sdt led - regioluxdoc.regiolux.de/sdt-led_gb.pdf · ight source 1x t8 58w evg 70w 7600 lm 840 et...
TRANSCRIPT
2
SDGV LEDSDGS LED
SDT LED
4000 7600 >80 120
Comparative calculation*: Standard LED-lighting
Luminaire SDT+SDG+SDR T8 SDT+SDGV LED 7600
ight source 1x T8 58W EVG 70W 7600 lm 840 ET
Lighting suggestion/ requisite number of luminaires
234.000lm/ 45 luminaires
228.000lm/ 30 luminaires
Average illuminance 329lx 323lx
Total power consumption 2475W 2055W
Efficiency indicator 1,67 W/m²/100 lx 1,41 W/m²/100 lx
Number of luminaires saved 15 luminaires saved
Efficiency optimization 18,4%
*Room situation: Room 30m length, 15m width, room height 5m, mounting height 4,5m, standard reflection factors (0,7 ceiling; 0,5 walls; 0,2 floor)
L
• Equipped for increased requirements with regard to tightness
• Can be expanded by sensors• Different lumen packages • Released for environments prone to risk of fire (SDGS)
From the Regiolux rapid mount-ing system, you can always ex-pect a wide range of application possibilities for almost all uses from IP20, IP40 up to IP54. LED device mounts are also ready now to meet these tasks in a modern and notedly efficient way. In addition, different light directing components have been developed for various visual tasks and aesthetic standards
UNiVERSAL LiGhT RUN SySTEm
with the light quality. Sup-plemented by sensors, even large surfaces can be regulated according to daylight and pres-ence. This utilises the potential for sustainable energy savings in facility management. Everything else you might find you need for your perfect installation is available in the comprehensive resource of accessories.
3SDGVL LED
SDGVL LED
5800 >80 130
• SDGVL LED IP20
• SDGV LED IP40
• SDGS LED IP54
Type overview SDT LED
• Longer LED module• Homogeneous • High-performance
The wide use of LED lighting technology combines finan-cial saving possibilities with improved light quality and envi-ronmental protection for more than our SDT quick mounting system. Of course, different re-quirement profiles of our prod-uct line scaling also determine the LED device mounts. With a variably connectable SDGVL, we have added LED mounts to the performance class 5,800 lm in IP20. With continuous LED units
across the entire mount length, they now form a visually appeal-ing connected light strip. With this harmonious appearance, open beam, deep, wide and asymmetri-cal light controls can be combined and room zones can also be sophisticatedly illuminated. For lighting designers who place value on convincing efficiency calculations, the SDGVL LED now offers significantly more options in the SDT quick mounting system.
SDGVL LED – NEW opTiC AND pERfoRmANCE CLASSES
Comparative calculation*: Standard LED-lighting
Luminaire SDT+SDG+SDR T8 SDT+SDGV LED 7000
Light source 1x T8 58W EVG 45W 7000lm 840
Lighting suggestion/ requisite number of luminaires
234.400lm/ 45 luminaires
209.700lm/ 36 luminaires
Average illuminance 329lx 320lx
Total power consumption 2.475W 1.681W
Efficiency indicator 1,67 W/m²/100 lx 1,17 W/m²/100 lx
Number of luminaires saved 9 luminaires saved
Efficiency optimization 30%
*Room situation: Room 30m length, 15m width, room height 5m, mounting height 4,5m, standard reflection factors (0,7 ceiling; 0,5 walls; 0,2 floor)
L
4
SDFB T5/1500SDFB LED
SDFA T5/1500SDFA LED
SDHF T5/1500SDFH LED
SDFT T5/1500SDFT LED
m
SDT
SDGVL LED
SDGV S3 LED
SDGV M1S1 LED
SDGV LED
SDFBL LED
SDFAL LED
SDFTL LED
SDT LED
SDFB T5/1500SDFB LED
SDFA T5/1500SDFA LED
SDHF T5/1500SDFH LED
SDFT T5/1500SDFT LED
SDGS LED
IP20 SDT LEDSDT LED IP40 IP54
overview quick-fit mounting systems
Light directing
Mounting rail
LED device mount
Mirror wide angle
Mirror asymmetric angle
High-bay rack mirror
Mirror narrow angle
Control
5
SDGVL LED
New locking technologyintelligently and practically solved - the new locking technology for the variable placing of the LED device mount to the mounting rail: simply quick mounting.
