scp+scpc the centrfugal pump system · the sensor modules, you may se-lect the following monitoring...

SCP+SCPCTHE CENTRFUGAL PUMP SYSTEM

CARdiAC SURGERY SoLUTioNS

The conceptThe Stöckert SCP contributes to meeting the globally increasing de-mand for centrifugal pumps used in extracorporeal perfusion.The concept of the integrated Cen-trifugal Pump System offers a ma-ximum degree of flexibility to the user of Stöckert heart-lung ma-chines of the new generation:

Space-saving: Thanks to its mast mounting system, the SCP does not take up any additional pump position on the console.

Easy installation: The SCP can be easily mounted and integrated into the system by means of its fast clamp connectors and its CAN-BUS System.

Simple retrofitting: The SCP is compatible with all S3/SC heart- lung machines.

Cost-effective: The SCP can be operated with all existing monitoring and control devices e.g., pressure control, level control and bubble detector.

SCP - THE INTEGRATED CENTRIFUGAL PUMP SYSTEM

2

SCP Systemcomplete, consists of:

SCP drive unitSCP pump control panel24 V connection cable for HLMStöckert Flow Sensor 3/8“ SCP emergency drive unit, complete

60-00-00

60-01-0060-02-1545-11-02

96-414-12060-01-50

Product designation Part number

Dimensions, Measurements and Operating conditionsSCP pump control panelWidth 180 mm (7.1 in.)Height 270 mm (10.6 in.)Depth 75 mm (3 in.) (without mast holder)Weight 3.5 kg (7.7 lbs.) (with mast holder)

SCP drive unitDiameter 96 mm (3.8 in.) (without mast holder)Height 135 mm (5.3 in.)Weight 3.0 kg (6.6 lbs.)

SCP emergency drive unitDiameter 100 mm (3.9 in.) (without mast holder)Height 250 mm (9.8 in.)Weight 4.5 kg (9.9 lbs.)Height hand crank 115 mm (4.5 in.)Diameter hand crank 26 mm (1 in.)

Operation conditionsOperating temperature +10°C (50°F) to +40°C (104°F)Storing temperature 0°C (32°F) to +40°C (104°F)Relative humidity 30% to 75%(Operation and storage)

All parameters relevant for per-fusion are set and displayed on the SCP Pump Control Panel. All control and monitoring functions e.g., level/bubble and pressure control used for extracorpore-al perfusion are displayed on the control panel. The integrated con-trol elements are additional safety features to the centrifugal pump. The electrical remote-controlled tubing clamp decreases the risk of air delivery. The pump control panel is fully integrated into the operation and control of the S3/SC System. As is the case with all components of the S3/SC Systems, communication goes via the CAN-BUS. In case of a total power fai-lure, the UPS of the S3/SC System takes over the power supply func-tion.

The flow controlled mode (Auto)Using the flow controlled mode (Auto), the set flow can be adjusted directly by turning the speed cont-rol knob. Due to the automatic ad-justment of the RPM, the set flow is kept at a constant level even if the systemic resistance and/or pres-sure changes during perfusion.

Electrical remote-controlled tubing clamp (optional)In case of alarm (e.g. level/bub-ble alarm or retrograde flow), the arterial line can be occluded in a fraction of a second by the electri-cally operated tubing clamp. The clamp may also be opened and closed manually via the respective keys on the pump control panel.

Low RPM LockoutThe integrated lockout prevents the pump speed from being reduced

SCP PUMP CONTROL PANEL

3

unintentionally below the preset limit. Speed below the Low RPM Limit can only be adjusted when disabling the lockout manually by pressing the “low-speed lockout release” key.

Integration into the systemBoth, the mast holder of the pump control panel and the 3-joint mast holder of the SCP drive unit are supplied with fast clamp connec-tors to facilitate mounting to the S3/SC System. You are free to mount the SCP System on the left or right side of the S3/SC System`s vertical masts.

