section f :schedule of quantities interior...

SR NO DESCRIPTION QTY UNITFRAME WORKProviding and fixing in position Aluminium Frame Work for partitions,paneling, boxing, soffits etc. with vertical & horizontal members at notmore than 600 mm center to center. All complete including necessaryadditional supports, bracing, runner etc so that lateral movement isarrested. as per instructions of Project - In - Charge. Frame work will bemeasured and paid as per actual measurement on site. Rates quotedshall include the cost of providing and fixing supports up to floor ceiling,Angle Support to ceiling. All complete as per detail drawing, as specifiedand as directed by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured)

1 SIZE 50 x 50 x 1.62MM 430 SQM2 SIZE 50 x 25 x 1.62 MM 371 SQM

SKINNING / PANELING / BOXING3 9 MM THK MARINE PLYWOOD 1240 SQM

Providing and fixing 9 mm thick Approved Marine Grade Plywood ofapproved quality & make for partitions, facias, skirtings, wall paneling &soffit etc as per required width and size or as per drawing. Including costof making openings for switches, AC facias with the help of adhesiveslike fevicol etc, nails / screws etc. The rates quoted shall includeproviding openings for wiring and necessary screws etc. All complete asper detail drawing, as specified and as directed by Architect / Consultant/ Project - In - Charge. (Actual executed area will be measured)

4 12 MM THK MARINE PLYWOOD 25 SQMProviding and fixing in position 12 mm thick Approved Marine GradePlywood of approved quality & make for partitions, facias, skirtings, wallpaneling & soffit etc as per required width and size or as per drawing.Including cost of making openings for switches, AC facias with the helpof adhesives like fevicol etc, nails/ screws etc and providing openings forwiring and necessary screws etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured)

5 19 MM THK MARINE PLYWOOD 50 SQMProviding and fixing in position 19 mm thk Approved Marine Grade Plywood of approved quality & make for partitions, facias, skirtings, wallpaneling & soffit etc as per required width and size or as per drawing.Including cost of making openings for switches, AC facias with the helpof adhesives like fevicol etc, nails / screws etc. and providing openingsfor wiring and necessary screws etc. All complete as per detail drawing,as specified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured)

6 9 MM THICK GYPSUM BOARD ON WALL / PARTITION 175 SQMProviding and fixing Gypsum Board (9 mm thick) to wall/ partition in lineand level. Rate to include cost of filling joints with joint tapes &jointing powder) (Actual executed area will be measured). NOTE FOR FINISHES IN PARTITION, PANELING, ETC

SECTION F :SCHEDULE OF QUANTITIESINTERIOR WORK OF DRDC, AT HYDERABAD FOR H.P.C.L

TENDER : 8000038-HB-10002 (e-TENDER : 5445)

PAGE 1 OF 31

SR NO DESCRIPTION QTY UNIT



Note :- Actual executed area will be measured as two sides of samepartition are likely to have different finishes. Rate of this item shallinclude cost of providing fixing wooden facia, if any, cross matchingveneer in approved pattern skirting, etc. as per details and finished inmelamine polish for which no extra payment shall be made but shallmeasured along with the respective item. The finishing material shall befixed in required divisions/panels/ pattern with proper grooves etc. asper drawings & directions. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured). It may be noted thatfor cross grains/pattern etc no additional wasatge area will be givenin mesurements and quoted rate of the contractor shall include allthe above in their rates.

7 VENEER FINISH (BASIC RATE RS 1614 /- PER SQM) 580 SQMProviding and fixing 4 mm thick group matching Approved Decorativeburl Veneer ( basic rate Rs 1614 per smt)of approved quality and make,of required size and width as per site condition including 3 coat ofmelamine polish on the veneer surface. Additional coat if required forfinish surface to be provide free of cost . The cost shall be includingsurface preparation pasting with approved adhesive and finishing itevenly to get flat surface. The cost of openings for switches, AC facia,any other cutout etc. shall be included in the rates quoted. All completeas per detail drawing, as specified and as directed by Architect /Consultant / Project - In - Charge. (Actual executed area will bemeasured)

8 VENEER FINISH (BASIC RATE OF VENEER RS 753 /- PER SQM) 720 SQMProviding and fixing 4 mm thick group matching Approved Decorativenatural Veneer ( with basic rate Rs 753 per sqft)of approved quality andmake, of required size and width as per site condition with 3 coat ofmelamine polish. Additional coat if required for finish to be provide freeof cost the cost to include surface preparation pasting with approvedadhesive and finishing it evenly to get flat surface. The cost of openingsfor switches, AC facia, any other cutout etc. shall be included in the ratesquoted. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Actual executed areawill be measured)

9 LAMINATE FINISH (BASIC RATE OF LAMINATE RS 35 /- PER Sqft) 115 SQM

Providing and fixing 1.0 mm thick Approved Laminate of approvedquality, make & colour of required size and width as per site condition inapproved pattern including surface preparation, pasting of laminate withapproved adhesive & finishing it evenly to make a flat surface withoutbubble etc. complete. The rates shall include the cost of cut outs in thesurface as required. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured)

10 FULLY GLAZED PARTITION 20 SQM

PAGE 2 OF 31




Providing and fixing in position 12 mm thk Toughened Clear Glass inpartition panels by using various glass fittings of approved make(DORMA / HAFELE) to be fixed with necessary fittings on the ceilingduly finished without giving any load on the false ceiling by usingnecessary hardware of Dorma / Hafele make what ever necessary andrequired numbers to complete the job in all respect. Rate including costof door opening with approval hardware such as patch fitting lock,handle etc of approved make but without cost of floor spring. Contractoris advised to submit working drawing with details of approved makepatch fitting, sizes of glass panels etc and take approvals of consultantsbefore execution of works. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured)

11 INSULATED GLASS PARTITION 20 SQMSame as item no 4 (a) above but with doubly glazed insulatedpartition fixed and sealed to wooden partition frame to which the glazedunits are bonded with means of mono compound of Dow Corning silicon.The double glazing shall be made out of an external toughned 6mm thkglass and internal toughned 5 mm glass with a clear 12mm vaccumchember in between the extenal and internal glasses. Item to becompleted in all respects as per drawings & instructions from Project - in - charge. Minor Design change is expected where as no extra will bepayble Note: Recommended Manufacturer: Sejal Glass/tough glaze/approvedequivalant with prior approval of EIC.

FULL HEIGHT STORAGEProviding and Fixing in position 675 mm Wide Full Height Storagecomprising of 19 mm thick approved marine ply, 6 mm thick approvedmarine ply for back, 19 mm thick approved marine ply for shutter, 4 mmthick approved Veneer to all external surfaces, 1 mm thick approvedlaminate to internal surfaces of shutter including necessary hardware,approved fittings & fixtures like approved SS hinges, SS approvedhandle, approved locks (Vijayan, Godrej or equivalent make), approvedadhesive, melamine polish to all exposed surfaces etc. All complete asper detail drawing, as specified and as directed by Architect / Consultant/ Project - In - Charge. (Actual executed area will be measured)

Detailed specification as followsi) Verticals - 19 MM thk marine ply finished with French polish for allinside surfaces.ii) Skirting ledge and soffit ledge - 19 mm plywood with necessarywooden beadings etc.iii) Shutters - Made out of 19 mm plywood along with 19 mm stiffiningply all arond the shutter for atleast a width of 100 mm and finished withthe following finish & 1mm thk laminate of approved shade, make,texture & quality on inner side.Site modification as per requirement hasto be undertaken with out any extra cost.The shutters to be provided withlocks. The veneer area will be duly melamine polished. Inner side of theshutters to be provided with 1mm thk laminate and 6mm thk lippings tobe provided on all exposed ply surfaces and be finished with melaminepolish on all the exposed edges.

PAGE 3 OF 31




iv) Hardware - All necessary hardware such as SS hingeshinges, SS tower bolts, Magnetic catches etc. Hardware shall beheavy duty brass oxidized type, brass body lock (Godrej orequivalent make with extra large group key).All exposed woodwork to be Melamine polished, all internalsurfaces to be finished with French polish complete as per drawing anddirections. The external surface to be finished with the following finishesas providing in the respective high storage items. The exposed surface shall be finished as mentioned below -

12 Finished with basic Rate of Laminate Rs 376 /- per Sqm 7 SQM13 Finished with a basic Rate of Veneer Rs 753 /- per Sqm 10 SQM14 450 MM WIDE CONSOLE 20 SQM

Providing and Fixing in position 450 mm Wide Console (Low HeightStorage) comprising of 19 mm thick approved marine ply top, 6 mm thickapproved marine ply for back, 19 mm thick approved marine ply forshutter with 6 mm thick frosted glass, 19 mm thick approved marine plyfor drawers, 75 mm thick marine ply band for table top with Veneer &polycoating finish, Shutter and Drawer Finished with 4 mm thickapproved Veneer to all external surfaces, 1 mm thick approved laminateto internal surfaces. 8 mm thick approved clear glass on Table topincluding necessary hardware, approved fittings & fixtures like approvedSS hinges, approved handle, approved locks (Vijayan, Godrej orequivalent make), approved adhesive, all drawer use Hettich/approvedequivalant drawer channels , melamine polish to all exposed surfacesetc. All complete as per detail drawing, as specified and as directed byArchitect / Consultant / Project - In - Charge. (Actual executed area willbe measured)

15 SERVING COUNTER STORAGE UNIT WITH GRANITE TOP 5 SQMProviding and Fixing in position Serving Counter Storage Unitcomprising of 19 mm thick approved marine ply, 6 mm thick approvedmarine ply for back, 19 mm thick approved marine ply for shutter. Shutterfinished with 4 mm thick approved Veneer to all external surfaces, 1 mmthick approved laminate to all internal surfaces. The Serving Topfinished in 19 mm thick approved granite including edge polishing,moulding, Cost of approved adhesive for fixing on plywood top,necessary hardware, approved fittings & fixtures like approved S.Shinges, approved handle, approved locks (Vijayan, Godrej or equivalentmake), approved adhesive, melamine polish to all exposed surfaces etc.All complete as per detail drawing, as specified and as directed byArchitect / Consultant / Project - In - Charge. (Actual executed area willbe measured) Basic Rate of Granite Rs 1614 /- per Sqm Basic Rate ofVeneer Rs 753 /- per Sqm Basic Rate of Laminate Rs 376 /- per Sqm

