section 7 · 2015. 10. 29. · mj = mechanical joint socket ppfr = polypropylene flame retardant...

Fuseal® Corrosive Waste Piping System

Serviced by GF Little Rock

Section 7

21

Glossary

S = Fuseal Electrofusion Socket

SPG = Spigot End (same dimension as pipe outside diameter)

FT = Female Thread (Straight)

MT = Male Thread (Straight)

MPT = Male Pipe Thread

FPT = Female Pipe Thread

MJ = Mechanical Joint Socket

PPFR = Polypropylene Flame Retardant

PPNFR = Polypropylene Non-Flame Retardant

Product Line Description Discount

07 Fusion Accessories22 PPNFR Sch. 40 pipe23 PPFR Sch. 40 pipe26 PPFR Sch. 80 pipe28 PPNFR Sch. 80 pipe30 Neutralization Tanks and Accessories21 PPNFR Fusion Fittings-Fab51 PPFR Fusion Fittings-Fab52 PPFR Fusion Fittings-Molded53 PPFR MJ Fittings

The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and Conditions of Sale.

Not for Use with Compressed Air or Gases

DO NOT TEST with Air or Air over Water

GF Piping DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed air

or gases, or the testing of thermoplastic piping systems with compressed air or gases in above or below ground locations. The

use of GF Piping products in compressed air or gas systems automatically voids the warranty for such products, and their use

against our recommendation is entirely the responsibility and liability of the installer. GF Piping will not accept responsibility

for damage or impairment from its products, or other consequential or incidental damages caused by misapplication, incor-

rect assembly, and/or exposure to harmful substances or conditions.

For more information about any of our product lines, please call (800) 423-2686.

22

Fuseal PPFR & PPNFR PipeSchedule 40 PPFR1 1/2" - 6" Available in 20' lengths upon request

Size[inch]

lengths[ft]

Part No. Lift Qty[ft]

avg. od[inch]

min. wall[inch]

1 1∕2 10 F8004-015AA * 1800 1.900 0.1452 10 F8004-020AA * 1050 2.375 0.1543 10 F8004-030AA * 580 3.500 0.2164 10 F8004-040AA * 510 4.500 0.2376 10 F8004-060AA * 220 6.625 0.2808 20 F8004-080AB * 280 8.625 0.322

10 20 F8004-100AB * 220 10.750 0.36512 20 F8004-120AB * 100 12.750 0.406

Schedule 80 PPFR20' lengths available upon request

Size[inch]

lengths[ft]


avg. od[inch]

min. wall[inch]

1 1∕2 10 F8008-015AA * 1800 1.900 0.2002 10 F8008-020AA * 1050 2.375 0.2813 10 F8008-030AA * 580 3.500 0.3004 10 F8008-040AA * 510 4.500 0.3376 10 F8008-060AA * 220 6.625 0.432

Fuseal® PP

23

Schedule 40 PPNFR

Size[inch]

lengths[ft]


avg. od[inch]

min. wall[inch]

1 1∕2 20 P8004-015AB * 3600 1.900 0.1452 20 P8004-020AB * 2100 2.375 0.1543 20 P8004-030AB * 1160 3.500 0.2164 20 P8004-040AB * 1020 4.500 0.2376 20 P8004-060AB * 440 6.625 0.2808 20 P8004-080AB * 280 8.625 0.322

10 20 P8004-100AB * 220 10.750 0.36512 20 P8004-120AB * 100 12.750 0.40614 20 P8004-140AB * 100 14.000 0.43716 20 P8004-160AB * 100 16.000 0.500

Schedule 80 PPNFR

Size[inch]

lengths[ft]


avg. od[inch]

min. wall[inch]

1 1∕2 20 R8008-015AB * 3600 1.900 0.2002 20 R8008-020AB * 2100 2.375 0.2813 20 R8008-030AB * 1160 3.500 0.3004 20 R8008-040AB * 1020 4.500 0.3376 20 R8008-060AB * 440 6.625 0.4328 20 R8008-080AB * 280 8.625 0.500

10 20 R8008-100AB * 220 10.750 0.59312 20 R8008-120AB * 100 12.750 0.687

Fuseal® PP

24

Fuseal Fusion Fittings PPFRCoupling (S x S)

Size[inch]

Part No. N[inch]

1 1∕2 527001 0.062 527002 0.063 527003 0.134 527004 0.136 527006 0.19

Sleeve Coupling (S x S)

Size[inch]

Part No. L[inch]

1 1∕2 527041 1.562 527042 1.813 527043 2.004 527044 2.006 527046 2.69

1/4 Bend - Long Sweep (S x S)

Size[inch]

Part No. G[inch]

1 1∕2 526276 2.752 526277 3.253 526278 4.064 526279 4.946 526280F * 11.00

Fuseal® PP

25

1/4 Bend - Short Sweep (S x S)

Size[inch]

Part No. G[inch]

1 1∕2 526251 1.752 526252 2.313 526253 3.064 526254 3.886 526256 5.63

1/4 Bend - Street (Spg x S)

Size[inch]

Part No. G[inch]

K[inch]

1 1∕2 526451 1.75 3.112 526452 2.36 3.703 526453 3.06 4.754 526454 3.88 5.386 526456F * 11.00 10.81

1/4 Bend - Vent (S x S)

Size[inch]

Part No. G[inch]

1 1∕2 526201 1.192 526202 1.503 526203 1.88

1/6 Bend (S x S)

Size[inch]

Part No. J[inch]