SCP pump control panel 60-02-15


Technical data

Electrical data

Drip proof IPX2

Input voltage 24 V supply via HLM/SCPC SystemInput current 6 APower consumption max. 120 W

DisplaysRange of RPM display 0 to 3500 RPMResolution of the displayed actual value 1 RPMResolution of the adjusted set value 1 RPM

Measurement range: flow -10 to +10.0 LPMResolution of the 0.1 LPM < 0 LPM7-segment-flow-display 0.01 LPM > 0 LPMAccuracy of ±10% of the actual valuethe measured flow and/or ±0.1 LPM

Alarm limits of the displayed flowFlow too high 0.5 to +10.0 LPMFlow too low 0.0 to 5.0 LPMRetrograde flow 0.0 to 1.0 LPM

Pressure displayRange of display -99 to +999 mmHgResolution 1 mmHgAccuracy of the measured values ±5 mmHg

4

The SCP drive unit is delivered with a 3-joint mast holder with fast clamp connector and can be mounted with a great degree of flexibility.

The Revolution® centrifugal blood pump (CBP) is driven by a magne-tic coupling. The re-taining key at the pump head receptacle locks the Revolution® CBP into place and also acts as a protection against torsion during operation. The SCP drive unit is protected against overheating by a passive ventila- tion system.

SCP DRIVE UNIT

4

The total flow can be measured in-dependently and precisely by the Stöckert Flow Sensor thus ensu-ring an increase in safety during extracorporeal perfusion.

Flow sensors are clipped around the outside of standard PVC- tubing to provide non-invasive flow measurements.

The integrity of non-thrombo- genic surfaces is maintained.

The Stöckert Flow Sensor is in- tended for use with blood and saline solutions.

SCP FLOW SENSOR

Electrical data

Drip proof IPX2

Input voltage min.: 20 V DC nom.: 24 V DC max.: 32 V DC

Technical data

Range of speed 0 to 3500 RPMSpeed accuracy ±10 RPM

SCP drive unit 60-01-00


Technical data

Tubing size ID. 3/8 in. Bidirectional flow Resolution 5 ml/min Accuracy of the measured values Zero stability 12 ml/min Ultrasonic frequency 1.8 MHzWall thickness 3/32 in. OD. 9/16 in.Maximum flow 10 L/minSensitivity ±5 % Δ 15 ml/min

Stöckert Flow Sensor 3/8“ 96-414-120


5

The emergency drive unit enables you to complete the procedure by means of hand cranking. It is ope-rated by turning the hand crank clockwise. The hand crank turns freely in the opposite direction (anti-clockwise). The correspon-ding pump speed is displayed on the LEDs of the emergency drive unit.

The retaining key at the pump head receptacle locks the Revolu-tion® CBP into place and acts as a protection against torsion during opertion.

The holder with clamping screw facilitates the mounting of the emergency drive unit to the mast system of the S3/SC and SCPC System.

SCP EMERGENCY DRIVE UNIT

5

Technical data

Speed display 7 LEDsResolution 500 RPM per LED (starting at 1000 RPM)Displayed range of speed 1000 to 4000 RPMAccuracy ±250 RPM

Emergency drive unit, complete 60-01-50


6

The Revolution® centrifugal blood pump utilizes a rotating, vaned im-peller design to move blood by cen-trifugal force. The pump is inten-ded for use only with the Stöckert SCP System in cardiopulmonary bypass procedures for periods of up to six hours.

REVOLUTION® CENTRIFUGAL bLOOD PUMP

6

Specifications

Priming volume 57 mlMaximum flow rate 8 lpmMaximum outlet pressure 800 mmHgInlet/outlet connector 3/8 in. (9.5 mm)

7

The Stöckert Centrifugal Pump Console (SCPC) has been designed according to the latest state-of-the-art technology to fully meet our customers` highly specialized demands.The Stöckert Centrifugal Pump Console (SCPC) combined with the Stöckert Centrifugal Pump System (SCP) comprises an independent centrifugal pump system:

The SCPC can be operated as a stand-alone system.

The SCPC may, of course, be easily integrated into all heart- lung-machines currently pre- sent on the market.

In case of a power failure, the system`s integrated uninterrup- tible power supply (UPS) takes over the entire power supply for a duration of 90 minutes. The battery capacity is displayed both, in percent and as a bar graph display.

