metal concealed spring loaded hinges.
IRONMONGERY
Metal concealed hinges.
IRONMONGERY
75mm C.P necked bolt with keep fixed to metal.
IRONMONGERY
75mm C.P necked bolt with keep let into concrete.
IRONMONGERY
50mm Chromium plated brass barrel bolt.
IRONMONGERY
CATCHES, CABIN HOOKS, ETC
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Magnetic catch.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
50mm Padlock.
3 112 8 No. 12 0.00 0.00 0.00
3 112 9 No. 24 0.00 0.00 0.00
3 112 10 No. 7 0.00 0.00 0.00
3 112 11 No. 6 0.00 0.00 0.00
3 112 12 No. 8 0.00 0.00 0.00
3 112 HANDLES 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 13 No. 112 0.00 0.00 0.00
3 112 14 No. 5 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 0.00 0.00 0.00
3 112 15 No. 2 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 16 No. 21 0.00 0.00 0.00
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset complete with pair of handles.
IRONMONGERY
'Blesbok' Art 460/313 four lever lockset with striking plate fixed to metal complete with a pair of handles.
IRONMONGERY
Art 52/146 cylinder cupboard lockset and escutcheon.
IRONMONGERY
Art 67/146 cylinder drawer lockset and escutcheon.
IRONMONGERY
Art 322/76 four lever dead lock and rebated conversion set and escutcheon.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
IRONMONGERY
Art 123 pull handle.
IRONMONGERY
Art 102 knob.
IRONMONGERY
SLIDING GEAR
IRONMONGERY
Hendersons or similar approved:
IRONMONGERY
Drawer guide 600mm long.
IRONMONGERY
LETTERS, NAMEPLATES, ETC.
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm High letter or numeral.
3 113 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 17 m 8 0.00 0.00 0.00
3 113 FITTINGS 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 18 No. 1 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 0.00 0.00 0.00
3 113 19 No. 2 0.00 0.00 0.00
3 113 20 No. 8 0.00 0.00 0.00
3 113 21 No. 4 0.00 0.00 0.00
3 113 SUNDRIES 0.00 0.00 0.00
3 113 0.00 0.00 0.00
IRONMONGERY
PELMETS AND CURTAIN TRACKS
IRONMONGERY
Yokota or similar approved:
IRONMONGERY
Single curtain track for soffit fixing including eight rollers per metre, brackets, stopped ends, etc.
IRONMONGERY
IRONMONGERY
'Waltons' or similar approved:
IRONMONGERY
240 x 400mm High lockable metal key cabinet with 25 key capacity plugged.
IRONMONGERY
BATHROOM FITTINGS
IRONMONGERY
Solid or similar approved:
IRONMONGERY
20mm Diameter chromium plated towel rail 600mm long including end brackets plugged.
IRONMONGERY
20mm Diameter chromium plated towel rail 1200mm long including end brackets plugged.
IRONMONGERY
Approved chromium plated toilet roll holder plugged.
IRONMONGERY
IRONMONGERY
Solid or similar approved:
3 113 22 No. 8 0.00 0.00 0.00
3 114 23 No. 60 0.00 0.00 0.00
3 114 24 No. 49 0.00 0.00 0.00
3 114 Approved: 0.00 0.00 0.00
3 114 25 No. 8 0.00 0.00 0.00
3 114 26 No. 104 0.00 0.00 0.00
3 114 27 No. 108 0.00 0.00 0.00
3 114 28 No. 16 0.00 0.00 0.00
3 114 29 No. 300 0.00 0.00 0.00
3 114 0.00 0.00 0.00
IRONMONGERY
20mm Diameter chromium plated hanging rail 802mm long including flanged end brackets.
IRONMONGERY
38mm Diameter rubber door stop floor mounted.
IRONMONGERY
38mm Diameter rubber door stop wall mounted.
IRONMONGERY
IRONMONGERY
Raised type adjustable shelving strips 590mm long.
IRONMONGERY
Raised type adjustable shelving strips 709mm long.
IRONMONGERY
Raised type adjustable shelving strips 775mm long.
IRONMONGERY
Raised type adjustable shelving strips 1875mm long.
IRONMONGERY
Shelving studs.
IRONMONGERY
SHELVING UNITS
3 114 0.00 0.00 0.00
3 114 30 No. 6 0.00 0.00 0.00
3 114 31 No. 3 0.00 0.00 0.00
3 114 32 No. 2 0.00 0.00 0.00
IRONMONGERY
Approved industrial steel shelving units with standard epoxy powder coated finish including uprights, open base foot pieces, shelf brackets, shelves, spacers, top rails, top finishing plates and adjustable book clips:
IRONMONGERY
Single shelving unit 1800 x 312 x 1905mm high in 2 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 2700 x 312 x 1905mm high in 3 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
Single shelving unit 3600 x 312 x 1905mm high in 4 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
3 115 33 No. 1 0.00 0.00 0.00
3 115 34 No. 1 0.00 0.00 0.00
3 115 35 No. 1 0.00 0.00 0.00
3 115 36 No. 1 0.00 0.00 0.00
3 115 0.00 0.00 0.00
3 115 0.00 0.00 0.00
IRONMONGERY
Single shelving unit 3600 x 312 x 1295mm high in 4 bays with uprights, each bay 900mm wide with 4 x 312mm shelves.
IRONMONGERY
Single shelving unit 5400 x 312 x 990mm high in 6 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
IRONMONGERY
Single shelving unit 7200 x 312 x 990mm high in 8 bays with uprights, each bay 900mm wide with 3 x 312mm shelves.
IRONMONGERY
Single shelving unit 7200 x 312 x 1905mm high in 8 bays with uprights, each bay 900mm wide with 6 x 312mm shelves.
IRONMONGERY
STEEL LOCKERS
IRONMONGERY
Approved steel lockers with standard baked enamel finish:
3 115 37 No. 3 0.00 0.00 0.00
3 115 0.00 0.00 0.00
3 115 0.00 0.00 0.00
3 115 38 No. 5 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
IRONMONGERY
Teachers cupboard 900 x 450 x 1800mm high with four adjustable shelves.
IRONMONGERY
PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC
IRONMONGERY
Vitrex or similar approved:
IRONMONGERY
System 1000 green writing board 2700 x 1140mm high with chalk rail plugged.
STRUCTURAL STEELWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
STRUCTURAL STEELWORK
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 0.00 0.00 0.00
STRUCTURAL STEELWORK
SUPPLEMENTARY PREAMBLES
STRUCTURAL STEELWORK
All members of trusses shall be properly primed with an approved primer before erecting.
STRUCTURAL STEELWORK
All truss members and purlins shall be wrapped in plastic where built through walls.
STRUCTURAL STEELWORK
Descriptions of bolts shall be deemed to include nuts and washers.
STRUCTURAL STEELWORK
Descriptions of L-shaped and U-shaped anchor bolts shall be deemed to include bending, threading, nuts and washers and embedding in concrete.
STRUCTURAL STEELWORK
Descriptions of expansion anchors and bolts and chemical anchors and bolts shall be deemed to include nuts, washers and mortices in brickwork or concrete.
STRUCTURAL STEELWORK
STEEL TRUSSES ETC
3 117 0.00 0.00 0.00
3 117 1 Kg 4121 0.00 0.00 0.00
3 117 0.00 0.00 0.00
3 117 2 Kg 9 0.00 0.00 0.00
3 118 3 No. 296 0.00 0.00 0.00
3 118 4 No. 74 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 0.00 0.00 0.00
3 118 5 Kg 4172 0.00 0.00 0.00
3 118 6 Kg 2603 0.00 0.00 0.00
STRUCTURAL STEELWORK
Welded roof trusses of angle section rails, struts, braces, cleats, etc and flat section bearer, gusset and connection plates bolted to steel:
STRUCTURAL STEELWORK
Twenty three double pitched trusses 10440 x 1024mm high extreme.
STRUCTURAL STEELWORK
Bolts to trusses etc:
STRUCTURAL STEELWORK
High tensile bolts.
STRUCTURAL STEELWORK
M8 x 100mm Expansion bolt.
STRUCTURAL STEELWORK
12mm Diameter U-shaped anchor bolt 800mm girth.
STRUCTURAL STEELWORK
PURLINS, GIRTS, BRACING, ETC
STRUCTURAL STEELWORK
Purlins and girts bolted to steel:
STRUCTURAL STEELWORK
Lipped channel section purlins.
STRUCTURAL STEELWORK
Lipped channel section brandering.
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 1 No. 24 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 2 Kg 68 0.00 0.00 0.00
METALWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
METALWORK
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
METALWORK
SUNDRY STEELWORK
METALWORK
Sundries, etc:
METALWORK
3 x 30mm Flat section 400mm girth twice bend to form pelmit brackets holed for and plugged to wall.
METALWORK
Welded bearers and framing to ceiling trapdoor:
METALWORK
30 x 30 x 2.5mm Angle section framing.
3 120 3 No. 88 0.00 0.00 0.00
3 120 0.00 0.00 0.00
3 120 4 Kg 55 0.00 0.00 0.00
3 120 5 No. 12 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 6 m 4 0.00 0.00 0.00
3 121 7 m 4 0.00 0.00 0.00
3 121 8 No. 6 0.00 0.00 0.00
3 121 9 No. 6 0.00 0.00 0.00
3 121 10 No. 6 0.00 0.00 0.00
3 121 0.00 0.00 0.00
3 121 11 m² 26 0.00 0.00 0.00
3 121 12 m 146 0.00 0.00 0.00
METALWORK
Extra over 30 x 30 x 2.5mm angle section for welded T-intersection.
METALWORK
Ceiling bearers:
METALWORK
50 x 50 x 5mm Angle section bearers.
METALWORK
Cut and pin end of 50 x 50 x 5mm angle section bearer 100mm deep into brickwork.
METALWORK
Welded bearers and framing to seated bench:
METALWORK
30 x 30 x 2.5mm Hollow section bearers.
METALWORK
30 x 30 x 2.5mm Hollow section framing.
METALWORK
Extra over 30 x 30mm hollow section for mitred L-intersection.
METALWORK
30 x 70 x 3mm Base plate once holed for bolts and welded on.
METALWORK
75mm M8 expansion bolt.
METALWORK
Welded framing and gate to gas store (F28):
METALWORK
Expanded metal Ref. 4
METALWORK
40 x 40 x 5mm Angle section framing.
3 121 13 No. 48 0.00 0.00 0.00
3 121 14 No. 160 0.00 0.00 0.00
3 121 15 No. 48 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 16 No. 1 0.00 0.00 0.00
METALWORK
Extra over 40 x 40 x 5mm for T-intersection.