1 1∕2 526601 1.002 526602 1.313 526603 1.694 526604 2.06

Fuseal® PP

26

1/8 Bend (S x S)

Size[inch]

Part No. J[inch]

1 1∕2 526501 1.132 526502 1.503 526503 1.754 526504 2.196 526506 3.37


Size[inch]

Part No. J[inch]

K[inch]

1 1∕2 526401 1.13 2.442 526402 1.50 2.503 526403 1.75 3.254 526404 2.19 3.256 526406 3.38 4.75

1/16 Bend (S x S)

Size[inch]

Part No. J[inch]

1 1∕2 526551 0.502 526552 0.693 526553 0.814 526554 1.00

3-Way Ell (S x S x S)

Size[inch]

Part No. G[inch]

1 1∕2 526261 1.752 526262 2.31

Fuseal® PP

27

45° Wye (S x S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

N[inch]

1 1∕2 526301 2.88 1.13 4.002 526302 3.63 1.38 5.003 526303 5.00 1.63 6.634 526304 6.38 1.88 8.256 526306 9.13 1.63 10.75

45° Wye - Reducing (S x S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

N[inch]

2 x 2 x 1 1∕2 526325 3.44 1.06 4.383 x 3 x 1 1∕2 526324 4.63 0.88 5.00

3 x 3 x 2 526326 4.63 0.88 5.004 x 4 x 2 526328 5.56 0.38 5.064 x 4 x 3 526327 6.00 1.06 6.636 x 6 x 2 526342 6.75 -1.13 4.736 x 6 x 3 526343 7.43 0.19 6.386 x 6 x 4 526344 7.75 0.68 7.73

45° Wye - Double (S x S x S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

N[inch]

1 1∕2 526380 3.50 1.13 4.632 526381 4.00 1.38 5.383 526382 5.00 1.63 7.634 526383 6.38 1.88 9.256 526351F * 12.18 6.18 18.38

45° Wye - Double Reducing (S x S x S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

N[inch]

2 x 2 x 1 1∕2 x 1 1∕2 526384 3.44 1.06 5.383 x 3 x 1 1∕2 x 1 1∕2 526389 4.31 0.50 5.25

3 x 3 x 2 x 2 526385 4.63 0.88 6.004 x 4 x 2 x 2 526386 5.56 0.38 6.064 x 4 x 3 x 3 526387 6.00 1.06 7.636 x 6 x 3 x 3 526390T * 9.94 1.75 12.386 x 6 x 4 x 4 526388T * 10.13 2.25 12.38

Fuseal® PP

28

Long Turn Tee Wye (S x S x S)

Size[inch]

Part No. G[inch]

N[inch]

1 1∕2 527301 3.94 3.632 527302 5.13 4.443 527303 7.56 6.504 527304 9.82 8.75

Long Turn Tee Wye - Reducing (S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

2 x 2 x 1 1∕2 527320 3.94 4.19 3.633 x 3 x 1 1∕2 527326 3.94 4.75 3.81

3 x 3 x 2 527327 5.13 5.69 4.754 x 4 x 2 527337 5.13 6.13 4.504 x 4 x 3 527338 7.56 8.06 6.50

Combo Wye and 1/8 Bend (S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

6 527306F * 11.41 13.18 10.75

Combo Wye and 1/8 Bend - Reducing (S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

6 x 6 x 2 527344F * 8.06 5.44 4.736 x 6 x 3 527339F * 7.00 9.19 6.386 x 6 x 4 527340F * 8.44 9.94 7.73

Fuseal® PP

29

Combo Wye and 1/8 Bend - Double (S x S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

1 1∕2 526801 5.31 5.31 4.632 526802 5.98 6.10 5.383 526803 7.47 7.59 7.634 526804 8.69 9.00 9.256 526806F * 18.18 15.44 18.38

Combo Wye and 1/8 Bend - Double Reducing (S x S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

2 x 2 x 1 1∕2 x 1 1∕2 526825 5.22 5.27 5.383 x 3 x 1 1∕2 x 1 1∕2 526824 5.27 5.89 5.25

3 x 3 x 2 x 2 526826 5.91 6.54 6.004 x 4 x 2 x 2 526828 6.08 7.20 6.064 x 4 x 3 x 3 526827 7.61 8.29 7.636 x 6 x 3 x 3 526843T * 11.18 11.18 12.386 x 6 x 4 x 4 526844T * 11.81 11.75 12.38

Sanitary Tee (S x S x S)

Size[inch]

Part No. G[inch]

N[inch]

1 1∕2 526151 1.75 2.752 526152 2.31 3.693 526153 3.06 4.884 526154 3.88 6.136 526156F 14.25 18.38

Sanitary Tee - Reducing (S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

2 x 2 x 1 1∕2 526126 1.96 2.21 3.173 x 3 x 1 1∕2 526131 1.75 2.56 2.68

3 x 3 x 2 526130 2.13 2.88 3.314 x 4 x 2 526134 2.06 3.31 3.194 x 4 x 3 526136 3.00 3.56 4.756 x 6 x 2 526137F * 3.93 6.00 6.136 x 6 x 3 526138F * 3.93 6.40 6.136 x 6 x 4 526139 3.93 4.90 6.13

Fuseal® PP

30

Sanitary Tee - Double (S x S x S x S)

Size[inch]

Part No. G[inch]

N[inch]

1 1∕2 526187 1.75 2.752 526186 2.31 3.693 526183 3.06 4.884 526185 3.88 6.13

Sanitary Tee - Double Reducing (S x S x S x S)

Size[inch]