16 LOW HEIGHT STORAGE UNIT 6 SQM

PAGE 4 OF 31




Providing and Fixing in position Low Height Storage Unit of width 500mm comprising of 19 mm thick approved marine ply, 6 mm thickapproved marine ply for back, 19 mm thick approved marine ply forshutter with frosted glass as per design, 19 mm thick approved marineply for drawers, 75mm thick marine ply band for table top with Veneer &polycoating finish, Shutter and Drawer Finished with 4 mm thickapproved Veneer with polycoating to all external surfaces, 1 mm thickapproved laminate to internal surfaces. 8 mm thick approved clear glasson Table top, including necessary hardware, approved fittings & fixtureslike SS hinges, approved handle, approved locks (Vijayan, Godrej orequivalent make), approved adhesive, all drawer shall be of Hettich orapproved equivalant make, melamine polish to all exposed surfaces ifrequired etc. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured).Basic Rate of Veneer Rs 753 /- perSqm .Basic Rate of Laminate Rs 376 /- per Sqm

17 TRAP DOOR IN LAMINATE FINISH (BASIC COST OF LAMINATE RS376 /- PER SQM)

9 SQM

Providing trap door in 19 mm ply wood finished with 1 mm thk laminateon both sides. The item to include ss hinges,handles if any as perdesign. The item also include providing necessary support structure fromthe ceiling for fixing the trap door shutters.DOOR- Note: All hardware except that of hinges, floor spring/door closureand handle shall be included in the quoted rates for door. Theabove harware will be paid seperatly under different item specifiedin SOQ

18 FULLY GLAZED DOOR ON PATCH FITTINGS 6 SQMProviding and fixing in position 10mm thk Toughened Clear Glass doorby using various glass patch fittings of M/S DORMA to be fixed withnecessary fittings on the ceiling duly finished without giving any load onthe false ceiling by using necessary hardware of Dorma make what evernecessary and required numbers to complete the job in all respect. Rateincluding cost of door opening with approval hardware such as patchfitting lock, handle etc of approved make floor spring. Contractor isadvised to submit working drawing with details of approved make patchfitting, sizes of glass panels etc and take approvals of consultants beforeexecution of works. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured)

19 PARTLY GLAZED PARTLY SOLID DOOR (BOTH SIDE VENEER) 15 SQMProviding & fixing 40mm thk Partly glazed Partly Solid Door with veneeron both sides with melamine polish as per design pattern shown indrawing. All edges should finish with matching wood lipping withmelamine polish. (Rate including 10mm thk Acid etched glass designedopening with wooden beadings finished with melamine polish whereverinstructed) Rate including cost of necessary hardware, approvedadhesive. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured) .Basic Rate of Veneer Rs 753 /- perSqm

20 FLUSH DOOR (ONE SIDE VENEER AND ONE SIDE LAMINATE) 7 SQM

PAGE 5 OF 31




Providing & fixing 40mm thk Flush door finish with veneer & melaminepolish on one sides and 1.0 mm thk laminate on other side as per designpattern shown in drawing. All edges should finish with matching woodlipping with melamine polish. Rate including cost of necessary hardware,approved adhesive. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured) Basic Rate of Veneer Rs 753 /- perSqm.Basic Rate of Laminate Rs 376 /- per Sqm

21 PARTLY GLAZED PARTLY SOLID DOOR WITH SANDWITCHEDGLASS (BOTH SIDE VENEER)

15 SQM

Providing & fixing 40mm thk Partly glazed Partly Solid Door withSandwitched glass. Door Shutters veneer on both sides with melaminepolish as per design pattern shown in drawing. All edges should finishwith matching wood lipping with melamine polish. (Rate including 6mm+12 mm air gap + 5 mm thk clear glass/ etched glass sandwitchedpartition designed opening with wooden beadings finished withmelamine polish wherever instructed) Rate including cost of necessaryhardware, approved adhesive. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured) Basic Rate of VeneerRs 753 /- per Sqm

22 FLUSH DOOR (BOTH SIDE VENEER) 4 SQMProviding & fixing 40mm thk Flush Solid Door finished with veneer onboth sides with melamine polish as per design pattern shown in drawing.All edges should finish with matching wood lipping with melamine polish.Rate including cost of necessary hardware, approved adhesive. Allcomplete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge. (Actual executed area will bemeasured).Basic Rate of Veneer Rs 753 /- per Sqm

23 DOOR FRAME 70 RmtProviding and fixing T.W. Door frame of finished size 75 mm x 50 mmapplicable as per profile Shown in the drawing and finished withapproved Veneer and melamine polish and holdfasts/screws as perdetails. Measurement of the frame will be taken along the center line offrame. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Actual executed areawill be measured) Basic Rate of Veneer Rs 753 /- per Sqm

Note :- Measurement of frame shall taken along the center line of frame.

24 Item same as above but for brick Walls of Finished Size - 125 mm x 50mm with hold fasts of approved size.

16 RMT

25 SOFT BOARD 11 SQM

PAGE 6 OF 31




Providing and fixing Soft Board panel of specified sizes having 12 mmthick soft board covered with felt fabric of approved make and shade ofpremium quality and cost of fabric not less than Rs. 250 /- per RM. Theboard shall have teakwood / cedar / beech / matching wooden beading,lipping al l- round. The board shall be fixed on prepared surface withnecessary hardware fittings etc. complete. All concealed wood worksshall have sealer polish as directed. Rate quoted shall be for thecomplete finished work including all the materials and labour mentionedabove. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Actual executed areawill be measured) Basic Rate of Fabric Rs 250 /- per Rmt

26 WHITE BOARD 17 SQMProviding and fixing white matt finish" white mark/approved equivalent"writing board with enameled sheet steel front, GI back over approvedinner core, of specified size black or chocolate colour anodizedaluminum beading to form the screen including the necessaryaccessories such as magnetic symbols, magnetic letters, magneticstrips, magnetic eraser, magnetic dry marker 4 Nos., spare felt foreraser, board fixing clips etc. and the board shall be made out ofenamelled sheet with backing of AC sheet to suitable thickness etc.complete and all as per manufacturer's specification and as directed bythe EIC / Architect. Rate shall inclusive of making and fixing woodenledge for full length of the board for keeping marker pen, eraser etc.Rate quoted shall be for the complete finished work including ledgeboard to keep accessories, and all materials and labour mentionedabove. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Actual executed areawill be measured)

27 T.W MOULDING-15 mm x 15 mm 30 RmtProviding and fixing in position mouldings out of T.W Moulding of size 15mm x 15 mm size complete as per profile given in the detail drawing oras explained out of wooden sections of sizes given below. All should befinished with melamine polish of approved shade & colour with minimum3 coats. This item will operate only for those mouldings which are to befixed independent of any other item as mentioned in the Bill of Quantitiesand not measured under any other item etc. All complete as per detaildrawing, as specified and as directed by Architect / Consultant / Project -In - Charge. (Actual executed area will be measured)

28 Same as above but of Size 75 X 25 MM 85 RMT29 Same as above but of Size 25 X 50 MM 100 RMT30 Same as above but of Size 50 X 50 MM 125 RMT31 Same as above but of Size 100 X 40 MM 50 RMT32 SILHOUETTE BLINDS 65 SQM

Providing and fixing Luxaflex/approved equivalent make SilhouetteShades Blinds of approved shade as per the following specification:

PAGE 7 OF 31




The blind shall be one part blind, one part drapery and shall be made ofsoft sheer fabric front and back facings, bonded to translucent fabricvanes.Silhouette shade shall be operated using a continuous cord loopand with the shade lowered, the vanes could be tilted to any positionfrom fully open to closed. With the vanes open, the sheer fabric facingsshall soften the outside view and filter the incoming sunlight. With theshading raised, the fabric shall be concealed into the headrail.Allcomponents are to be colour co-ordinate and the specification is asfollows.Headrail : Channel shall measure 81mm wide and 61mm deep with anormal wall thickness of 1.0 – 1.2mm & extruded from 6063 aluminumalloy with powder coated finish.Cord Tendioner / Cartridge Assembly.The assembly consists of the following components :Cord Tensioner : Cord Tensioner Body, Cord Tensioner Cover, CordTensioner Spring, Cord Tensioner Cradle, Cord Tensioner Spool, LoopCord.Cartridge Assembly : Cartridge, Cord Wheel Shaft, Cord Wheel, CordWheel Cover, Clutch / Limit Assembly Set.Clutch / Limit Assy : Made from high engineering grade plastics andconsist of the cord pulley and the limit adjustment and levelling screw.

Any assembly consist of the following :Clutch Side : Right or left Specific Headrail End Cap Cord Pulley,Screw, Torsion, Spring, Spring Release.Limit Side : Right or Left Specific Headrail End Cap, Right or LeftSpecific Back Plastic Screw, Right or Left Specific Limit Nut, LimitAdjustment Screw, Spring, Screw Limit Bracker, Rotator, Right or LeftSpecific Fabric Sensor, Leveling Screw.

33 VENETIAN BLINDS 30 SQMProviding and fixing Luxafelx / approved equivalent makevertical/Venetian blinds of approved shade. The blinds to be fixed andcommissioned as per manufactures specification. All complete as perdetail drawing, as specified and as directed by Architect / Consultant /Project - In - Charge. (Actual executed area will be measured) BasicRate of Vertical/Venetian Blinds Rs 160 per sqft

34 CABLE MANAGER 30 NOProviding & fixing in position MS powder - Coated Cable Managers ofdia. 75mm for table tops/side unit wherever directed. The item includescutting necessary holes on glass/side unit/table etc for fixing the cablemanager. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge.

