science impact of sensor effects or how well do we need to understand our ccds? tony tyson
TRANSCRIPT
Correcting PSF systematicsThe shape of the PSF must be known (measureable and stable) to a part per ten thousand in each exposure at each position in the CCD. Software corrections to its effects on faint galaxies will be made: below are the shear-shear correlation residuals in a simulation of LSST observing.
CCD systematics must be controlled
at this level
The Problem
• Imaging data from fields are not independent!• The same CCD systematics pattern is
imprinted on the sky for each dithered field• Thus CCD systematic errors in shear-shear
correlation do not average down over many fields
• Must reach full survey systematics specs in each ~100 visit dithered field!
CCD additive shear systematic
astrometric bias due to charge transport anomalies around edges of device and at bloom stop.
What if we don’t correct for systematics?Simulated LSST survey with only CCD effects on
k (mass overdensity) map made from residual CCD shear systematics, in dithered and rotated observations.
CCD multiplicative shear systematic and one more additive systematic
• Stars in the field are used as PSF calibrators• Brighter-fatter effect causes a PSF error
• Isotropic BF effect
• Anisotropic BF effect fixed in CCD coords!
BF effect depends on star-sky contrast!
Electrostatic model BF effect
Craig Lage
Calibrate model to 3E-3 for isotropic BF, and 3E-4 for anisotropic BF
Multi step CCD systematics calibration
• Use everything we know about these CCDs from lab measurements
• Develop physics-based model for charge transport effects
• Model astrometric bias and correct it in processing; then drop 2 lines and columns
• Rely on >20,000 stars per exposure from LSST operations to update and fine tune
Meeting the BF shear precision goal
The raw uncorrected BF bias in the PSF FWHM is 1-2%. Lab measurements will tell us how to correct for that as a function of star intensity, wavelength, seeing, voltages. We could do that to better than 1% precision. This in itself could meet the 3E-3 & 3E-4 goals. Moreover, each exposure will have >20,000 stars in the focal plane which will be in the linear BF region. The lab derived model could then be fit to these stars as a way of further improving the correction for the PSF bias.
Required lab precisionTo develop physics-based model for charge transport effects: • Subpixel dithered spot array data 0.1 micron resolution vs x, y, voltages and l
• f/1.2 typical seeing dithered star array data 0.1 micron resolution vs x, y, voltages and l -> Derivative of astrometric bias to 3E-4 shear
• Validate on new f/1.2 lab data from complex masks
Characterization priorities in 2016
• Sub-pixel studies vs position, voltages…• Study CCD effects vs sky background• All vs wavelength • Develop models of charge transport• Null tests; confirm removal of PSF systematics• Undertake lab simulated observing• Can we measure the science signals?• What is the residual error and B mode?
DETF FoM(t) during ten year survey
LSST FoM > 800
FoM = 112011 Stage II
DETF Stage IV FoM = 110
DETF Stage IV = 10x Stage II
Shear signal and noise spectraGalaxy ellipticity shot noise and cosmic variance combine to give a roughly constant noise floor at ~3E-7 over useful scales
Reduced sensitivity to systematic error
Combining WL and BAO breaks degeneracies.Joint analysis of WL & BAO is far less affected by systematics.
p/ r = w0 + wa (1-a)