Part No. GJ[inch]

GK[inch]

N[inch]

2 x 2 x 1 1∕2 x 1 1∕2 526188 1.94 2.19 3.133 x 3 x 1 1∕2 x 1 1∕2 526184F * 2.13 4.38 2.13

3 x 3 x 2 x 2 526181 2.13 2.88 3.13

Pipe Increaser (S x S)

Size[inch]

Part No. N[inch]

1 1∕2 x 2 527022 0.531 1∕2 x 3 527023F * 2.63

2 x 3 527024 0.882 x 4 527025 1.383 x 4 527026 0.943 x 6 527027F * 1.814 x 6 527028F * 1.63

Reducer Bushing (Spg x S)

Size[inch]

Part No. N[inch]

X[inch]

2 x 1 1∕2 526752 1.61 2.383 x 1 1∕2 526762 1.50 3.50

3 x 2 526754 1.50 3.504 x 2 526758 1.13 4.504 x 3 526756 1.50 4.506 x 4 526767 1.28 6.63

Fuseal® PP

31

Cap (S)

Size[inch]

Part No. HL[inch]

1 1∕2 527081 0.532 527082 0.323 527083 0.914 527084 1.096 527087 1.56

Male Adapter (S x MPT)

Size[inch]

Part No. HL[inch]

1 1∕2 526871 1.182 526872 1.253 526873 1.844 526874 2.006 526876F * 3.50

Female Adapter (S x FPT)

Size[inch]

Part No. HL[inch]

1 1∕2 526891 1.122 526892 1.153 526893 1.724 526894 1.816 526896 2.82

Fuseal® PP

32

Glass Pipe Adapter (Spg x Glass Pipe Bead)Used with Beaded Glass Coupling

Size[inch]

Part No. M[inch]

N[inch]

X[inch]

1 1∕2 7411 * 2.06 2.00 1.902 7412 * 2.58 2.00 2.383 7413 * 3.69 2.50 3.504 7414 * 4.84 2.50 4.506 7416 * 7.12 3.00 6.63

Iron Pipe Adapter (S x Iron Pipe Bead)used with High Silicon Iron Pipe Coupling

Size[inch]

Part No. M[inch]

N[inch]

1 1∕2 527431 * 2.25 1.882 527432 * 2.72 2.003 527433 * 3.81 2.634 527434 * 4.81 2.63

Caulked Joint Adapter (S x Caulked Joint Bead)used with Caulked Joint Coupling

Size[inch]

Part No. M[inch]

N[inch]

1 1∕2 527441 * 2.38 4.502 527442 * 2.88 4.253 527443 * 3.88 4.654 527444 * 4.88 4.83

Lead Pipe Adapter (S x Flare)

Size[inch]

Part No. HL[inch]

1 1∕2 527401 * 1.12

Fuseal® PP

33

Polyethylene Adapter(HDPE Socket x Female Union Nut)Used with Male Union Adapter

Size[inch]

Part No. HL[inch]

1 1∕2 7268A * 0.632 7278A * 0.75

Female Union Nut Adapter (S x Female Union Nut)

Size[inch]

Part No. HL[inch]

1 1∕2 527260A * 0.632 527270A * 0.75

Female Union Nut Adapter (Spg x Female Union Nut)

Size[inch]

Part No. HL[inch]

1 1∕2 7262A * 0.63

Fuseal® PP

34

Male Union Adapter (S x Male Union)

Size[inch]

Part No. HL[inch]

1 1∕2 527264 * 0.44

Male Union Adapter (Spg x Male Union)

Size[inch]

Part No. HL[inch]

2 7276 * 0.56

Male Union Adapter (MPT x Male Union)

Size[inch]

Part No. HL[inch]

2 7277 * 0.56

Fuseal® PP

35

Male Union Adapter (FPT x Male Union)

Size[inch]

Part No. HL[inch]

2 7275 * 0.50

Flange - Van Stone ANSI 150lb. Pattern (S)

Size[inch]

Part No. # holes boltholedia.[inch]

boltcir.dia.[inch]

D[inch]

N[inch]

W[inch]

1 1∕2 526931 4 0.56 3.88 5.00 0.31 0.752 526932 4 0.68 4.75 6.00 0.34 0.813 526933 4 0.75 6.00 7.50 0.44 1.004 526934 8 0.75 7.50 9.00 0.42 1.106 526936 8 0.88 9.50 10.94 0.45 1.26

Union (PPFR x PPFR)/PPFR Nut (S x S)

Size[inch]

FPMPart No.

EPDMPart No.

D[inch]

L[inch]

N[inch]

1 1∕2 528291 527271 3.75 3.38 0.372 528292 527272 4.63 3.68 0.683 528293 527273 6.74 4.68 0.904 528294 527274 8.38 5.54 1.00

Fuseal® PP

36

Expansion Joint (Spg x S)

Size[inch]

EPDMPart No.