35 SOFFIT VENEER FINISHED 195 SQMProviding and fixing in position 19 mm thk plywood for Soffit finishedapproved veneer with melamine polish including 25 x 25 mm thk T.W.wooden frame work / supports & mouldings, grooves finished withmelamine polish. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge. (Actualexecuted area will be measured). Basic rate of veneer Rs 70 per sqft

36 JAMB LINING (AVG WIDTH 250 MM) 76 RMT

PAGE 8 OF 31




Providing and fixing in position 250 mm Jamb Lining in 19 mm thkmarine plywood and finished approved veneer with melamine polish towooden moulding and exposed edges finish with melamine polish. Allcomplete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge. (Actual executed area will bemeasured) .VENEER FINISHED (BASIC COST OF VENEER RS 1614/- PER SQM)

37 100 MM HIGH WOODEN SKIRTING 50 RMTProviding and fixing in position 1st quality matching Wooden Skirting of100 mm x 15 mm size including 3 coats of melamine polish of approvedshade. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Actual executed areawill be measured)

38 DUST BIN 12 NOProviding and arranging in position dust bins out of perforated S.SSheets (min Size 200 mm dia x 400 mm Height). All complete as perdetail drawing, as specified and as directed by Architect / Consultant /Project - In - Charge.

39 SPARKLE FROST FILM 20 SQMProviding and Fixing in position approved equivalent make Frosted filmon glass patition/glass on doors etc . The item to be completed as perdetail drawing, as specified and as directed by Architect / Consultant /Project - In - Charge. (make 3M or approved equivalent) (Basic Cost Rs1398/- Per Sqm)

40 PHENOTHERM INSULATION (50 MM THICK) 592 SQMProviding and Fixing in position 50 mm thk Phenotherm insulation(KP/AL) with in partitions/doors wherever as shown and as per the sitedirections. The rate shall include covering of aluminum foils as permanufacturers’ specifications.

41 Glass block Partitions- Providing & fixing in position glass block Size 180mm * 180 mm/approved size partition with 'SOLARIS' - Germany or approvedequivalent make glass block of approved sizes given with approveddesign & colour, joints to be in matching cement mortar. Rate to includeall glass blocks, joints, plastic spacers if required, etc. complete as perinstructions, design & details.

10 SQM

42 WALL PAPER 125 SQMProviding and fixing Decorative Wall Paper on to partition / ply finish /wall etc with approved adhesive as approved over paneling in anyshape, length etc.Including preparing surface for Wall paper. (Rate toinclude wastage due to shape). (Basic Cost Rs 1614/- Per Sqm)

43 WOODEN FLOORING 500 SQMProviding and fixing 18 mm thk Real Solid Wood Natural Flooring/Laminated flooring (AC-5) of plank size 200 mm x 1200 mm /approvedsize with 2 mm Foam of as per approved manufacturers specification.dock ltounge & groove joint and providing and fixing skirting boardbeading to match the flooring. The item shall also include providing doorprofiles wherever required. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge.The item include supply and fixing of skirting profile and doorprofile to the flooring and no extra will be paid for this. (Basic Cost Rs450 /- Per Sqft)

44 CARPET FLOORING 50 SQM

PAGE 9 OF 31




Providing and laying 100% synthetic carpet of density 1500 g/sqm andof approved shade as per manufacturer's specificationsincluding matching and finishing joints etc., complete in allrespects as per the drawing and the directions of the Engineer-in-Charge. The item include providing and laying 12 mm thk coir underlaybelow the synthetic carpet (Basic rate Rs 180 /- Per sqft).

45 PELMET VENEER FINISHED 10 SQMProviding and fixing in position pelmet out of 19mm thk plywood finishedwith veneer & melamine polish from the front and synthetic enamel paintfrom inside. Size of the pelmet - 150 mm * 175 mm. All complete as perdetail drawing, as specified and as directed by Architect / Consultant /Project - In - Charge. The mode of mesurement will be total width in boththe planes multipied by length. (Basic Cost of Veneer Rs 1614 /- PerSqm)

46 PLY WOOD FACIA VENEER FINISHED 25 RMTProviding & fixing in position Plywood Facia - 300 mm wide out of 19mmthk plywood finished with approved Veneer & 3 coats of melaminepolish. Rate including wooden edge moulding on exposed edge of faciawith melamine polish etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Basic Cost of Veneer Rs 1614 /- Per Sqm)

47 A.C FACIA VENEER FINISHED 35 SQMProviding & fixing in position A.C. facia with necessary wooden framework for supports, front facia out of 19mm thk plywood finished withapproved veneer and melamine polish. Provision to be made for fixingA.C. grills as per drawings & details. Item to include wooden mouldings(finished with melamine polish) as per drawings etc. All complete as perdetail drawing, as specified and as directed by Architect / Consultant /Project - In - Charge. (Basic Cost of Veneer Rs 1614 /- Per Sqm)

FITTINGS & FIXTURES48 CONCEALED DOOR CLOSER (DORMA / HAFELE) ITS 96 8 NO

Providing and fixing Concealed Door Closer Dorma ITS 96 EN -2-4 Camaction door closure /approved equivalent suitable for max width of 1400mm or approved equivalent make. The door closer shall be withintegrated in the frame or door leaf, with rapidly decreasing openingresistance. Closing sped and latching action adjustable; mechanicallycushioned limit stay. Adaptation to different rebate clearances possiblenon-handled (i.e. suitable for right hand & left hand door); max.openingangle 120 degree. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge.

49 FLOOR SPRING (DORMA / HAFELE) BTS 75 7 NOProviding and fixing floor springs Dorma make BTS 75 V with zerodegree open function or approved equivalent. The floor spring should bewith adjustable closing force and closing speed. Closing action effectiveform approx 175 degree, with full hydraulic sequential control and backcheck. Including cement box, replaceable standard spindle and SScover plate. Non handed; also suitable for double action doors coverplate material and finish: stainless steel of approved make andspecification etc. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge.

PAGE 10 OF 31




50 DOOR CLOSER (DORMA / HAFELE) TS 71 3 NOProviding and fixing Door Closures, Dorma TS 71EN-3/4 rack & pinionoverhead door closure suitable for door width max 1100 mm withstandard arm or approved equivalent. All complete as per detail drawing,as specified and as directed by Architect / Consultant / Project - In -Charge.

51 S.S HANDLES - 600 MM high 2 NOProviding SS Handles of size 600 mm high in pairs to doors etc of SSgarde 316 as per approved profile of M/s Kitch or approved equivalent.

52 Same as above but of size 200 MM HIGH 16 NO53 STAINLESS STEEL BALL BEARING HINGES SIZE 100 X 73 X 3 MM 52 NO

Providing and fixing Heavy duty ball bearing hinges of size 3/4" (100 mmx 75 mm x 3mm) suitable for wooden and steel doors with allaccessories complete (Cat No. 551 BB stain less steel of M/s Dorma orapproved equivalent). All complete as per detail drawing, as specifiedand as directed by Architect / Consultant / Project - In - Charge.

54 PROVIDING UPHOLSTERY 45 RMTProviding fabric/leather upolshtrey to he existing sofas as per approvedfabric shade. Item to complete the change in upholstory with out makingany change to the design and also not damaging the structure of thesofas as per direaction of EIC/Architect. Basic rate of fabric is Rs 700per rmt

55 DEAD LOCK 16 NOSupply and fixing of SS dead locks of Dorma ref no- 778 make/approved equivalant with standard lock case for europrofile cylinder ofrequired size for minimum 60 mm thick door.

56 IN OUT TRAYS 5 NOProviding and arranging in position in-out trays made out of 12 mmplywood of size 300 mm x 350 mm x 50 mm ( one for in & one forout)and finished with veneer & melamine polish including necessary TWmembers finished with melamine polish etc.; complete in all respects asper the drawing and the directions of the EIC. PAINTING WORK

57 PLASTIC EMULSION PAINT 170 SQMProviding and applying 3 or more coats of superior quality of PlasticEmulsion Paint of approvd make on Ceiling/partition of approved makeand shade and to give an even shade including preparation of surface,applying primer of approved make etc including surface preparation. Allcomplete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge & manufacturer's specifications. Rateto include additional coat of paint if required to get smooth and uniformfinish.

58 ZINC PAINT 100 SQMProviding and applying Zinc paint of approved make and shadeincluding, using roller to get approved level surface. Job to includemaking necessary surface preparation to receive paint etc. All completeas per detail drawing, as specified and as directed by Architect /Consultant / Project - In - Charge.

59 TEXTURE PAINT ON WALL 90 SQM

PAGE 11 OF 31




Providing and applying Texture Paint including preparing surface, usingroller to get approved texturised surface. Job to include making requiredsurface preparation, to receive Texture paint finish etc. All complete asper detail drawing, as specified and as directed by Architect / Consultant/ Project - In - Charge.

60 LUSTER PAINT 50 SQMProviding and applying Luster paint including, using roller to getapproved texturised surface. Job to include making necessary surfacepreparation to receive paint etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge.

61 SYNETHETIC ENAMEL PAINT 25 SQMProviding and applying 3 coats of Synthetic Enamel Paint of approvedmake quality, shade over one coat of primer and leveling course. Rate toinclude scrapping wall surfaces, applying putty for proper finish,applying necessary. coat of primer to get firm surface to receive paint. All complete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge.

62 WATER PROOF PAINT 50 SQMProviding & applying 2 coats of water-proofed cement paint Apex ofasian paint/`weather shield’ from I.C.I. or approved equivalent shadeand make as per the manufacturers specifications, including necessarydouble scaffolding & surface preparation, thoroughly wetting surface &complete with curing with single base coat of the same, which is to beincluded in this item only. Rate to be applicable for all heights & levelssurfaces & texture. No extra payable for extra paint consumption due tosurface texture.

63 DUCO PAINT 10 SQMProviding and applying in 3 coats lacquer paint of "DUCO" / approvedequivalent.make & shade over metallic surfaces / wooden surfaces afterpreparing the surface with water proof putty to get proper surfaces,applying necessary coats of primer and finishing with matt / texturedfinish laquer paint. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge.