METALWORK
Extra over 40 x 40 x 5mm for mitred L-intersection.
METALWORK
8mm x 60mm Expansion bolt including all holes.
METALWORK
WELDED SCREENS, GATES, ETC.
METALWORK
Screens and gates:
METALWORK
Single gate 600 x 1165mm high formed of 40 x 40 x 5mm angle section frame, filled in with Ref. 4 expanded metal panel and two 40 x 40 x 5mm angle section posts 1165 long rawl bolted to brick work with and including 10mm diameter bolts at 500mm centres and
3 122 17 No. 19 0.00 0.00 0.00
3 122 18 No. 1 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 19 No. 10 0.00 0.00 0.00
METALWORK
burglar gate 813 x 2032mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 862mm long 12 x 12
METALWORK
Single burglar gate 813 x 2337mm high of 40 x 40 x 2mm hollow section frame and two x 40 x 40 x 2mm hollow section horizontal middle rails filled in with 900mm long 12 x 12 x 2mm hollow section vertical rails at the bottom section and 1167mm long 12 x 12
METALWORK
PRESSED STEEL DOOR FRAMES
METALWORK
1,2mm Double rebated frames suitable for half brick walls:
METALWORK
Frame for door 762 x 2032mm high.
3 122 20 No. 10 0.00 0.00 0.00
3 122 0.00 0.00 0.00
3 122 21 No. 16 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 22 No. 8 0.00 0.00 0.00
3 123 23 No. 6 0.00 0.00 0.00
3 123 24 No. 11 0.00 0.00 0.00
3 123 25 No. 12 0.00 0.00 0.00
3 123 26 No. 9 0.00 0.00 0.00
3 123 27 No. 23 0.00 0.00 0.00
3 123 0.00 0.00 0.00
3 123 0.00 0.00 0.00
METALWORK
Frame for door 813 x 2032mm high.
METALWORK
1,2mm Double rebated frames suitable for one brick walls:
METALWORK
Frame for door 813 x 2032mm high.
METALWORK
STEEL WINDOWS, DOORS, ETC.
METALWORK
Standard residential windows with NBP2 burglar bars to all sections:
METALWORK
Window type E1H, 533 x 654mm high (W8).
METALWORK
Window type NG2, 1022 x 359mm high (W3).
METALWORK
Window type E2H, 1022 x 654mm high (W5).
METALWORK
Window type E4H, 1511 x 654mm high (W2).
METALWORK
Window type C4H, 1511 x 949mm high (W4 & W7).
METALWORK
Window type D4H, 1511 x 1245mm high (W1).
METALWORK
PRESSED STEEL COMBINATION DOORS AND FRAMES
METALWORK
Standard 'Wispeco' chawl door with back panel:
3 123 28 No. 7 0.00 0.00 0.00
3 123 29 No. 2 0.00 0.00 0.00
3 123 30 No. 8 0.00 0.00 0.00
3 123 31 No. 32 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 0.00 0.00 0.00
3 124 32 No. 2 0.00 0.00 0.00
METALWORK
Door 813 x 2032mm high with double rebated frame suitable for one wall and with 'Solid' Besbok 460/313 four lever mortice lock complete with a pair of handles.
METALWORK
Door 813 x 2032mm high and frame with fixed fanlight 305mm high suitable for one wall and with 'Solid' Blesbok 460/313 four lever mortice lock complete with a pair of handles.
METALWORK
Type CBFS frame 1270 x 2553mm high overall.
METALWORK
10mm Diameter spill and plate hinge.
METALWORK
STEEL STRONGROOM DOORS, VENTILATORS, ETC.
METALWORK
'Austin' strongroom doors etc suitable for 230mm walls fixed to brickwork or concrete:
METALWORK
Single ended strongroom ventilator.
3 124 33 No. 1 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 SCREEDS 0.00 0.00 0.00
METALWORK
'Austen' P100 record room door and frame 1031 x 2010mm high overall.
PLASTERING
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PLASTERING
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
PLASTERING
3 126 0.00 0.00 0.00
3 126 1 m² 333 0.00 0.00 0.00
3 126 2 m² 4 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 3 m² 24 0.00 0.00 0.00
3 126 4 m² 5 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 0.00 0.00 0.00
3 126 5 On walls. m² 1451 0.00 0.00 0.00
3 127 6 m² 54 0.00 0.00 0.00
3 127 7 m² 27 0.00 0.00 0.00
3 127 8 m 8 0.00 0.00 0.00
3 127 0.00 0.00 0.00
PLASTERING
Screeds with compressive strength of 25 Mpa steel trowelled on exposed concrete complete with Durashake floor harderner or similar approved applied to the manufacturer's specifications:
PLASTERING
50mm Thick on floors and landings.
PLASTERING
Average 55mm thick on floors to falls and currents.
PLASTERING
GRANOLITHIC
PLASTERING
Untinted granolithic on concrete:
PLASTERING
25mm Thick on floors and landings.
PLASTERING
35mm Thick on floors inside cupboards
PLASTERING
INTERNAL PLASTER
PLASTERING
Cement plaster on brickwork:
PLASTERING
PLASTERING
On walls inside build-in cupboards.
PLASTERING
On narrow widths.
PLASTERING
On sides and top of kerb 450mm girth.
PLASTERING
EXTERNAL PLASTER
3 127 0.00 0.00 0.00
3 127 9 m² 21 0.00 0.00 0.00
3 127 10 m 708 0.00 0.00 0.00
3 127 11 m 89 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 0.00 0.00 0.00
3 127 12 m 23 0.00 0.00 0.00
3 127 13 m 19 0.00 0.00 0.00
3 127 14 m 13 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
PLASTERING
Cement plaster on brickwork:
PLASTERING
On narrow widths.
PLASTERING
On 200mm wide band.
PLASTERING
On sloping top, edge and projecting soffits of sills 505mm girth.
PLASTERING
CORNER PROTECTORS, DIVIDING STRIPS, ETC
PLASTERING
Corner protectors, dividing strips, etc:
PLASTERING
Plaster type galvanised steel corner protectors fixed to brickwork or concrete.
PLASTERING
3 x 35mm Flat section steel weather bar.
PLASTERING
3 x 35mm Flat section steel dividing strips between different floor finishes.
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00
3 TILING 129 1 m 200 0.00 0.00 0.00
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers FlatsSUPPLEMENTARY PREAMBLESDescriptions:Unless described as fixed with adhesive to plaster (plaster elsewhere), descriptions of tiling on brick or concrete walls, columns, etc., shall be deemed to include 1:4 cement plaster backing and descriptions of tiling on concrete floors etc. shall be deeNOSING, JOINT COVERS, PROTECTORS, ETC.Wall edge protectors:'Schluter Schiene Type AE 80' or similar approved brushed aluminium tile edge trim cut to lengths and bedded in tile adhesive.
3 TILING 129 0.00 0.00 0.00
3 TILING 129 0.00 0.00 0.00 3 TILING 129 2 On walls. m² 47 0.00 0.00 0.00
3 TILING 129 3 m² 10 0.00 0.00 0.00
3 TILING 130 4 m 8 0.00 0.00 0.00
3 TILING 130 0.00 0.00 0.00
3 TILING 130 0.00 0.00 0.00
3 TILING 130 5 m² 332 0.00 0.00 0.00
3 TILING 130 6 m² 7 0.00 0.00 0.00
3 TILING 130 7 m² 2 0.00 0.00 0.00
3 TILING 130 8 m 200 0.00 0.00 0.00
3 TILING 130 9 No. 10 0.00 0.00 0.00
WALL TILING
200 x 200mm 'Dimo Top' unglazed ceramic tiles fixed with adhesive to plaster (plaster elsewhere) and flush pointed with tinted jointing compound:
On walls in isolated panels, splashbacks, etc.On sides and top of kerb 450mm girthCERAMIC FLOOR TILING
300 x 300mm 'Dimo Top' unglazed floor tiles on 15mm bedding on concrete and flush pointed with tinted waterproof jointing compound:On floors and landings..
On vanity slabs, cupboard slabs, cover slabs, etc.On narrow widths.100mm high cut tile skirting.Cutting and fitting around WC.
3 TILING 130 10 No. 5 0.00 0.00 0.00
3 TILING 130 0.00 0.00 0.00 3 TILING 130 11 On floors. m² 4 0.00 0.00 0.00 3 TILING 130 SUNDRIES 0.00 0.00 0.00 3 TILING 130 Sundries: 0.00 0.00 0.00
3 TILING 130 12 m 15 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 0.00 0.00 0.00
3 TILING 131 13 No. 8 0.00 0.00 0.00
3 133 0.00 0.00 0.00
cutting tiles around 435 x 335mm laboratory sink.
Mosaic glazed floor tiles fixed with adhesive to bedding (bedding elsewhere) and flush pointed with epoxy mortar:
'Schluter Rondec' aluminium tile edging.TOILET PAPER HOLDERS, ETC.White glazed ceramic:150 x 150mm Semi-recessed soap dish.
PLUMBING AND DRAINAGE
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 133 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 1 No. 1 0.00 0.00 0.00
3 133 0.00 0.00 0.00
3 133 2 No. 10 0.00 0.00 0.00
3 133 3 No. 10 0.00 0.00 0.00
3 133 0.00 0.00 0.00
PLUMBING AND DRAINAGE
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
PLUMBING AND DRAINAGE
SANITARY FITTINGS
PLUMBING AND DRAINAGE
Stainless steel for urinals, basins, quality sinks, wash troughs, institutional equipment, etc shall be type 304 (18/8).
PLUMBING AND DRAINAGE
Approved stainless steel:
PLUMBING AND DRAINAGE
Type SEB-B sink and drainer 1200 x 535mm wide with one bowl.
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
Springbok code 0112 wash hand basin with code 811820 cast iron brackets.
PLUMBING AND DRAINAGE
Low level WC suite comprising of Protea pan with double flap heavy duty plastic seat and cover and 9l cistern with flush pipe.
PLUMBING AND DRAINAGE
'Citimetal' stainless steel:
3 133 4 No. 8 0.00 0.00 0.00
3 133 5 No. 8 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 6 No. 5 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 7 No. 19 0.00 0.00 0.00
3 134 8 No. 8 0.00 0.00 0.00
3 134 TRAPS ETC 0.00 0.00 0.00
3 134 uPVC: 0.00 0.00 0.00
3 134 9 No. 8 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 10 No. 10 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 11 No. 9 0.00 0.00 0.00
PLUMBING AND DRAINAGE
Model DC 101 laundry trough on mild steel brackets and support (elsewhere measured).
PLUMBING AND DRAINAGE
Type SEB-B sink and drainer 1200 x 535mm wide with one bowl.