A[inch]

B[inch]

C[inch]

D[inch]

L[inch]

1 1∕2 527811A * 0.97 4.09 0.75 2.65 4.102 527812A * 1.19 4.53 0.88 3.15 4.503 527813A * 1.59 5.31 0.94 4.64 5.254 527814A * 2.09 6.34 0.94 5.78 5.69

Fuseal® PP

37

Fuseal Cleanouts & Floor Drains PPFRNickel Bronze Floor Cleanout Housing

Size Part No. A[inch]

B[inch]

C[inch]

All 527715A * 6.13 2.81 5.70

Nickel Bronze Floor Cleanout Assembly (S)2" adjustment

Size[inch]

Part No. A[inch]

B[inch]

C[inch]

N[inch]

3 527713A * 6.13 2.81 5.70 2.784 527714A * 6.13 2.81 5.70 3.06

Cleanout Tee with Plug (S x S x FT)

Size[inch]

Part No. HL[inch]

N[inch]

1 1∕2 526114A 1.82 2.122 526115A 2.13 2.743 526116A 2.63 3.754 526117A 3.38 5.006 526118AF * 7.75 18.00

Fuseal® PP

38

Cleanout Adapter with Plug (Spg x FT)

Size[inch]

Part No. HL[inch]

N[inch]

X[inch]

1 1∕2 7701A 0.78 2.09 1.902 7702A 0.78 2.22 2.383 7703A 1.09 2.66 3.504 7704A 1.13 2.94 4.506 7706A 1.31 2.63 6.63

Countersunk Plug for Cleanout (MT)

Size[inch]

Part No. L[inch]

Q[inch]

3 7063 * 1.03 1.314 7064 * 1.16 1.63

Plug (MT)Used with cleanout tees, cleanout adapters and cleanout p-traps only

Size[inch]

Part No. L[inch]

Q[inch]

1 7049 * 0.99 0.75 Used for 527201A & 527202A1 1∕2 7051 * 1.56 1.00 Used for 527203A & 527204A

2 7052 * 1.54 1.253 7053 * 2.03 1.634 7054 * 2.16 2.006 7057 * 2.38 2.38

Fuseal® PP

39

Floor Drain (S)

Size[inch]

Part No. A[inch]

B[inch]

C[inch]

D[inch]

E[inch]

F[inch]

2 527749F * 8.50 12.00 1.63 6.69 5.06 5.813 527750 8.50 12.00 1.63 5.25 3.63 4.314 527751 8.50 12.00 1.63 5.25 3.63 4.316 527752F * 8.50 12.00 1.63 7.26 5.63 6.00

Replacement Strainer for Floor Drain

Size Part No.

All 7750-2A *

Replacement Grate for Floor Drain

Size Part No.

All 7750-3A *

Anti-Splash Funnel for Floor Drain

Size Part No. G[inch]

H[inch]

All 7750-5A * 6.00 4.00

Fuseal® PP

40

Fuseal Traps PPFRP-Trap (SxS)

Size[inch]

Part No. GJ[inch]

GN[inch]

L1[inch]

L2[inch]

L3[inch]

1 1∕2 527201 4.71 1.68 2.06 3.64 3.502 527202 6.94 2.44 2.71 4.75 5.063 527203 8.88 2.79 3.41 6.43 6.754 527204 10.75 3.88 3.88 8.06 8.506 527206F * 20.88 5.63 9.19 15.25 15.25

P-Trap with Cleanout (S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

L1[inch]

L2[inch]

L3[inch]

1 1∕2 527201A 4.71 1.68 2.06 3.64 3.502 527202A 6.94 2.44 2.71 4.75 5.063 527203A 8.88 2.79 3.41 6.43 6.754 527204A 10.75 3.88 3.88 8.06 8.50

P-Trap with Union Connection (S x S)

Size[inch]

Part No. GJ[inch]

GN[inch]

L1[inch]

L2[inch]

L3[inch]

1 1∕2 527211E * 4.84 1.68 2.38 4.00 3.502 527212E * 6.50 2.44 2.84 4.88 5.06

Fuseal® PP

41

P-Trap with Union Connection(Slip Joint Inlet x S)(Slip Joint Inlet x FPT)

Size[inch]

(S)Part No.

(FPT)Part No.

GJ[inch]

GN[inch]

L1[inch]

L2[inch]

L3[inch]

1 1∕2 527225 * 7225 * 4.51 1.80 2.08 3.71 3.30

Jar Trap (FPT Inlet x S Outlet)

Size[inch]

Part No. N[inch]

L[inch]

L1[inch]

1 1∕2 527242C * 2.75 9.50 1.63

Replacement Polypropylene Jar for Jar TrapTranslucent

Size NFRPart No.

1 Quart 7893 *

Replacement Gasket for Jar Trap

Size Part No.

1 Quart 77241-3 *

Fuseal® PP

42

Drum Trap with Domed Cap (Male Union Thread x Male Union Thread)

Size[inch]

Part No. D[inch]

G[inch]

L[inch]

L1[inch]

L2[inch]

1 1∕2 7246A * 6.50 4.31 13.44 2.75 4.502 7247A * 6.50 4.31 13.44 2.75 4.50

Drum Trap with Flat Cap (Male Union Thread x Male Union Thread)

Size[inch]

Part No. D[inch]

G[inch]

L[inch]

L1[inch]

L2[inch]

1 1∕2 7246B * 6.50 4.31 10.50 2.75 4.50

Drum Trap (S x S)Must field fuse body

Size[inch]

Part No. D[inch]

G[inch]

L[inch]

L1[inch]

L2[inch]

1 1∕2 527248 * 4.50 2.25 9.34 1.25 5.132 527249 * 4.50 2.38 9.34 1.35 5.13

Fuseal® PP

43

P-Trap Inlet Pipe (Spg x MPT)

Size[inch]

Part No. L[inch]

X[inch]

1 1∕2 7538 * 18.00 1.90

Sink Strainer Assembly (MT)Includes sink strainer, gasket, plug and locknut

Size[inch]

Part No. L[inch]

M[inch]

R[inch]

1 1∕2 7841A * 2.75 3.31 0.25

Sink Strainer Adapter (FT x Spg)

Size[inch]

Part No. D[inch]

L[inch]

X[inch]

1 1∕2 7211-7 * 2.88 3.38 1.90

Swivel Sink Strainer Adapter with Gasket (S x FT)

Size[inch]

Part No. L[inch]

N[inch]

1 1∕2 527217 * 1.72 0.44

Fuseal® PP

44

Swivel Sink Strainer Adapter with Gasket (Spg x FT)

Size[inch]

Part No. L[inch]

1 1∕2 7216 * 2.501 1∕2 7218 * 13.00

Replacement Gasket for Swivel Sink Strainer AdpaterSize[inch]

Part No.