FALSE CEILING WORK64 GYPSUM BOARD CEILING 140 SQM

Providing & fixing in position Gypsum Board False Ceiling of IndiaGypsum /approved equivalant as per manufacturer's specifications &instructions with 12.5mm thick `Gypboard'Screw-fixed to the undersideof suspended G.I. grid. G.I. grid should be constructed & suspendedfrom the main ceiling as per manufacturer's instructions & specificati-ons.G.I. grid should consist of ceiling sections(India Gypsum Code No.MF5) at maximum centre to centre distance 450mm, Perimeter channel(India Gypsum Code No. MF6A) intermediate channels (India GypsumCode No. MF7) at maximum centre to centre distance 1200mm. Theceiling sections should be fixed to intermediate channels with connectingclips (India Gypsum Code No. ME9). G.I.grid should be fixed to R.C.Cslab above with the help of 25mm x 0.5mm strap hanger (India Gypsumcode No.MF 8) & Soffit cleat (India Gypsum code No.P534). The jointsbetween soffit cleat & strap hanger and G.I grid & strap hanger shouldbe with 6.4 x 12.7 mm nut & bolt (India Gypsum Code

PAGE 12 OF 31




No.P 526). Soffit cleats should be fixed to R.C.C.ceiling with W.E.type12mm dia, 17/16" long steel Rawl plug maximum centre to centredistance (both ways) of strap hangers should be 1200mm. TheGypboard should be fixed to G.I.grid with 25mm long Drawall screws.The `Gypboard' to be used should be 12.5 mm thick tapered edgeboards. The boards should be taped & filled from underside toceiling.Item to be completed as per manufacturer's specificaion &instructions. The rate should include necessary additional ceilingsections & Intermediate channels should be provided at openings forlight fixtures, A.C. Ducts, vertical drops, offsets, etc. AdditionalIntermediate channels should be fixed to strap hangers for additionalsupport to prevent strap hangers from buckling/swayng at every1200mm. Item to be completed in all respect including necessarysleeves for ducts finishing of joints cut outs supports for A.C grills, lightfixtures, speakers etc.complete as per directions.

Note: No extra will be paid for ceiling drops and it will be considered asflat ceiling and if there is projected drop ceiling curved as per design indifferent level it will also be paid as addition to that but only averagebottom surface area will be considered. No extra will be paid for lightcuttings, cutting for glass or stain glass. No extra channel will be paid ifits is required for additional support

65 ACOUSTICAL TILE FLOORING 250 SQMProviding and fixing Acoustical Ceiling Tiles of 600 mm x 600 mm size ofOptra series of Armstrong or approved equivalent make fortraining/board room application , Contrast Square series, in truehorizontal level suspended on inter locking Grid system using hot dippedgalvanized steel section, entire surface pre - finished in baked polysterpaint, rotary stitched double-web construction main tee of size 42 x15mm. At every 600mm. C/C. maximum and double rotary stitched crosstee of size 42 x 15mm at every 600 mm. C/c. and wall angle of size 19 x19mm. Fixed to the periphery of the wall. The tiles and grid system to beused as follows:FRAME WORK & INSTALLATION - SILHOUETTE SECTIONFRAME WORK CONSIST OFMain Runner spaced at 600 mm center, fixed to the roof at every 1200mm c/c. In using 2.0 mm thick pre-straightened GI wire. First and lasthanger should not be at a distance more than 450 mm from the adjacentwall.600 mm x 600 mm module to be formed by fixing 600 mm Cross Teebetween center of Main Runner.Wall Angle to be secured to wall at 450 mm centers. Installation to bedone as per approved Manufacturer’s specification.Mode of Measurements :- Measurements shall be wall to wall withoutany deductions for lights, diffusers etc. Job to executed by SpecializedAgency approved by the original manufacturer .

66 150 C WOOD FINISHED METALLIC CEILING 35 SQM

PAGE 13 OF 31




Providing and fixing Luxalon ®/approved equivalent 150C Non PerforatedAluminium panel of M/s. Hunter Douglas/approved equivalant make inwood finish/ approved colour consisting of panel 150mm wide x 15.5 mmdeep x 0.6mm thick with bevel edge, panel length up to 6 mtr, CoilCoated on a Continuous Paint Line, Double baked and roll formed fromenamelled corrosion resistance aluminium alloy AA 3005 (Al. Mg) forhigher strength and good roll forming characteristics. The Panels shallabut each other with a narrow V grove. Panel shall be clipped to a bakedenamelled aluminium Panel carrier of 32mm wide x 39mm deep x0.95mm thick in standard length of 5 mtr made of doubled bakedenamelled aluminium alloy AA 5050 (Al. Mg) black with cut outs to holdthe panels in a module of 225mm closed at a distance 1.00 mtr. Panelcarrier shall be suspended by means of G.I. suspension rod 4mmdiameter and a Galvanised suspension spring clip at a distance of 1.7mtr c/c

Wood paint Finish: Aluminum panels shall be chromatised formaximum bond between metal and paint, enamelled twice under hightemperature, one side with a full primer and finish coat the other side(inner side) with a primer coating and Skin Coat on a Continuous PaintLine.Mode of Measurements: Measurements shall be wall to wall withoutany deductions for lights, diffusers, columns etc.

67 CALCIUM SILICATE BOARD CEILING 20 SQMProviding and fixing Calcium silicate board of 8mm thick Hilux/approvedequivalent make regular frame of suspended ceiling comprisis ofgalvanized steel `perimeter channel of having .55 mm thickess andunequal flanges fixed to walls/partiion using nylon sleeves and screws at450 mm centers. The intermedite channel (.91 mm thick ) having twoequal flanges of 15 mm each and web of 45 m is suspended from th ofitat 1220 mm wit ceiling angle of width 25 mm x 10 mm x .5 mm fixed withcleat and steel expansion fasternes. The calcium silcate board to befixed along /acroos the ceiling sections with 25 mm long self driling andtappings screws at 200 m c/c . The joints to be finished with 48 mm widefibre tape to provide seamless finish. Additional perimeter channel andsuporting materials are to be provided to mke any opening for lightfittings ,diffusers etc. The frame work to be supported properly to maitainthe integrity o ceiling and shall be at no extra cost. Rate shall includejoining tape and compound. The item shall be paid ony on the finshedsurface only and any watsge will be in contractors scope.

POP CORNICES / MOULDINGProviding, casting & fixing in position decorative plaster of Parismouldings of sizes given below -as per drgs and diraction from EIC.

68 SIZE 100 X 75 MM 125 RMT69 SIZE 150 X 75 MM 150 RMT70 POP PUNNING 200 SQM

PAGE 14 OF 31




Providing and applying Plaster of Paris Punning in average 12 thicknesson walls, ceiling, beams and columns to bring the surface in plumb lineand level, including making the surface smooth, providing requiredgrooves on top of skirting etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Note :- Rate to include cost of Chipping and scrapping neeru orany other finish on the Existing plastered surface.)

LOOSE FURNITURE WORK71 TRAINING TABLE 1 NO

Providing and fixing in position Training Tables of size 11300 x 750 x750 of approved shape as per the detail drawing. The worktop made of19 mm thk double approved plywood with approved wooden edgemoulding finished with approved shade of Burl Veneer Finished withpolycoating. Sides of table should be finished with approved veneerfinished with melamine polish. Front Apron finished with 12 mm thkFrosted Glass Modesty Panel fixed on S.S Studs as per drgs. The itemto include providing 12mm thk marine ply laminated cable duct forproviding the AV system/cables, 12 mm thk approved marine ply on bothsides of wooden frame work finished with approved veneer on externalsurfaces & 1.0 mm thick approved laminate on internal surfaces &providing Aluminium Angle plates, Provision for goose rack mike etc. Alledges of table finished with wooden mouldings / lipping with melaminepolish.The item to be completed as per drgs and instructions. The actualsize mat slightly vary as per site condition

Footrest made up of 50mm dia S.S. footrest as per detail drg.Rate should be including cost of all hardware of approved make. Allcomplete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge. (Basic rate of veneer Rs 150 persqft)

72 CIRCULAR SIDE TABLE IN TRAINING RM 8 NOProviding and arranging in position Circular Side Tables of size dia 450mm of approved shape with necessary T.W./approved wood frame workof 50 x 25 mm finished with melamine polish & including necessaryhardware, approved adhesive as per drawings of the following sizes.19mm thk approved marine ply top finished with approved veneer &melamine polish and top to be finished with 12 mm thick Tinted GlassTop with machine polished beveled edges. wooden leg out of 50 x50mm in melamine polish, Additional Curve supports etc. All completeas per detail drawing, as specified and as directed by Architect /Consultant / Project - In - Charge. (Basic rate of veneer RS 70 per sqft)

73 CENTER TABLE IN RECEPTION AREA 4 NO

PAGE 15 OF 31




Providing and arranging in position Center Tables of size 600 mm x 600mm of approved shape with necessary T.W./approved wood frame workof 50 x 25 mm finished with melamine polish & including necessaryhardware, approved adhesive as per drawings of the following sizes. 19mm thk approved marine ply top finished with approved veneer &melamine polish and top to be finished with 12 mm thick Tinted GlassTop of approved shade with machine polished beveled edges. woodenleg out of 50 x 50mm in melamine polish. All complete as per detaildrawing, as specified and as directed by Architect / Consultant / Project -In - Charge. (Basic rate of veneer RS 70 per sqft)

74 CENTER TABLE IN EXECUTIVE DIINING & MD CABIN 3 NOProviding and arranging in position Center Tables of size 800 mm x 500mm of approved shape with necessary T.W. frame work of 50 x 25 mmfinished with melamine polish & including necessary hardware, approvedadhesive as per drawings of the following sizes. 19 mm thk approvedmarine ply top finished with approved veneer & melamine polish and topto be finished with 12 mm thick Tinted Glass Top with machine polishedbeveled edges. wooden leg out of 50 x 50mm in melamine polish. Allcomplete as per detail drawing, as specified and as directed by Architect/ Consultant / Project - In - Charge. (Basic rate of veneer RS 70 per sqft)

