scheme & syllabus for v and vi semesters b.e...
TRANSCRIPT
Scheme & Syllabus for V and VI semesters
B.E. – Instrumentation Technology
2015-16
V Semester
Course
Code
Course Title L T P C
IT501 Microcontrollers 3 1 0 4
IT502 Digital Signal Processing 3 1 0 4
IT503 Biomedical Instrumentation 4 0 0 4
IT504 Control systems 3 1 0 4
IT505 Data Converters and virtual Instrumentation 4 0 0 4
IT506 Process Instrumentation-II 3 0 0 3
IT507 Microprocessor lab 0 0 3 1.5
IT508 Control systems lab 0 0 3 1.5
HS005 Constitution of India and Professional Ethics(Audit
Course)
2 0 0 0
Total Credits 26
VI Semester
Course
Code
Course Title L T P C
IT601 Analytical Instrumentation 4 0 0 4
IT602 Embedded System Design 3 1 0 4
IT603 Process control 3 1 0 4
IT604 Advanced Control Systems 4 0 0 4
IT605 Microcontroller Lab 0 0 3 1.5
IT606 Data Acquisition and Virtual Instrumentation lab 0 0 3 1.5
IT607 Mini Project (Self Learning Component) 0 0 3 1.5
IT6XX
IT6XX
Elective I
Elective II
3
3
-
-
0
0
3
3
HS004 Communication Skill-2 (Summer Term Course) 0 0 2 1
HS006 Environmental Science(Audit Course) 0 0 2 0
Total Credits 27.5
Electives:
IT651-Computer Networks IT652 –Object Oriented Programming IT653 - Communication systems IT654 - Computer Organization
IT655 - Digital Image Processing
IT656 -Applied Numerical Methods
IT657-Concepts of Operating Systems IT691 - Control system Components
IT692 –Product Design Technology
SUBJECTCODE: IT501 CIE: 50
SUBJECT: MICROCONTROLLERS EXAM HOURS: 3
HOURS /WEEK: 4 SEE: 50 TOTAL SLOTS: 52
Objectives: Upon completion of this course, student should be able to:
Describe the internal architecture of microcontroller systems, including counters, timers,
ports, and memory.PO1,PO3
Program, build and test a microcontroller system. PO2,PO4
Interface a microcontroller system to user controls and other electronic
systems.PO5,PO6,PO9
Write report regarding system design and development.PO7
Part A 1. Introduction to Microcontrollers:Architecture,RISC and CISC processors. Harvard and
Von Neumann architecture.PIPO36F877 Architecture.
07Hours
2. PIPO36F877Instructions Set, addressing modes, Assembly language Programs.
07Hours
Part B
3. Memory organization, ports, Interrupts
06Hours
4. PIPO36F877 Peripherals: Timers, CCP modules, ADC modules, configuration word and
programming
07Hours
Part C
5. Serial communication module: UART, Interfacing of keys, Display - LEDs, 7-segment
LED (multiplexed display) & LCDs,
06Hours
6. DAC and ADC, generation of PWM with PIC microcontroller.
07Hours
Part D
7. Architecture, Instruction set of 8051 microcontrollers
06Hours
8. Programming 8051 microcontrollers.
06Hours
TEXT BOOKS:
1. Design with PIC microcontrollers, J.B.PEATMAN, Pearson Edication, 1998, 1st Edition.
2. The 8051 Microcontroller architecture programming &applications,KENNETH J
AYALA - penram International publishing, 1999,2nd' Edition (unit 7,8)
REFERENCE BOOKS:
1. Programming and Customizing 8051 Microcontroller, Mike Predko, PHI, 2000, 1st
Edition.
2. Microcontrollers theory and applications, Ajay V Deshmuk, TMH, 2007, 1st Edition.
SUBJECTCODE: IT502 CIE: 50
SUBJECT: DIGITAL SIGNAL PROCESSINGEXAM HOURS: 3
Hours /Week: 4 SEE: 50 TOTAL SLOTS: 52 Prerequisites: Signals and systems
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of signal properties and implementation of transforms.PO1,PO2
Design and implementation of digital filters.PO3,PO4,PO7
Study of applications of DSP. PO2,PO6
PART-A 1. Signal Transforms: DFT, Properties of DFT, and IDFT.
07Hours
2. Convolution and Correlation: Circular Convolution, Correlation, Correlation of
Discrete time signals, correlation coefficient computation.
06Hours
PART-B 3. Computation of FFT: Decimation in Time FFT, Decimation in Frequency FFT, IFFT, FFT
Algorithm for a composite numbers. DCT: Features, advantages, DCT-2(Exclude Signal flow
diagrams).
07Hours
4. System Realization: Direct, Parallel and Cascade form for FIR & IIR Systems
06Hours
PART-C 5. FIR filters: Properties, Filter Design using Windows (Rectangular, Hamming and Hanning), Filter
design using Frequency sampling technique.
07Hours
6. IIR Filters-I: Specification and design techniques, Design of digital Butterworth and Chebyshev low
pass filters using Analog filter design techniques, Transform of Low pass to High pass, Band pass and
Band rejection filters. Comparison of IIR and FIR filters
06Hours
PART-D 7. IIR Filters II: Design of digital Butterworth and Chebyshev low pass filters using Digital filter design
techniques: Impulse Invariant and Bilinear Transformation techniques
07Hours
8. Applications of DSP:Multirate signal processing-Introduction, Decimation process, Interpolation
process, Digital filter bank. Adaptive filters: LMS adaptive algorithm, applications of adaptive filters.
06Hours
TEXT BOOK:
Modern Digital Signal Processing, V. Udayashankara, Second Edition, PHI
REFERENCE BOOKS:
1. Digital Signal Processing, PROAKIS and MANOLAKIS, Prentice Hall of India /
Pearson, 3rd
Edition.2006 Reprint.
2. Digital Signal Processing, S K MITRA, McGraw-Hill 4th
Edition.2002 Reprint.
SUBJECTCODE: IT503 CIE: 50
SUBJECT: BIOMEDICAL INSTRUMENTATION EXAM HOURS: 3
HOURS /WEEK: 4 SEE: 50 TOTAL SLOTS: 52
Prerequisites: Transducers and Instrumentation
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of nature, behavior and acquisition of biomedical signals. PO1,PO2
Study of various lifesaving Biomedical Instruments PO4,PO6PO7
Understand safety aspects and working of critical care Instruments PO8,PO9
Part-A 1. Fundamentals: Sources of biomedical signals, basic medical instrumentation system,general
constraints in design of biomedical instrumentation systems. Bioelectric signals and
electrodes: Origin of bioelectric signals,recordingelectrodes,Electrode-tissue
interface,polarization, ,electrodes for ECG,EEG,EMG.
07Hours
2. Electrocardiograph: Electrical activity of heart,block diagram of electrocardiograph,ECG
Leads system,effects of artifacts on ECG recordings. Electroencephalograph: Typical EEG
signal waveform,block diagram of Electroencephalograph,Computerised EEG analysis.
07Hours
Part-B 3. Patient monitoring system: Bedside patient monitoring system,centralmonitors,heart rate
measurement-average heart rate meter,instantaneous heart rate meter,measurement of
pulserate.
06Hours
4. Blood pressure and respiration rate measurement: Direct method of BP
measurement(fluid filled system),Indirect methods-
Korotkoffmethod,Rheographicmethod,Oscillometricmethod,Ultrasonic Doppler shift
method. Measurement of respiration rate: Impedance pneumography,CO2 method,.
07Hours
Part-C 5. Blood flowmeters: Square wave Electromagnetic bloodflowmeter,Ultrasonic Doppler shift
blood flowmeter,NMR blood flowmeter,Laser Doppler blood flowmeter.