1 1∕2 77216-2A *

Tailpiece Adapter (Spg x Brass Nut)

Size[inch]

Part No. L[inch]

X[inch]

1 1∕2 7211X3 * 2.13 1.90

Trap Primer w/FPT Tap (Spg x Spg)

Size[inch]

Part No. L[inch]

X[inch]

FPT[inch]

1 1∕2 7201 * 12.00 1.90 1∕22 7202 * 12.00 2.38 1∕23 7203 * 12.00 3.50 1∕24 7204 * 12.00 4.50 1∕26 7206 * 12.00 6.63 3∕4

Overflow Pipe

Size[inch]

Part No. L[inch]

X[inch]

1 1∕2 7842 * 7.88 1.90

Fuseal® PP

45

Cup Sink - MT OutletIncludes Sink Strainer, Plug and Retainer Nut

Size[inch]

Part No. H[inch]

H1[inch]

L[inch]

L1[inch]

W[inch]

W1[inch]

1 1∕2 7851A * 7.00 4.00 9.75 8.56 4.50 3.311 1∕2 7852A * 7.00 4.00 7.50 6.31 4.50 3.31

Replacement Parts for Cup SinkDescription Part No.

Strainer 7850-3A *Plug 7850-4A *

Fuseal® PP

46

Fuseal LD Fusion Fittings PPCoupling (S x S)

Size[inch]

NFRPart No.

FRPart No.

Minimum OrderQty

N[inch]

8 7008 * 527008 * 5 0.2510 7010 * 527100 * 3 0.2512 7020 * 527120 * 3 0.25

1/4 Bend - 3 Segment (S x S)

Size[inch]

NFRPart No.

FRPart No.

G[inch]

8 6258F * 526258F * 12.2510 6255F * 526255F * 14.2512 6257F * 526257F * 16.25


Size[inch]

NFRPart No.

FRPart No.

G[inch]

K[inch]

8 6458F * 526458F * 12.25 12.0010 6455F * 526455F * 14.25 14.0012 6457F * 526457F * 16.25 16.00

1/8 Bend (S x S)

Size[inch]

NFRPart No.

FRPart No.

J[inch]

8 6508F * 526508F * 6.9410 6505F * 526505F * 7.7512 6507F * 526507F * 8.50


Size[inch]

NFRPart No.

FRPart No.

J[inch]

K[inch]

8 6408F * 526408F * 6.94 6.6910 6405F * 526405F * 7.75 7.2512 6407F * 526407F * 8.50 8.25

Fuseal® PP

47

45° Wye (S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GN[inch]

N[inch]

8 6308F * 526308F * 15.50 7.00 22.5010 6305F * 526305F * 20.75 7.75 28.5012 6300F * 526300F * 22.00 8.50 30.50

45° Wye - Reducing (S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GN[inch]

N[inch]

8 x 8 x 3 6347T * 526347T * 10.50 1.50 12.008 x 8 x 4 6346T * 526346T * 11.00 2.00 13.008 x 8 x 6 6345T * 526345T * 12.50 3.44 16.00

10 x 10 x 3 6321T * 526321T * 12.00 2.00 14.0010 x 10 x 4 6322T * 526322T * 12.63 2.13 14.7510 x 10 x 6 6323T * 526323T * 14.50 4.00 18.5010 x 10 x 8 6324T * 526324T * 15.75 5.25 21.0012 x 12 x 4 6332T * 526332T * 14.00 1.50 15.5012 x 12 x 6 6333T * 526333T * 15.50 3.00 18.5012 x 12 x 8 6334T * 526334T * 17.25 4.50 24.75

12 x 12 x 10 6335T * 526335T * 19.25 6.00 25.25

45° Wye - Double (S x S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GN[inch]

N[inch]

8 6352F * 526352F * 15.50 7.00 22.5010 6355F * 526355F * 20.75 7.75 28.5012 6350F * 526350F * 22.00 8.50 30.50

45° Wye - Double Reducing (S x S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GN[inch]

N[inch]

8 x 8 x 3 x 3 6389T * 526393T * 10.50 1.50 12.008 x 8 x 4 x 4 6388T * 526391T * 11.00 2.00 13.008 x 8 x 6 x 6 6386T * 526392T * 12.50 3.50 16.00

10 x 10 x 3 x 3 6370T * 526370T * 13.18 2.18 15.3810 x 10 x 4 x 4 6371T * 526371T * 12.63 2.13 14.7510 x 10 x 6 x 6 6372T * 526372T * 14.50 4.00 18.5010 x 10 x 8 x 8 6373T * 526373T * 15.75 5.25 21.0012 x 12 x 4 x 4 6382T * 526394T * 14.00 1.50 15.5012 x 12 x 6 x 6 6383T * 526395T * 15.50 3.00 18.5012 x 12 x 8 x 8 6384T * 526396T * 17.25 4.50 21.75