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
435 x 335mm Springbok 2345 laboratory sink.
PLUMBING AND DRAINAGE
WASTE UNIONS ETC
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved:
PLUMBING AND DRAINAGE
40mm 'Cobra' 041 sink or basin waste outlet.
PLUMBING AND DRAINAGE
40mm 'Cobra' 310 sink waste outlet.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
40mm Deep seal 'P' or 'S' trap.
PLUMBING AND DRAINAGE
'Cobra Watertech' or similar approved:
PLUMBING AND DRAINAGE
32mm 340 CP bottle trap.
PLUMBING AND DRAINAGE
'Castle' Brass or similar approved:
PLUMBING AND DRAINAGE
40mm 'P' trap.
3 134 12 No. 8 0.00 0.00 0.00
3 134 0.00 0.00 0.00
3 134 13 No. 5 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 14 No. 46 0.00 0.00 0.00
3 135 15 No. 20 0.00 0.00 0.00
3 135 16 No. 8 0.00 0.00 0.00
3 135 17 No. 9 0.00 0.00 0.00
3 135 18 No. 5 0.00 0.00 0.00
3 135 19 No. 8 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 uPVC: 0.00 0.00 0.00
PLUMBING AND DRAINAGE
40mm No 360 P/8 shower trap with 331 grating.
PLUMBING AND DRAINAGE
'Vaal' or similar approved:
PLUMBING AND DRAINAGE
Code 8790Z0 Acid resistant waste fitting comprising of waste, overflow pipe, etc.
PLUMBING AND DRAINAGE
TAPS, VALVES, ETC
PLUMBING AND DRAINAGE
'Cobra Watertech or similar approved':
PLUMBING AND DRAINAGE
15mm Star 232/350CP angle regulating valve.
PLUMBING AND DRAINAGE
15mm Star 111 pilartap.
PLUMBING AND DRAINAGE
20mm Star 107EC bibtap.
PLUMBING AND DRAINAGE
15mm Star 166/041 sink mixer.
PLUMBING AND DRAINAGE
15mm 115/046 Star laboratory tap.
PLUMBING AND DRAINAGE
15mm Star 431 showerset comprising of No 027 overhead showerarm with 068BJ shower rose and ball joint and two 15mm Star No 128 ECCP under tile stopcocks.
PLUMBING AND DRAINAGE
SANITARY PLUMBING
PLUMBING AND DRAINAGE
3 135 20 m 8 0.00 0.00 0.00
3 135 21 m 74 0.00 0.00 0.00
3 135 0.00 0.00 0.00
3 135 22 No. 24 0.00 0.00 0.00
3 135 23 No. 12 0.00 0.00 0.00
3 136 Gulleys: 0.00 0.00 0.00
3 136 24 No. 9 0.00 0.00 0.00
3 136 Sundries: 0.00 0.00 0.00
3 136 25 No. 10 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 26 m 25 0.00 0.00 0.00
3 136 27 m 4 0.00 0.00 0.00
3 136 28 m 31 0.00 0.00 0.00
3 136 29 m 29 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Pipes vertically or ramped to cleaning eyes etc (no excavation).
PLUMBING AND DRAINAGE
110mm Pipes laid in and including trenches not exceeding 1m deep.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
110mm Bend.
PLUMBING AND DRAINAGE
110mm Access junction.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
110mm Overflow gulley not exceeding 1m deep.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
100mm Cast iron 'ABC' cleaning eye.
PLUMBING AND DRAINAGE
SOIL DRAINAGE
PLUMBING AND DRAINAGE
uPVC pipes:
PLUMBING AND DRAINAGE
40mm Pipes.
PLUMBING AND DRAINAGE
40mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
50mm Pipes.
PLUMBING AND DRAINAGE
50mm Pipes under floors laid in and including trenches.
3 136 30 m 7 0.00 0.00 0.00
3 136 31 m 2 0.00 0.00 0.00
3 136 0.00 0.00 0.00
3 136 32 No. 28 0.00 0.00 0.00
3 136 33 No. 18 0.00 0.00 0.00
3 136 34 No. 18 0.00 0.00 0.00
3 137 35 No. 4 0.00 0.00 0.00
3 137 36 No. 8 0.00 0.00 0.00
3 137 37 No. 9 0.00 0.00 0.00
3 137 38 No. 34 0.00 0.00 0.00
3 137 39 No. 4 0.00 0.00 0.00
3 137 40 No. 9 0.00 0.00 0.00
3 137 41 No. 18 0.00 0.00 0.00
3 137 42 No. 12 0.00 0.00 0.00
3 137 43 No. 10 0.00 0.00 0.00
3 137 44 No. 8 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Pipes.
PLUMBING AND DRAINAGE
110mm Pipes under floors laid in and including trenches.
PLUMBING AND DRAINAGE
Extra over uPVC pipes for fittings:
PLUMBING AND DRAINAGE
40mm Bend.
PLUMBING AND DRAINAGE
40mm Access bend.
PLUMBING AND DRAINAGE
50mm Access bend.
PLUMBING AND DRAINAGE
50mm Junction.
PLUMBING AND DRAINAGE
50 x 50 x 40mm Reducing junction.
PLUMBING AND DRAINAGE
50mm 'GI Two-way' vent valve.
PLUMBING AND DRAINAGE
50mm Bend.
PLUMBING AND DRAINAGE
110mm End cap.
PLUMBING AND DRAINAGE
110mm Reducer.
PLUMBING AND DRAINAGE
110mm Bend.
PLUMBING AND DRAINAGE
110mm Junction.
PLUMBING AND DRAINAGE
110mm Pan connector.
PLUMBING AND DRAINAGE
110mm Stubstack consisting of two x 110mm, one x 40mm inlets, necessary pipe and all fittings.
3 137 45 No. 5 0.00 0.00 0.00
3 137 Sundries: 0.00 0.00 0.00
3 137 46 Item 1 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 47 m 65 0.00 0.00 0.00
3 138 48 m 145 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 49 No. 124 0.00 0.00 0.00
3 138 50 No. 139 0.00 0.00 0.00
3 138 51 No. 9 0.00 0.00 0.00
3 138 52 No. 1 0.00 0.00 0.00
3 138 0.00 0.00 0.00
3 138 0.00 0.00 0.00
PLUMBING AND DRAINAGE
110mm Stubstack consisting of one x 110mm, two x 40mm, two x 50mm inlets, necessary pipe and all fittings.
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing waste pipe system.
PLUMBING AND DRAINAGE
WATER SUPPLIES
PLUMBING AND DRAINAGE
Class O copper pipes:
PLUMBING AND DRAINAGE
15mm Pipes.
PLUMBING AND DRAINAGE
22mm Pipes.
PLUMBING AND DRAINAGE
Extra over class O copper pipes for capillary fittings:
PLUMBING AND DRAINAGE
15mm Fittings.
PLUMBING AND DRAINAGE
22mm Fittings.
PLUMBING AND DRAINAGE
Connection of 22mm pipe to 35mm HDPE pipe.
PLUMBING AND DRAINAGE
Connection of 22mm pipe to 25mm HDPE pipe.
PLUMBING AND DRAINAGE
ELECTRIC WATER HEATERS
PLUMBING AND DRAINAGE
'Kwikot' or similar approved:
3 138 53 No. 1 0.00 0.00 0.00
3 138 54 No. 8 0.00 0.00 0.00
3 138 TESTING 0.00 0.00 0.00
3 138 Testing: 0.00 0.00 0.00
3 138 55 Item 1 0.00 0.00 0.00
3 139 0.00 0.00 0.00
3 139 'Chubb': 0.00 0.00 0.00
3 139 56 No. 14 0.00 0.00 0.00
3 141 0.00 0.00 0.00
PLUMBING AND DRAINAGE
50 Litre horizontal wall mounted electric water heater complete with airvalve, etc..
PLUMBING AND DRAINAGE
100Litre horizontal wall mounted electric water heater complete with airvalve, etc..
PLUMBING AND DRAINAGEPLUMBING AND DRAINAGEPLUMBING AND DRAINAGE
Testing water pipe system.
PLUMBING AND DRAINAGE
FIRE APPLIANCES ETC.
PLUMBING AND DRAINAGE
PLUMBING AND DRAINAGE
9kg Dry chemical fire extinguisher with backing board.
ELECTRICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
3 141 0.00 0.00 0.00
3 141 0.00 0.00 0.00
3 141 0.00 0.00 0.00
3 141 1 No. 11 0.00 0.00 0.00
3 141 2 No. 14 0.00 0.00 0.00
3 141 3 No. 20 0.00 0.00 0.00
3 141 4 No. 1 0.00 0.00 0.00
3 141 5 No. 2 0.00 0.00 0.00
3 141 6 No. 1 0.00 0.00 0.00
3 141 7 No. 1 0.00 0.00 0.00
3 142 8 No. 9 0.00 0.00 0.00
ELECTRICAL WORK
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
ELECTRICAL WORK
DISTRIBUTION BOARDS
ELECTRICAL WORK
Lockable distribution board complete with sheetmetal tray, frames, sub-frames, busbars, provision for two future circuit breakers, legend card and 25mm pad lock:
ELECTRICAL WORK
Distribution board build into wall.
ELECTRICAL WORK
10A Single pole circuit breaker.
ELECTRICAL WORK
15A Single pole circuit breaker.
ELECTRICAL WORK
15A Double pole circuit breaker.
ELECTRICAL WORK
15A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
20A Single pole circuit breaker.
ELECTRICAL WORK
20A Double pole main switch isolator.
ELECTRICAL WORK
25A Single pole circuit breaker.
3 142 9 No. 8 0.00 0.00 0.00
3 142 10 No. 1 0.00 0.00 0.00
3 142 11 No. 1 0.00 0.00 0.00
3 142 CABLES 0.00 0.00 0.00
3 142 0.00 0.00 0.00
3 142 12 m 33 0.00 0.00 0.00
3 142 0.00 0.00 0.00
3 142 0.00 0.00 0.00
3 142 13 No. 11 0.00 0.00 0.00
3 142 EARTHING 0.00 0.00 0.00
3 142 0.00 0.00 0.00
3 142 14 m 3 0.00 0.00 0.00
3 142 15 m 18 0.00 0.00 0.00
3 142 0.00 0.00 0.00
ELECTRICAL WORK
25A Earth leakage and circuit breaker combination.
ELECTRICAL WORK
63A Double pole main switch isolator.
ELECTRICAL WORK
63A Double pole earth leakage with 30mA security.
ELECTRICAL WORK
ELECTRICAL WORK
V PVC/SWA/PVC copper cable pulled in cable sleeves (sleeves measured elsewhere):
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
CABLE TERMINATIONS
ELECTRICAL WORK
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables:
ELECTRICAL WORK
16mm2 2-Core.
