sch6-led a led d w d 30k-18k - elite lighting · warm dim series 25 6” sch6-led trims reflector...
TRANSCRIPT
24 WARM DIM SERIES
SCH6-LED
DESCRIPTION: 6” SCH8-LED Warm Dim LED Architectural Cylinder. Available with Downlight, and Wall Wash Trims. Available in Ceiling Mount, Pendant Mount, Suspended Mount, Wall Mount with only Downlight and Wall Mount with Up & Downlight mounting options.
PERFORMANCE: Operating system delivers 900, 1200, 1500 & 2000 lumens. All MAXILUME LED Warm Dim Architectural Downlights maintain a CRI of 90+ across the Dimming range of 3000K to 1800K and are binned to within 2 MacAdam ellipse . Elite’s highly selective LED diodes produce zero ultraviolet and virtually no infrared light.
OPTICS: MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick 1-step anodized self flanged reflector. Reflector offers a 45-55 degree cutoff and comes standard with smooth frost Solite diffuser distributes that light even throughout the workplace in 3 different distribution; Wide (WD), Medium (MD) and Narrow (ND).
THERMAL MANAGEMENT SYSTEM: Proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum heat sink is attached to top of reflector. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradeable.
BODY - Post painted die-formed construction for maximum heat dissipation and rust protection. Available in Matte White, Black, Silver, and Bronze finish.
MOUNTING BRACKET - Ceiling mount bracket provided for direct installation with 3-1/4” to 4” octagonal and square junction box. Pendant mount option is available and supplied with 10-1/2” stem and 5” diameter canopy cover. Ideal for slope applications up to 45 degrees. Suspended mount option is also available supplied with aircraft adjustable cable.
LED DRIVER/JUNCTION BOX: LED driver may be only serviced from above the ceiling and must be remote mounted. Available with remote mount Emergency (EMG-LED) push button.
LISTING:c-UL-us - listed for Damp location & feed Through Wiring.LM79 / LM80 U.S Patent No. - D685,118S
All LED luminaires are rated and tested to LM-79 and LM-80 standards by an independent laboratory.
DIMMABLE - The MAXILUME LED system is shipped standard with a 0-10V driver which can be dimmed down to 1% of initial light output with a 0-10V dimmer when ordered withthe following options (DIM10-120, DIM10-277). Fixtures can also be shipped with a Lutron Hi-lume A series driver which can be dimmed with Lutron Dimming Systems when orderedwith the following options (LUTH-120, LUTH-277), Lutron® Hi-Lume A-Series (LUT2W-120) 2-Wire Forward Phase Control 1% Dimming in 120V. Triac & Electronic Low Voltage dimming driver also available when ordered with the following options (DIMTR-120).
DIMMING INFORMATIONDIM10 (0-10V 1% Dimming)DIMTR (Triac & Electronic Low Voltage Dimming in 120V only)LUTH (Lutron® Hi-Lume A-Series 3-Wire or Eco System 1% Dimming)LUT2W (Lutron® Hi-Lume A-Series 2-Wire Forward Phase Control 1% Dimming in 120V)
OUR WORD - MAXILUME LED system features 70% lumen maintenance at 50,000hrs of life and carries a five-year carefree warranty for parts and components. (Labor not included)
6”Cylinder
13”7-7/8”
Architectural LED Downlight
2 58 "
3 34 "
WARM DIM
Warm Dim with Smart Dim technology mimics traditional incandescent halogen lighting through dimming. Using Warm Dim, luminaires dim smoothly from 3000K to 1800K. Warm Dim shifts smoothly over the black body radiator curve as the light dims you move into the rich amber tones that encourages relaxation. It is ideal for hospitality, architectural as well as residential applications, all while maintaining high lumen output for the most stringent energy codes today’s legislation requires. Warm Dim comes pared with high CRI of 90+ and superior lumen output.
Warm Dim 30K-18K
Smart Dim
3000K
3000K2700K
2700K
2000K
2000K
2500K
2500K
1800K
1800K
Black Body Dimming Color temperature warms from 3000K - 1800K while staying on the Black Body Locus when dimming
Elite Lighting’s Architectural Lighting Luminaries with Black Body Technology mimic traditional Halogen dimming to help create a warm ambiance.
25WARM DIM SERIES
SCH6-LED 6”Trims
Reflector with Diffuse Lens
HH6-6501 HH6-6528 (BZ)Reflector with Aluminum Disk & Diffuse Lens- Bronze
Double Wall Wash Reflector with Diffuse Lens
HH6-6577 HH6-6528 (AL)Reflector w/ Aluminum Disk & Diffuse Lens- Aluminum
HH6-6528 (WH)Reflector with Aluminum Disk & Diffuse Lens-White
HH6-6507Wall Wash Reflector with Diffuse Lens
HH6-6522Euro Deco Ring Glass with Diffuse Lens
HH6-6511Triple Ring Glass Reflector with Diffuse Lens
HH6-6525Central Etched Float Glass with Diffuse Lens
HH6-6523Prismo Deco Ring Glass with Diffuse Lens
HH6-6521Standard Ring Glass Reflector with Diffuse Lens
Deco Glass Reflector with Diffuse Lens
HH6-6509
TYPE FINISH CCT LUMENS DRIVER VOLTAGE OPTICS EMERGENCY TRIM TYPE REFLECTOR/RING FINISH
WAR
M D
IM
SCH6-LED o WH-WHITEo BK-BLACKo BZ- BRONZEo SI-SILVER
o WDM-30K-18K o 900Lo 1200Lo 1500Lo 2000L
o DIMTRo DIM10o LUTECOo LUT2Wo DMX-512o DMX-RDMo DALI
o 120o 277
o ND (Narrow)o MD (Medium)o WD (Wide)
o EMG-LEDTypical lumen output of the fixture is up to 1000L in emergency mode. Contact the factory for details.
