ST1810

NOTE: Dimensions shown in millimeters. Turn dimensions shown are based on standardvehicle configuration. Dimensions will vary with bucket widths. Vertical dimensions arebased on an unloaded vehicle with a tire radius of 985 mm. (32 mm deflection)

17.517.5 T TONNE CAPACITY SCOONNE CAPACITY SCOOPTRAMPTRAM LHDLHD t e c h n i c a l s p e c i f i c a t i o n s a n d p e r f o r m a n c e d a t a

Atlas Copco Wagner Inc.

B

C

E

D

A

F

4585

4924

2080

2083

3648

11607

2080

2000 X 45 CHAMFER

1634

2840

562

40

2869

5

78743792

4585

4924

R 101615

42.5

3

CAPACITY SAEkg (lbs)

Tramming Capacity 17500 (38,600)Static Tipping Capacity 41000 (90,200)Break-Out Force, Hydraulic 31360 (69,000)Break-Out Force, Mechanical 29372 (64,618)

VEHICLE SPEEDSSee Vehicle Grade Performance Chart

ENGINEDetroit Diesel (4-Cycle) Series 60 DDEC MSHA Power Rating @ 2,100 rpm 317 kW (425 hp)Maximum Torque @ 1,200 rpm 2000 Nm (1,425 ft. lbs.) Number of Cylinders 6 In LineDisplacement 12.7 L (518 in3)Cooling WaterMSHA Part 7 Ventilation

Vent Rate 741m3/min (26,000 cfm)Particulate Index 795m3/min (27,900 cfm)

EXHAUST SYSTEMExhaust Conditioner Silencer & Purifier

ELECTRICAL SYSTEMSystem Voltage 24 Volt Starting, 24 Volt Accessories

TRANSMISSION/CONVERTERAutomatic Power Shift with Integral Converter,Modulated 4-Speed Shifting, Modulated Forward/Reverse Spicer, Series 40,000

AXLESSpiral Bevel Differential, Full Floating, PlanetaryWheel End Drive Wagner, Rock Tough Series 595

BRAKESService SAHR

Spring-Applied, Hydraulically Released; Fully Enclosed,Force Cooled Multiple Wet Discs at Each Wheel End

Parking and Emergency SAHR

TIRESTubeless, Nylon, Smooth Tread Design for UndergroundMine ServiceTire Size, Front & Rear 29.5 R x 29, L-5S

STEERINGArticulated Hydraulic Power Steering, Pilot-Operated,Mono-Stick ControlTurning Angle 85 (42.5 Each Way)System Pressure 20.7 MPa (3,000 psi)

HYDRAULIC SYSTEMDump and Hoist Control Pilot Operated, JoystickCylinders Double Acting, Chrome-Plated StemsCylinder Diameter

Steer Cylinders (2) 160 mm (6.3 in)Hoist Cylinders (2) 241 mm (9.5 in)Stabilizer Cylinder (1) 305 mm (12.0 in)

Pumps Heavy Duty Gear TypeFiltration Return Line: 4 MicronDump/Hoist System Pressure 20.7 MPa (3,000 psi)

TANK CAPACITIESliters (gallons)

Fuel 504 (133)Hydraulic 356 (94)

OSCILLATIONRear Axle, Trunnion Mounted, Self-Lubricating BushingsDegree of Oscillation Total of 16 (8 Each Side)

OPERATORS ARRANGEMENTSide Seated Operator for Bi-Directional Operation & Maximum Visibility, MSHA/ROPS/FOPS Cabin or Canopy with Integrated Rib Roll

OPERATING WEIGHT (Approximate)kg (lbs)

Empty 52345 (115,400)(Depending on Configuration)

Fully Loaded 69845 (154,000)

ST1810

ST1810

NOTE: 3% rolling resistance assumed. Actual performance may vary depending on the application.