ELECTRICAL WORK
ELECTRICAL WORK
Bare copper earth conductor installed with cable (cable measured elsewhere):
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
EARTH CONDUCTOR TERMINATION
3 142 0.00 0.00 0.00
3 142 16 No. 1 0.00 0.00 0.00
3 143 17 No. 17 0.00 0.00 0.00
3 143 SLEEVES 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 18 m 18 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 19 m 18 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 20 No. 11 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 21 m 420 0.00 0.00 0.00
3 143 0.00 0.00 0.00
ELECTRICAL WORK
Termination for bare and PVC insulated copper conductors including lugs and connections:
ELECTRICAL WORK
6mm2 Conductor.
ELECTRICAL WORK
10mm2 Conductor.
ELECTRICAL WORK
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
ELECTRICAL WORK
50mm Diameter pipe.
ELECTRICAL WORK
Extra on UPVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
BLACK ENAMELLED CONDUIT
ELECTRICAL WORK
Suspended from steel trusses or concrete slab with and including hangers not exceeding 1000mm long and not exceeding 3000mm above floor level:
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
RIGID PVC CONDUIT
3 143 0.00 0.00 0.00
3 143 22 m 243 0.00 0.00 0.00
3 143 0.00 0.00 0.00
3 143 23 m 231 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 24 No. 80 0.00 0.00 0.00
3 144 25 No. 20 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 26 No. 4 0.00 0.00 0.00
3 144 27 No. 34 0.00 0.00 0.00
3 144 28 No. 76 0.00 0.00 0.00
3 144 29 No. 2 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 0.00 0.00 0.00
3 144 30 2.5mm². m 801 0.00 0.00 0.00
ELECTRICAL WORK
Cast in concrete, surface bed or screed:
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level:
ELECTRICAL WORK
20mm Diameter.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
Black enameled fixed onto conduit:
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
Metal type fixed onto PVC conduit:
ELECTRICAL WORK
Round conduit box for 20mm diameter conduit.
ELECTRICAL WORK
100 x 50 x 50mm Deep box.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Round conduit box cover.
ELECTRICAL WORK
CONDUCTORS
ELECTRICAL WORK
Bare stranded copper earth conductor drawn into wireways:
ELECTRICAL WORK
3 144 0.00 0.00 0.00
3 144 31 1.5mm². m 26 0.00 0.00 0.00
3 144 32 2.5mm². m 1077 0.00 0.00 0.00
3 144 33 4mm². m 654 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 34 No. 9 0.00 0.00 0.00
3 145 35 No. 1 0.00 0.00 0.00
3 145 36 No. 34 0.00 0.00 0.00
3 145 37 No. 2 0.00 0.00 0.00
3 145 38 No. 16 0.00 0.00 0.00
3 145 39 No. 46 0.00 0.00 0.00
3 145 40 No. 9 0.00 0.00 0.00
3 145 41 No. 1 0.00 0.00 0.00
ELECTRICAL WORK
PVC insulated stranded copper conductor drawn into wireways:
ELECTRICAL WORKELECTRICAL WORKELECTRICAL WORK
ELECTRICAL WORK
LIGHT SWITCHES, SWITCHED SOCKET OUTLETS, ETC.
ELECTRICAL WORK
Switches, etc. complete with cover plate fixed in flush box:
ELECTRICAL WORK
5A Three-pin unswitched socket outlet.
ELECTRICAL WORK
10A Day light switch.
ELECTRICAL WORK
16A One-lever one-way switch.
ELECTRICAL WORK
16A Two-lever one-way switch.
ELECTRICAL WORK
16A One-lever two-way switch.
ELECTRICAL WORK
16A Three-pin switched socket outlet.
ELECTRICAL WORK
30A Double-pole isolator.
ELECTRICAL WORK
100VA Transformer with overload and short circuit protection, with 4mm² cabling to Zehender RG07 terminal post in a star-configuration.
3 145 0.00 0.00 0.00
3 145 0.00 0.00 0.00
3 145 42 No. 30 0.00 0.00 0.00
3 145 43 No. 23 0.00 0.00 0.00
3 145 44 No. 35 0.00 0.00 0.00
3 146 45 No. 8 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 46 No. 9 0.00 0.00 0.00
3 146 SLEEVES 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 47 m 5 0.00 0.00 0.00
3 146 0.00 0.00 0.00
ELECTRICAL WORK
LUMINARIES AND EQUIPMENT
ELECTRICAL WORK
Luminaries or equipment complete with bulbs, connections, etc., mounted in position:
ELECTRICAL WORK
'Lascon B10' ceiling mounted light fitting and bulb. (Type A)
ELECTRICAL WORK
'Lascon B10' wall mounted light fitting and bulb. (Type B)
ELECTRICAL WORK
Double tube 58W open channel fluoresent light and fitting 1200mm long (Type C).
ELECTRICAL WORK
Pre-paid meter and box.
ELECTRICAL WORK
COMMUNICATIONS
ELECTRICAL WORK
Telephone distribution boxes:
ELECTRICAL WORK
300 x 300 x 100mm Deep box.
ELECTRICAL WORK
ELECTRICAL WORK
PVC sleeve chased or built into wall:
ELECTRICAL WORK
50mm Diameter pipe including draw wire.
ELECTRICAL WORK
PVC sleeve in ground including excavations, backfilling, etc.:
3 146 48 m 14 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 49 No. 9 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 50 m 35 0.00 0.00 0.00
3 146 0.00 0.00 0.00
3 146 51 m 6 0.00 0.00 0.00
3 146 52 No. 9 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 53 No. 5 0.00 0.00 0.00
3 147 54 No. 5 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 55 No. 8 0.00 0.00 0.00
3 147 56 No. 8 0.00 0.00 0.00
3 147 0.00 0.00 0.00
3 147 0.00 0.00 0.00
ELECTRICAL WORK
50mm Diameter pipe including draw wire.
ELECTRICAL WORK
Extra on UPVC piping for:
ELECTRICAL WORK
50mm Diameter long radius bend.
ELECTRICAL WORK
RIGID PVC CONDUIT
ELECTRICAL WORK
Cast in concrete, surface bed or screed:
ELECTRICAL WORK
20mm Diameter including draw wire.
ELECTRICAL WORK
Chased and/or fixed in brickwork not exceeding 3000mm above floor level:
ELECTRICAL WORK
20mm Diameter including draw wire.
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
CONDUIT BOXES AND FITTINGS
ELECTRICAL WORK
PVC type fixed onto conduit:
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Cover plate for 100mm x 100mm box.
ELECTRICAL WORK
Metal type fixed onto conduit:
ELECTRICAL WORK
100 x 100 x 50mm Deep box.
ELECTRICAL WORK
Cover plate for 100mm x 100mm box.
ELECTRICAL WORK
EARTHING SYSTEM
ELECTRICAL WORK
Conductors, etc.:
3 147 57 m 155 0.00 0.00 0.00
3 147 58 No. 13 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
ELECTRICAL WORK
6mm² Bare stranded copper conductor drawn into conduiting (conduiting measured elsewhere).
ELECTRICAL WORK
Steel core reinforced copper spike (rod) 2000 x 16mm diameter and brass coupling with driving cap driven into ground.
MECHANICAL WORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
MECHANICAL WORK
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
MECHANICAL WORK
SUPPLEMENTARY PREAMBLES
MECHANICAL WORK
User Notes:
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 1 No. 9 0.00 0.00 0.00
3 149 2 No. 9 0.00 0.00 0.00
3 149 TAPS, ETC 0.00 0.00 0.00
3 149 0.00 0.00 0.00
3 149 3 No. 5 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 4 m 33 0.00 0.00 0.00
3 150 0.00 0.00 0.00
3 150 5 No. 1 0.00 0.00 0.00
3 150 6 No. 9 0.00 0.00 0.00
3 150 7 15mm Tee. No. 5 0.00 0.00 0.00
3 150 8 No. 9 0.00 0.00 0.00
MECHANICAL WORK
All pipes and fittings to be welded with silver solder.
MECHANICAL WORK
Pipe system to be purged with compressed air before use.
MECHANICAL WORK
VALVES, ETC
MECHANICAL WORK
'Afrox' or other approved:
MECHANICAL WORK
15mm Brass ball valve.
MECHANICAL WORK
15mm Chrome gas angle valve.
MECHANICAL WORK
MECHANICAL WORK
'Brownall or other approved:
MECHANICAL WORK
Type CL 1265M two way gas cock.
MECHANICAL WORK
GAS SUPPLIES
MECHANICAL WORK
Class O copper pipes:
MECHANICAL WORK
15mm Pipes fixed to wall.
MECHANICAL WORK
Extra over class O copper pipes for fittings:
MECHANICAL WORK
15mm stop plug.
MECHANICAL WORK
15mm Wall plate elbow.
MECHANICAL WORK
MECHANICAL WORK
15mm BSP male connector.
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 1 m² 61 0.00 0.00 0.00
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 2 m² 3 0.00 0.00 0.00
3 GLAZING 152 0.00 0.00 0.00
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers FlatsGLAZING TO STEEL WITH PUTTY4mm Clear float glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.4mm Obscure glass:
Panes exceeding 0,1m2 and not exceeding 0,5m2.TOPS, SHELVES, DOORS, MIRRORS, ETC.
3 GLAZING 152 0.00 0.00 0.00
3 GLAZING 152 3 No. 10 0.00 0.00 0.00
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
6mm Silvered float glass copper backed mirrors with polished edges holed for and fixed with chromium plated dome capped mirror screws with rubber buffers to plugs in brickwork or concrete:Mirror 450 x 600 mm high with four screws.
PAINTWORK
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
PAINTWORK
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
PAINTWORK
SUPPLEMENTARY PREAMBLES
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
PAINTWORK
All work to be executed in strict accordance with the specifications of Plascon Paints (Pty) Ltd. The coating systems are as per Plascon's 'List of Decorative Paint Products' unless otherwise specified. Full specifications are available on request from Pl
PAINTWORK
Primers and first coats may be thinned in accordance with the paint specifications of Plascon Paints (Pty) Ltd to aid the absorption of the paint.
PAINTWORK
All surfaces must be sound, clean and have a moisture content of less than 8% for walls generally and 3% for slabs/screeds etc.
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
PAINTWORK
Where surfaces of plaster etc are sandy / friable, the first coat must be replaced with 'Plascon Merit' plaster primer thinned 10% with turpentine.
PAINTWORK
All paints are to bear the SABS mark and are to be applied in strict accordance with manufacturer's instructions.