• Expansion of LED device mounts by continuous LED units
• Homogeneous optic - perfect for linear appearance
• Variable possibilities of connection
• Three optimised light technologies
• New locking technology
• Excellent light output up to 90%
energy-e�cient
eco-friendly 5
y e a rs w a rran ty
6
SDGVL LED - IP20SDGVL LED - IP20
43
55
sfi1 ip 20
L
SDT
SDFBL LED
SDT
SDGVL
SDFBL LED
113
87
SDT+SDGVL/1500+SDFBL LED 45 W 5800 lm 840
Housing:Device mount with lateral lever lock, of galvanised, profiled sheet steel; LED unit constructed of natural anodised, in housing length seamless for light run without connectors, extruded sectional aluminium, surface with polyester enamel coating; end caps of plastic; can be positioned variably in light run. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including connection cable 1 m and rapid instal-lation plug connector with tool-free phase preselection and locating finger. Accessories note:Can be combined with the self-sup-porting specular reflectors SDFAL LED, SDFBL LED and SDFTL LED.
Device mount IP20
Type Unit Versions LxBxh/Dxh
SDGVL 1500 incl. LED 45W 1531 x 55 x 43
Dimensions
Type Unit Version Colour Ballast item number GLED - ip20SDGVL 1500 incl. LED 45W 5800lm 840 vw ET 1821 4014 150 3,70
ET dim DALi 1821 4016 650 3,70
Products
Type Colour material Details item number V GSDG -Contact 1-pole me St+mix for SDT, SDTQ 9200 0267 101 1 0,01
Spare parts
Combination
ηLB 90 % lm/W 130direct/indirect 100/0 % UGR lat./long. 17,1/25,1
7
SDFBL LED
59
87
SDFTL LED SDFAL LED
92
58
94
100
SDFBL LED - Self-support-ing mirror reflectorwide distribution
SDFTL LED - Self-support-ing mirror reflector narrow distribution
SDFAL LED - Self-support-ing mirror reflectorasymmetrical distribution
Accessories
Light directing component:Highly specular anodised ultra-pure reflector, self-supporting, seamless light run without connectors. Light distribution direct, wide distribu-tion, narrow distribution or asym-metrical beam distribution.
Self-supporting reflectors IP20
Type Unit Colour Details LxBxh item number G VSelf-supporting mirror reflectorSDfBL LED 1500 aeh LED ip20 1545 x 87 x 59 1873 3080 100 0,23 1SDfTL LED 1500 aes LED ip20 1545 x 92 x 58 1873 4080 100 0,25 1SDfAL LED 1500 aes LED ip20 1545 x 100 x 94 1873 6080 100 0,37 1
8
SDGV LED - IP40SDGV LED - IP40
sfi1 ip 40
L
43
55116
60
SDGV SDGV S3
SDT
SDFH LED
SDT
SDGV
SDFH LED
111
96
SDT+SDGV/1500+SDfh LED 70 W 7600 lm 840
Housing:Device mount of galvanised, profiled sheet steel; LED unit constructed of natural anodised, extruded sectional aluminium, surface with polyester enamel coating; end caps of plastic; can be positioned variably in light run. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including con-nection cable 1 m and rapid mount plug with toolless phase preselection and locating finger.Electrical technology M1/S1:Master luminaire with integrated control device and sensor for daylight and presence-dependent control of up to 31 ECG dim DALI slave luminaires, wired ready for connection via integrated 9-pole plug, including push button for programming accessible from outside. Functions: On/Off, daylight dependent control, pres-ence detection. System components used: LC-OM DALI MULTI 3 control unit, LC-OM LS/PD MULTI 3 light and presence sensor. Connection of up to three further sensor units SDBA S1 and networking of up to four master units is possible. Heat-resistant cables including connection cable 1 m and rapid mount plug with toolless phase preselection and locating finger.Electrical technology S3:Sensor unit with integrated LC-OM HIGHBAY sensor for presence-dependent switching, wired ready for connection, can be used to a ceiling height of 10 m. Electrical technology B3:With 3h emergency battery. Emer-gency light LED with integrated status indicator; 3-hour emergency light operation. One wire from through-wiring can be used as unswitched charge phase via a supplementary pole at the plug.Accessories note:Can be combined with the self-sup-porting specular reflectors SDFA LED, SDFB LED, SDFT LED and SDFH LED.