DETROIT SERIES 60 317 kW (425 hp) Loaded

Percent 1st Gear 2nd Gear 3rd Gear 4th GearGrade Grade kph mph kph mph kph mph kph mph0.0% 4.5 2.8 8.6 5.7 14.3 8.9 22.8 14.22.0% 4.3 2.7 8.2 5.1 13.1 8.2 15.6 9.74.0% 4.2 2.6 7.8 4.9 11.2 7.06.0% 4.1 2.6 7.4 4.6 8.6 5.38.3% 1 : 12 4.0 2.5 6.8 4.210.0% 1 : 10 4.0 2.5 5.1 3.812.5% 1 : 8 3.8 2.4 5.0 3.114.3% 1 : 7 3.8 2.3 4.3 2.716.0% 3.7 2.318.0% 3.5 2.220.0% 1 : 5 3.3 2.125.0% 2.8 1.830.0% 2.3 1.4

DETROIT SERIES 60 317 kW (425 hp) Empty

Percent 1st Gear 2nd Gear 3rd Gear 4th GearGrade Grade kph mph kph mph kph mph kph mph0.0% 4.6 2.9 8.8 5.5 14.8 9.2 24.5 15.22.0% 4.5 2.8 8.5 5.3 14.0 8.7 21.6 13.44.0% 4.4 2.7 8.2 5.1 13.3 8.2 16.9 10.26.0% 4.3 2.7 8.0 5.0 12.1 7.68.3% 1 : 12 4.2 2.6 7.7 4.8 10.2 6.410.0% 1 : 10 4.1 2.6 7.5 4.6 8.7 5.412.5% 1 : 8 4.1 2.5 7.0 4.314.3% 1 : 7 4.0 2.5 6.6 4.116.0% 4.0 2.5 6.1 3.818.0% 3.9 2.4 5.5 3.420.0% 1 : 5 3.8 2.4 4.9 3.125.0% 3.7 2.330.0% 3.4 2.1

ST1810

MATERIAL DENSITYtonnes/m3 1.8 2.0 2.2 2.4 2.6 2.8 3.0

lbs/yd3 3035 3372 3709 4046 4384 4721 5058STANDARD BUCKETSBucket Volume (Nominal Heaped) m3 9.5 8.8 8.0 7.3 6.7 6.3 5.8

yd3 12.0 11.4 10.4 9.5 8.8 8.2 7.6Bucket Width (A) mm 3450 3250 3250 3250 3250 3250 3250

inches 136 128 128 128 128 128 128TRAM POSITIONAxle Centerline to Bucket Tip (B) mm 3868 3799 3682 3630 3578 3525 3473Ground to Bucket Tip (C) mm 2430 2339 2197 2117 2048 1979 1910

RAISED POSITIONSBack Height (D) mm 6583 6583 6583 6583 6583 6583 658340 Dump AngleReach (F) mm 1719 1598 1477 1437 1396 1355 1315Bucket Tip Height (E) mm 2598 2724 2836 2845 2915 2986 3056

30 Dump AngleReach (F) mm 2059 1923 1787 1651 1596 1540 1485Bucket Tip Height (E) mm 2925 2997 3069 3141 3190 3241 3290

08/01 Printed in USA CG-2500 PN 5566 0158 02

STD

NOTE: Full dump angle is 42

The

face

of i

nter

act

ion

Atlas Copco Wagner Inc.Working Harder and Smarter

P.O. Box 20307 Portland, Oregon 97294-0307 USA Telephone (503) 255-2863 Facsimile (503) 251-30142001 Atlas Copco Wagner Inc. SAHR, Rock Tough, Teletram, E-O-D, Scooptram , Scoopy, and Strongback are registered trademarks of Atlas CopcoWagner Inc. Atlas Copco is a registered trademark of Atlas Copco AB and is used with permission. Other brands and symbols aretrademarks of their respective companies. We reserve the right to change specifications and designs at anytime without prior notice.For further information: Contact Atlas Copco Wagner Inc. at our web site: www.atlascopcowagner.com.Visit Atlas Copcos web site at: www.atlascopco.com