PAINTWORK
Prices for paintwork are to include for masking and protecting of all finished paintwork and all finished joinery, tiling, floor coverings, etc. during painting. Any damage to such finished work shall be removed, repaired or replaced at the Contractor's e
3 153 0.00 0.00 0.00
3 153 0.00 0.00 0.00
PAINTWORK
Prices for painting are to include for painting a one square metre sample panel of all finishing coats and for repeating if required. Only after written approval from Architect may finishing coats be applied.
PAINTWORK
Prices for all paintwork are to include all colours which have a value of 8 or higher on the Munsell system in accordance with the relevant SABS specification.
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 1 m² 74 0.00 0.00 0.00
3 154 2 m 708 0.00 0.00 0.00
3 154 0.00 0.00 0.00
PAINTWORK
The Contractor shall provide all necessary dust sheets, covers, etc. required during painting. All door handles, locks and other ironmongery, pelmets, electrical switch and socket covers, etc. are to be removed before commencing the painting. All paint sp
PAINTWORK
ON FLOATED PLASTER
PAINTWORK
One coat primer and two coats exterior quality PVA emulsion paint:
PAINTWORK
On external floated plaster walls.
PAINTWORK
On external mouldings and bands not exceeding 300mm wide or girth in colours differing form surrounding work.
PAINTWORK
One coat alkali resistant primer, one undercoat and two coats eggshell enamel paint:
3 154 3 m² 1436 0.00 0.00 0.00
3 154 4 m 221 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 5 m² 323 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 0.00 0.00 0.00
3 154 6 m² 17 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 7 m 53 0.00 0.00 0.00
3 155 ON METAL 0.00 0.00 0.00
PAINTWORK
On internal floated plaster walls.
PAINTWORK
On internal mouldings and bands not exceeding 300 mm wide or girth in colours differing from surrounding work.
PAINTWORK
ON BLOCK BRUSHED BRICKWORK
PAINTWORK
One coat primer and two coats exterior quality PVA emulsion paint:
PAINTWORK
On external block brushed brick walls.
PAINTWORK
ON SOFT BOARD
PAINTWORK
One filler coat and two coats exterior quality PVA emulsion paint:
PAINTWORK
On pinning boards.
PAINTWORK
ON FIBRE-CEMENT
PAINTWORK
One coat alkali resistant primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
On cills not exceeding 300 mm girth.
PAINTWORK
3 155 0.00 0.00 0.00
3 155 8 m² 73 0.00 0.00 0.00
3 155 9 m² 40 0.00 0.00 0.00
3 155 10 m² 160 0.00 0.00 0.00
3 155 0.00 0.00 0.00
3 155 11 m² 89 0.00 0.00 0.00
3 155 12 m² 264 0.00 0.00 0.00
3 155 13 m 11 0.00 0.00 0.00
PAINTWORK
Spot priming defects in pre-primed surfaces with zinc chromate primer and applying one undercoat and two coats enamel paint on steel:
PAINTWORK
On door frames.
PAINTWORK
On combination doors and frames.
PAINTWORK
On windows with burglar bars.
PAINTWORK
One coat calcium plumbate primer, one undercoat and two coats enamel paint on steel:
PAINTWORK
On gates, grilles, burglar screens, balustrades, etc (both sides measured over the full flat area).
PAINTWORK
On members of roof trusses.
PAINTWORK
On rails, bars, pipes, etc not exceeding 300 mm girth.
3 155 0.00 0.00 0.00
3 155 14 m² 671 0.00 0.00 0.00
3 156 ON WOOD 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 15 On doors. m² 179 0.00 0.00 0.00
3 156 16 m² 90 0.00 0.00 0.00
3 156 17 m 98 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 18 m² 2 0.00 0.00 0.00
PAINTWORK
Wash down with approved cleaning agent and apply one coat calcium plumbate primer, one undercoat and two coats enamel paint on galvanised steel:
PAINTWORK
On IBR profiled sheeting ceiling (measured on flat).
PAINTWORK
PAINTWORK
One coat wood primer, one undercoat and two coats eggshell enamel paint:
PAINTWORK
PAINTWORK
On general surfaces of fittings.
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
Three coats clear varnish:
PAINTWORK
On open slatted shelves, seats, etc of 32 x 68 mm slats at 79mm centres (both sides measured over the full flat area).
3 156 19 m 558 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 0.00 0.00 0.00
3 156 20 No. 21 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 1 Holes. m3 0.3 0.00 0.00 0.00
3 158 0.00 0.00 0.00
PAINTWORK
On skirtings, rails, etc not exceeding 300 mm girth.
PAINTWORK
SIGNWRITING
PAINTWORK
Suitable paint on plaster:
PAINTWORK
Numeral or letter 500mm high.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
EXTERNAL WORKS
The Following bills cater for:
A:1 x 3 Classroom BlocksB:1 x Specialist ClassroomC:1 x Administration BlockD:4 x Teachers Flats
EXTERNAL WORKS
THE FOLLOWING IN FLAG POLE
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
25Mpa/19mm Unreinforced Concrete:
3 158 2 m3 0.37 0.00 0.00 0.00
3 158 3 m3 0.3 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 4 m² 3 0.00 0.00 0.00
3 158 0.00 0.00 0.00
3 158 5 m 7 0.00 0.00 0.00
3 159 Bolts: 0.00 0.00 0.00
3 159 6 No. 2 0.00 0.00 0.00
3 159 Flagpole: 0.00 0.00 0.00
3 159 7 m 5 0.00 0.00 0.00
3 159 8 No. 2 0.00 0.00 0.00
3 159 9 No. 1 0.00 0.00 0.00
3 159 10 No. 1 0.00 0.00 0.00
3 159 11 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
Flagpole bases.
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a steel trowel:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Rough Formwork to Sides:
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide.
EXTERNAL WORKS
EXTERNAL WORKS
M10 x 75mm Bolts.
EXTERNAL WORKS
EXTERNAL WORKS
50mm Diameter galvanised pipe.
EXTERNAL WORKS
100 x 40 x 2.5mm Channel 2000mm long and cast into concrete 500mm deep.
EXTERNAL WORKS
6mm Diameter bend eye 35mm girth welded to 50mm diameter flagpole.
EXTERNAL WORKS
Fixing hook formed with two 6mm Diameter round bar bend to right angles 45mm and welded to upright.
EXTERNAL WORKS
Extra over 50mm diameter pipe for closed end.
3 159 0.00 0.00 0.00
3 159 12 m 10 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 13 Trenches. m³ 61 0.00 0.00 0.00
3 159 0.00 0.00 0.00
3 159 14 Soft rock. m³ 6 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 15 m² 140 0.00 0.00 0.00
3 160 0.00 0.00 0.00
EXTERNAL WORKS
Paint one coat calcium plumbate primer, one undercoat and two coats alkyd enamel paint on galvanised steel:
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
EXTERNAL WORKS
THE FOLLOWING IN YARD WALL
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Extra over excavations other than bulk in earth for excavation in:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
3 160 16 m³ 20 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 17 m² 61 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 18 m² 92 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 19 m³ 32 0.00 0.00 0.00
EXTERNAL WORKS
Off site to a dumping site to be found by the Contractor.
EXTERNAL WORKS
Surface Preparation:
EXTERNAL WORKS
Trim and level off surface of excavated surfaces to receive concrete footings, including ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at least 95% Mod. AASHTO maximum density.
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar in foundations:
EXTERNAL WORKS
One brick walls.
EXTERNAL WORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Behind retaining walls.
3 160 0.00 0.00 0.00
3 160 20 m² 307 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 21 m³ 14 0.00 0.00 0.00
3 160 0.00 0.00 0.00
3 160 22 m² 307 0.00 0.00 0.00
3 161 0.00 0.00 0.00
3 161 23 m 1023 0.00 0.00 0.00
3 161 24 m 511 0.00 0.00 0.00
3 161 0.00 0.00 0.00
3 161 25 m² 307 0.00 0.00 0.00
3 161 0.00 0.00 0.00
EXTERNAL WORKS
Fair face to brickwork in horizontal stretcher bond pointed with recessed horizontal and flush vertical joints:
EXTERNAL WORKS
Extra for fair face.
EXTERNAL WORKS
25Mpa/19mm Concrete:
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Cement wash of 1:3 liquid cement and sand mixture applied with a brush:
EXTERNAL WORKS
On brick surfaces.
EXTERNAL WORKS
Brickwork reinforcement:
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally in foundations.
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally.
EXTERNAL WORKS
One coat primer and two coats exterior quality PVA emulsion paint:
EXTERNAL WORKS
On external block brushed brick walls.
EXTERNAL WORKS
BRICK PAVING
3 161 0.00 0.00 0.00
3 161 26 m² 99 0.00 0.00 0.00
3 161 27 m 8 0.00 0.00 0.00
3 161 0.00 0.00 0.00
3 161 28 m 20 0.00 0.00 0.00
3 161 29 m 20 0.00 0.00 0.00
3 161 uPVC: 0.00 0.00 0.00
3 161 30 m 25 0.00 0.00 0.00
EXTERNAL WORKS
Paving of 50mm thick cement paving bricks with open joints on 50mm thick river sand bed with sand and cement mixture swept into joints, hosed down and pointed with slightly keyed joints including termite and soil posioning, preparation of ground or fillin
EXTERNAL WORKS
Paving in fish bone patern.
EXTERNAL WORKS
110mm Wide brick-on-end edging on 100mm thick concrete bed.
EXTERNAL WORKS
SOIL DRAINAGE
EXTERNAL WORKS
110mm Slotted uPVC agriculture pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
110mm Pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
EXTERNAL WORKS
110mm Pipes laid in and including trenches.
3 161 31 m 80 0.00 0.00 0.00
3 162 32 m 80 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 33 No. 5 0.00 0.00 0.00
3 162 34 No. 20 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 35 No. 1 0.00 0.00 0.00
3 162 36 No. 5 0.00 0.00 0.00
3 162 0.00 0.00 0.00
3 162 37 No. 2 0.00 0.00 0.00
3 162 38 No. 4 0.00 0.00 0.00
3 162 FENCING 0.00 0.00 0.00
EXTERNAL WORKS
110mm Slotted uPVC agriculture pipes laid in trenches (elsewhere measured).
EXTERNAL WORKS
110mm Pipes laid in and including trenches not exceeding 1m deep.
EXTERNAL WORKS
Extra over uPVC pipes for fittings:
EXTERNAL WORKS
110mm End cap.
EXTERNAL WORKS
110mm Junction.
EXTERNAL WORKS
Inspection chambers (covers elsewhere):
EXTERNAL WORKS
Inspection chamber 450 x 450mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Inspection chamber 450 x 600mm and not exceeding 750mm deep internally.