12 x 12 x 10 x 10 6385T * 526397T * 19.25 6.00 25.25

Fuseal® PP

48

Combo Wye and 1/8 Bend (S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GK[inch]

GN[inch]

N[inch]

8 6716F * 526716F * 22.63 22.63 7.00 22.5010 6700F * 526700F * 27.75 27.75 7.75 28.5012 6701F * 526701F * 30.00 30.00 8.50 30.50

Combo Wye and 1/8 Bend - Reducing (S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GK[inch]

GN[inch]

N[inch]

8 x 8 x 3 6709T * 526709T * 11.25 11.50 1.50 12.008 x 8 x 4 6717T * 526717T * 12.00 12.25 2.00 13.008 x 8 x 6 6715T * 526715T * 15.69 15.56 3.50 16.00

10 x 10 x 3 6707T * 526707T * 12.81 12.56 2.00 14.0010 x 10 x 4 6721T * 526721T * 13.38 13.44 2.13 14.7510 x 10 x 6 6711T * 526711T * 17.63 17.00 4.00 18.5010 x 10 x 8 6712T * 526712T * 21.13 22.75 5.25 21.0012 x 12 x 4 6720T * 526720T * 13.69 14.38 1.50 15.5012 x 12 x 6 6718T * 526718T * 17.31 17.69 3.00 18.5012 x 12 x 8 6719T * 526719T * 21.44 23.81 4.50 21.75

12 x 12 x 10 6710T * 526710T * 24.88 26.69 6.00 25.25

Combo Wye and 1/8 Bend -Double (S x S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GK[inch]

GN[inch]

N[inch]

8 6816F * 526816F * 22.63 22.63 7.00 22.5010 6800F * 526800F * 27.75 27.75 7.75 28.5012 6801F * 526801F * 30.00 30.00 8.50 30.50

Combo Wye and 1/8 Bend -Double Reducing (S x S x S x S)

Size[inch]

NFRPart No.

FRPart No.

GJ[inch]

GK[inch]

GN[inch]

N[inch]

8 x 8 x 3 x 3 6809T * 526809T * 11.25 11.50 1.50 12.008 x 8 x 4 x 4 6817T * 526817T * 12.00 12.25 2.00 13.008 x 8 x 6 x 6 6815T * 526815T * 15.69 15.56 3.50 16.00

10 x 10 x 3 x 3 6807T * 526807T * 12.81 12.56 2.00 14.0010 x 10 x 4 x 4 6821T * 526821T * 13.38 13.44 2.13 14.7510 x 10 x 6 x 6 6811T * 526811T * 17.63 17.00 4.00 18.5010 x 10 x 8 x 8 6812T * 526812T * 21.13 22.75 5.25 21.0012 x 12 x 4 x 4 6820T * 526820T * 13.69 14.38 1.50 15.5012 x 12 x 6 x 6 6818T * 526818T * 17.31 17.69 3.00 18.5012 x 12 x 8 x 8 6819T * 526819T * 21.44 23.81 4.50 21.75

12 x 12 x 10 x 10 6810T * 526810T * 24.88 26.69 6.00 25.25

Fuseal® PP

49

Pipe Increaser (S x S)

Size[inch]

NFRPart No.

FRPart No.

N[inch]

8 x 3 527035F * 2.008 x 4 527034F * 1.758 x 6 527033F * 1.63

10 x 3 7040F * 527040F * 1.0010 x 4 7030F * 527030F * 1.1810 x 6 7031F * 527031F * 1.5010 x 8 7032F * 527032F * 2.1312 x 4 7036F * 527036F * 1.0012 x 6 7037F * 527037F * 1.5012 x 8 7038F * 527038F * 2.00

12 x 10 7039F * 527039F * 3.00

Cap (S)

Size[inch]

NFRPart No.

FRPart No.

HL[inch]

8 7088 * 527088 * 1.8110 7090F * 527090F * 3.3812 7092F * 527092F * 3.38

P-Trap (S x S)

Size[inch]

NFRPart No.

FRPart No.

G[inch]

L[inch]

L1[inch]

8 7208F * 527208F * 12.25 18.25 30.5010 7210F * 527210F * 14.25 22.25 36.5012 7212F * 527212F * 16.25 26.50 42.75

Male Adapter (S x MPT)

Size[inch]

NFRPart No.

HL[inch]

8 6878F * 4.38

Flange - Van Stone ANSI 150lb. Pattern (S)Flange ring material: PVC

Size[inch]

NFRPart No.

# holes boltholedia.[inch]

boltcir.dia.[inch]

D[inch]

N[inch]

R[inch]

Bolt Length[inch]

8 6928 * 8 0.88 11.75 13.50 0.44 1.71 3.5010 6930 * 12 1.00 14.25 16.00 0.50 1.73 3.7512 6932 * 12 1.00 17.00 19.00 0.50 1.71 4.00

Cleanout Tee with Plug (S x S x FT)

Size[inch]

NFRPart No.

HL[inch]

N[inch]

8 6119AF * 11.00 22.5010 6120AF * 14.00 28.5012 6121AF * 15.00 30.50

Fuseal® PP

50

Cleanout Adapter with Plug (Spg x FT)

Size[inch]

NFRPart No.

