science & technology council summer camp. “imagination is more important than knowledge” -...
TRANSCRIPT
Science & Technology CouncilSummer Camp
“Imagination is more important than Knowledge”
- Einstein
Give Wings to Imagination…
ACTIVITIES
Lectures and workshops on balsa glider, boomerang and water rocket
Moments from the semester
Earlier Projects …
• RC planes with different special features or any other type of RC Aeromodels are taken as summer projects.
• Three projects were successfully completed during summer 2009.
• The projects were Bi-fuselage RC plane, Rogallo wing RC plane and Retractable wing RC plane.
SUMMER PROJECTS
This project dealt with fabricating an
unconventional Aero model design.
Model can be seen in fig.
Motivation for this project came from Snitch. Team Members :
Mayank
Puneet Kujur
Shashank Tripathi
Kamlesh Meena
Pukhraj Sharma
Bi fuselage
Rogallo Wing RC-Plane
Team Members :
• Tushar Sikroria• Nikhil Upadhye• Amit Kumar Gond • Mayank Sharma
• The project was inspired from parachutes.
• To provide large lifting force, we decided to replace normal wing by a special kind of wing made of parachute cloth.
• This model can be a basis of planes used in applications involving short runway.
INSPIRATION
• Rogallo-wing is a delta-shaped wing which provides large lift to the fuselage.
• This wing is made of any suitable fabric like parachute cloth, miler sheet or even plastic. In this project parachute cloth has been used.
• The cloth is supported by four rods and the sag given to the cloth gives lift.
DETAILS
Retractable Wing RC-Plane
TEAM MEMBERS :
• Ankita Mittal• Jeetesh Agrawal• Kratika Agrawal• Prateek Sazawal• Ravindra Dhama• Vikas Rana
A simple Remote Controlled Plane.
Special Feature:
• Outer parts of the wing can be Folded.
• The Fuselage has good strength although it’s weight is kept minimum.
INTRODUCTION
Can be used both as a car and an airplane.
Can serve as a cheaper version of a plane car.
INSPIRATION
Retractable Wing RC Plane
We worked on 4 semester projects.
The projects are RC Helicopter
RC Ornithopter
Completely foldable wing RC plane
Quad rotor autonomous aerial vehicle.
SEMESTER PROJECTS
Quad Rotor Autonomous Aerial Vehicle
TEAM MEMBERS :
Jeetesh
Ankur (Robo Club)
This is something which we PLAN to make
(By EPFL, Switzerland)
TEAM MEMBERS :
Atul
Kratika
Tushar
HELICOPTER
• We aimed to make a remote controlled helicopter.
• This was inspired from the real world problem, on which major defense companies are working.
AIM
This project deals with the designing and fabrication of flapping wing Aero-model.
Studied, decided dimension.
Future Plan: Continued under Prof. D. Das
RC ORNITHOPTER
This project deal with converting half foldable wing to completely foldable wing Aero-model
Inspiration: Terraffugia
Work: Mechanism has been decided and it will be tried on old wings.
COMPLETE FOLDABLE WING
SUMMER 2010
• We expect you to come up with some good and innovative ideas for summers.
• One of the projects will be based on the problem statement of Zephyr (IIT Bombay), 2010.
• A lecture series on RC Planes will be held in the beginning of summers.
• The other projects planned for the summers are following ….
1. RC Ornithopter
2. Amphibian Plane
3. Delta Wing RC Plane
Aeromodelling Club ha launched.
Visit -http://students.iitk.ac.in/aeromodelling/
Detailed presentation of all the projects is available on the site.
This presentation will be uploaded on the site
CLUB WEBSITE
JEETESH AGRAWAL – jeetesh@
9795669413
KRATIKA AGRAWAL – kratika@
9616354932
TUSHAR SIKRORIA – sikroria@
9450683065
CONTACTS