All settings, the operation and the configuration of the monitoring functions can be effected on the SCPC`s touchscreen.

The SCPC System enables you to configure the system according to your individual requirements.

All relevant data can be regis- tered and recorded via the Stö- ckert Data Management System (DMS).

The SCPC System features an integrated display of the date and time as well as.

2 independent timers with read- outs in hours/minutes/seconds.

SCP + SCPC – THE CENTRIFUGAL PUMP SYSTEM

7

SCPC Systemcomplete, consists of:Power cablePotential equalization cable (5 m) Sensor module pressure controlSensor module temperature monitororSCPC Systemcomplete, consists of:Power cablePotential equalization cable (5 m) Sensor module pressure controlSensor module level/bubbleLevel sensorBubble sensor 3/8“ 3-joint mast holderwith fast clamp connector

60-03-00

96-403-50X45-10-5022-10-2020-20-20

60-03-75

96-403-50X45-10-5022-10-2023-30-2023-27-4023-07-50

23-26-96


Dimensions, Measurements and Operating conditionsSCPC SystemWidth 180 mm (7.1 in.)Height 365 mm (14.4 in.) (with grip)Depth 423 mm (16.7 in.)Weight 20 kg (44 lbs.)

Operating conditionsOperating temperature +10°C (50°F) to +40°C (104°F)Storing temperature 0°C (32°F) to +40°C (104°F)Relative humidity 30% to 75%(Operation and storage)

8

Dependent on the configuration of the sensor modules, you may se-lect the following monitoring func-tions:

Pressure Control 2 pressure channels with alarm limits for channel 1 and 2 or 1 pressure channel with alarm limits and flow display

Temperature Monitor and Level/Bubble Control 4 temperature channels with alarm limits for channel 1 or Level/Bubble Control

SCPC SYSTEM CONFIGURATION

8

System menu

Main menu

Electrical data

SCPC SystemDrip proof IPX2

Input voltage 120 V~, 50/60 Hz (according to UL approval) (100 V~, 110 V~, 115 V~, 127 V~, 220 V~, 230 V~, 240 V~; 50/60 Hz) Input power 1.0 A (230/240 V)Power consumption max. 220 WMains fuse Automatic circuit breaker(implemented in mains 2.0 A nominal release current 120 Vpower switch 1.0 A nominal release current 230 V

Output VoltageNominal output voltage 24 V (2x12 V)Min. output voltage 20 V (2x10 V)Max. output voltage 32 V

Output PowerNominal output power 100 WCapacity of new accumulators 7 AhFuse protection 10 A slow-blowof accumulators

Operating time of UPSAt 100 W output power 90 minutesCharging time 20 hours max.

Sensor Module Pressure ControlOperating voltages +5 V, ± 12 VPower consumption 3 WOutput voltage to pressure transducer < 10 VInput resistance 100 kΩ

Sensor Module Temperature MonitorOperating voltages +5 V, ± 12 VPower consumption 3 WTemperature measurement range 0°C (32°F) to +50°C (122°F)Resolution 0.1 °CAccuracy ± 0.2°C

45-04-0345-04-1545-04-1645-04-17

45-03-1045-03-1145-03-30

Accessories (optional) Part numberMedex MX960 pressure transducerMedex MX960 pressure transducer cableMedex MX960 holder for 1 pressure transducerMedex MX960 mounting plate for 2 pressure transducersTemperature probes for direct measurements in oxygenators:for Cobe oxygenatorsfor Dideco oxygenatorsfor Medtronic oxygenators

The conceptEase of use and safety in centrifu-gal perfusion technology

The electrical remote-controlled tubing clamp, designed for opera-tion with the SCP System, demons-trates clear evidence for feasible improvements in ease of use and safety of centrifugal perfusion technology.It has been especially developed according to latest state-of-the-art technology taking a high degree of flexibility and ergonomic standards for our users´requirements into consideration.

The result is a concept offering additional protection against air delivery during centrifugal blood pumping.