06Hours
6. Cardiac pacemakers: Need for cardiac pacemakers,Externalpacemakers,Types of
implantable pacemakers,programmablepacemaker,Ventricular synchronous demand
pacemakers,rate responsive pacemakers.
06Hours
Part-D
7. Cardiac Arrhythmia: Arrhythmia monitor, ST/AR Arrhythmia algorithim, data
compression and processing of ECG by AZTEC, detection of ventricular fibrillation, exercise
stress testing
06Hours
8. Patient safety: Electric shock hazards,Grossshock,effects of electric currents on human
body, micro current shock, electro physiology of ventricular fibrillation, types of leakage
currents, precautions to minimize electric shock hazards, testing of biomedical equipment.
07Hours
TEXT BOOK:
1. Handbook of Biomedical Instrumentation, -R S KHANDPUR- Tata Megrawhill
Co.2003 2nd
Edition
REFERENCE BOOKS:
1. Introduction to biomedical equipment technology-Joseph.J.Corr and John.M.Brown,,
Pearson education., 4th
Edition, 2001
2. Principles of applied biomedical Instruments-Leslie Cromwell and John M
Brown,Pearson education, 4th
Edition, 2004
SUBJECTCODE: IT504 CIE: 50
SUBJECT: Control Systems EXAM HOURS: 3
Hours /Week: 4 SEE: 50 TOTAL SLOTS: 52 Prerequisites: Mathematics & Network Analysis
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of various control systems and their ingredients(PO2,PO4)
To develop system modeling and determine the mathematical model of complex systems(PO1,
PO2, PO3)
Analyze the behavior of a system and its stability in time domain (PO2,PO4,PO6)
Analyze the behavior of a system and its stability using frequency domain tools(PO2, PO4,PO6)
Part-A 1. Introduction to Control systems and Modeling: The control system: Definition and its
Classifications, Types of feedback and its effects, Types of modeling of physical systems and
Differential equations of physical systems .
07 Hours
2. Modeling of systems: Mechanical systems: Translational systems (Mechanical
accelerometer, Levered systems excluded), Rotational systems, Gear trains, Electrical
systems: F-V and F-I Analogous systems
07Hours
Part-B
3. Block diagrams and signal flow graphs: Transfer functions, Block diagram algebra, Signal
Flow graphs (State variable formulation excluded),
07 Hours
4. Time Response of feedback control systems: Standard test signals, Unit step response of
First and second order systems, Time response specifications: Time response specifications
of second order systems: Transient specifications and steady – state errors and error
constants.
07 Hours
Part-C
5. Stability analysis: Concepts of stability, Necessary conditions for Stability, Routh- stability
criterion, Relative stability analysis; More on the Routh stability criterion
06 Hours
6. Root–Locus Techniques: Introduction, The root locus concepts, Construction of root loci.
06 Hours
Part-D
7. Stability in the frequency domain: Mathematical preliminaries, polar plot, Nyquist
Stability criterion, (Inverse polar plots excluded), Assessment of relative stability using
Nyquist criterion, (Systems with transportation lag excluded).
06 Hours
8. Frequency domain analysis: Introduction, Correlation between time and frequency
response, Bode plots, Assessment of relative stability using Bode Plots.
06Hours
TEXT BOOK :
Control Systems Engineering, J. Nagarath and M.Gopal, New Age International (P) Limited,
Publishers,– 4th
Edition, 2005
REFERENCE BOOKS:
1. Modern Control Engineering,K. Ogata, Pearson Education Asia/ PHI,2002,4th Edition.
2. Automatic Control Systems,Benjamin C Kuo, ,PHI,7rd
Edition,200
SUBJECTCODE: IT505 CIE: 50
SUBJECT:DATA ACQUISITION AND VIRTUAL INSTRUMENTATIONEXAM HOURS: 3
Hours /Week: 4 SEE: 50 TOTAL SLOTS: 52
Prerequisites: Logic Design, Electronic Measurements.
Objectives: Upon completion of this course, student should be able to: • Know the fundamentals of analog and digital signal conversion, specification and
applications(PO2,PO4)
• Understand the working of various A-D and D-A converters(PO2,PO4)
• Understand basics of graphical programming language.(PO10,PO3,PO7)
• Know the basics of Lab VIEW software simulation tool.(PO10,PO3,PO7)
PART-A 1. General considerations and Converter Specifications:Introduction, basic converter
considerations, digital logic levels and control logic. Specifications: Accuracy, acquisition time,
aperture time, code skipping/code elongation, common mode range, conversion time, glitch and
de glitcher, droop rate, monotonicity, noise, quantization error, resolution, settling time, slew
rate, stability and switching time.
06 Hours 2. Digital to Analog Converters:D/A conversion techniques, DAC components and accuracy
considerations.Numerical examples on DAC.
07Hours
PART-B 3. Analog to Digital Converters:A/D conversion techniques, types of ADC and error sources in
ADC.Numerical examples on ADC.
07Hours 4. Applications of DAC: Data distribution, CRT displays, A/D converters, frequency
synthesizer, signal generator, digital to shaft position converter, liquid flow control and programmed power supplies.
06Hours PART C
5. Applications of ADC: Electronic weighing system, digital voltmeters, automatic calibrator for multi-channel signal conditioning system, digital micrometer, ratio-metric measurement, data acquisition system, plasma TV panel display and automotive diagnostic test systems.
07Hours
6. Introduction to Labview: Data flow and Graphical Programming Language,working of Lab view Examples- Temperature System and frequency response Virtual Instrumentation-usinglabviewin the real world,theevolution,DataAcquisition,GPIB,Communication using serial port,Real world Applications,PXI and VXILabview Add-on tool kits,Labviewreal-time,FPGA,PDA and Embedded.
06 Hours
PART D
7. Labview Environment-I:Front Panels ,block diagrams ,Labview projects ,Sub VIs, the Icon
and the Connector, Activity, Allignment Grid and Pull down Menu’s
07 Hours
8. Labview Environment-II: Floating Palettes,the Tool bar,PopupMenu’s,ExpressVis,Displaying
Sub VIs as expandablenodes,Activity-Front Panel and block diagram basics. 06 Hours
TEXT BOOKS: 1. Hand book of A/D & D/A converters. HNATEK,John Wiley,2
nd Edition,1985
2. Labview for Everyone :Graphical Programming made easy and Fun.(Third Edition)Author-Jeffrey Travis and Jim Kring.Publishers-Pearson Education.
REFERENCE BOOKS: 1. Principles of data conversion system design,Behzadrazavi IEEE press 1995. 2. Lab view manual- National Instruments
SUBJECTCODE: IT506 CIE: 50
SUBJECT: PROCESS INSTRUMENTATION-II EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Prerequisites: Process Instrumentation-I Objectives: Upon completion of this course, student should be able to:
Understand the construction, working principle of various transducers. PO4
Study the behavior and applications of various process parameters.PO5
Familiar with bulk food and power process industries.PO6
Write Typical Instrumentation Flow plans.PO5,PO7
Part A 1. Humidity Measurement: introduction, Dry and wet bulb psychrometers, Hair hygrometers,
Dunmore cells, thin films capacitances humidity sensor; Dew point hygrometers: surface
conductivity method. 5 Hours
2. Moisture measurements: measurement of moisture in gases and liquids- electrolytic
hygrometer ,capacitance hygrometers, measurement of moisture in solids- infrared absorption
or reflection moisture gauge, resistance moisture gauge. 5 Hours
Part B
3. Viscosity measurement: efflux cup viscometers, capillary viscometers- Differential pressure
type, falling ball viscometer, float viscometers-single-float viscometer, rotational industrial
viscometers-magnetic coupling viscometer.