75 CIRCULAR SIDE TABLE IN EXECUTIVE DINNING NEAR STAIRCASE 3 NO

Providing and arranging in position Circular Side Tables of size dia 600mm of approved shape with necessary T.W. frame work of 50 x 25 mmfinished with melamine polish & including necessary hardware, approvedadhesive as per drawings of the following sizes. 19mm thk approvedmarine ply top finished with approved veneer & melamine polish and topto be finished with 12 mm thick Tinted Glass Top with machine polishedbeveled edges. wooden leg out of 50 x 50mm in melamine polish,Additional Curve supports etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Basic rate of veneer RS 70 per sqft)

76 CENTER TABLE IN EXECUTIVE DIINING 1 NOProviding and arranging in position Center Table of size 450 mm x 450mm of approved shape with necessary T.W. frame work of 50 x 25 mmfinished with approved veneer & melamine polish including necessaryhardware, approved adhesive as per drawings of the following sizes.19mm thk approved marine ply top finished with veneer melamine polishand top to be finished with 12 mm thick Tinted Glass Top with machinepolished beveled edges. wooden leg out of 50 x 50mm in melaminepolish. All complete as per detail drawing, as specified and as directedby Architect / Consultant / Project - In - Charge. (Basic rate of veneer RS70 per sqft)

77 CIRCULAR CENTER TABLE IN ED (IT) 1 NO

PAGE 16 OF 31




Providing and arranging in position Circular Center Table of size dia 600mm of approved shape with necessary T.W. frame work of 50 x 25 mmfinished with approved veneer & melamine polish including necessaryhardware, approved adhesive as per drawings of the following sizes.19mm thk approved marine ply top finished with veneer melamine polishand top to be finished with 12 mm thick Tinted Glass Top with machinepolished beveled edges. wooden leg out of 50 x 50mm in melaminepolish, Additional Curve supports etc. All complete as per detail drawing,as specified and as directed by Architect / Consultant / Project - In -Charge. (Basic rate of Veneer Rs 70 /- Per Sqft)

78 SQUARE SIDE TABLE IN SECRETARY & ED (IT) 1 NOProviding and arranging in position Square Side Table of size 450 mm x450 mm of approved shape with necessary T.W. frame work of 50 x 25mm finished with approved veneer & melamine polish includingnecessary hardware, approved adhesive as per drawings of thefollowing sizes. 19mm thk approved marine ply top finished with veneermelamine polish and top to be finished with 12 mm thick Tinted GlassTop with machine polished beveled edges. wooden leg out of 50 x50mm in melamine polish. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Basic rate of Veneer Rs 70 /- Per Sqft)

79 SQUARE SIDE TABLE IN MD CABIN 2 NOProviding and arranging in position Square Side Table of size 600 mm x600 mm of approved shape with necessary T.W. frame work of 50 x 25mm finished with approved veneer & melamine polish includingnecessary hardware, approved adhesive as per drawings of thefollowing sizes. 19mm thk approved marine ply top finished with veneermelamine polish and top to be finished with 12 mm thick Tinted GlassTop with machine polished beveled edges. wooden leg out of 50 x50mm in melamine polish. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Basic rate of veneer RS 70 per sqft)

80 BOARD RM OVAL SHAPE TABLE 1 NOProviding and fixing in position Board Room Table of size 5700 mm x2300 mm of approved shape shown in drawing. Table top made out of19 mm thk marine plywood and finished with approved veneer &polycoating made up of 38mm thk ply with veneer finish bracket vertical@ 1500 c/c. running band in plywood finished with approved veneer andmelamine polish. 19mm thick approved 2 nos of plain glass, provision forcable manager / cable trays etc including necessary hardware,approved Fittings and fixtures etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. (Basic rate of burl veneer RS 70 per sqft and natural veneer Rs70 per sqft)

81 ED (IT) TABLE 1 NO

PAGE 17 OF 31




Providing and Fixing in position ED (IT) Table of size 2100 mm x 900mm of approved Shape made up of 19 mm thk approved marine plywood including , Drawer Unit, Filling Storage, Space for CPU, 2" thk marine plyfor footrest with veneer finish. 6 mm thk approved marine plywood forrear side of side unit. The Table Top shall be finished with burl veneerand polycoating of approved colour, shade. Sides, apron, front sidesfinish with natural veneer and melamine polish. 19 mm thick approved ofplain glass. All drawers to be in marine plywood with 19 mm in front &12mm thk in rear & sides and bottom in 6 mm thk. marine plywoodfinished with approved veneer to all external surfaces & 1.0 mm thickapproved laminate to all internal surfaces. Drawer unit fronts & sides tobe finished with veneer & melamine polish. Edges of table 38 X 25 mmthk & 25 X 25 mm thk wooden moulding with melamine polish, 12 mmthk Frosted Glass Modesty Panel etc.All burl veneered surface to befinished with polycoating.

All trays in writing desks, side units to have concealed stoppers. Allpencil trays shall have small compartments for keeping miscellaneousstationaries. All beadings, mouldings and exposed woodwork to be inmatching wood. Foot rest shall be made out of 19 mm plywood and shallbe finished with 1mm thk approved laminate. Rest internal portion will befinished with french polish. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. All the tables shall have key board drawers to accommodate keyboardsand mouse where ever necessary as per drawings and also shall includeC.P.U unit as shown in the drawings. All drawer use Hettich/approvedequivalant sliding channels. No separate payment shall be made for this.All complete as per detail drawing, as specified and as directed byArchitect / Consultant / Project - In - Charge.

BASIC RATE OF BURL VENEER RS 2421 /- PER SQM)BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM

82 SECRETARY TABLE 1 NOProviding and Fixing in position Secretary Table of SIZE 1800 X 750 mmof approved Shape made up of 19 mm thk approved marine plywoodincluding Drawer Unit, Filling Storage, Tea - Tray, Pencil Tray, Pull - OutTray, Foot - Rest. 6 mm thk approved marine plywood for rear side ofside unit. 19 mm thk approved marine ply for Sliding Shutters finishedwith 3 - 4 mm thk approved Veneer to all external Surface & 1.0 mm thkapproved laminate to internal surfaces. The Table Top shall be finishedwith natural vneer and melamine polish of approved colour, shade.Sides, apron, front sides finish with approved veneer and melaminepolish. All drawers to be in marine plywood with 19 mm in front & 12mmthk in rear & sides and bottom in 6 mm thk. marine plywood finished withapproved veneer to all external surfaces & 1 mm thick approvedlaminate to all internal surfaces. All drawer use Hettich/approvedequivalant drawer channels. Drawer unit fronts & sides to be finishedwith veneer & melamine polish. Edges of table 38 X 25 mm thk & 25 X25 mm thk wooden moulding with melamine polish etc.

PAGE 18 OF 31




All trays in writing desks to have concealed stoppers. All pencil traysshall have small compartments for keeping miscellaneous stationaries.All beadings, mouldings and exposed woodwork to be in matching wood.Foot rest shall be made out of 19 mm plywood and shall be finished with1.0 mm thk approved laminate. Rest internal portion will be finished withfrench polish. All complete as per detail drawing, as specified and asdirected by Architect / Consultant / Project - In - Charge.

All the tables shall have key board drawers to accommodate keyboardsand mouse where ever necessary as per drawings and also shall includeCPU unit as shown in the drawings approved by EIC. No separatepayment shall be made for this. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM

83 C & MD EXECUTIVE TABLE 1 NOProviding and Fixing in position C & MD Executive Table of size 2400 X900 mm approved Shape made up of 19 mm thk approved marineplywood including Drawer Unit, Filling Storage, Space for CPU, 2" thkmarine ply for footrest with veneer finish. 6 mm thk approved marineplywood for rear side of side unit. 19 mm thk approved marine ply forSliding Shutters finished with 4 mm thk approved Veneer to all externalSurface & 1.0 mm thk approved laminate to internal surfaces. The TableTop shall be finished with burl veneer and polycoating of approvedcolour, shade. Sides, apron, front sides finish with veneer and melaminepolish. 19 mm thick approved of plain glass. All drawers to be in marineplywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6mm thk. marine plywood finished with approved veneer to all externalsurfaces & 1.0 mm thick approved laminate to all internal surfaces.Drawer unit fronts & sides to be finished with veneer & melamine polish.Edges of table 38 X 25 mm thk & 25 X 25 mm thk wooden moulding withmelamine polish, 12 mm thk Frosted Glass Modesty Panel etc.

All trays in writing desks, side units to have concealed stoppers. Allpencil trays shall have small compartments for keeping miscellaneousstationaries. All beadings, mouldings and exposed woodwork to be inmatching wood. Foot rest shall be made out of 19 mm plywood and shallbe finished with 1.0 mm thk approved laminate. Rest internal portion willbe finished with french polish. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge. All the tables shall have key board drawers to accommodate keyboardsand mouse where ever necessary as per drawings and also shall includeC.P.U unit as shown in the drawings. All drawer use nova slide side(grass make) No separate payment shall be made for this. All completeas per detail drawing, as specified and as directed by Architect /Consultant / Project - In - Charge. BASIC RATE OF BURL VENEER RS 2421 /- PER SQM)BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM

84 DISCUSSION OVAL SHAPE TABLE 1 NO

PAGE 19 OF 31




Providing and Fixing in position Meeting Room Table of size 2400 X1200 mm of approved shape with 12 mm thk Frosted Toughened GlassTop with rounded machine edge polished, 100 x 38 mm woodenmember with melamine polish, 6mm thk marine ply on both sides ofwooden frame 25 x 25 mm with approved veneer & melamine polish, SSmouldings 25 x 25 mm, 50 mm Dia SS foot rests, etc. as shown in thedrawings. Circular Box with necessary wooden Bracing finished withpaper approved Veneer with melamine polish. All complete as per detaildrawing, as specified and as directed by Architect / Consultant / Project -In - Charge. BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM

85 LECTRUM IN TRAINING ROOM 1 NOProviding Lectrm of size 600 x 450 and ht of 1200 mm as per drgs with19 mm plywood finished with veneer and melamine polish . The item tobe completed as per detail drawing, as specified and as directed byArchitect / Consultant / Project - In - Charge.Basic rate of veneer Rs 753per sqm.

