Section 703

Apparatus Inspection

ProceduresThe driver/operator should follow a

systematic procedure for inspecting apparatus

This ensures that all important items are checked every time the inspection is made.

Items to CheckBatteries Oil Tires

Proper Inflation

Braking System

Coolant System

Electrical System

Fuel Steering System

Hydraulic Fluids

Appliances Tools Lubrication

Equipment Foam Systems

Belts Hoses

ChecklistYou will be required to perform an

apparatus readiness check on a fire apparatus.

Apparatus MaintenanceMaintenance – keeping something in a

state of usefulness or readiness.

Repair – to restore or replace that which has become inoperable.

Apparatus MaintenanceEngine The most important phases of engine

maintenance are regular service inspections.

Apparatus MaintenanceDaily Maintenance: Includes checking oil level, radiator coolant

level, fuel levels, tires (proper inflation, wear, cuts), equipment inventory, checking visible and audible warning signals.

Apparatus MaintenanceWeekly Maintenance: Bleeding moisture from air brake tanks,

removing equipment from apparatus and cleaning, and the starting of all portable engines.

Apparatus MaintenancePeriodic Maintenance: Includes lubricating all motor, gear, or

hand operated appliances according to manufacturer’s specification

Apparatus MaintenanceBatteries Check voltage, specific gravity & corrosion

Check terminals & cablesAir Filter Should be serviced by qualified personnel

as required.

In Cab InspectionMirrors & seat are properly adjustedAll electrical switches are in the off position

prior to starting the apparatusLet engine warm up before putting under

full load (non emergency responses)Inspect seat belts, cuts & fraying

In Cab InspectionGauges are properly working:Speedometer, RPM gaugeOil Pressure, FuelAmmeter/VoltmeterAir pressure gauges,Temperature gaugesVacuum & Hydraulic Pressure gauges

In Cab InspectionControls are properly workingElectrical Equipment switchesTurn signal switchesHigh bean headlight switchesHeating & AC switchesRadio ControlsAudible warning devicesWindshield wiperDefroster controls

In Cab InspectionGauges

In Cab InspectionsElectronics & Controls

In Cab InspectionsElectronics & Controls

Pump Inspections Daily

Operate the pump drive control & pump engages

All pump panel gages are functioningDrain pump and hose lines completelyOperate pump controlsInspect water & foam tanksCheck the underside for leaksCheck Deck guns or turrets for range of motionOperate valves

Pump Inspections WeeklyFlush the pump with clear waterCheck & clean intake strainersCheck the pump gear box for proper oil

level and traces of waterOperate the pump primer with all pump

valves closed

Pump Inspections WeeklyOperate the changeover valveCheck packing glands for leaksOperate the pump pressure control devicesOperate the foam proportioning system

Pump Panel Gauges

Pump PanelMaster Intake Gauge

Pump PanelMaster Discharge Gauge

Compound Gauge