5 Hours
4. Introduction to industrial processes: classification by variables, classification by
measurement signals, basic measuring circuits, typical bridge circuits, balancing methods,
telemeters. 5 Hours
Part C
5. Instrumentation Practices in the process industries: Instrumentation department functions
and responsibilities, Project engineering, plant test and process analysis, maintenance records,
standardization of instruments 5 Hours
6. Steam power plant instrumentation: Selection of instrumentation, primary power plant
measurement-pressure, temperature, flows levels, combustion guides ,Secondary power plant
measurement-smoke density, PH, electrical conductivity &speed . 5 Hours
Part D
7. Brewery Instrumentation: Control of hot water tanks, control of ceneal cookers and mask
tubes, sparge –water control systems, brew-kettle control systems, wort cooling control systems,
fermenter control system. 5 Hours
8. Preparation of wiring diagrams for instrument applications: Objective, preparation of
schematic diagrams, symbols, panel board functions and types and basic arrangements. panel
materials, location of panels. 5 Hours
TEXT BOOKS:
1. Industrial Instrumentation –K.Krishnaswamy and S.Vijayachitra, new age international
publication (unit 1, 2 and 3)
2. Hand Book of Applied Instrumentation- Considine and Ross, McGraw Hill book company,1st
Edition,1985. (Units 4, 5, 6,7and 8)
REFERENCE BOOK:
Instrument Engineers Handbook - B G LIPTAK, CRC Press,3rd
Edition,2004.
SUBJECTCODE: IT507 CIE: 50
SUBJECT: Microprocessor Lab EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 14
Objectives: Upon completion of this course, student should be able to:
Develop ALP for microprocessor applications PO2,PO5,PO6
Design and interface processor with various peripherals PO7,PO10,PO9
1.
a. Write an assembly language program for multi precision addition and subtraction operations
b. Generate a square wave on Pco pin of 8255.
2.
a. Write an assembly language program to sort a set of N 16 bit unsigned integer numbers in
ascending/ descending order using bubble sort algorithm. Length of the numbers N is in word memory
location Xand the integers start from word memory location X+l.
b. Interface a relay and write program for switching
3.
a. Write an assembly language program to find the G.C.D. of two 16 bit unsigned integers
b. Interface a 7-segment display and write program to display number from 0 to 9 in succession at a
regular interval.
4.
a. Write an assembly language program to find the average of N 16 bit unsigned integers,
b. Generate a sine wave of programmable amplitude using DAC interface
5.
a. Write an assembly language program to convert a BCD number to 7-segment Code using look-up table,
b. Interface a matrix key pad and write program to identify the key closed.
6.
a. Write an assembly language program to check whether the given number belongs to special code or
not(eg. 2 out of 5 code)
b. Generate a triangular wave using a DAC interface
7.
a. Write an assembly program to perform the following
If contents of X = 1, then determine Z = (Y+W)/V
If contents of X = 0, then determine Z = (Y* W) - V
For other values of X store 00 in location Z
Where Y, W, V are 16 bit unsigned integers.
b. Interface an 8-bit ADC and write program to store the converted data in memory location.
8.
a. Develop and execute assembly language program that implements Binary search algorithm. The
data consists of sorted 16 bit unsigned integers. The search key is also a 16 bit unsigned integer.
b. Interface a stepper motor and write program to rotate in clock-wise direction by N-steps.
9.
a. Write an ALP to count the number of 0’s & 1’s in a set of 16 bit unsigned numbers. Display the result
on screen.
b. Implement a programmable up/down 4bit binary/decade counter using the I/O lines in the Add-on card.
Provision for selecting up or down count, binary or decade counting and loading an initial value is to be
provided.
10.
a. Write an assembly language program to classify 16- bit unsigned numbers in to odd and even numbers
b. Using the 8255 in the ADD-ON card realize an 8 to 1 multiplexer.
11.
a. Write an ALP to generate FIBONACCI SERIES.
b. Develop and execute an assembly language program for rolling display using 4 digit seven segment
displays.
12.
a. Develop and execute an assembly language program to compute factorial of a positive integer number
using recursive procedure. The 16 bit binary result can be left in a memory word location. (Use n such
that n! do not exceed 16 bit number).
b. Develop and execute assembly language program to realize ALU. A&B arenl bit input binary to AEU
and Y is output. Two control lines XI, X2 decide the operation to be performed. XI X2 Operation XI
X2 Operation
0 0 ADD 1 0 AND 01 SUB 1 1XOR Realize this on an ADD - On card.
SUBJECTCODE: IT508 CIE: 50
SUBJECT: Control systems Lab EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 14
Prerequisites: Control system, Instrumentation
Objectives: Upon completion of this lab, student should be able to
Design and analyze time behavior and stability of system with test signals(PO1,d3,PO5)
Design and analyze the frequency response of compensators (PO2, PO4)
Design and implement the driving circuits for actuators and nonlinear functions (PO3,
PO4, PO5)
Realize the stability analysis for the given transfer function using MATLAB
(PO1,PO3,PO5,PO6)
1. Determine the step response of a 2nd order system, using RLC circuit and measure rise time,
peak time, maximum peak overshoot, and settling time for under damped, critically damped
and over damped, conditions. Verify using theoretically calculated values.
2. To analyse the stability of SOS for a step input by
a. Varying ζ,keepingωnconstant
b. Varying ωn ,keeping ζ constant
3. To determine the frequency response of a lead network and verify using Bode plot.
4. To determine the frequency response of a lag network and verify using Bode plot.
5. Determine the characteristics of synchro transmitter / receiver. Rig up a synchro position
control system.
6. Design of relay driving circuits using opto-couplers.
7. Design of relay driving circuits using LDR.
8. Realization of non-linear functions-Dead zone ,Hysterisis and saturation using op-amps.
9. Determine the response of P, PI and PID controller for step input.
10. Using MATLAB software, plot the root locus with and without compensation for a given
transfer functions and verify using theoretical analysis.
11. Using MATLAB software, plot the Bode-plot with and without compensation for a given
transfer functions and verify using theoretical analysis.
12. Using MATLAB software, plot the Nyquist diagram for the given transfer functions and
verify using theoretical analysis.
HS 004 - COMMUNICATION SKILLS - II (1-0-1) 1.5
The course is designed for 39 hours in a semester. This course is structured 3 hours per session
of 13 Sessions and will be conducted in the following comportment.
Session No. Topics No. of hours 39
Session 1 College to Corporate - Change management
Session 2 Etiquettes and behavior - General Professional Power of
Dressing and Grooming
Session 3 Meetings & Report writing
Session 4 Stress Management
Session 5 Aptitude and Analytical Skills/ practice papers
Session 6 Reading and interpreting advertisements
Session 7 Resume writing & writing covering letters
Session 8 Understanding types of Interviews
Session 09 The essence of Group Discussion in Interviews
Session 10 Mock Interviews - GD
Session 1 1 Mock Interviews - Panel Interviews
Session 12 Mock Interviews - Screening/Individual Interviews
Session 13 Recap and Feedback
Intellectual property & Proprietary of 1-Excel Consultancy Services
SUBJECTCODE: IT601 CIE: 50
SUBJECT: ANALYTICAL INSTRUMENTATIONEXAM HOURS: 3
Hours /Week: 4 SEE: 50 TOTAL SLOTS: 52
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of sensors, transducers & instrument calibration techniques.PO1,PO5
Operate & working with different type of instruments related to absorption and emission of
radiation in UV & visible region of spectra.PO2,PO10
Select suitable spectrometer for Raman & Mass spectrometric technique.PO3,PO5
Identify&separate different components in complex compounds using qualitative and
quantitative methods.PO8
Part-A 1. Fundamentals of Analytical Instruments:
Elements of Analytical Instruments, Sensors and Transducers, Signal Conditioning in Analytical
Instruments, Read out systems, Intelligent Analytical Instrumentation Systems, PC based
Analytical Instruments, Performance requirements of Analytical Instruments, Instrument
calibration Techniques.