86 SIDE UNITS WITH SLIDING SHUTTERS 3 SMTProviding side units of 600 mm wide x 750 mm ht made out of 19mmthick Marine Ply on sides, bottom fabricated as per detail. Shutters out of19mm thk. Marine Ply with handles, all sliding in the powder coatedaluminum channels having bearing for smooth movement, PVC guideetc. fixed to the shell and top finished with 19 mm thk. marine plywoodfinished with burl veneer and polycoating. Basic rate of burl veneer id Rs150 per sqft.All Shutters to be provided with required hardware e.g. brass tower boltand brass body lock with master key, as per instruction. The Back to beout of 6mm thick Marine Ply fixed to the shell with proper hardware,adhesive & as per details, designs & instructions. shelves made to of 19mm thk marine ply wood shall be provided on wooden supportswherever directed by EIC or as per drgs. The internal side of the shuttersshall be finished with 1mm thick decorative laminate of approved maketexture, pattern & shade fixed to top & side of shell & shutter withgrooves etc. as per detail incl. laminated lipping on edges with approvedhardware & adhesive etc. Back, shelves & inside area to be finished withFrench polish.

87 Same as above but of size 450 mm width and finished with naturalveneer of basic rate Rs 70 per sqft.

3 Smt

88 Multi purpose credenza unit 3 SmtSame as item 87of side unit but the item will be finished a combinationof open able shutters with glass, drawer box and sliding shutters ofplywood/glass as per drgs and instructions from EIC. Basic rate ofveneer Rs 70 per sqft.The top to be finished with polycoating and sideswith melamine polish.( Basic rate of veneer Rs 150/sqft)

MURALS / PICTURES -Providing and fixing Murals/Pictures of approved design and make asper direction from EIC. The design /picture will be approved from anyrenowned agency/painter in Hyderabad/Mumbai for the following basicrate.

89 Picture/painting with basic rate Rs 35000 2 No90 Picture/painting with basic rate Rs 20000 5 No91 Picture/painting with basic rate Rs 5000 10 No

FRP planters-

PAGE 20 OF 31




Providing & arranging in position FRP planters of following sizes as perapproved design with heavy gauge.

92 FRP planters of size -350mm dia. 10 No93 FRP planters of size 225mm * 225mm * 200mm ht. 10 No94 Brass planters 2 No

Providing lacquered brass planters of size 300 mm approved shape andmake.

95 WOODEN PLANTER: 1 NoProviding 305 x 305 x 400 mm size of wooden planters made out of 18mm thk. Marine Ply cladded with veneer of approved veins & best qualityTeak Wood lipping & molding, polished in melamine finish ext. & Frenchpolish int.ARTIFICIAL PLANTS :Providing and arranging artificial plants like creepers, leaves etc orflower arrangments. Including the pots with marble / stone pebbles,moss etc. as per approval and selection.

96 Medium bushes & Creepers up to 400 mm HT. : 10 No97 Artificial SMALL Plants arrangments up to 1100mm HT. : 5 No98 Artificial BIG Plants arrangment up to 1500mm HT. : 2 No

CIVIL WORKDEMOLITION WORKNote: The work of demolishing, cutting down, dismantling, etc. includespropping wherever required, removing the serviceable material asdirected, stacking the same at suitable place or as detailed in individualitems and carting away including loading and unloading on either side allunserviceable materials and debris from site to nearest municipal dump.The amount should include cost for carrying out any other unforeseenitems required for the proper execution of the work. The contractor willhave to put up a proper and sufficient hoarding, screen and fence duringthe time as may be necessary for the safety and convenience of theinmates of the existing buildings and maintain the same in the goodcondition during demolition and where necessary cause such hoardingor fence to be well lighted during the night to prevent accidents.Contractor will have to make good without any extra payment anydamage done during construction. The tenderer are requested in theirown interest to inspect the site to assess the nature and quantum ofwork.

Demolishing and carting away the debris from premises of existingflooring, electrical wiring, cabling, switches, sockets, partitions, paneling,walls, plaster, and other related services and elements complete as persite directions as detailed below:The item includes transportation,loading & unloading of the material in a place and dumping at municipalapproved dumping ground/ as directed by EIC at suitable place. The rtaeto include royalty to be paid to statutory bodies also in any

99 All types of Flooring and dado Including Backing plaster/concreteor any other type of bedding.

15 SMT

100 All types of Brick work 150 mm thk./ 230 mm thk. including plaster,tiles with conduits wiring Electrical boxes etc.No separatemeasurement will be given for plaster along with the brick work.

60 SMT

101 All type of water proofing including brick bat coba,weatheringcoarse etc

10 Smt

PAGE 21 OF 31




102 Granite, marble Removal with backing and stacking as directed. 5 Smt

103 R.C.C. All types up to 100 mm– . 2 Cmt104 Cement concretes All types -100 mm thk 2 Cmt105 All types of plaster 10 Smt106 Plumbing work to include all internal & external works such as G.I. ,

C.I. & PVC pipes & fittings up to any dia including any fittings . 1 No

107 Removal of all types of wooden doors including shutters and doorframes. The measurement will be taken for door opening

10 Smt

108 Light and Electrical fittings 1 NODismantling the existing installations of light and Electrical fittings,fixtures including wiring & cabling etc and stacking the same taking awayfrom the building premises to any unobjectionable area. The itemincludes transportation, loading & unloading of the material in anyunobjectionable place(The tender’s are advised to visit the site before quoting for theabove items to arrive on correct rate by taking into considerationsthe existing site conditions and all debris to be carried to thenearest municipal dump outside the building premises

109 230 MM THICK WALL 4 SQMProviding Second Class Burnt Brick Masonry with locally available bestquality bricks in cement mortar 1:4 in half brick thick wall including RCCbands of 100mm height with longitudinal steel reinforcement of 2 no 8mm dia bars constructed at every 1.0 m height of the wall includingscaffoldings, racking cut joints and watering complete. Rate should beapplicable for all heights etc. All complete as per detail drawing, asspecified and as directed by Architect / Consultant / Project - In -Charge.

110 15 MM THICK PLASTER 7 SQMProviding internal cement Plaster of average 15mm thick in a single coatin cement mortar 1:4 without neeru finish to concrete or brick surfaces inall positions including scaffolding, curing, complete etc. All complete asper detail drawing, as specified and as directed by Architect / Consultant/ Project - In - Charge. FLOORING & DADONOTE for flooring & Dado Work :All granite and marble tile flooring and dado sizes will be based on thesite dimensions.All ceramic / glazed tiles flooring / dados shall be done on tile module.

Actually executed quantity will be measured and no consideration shallbe given for wastage and difference of method of measurementbetween market / supplier's method & site method.The rate shall include laying the tiles / marble / granite / ceramic tiles / stone slabs to any pattern as specified and shown on drawings & noextra cost shall be paid for wastage of materials.

The rate shall also include cost of cutting tiles for fixing electricalboxes & switches, water-taps, nahani traps, plumbing accessories etc.for which no extra payment shall be made.

PAGE 22 OF 31




Thickness of marble/Italian marble, wherever mentioned shall be 18 mm(tolerance +/- 2mm) unless stated otherwise.Thickness of granite slab wherever mentioned shall be 18mm(Tolerance, +/-2 mm) unless stated otherwise.

111 ITALIAN MARBLE FLOORING 5 SQMProviding and fixing Italian marble Slabs for flooring of uniform colourwith 18 mm thick +2mm tolerance machine cut, machine polished innominal sizes, as per drawing & pattern including average 30mm thickcement, sand mortar bedding (1:4) close jointed & floated with matchingcement slurry laid to level as required, curing complete as perspecification, machine polished cleaned complete. No extra will bepayable towards wastage due to material pattern. Please note thatpayment will be in SQM of finished floor area only. Rate to be applicablefor all levels & heights. No extra is payable for additional thickness ofbedding to match adjoining floors, as per directions of Engineer – in –charge. The item includes complete finishing of the flooring with tinoxide polishing. Basic rate Rs 600 per sqft

112 FLAMED FINISHED GRANITE FLOORING 7 SqmProviding and fixing flame finished Granite Slabs for flooring of approvedpattern of uniform colour with 18 mm thick +2 mm tolerance machine cut,machine polished in nominal sizes, as per drawing & pattern includingaverage 30mm thick cement, sand mortar bedding (1:4) close jointed &floated with matching cement slurry laid to level as required, curingcomplete as per specification, machine polished cleaned complete. Rateto include cost of design patterns in combination of two or three differentcolour as per drg. and Tin Oxide polishing to provide mirror polish. Noextra will be payable towards wastage due to material pattern. Pleasenote payment will be in SQM of finished floor area only. Rate to beapplicable for all levels & heights. No extra is payable for additionalthickness of bedding to match adjoining floors, as per directions ofEngineer - In - Charge.(Basic rate granite slab Rs 180 per sqft)

113 FLAMED FINISHED GRANITE SKIRTING 20 RMTProviding and Fixing in position 100 mm high Approved flame finishgranite in approved colour and shade for Skirting in approved pattern totrue line and level on average 20 mm thick backing coat plaster in 1:4mix cement sand mortar, 1:1 cement grout filling the joints with white /colour cement including edge moulding, edge polishing, cleaning,watering, curing etc. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge. (Basic rategranite slab Rs 180 per sqft). The granite band for certain items coverdin the drgs will be paid under this item.

114 ITALIAN MARBLE SKIRTING 25 RMTProviding and Fixing in position 100 mm high Approved Dark ItalianMarble in approved colour and shade for Skirting in approved pattern totrue line and level on average 20 mm thick backing coat plaster in 1:4mix cement sand mortar, 1:1 cement grout filling the joints with white /colour cement including edge moulding, edge polishing, cleaning,watering, curing etc. All complete as per detail drawing, as specified andas directed by Architect / Consultant / Project - In - Charge. Basic rateRs 600 per sqft

115 GRANITE DADO 25 Smt

PAGE 23 OF 31




Providing and fixing Approved Granite slab dado/cladding of uniformcolour with 16 mm thick (-/+ 2mm tolerance) machine cut, machinepolished in nominal sizes, as per drawing & pattern including backingplastered surface and thereafter fixing marble by using adhesive incement paste as per the manufacturers specifications. (Including backup blushes). The dado substrate should be smooth, in plumb and linelevel. All as per manufacturer’s specifications & instructions of Engineer -In - Charge. (Only plan / elevational area will be measured. Wastage due to dimensional difference, pattern, and cutting sizes available will be tothe contractors account). Rate to include all holes & openings requiredfor fixtures and fittings. Necessary provision shall be made in the liftlobby cladding for providing the frosted glass and electrical points. Basicrate Rs 180 per sqft.