Device mount IP40
Type Unit Version Colour Ballast item number GLED - ip40SDGV 1500 incl. LED 35W 4000lm 840 vw ET 1820 1014 150 2,70
ET dim DALi 1820 1016 650 2,70ET Em pack 3h 1820 1714 150 3,04ET Em pack 3h dim DALi 1820 1716 650 3,04ET m1S1 dim DALi 1820 1116 650 2,86ET S3 1820 1214 150 2,88
incl. LED 70W 7600lm 840 vw ET 1820 2014 150 2,70ET dim DALi 1820 2016 650 2,70ET Em pack 3h 1820 2714 150 3,04ET Em pack 3h dim DALi 1820 2716 650 3,04ET m1S1 dim DALi 1820 2116 650 2,86ET S3 1820 2214 150 2,88
Products
Type Colour material Details item number V GSDG -Contact 1-pole me St+mix for SDT, SDTQ 9200 0267 101 1 0,01
Spare parts
Combination
ηLB 88 % lm/W 112direct/indirect 100/0 % UGR lat./long. 12,8/27,6
Type Unit Versions LxBxh/Dxh
SDGV 1500 incl. LED 35W 1531 x 55 x 43incl. LED 70W 1531 x 55 x 43
Dimensions
9
SDFB LED
59
87
SDFT LED SDFH LED SDFA LED
96
57
92
58
94
100
Self-supporting reflectors IP40SDFB LED - Self-supporting mirror reflectorwide distribution
Accessories
Light directing component:Reflection-enhanced ultra-pure alu-minium reflector, self-supporting, seamless light run available upon request. Direct light distribution, wide distribution, narrow distribu-tion, extreme narrow distribution or asymmetrical distribution.
SDFT LED - Self-supporting mirror reflectornarrow distribution
SDFH LED - Self-supporting mirror reflectorextreme narrow distribution
SDFA LED - Self-supporting mirror reflectorasymmetrical distribution
Type Unit Colour Details LxBxh item number G VSelf-supporting mirror reflectorSDfB LED 1500 aes LED ip40 1130 x 87 x 59 1873 3000 100 0,14 1SDfT LED 1500 aes LED ip40 1130 x 92 x 58 1873 4000 100 0,14 1SDfh LED 1500 aeh LED ip40 1130 x 96 x 57 1873 9000 100 0,15 1SDfA LED 1500 aes LED ip40 1130 x 100 x 94 1873 6000 100 0,17 1
10
SDGS LED - IP54SDGS LED - IP54
43
55
sdi1 ip 54
SDTSDT
SDGS
63
73
L
SDT+SDGS/1500 LED 35 W 4000 lm 840
Housing:Device mount insert of galvanised, profiled sheet steel, for ensuring the protection class with all-round closed seal which is sealed towards to the support rail; surface with polyester enamel coating; with two rotary catches for rapid mounting to rail, LED unit made from aluminium extrud-ing press profile, natural anodised. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including fixed 3-pole rapid installation plug connec-tor with tool-free phase preselection and locating finger.Accessories note:Can be combined with the self-sup-porting specular reflectors SDFA LED, SDFB LED, SDFT LED and SDFH LED. Type Unit Versions LxBxh/Dxh
SDGS 1500 incl. LED 35W 1531 x 55 x 43incl. LED 70W 1531 x 55 x 43
Device mount IP54
Dimensions
Combination
ηLB 91 % lm/W 120direct/indirect 100/0 % UGR lat./long. 25,9/26,4
Type Unit Version Colour Ballast item number GLED - ip54SDGS 1500 incl. LED 35W 4000lm 840 vw ET 1846 1014 100 2,70
ET dim DALi 1846 1016 600 2,70incl. LED 70W 7600lm 840 vw ET 1846 2014 100 2,70
ET dim DALi 1846 2016 600 2,70
Products
Type Colour material Details item number V GSDG -Contact 1-pole me St+mix for SDT, SDTQ 9200 0267 101 1 0,01
Spare parts
11
SDFB LED
59
87
SDFT LED SDFH LED SDFA LED
96
57
92
58
94
100
Light directing component:Reflection-enhanced ultra-pure alu-minium reflector, self-supporting, seamless light run available upon request. Direct light distribution, wide distribution, narrow distribu-tion, extreme narrow distribution or asymmetrical distribution.