07Hours
2. Colorimeters and Spectrophotometers(Visible-UV)
Electromagnetic radiation, Laws relating to Absorption of Radiation, Absorption Instruments.
06Hours
Part-B 3. Colorimeters and Spectrophotometers(Visible-UV) Continued
Ultraviolet and Visible Absorption Spectroscopy, Colorimeters/Photometers,
Spectrophotometers, Source of Error in Spectrophotometric Measurements.
06Hours
4. Atomic Absorption Spectrophotometers
Atomic Absorption Spectroscopy, Atomic Absorption Instrumentation, Sources of Interference
07Hours
Part-C
5. Raman Spectrometer
Raman effect, Raman Spectrometer, PC based Raman Spectrometer, Infrared and Raman Micro
spectrometry.
06Hours
6. MassSpectrometer
Basic Mass Spectrometer, Principle of operation, Types of mass spectrometers, Components of
Mass spectrometers, Inductively Coupled Plasma-Mass Spectrometry, Trapped Ion Mass
Analyzers, Ion Cyclotron Resonance (ICR) Mass Spectrometry, Quadrupole Ion Mass Analyzers,
Resolution in Mass Spectrometer, Applications of Mass Spectrometry.
07Hours
Part-D
7. Gas Chromatographs
Chromatography, Basic Definitions of Chromatography, Gas Chromatography, Basic Parts of a
Gas Chromatograph, Methods of Measurement of Peak areas.
06Hours
8. Thermo-analytical Instruments
Thermo-analytical Methods, Thermogravimetric Analysis (TGA), Differential Thermal
Analysis(DTA), Differential Scanning Calorimetry, Simultaneous Thermal Analysis/Mass
Spectrometer.
07Hours
TEXT BOOK:
1. Hand book of Analytical Instrumentation: R.S. Khandpur, Second Edition,TMH, 2006.
REFERENCE BOOKS:
1. Instrumental Methods of Chemical Analysis: Gurdeep R. Chatwal, Sham K. Anand, Himalaya
Publishing House, 5th Edition,2005
SUBJECTCODE:IT602 CIE: 50
SUBJECT: Embedded System Design EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40 Objectives: Upon completion of this course, student should be able to:
Compare embedded system design models using different processor technologies (single
purpose, general purpose & application specific processors).PO1,PO9
Describe and compare the various types of peripherals used in embedded systems.
PO3,PO4
Use modern engineering tools necessary for integrating software and hardware
components in embedded system designs.PO9,PO10
Design, implement and test an embedded system using ARM processor.PO2,PO4
Part A
1. Introduction: Embedded systems overview, design challenges, Processor technology-
General purpose processors, Single purpose processors and Application specific
processors.
5Hours
2. Design technology and Trade-offs.
Standard single-purpose processors: Design and applications of timers, counters,
watchdog timers& UART.
5Hours
Part B 3. Pulse width modulators, LCD controllers, Keypad controllers. Stepper motor controllers,
Analog to digital converters and Real time clocks.
5Hours
4. Memory: Introduction, Memory write ability & storage permanence, Common memory
types.Composing memory, Memory hierarchy & cache and Advanced RAM.
5Hours
Part C 5. Communication Protocols & Interfaces: Communication basics, Arbitration, Advanced
communication principles, Serial protocols, Parallel protocols and Wireless protocols.
6Hours
6. ARM Processor Fundamentals: Registers, Current program status register, Pipeline,
Exceptions, Interrupts, Vector table and Core extensions.
5Hours
Part D 7. Embedded C Programming: Overview of C Compilers and optimization, C looping
structures, Register allocation, Function calls, Pointer Aliasing.
5Hours
8. Structure arrangement, Bit fields, Unaligned data and Endianness, Division, Floating
point, Inline functions, Inline assembly and Portability issues.
4Hours
TEXT BOOKS:
1. Embedded System Design: A Unified Hardware/Software, Introduction-Frank Vahid,
Tony Givargis,John Wiley & Sons, Inc.2002.
2. ARM System Developer’s Guide,Andrew N. Sloss,DomonicSymes and Chris Wright,
Elsevier, Morgan Kaufmann Publishers, 2008.
REFERENCE BOOKS:
1. Embedded Systems:Architecture and Programming,RajKamal,TMH. 2008.
2. ARM Processor manual, ISM, Bangalore, 2005.
SUBJECTCODE:IT603 CIE: 50
SUBJECT: Process Control EXAM HOURS: 3
Hours /Week: 4 SEE: 50 TOTAL SLOTS: 52
Prerequisites: Logic design, Analog signal conditioning Circuits, Control system, Data
Converters
Objectives: Upon completion of this course, student should be able to: • Understand the different elements in a process control loop and different process control
principles(PO2,PO9)
• Understand the use of different standards and symbols of process industry(PO5,PO6,PO7)
• Design of Analog and Digital process controllers(PO2,PO4,PO10)
• Study control loop characteristics and annunciators(PO3,PO6,PO9)
Part-A 1. Introduction to Process Control: Process control block diagram, control system evaluation, units,
standards and definitions (Except1.6.4 of C D Johnson). Converters: Frequency based converters,
Data Acquisition Systems: DAS Hardware, DAS software.
07Hours
2. Final control: Introduction to final control operation, signal conversions, actuators, valve actuators,
valve positioner.Control drawings: P & ID symbols and diagrams: flow sheet symbols, inter logic
symbols, graphic symbols.
06 Hours
Part-B 3. Control Valves: Capacity of control valve, valve sizing, determining pressure drop across valve,
cavitation and flashing, valve range ability, selection factors, sequencing control valves, viscosity
corrections.
06Hours
4. Controller principles: Introduction, process characteristics, control system parameters,
discontinuous control modes, continuous control modes, and composite control modes.
07 Hours
Part-C 5. Analog controllers: Introduction, general features, electronic controllers, pneumatic controllers,
designs considerations.
07Hours
6. Digital controllers: Digital electronic methods, computers in process control, process control
networks, characteristics of digital data.
06Hours
Part-D 7. Combination control systems: Ratio controller, Cascade controller, saturation in cascade loops, feed
forward control, advantages, technique.
06Hours
8. Control-loop characteristics: Introduction, control system configuration, multivariable control
systems, control system quality, stability, and process loop tuning.
07 Hours
TEXT BOOKS:
1.Process Control Instrumentation Technology, C D Johnson PHI,8
th Edition, 2004
2.Instrumentation for Process Measurement and control, Norman.A.Anderson, CRC Press, Third
Edition
REFERENCE BOOK: 1. Instrument Engineers Handbook (Vol 1 & 2),B G Liptak ,Chilton Book Company, 3
rdEdition
2. Process Control, K Krishnaswamy, New age International India, 1st Edition, 2006.
3. Computer based Industrial Control, Krishna Kant, PHI.
SUBJECTCODE:IT604 CIE: 50
SUBJECT: Advanced Control SystemsEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Prerequisites: Control system, Mathematics
Objectives: Upon completion of this course, student should be able to
Design and implement suitable compensators for control systems using time and
frequency domain tools (PO2,PO3).
Develop the model in various configurations which relates the terminal variables with
internal variables of Continuous and Discrete control systems (PO1,PO4,PO7)
Determine the response of complex Continuous and Discrete systems using state space
model(PO2, PO3)
Obtain the desired response of a system by placing poles in the desired locations in time
domain (PO2, PO3)
Part A
1
Design of Lag/Lead/Lag-lead compensators using Frequency domain(Bode plot)
technique: Lead, lag, lead lag network and compensator design using Bode techniques.
