science skills. chapter two: science skills 2.1 mass and volume 2.2 density 2.3 graphing 2.4...
TRANSCRIPT
SCIENCE SKILLS
Chapter Two: Science Skills
2.1 Mass and Volume
2.2 Density
2.3 Graphing
2.4 Solving Problems
Section 2.1 Learning Goals
Explain the meaning of mass and describe the units for measuring mass.
Distinguish between mass and weight.
Define volume and explain how the volume of matter is measured.
Investigation 2A
Key Question: How do you measure mass and volume?
Measuring Mass and Volume
2.1 Measuring massMass describes the
amount of matter in an object.
The SI unit for mass is the kilogram (kg).
The kilogram is too large a unit to be convenient for small masses.
One gram (g) is one-thousandth of a kilogram.What is the estimated mass of ONE zinc nut?
2.1 MatterMatter is anything
that has mass and takes up space.
All matter has mass.
Steel, plastic, rubber, and glass are different kinds of matter.
A car has a lot more of each kind of matter than a bike.
2.1 Mass and weight are different We tend to use the terms mass
and weight interchangeably, but they are not the same thing.
Mass is the amount of matter in an object.
Weight is a measure of the pulling force of gravity on an object.
2.1 Mass and weight are different A 2.3 kg bag of
flour has a mass of 2.3 kilograms no matter where it is in the universe.
The weight of the bag of flour is less on the moon.
The 5 lb bag of flour on Earth weighs only .8 lbs on the moon!
2.1 VolumeVolume is the amount of space an
object takes up.
The fundamental unit of volume in SI is the cubic meter (m3).
More convenient smaller units are cubic centimeters (cc or cm3), liters (L) and milliliters (mL).
2.1 VolumeMeasuring the volume of liquids is easy.
Pour the liquid into a graduated cylinder and read the meniscus at eye level.
2.1 DisplacementYou can find the
volume of an irregular shape using a technique called displacement.
Put the irregularly shaped object in water and measuring the amount of water displaced.
2.1 Comparing mass and volumeMass and volume are two different properties of matter.
Size does not always indicate an object’s mass!
How the matter is packed into space is more important.
Chapter Two: Science Skills
2.1 Mass and Volume
2.2 Density
2.3 Graphing
2.4 Solving Problems
Section 2.2 Learning Goals
Define density in terms of mass and volume.
Identify units used to express the density of materials.
Apply the density formula to solve problems.
Investigation 2B
Key Question: How is an object’s density
related to its volume, mass, and tendency to sink or float?
Density
2.2 DensityDensity describes how much mass is in a given volume of a material.
2.2 Density
Solids, liquids and gases are matter, so they all have density.
The density of water is about one gram per cubic centimeter.
2.2 DensityThe units used
for density depend on whether the substance is solid or liquid. For liquids use
units of grams per milliliter (g/mL)
For solids use density in units of g/cm3 or kg/m3.
2.2 Density of common materialsDensity is a property of material
independent of quantity or shape.
2.2 Density of common materials
Liquids tend to be less dense than solids of the same material. Ex. solder
(“sodder)
2.2 Density of common materials
Water is an exception to this rule. The density of solid water (ice) is less than the density of liquid water.
2.2 Determining Density To find the density of a
material, you need to know the mass and volume of a solid sample of the material.
1. Mass is measured with a balance or scale.
2. Use the displacement method or calculate the volume.
2.2 DensityDensity changes for different substances
because:1. Atoms have different masses.2. Atoms may be “packed” tightly or loosely.
Calculating Density1. Looking for: …the density of the candle
2. Given: …mass = 1500 g; volume = 1700 mL
3. Relationship: D = m/V
# Sig. fig = .88 g/mL
Solving Problems
4. Solution: 1,500 g ÷ 1,700 mL = 0.8823529 g/mL
Chapter Two: Science Skills
2.1 Mass and Volume
2.2 Density
2.3 Graphing
2.4 Solving Problems
Section 2.3 Learning Goals
Use graphs to create a visual representation of data.
Analyze trends on a graph.
Explain the difference between a direct relationship and an inverse relationship.
Investigation 2C
Key Question: What is the thickness of
aluminum foil?
Thickness of Aluminum Foil
2.3 Graphing A graph is a visual way to
organize data.
A scatterplot or XY graph is used to see if two variables are related.
2.3 Graphing
A bar graph compares data grouped by a name or category.
2.3 Graphing A pie graph
shows the amount each part makes of up of the whole (100%).
2.3 Graphing A “connect-the-dots” line graph
is often used to show trends in data over time.
2.3 How to make an XY graphScatterplots show how a change in one
variable influences another variable.
The independent variable is the variable you believe might influence another variable.
The dependent variable is the variable that you hope will change as a result of the experiment.
2.3 How to make an XY graphPressure is critical to safe diving.
How does an increase in depth affect the pressure?
What sort of graph would best show the relationship between pressure and depth?
2.3 How to make an XY graph
1. Choose x and y-axis Depth is the independent variable = x axis Pressure is the dependent variable = y
axis2. Make a scale Most graphs use ones, twos, fives or tens OR calculate the value per box
3. Plot your data 4. Create a title* Exception- when time is a variable
2.3 Identifying graph relationshipsIn a direct
relationship, when one variable increases, so does the other.The speed and distance variables show a direct relationship.
2.3 Identifying graph relationships
When there is no relationship the graph looks like a collection of dots.
No pattern appears.
2.3 Identifying graph relationshipsIn an
inverse relationship, when one variable increases, the other decreases.
2.3 Reading a graphWhat is the speed of the car at 50 cm?
1. Find the known value on the x axis Position = 50 cm
2. Draw a line vertically upward from 50 cm until it hits the curve.
3. Draw a line across horizontally to the y-axis from the same place on the curve.
4. Read the speed using the y axis scale. Speed = 76 cm/s
Chapter Two: Science Skills
2.1 Mass and Volume
2.2 Density
2.3 Graphing
2.4 Solving Problems
Section 2.4 Learning Goals
Apply a four-step technique to solve problems.
Use the design cycle to solve problems.
2.4 Solving Problems
Calculate marble’s volume & density1. Looking for:
volume, then density2. Givens:
mass = 6 g , water displaced 30 to 32 mL3. Relationships:
water displaced = marble volume, D = m/V4. Solution:
32 mL – 30 mL = 2 mL D = 6 g / 2 mL
= 3 g/mL
Solving Problems
2.4 How to solve design problemsUse what you know to design a
solution that solves the problem.
Unlike “formula problems,” design problems have many correct solutions.
The solutions are only limited by your creativity, ingenuity, skill, and patience.
2.4 How to solve design problemsWhat does your
design need to accomplish?
What constraints do you have?
Think of an idea.
Follow the design cycle…
Density and Ocean CurrentsDid you know that there are
underwater waterfalls in the ocean? While it may seem strange for water to
fall through water, it really happens due to density differences in ocean water coming from different sources.