scrap grapples product guide - abiljoavailable in various sizes to suit skid steer loaders up to...
TRANSCRIPT
Product Guide
Excavator Services Ltd
Tel: 01283 815544 Fax: 01283 812961
Unit 315 Fauld Ind. Est. Nr Tutbury, Burton on Trent
Staffordshire DE13 9HS
Web Site: www.abiljo.ltd.uk Email: [email protected]
Telehandler buckets
Available in sizes from 0.5m3 up to 6m3 for
all makes and models of telehanlder
Tractor Shovels
Available for all type of loader from 0.4m3 up
to 1.6m3 capacity
Loader forks
Available in various sizes to suit skid steer
loaders up to large telehanlders with or without
hydraulic grab
Scrap grapples
Available for all makes and models of
telehanlders
Multi-Buckets
Available for all makes and models of
telehandlers and loaders
Waste clamp buckets
Available for all makes and models of
Telehandlers with single and twin clamps
Quick hitch Adapters
Available in most combinations to allow fitting
of 1 style of attachments to a different quick
hitch
Access Platforms Available in various widths for fitting onto
standard fork carriages
Sweeper Brushes Available in 1500,1800 and 2450mm widths
Fit directly onto standard forks and we can also
supply adapters to fit them to mini excavators
Bale Spikes
Single and twin spikes for front loaders and
single three point linkage spikes
Rapped bale squeeze
Heavy duty Side squeeze bale handler with
remove-able tubes
Over the top Bale grab
Heavy duty over the top ‘elephant’ type bale
grab for handling all types of bales
EG-Contractor bale grab
Over sized bale grab for handling up to 3 large
square bales
Wear Parts Replace-able teeth, and castings including bolt
on teeth, Cat type teeth and MTG Kingmet
Cutting edges Available in various sizes from 16mm thick up
to 60mm
Bracket sets Conversion bracket sets for altering buckets
from one type of fitting to another
Nordic style buckets Nordic style buckets for using on Tilt Rotators
Both digging and grading buckets available for 2
to 30 ton machines
For over 35 years we have been manufacturing
buckets and attachments for the construction
and agricultural industries to our own design
and in our own UK based manufacturing
facilities
Excavator Services Ltd
Tel: 01283 815544 Fax: 01283 812961
Unit 315 Fauld Ind. Est. Nr Tutbury, Burton on Trent
Staffordshire DE13 9HS
Web Site: www.abiljo.ltd.uk Email: [email protected]
Digging buckets
Available for 750kg up to 90 ton weight
Excavators
Grading buckets
Available for 750kg up to 90 ton weight
excavators
Tilting Grading buckets
Available for 1.5 to 45 ton weight excavators
with either single or twin rams
Riddle/Shaker buckets
Available for 750kg to 60 ton weight
Excavators
Clay Spades
Available for 750kg to 15 ton weight
Excavators
V-trenching buckets
Available for 750kg to 45 ton weight
Excavators (built to suit requirements)
Narrow deep dig buckets
Available for 1.5 to 13 ton weight excavators
(various depths available to suit requirements)
Taper tile buckets
Available for 1.5 to 13 ton weight excavators
with flat or round noses.
Demolition/Armoured buckets
Available for 13 to 50 ton weight excavators
with stronger sides and top beam and extra wear
protection
Heavy Duty Rock buckets
Available for 13 to 90 ton weight excavators
built from the ground up to be stronger with
bigger teeth extra wear protection
Stone buckets
Available for 1.5 to 10 ton weight excavators
Reed Buckets
Available for 5 to 20 ton weight excavators
Grave digging buckets
Available for 1.5 to 6 ton weight excavators
Square hole buckets
Available for 1.5 to 8 ton weight excavators
Heavy Duty Rakes
Available for 1.5 to 40 ton weight excavators
Single tine ripper tooth
Available for 1.5 to 90 ton weight excavators
Spring Type Quick Hitch
Available for 750kg to 9 ton weight excavators
Wedge type manual Quick Hitch
Available for 10 to 50 ton weight excavators
Solid leg grapples
Available for 1.5 ton to 35 ton weight excavators
For light waste and scrap handling
Boxed leg demolition grapples
Available for 6 to 80 ton weight excavators for
general demolition and material handling
Boxed leg rock grapples Available for 6 to 80 ton weight excavators fro
heavy duty rock handling and placement
Clam type grapples
Available for 1.5 to 35 ton weight excavators for
general waste handling
Concrete Pulverisers
Available for 8 to 80 ton weight excavators
Mechanical Thumb
Available for 750kg to 28 ton weight excavators
Backfill blades
Available for 12 to45 ton weight excavators
Pallet Forks
Available for 6 to 45 ton weight excavators