116 ITALIAN MARBLE DADO 25 SmtProviding and fixing Approved Italian marble slab dado of uniform colourwith 16 mm thick (-/+ 2mm tolerance) machine cut, machine polished innominal sizes, as per drawing & pattern including backing plasteredsurface and thereafter fixing marble by using adhesive in cement pasteas per the manufacturers specifications. (Including back up blushes).The dado substrate should be smooth in plumb and line level. All as permanufacturer’s specifications & instructions of Engineer - In - Charge.(Only plan / elevational area will be measured. Wastage due todimensional difference, pattern, and cutting sizes available will be to thecontractors account). Rate to include all holes & openings required forfixtures and fittings. Necessary provision shall be made in the lift lobbycladding for providing the frosted glass and electrical points. (BASICRATE OF ITALIAN MARBLE SLAB RS 600/- Sft)

PLUMBING / WATER SUPPLY WORK117 TWO WAY BIB COCK 1 NO

Providing & fixing 15 mm dia. C.P. brass concealed 2-way bib-cock withwall flange of approved make & quality. Cat. No. 5041 of JAGUAR orapproved equivalent.

118 Two way bib cock- queens collection 1 NOProviding & fixing 15 mm dia. C.P. brass concealed 2-way bib-cock withwall flange of approved make & quality. Cat. No. 7041 of JAGUAR orapproved equivalent.BIB TAP

119 Bib taps of Continental series(Cat No.037) 2 NO120 Bib tap of Queens collection(Cat No. 7037) 2 NO121 STOP COCK 2 NO122 EUROPEAN WC (HINDWARE / PARRYWARE) 2 NO

Providing and fixing in position European style water closet (EWC)consisting of the following including making water and drain connections.

Star white crystal cat no 20047 European W.C. pan wall hung Patternwith C.I. Chairs or brackets seat cover crystal type with C.P. brasshinges rubber buffers etc. Metro pole flush value (Cat No 1089 ofJaguar) concealed type with cover plate 40 mm size.WASH BASIN

Providing and fixing in position heavy tested screw down C.P. brass bib taps of Jaquar or equivalent approved make of the following series.

PAGE 24 OF 31




Providing and fixing in position washbasins including making water anddrain connections etc complete. The washbasins shall consist of thefollowing :Basin Mixer -Queens collection series ( Cat No. 7171)32mm dia CP brass waste coupling, CP Brass bottle trap, extensionpieces and wall flange. III. 15mm dia CP brass angle stop cock.( 7053 Jauger Make)

IV. 10mm CP brass /PVC connector pieces.123 560x 410 mm dia oval shape wash basin (Ref Cat no 10017) fixed on

marble / Granite counter.1 NO

124 Pedestal Wash basin 1 NoItem same as item 123 above but of pedestal type cat no 10007 ofHindware/approved equivalent with angular cock and other accsoories

125 Washbasin Counter 3 sqmProviding and fixing as per drawing wash basin Counter of 600mm wideconstructed out of the granite/marble stone sections combined in pairsto form sandwich type vertical members except the end touches to wall,set in cement mortar 1:3, exposed top surface to be finished with thefollowing polished stone having rounded edge cut as per profile on top ofsupporting cuddapah slab of 20 mm thick. Rate to include facia pieces,for all vertical & horizontal members as per drawing of polishedapproved stone with all exposed edges also polished and cut in profileas required. All joints shall be made water tight in perfect line, level &slope as desired including curing, polishing & cleaning all joints andfloating in coloured cement mortar. stone shall be of approved colour &shall be as per Architects approved lot. (Only plan area will bemeasured. Wastage due to dimensional difference, pattern, and cuttingsizes available will be to the contractors account). Rate to includeproviding all holes & openings required for fixtures and fittings.All as perdrawings and instructions from Engineer in charge.Item to include

providing 100mm granite skirting above platform. plan area will bemesured.TOILET ACCESSORIES & MISCELLANEOUS ITEM

126 Toilet Roll Holder 2 NOProviding & Fixing Toilet Paper Roll holders with stainless steel finish ofapproved make & quality.Dline Cat. Nos.( 07.4080.01.008 )/approvedequivalent

127 Glass selves 1 NOProviding & Fixing Glass shelves of AIS or Modiguard make asapproved, size 0'6'' - 3'0'' in 12mm thick toughened plane glass withpolished edges. Supported on S.S. ,'D' brackets, as approved.

128 Towel rails 2 NOProviding & fixing Towel rails with stainless steel finish of approvedmake & quality.Dline Cat.Nos.( 07.4070.01.500 )/approved equivalant.

129 Coat hooks 5 NOProviding & fixing Coats Hooks of stainless steel cat no 7761 ofJaquar/equivalantas approved make & quality.

130 Mirror 3 SMT

PAGE 25 OF 31




Providing and fixing in position at required level and elevation 6mm thk.Belgium / English make plate-glass beveled edge mirrors with one piecemasonite board at the back with C.P. round head screws finishedcomplete as per the specifications and as shown in the drawings.

131 Soap dish 1 NOProviding and fixing in position soap dish made up of stainless steel ofapproved make & quality.Dline Cat. Nos. ( 07.4030.02.001 )

132 Grab rail 1 NOD-Line make or approved equivalent Grab rails (Cat No.14.4614.02.306) all complete

133 SOAP DISPENSER 2 NOProviding and fixing in position soap dispensor made up of stainlesssteel of approved make & quality.Dline Cat. Nos. ( 07.4062.02.004 ).

134 Floor Traps 2 NOProviding & fixing C.I. Floor-traps of self-cleansing design with stainlesssteel grating including cutting & making good the same for floors andwalls wherever necessary, complete in all respects as per directions.

135 JET SPRAY 2 NOProviding hand facut cat no 577 of Jauquar /approved equivalent with allaccesories

136 URINAL (FLAT BACK) WITH FLUSH VALVE 1 NOProviding and fixing URINALS (CAT. NO.-OLYMPUS 96002) ofHindustan Vitreous make of star white approved colour fixed asspecified in the architectural drawing. Along with battery operatedsensor concealed type flushing valve with installations box of JAGUARcat no- 51077 or approved equivalent. large flat back urinal ofHINDWARE or approved equivalent and sensor concealed type flushingvalve SENSOR of JAGUAR or approved equivalent. .The item toincluding making of chases in the wall, fixing and making good the walletc.

137 UPVC PIPE 10 RMTSuply, installation, testing and commissioning of 32 mm Ultra PVC pipeswith all accessories complete.G.I. Pipes - concealedProviding and fixing in position C Class tested galvanized iron pipesconforming to IS 1239-1982 with all fittings like tees, bends, elbows,reducers, unions, nipples etc /including concealing the pipes in walls orunder floors, including making chases in the walls, enwrapping the pipeswith Hessian cloth soaked in bitumen, fixing in the wall with M.S. clampsand making good the wall surface / supporting on walls with thick M.S.clamps including 3 coats of approved enamel paint/ etc completehydraulic testing after laying the pipes as specified including makingholes in the walls or floors as required and making good the same.

138 GI pipes-Concealed -12 mm dia. 10 Rmt139 GI pipes-Concealed -20 mm dia. 10 Rmt140 GI pipes-Concelaed-25 mm dia. 10 Rmt141 GI pipes-Concelaed-32 mm dia 10 Rmt142 80 mm open GI pipe 5 RMT

GI pipes Open- Item same as GI pipes conceled but 0f 80 mm dia inopen complete with all ceesries

PAGE 26 OF 31




C.I. PipesProviding, laying and jointing in position heavy quality approved makeC.I. spigot and socket pipes for soil, waste and vent, conforming to IS1729 - 1964 including all fittings like offsets, bends cowls, single orNECO centre pipes conforming to I.S. double junctions of differentdegrees, with or without access doors etc. including caulking spun yarnsoaked in tar and jointing with molten lead and fixing them on floors orvertically against walls by specially made M.S. brackets or clamps so asto keep the pipes away from the wall including all scaffolding, watertesting after laying the pipes as specified and painting etc complete.

143 CI pipes-100 mm dia. 20 Rmt144 CI pipes-75 mm dia. 20 Rmt145 CI pipes-50 mm dia 10 RMT

C.I. special fittingsSupplying & fixing C.I. special fittings such as bends, tees, wyes, etc.with or without access as directed such as tees, bends, off-sets withlead caulked joints, complete in all respects as per directions.

146 C.I. special fittings-100 mm dia. 10 No147 C.I. special fittings-75 mm dia. 10 No148 C.I. special fittings-50mm dia 10 No149 Multi purpose unit in Toilet 1 NO

Providing a multi purpose unit in toilet with 12 mm marine ply in sidesand 6 mm ply in rear side and finished with laminate of approved shade.The shutter has to be finished with 4 mm glass of approved colour.

150 Stainless Steel signanage- Size 58 mm x 298 mm x 2mm 12 NOSupply, fixing d line/approved equivalent make stainless steel AISI 316grade satin finish signanage of size 58 x 298x 2 mm and having textwith 3 M double side tape for fixing complete.