In case of alarms (e.g. level bub-ble alarm or retrograde flow), the electrical remote-controlled tu-bing clamp occludes the arterial line within fractions of a second thus reducing the danger of air delivery to a minimum.

Furthermore, the clamp can also be opened and closed manually at any time by pressing the respec-tive key at the SCP pump control panel.

9

THE ELECTRICAL REMOTE-CONTROLLED TUbING-CLAMP

9

Electrical Remote-Controlled Tubing Clampconsists of: Tubing clamp with 3-joint mast holder (500 mm), fast clamp connector and 24 V connection cable

Electrical Remote-Controlled Tubing Clampconsists of: Tubing clamp with 3-joint mast holder (620 mm), fast clamp connector and 24 V connection cable


60-05-00

60-05-40

10

Advantages of the product

Unique safety concept featuring innovative protection measures against air delivery during centrifugal blood pumping

Automatic clamping of the ateri- al line in case of level/bubble alarm or retrograde flow

Allows clamping of the arterial line within fractions of a second

“Quick release“ function for the inserted tubing by simply ope- ning the lock at the clamping head flap

2 keys located at the SCP pump control panel make the operation a model of ease of use and user-friendliness

Option to open/close the clamp manually via the respective keys at the SCP pump control panel

Maximum ease of use for starting and stopping extracorporeal perfusion

“State-of-the-art“-communication via the CAN-BUS System

24 V-powered by the S3/SC/SCPC Systems incorporating UPS functions in case of a power failure

Optimal positioning of the clamp by means of a 3-joint mast holder with fast clamp connector

Suitable for standard 3/8“ x 3/32“ PVC-tubings

THE ELECTRICAL REMOTE-CONTROLLED TUbING CLAMP

10

Electrical data

Drip proof IPX2

Input voltage 24 V supply via HLM/SCPC SystemInput current 1.5 APower consumption max. 36 W

Technical data

Dimensions and WeightLength 236 mm (9.3 in.)Width 66 mm (2.6 in.)Height 71 mm (2.8 in.)Weight with holder 3 kg (6.6 lbs.)

Operating conditionsOperating temperature +10°C (50°F) to +40°C (104°F)Storing temperature 0°C (32°F) to +40°C (104°F)Relative humidity 30% to 75%(Operation and storage)

11

SCPC TrolleyThe trolley`s unique design is a milestone in meeting the users` expectations of a flexible and mo-bile cardiopulmonary bypass sys-tem. The SCPC is securely seated in the trolley`s solid, stainless steel con-sole.Four easily steerable casters guarantee its excellent manoeuvrabi-lity. In addition, the height of the trolley`s push grip can be adjusted as desired to facilitate transporta-tion. For mounting the accessories, the SCPC trolley features a vertical mast and a telescope mast with rotatable infusion rack.The SCP pump control panel and the drive unit, the electrical remo-te-controlled tubing clamp as well as other accessories or dispos- ables may be mounted to the mast system.

SCPC Adapter PlatesIn order to guarantee the safe ope-ration of the SCPC system with various heart-lung machines, we offer the corresponding adapter plates.

SCPC ACCESSORIES

11

Dimensions and Weight

SCPC TrolleyWidth 425 mm (16.7 in.) (with push grip)Height 165 mm (6.5 in.)Depth 609 mm (23.8 in.)Weight 21.5 kg (47.4 lbs.)

SCPC Trolleycomplete, consists of:Movable console1 telescope mast with infusion rack1 vertical mast1 push grip2 mast connectors for push grip

60-04-00

60-04-1060-04-3060-04-2560-04-4660-04-40


Adapter plate S3 SystemAdapter plate CapsAdapter plate Cobe CenturyAdapter plate Sarns 8000

60-03-5060-03-5560-03-6060-03-65


Sorin Group Deutschland GmbH Lindberghstr. 25D-80939 München T.: +49(0)89 323.01.0F.: +49(0)89 323.01.555

© 2013 Sorin Group | KA-5021-0002-02 ENG | Order no. 45-90-15 ENG

scp+scpc the centrfugal pump system · the sensor modules, you may se-lect the following monitoring...

Documents