seavi 08 boxes for switches and differential, serie 82

2
GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The boxes for switches and differential Serie 82, are destinated to accomodation for the differents elements. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. They have several input footprints for tubes and does not need any tools for its drilling. It has metalic guide to fix the several elements , as well as a guide for dividing the space to house the (ICP 32) power switch. These boxes are modular, you can link to each other vertically, as many as the installer needed, using pieces of link. The doors and frames are individual. The doors have vents and also have a very strong nylon hinges with easy assembly and disassembly. They come in two models: with space for (ICP32) or without space. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 1.80 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. 29 SEQUENCE OF ASSEMBLING FOR BOX REF.23081 The assembling it´s the same for all references in this serie FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. Boxes for switches and differential Serie 82 Of flush mounted

Upload: seavi-slu

Post on 07-Mar-2016

217 views

Category:

Documents


4 download

DESCRIPTION

Boxes for switches and differential, serie 82

TRANSCRIPT

Page 1: Seavi 08 Boxes for switches and differential, serie 82

GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The boxes for switches and differential Serie 82, are destinated to accomodation for the differents elements. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. They have several input footprints for tubes and does not need any tools for its drilling. It has metalic guide to fix the several elements , as well as a guide for dividing the space to house the (ICP 32) power switch. These boxes are modular, you can link to each other vertically, as many as the installer needed, using pieces of link. The doors and frames are individual. The doors have vents and also have a very strong nylon hinges with easy assembly and disassembly. They come in two models: with space for (ICP32) or without space. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 1.80 Nm. The boxes are intended for use in an indoor enclosu re, for electrical installations or similar.

29

SEQUENCE OF ASSEMBLING FOR BOX REF.23081 The assembling it´s the same for all references in this serie

FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall.

Boxes for switches and differential Serie 82 Of flush mounted

Page 2: Seavi 08 Boxes for switches and differential, serie 82

REF. 23071

Unit Price: 0,2400 €

PIECES OF LINK FOR SERIE 82

REF. 23081 REF. 23187 REF. 23208-1

Pieces/Packing: 2 Unit Price: 21,7840 €

Measures mm: 240 x 476 x 68 Pieces/Packing: 6 Unit Price: 8,1000 €

Measures mm: 250 x 482 x 17 Pieces/Packing: 6 Unit Price: 13,7980 €

BOX OF 22 ELEMENTS

BOX FOR REF. 23081

FRAME+DOOR+SCREWS FOR BOX REF. 23081 - 23207

REF. 23082 REF. 23187-1 REF. 23208

Pieces/Packing: 2 Unit Price: 22,4880 €

Measures mm: 240 x 476 x 68 Pieces/Packing: 6 Unit Price: 8,5960 €

Measures mm: 250 x 482 x 17 Pieces/Packing: 6 Unit Price: 14,1750 €

BOX OF 16 + ICP 32

BOX FOR REF. 23082

FRAME+DOOR+SCREWS FOR BOX REF. 23082 - 23206

30

Boxes for switches and differential Serie 82 Of flush mounted