EXTERNAL WORKS
Gratings, covers, etc:
EXTERNAL WORKS
450 x 450mm x 45kg Cast iron single seal manhole cover and frame.
EXTERNAL WORKS
450 x 450mm x 53kg Cast iron single seal manhole cover and frame.
EXTERNAL WORKS
3 162 0.00 0.00 0.00
3 162 39 No. 40 0.00 0.00 0.00
3 162 40 m 320 0.00 0.00 0.00
3 163 41 No. 32 0.00 0.00 0.00
EXTERNAL WORKS
Wire mesh fencing, gates, etc. including two coats aluminium paint on metal stays, framing, etc:
EXTERNAL WORKS
Inclined stay 1500m long with one end bolted to post and other end with sole plate in and including concrete base
EXTERNAL WORKS
Fencing formed of 50mm Ø posts 1800mm long with concrete base at maximum 3500mm centres and with droppers 1350m long at maximum 1500mm centres and 4 strands of galvanised wire tied to intermediates, posts and eye bolts, the 1350mm vertical height covered
EXTERNAL WORKS
Corner or gate post 2020mm high projecting 1350mm above ground with cap and other end with sole plate in and including concrete base
3 163 42 No. 8 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 43 m 64 0.00 0.00 0.00
3 163 44 No. 16 0.00 0.00 0.00
3 163 45 No. 16 0.00 0.00 0.00
3 163 46 No. 16 0.00 0.00 0.00
EXTERNAL WORKS
Double gate 3054 x 1200mm high, each leaf with one intermediate stile and two diagonal braces and the vertical section covered with galvanised wire mesh fixed to framing, etc. including heavy duty hasp and staple, barrel bolts, etc.
EXTERNAL WORKS
THE FOLLOWING IN WASHING LINE
EXTERNAL WORKS
Washing line including two coats aluminium paint on metal stays, framing, etc:
EXTERNAL WORKS
2mm Plastic coated steel clothes line drawn tight.
EXTERNAL WORKS
8mm Eye bolt welded to horisontal post.
EXTERNAL WORKS
8mm Hook bolt welded to horisontal post.
EXTERNAL WORKS
150mm Long turning buckle.
3 163 47 No. 8 0.00 0.00 0.00
3 163 48 No. 8 0.00 0.00 0.00
3 163 0.00 0.00 0.00
3 163 49 m² 153 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 50 m 200 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 51 No. 5 0.00 0.00 0.00
3 164 52 No. 5 0.00 0.00 0.00
3 164 53 32mm Tee. No. 5 0.00 0.00 0.00
3 164 54 No. 5 0.00 0.00 0.00
3 164 0.00 0.00 0.00
EXTERNAL WORKS
Inclined stay 2100m long with one end bolted to post and other end with sole plate in and including concrete base
EXTERNAL WORKS
Straining post 2800m high vertically with 1000mm long T welded on and other end with sole plate in and including concrete base
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar in superstructure:
EXTERNAL WORKS
One brick walls.
EXTERNAL WORKS
WATER RETICULATION
EXTERNAL WORKS
Class 10 HDPE pressure pipes:
EXTERNAL WORKS
32mm Pipes laid in and including trenches.
EXTERNAL WORKS
Extra over HDPE pressure pipes for solvent welded pressure fittings:
EXTERNAL WORKS
32mm Adaptor coupling.
EXTERNAL WORKS
32mm Elbow.
EXTERNAL WORKS
EXTERNAL WORKS
32 x 32 x 20mm Reducing tee.
EXTERNAL WORKS
Galvanised steel pipes:
3 164 55 m 12 0.00 0.00 0.00
3 164 0.00 0.00 0.00
3 164 56 No. 16 0.00 0.00 0.00
3 164 Sundries: 0.00 0.00 0.00
3 164 57 No. 9 0.00 0.00 0.00
3 164 58 Item 1 0.00 0.00 0.00
3 165 0.00 0.00 0.00
3 165 59 No. 9 0.00 0.00 0.00
3 165 60 No. 8 0.00 0.00 0.00
3 165 0.00 0.00 0.00
3 165 0.00 0.00 0.00
3 165 61 m 230 0.00 0.00 0.00
EXTERNAL WORKS
20mm Stand Pipes.
EXTERNAL WORKS
Extra over galvanised steel pipes for steel fittings:
EXTERNAL WORKS
20mm Fittings.
EXTERNAL WORKS
EXTERNAL WORKS
300 x 300mm Cast iron stopcock box including brick chamber below not exceeding 450mm deep internally.
EXTERNAL WORKS
Connect to existing water supply including water meter and all necessary fittings.
EXTERNAL WORKS
'Cobra Watertech':
EXTERNAL WORKS
20mm 1001/125RB fullway gate valve.
EXTERNAL WORKS
20mm 107ECCP bibcock with hose union.
EXTERNAL WORKS
ELECTRICAL RETICULATION
EXTERNAL WORKS
600/1000 V PVC/PVC/SWA/PVC copper cable laid in and including trenches and backfilling.
EXTERNAL WORKS
16mm2 2-Core.
3 165 0.00 0.00 0.00
3 165 62 No. 10 0.00 0.00 0.00
3 165 0.00 0.00 0.00
3 165 63 m 30 0.00 0.00 0.00
3 165 64 m 200 0.00 0.00 0.00
3 165 0.00 0.00 0.00
3 165 65 No. 1 0.00 0.00 0.00
3 165 66 No. 9 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
EXTERNAL WORKS
Termination for 600/1000 V PVC/PVC/SWA/PVC copper cables.
EXTERNAL WORKS
16mm2 2-Core.
EXTERNAL WORKS
Bare copper earth conductor installed with cable (cable measured elsewhere).
EXTERNAL WORKS
6mm2 Conductor.
EXTERNAL WORKS
10mm2 Conductor.
EXTERNAL WORKS
Termination for bare and PVC insulated copper conductors including lugs and connections.
EXTERNAL WORKS
6mm2 Conductor.
EXTERNAL WORKS
10mm2 Conductor.
ALTERATIONS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary Preambles which are incorporated in this Bill.
ALTERATIONS
SUPPLEMENTARY PREAMBLES, ETC.
ALTERATIONS
Materials from the alterations, credit, etc:
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
ALTERATIONS
Materials recovered from the alterations (except where described as to be re-used or to be handed over to the client) will become the property of the Contractor, who may allow credit in respect thereof where provided for in the bills of quantities. Such m
ALTERATIONS
Materials described as "removed" shall be removed from the site immediately.
ALTERATIONS
Materials described as "handed over to the client" shall be carefully dismantled where necessary, neatly stored under cover on site where directed and protected from damage, until required.
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
ALTERATIONS
Materials described as "set aside for re-use" shall be carefully dismantled where necessary, neatly stored under cover on protected from damage until required for re-use. Any damage caused to such materials during removal, storage or refixing shall be mad
ALTERATIONS
Making good damaged work, etc:
ALTERATIONS
In taking down and removing existing work the utmost care shall be observed to prevent any structural or other damage to remaining portions of the building, and the Contractor shall provide all shoring, needling, strutting, etc. to ensure the stability of
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 169 0.00 0.00 0.00
4 170 0.00 0.00 0.00
ALTERATIONS
Special care shall be exercised during the progress of the work to ensure that any electrical installations, water supply pipes, telephone and other services which may be encountered are not interfered with and notice shall given to the Architect if any d
ALTERATIONS
The Contractor shall take all precautions necessary to prevent any nuisance from dust whilst carrying out the work.
ALTERATIONS
Contractor shall make good in all trades to existing work where damaged or disturbed through the alterations with all necessary new materails to match the existing.
ALTERATIONS
Disposal of debris, etc:
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
ALTERATIONS
The Contractor shall be responsible for the removal from the site all materials, debris and rubbish resulting from the alterations.
ALTERATIONS
of underground services:
ALTERATIONS
The known services both underground and overhead will be pointed out to the contractor. The Contractor is hereby expected to include in his tendering price the cost of exposing of such services where expedient, be the services known or unknown, as long as
ALTERATIONS
Demolitions, etc:
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
ALTERATIONS
Descriptions of demolitions give a rough guide only as to the scope of the work. Tenderers are therefore advised to visit the site before submitting a tender and to acquaint themselves with the nature and extent of the work to be done and the value of rec
ALTERATIONS
The Contractor shall completely demolish the buildings, etc. in a careful, skillful, practical and safe manner down to 150mm below ground level.
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 0.00 0.00 0.00
4 170 1 Steps. m³ 1 0.00 0.00 0.00
4 171 0.00 0.00 0.00
4 171 2 m³ 1 0.00 0.00 0.00
4 171 3 Columns. m³ 1 0.00 0.00 0.00
4 171 0.00 0.00 0.00
4 171 4 m³ 1 0.00 0.00 0.00
4 171 5 m² 1 0.00 0.00 0.00
4 171 6 m² 1 0.00 0.00 0.00
ALTERATIONS
Description of demolitions shall be deemed to include breaking up and removing:
(1) all floors and surface beds
(2) all external screen and internal walls (clay brick should be set aside, cleaned, for re-use) steps, ramps, aprons, surface water chan
ALTERATIONS
REMOVAL OF EXISTING WORK
ALTERATIONS
Breaking up and removing mass concrete:
ALTERATIONS
ALTERATIONS
Breaking up and removing reinforced concrete including cutting off and removing reinforcement:
ALTERATIONS
Stairs and landings.
ALTERATIONS
ALTERATIONS
Breaking down and removing brickwork etc:
ALTERATIONS
Mass brickwork.
ALTERATIONS
Half brick wall.
ALTERATIONS
One brick wall.
4 171 0.00 0.00 0.00
4 171 7 m 580 0.00 0.00 0.00
4 173 0.00 0.00 0.00
4 173 0.00 0.00 0.00
4 173 0.00 0.00 0.00
4 173 1 m² 90 0.00 0.00 0.00
4 173 FENCING 0.00 0.00 0.00
ALTERATIONS
Taking out/off and removing sundry fencing:
ALTERATIONS
2,100mm High diamond wire mesh and roll it aside and handover to the school.
EXTERNAL WORKS
The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition) and to the Supplementary preambles which are incorporated in this Bill
EXTERNAL WORKS
SITE CLEARANCE, ETC.
EXTERNAL WORKS
Site clearance, etc:
EXTERNAL WORKS
Allow for clearing the area of the site to be built upon of all rubbish, debris, vegetation, hedges, shrubs, trees with trunks not exceeding 200mm girth, including grubbing up all roots, scoffling up as required and cart away all vegetation and debris.