05Hours
2 Design of Lag/Lead/Lag-lead compensators using Root Locus technique :Lead, lag,
lead lag network and compensator design using Root locus techniques.
05Hours
Part B
3 Analysis of LTI continuous time systems using State space method: Introduction,
state space representation using physical variables, state diagram, Conversion of state
variable Models to Transfer functions, Conversion of Transfer functions to Canonical
state variable models, Similarity Transformation, Eigen values and Eigen vectors and
Invariance properties.
05Hours
4 Solution of state equations and Analysis of Continuous time systems :Solution of state
equations for homogeneous and non homogeneous systems, State transition matrix(STM)
and its properties, Computation of State Transition matrix( eAt
) using Laplace
Transformation , Similarity transformation and Caley-Hamilton theorem methods.
Problems on finding the Solution of state equations for both homogeneous and non
homogeneous systems by computing STM. Controllability and Observability.
05Hours
Part C
5 Z- Plane Analysis of Discrete Time Control Systems and its Stability Analysis:
Introduction, Impulse Sampling and Data Hold, Pulse Transfer Function, Mapping
between the s-plane and the Z- plane, Stability Analysis of Open loop and Closed loop
systems in the z-plane.
05Hours
Part D
6 Analysis of LTI discrete time systems using State space method: Introduction, state
space representation using physical variables, state diagram, Conversion of state variable
Models to Pulse Transfer functions, Conversion of Pulse Transfer functions to Canonical
state variable models, Similarity Transformation.
05Hours
7 Solution of state difference equations and Analysis of Discrete time systems :
Solution of state equations for homogeneous and non homogeneous systems, State
transition matrix(STM) and its properties, Computation of State Transition matrix(Z-k
)
using Z- Transformation method, Similarity transformation method and Caley-Hamilton
theorem method. Problems on finding the Solution of state equations for both
homogeneous and non homogeneous systems by computing STM. Controllability and
Observability.
05Hours
8 Pole placement Design and State Observers for both Continuous and Discrete Time
Systems:Introduction, Stability improvement by state feedback, Necessary and sufficient
conditions for arbitrary Pole – Placement, State regulator Design and Design of State
Observers.
05Hours
TEXTBOOKS:
1. Digital control and state variable methods, MadanGopal, PHI, 2nd
Edition, 2005.
2. Discrete time Control Systems, K.Ogata, PHI publication, 2nd
Edition,2005.
REFERENCE BOOKS:
1. Modern Control Engineering , K. Ogata, PHI publication, 3rd
Edition, 2002.
2. Modern Control Engineering, Roy Choudhury, PHI, 2nd
Edition , 2004.
SUBJECTCODE:IT605 CIE: 50
SUBJECT: Microcontroller Lab EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 14
Prerequisites: Microcontroller theory.
Objectives: Upon completion of this lab, student should be able to:
Understand assembler, debugger, and simulators.PO5
Develop ALP for Microcontroller applications.PO2,PO3
Interface controller with various peripherals.PO7
Able to design in the field of agricultural, automobiles and medical applications. PO3,PO9
Experiments are to be conducted using either PIC microcontroller or 8051
microcontroller.
1. Addition, subtraction, Multiplication and Division of 8-bit numbers.
2. Write an assembly language program to sort a set of N 16 bit unsigned integer numbers in
ascending/ descending order using bubble sort algorithm
3. Write an ALP to count the number of 0’s & 1’s in a set of 16 bit unsigned numbers.
4. Write an assembly language program to classify 8- bit unsigned numbers in to odd and even numbers
5. Write an ALP to generate FIBONACCI SERIES.
6. Write an ALP to convert a digit Hex number to ASCII and ASCII to Hex.
7. Write an ALP to convert a Binary to BCD and BCD to Binary.
8. LCD interfacing.
9. DC motor speed control
10. Stepper motor speed and direction control.
11. Traffic light simulation
12. DAC interface.
SUBJECTCODE:IT606 CIE: 50
SUBJECT:DATA ACQUISITION AND VIRTUAL INSTRUMENTATIONLABEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 14
Objectives: Upon completion of this lab, student should be able to:
Have the knowledge of the basics of data acquisition circuits and A to D and D to A
converters PO2,PO5,PO6
Study and stimulate transducer working in LabVIEW PO10,PO9
1. Sample and Hold Circuits with discrete components
2. Sample and Hold Circuits Using IC
3. Analog multiplexer.
4. Digital to analog converter (DAC-0800).
5. Programmable gain amplifier (PGA) using Analog multiplexer.
6. 8 bit Successive Approximation ADC using IC 0809 and 0800.
7. R-2R Ladder Network DAC
8. Binary weighted resistance DAC.
Experiments using Lab VIEW:
9. Basic programming and simulation experiments
10 Performance of switching operation using LDR and Phototransistor.
11 Measurement of temperature using Thermistor.
12. Measurement of temperature using Thermocouple.
13 Measurement of load using strain gauges.
SUBJECTCODE:IT607 CIE: 50
SUBJECT: MINI PROJECT (SELF LEARNING COMPONENT)EXAM HOURS: N/A
Hours /Week: 3 SEE: N/A TOTAL SLOTS: 12
Guidelines:
1. The group of Students is expected to design and demonstrate working of a Mini project.
2. The Course Advisors will advise you on preparation of synopsis, design and implementation of
the undertaken project work.
3. The groups of students have to independently carryout the project work in the allotted time of 3
hours/week.
4. The Mini-project work is to be based the concepts and Hands-on experience in Laboratory
courses already studied.
5. A duly signed report consisting of salient features and results is to be submitted before final
Demonstration.
6. The pattern of evaluation is as follows:
Synopsis presentation - 10 Marks
Mid evaluation - 10 Marks
Final Demonstration - 30 Marks
7. The panel of evaluation consists of HOD, Course Advisor, coordinator and two senior faculties
(Nominated by HOD).
SUBJECTCODE:IT651 CIE: 50
SUBJECT:Computer NetworksEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Familiarize with functions of different layers of computer network PO5,PO2,PO6
Study concepts of internet in transport layer protocols PO5,PO2
Know applications of computer networksPO8,PO3
Part-A 1. Review of Basic Concepts: Requirements- Connectivity, Cost-Effective Resource Sharing,
Support for Common Services; Network Architecture- Layering and Protocols, OSI Architecture,
Internet Architecture; Performance- Bandwidth and Latency.
5Hours
2. Direct link networks: Hardware Building Blocks-nodes, links; Error Detection- Two-
Dimensional Parity, Internet checksum Algorithm, cyclic Redundancy Check; Reliable
Transmission- Stop-and-Wait, Sliding Window: Algorithm and Finite Sequence numbers, Rings
(802.5, FDDI) –Token Ring Media Access Control, Token Ring Maintenance.
5Hours
Part-B 3. Packet Switching: Switching and forwarding – Datagrams, Virtual Circuit Switching, Source
Routing; Bridges and LAN Switches – Learning Bridges(excluding implementation), Spanning
Tree Algorithm, Broadcast and Multicast, Limitations of Bridges.
5Hours
4. Internetworking-1: Simple internetworking (IP) –Internetwork, IPv4, Service Model, Global
Address, Datagram Forwarding in IP, Address Translation(ARP), Host
Configuration(DHCP),Error Reporting(ICMP).
5Hours
Part-C 5. Internetworking-2: Routing – Network as a Graph, Distance Vector(excluding
implementation), Global Internet – Subnetting, Classless Routing(CIDR),
InterdomainRouting(BGP), Routing Areas, IP Version 6(IPv6) packet Header.
