section 10 corrosion protection section 10 corrosion protection requirements types of protection...
TRANSCRIPT
- Slide 1
- Slide 2
- Section 10 Corrosion Protection
- Slide 3
- Section 10 Corrosion Protection Requirements Types of Protection Cathodic Protection Piping STIP3 Tank Recordkeeping
- Slide 4
- Section 10 Requirements Corrosion Protection All metal components of UST System must have Corrosion Protection for components in contact with ground
- Slide 5
- Section 10 Types Corrosion Protection Completely non-corrosive material Steel-clad Tanks Corrosion-resistant coating with Cathodic Protection Interior tank lining Cathodic Protection Combinations
- Slide 6
- Section 10 Cathodic Corrosion Protection Prevents corrosion by making the ferrous substrate the Cathode of an electrochemical cell Designed by Corrosion Expert Galvanic Anodes Impressed Current
- Slide 7
- Section 10 Piping Corrosion Protection Completely non-corrosive material Corrosion-resistant coating with Cathodic Protection Cathodic Protection Coating with di-electric material
- Slide 8
- Section 10 STIP-3 Tanks Corrosion Protection Three types of protection Heavy-duty anti-corrosive coating Cathodic Protection Di-electric or nylon bushings
- Slide 9
- Section 10 Recordkeeping Corrosion Protection Test within 6 months of installation Test minimum of once every 3 years Reports from the last 2 tests must be retained