EXTERNAL WORKS
4 173 0.00 0.00 0.00
4 173 2 m 580 0.00 0.00 0.00
4 173 3 m 580 0.00 0.00 0.00
4 173 4 No. 20 0.00 0.00 0.00
EXTERNAL WORKS
Security fencing, gates, etc including two coats bitumious aluminium paint on metal stays, framing, etc:
EXTERNAL WORKS
Security fencing 2,100mm high vertically formed of 50mm diameter standards cast into and including concrete base (base size 450 x 450 x 900mm deep 15 Mpa/19) at average 3,000mm centres, five galvanised straining wires and four galvanised razor wires ' bar
EXTERNAL WORKS
Mass concrete 20Mpa/19mm ground beam 150 x 350mm deep including necessary excavation, formwork, backfilling, etc,.
EXTERNAL WORKS
Horizontal stay 76mm diameter 2000mm long with each end bolted to posts.
4 173 5 No. 20 0.00 0.00 0.00
4 174 6 No. 30 0.00 0.00 0.00
4 174 7 No. 10 0.00 0.00 0.00
EXTERNAL WORKS
Inclined stay 50mm diameter 2500mm long with one end bolted to post and other end welded to 200 x 200 x 5mm sole plate and cast into and including (750 x 400 x 400 mm deep 15Mpa/19) concrete base.
EXTERNAL WORKS
Straining post 100mm diameter 2,100mm high vertically, with 200 x 200 x 5mm sole plate and cast into and including (500 x 500 x 900mm 15Mpa/19) concrete base.
EXTERNAL WORKS
Corner post 100mm diameter 2,100 mm high vertically with 200 x 200x 5 mm sole plate and cast into and including (500 x 500 x 900 mm 15 Mpa/19) concrete base
4 174 8 No. 1 0.00 0.00 0.00
4 174 9 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
Single gate 1,000 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
EXTERNAL WORKS
Single gate 1,500 x 2,100mm high overall, consisting of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbed wires horizon
4 174 10 No. 2 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 11 Trenches m³ 11 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 12 m² 30 0.00 0.00 0.00
4 175 0.00 0.00 0.00
EXTERNAL WORKS
Double gate 5,000 x 2,100mm high in equal leaves, each leave formed of 50mm diameter hollow section perimeter frame and two 35mm diameter hollow section cross bracers rails filled in with three galvanised wires at 500mm centres horizontally and four barbe
EXTERNAL WORKS
THE FOLLOWING IN YARD WALL.
EXTERNAL WORKS
Excavation not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep
EXTERNAL WORKS
Soilcrete filling from selected earthfilling mixed with 5% cement by volume compacted to 95% Mod. AASHTO maximum density and mechanically vibrated:
4 175 13 m³ 1 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 14 m³ 5 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 15 Item 1 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 16 m³ 3 0.00 0.00 0.00
4 175 0.00 0.00 0.00
4 175 17 m² 15 0.00 0.00 0.00
4 175 18 m² 18 0.00 0.00 0.00
4 176 19 m² 3 0.00 0.00 0.00
4 176 0.00 0.00 0.00
EXTERNAL WORKS
In trenches, holes, etc under strip footings.
EXTERNAL WORKS
Selected earth filling supplied by the contractor under floor, etc (material to comply with CBR>40%) in layers and compacted to 98% Mod AASHTO density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc.
EXTERNAL WORKS
Keeping excavations free of water:
EXTERNAL WORKS
Keeping excavations free of all water other than subterranean water
EXTERNAL WORKS
25 MPa/19mm Unreinforced concrete:
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Brickwork of cement bricks (7 MPa nominal compressive strength) in Class I mortar:
EXTERNAL WORKS
One brick walls in foundations.
EXTERNAL WORKS
One brick wall.
EXTERNAL WORKS
Two brick walls batress in foundations.
EXTERNAL WORKS
Brickwork reinforcement:
4 176 20 m 150 0.00 0.00 0.00
4 176 21 m 180 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 22 m² 3 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 23 On walls. m² 66 0.00 0.00 0.00
4 176 24 m² 3 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 25 m² 69 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 0.00 0.00 0.00
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally.
EXTERNAL WORKS
150mm Wide reinforcement built in horizontally in foundations.
EXTERNAL WORKS
Joint forming material in movement joints:
EXTERNAL WORKS
10mm Bitumen impregnated fibre board built in vertically between brick skins.
EXTERNAL WORKS
External cement plaster on brickwalls:
EXTERNAL WORKSEXTERNAL WORKS
On narrow widths.
EXTERNAL WORKS
Remove all loose particles and laitance and apply one coat Plascon Waterbased Plaster Primer and two coats Plascon Pure Acrylic PVA (allow sufficient time for drying between coats).:
EXTERNAL WORKS
On external textured plaster walls.
EXTERNAL WORKS
THE FOLLOWING IN DRINKING FOUNTAIN
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
4 176 26 Trenches. m³ 4 0.00 0.00 0.00
4 176 0.00 0.00 0.00
4 176 27 m² 18 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 28 m³ 2 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 29 m³ 2 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 30 m² 4 0.00 0.00 0.00
EXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Filling with material from the excavations compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Backfilling to trenches, holes, etc
EXTERNAL WORKS
Filling with material supplied by the Contractor compacted to a density of at least 95% Mod. AASHTO maximum density:
EXTERNAL WORKS
Under floors, pavings, etc.
EXTERNAL WORKS
Approved brand of weedkiller mixed with proved brand of anti-termite soil poison and applied in accordance with the manufacturer's instructions:
EXTERNAL WORKS
To bottoms and sides of trenches, etc.
4 177 0.00 0.00 0.00
4 177 31 No. 2 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 32 m³ 2 0.00 0.00 0.00
4 177 33 m³ 1 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 34 m³ 2 0.00 0.00 0.00
4 177 0.00 0.00 0.00
4 177 35 No. 16 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 36 m² 12 0.00 0.00 0.00
4 178 0.00 0.00 0.00
EXTERNAL WORKS
Precast concrete left rough from the mould including bedding, jointing and pointing:
EXTERNAL WORKS
1990mm Diameter concrete ring 465 mm wide x 150mm thick and with 100 x 75mm channel allround including necessary reinforcement.
EXTERNAL WORKS
20Mpa/19mm Concrete
EXTERNAL WORKS
Strip footings.
EXTERNAL WORKS
Pavings cast in panels.
EXTERNAL WORKS
25 MPa/19mm Concrete:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc.
EXTERNAL WORKS
100mm Diameter fibre cement pipe filled solid with 25 MPa/19mm Concrete:
EXTERNAL WORKS
Column 1340mm long.
EXTERNAL WORKS
Finishing top surfaces of concrete smooth with a wood float:
EXTERNAL WORKS
Paving to falls.
EXTERNAL WORKS
Smooth Formwork to Sides:
4 178 37 m 24 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 38 m² 4 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 39 m² 2 0.00 0.00 0.00
4 178 40 m² 3 0.00 0.00 0.00
4 178 41 m² 5 0.00 0.00 0.00
4 178 0.00 0.00 0.00
EXTERNAL WORKS
Edges, risers, ends and reveals not exceeding 300mm high or wide circular exceeding 1m radius.
EXTERNAL WORKS
Permanent formwork to Soffits left in place:
EXTERNAL WORKS
Vanity slabs, cupboard slabs, cover slabs, etc. propped up not exceeding 1,5m high.
EXTERNAL WORKS
Brickwork of concrete bricks in Class I mortar:
EXTERNAL WORKS
One brick wall circular on plan.
EXTERNAL WORKS
365mm Hollow walls of two half brick skins and cavity filled solid with hardcore filling no wire ties circular on plan in foundations.
EXTERNAL WORKS
Hollow walls of two half brick grilled skins and cavity filled with charcoal no wire ties circular on plan.
EXTERNAL WORKS
Metalwork Sundries:
4 178 42 No. 16 0.00 0.00 0.00
4 178 Wire Mesh 0.00 0.00 0.00
4 178 43 m² 13 0.00 0.00 0.00
4 178 0.00 0.00 0.00
4 178 44 On walls. m² 7 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 45 No. 2 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 46 No. 2 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 47 No. 16 0.00 0.00 0.00
4 179 0.00 0.00 0.00
EXTERNAL WORKS
1.5 x 19mm Flat metal ring 130mm diameter soldered to underside of water tray (water tray elsewhere measured.
EXTERNAL WORKS
EXTERNAL WORKS
Galvanised wire mesh with 6 x 6mm screen opening.
EXTERNAL WORKS
Cement plaster on brickwork:
EXTERNAL WORKSEXTERNAL WORKS
Galvanised sheet iron:
EXTERNAL WORKS
1.2mm Thick 1550mm Diameter tray 150mm deep including 2mm diameter holes drilled at 150mm centres in base.
EXTERNAL WORKS
Cobra Watertech' crutch handle and lockshield stopcocks:
EXTERNAL WORKS
15mm Rough brass F x F stoptap (code 121-15).
EXTERNAL WORKS
'Cobra Watertech' 'Demand' 'Mastermatic, etc. bibtaps:
EXTERNAL WORKS
15mm Rough brass 'Demand' bibtap (code KM2.203-15).
EXTERNAL WORKS
Class O copper pipes:
4 179 48 m 12 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 49 No. 50 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 50 No. 2 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 51 Holes. m³ 7 0.00 0.00 0.00
4 179 0.00 0.00 0.00
4 179 52 Soft rock. m³ 1 0.00 0.00 0.00
4 179 53 Hard rock. m³ 1 0.00 0.00 0.00
4 180 0.00 0.00 0.00
4 180 54 m² 11 0.00 0.00 0.00
4 180 0.00 0.00 0.00
EXTERNAL WORKS
15mm Pipes.
EXTERNAL WORKS
Extra over class O copper pipes for capillary fittings:
EXTERNAL WORKS
15mm Fittings.
EXTERNAL WORKS
"Namibian Roto Mould" Plastic water tank:
EXTERNAL WORKS
1000l Water tank.
EXTERNAL WORKS
THE FOLLOWING IN WATER TANK AND STAND
EXTERNAL WORKS
Excavation in earth not exceeding 2m deep:
EXTERNAL WORKS
EXTERNAL WORKS
Extra over excavations other than bulk in earth for excavation in:
EXTERNAL WORKSEXTERNAL WORKS
EXTERNAL WORKS
Risk of collapse of excavations other than bulk:
EXTERNAL WORKS
Sides of trench and hole excavations not exceeding 1,5m deep.
EXTERNAL WORKS
Extra over all excavations for loading, carting and dumping surplus excavated material (no allowance made for increase in bulk):
4 180 55 m³ 7 0.00 0.00 0.00
4 180 0.00 0.00 0.00
4 180 56 m² 15 0.00 0.00 0.00
4 180 0.00 0.00 0.00
4 180 57 m² 15 0.00 0.00 0.00
4 180 0.00 0.00 0.00
4 180 58 m³ 1 0.00 0.00 0.00
EXTERNAL WORKS
Off site to a dumping site to be found by the Contractor.