5Hours
6. End –to-End Protocols: Simple demultiplexer (UDP); Reliable byte stream (TCP) – End-to-
End Issues, Segment Format, Connection Establishment and Termination, Sliding Window
,Triggering Transmission, Adaptive Retransmission, Alternative Design Choices.
5Hours
Part-D 7. Congestion Control and Resource Allocation: Issues in resource allocation – Network
Model, Queuing discipline – FIFO, Fair Queuing; TCP Congestion Control – Additive
Increase/Multiplicative Decrease, Slow Start, Fast Retransmit and Fast Recovery; Congestion-
Avoidance mechanisms – DECbit, Random Early Detection (RED).
5Hours
8. Applications: Traditional applications – Electronic Mail (SMTP, MIME, IMAP), World Wide
Web (HTTP), Name Service (DNS), Network management (SNMP); Web services – Custom
APPLICATION Protocols (WSDL, SOAP).
5Hours
TEXT BOOK:
Computer Networks – A Systems Approach ,Larry L. Peterson and Bruce S. David,4th
Edition, Elsevier,2007.
REFERENCE BOOKS:
1. Data Communications and Networking, Behrouz A. Forouzan, 4th Edition, Tata
McGraw Hill, 2006.
2. Computer Networks, Andrews S.Tanenbaum, Pearson Education, 4th
Edition, 2004
SUBJECTCODE:IT652 CIE: 50
SUBJECT:Object Oriented ProgrammingEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Differentiate procedure oriented and object-oriented programming
concepts.PO5,PO7,PO10
Perform object oriented programming to develop solutions to problems demonstrating
usage of objects, classes and overloaded operators and other standard language
constructs.PO3,PO5
Demonstrate adeptness of object oriented programming in developing solutions to
problems demonstrating usage of data abstraction, encapsulation, pointers and
inheritance.PO3,PO5
Understand fundamental concepts of data structure.PO4,PO10
Part-A 1. C++ programming Basics: Need for object oriented programming, procedural languages,
characteristics of OOP, preprocessor directives, data types, manipulators.
5Hours
2. Structures: Structures as user defined data types, enumerated data types, Functions: passing
arguments, returning values, reference arguments, overloaded functions, inline functions.
5Hours
Part B
3. Objects and classes: Objects as data types, constructors, destructors, overloaded
constructors. Arrays: Arrays as class member data types, passing arrays, arrays as objects,
strings.
5Hours
4. Operator overloading: Over loading of unary operators, binary operators and data
conversion.
5Hours
Part C
5. Inheritance: Derived and base class, levels of inheritance, multiple inheritance, Hybrid
inheritance and virtual base class.
5Hours
6. Pointers: Pointers in C++, pointers to objects, files and streams, input/output operations.
5Hours
Part D
7. Data structures-1: Data representation stacks and linked list.
5Hours
8. Data structures-2: Queues: Single ended, D-queue and Priority queues; binary trees and its
representation.
5Hours
TEXT BOOKS:
1.Object oriented programming in TURBO C++, Robert Lafore, Galgotia Publications, 2nd
Edition.
2.Data Structures, Algorithms and Applications in C++,SartajSahni, Tata McGraw Hill
Publications.
2nd
Edition.(Part-D)
REFERENCE BOOKS:
1.C++ Programming , BjrneStrounstrap, Addison-Wesley Publications, 3rd
Edition.
2.Object Oriented Programming with C++, E Balaguruswamy, , Tata McGraw Hill
Publications, 3rd
Edition.
SUBJECTCODE: IT653 CIE: 50
SUBJECT: Communication SystemsEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Understand analog modulation techniques PO1,PO5
Know digital modulation techniques PO7,PO5,PO2
Study effects of noise in modulation PO1,PO4
Part A 1. Amplitude Modulation-1: Time-Domain Description, Frequency domain description,
Generation of AM waves, Detection of AM waves, AM/DSB, Time-Domain Description,
Frequency domain description Generation of DSBSC waves, Coherent Detection of DSBSC
Modulated waves. Costas loop, Quadrature Carrier multiplexing.
5Hours
2. Amplitude Modulation-2:AM-SSB/SC generation, Frequency-Domain Description,
Frequency discrimination method for generation an SSB Modulated wave, time domain
description, phase discrimination method for generating an SSB modulated wave,
Demodulation of SSB waves, Comparison of amplitude modulation techniques, frequency
translation, FDM.
5Hours
Part B
3. Angle Modulation: Basic Concepts, Frequency Modulation, Spectrum Analysis Of
sinusoidal FM wave, NBFM, WBFM, Constant Average power, Transmission bandwidth of
FM waves, Generation of FM waves, Direct FM, demodulation of FM waves, frequency
discriminator, ZCD, phase locked loop (1st order) of AM and FM
5Hours
4. Noise in Analog Modulation Systems: Signal-to-noise ratios, AM receiver model, Signal-
to -noise ratios for coherent reception, DSBSC receiver, SSB receiver, noise in AM
receivers using envelope detection, threshold effect, FM receiver model, noise in FM
reception, FM threshold effect, pre-emphasis and de-emphasis in FM systems
5Hours
Part C
5. Pulse Modulation-1: Sampling theorem for low-pass and band-pass signal, statement and
proof, PAM, Channel bandwidth for a PAM signal, natural sampling, flat-top sampling,
signal recovery though holding
5Hours
6. Pulse Modulation-2:quantization of signals, quantization error, PCM, electrical
representations of binary digits, PCM systems, DPCM, delta Modulation, Adaptive delta
modulation.
5Hours
Part D
7. Digital Modulation-1: Introduction, Binary Shift Keying, DPSK, QPSK, Type D flip-flop,
QPSK transmitter, non-offset QPSK, QPSK receiver.
5Hours
8. Digital Modulation-2: signal - space representation, BFSK, spectrum, receiver for BFSK,
geometrical representation of orthogonal BFSK, line codes, TDM.
5Hours
TEXTBOOKS:
1.Analog and Digital communication: Simon Haykin, John Willey, 3rd
edition 2005.
2.Principles of communication systems, Taub and Schilling, TMH, 2nd
edition, 2001.
REFERENCE BOOKS:
1.Electronic Communication Systems,Blake, Thomson publishers,2nd
Edition,2006
2.Electronic Communication Systems, George Kennedy,TMH, 2005, 2nd
Edition
SUBJECTCODE:IT654 CIE: 50
SUBJECT: COMPUTER ORGANIZATIONEXAM HOURS: 3
HOURS /WEEK: 3 SEE: 50 TOTAL SLOTS: 40 Prerequisites: Logic Design
Objectives: Upon completion of this subject, student should be able to:
understand the basics of various subsystems of a computer.PO3,PO7
Know the working of RISC and CISC.PO5
Familiarize with various standard interfaces.PO9
PART-A
1. Basic Structures of Computers:Computer types : Functional units : Input unit, Memory
unit, Arithmetic &logic unit, Output unit, Control unit; Basic Operational
Concepts : Bus Structures : Performance : Processor clock, Basic
Performance equation, Pipelining & Superscalar operation, Clock rate,
Performance measurement; Multiprocessor &Multicomputers:
05 Hours
2. Machine Instructions &Programs:Numbers, Arithmetic operations and characters,
Memory Locations & Addresses : Byte addressability, Big-endian & Little-endian
assignments, Word Alignment, Accessing Numbers, Memory Operation : Instruction &
Instruction Execution & Straight-line sequencing, Branching, Condition Codes, Generating
Memory Addresses;
05 Hours
PART-B 3. Assembly Language : Assembler Directives, Number Notation; Basic Input/Output Operations :
Stacks & Queues : Subroutines : Subroutine Nesting & Processor Stack, Parameter Passing, The
Stack Frame; Additional Instructions : Logic Instruction, Shift & Rotate Instructions, Multiplication
& Division; General features of CISC & RISC. 05 Hours
4. Input/OutputOrganization:Accessing I/O devices : Interrupts : Interrupt Hardware, Enabling &
Disabling Interrupt, Handling Multiple devices, Controlling Device Requests, Exceptions; Direct
Memory Access : Bus Arbitration; Buses : Synchronous Bus, Asynchronous Bus; Interface Circuits :
Parallel Port, Serial Port.05 Hours
PART-C 5. The Memory System:Some Basic Concepts : Semiconductor RAM Memories: Internal
Organization of Memory Chips, Static Memories, Asynchronous DRAMs, Synchronous
DRAMs, Memory System Considerations, Rambus memory.