Self-supporting reflectors IP54
Type Unit Colour Details LxBxH Item number G VSelf-supporting mirror reflectorSDFB LED 1500 aes LED IP40/54 1130 x 87 x 59 1873 3000 100 0,14 1SDFT LED 1500 aes LED IP40/54 1130 x 92 x 58 1873 4000 100 0,14 1SDFH LED 1500 aeh LED IP40/54 1130 x 96 x 57 1873 9000 100 0,15 1SDFA LED 1500 aes LED IP40/54 1130 x 100 x 94 1873 6000 100 0,17 1
Accessories
SDFB LED - Self-supporting mirror reflector wide distribution
SDFT LED - Self-supporting mirror reflector narrow distribution
SDFH LED - Self-supporting mirror reflectorextreme narrow distribution
SDFA LED - Self-supporting mirror reflectorasymmetrical distribution
12
63
46
L
SDT - Mounting distance max. 2.5 m
Housing:Mounting rail of profiled, torsionally stiff sheet steel, pregalvanised; wire flat cabe fitted at the factory and wired to rapid mounting socket part. Suitable for IP20, IP40 and IP54. To be equipped with either LED, T5 or T8 device mounts. Important: For the use of the 11-pole wired mounting rails special designs of device mounts are required.Mounting note:The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as ECG versions, the distance between the vertical suspension points may be increased to a maximum of 3.5 m. For wider distances (up to 4.5 m), an M suspension with the SDTQ-ZA accessory. Attention: The suspensions are possible only for horizontal light runs. Please get in touch for other installations or inclined suspension.
s i1 ip20/40/54
Type Unit LxBxh/Dxh
SDT1500/i 1500 1535 x 63 x 46SDT1500/ii 1500 3070 x 63 x 46SDT1500/iii 1500 4605 x 63 x 46
Mounting rail
Dimensions
Type Unit Wiring Colour/i /ii /iii
item number G item number G item number GSDT 1500 5x1,5 qmm vw 1825 1580 100 1,60 1825 2580 100 3,20 1825 3580 100 4,60
wa 1825 1580 105 1,60 1825 2580 105 3,20 1825 3580 105 4,605x2,5 qmm vw 1826 1580 100 1,65 1826 2580 100 3,30 1826 3580 100 4,80
wa 1826 1580 105 1,65 1826 2580 105 3,30 1826 3580 105 4,807x1,5 qmm vw 1827 1580 100 1,70 1827 2580 100 3,40 1827 3580 100 5,007x2,5 qmm vw 1828 1580 100 1,75 1828 2580 100 3,50 1828 3580 100 5,20
wa 1828 1580 105 1,75 1828 2580 105 3,50 1828 3580 105 5,207x2,5/4x1,5 qmm vw 1830 1580 100 1,75 1830 2580 100 3,50 1830 3580 100 5,20
Products
SDT - Mounting rail
13
Type Colour material Details item number V GSocket/plug combined SDTA f-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3092 100 1 0,01
SDTA m-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3090 100 1 0,01SDTA f-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2092 100 1 0,01SDTA m-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2090 100 1 0,01
Connection cable kit SDT -KDV vw St 2xmale+female 7 pol.; 7x2.5mm², 600mm for SDT 1884 7900 100 1 0,50protective cover ip20 SDTE vw pC for SDT, SDTQ, ATS 1890 0231 100 2 0,02
wa pC for SDT 1890 0231 105 2 0,02Single wire suspension SDCS ws Stainless steel + mix l=2000mm for SDT 1890 0034 100 1 0,07
SDCSE ws Stainless steel + mix Canopy D=123mm, rope D=1.5mm, L=2200mm, 3x1.5mm² for SDT
1890 0044 100 1 0,30
Chain suspension Kp 80 me St+pC l=800mm for pendant luminaires 9282 9080 100 1 0,27Knotenkette me St l=30m, for SDT, SDTQ, ATS, pendant luminaires 9282 9300 100 1 4,60SDh me inox for SDT, SDTQ, ATS 1890 0039 100 1 0,04SDTQ -ZA me St for SDT, SDTQ 6820 9300 110 1 0,70
Tubular pendant suspension