EXTERNAL WORKS
Surface Preparation:
EXTERNAL WORKS
Trim and level off surface of ground (excavated or filled under this Contract) to receive concrete surface beds, including excavating or filling, ripping and scarifying as necessary and compacting the whole area for a depth of 150mm to a density of at lea
EXTERNAL WORKS
Approved brand of weedkiller mixed with an approved brand of termite poison and applied in accordance with the manufacturer's instructions:
EXTERNAL WORKS
To bottom of trenches, etc.
EXTERNAL WORKS
15Mpa/19mm Unreinforced Concrete:
EXTERNAL WORKS
Surface blinding under footings and bases.
4 180 0.00 0.00 0.00
4 180 59 Bases. m³ 7 0.00 0.00 0.00
4 180 60 m3 0.24 0.00 0.00 0.00
4 180 0.00 0.00 0.00
4 180 61 m² 11 0.00 0.00 0.00
4 181 62 m² 3 0.00 0.00 0.00
4 181 0.00 0.00 0.00
4 181 63 Tonnes 0.12 0.00 0.00 0.00
4 181 64 Tonnes 0.12 0.00 0.00 0.00
4 181 65 Tonnes 0.23 0.00 0.00 0.00
4 181 0.00 0.00 0.00
4 181 66 Tonnes 0.23 0.00 0.00 0.00
4 181 67 Tonnes 0.46 0.00 0.00 0.00
EXTERNAL WORKS
35 MPa/19mm Reinforced Concrete:
EXTERNAL WORKSEXTERNAL WORKS
Stub columns.
EXTERNAL WORKS
Rough Formwork to Sides:
EXTERNAL WORKS
Bases (Provisional).
EXTERNAL WORKS
Rectangular columns.
EXTERNAL WORKS
Mild steel reinforcement to structural concrete work:
EXTERNAL WORKS
8mm Diameter bars.
EXTERNAL WORKS
10mm Diameter bars.
EXTERNAL WORKS
12mm Diameter bars.
EXTERNAL WORKS
High tensile steel reinforcement to structural concrete work:
EXTERNAL WORKS
10mm Diameter bars.
EXTERNAL WORKS
12mm Diameter bars.
4 181 0.00 0.00 0.00
4 181 0.00 0.00 0.00
4 181 68 Tonnes 1.22 0.00 0.00 0.00
4 182 69 Tonnes 0.3 0.00 0.00 0.00
4 182 0.00 0.00 0.00
4 182 70 Tonnes 0.74 0.00 0.00 0.00
EXTERNAL WORKS
The following in structural steel work must comply with the requirements of SABS 1200-Section H. Grade 300W to be used for all sections. Bolts to be grade 40.
Workshop drawings have to be submitted to the Engineer for approval before manufacturing comm
EXTERNAL WORKS
Welded columns in single lengths with flat section base, top, bearer and connection plates bolted to concrete:
EXTERNAL WORKS
406 x 140mm x 46kg/m I-section columns
EXTERNAL WORKS
70 x 70 x 6mm x 6.38kg/m angle section columns.
EXTERNAL WORKS
Welded beams in single lengths with flat section bearer and connection plates bolted to steel columns:
EXTERNAL WORKS
203 x 133mm x 25.3kg/m IPE-section beams.
4 182 71 Tonnes 0.67 0.00 0.00 0.00
4 182 0.00 0.00 0.00
4 182 72 Tonnes 0.05 0.00 0.00 0.00
4 182 73 No. 12 0.00 0.00 0.00
4 182 0.00 0.00 0.00
4 182 74 Tonnes 0.24 0.00 0.00 0.00
4 182 75 Tonnes 0.31 0.00 0.00 0.00
4 182 76 Kg 5 0.00 0.00 0.00
4 182 77 Kg 68 0.00 0.00 0.00
4 182 78 Kg 84 0.00 0.00 0.00
4 182 79 m 9 0.00 0.00 0.00
4 182 80 No. 2 0.00 0.00 0.00
EXTERNAL WORKS
120 x 55 x 13mm x 13.4kg/m channel section sleepers.
EXTERNAL WORKS
Bolts to columns, beams, etc:
EXTERNAL WORKS
High tensile bolts.
EXTERNAL WORKS
16mm Diameter U-shaped anchor bolt 1150mm girth.
EXTERNAL WORKS
Welded bracing etc with flat section connection plates bolted to steel:
EXTERNAL WORKS
Angle section bracing.
EXTERNAL WORKS
40 x 6mm x 1.88kg/m flat section cross bracers.
EXTERNAL WORKS
12mm Diameter mild steel ladder rungs with both ends welded to stringers.
EXTERNAL WORKS
Angle-section edge to platform and tank fixing brackets.
EXTERNAL WORKS
20mm Diameter mild steel braces welded to gussets.
EXTERNAL WORKS
51mm Diameter x 3 mm thick mild steel cat ladder stringers.
EXTERNAL WORKS
Extra on last for closed end.
4 183 81 m 17 0.00 0.00 0.00
4 183 82 m 13 0.00 0.00 0.00
4 183 83 m 0.25 0.00 0.00 0.00
4 183 84 No. 1 0.00 0.00 0.00
4 183 85 No. 4 0.00 0.00 0.00
4 183 86 No. 1 0.00 0.00 0.00
EXTERNAL WORKS
50 x 50 x 2,5mm Hollow-section steel beam with ends welded to columns.
EXTERNAL WORKS
100 x 75 x 20 x 2,5mm Lipped channel-section track for level indicator welded to bracket.
EXTERNAL WORKS
100 x 50 x 25 x 3mm Top hat section track for level indicator welded to bracket.
EXTERNAL WORKS
4mm Diameter stainless steel wire rope approximately 4,000mm long.
EXTERNAL WORKS
10mm Diameter Ramset or other approved chemical bolt including hole in concrete or brickwork.
EXTERNAL WORKS
Approved steel chain approximately 200mm long bolted at both ends to channel with and including 6mm bolts.
4 183 87 No. 2 0.00 0.00 0.00
4 183 88 No. 1 0.00 0.00 0.00
4 183 89 No. 1 0.00 0.00 0.00
4 183 90 No. 4 0.00 0.00 0.00
4 183 91 No. 12 0.00 0.00 0.00
4 183 92 m 14 0.00 0.00 0.00
4 184 93 No. 2 0.00 0.00 0.00
EXTERNAL WORKS
50mm Diameter Approved Teflon pulley fixed to channel with and including 6mm diameter black bolt.
EXTERNAL WORKS
75 x 40 x 4,5mm Channel-section level indicator 350mm long.
EXTERNAL WORKS
100mm Diameter approved brass spherical float fixed to steel rope.
EXTERNAL WORKS
60 x 60 x 3mm Hollow-section steel column approximately 3,475 m long including welding top to steel beam and bottom to base plate.
EXTERNAL WORKS
80 x 4,5mm Mentis type RS80 horizontal galvanised grid in 3m long x 750mm wide sheets.
EXTERNAL WORKS
Mentis ball type hollow-section horizontal handrail through stanchions.
EXTERNAL WORKS
Extra on last for Item 2M 90º straight closure bend.
4 184 94 No. 24 0.00 0.00 0.00
4 184 95 No. 1 0.00 0.00 0.00
4 184 0.00 0.00 0.00
4 184 96 m 22 0.00 0.00 0.00
4 184 97 No. 8 0.00 0.00 0.00
EXTERNAL WORKS
Mentis Ball type MT90 or other approved 34,13mm diameter handrail stanchion approximately 1m high.
EXTERNAL WORKS
150 x 150 x 5mm Thick stainless steel flat-section four times holed for and including 10mm stainless steel bolts with heads, nuts and washers fixed through top of rainwater tank.
EXTERNAL WORKS
Wecrolok type PT 90 welded and bolted patent balustrading to steel tower summit:
EXTERNAL WORKS
Horizontal balustrading 900mm high of continuous pipe top, middle and bottom rails and approved stanchions at average 800mm centres bolted to steel beam with approved bolts.
EXTERNAL WORKS
Extra over 900mm high balustrading for curved L-intersection of horizontal balustrading.
4 184 98 No. 2 0.00 0.00 0.00
4 184 0.00 0.00 0.00
4 184 99 No. 1 0.00 0.00 0.00
4 184 0.00 0.00 0.00
4 184 100 m² 53 0.00 0.00 0.00
4 185 101 m 30 0.00 0.00 0.00
EXTERNAL WORKS
900mm high balustrade for straight end closure piece.
EXTERNAL WORKS
Rain Water Tanks:
EXTERNAL WORKS
10,000 Litre approved polyethylene water container as manufactured by Namibia Roto Mould (Pty) complete with overflow pipe, installed on stand approximately 7,000mm above ground level.
EXTERNAL WORKS
Prepare surfaces and remove all loose material, dust, grease, salts and contamination with 'Plascon Aquasolve Degreaser GR1', rinse and apply one coat 'Plascon Galvogrip Metal Primer', apply one coat 'Plascon Merit Universal Undercoat' and two coats 'Pla
EXTERNAL WORKS
On rails, bars, pipes, etc.
EXTERNAL WORKS
On rails, bars, pipes, etc not exceeding 300 mm girth.
5 189 0.00 0.00 0.00
5 189 0.00 0.00 0.00
5 189 1 Item 1 0.00 0.00 0.00
5 189 2 Item 1 0.00 0.00 0.00
5 189 3 Item 1 0.00 0.00 0.00
5 189 0.00 0.00 0.00
5 189 0.00 0.00 0.00
5 189 4 Item 1 0.00 0.00 0.00
5 189 5 Item 1 0.00 0.00 0.00
5 189 6 Item 1 0.00 0.00 0.00
PROVISIONAL SUMS
JOINERY FITTINGS
PROVISIONAL SUMS
Joinery fittings:
PROVISIONAL SUMS
Provide the amount of N$ 80 000. 00 (Eighty Thousand Namibian Dollars) for the replacement of all damaged Joinery Fittings and supply and delivery of new Durashake cupboards.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.
PROVISIONAL SUMS
WATER SUPPLY INSTALLATION
PROVISIONAL SUMS
Water supply installation:
PROVISIONAL SUMS
Provide the amount of N$ 250,000.00 (Two Hundred and Fifty Thousand Namibian Dollars) for Water Supply Installation to Groot Aub.
PROVISIONAL SUMS
Profit on above item.
PROVISIONAL SUMS
Attendance on ditto.