05 Hours
6. The Memory System:Read-onlyMemories : ROM, PROM, EPROM, EEPROM, Flash
memory; Speed, Size & Cost : Cache Memories : Mapping functions; Performance
considerations : Interleaving, Hit Rate & Miss Penalty; Virtual memories : Address
Translation;
05 Hours
PART-D 7. Arithmetic Unit:Addition& Subtraction of Signed Numbers .'Addition/Subtraction Logic Unit;
Signed-Operand Multiplication : Booth Algorithm; Fast Multiplication : Bit-pair Receding of
Multipliers; Integer division : Floating-Point Numbers & Operations : IEEE Standard for Floating-
Point Numbers, Arithmetic Operations on Floating-Point Numbers.
05 Hours
8. Basic Processing Unit:Some Fundamental Concepts: Register Transfers, Performing an Arithmetic
or Logic operation, Fetching a Word from Memory, Storing a Word in Memory; Execution of a
Complete Instruction : Branch instruction; Multiple-Bus Organization : Hardwired Control :A
CompleteProcessor.
05Hours
TEXT BOOK: Computer Organization, Carl Hamacher, Z Vranesic& S Zaky ,TMH, 5
th Edition., , 2002
REFERENCE BOOKS:
1. Computer System Architecture, Morris Mano, 2nd
Edition, PHI,1986. 2. Computer system Design & Architecture, V Heuring& H Jordan,,Addison-Wesley, 1
st
Edition., 1999.
SUBJECTCODE: IT655 CIE: 50
SUBJECT: DIGITAL IMAGE PROCESSINGEXAM HOURS: 3
HOURS /WEEK: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of Image Processing and Image transforms PO2,PO1
Familiarize with Image enhancement in various domains PO7
Know effect of noise and Denoising of images PO3,PO2
Understand boundary detection leading to area computation PO6
Part-A
1. Fundamentals:Introduction, Fundamental steps in digital image processing (DIP),
components of DIP system, A simple image formation model, Image sampling and
quantization, Basic relationship between pixels,
05Hours
2. Image Transforms:Mathematical preliminaries-Vector algebra, Linear operations, Fourier
transforms, Discrete sine and cosine transforms, Hartley transform, Walsh-Hadamard
transform, Harr transform, Slant transform, K-L transform.
05Hours
Part-B
3. Image Enhancement in Spatial Domain-1: Background, Point processing – Image
negatives, Log transformations, Power law transformations, Contrast stretching, Gray level
slicing, Bit plane slicing, Histogram processing – Histogram equalization, Histogram
matching (specification), Local enhancement,
05Hours
4. Image Enhancement in Spatial Domain-2: Arithmetic/Logic operations – Image
subtraction, Image averaging, Basics of spatial filtering, Smoothing spatial filters –
Smoothing linear filters, ordered statistics filters, Sharpening spatial filters – Foundation,
Laplacian and gradient.
05Hours
Part-C
5. Image Enhancement in Frequency Domain:Background, Basic properties of the frequency
domain, Basic filtering in the frequency domain, Basic filters and their properties, Smoothing
frequency domain filters – Ideal low-pass filters, Butterworth low-pass filters, Gaussian low-
pass filters, Sharpening frequency domain filters – Ideal high-pass filters, Butterworth high-
pass filters, Gaussian high-pass filters, Homomorphic filtering.
05Hours
6. Image Restoration: Image degradation and restoration models, noise models, restoration
using spatial filtering – mean filter, geometric mean filter, harmonic mean filter, median
filter, max & min filters, midpoint filter.
05Hours
Part-D
7. Noise filtering by frequency domain filtering – band reject filter, band pass filter, notch
filter, inverse filtering, minimum mean square error (Wiener) filtering.
05Hours
8. Detection of discontinuities- Point line edge detection, Gradient operators, Laplacian, edge
linking and boundary detection- local processing. Global processing through Hough
transform, Thresholding- Foundation, Illumination role, Basic global thresholding, Region
based separation- Region growing, Region splitting and merging.
05 Hours
TEXT BOOKS:
1. Digital Image Processing, Rafael C. Gonzalez & Richard E. Woods,. Pearson Education Inc.,2nd
Edition, 2004 ( units 1,3,4,5 and 6)
2. Digital Image Processing and Analysis, B.Chanda,D.DuttaMajumder, PHI, 6th
reprint,
2005
REFERENCE BOOKS:
1. Fundamentals of Digital Image Processing,A.K.Jain, PHI, 2nd
Edition, 2007
2. Image Processing, analysis and Machine Vision, Milan sonka, VaclarHlavac and
Roger boyle, Thomson, 2nd
Edition ,2003
SUBJECTCODE: IT656 CIE: 50
SUBJECT: APPLIED NUMERICAL METHODSEXAM HOURS: 3
HOURS /WEEK: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of numerical computationPO1,PO9
Familiarize with Linear algebra based techniquesPO10
Know the working of curve fitting & root finding techniquesPO3,PO2,PO9
Understand optimization methods PO1,PO10
Part-A
1. Numerical Computation: Motivation and objectives / Number Representation/ Machine
Precision/ Round off Error /Truncation Error / Random Number Generation.
05Hours
2. Linear Algebraic Systems: Motivation and objectives / Gauss-Jordan Elimination
05 Hours
Part-B
3. Linear Algebraic Systems: Gaussian Elimination/LU Decomposition/ III- Conditioned
systems/ Iterative Methods.
05 Hours
4. Eigen values And Eigenvectors: Motivation and objectives/ The Characteristic
polynomial/ Power methods/ Jacobs’s method/ householder transformation/ QR method/
Danilevskys Method/ Polynomial Roots.
05 Hours
Part-C 5. Curve Fitting: Motivation and objectives/ Interpolation/ Newtons Difference Formula/
Cubic Splines/ Least square/ Two- Dimensional Interpolation.
05 Hours
6. Root Finding-1: Motivation and objectives/ Bracketing methods/ contraction mapping
method/ secant method.
05 Hours
Part-D 7. Root Finding-2: Mullers Method/ Newton’s Method/ polynomial roots/ Nonlinear
systems of equations. 05 Hours
8. Optimization: motivation and objectives/ Local and Global minima/ Line searches/
steepest Descent method/ Conjugate- Gradient Method/ quasi-Newton Methods/ Penalty
Functions / Simulated Annealing
05 Hours
TEXT BOOK:
Applied Numerical Methods for Engineers using MATLAB and C,ROBERT J.SCHILING
&SANDRA HARRIS, Thomson Publishing, Singapore / Bangalore, 2002
REFERENCE BOOKS:
1. Applied Numerical Analysis, GERALD AND WHETELY, Pearson Education, New
Delhi, 2002.
