seamless and secure access (ssa) manual configuration ... › ... › guides ›...
TRANSCRIPT
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 1
Seamless and Secure Access (SSA) Manual
Configuration Guide
for iPad
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 2
1 Connect to Wireless@SGx via SSA
a) Tap on the “Settings” icon on the home screen
b) Turn “Wi-Fi” on
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 3
c) Tap “Others…” Key in “Wireless@SGx” in the “Name” box, and then tap on “Security”.
d) Select “WPA Enterprise” and tap on “Other Network” on the top left corner to return to the previous screen.
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 4
e) Enter your Wireless@SG username@domain and password. Tap on “Join” button on
the keyboard.
f) Tap “Accept” on the certificate pop-up.
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 5
g) Congratulations, you are connected to Wireless@SGx.
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 6
1.1
2 Uninstall SSA profile 2.1 Remove Wireless@SGx profile Follow the steps below to remove the SSA profile:
a) Go to your iPad “Settings” b) Go to General > Wi-Fi c) Tap on the arrow button” in “Wireless@SGx”
d) Tap the “Forget this network” button
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 7
Seamless and Secure (SSA) Manual Configuration Guide for iPad (Rev. 1.0)
Page 8
e) Confirm by tapping the “Forget” button in the following popup message