HL[inch]

8 7708AF * 4.0010 7710AF * 5.0012 7712AF * 5.00

Fuseal® PP

51

Fuseal Fusion AccessoriesFusion Collar with Plastic Clamp6" fusion collars without plastic clamp

Size[inch]

Part No. Minimum OrderQty

1 1∕2 6282 * 102 6283 * 103 6284 * 104 6285 * 106 6287 * 10

Loose Coil

Size[inch]


8 6088 * 1010 6090 * 1012 6092 * 10

Plastic Clamp

Size[inch]


1 1∕2 FU1282 * 102 FU1283 * 103 FU1284 * 104 FU1285 * 10

Metal Clamp

Size[inch]


6 FU112 * 18 FU118 * 1

10 FU119 * 112 FU120 * 1

Fuseal® PP

52

Fuseal Mechanical Joint Fittings PPFRCoupling (MJ x MJ)

Size[inch]


D[inch]

N[inch]

1 1∕2 9001 4 2.75 0.132 9002 2 3.25 0.133 9003 1 5.25 0.254 9004 1 6.63 0.25

1/4 Bend - Short Sweep (MJ x MJ)

Size[inch]


G[inch]

1 1∕2 8251 4 1.752 8252 2 2.313 8253 1 3.074 8254 1 3.88

1/4 Bend - Street (MJ x Spg)

Size[inch]


G[inch]

K[inch]

1 1∕2 8451 4 1.75 3.102 8452 2 2.31 3.753 8453 1 3.07 4.774 8454 1 3.88 6.08

Fuseal® PP

53

1/8 Bend (MJ x MJ)

Size[inch]


J[inch]

1 1∕2 8501 4 1.092 8502 2 1.413 8503 1 1.384 8504 1 1.50

1/8 Bend - Street (MJ x Spg)

Size[inch]


J[inch]

K[inch]

1 1∕2 8401 4 1.13 2.452 8402 2 1.41 2.843 8403 1 1.38 3.234 8404 1 1.50 3.75

45° Wye (MJ x MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

N[inch]

1 1∕2 8301 4 3.25 1.13 4.002 8302 2 4.13 1.38 5.003 8303 1 5.75 1.63 7.384 8304 1 7.38 1.88 9.25

Fuseal® PP

54

45° Wye - Reducing (MJ x MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

N[inch]

2 x 2 x 1 1∕2 8325 2 5.75 1.38 5.003 x 3 x 1 1∕2 8324 1 8.50 1.63 7.38

3 x 3 x 2 8326 1 8.50 1.63 7.384 x 4 x 2 8328 1 10.30 1.88 9.254 x 4 x 3 8327 1 10.06 1.88 9.25

Combination Wye and 1/8 Bend (MJ x MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

N[inch]

1 1∕2 9301 4 5.13 5.13 4.002 9302 2 6.31 6.25 5.003 9303 1 7.90 8.15 7.384 9304 1 9.54 9.92 9.25

Combo Wye and 1/8 Bend - Reducing (MJ x MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

N[inch]

2 x 2 x 1 1∕2 9320 2 7.94 6.31 5.003 x 3 x 1 1∕2 9326 1 8.86 9.35 7.38

3 x 3 x 2 9327 1 9.25 9.45 7.384 x 4 x 2 9337 1 12.04 9.77 9.254 x 4 x 3 9338 1 11.98 9.92 9.25

Fuseal® PP

55

Sanitary Tee (MJ x MJ x MJ)

Size[inch]

Part No. Minimum OrderQty[ft]

GJ[inch]

GN[inch]

N[inch]

1 1∕2 8151 4 1.75 1.75 3.002 8152 2 2.31 2.31 3.693 8153 1 3.06 3.31 4.884 8154 1 3.88 3.97 6.13

Sanitary Tee - Reducing (MJ x MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

N[inch]

2 x 2 x 1 1∕2 8126 2 2.31 2.31 3.693 x 3 x 1 1∕2 8131 1 5.75 3.31 4.88

3 x 3 x 2 8130 1 5.75 3.31 4.884 x 4 x 2 8134 1 6.79 3.98 6.134 x 4 x 3 8136 1 6.53 3.98 6.13

Reducer Bushing (Spg x MJ)

Size[inch]


HL[inch]

2 x 1 1∕2 8752 2 1.613 x 1 1∕2 8762 1 2.48

3 x 2 8754 1 2.484 x 2 8758 1 2.554 x 3 8756 1 2.44

Fuseal® PP

56

Male Adapter (MJ x MPT)

Size[inch]


HL[inch]

1 1∕2 8871 4 1.192 8872 2 1.223 8873 1 1.904 8874 1 2.00

Female Adapter (MJ x FPT)

Size[inch]


HL[inch]

1 1∕2 8891 4 1.192 8892 2 1.223 8893 1 2.934 8894 1 3.00

Fuseal Adapter (MJ x Spg)

Size[inch]


N[inch]

1 1∕2 9651 4 1.492 9652 2 1.173 9653 1 1.194 9654 1 1.20

Fuseal® PP

57

P-Trap (MJ x MJ)

Size[inch]


GJ[inch]

GN[inch]

L1[inch]

L2[inch]

L3[inch]

1 1∕2 9211E 4 5.25 1.68 3.04 4.79 3.502 9212E 2 8.40 4.04 2.77 4.96 5.063 9213E 1 10.06 3.94 3.19 6.44 6.754 9214E 1 12.38 5.06 5.40 8.25 8.50

U Bend (MJ x MJ)

Size[inch]


G[inch]

L3[inch]

1 1∕2 9211 2 1.68 3.50

MJ Kitincludes Nut, Seal Ring and Grab Ring

Size[inch]


1 1∕2 9001-KIT * 102 9002-KIT * 103 9003-KIT * 104 9004-KIT * 10

Spanner Wrench

Size[inch]


1 1∕2 & 2 8100 * 13 & 4 8101 * 1

Fuseal® PP

58

Neutralization Tanks and AccessoriesHDPE Round Dilution Tank with Cleanout -Black (FPT Inlet x MPT Outlet)

Size[gal (US)]

Part No.