2. Numerical Receipies in C, WILLIM PRESS ET.AL, Cambridge publishers, New Delhi.
SUBJECTCODE:IT657 CIE: 50
SUBJECT:CONCEPTS OF OPERATING SYSTEMSEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Prerequisites: Higher Level Programming Language
Objectives: Upon completion of this course, student should be able to:
• Understand the goals, operations and different classes of an Operating System(PO7,PO6,PO9)
• understand different memory management techniques in an operating system(PO7,PO6,PO9)
• Have knowledge of Windows and UNIX(PO7,PO6,PO9)
Part – A
1. Introduction: Abstract views of OS, Goals and operation of an OS, OS and the computer system,
Interrupt action and processing of interrupts and system calls
5Hours
2. Classes of OS: Batch processing OS, Multiprogramming OS, Time sharing OS, RTOS,
Distributed OS.
5Hours
Part – B
3. Processes And Threads: Processes and programs, OS view of processes, Threads:
User and kernel level threads, Hybrid thread model. 5Hours
4. Scheduling: Concepts and terminologies, Non-preemptive scheduling-FCFS and SRN policies,
Preemptive scheduling- RR, LCN and STG policies,Scheduling in practice : long, medium and
short term scheduling. 5 Hours
Part – C
5. Memory Management: Static and Dynamic Memory allocation, Memory allocation to a
process, Reuse of memory – Performing fresh allocations using a free
list,Memoryfragmentation,Merging free areas,Memory compaction, contiguous Memory
allocation-Handling memory fragmentation,Memorycompaction,Reuse of memory areas,
non-contiguous allocation. 5Hours
6. Virtual Memory: VM Basics, Demand paging-Overview of paging,demand paging
preliminaries,pagereplacement,optimal page size, Page replacement policies-FIFO, LRU and
optimal.
5Hours
Part - D
7. Structure of OS: Operation of OS, Structure of an OS, OS with monolithic structure, Layered
design of OS, Kernel based OS, Microkernel based OS, Architecture of UNIX and Windows.
5Hours
8. Distributed Operating System: Features and nodes of Distributed systems,Network OS,
Distributed OS, reliable inter-process communication, Distributed computation
paradigms-client server computing,remote procedure calls,remote evaluation
5Hours
TEXT BOOK:
Operating Systems: A Concept Based Approach – D.M Dhamdhere, 2nd
Edition, Tata McGraw- Hill,
2002.
REFERENCE BOOKS:
1. Operating System Principles – Abraham Silberschatz, Peter Baer Galvin, Greg Gagne, 7th
edition,
Wiley-India, 2006Operating Systems – P.C.P. Bhatt, 2nd
Edition, PHI, 2006. 2.Operating Systems – Harvey M Deital, 3
rd Edition, Addison Wesley, 1990.
SUBJECTCODE:IT691 CIE: 50
SUBJECT:CONTROL SYSTEM COMPONENTSEXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40 Objectives: Upon completion of this course, student should be able to:
Know the fundamentals of motors PO1,PO2,PO8
Familiarize with working principle of different motors PO4
Know the difference between pneumatic and hydraulic actuated valves PO3,PO7
Part-A
1. A.C & D.C. Servomotors: Analysis, Transfer function and
Block Diagram load-torque speed torque characteristics. Electronic
drive circuits, Application in control.
05 Hours
2. Synchros: Principle, types, construction, errors and applications- error detection and error
transmission.
05 Hours
Part-B
3. Stepper Motors: Variable reluctance stepper motor (single stack & Multi stack) permanent
magnet stepper motor, hybrid stepper Motors, Drive circuits and High speed operations.
05 Hours
4. Induction Machines: Construction and working, speed control ( line voltage control and line
frequency control), Synchronous machines – Synchronous generator and motor, power and
torque characteristics, speed control(frequency control and self control)
05 Hours
PART-C
5. CONTROL VALVE AND SIZING: Principles, types, characteristics, Pneumatic &
hydraulic actuated valves, Solenoid operated valve.
05 Hours
6. Control valve positioners: The principle, type, characteristics and design
05 Hours
PART-D
7. Special control system components: Actuating magnets, Contactors and switches, Relays, Limit
switches, Miniature motors, electro-pneumatic circuits, Actuators for valves, I/P & P/I converters.
05Hours
8. Special Machines : Linear induction motor, reluctance motors,
brushless motors, Hysteresis motors, AC tachometers 05Hours
TEXT BOOKS :
1. Principles of Electrical Machines and Power Electronics, P.C Sen, John Wiley &
Sons, 2nd
Edition, 1997
2. Electrical Machines and power systems: Vincent Del Toro,TMH,2nd
Edition (Unit
5,6,7) , 1988,
REFERENCE BOOK:
Electrical machines, Drives & Power Systems,TheodoreWilde,Prentice -Hall International, 3rd
Edition, 1997
SUBJECTCODE:IT692 CIE: 50
SUBJECT: Product Design Technology EXAM HOURS: 3
Hours /Week: 3 SEE: 50 TOTAL SLOTS: 40
Objectives: Upon completion of this course, student should be able to:
Know the preparation of layout of the product design PO2
Familiarize with identifying customer for new products PO8
Know the design and fabrication of PCB PO4,PO2
Part-A 1. Introduction, Development process and Organizations: characteristics of successful product
development, duration and cost of product development, challenges of product development.
05Hours
2. Generic development process, concept development – Front-end process, adapting the
generic product development process.
05 Hours
Part-B
3. Identifying Customer needs and Establishing Product specifications: defining scope,
gathering data from customers, establishing relative importance of needs. Target
specifications & refining specifications.
05Hours
4. Concept generation: five-step methodology of concept generation, with a case study of any
electronic instrument.
05Hours
Part-C
5. Human Engineering Considerations in product Design: anthropometry, the design of
controls, and the design of displays, man/machine information exchange.
05Hours
6. Concept Embodiment: overview, basic methods, advanced methods, case study-computer
monitor with reference to ergonomics and esthetics.
05 Hours
Part-D
7. PCB Technology: introduction, types, applications, base materials.
05Hours
8. PCB Technology: design methods and fabrication processes.
05Hours
TEXT BOOKS:
1.Product Design and Development by Karl T Ulrich, Steven D Eppinger, Tata McGraw,-3rd
Edition,2003
2.Printed Circuit board Design and Technologyby Walter C Boshart, McGraw International,
5th
reprint (Unit 7,8) , 2001
REFERENCE BOOKS
1.Product design and manufacturingby AK. Chitale and RC Gupta – Prentice Hall, 1st Edition,
2000
2.Product Design, Kevin Otto, Kristin Wood, Pearson Education, 2nd
Edition.
HS 006 - ENVIRONMENTAL SCIENCE (AUDIT COURSE) (2-0-0) 0
1. Environment - Definition, Eco system — Balanced ecosystem, Effects of human
activities on environment Agriculture Housing -Industry Mining and
Transportation
04 Hours
2. Natural Resources: - Water resources - Availability and Quality, Water borne
diseases, Water induced diseases, Fluoride problem in drinking water. Mineral
Resources - Forest Resources - Material Cycles - Carbon, Nitrogen and Sulphur
Cycles.
08 Hours
3. Pollution, effects of pollution - Water pollution - Air pollution Land pollution -
Noise pollution.
08 Hours
4. Current Environmental issues of importance: Acid Rain, Ozone layer depletion -
Population Growth, Climate change and Global warming. Environmental Impact
Assessment and Sustainable Development Environmental Protection - Legal
aspects. Water Act and Air Act.
06 Hours
TEXT BOOKS:
1. Environmental Studies - Dr. D.L Manjunath, Pearson Education -2006
2. Environmental Studies - Dr. S. M. Prakash - Elite Publishers - 2006
REFERENCE BOOKS:
1. Environmental Studies - Benny Joseph - Tata McGraw Hill- 2005
2. Principles of Environmental Science and Engineering P. Venugopala Rao, Prentice
Hall of India.
3. Environmental Science and Engineering - Meenakshi, Prentice Hall India.