Rp 50 ws St+pC d=16mm, m13, l=500mm for pendant luminaires 9280 9050 100 1 0,25Rp 80 ws St+pC d=16mm, m13, l=800mm for pendant luminaires 9280 9080 100 1 0,33Rp 100 ws St+pC d=16mm, m13, l=1000mm for pendant luminaires 9280 9100 100 1 0,40SDRp me Stainless steel + mix for SDT 1890 0054 100 1 0,02
mounting clip SDCT me inox for SDT 1890 0042 100 1 0,03SDD me inox for SDT 1890 0033 100 1 0,01
Rail connecting piece SDT -K L vw St L-form 1884 7200 100 1 0,45wa St L-form 1884 7200 105 1 0,62
SDT -K T vw St T-form 1884 7300 100 1 0,84wa St T-form 1884 7300 105 1 0,84
SDT -K X vw St X-form 1884 7400 100 1 0,63wa St X-form 1884 7400 105 1 1,10
SDTV me St.galv. for SDT 1820 0020 100 1 0,22SDTVL me St.galv. unlockable for SDT 1820 0031 100 1 0,24
Accessories
Accessories
Accessories mounting rail SDT IP40/IP54
Accessories mounting rail SDT IP20
Type Colour material Details item number V GSocket/plug combined SDTA f-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3092 100 1 0,01
SDTA m-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3090 100 1 0,01SDTA f-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2092 100 1 0,01SDTA m-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2090 100 1 0,01
protective cover ip54 SDTES vw pC for SDT ip54 1890 0235 100 2 0,02
Single wire suspension SDCS ws Stainless steel + mix l=2000mm for SDT 1890 0034 100 1 0,07SDCSE ws Stainless steel + mix Canopy D=123mm, rope D=1.5mm, L=2200mm,
3x1.5mm² for SDT1890 0044 100 1 0,30
Chain suspension Kp 80 me St+pC l=800mm for pendant luminaires 9282 9080 100 1 0,27Knotenkette me St l=30m, for SDT, SDTQ, ATS, pendant luminaires 9282 9300 100 1 4,60SDh me inox for SDT, SDTQ, ATS 1890 0039 100 1 0,04
Tubular pendant suspension
Rp 50 ws St+pC d=16mm, m13, l=500mm for pendant luminaires 9280 9050 100 1 0,25Rp 80 ws St+pC d=16mm, m13, l=800mm for pendant luminaires 9280 9080 100 1 0,33Rp 100 ws St+pC d=16mm, m13, l=1000mm for pendant luminaires 9280 9100 100 1 0,40SDRp me Stainless steel + mix for SDT 1890 0054 100 1 0,02
mounting clip SDCT me inox for SDT 1890 0042 100 1 0,03SDD me inox for SDT 1890 0033 100 1 0,01
Rail connecting piece SDTVLS me St.galv. detachable for SDT ip54 1820 0050 100 1 0,25
14 System components SDT
Combination device mount and attachment parts for light directing
IP54LED mounting rail configuration (example) item number page of catalogue
SDGS-LED SDGS/1500 LED 35W 4000lm 840 ET 18461014100 new
SDGS-LED SDGS/1500 LED 70W 7600lm 840 ET 18462014100 new
SDBAS Blank cover for device mounts IP54 18826580100 455
Type light directing light distribution item number page of catalogue
SDFB LED Self-supporting mirror reflector wide 18733000100 460
SDFT LED Self-supporting mirror reflector narrow 18734000100 461
SDFH LED Self-supporting mirror reflector extreme narrow 18739000100 462
SDFA LED Self-supporting mirror reflector asymmetrical 18736000100 463
IP20LED mounting rail configuration (example) item number page of catalogue
SDGVL LED SDGVL/1500 LED 45W 5800lm 840 ET 18214014150 new
SDBA Blank cover for device mounts IP20 18836580100 444
Type light directing light distribution item number page of catalogue
SDFBL LED Self-supporting mirror reflector wide 18733080100 new
SDFTL LED Self-supporting mirror reflector narrow 18734080100 new
SDFAL LED Self-supporting mirror reflector asymmetrical 18736080100 new
