SchmartBoardThe World’s Easiest

Surface Mount Prototyping System

Issues

• Most prototyping boards are too large

• Most through hole prototyping boards require a lot of jumpers

• Few people can hand solder Surface Mount components

SCHMARTBOARD SOLUTION Most prototyping boards are too large

• Small boards to save space.

• Boards connect together using SchmartBoard’s patented technology.

• Once can also add populated modules

SCHMARTBOARD SOLUTION Most prototyping boards require a lot of jumpers

• SchmartBoard’s are all pre-traced to minimize the need for jumpers on each individual board.

SCHMARTBOARD SOLUTION Few can hand solder Surface Mount components

• SchmartBoard’s “EZ” technology makes it easy for anyone to hand solder surface mount components. No experience is necessary to hand solder even a .4mm pitched IC.

SchmartBoard TypesThrough Hole

• SchmartBoard makes through pre-traced through hole boards.

• SchmartSolder makes soldering through hole simple for even the novice

SchmartBoard TypesSOP/SOIC

• .5mm to 1.27mm pitches

• Supports all versions of SOIC (ie SO, SOP, QSOP, SSOP, TSSOP, PSSOP)

• Grounded to a copper plane

SchmartBoard TypesQFP

• .4mm to .8mm Pitch• Supports all

versions of QFP(ie QFP, TQFP, PQFP )

• Grounded to a copper plane

• Access to component ground pad

SchmartBoard TypesQFN

• Assorted package sizes and pitches

• Grounded to a copper plane

• Access to component ground pad

SchmartBoard TypesBGA

• 1.0 and 1.27mm Pitch

• Up to 400 Balls

• Copper Ground Plane

SchmartBoard TypesPopulated Modules

• I/O

• Power

• Modules connect to other SchmartBoards

• More To Come

SchmartBoard TypesDevelopment Boards

• Processor Development Boards

• Microchip PIC

• Parallax Propeller

• More to Come

Solder By Numbers

• Design, Save and Share SchmartBoard Circuits Online

• Social Networking

for electronics