1.5 PETANK-9151B*1.5 PETANK-9152B*

Size[gal (US)]

Standard Inlet[inch]

Standard Outlet[inch]

No. ofInlets

D[inch]

E[inch]

F[inch]

G[inch]

G1[inch]

G2[inch]

L1[inch]

1.5 1 1∕2 2 1 9.00 1.94 0 to 10 1.31 2.06 7.31 10.131.5 1 1∕2 2 2 9.00 1.94 0 to 10 1.31 2.06 7.31 10.13

Size[gal (US)]

L2[inch]

1.5 6.751.5 6.75

HDPE Round Dilution Tank with Cleanout -Translucent (FPT Inlet x MPT Outlet)

Size[gal (US)]

Part No.

1.5 PETANK-9151T *1.5 PETANK-9152T *

Size[gal (US)]

Standard Inlet[inch]

Standard Outlet[inch]

No. ofInlets

D[inch]

E[inch]

F[inch]

G[inch]

G1[inch]

G2[inch]

L1[inch]

1.5 1 1∕2 2 1 9.00 1.94 0 to 10 1.31 2.06 7.31 10.131.5 1 1∕2 2 2 9.00 1.94 0 to 10 1.31 2.06 7.31 10.13

Size[gal (US)]

L2[inch]

1.5 6.751.5 6.75

HDPE Rectangular Dilution Tank with Cleanout -Black (FPT Inlet x FPT Outlet)

Size[gal (US)]

Part No. StandardInlet/Outlet[inch]

H[inch]

H1[inch]

L[inch]

L1[inch]

L3[inch]

W[inch]

W1[inch]

1.5 PETANK-815 * 1 1∕2 9.00 10.50 12.50 10.00 5.25 8.50 8.001.5 PETANK-802 * 2 9.00 10.50 12.50 10.00 5.25 8.50 8.00

Fuseal® PP

59

HDPE Round Neutralization Tank, Bolted Top(FPT Inlet x FPT Outlet x FPT Vent)Welded cover and fiberglass reinforced tanks are available; contact factory for pricing

Size[gal (US)]

Part No. InsideDimensionDia. x Ht.[inch]

StandardInlet/Outlet[inch]

Standard Vent(FPT)[inch]

StandardInlet/OutletHeight (frombottom)[inch]

StandardVent Height(from top)[inch]

5.0 PETANK-005 * 11 x 14 2 2 11 215.0 PETANK-015 * 18 x 15 3 2 11 230.0 PETANK-030 * 18 x 29 3 2 22 355.0 PETANK-055 * 22 x 36 3 2 27 3

100.0 PETANK-100 * 28 x 42 4 3 36 3150.0 PETANK-150 * 31 x 48 4 3 38 3200.0 PETANK-200 * 36 x 48 4 3 38 3275.0 PETANK-275 * 42 x 48 4 3 38 3325.0 PETANK-325 * 36 x 74 4 3 38 3350.0 PETANK-350 * 48 x 48 4 3 38 3500.0 PETANK-500 * 52 x 60 6 3 52 3

Adder for larger than standard HDPE fitting sizesSize[inch]

InletPart No.

OutletPart No.

VentPart No.

2 to 3 PEI2-3 * PEO2-3 * PEV2-3 *3 to 4 PEI3-4 * PEO3-4 * PEV3-4 *4 to 6 PEI4-6 * PEO4-6 * PEV4-6 *

Fuseal® PP

60

PP Round Neutralization Tank, Bolted Top(FPT Inlet x FPT Outlet x FPT Vent)Welded cover and fiberglass reinforced tanks are available; contact factory for pricing

Size[gal (US)]

Part No. InsideDimensionDia. x Ht.[inch]

StandardInlet/Outlet[inch]

Standard Vent(FPT)[inch]

StandardInlet/OutletHeight (frombottom)[inch]

StandardVent Height(from top)[inch]

5.0 PPTANK-005 * 11 x 14 2 2 11 215.0 PPTANK-015 * 18 x 15 3 2 11 230.0 PPTANK-030 * 18 x 29 3 2 22 355.0 PPTANK-055 * 22 x 36 3 2 27 3

100.0 PPTANK-100 * 28 x 42 4 3 36 3150.0 PPTANK-150 * 31 x 48 4 3 38 3200.0 PPTANK-200 * 36 x 48 4 3 38 3275.0 PPTANK-275 * 42 x 48 4 3 38 3350.0 PPTANK-350 * 48 x 48 4 3 38 3500.0 PPTANK-500 * 52 x 60 6 3 52 3

Adder for larger than standard PP fitting sizesSize[inch]

InletPart No.

OutletPart No.

VentPart No.

2 to 3 PPI2-3 * PPO2-3 * PPV2-3 *3 to 4 PPI3-4 * PPO3-4 * PPV3-4 *4 to 6 PPI4-6 * PPO4-6 * PPV4-6 *

Manway AccessSize[inch]

Part No.

15 MWY-15 *

Limestone Chips (50 lb bag)Size[inch]

Part No.

1 to 3 LSCHIPS *

Fuseal® PP

61

section 7 · 2015. 10. 29. · mj = mechanical joint socket ppfr = polypropylene flame retardant...

Documents