IP40LED mounting rail configuration (example) item number page of catalogue
SDGV LED SDGV/1500 LED 35W 4000lm 840 ET 18201014150 427
SDGV LED SDGV/1500 LED 70W 7600lm 840 ET 18202014150 427
SDBAS Blank cover for device mounts IP54 18826580100 455
Type light directing light distribution item number page of catalogue
SDFB LED Self-supporting mirror reflector wide 18733000100 460
SDFT LED Self-supporting mirror reflector narrow 18734000100 461
SDFH LED Self-supporting mirror reflector extreme narrow 18739000100 462
SDFA LED Self-supporting mirror reflector asymmetrical 18736000100 463
15
SDT System-components
1er- mounting
rail
2er- mounting
rail
3er- mounting
rail
connector pair end caps
Bracket (or ceiling mount-
ing) +
device mounts SDG...->
if so +
self-supporting reflector
Legend ① ① ① ② ③ ④ ⑤ ⑥LED
IP20Item Designation Item number
SDT 1500/I 5x2,5mm²
18261580100
SDT 1500/II 5x2,5mm²
18262580100
SDT 1500/III 5x2,5mm²
18263580100
SDTVL
18200031100
SDTE
18900231100
SDH 18900039100 or
SDD 8900033100
SDGVL LED if so
+
SDFBL LED SDFTL LED SDFAL LED
LED IP40
SDTVL
18200031100
SDTES
18900235100
SDGV LED
if so +
SDFB LED SDFT LED SDFH LED SDFA LEDLED
IP54SDTVLS
18200050100
SDTES
18900235100
SDGS LED
if so +
Length [m] piece/unit piece piece piece piece piece piece piece piece
1,54 1 1 0 0 0 1 2 1 1
3,07 2 0 1 0 0 1 2 2 2
4,61 3 0 0 1 0 1 2 3 3
6,14 4 0 2 0 1 1 3 4 4
7,68 5 0 1 1 1 1 4 5 5
9,21 6 0 0 2 1 1 4 6 6
10,75 7 0 2 1 2 1 5 7 7
12,28 8 0 1 2 2 1 6 8 8
13,82 9 0 0 3 2 1 6 9 9
15,35 10 0 2 2 3 1 7 10 10
16,89 11 0 1 3 3 1 8 11 11
18,42 12 0 0 4 3 1 8 12 12
19,96 13 0 2 3 4 1 9 13 13
21,49 14 0 1 4 4 1 10 14 14
23,03 15 0 0 5 4 1 10 15 15
24,56 16 0 2 4 5 1 11 16 16
26,10 17 0 1 5 5 1 12 17 17
27,63 18 0 0 6 5 1 12 18 18
29,17 19 0 2 5 6 1 13 19 19
30,70 20 0 1 6 6 1 14 20 20
32,24 21 0 0 7 6 1 14 21 21
33,77 22 0 2 6 7 1 15 22 22
35,31 23 0 1 7 7 1 16 23 23
36,84 24 0 0 8 7 1 16 24 24
38,38 25 0 2 7 8 1 17 25 25
39,91 26 0 1 8 8 1 18 26 26
41,45 27 0 0 9 8 1 18 27 27
42,98 28 0 2 8 9 1 19 28 28
44,52 29 0 1 9 9 1 20 29 29
46,05 30 0 0 10 9 1 20 30 30
47,59 31 0 2 9 10 1 21 31 31
49,12 32 0 1 10 10 1 22 32 32
50,66 33 0 0 11 10 1 22 33 33
52,19 34 0 2 10 11 1 23 34 34
53,73 35 0 1 11 11 1 24 35 35
if required, plan feeder adapter SDTAF-7 Nr. 18203092100
System components SDT for quantity calculation
System modules SDTSy
stem
mod
ule
① SDT mounting rail > Select rails with 2- or 3-lengths with the corresponding wiring
④ Mountings > Chain hook or ceiling mounting in accordance with the distance between the suspensions
② Rail connectors > Calculate the type which suits the protection class
③ Rail end caps > Select the pairs of endpieces which suit the protection class
⑤Device mounts/
Blank cover
> Quantities with addtional attachment parts, if required, according to table calculation of quantities> Select the type which suit the protection class of the device mount
⑥ Light directing > Reflector in accordance with the planned light distribution
16
Made in GermanyRegiolux
Regiolux GmbH Hellinger Straße 3D 97486 Königsberg T +49 9525 89 0F +49 9525 89 [email protected]
alvia
lens line LED mLf LED
peanut LED
cubus LED
WBLR LEDprotection LED
vakant
pU LEDheip
doma LED
planara
SDT LED ip20/40/54WQL LED
ThLA LEDcooky LED
overview - LED luminaires
9999
144
1 21
3 1A
200
0 09
/13
MA
/HD
Subj
ect t
o m
odifi
catio
ns