scopecontrol 2 pg brochure 7015-76

2
The only fully automated rigid endoscope testing system that ensures your scopes are an exact match to manufacturer designs and ready for OR use. Scope Control uses measurements that are taken from new, unused scopes in six key performance areas. The system then measures your scopes against the measurements from a new scope and provides a simple pass or fail rating on each scope in less than 3 minutes. Angle of View The angle of view on the distal tip of the scope is tested against the reference created from a new scope. Light Fibers The light fibers that transmit light to the distal tip are tested for brightness and light emission. Field of View The field of view is measured in degrees and represents the visible range of the scope. Light Transmission The ability of the scope’s optic train to return a bright image to the eyepiece of the scope. Focus The focus of the scope is measured against the reference measure taken from a new and unused scope. Color Correctness The accuracy of the colors that are displayed through the scope is tested against the baseline measures from a new and unused scope. Easy to Learn Fast to Use 100% Accuracy 333 Water Avenue Bellefontaine, OH 43311 937-592-5025 / 800-722-3675

Upload: kelly-klink

Post on 14-Apr-2017

13 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: ScopeControl 2 pg brochure 7015-76

The only fully automated rigid endoscope testing system that ensures your scopes are an exact match to

manufacturer designs and ready for OR use.Scope Control uses measurements that are taken from new, unused scopes in six key

performance areas. The system then measures your scopes against the measurements from a new scope and provides a simple pass or fail rating on each scope in less than 3 minutes.

Angle of ViewThe angle of view on the distal tip of the scope is tested against the reference created from a new scope.

Light FibersThe light fibers that transmit light to the distal tip are tested for brightness and light emission.

Field of ViewThe field of view is measured in degrees and represents the visible range of the scope.

Light TransmissionThe ability of the scope’s optic train to return a bright image to the eyepiece of the scope.

FocusThe focus of the scope is measured against the reference measure taken from a new and unused scope.

Color CorrectnessThe accuracy of the colors that are displayed through the scope is tested against the baseline measures from a new and unused scope.

Easy to Learn • Fast to Use • 100% Accuracy

333 Water AvenueBellefontaine, OH 43311

937-592-5025 / 800-722-3675

Page 2: ScopeControl 2 pg brochure 7015-76

What Will ScopeControl® Do For Me?

How Does ScopeControl® Work?

For More InformationContact your local Mobile Instrument Service and Repair Representative or our National office at

1 • 800 • 722 • 3675

• Improve patient safety and OR outcomes• Eliminate OR complaints by pre-testing every scope before use• Reduced delays in OR due to malfunctioning scopes• Efficient, quantifiable test results that eliminate guesswork• Track inventory and scope performance over time• Identify minor issues before they become major repairs

Testing in Two Easy Steps:1. Place the scope inside the testing unit

and close the lid.2. Use the touch screen to select the make

and model of scope and input the serial number if this is the first time testing.

In 1-3 minutes, the system will produce a simple PASS/FAIL result from the test.

Test results automatically saved and backed up. Print test results or reports anytime.View a Demo of the System online at https://www.youtube.com/watch?v=2941NktEq6s

333 WATER AVE. BELLEFONTAINE, OHIO 43311 • WWW.MOBILEINSTRUMENT.COM