151 Stainless Steel signanage- Size 147 mm x 147 mm x 2mm 2 NOSupply, fixing d line/approved equivalent make stainless steel AISI 316grade satin finish signanage of size 147 x 148x 2 mm and having textwith 3 M double side tape for fixing complete.POINT WIRING AND CONDUITING WORKSupplying, Installation, Testing and Commissioning of point wiring forlight/ call bell / exhaust fan points with 2 x 1.5 sq.mm. 1100V grade PVCinsulated colour coded stranded copper conductor FRLS wires made toIS:694 and continuous 1.5 sq.mm. copper conductor green colouredPVC insulated earth wire to run inside heavy gauge PVC conduit ofsuitable size, from switch Board to point via controlling SP switch,including PVC conduits & accessories like couplers, Elbows, junctionboxes etc. above false ceiling and in concealed manner on wall/partitionusing 6A modular type switch mounted on concealed metal box includingrequired numbers of BLANK SWITCH for closing the extra module asbelow:

152 One point controlled by one No. 6 Amp switch 30 NO153 Two points controlled by one No. 6 Amp switch 20 NO154 Three points controlled by one No. 6 Amp switch 10 NO155 Four points controlled by one No. 6 Amp switch 10 NO156 Cal bell buzzer 1 NO

Call bell buzzer with indicator & 4nos. bell push switches below table inconference room

PAGE 27 OF 31




157 Exhaust fan point 2 NOExhaust Fan point controlled by one No. 6 Amp switch & 6A 5pin socketnear exhaust. fanCircuit wiringSupply & Laying of PVC insulated Copper wire drawn in heavy gaugePVC conduits from distribution board to lighting switch boards/powersockets including conduits & all required accessories.

158 Circuit wiring with One no. circuit of 2 x 2.5 + 1.5 sq.mm wire in 20mmconduits.

200 RMT

159 Circuit wiring with Two no. circuit of 2 x 2.5 + 1.5 sq.mm wire in 25mmconduits.

200 RMT

160 Circuit wiring with one no. circuit of 2 x 4.0 + 2.5 sq.mm wire in 25mmconduits.

150 RMT

161 Circuit wiring with 5 no x 1.5 sqmm wire through 25 mm conduit 150 RMT162 3C x 2.5 sqmm Cu flexible cable through raceways/conduits for power

points300 RMT

Supply & Installation of wiring from monument box/ Switch socket outletsto distribution board with 3core x 2.5 sq.mm copper wire drawn in underfloor raceways.

163 6A switch 30 NOSupply and Installation of 6 Amp single switch socket universal typealong with plate outlet with G.I. box recessed on partition/wall.

164 16A switch 20 NOSupply & Installation of 6/16 Amp switch socket universal type outletalong with plate with G.I. box recessed on partition/wall.

165 6/16A along with SB 10 NOSupply & installation of 6/16A switch socket with universal pin alongwith switch board

166 Work station points 10 NOSupply & Installation of group of plug points for computer with modulartype, 5pin 6Amp universal Socket x 3 Nos. + 6/16A universal socketx 1no. to be installed on provided monument box /below table in partitionwith 2nos. 16Amp switches (with indicator) to be installed recessedon partition wall above table above side units with metal box .

167 20A industrial socket 10 NOSupply & Installation of 20 Amp Industrial type socket outlet with plugtop & 25 SP MCB recessed on partition / wall.LIGHT FIXTURESSupply & Installation of the following fixtures completely wired withchokes, roller lock type holder, Lamps/ fluorescent tubes and chainsupports from ceiling wherever necessary.

168 Spot Light 2x 18 W 20 NORecessed type spot light with 2 x 18 Watts CFL, Tulip Cat.ref. TPR 7163with electronic ballast of Philips/atco/Helvar make

169 Spot Light 2x 18 W-Dimmable 40 NORecessed type spot light with 2 x 18 Watts CFL, Tulip Cat.ref. TPR 7163with electronic dimmable ballast of Helvar/approved equivalent make asper attached specification

170 Spot light 2 x 18W 15 NORecessed twin Tube dark lighter with 2 x 18watts CFL, TULIP Cat. Ref.TPR 7165 with electronic ballast of Philips/atco/Helvar make

171 Spot light 2 x 18W 50 NO

PAGE 28 OF 31




Recessed twin Tube dark lighter with 2 x 18watts CFL, TULIP Cat. Ref.TPR 7165 with electronic dimmable ballast of Helvar/approvedequivalent make

172 Twin dark lighter 2 x 36W 15 NORecessed four Tube dark lighter with 2 x 36watts FTL , TULIP Cat. Ref.TPR 2301 with electronic ballast of Philips/atco/Helavar make

173 Twin dark lighter 2 x 36W 10 NORecessed twin dark lighter with 2 x 36watts CFL, TULIP Cat. Ref. TFR1131 TL D with electronic ballast of Philips/atco/Helvar make and withtrulite lamps of philips/osram

174 Halogen Spot LightRecessed Halogen spot light with 12V, 50 Watts with electronic ballastof Philips/atco/Helvar make, Tulip Cat.ref. TPR 7109

20 NO

175 Mirror LightWall mounted mirror light with 1 x 18 Watt CFL, Cat ref. Tulip TFW 1131with electronic ballast of Philips/atco/Helvar make

2 NO

176 Single patti Fixture 40 NOSingle Patti fixture with 1 x 36 Watt tube, Tulip cat ref. TFC 1002 withelectronic ballast of Philips/atco/Helvar make

177 Picture LightWall mounted picture light with 4 x 20 Watts casule lamp Cat. ref. TulipAHW 1007with transformer and ballast of Philips/atco/Helvar make

12 NO

178 Exhaust fansProviding and fixing of heavy duty Exhaust fans of window mounted typewith bird screen & louvered shutters – 9 inch dia of approved make andcolour

2 NO

179 ChandelierProviding & fixing chandelier type light fixture of approved design ofapproved make including lamp. (Basic rate Rs 20000)

3 NO

180 Wall mounted picture lightProviding & fixing picture light of approved design & make with lamps (Basic price Rs 3000)

15 NO

LAN & TELEPHONE NETWORKSupply, laying, connection (both end of cable RJ 45, socket or jack tocrimping), testing and commissioning of LAN system as given below.Cable to be laid through under floor trunking / PVC pipe/ metal cable trayand payment will be made in the respective items.Rate quoted for LANnetwork shall include the various testing procedure for the certification ofth system and the agency to provide the certification for system.

181 Cat. 6 cable from information outlet up to hub/Rack. 700 RMT182 Information outlets DUAL TYPE including termination with cat. 6 wires. 80 No

183 Information outlets SINGLE TYPE including termination with cat. 6 wires. 20 No

184 Dual face plates. 20 No185 Single face plate 20 No186 Blank inserts for face plates as required. 125 RMT

Supply & Installation of following, for TELEPHONE NETWORK.

PAGE 29 OF 31




Rate quoted for the following items shall be including supply, laying,connecting, testing and commissioning of telephone points with ferrule/tag marking of telephone points to lay from DB (krone connector) toreceiver with appropriate size of unarmored cable as per line diagramand specification with all necessary fittings to be laid through under floortrunking or through PVC pipe all complete and will be paid in therespective items.

187 Cat. 5 cable from telephone outlet to telephone junction box 500 RMT188 2 pair telephone cable of 0.5 sqmm of approved make 100 RMT189 20 pair, telephone cable 10 RMT190 50 pair, telephone cable 15 RMT191 Dual telephone socket to be mounted on provided monument box along

with faceplate.50 NO

192 Single telephone socket to be mounted on partition/wall with concealedmetal box along with faceplate.

20 No

Supply & installation of telephone junction box with enclosure :193 With 30 pair crone connector 1 NO

Supply & Installation of following, for Cable – TV System194 Co-axial TV socket with plate to be mounted on partition/wall with

concealed metal box.15 NO

195 RG11 co-axial cable in provided u/f trunking /conduit. 300 RMT196 3way-4way splitters for Cable-TV distribution for the floor 1 No

Supply & laying of heavy gauge PVC conduits with required accessoriesfor LAN/ telephone/computer/ TV system in partition/above false ceilingas per site requirement.

197 20mm PVC conduit 20 RMT198 25mm PVC conduit 20 RMT199 32mm PVC conduit 20 RMT

UNDER FLOOR RACEWAYS & ACCESSORIESSupply and installation, of under floor raceways & accessories including floor cutting, chiseling and necessary Civil work as per approval ofArchitect/Consultant.

200 80mm wide, 38mm deep single Compartment, 16 SWG, Aluminumextruded section for under floor raceways (rectangular shape).

700 RMT

201 200mm x 200mm x 42mm, 14 SWG G.I. Junction Box with G.I. cover. 15 No

202 280mm x 280mm x 42mm, 14 SWG G.I. Junction Box without G.I. cover. 10 No

203 G.I. covers for junction boxes, 14 SWG of size 280mm x 280mm. 20 No204 Stainless steel cover for junction boxes, 14 SWG of size 280mm x

280mm.20 No

205 Spike guards with 6 Amp sockets x 4 Nos. with 16 Amp commonswitches with indicator lamp for cabin area OF Anchor roma /equivalent.

10 No

206 Fixing of HPCL supplied sprinkler with flexible pipes to the existingsprinkler system as per instruction from eIC including any extensionpicece to the existing downtake pipes for fixing the sprinkler..

100 NO

207 Glass top for tables 5 SQMProviding and laying 5 mm glass for table top cut to size as per the tablewith smooth machine edge polishing. Necessary cutting shall be madefor the fixing 75 mm/100 mm cable managers in the table.The item willmesured in the finished surface area and no wastage will be paid.

208 Wooden Shelves 30 SQM

PAGE 30 OF 31




Providing & Fixing in position shelves in storage units out of 19 mmthick Marine Plywood of approved make with best quality Teak Woodbeddings in 35 mmx20 mm size on front & back with necessary supportbatons. All internal surfaces shall be finished with French polish ofapproved make and shade.

209 Polycoating 50 SQMProviding 2 or more coats of polyurethrene coating to veneered surfaceto obtain a smooth surface as per approved colour and shade. Additionalcoats to be obtained if smooth surface is not obtained.

210 3 Form partition 20 SQMProviding 3 form varia of 10 mm thickness of make Hounterdouglas orapproved equivalent of basic rate Rs 17000 per smt on partition,ceilingor wall etc complete as per manufactures specification.Thevariant/shade/theme will be selected during the execution by HPCL.

PAGE 31 OF 31

section f :schedule of quantities interior...

Documents