o HH6-6501o HH6-6507o HH6-6509o HH6-6511o HH6-6525o HH6-6528o HH6-6577
o CL-WHo CL-SCHo SHZ-SHZo SHZ-WHo W-WHo MB-WHo WT-WH
MOUNTING
o CM-Ceiling Mounto WM-Wall Mounto UWM-Up/downlight Wall Mounto PM12-12” Pendant Mounto PM18-18” Pendant Mounto PM24-24” Pendant Mounto PM36-36” Pendant Mounto PM48-48” Pendant Mounto SM-10’ Suspended Mount (Consult factory for other sizes)
SCH6-LED-WDM-30K-18K-2000L-120-MD-HH6-6501-CL-WH TEST NO.: EL-0116144INPUT WATTS: 34.4 LUMENS: 2099 CRI: 90+ CCT: 30K-18K SPACING CRITERIA: 0.92
Candle Power Distribution (Candelas)
RC - Ceiling Cavity Reflectance RW - Wall Reflectance
RO
OM
CA
VITY
RA
TIO
Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20
Zonal Lumens Summary
0Candela TabulationLumens Per Zone
Zone Lumens
0-10 356.1210-20 599.2320-30 543.3930-40 403.3940-50 162.9750-60 28.7760-70 6.2970-80 1.7380-90 0.99
Luminance (Average candela/M2)Anglein Degrees
Average0º
Average45º
Average90º
45 21778 33048 3219755 6877 11095 1332265 1615 3401 681775 859 1077 150285 484 1307 1898
0 4767.325 4477.7115 2200.1025 1216.2535 721.8445 138.8555 18.5165 2.7475 1.0985 0.2390 0.05
RC 80% 70% 50% 30% 10% 0%RW 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
0 120 120 120 120 117 117 117 117 112 112 112 107 107 107 103 103 103 1011 113 110 107 105 111 108 106 103 104 102 100 100 99 97 97 95 94 922 107 101 97 93 105 100 95 92 96 93 90 93 90 88 90 88 86 843 101 93 88 83 98 92 87 82 89 85 81 87 83 80 84 81 79 774 95 86 80 75 93 85 79 74 83 78 74 80 76 73 79 75 72 705 89 80 73 68 87 79 72 68 77 71 67 75 70 66 73 69 66 646 84 74 67 62 82 73 67 62 71 66 61 70 65 61 68 64 61 597 79 69 62 57 78 68 61 57 66 61 57 65 60 56 64 59 56 548 75 64 57 53 73 63 57 53 62 56 52 61 56 52 60 55 52 509 71 60 53 49 69 59 53 49 58 53 48 57 52 48 56 52 48 47
10 67 56 50 45 66 56 49 45 55 49 45 54 49 45 53 48 45 43
Zone Lumens %Lamp %Fixt
0-20 955.36 46.20 45.400-30 1498.75 72.40 71.300-40 1902.14 91.90 90.500-60 2093.87 101.20 99.600-80 2101.89 101.50 100.000-90 2102.89 101.60 100.00
90º
80º
70º
60º
50º
40º
30º 20º
10º
Cone of Light
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
Distance to Plane
Initial Footcandle at
NadirBeam
diameter
4.0 116 5.1 ft
8.0 29.0 10.2 ft
12.0 12.9 15.3 ft
16.0 7.24 20.4 ft
20.0 4.63 25.5 ft
24.0 3.22 30.6 ft
463
927
1390
1853
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information.
61 62
8”
8” LED CONTROL OPTIONS6
IN
CH
A
RC
HIT
EC
TU
RA
L
HIG
H
LU
ME
N
PH
OT
OM
ET
RY
Controls Provided by EnOcean
EOSCUOccupancy Sensor
Ceiling Mount
EOSWUOccupancy Sensor
Wall Mount
ELLSUDaylight SensorCeiling Mount
ESRPU/ EDRPUWall Switches
LEVITONWall Switches
902 MHz category
WSS0S-S9WWSS0S-D9W
NWC 300UNavigan Wireless
Commissioner
LEDDULED Zone
Controller 0-10V
LEDRULED Relay Zone Controller 0-10V
Self-powered sensors and switches, combined with LED fixture controllers and a commissioning tool, permit easy configuration, intelligent local control, and seamless integration into building automation systems.
Controls Options to be Installed on the Fixture
Philips EasySense sensors provide luminaire-level control with Occupancy sensing, Daylight harvesting, and Field task tuning.
Controls Provided by Philips
Philips Field App
Controls Installed on the Fixture
SRB + SNS200-CMPFixture Will be Shipped Sensor Ready with PHILIPS SRB Bridge and EasySense SNS200-CMP Sensor which is Included to be Remote Mounted. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer.
SRBFixture will be Shipped Sensor Ready with SRB Bridge. Fixture will be Compatible with EasySense Sensor SNS200-CMP which can be Added in the Field for Remote Mounting. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer. Illumra Wireless Switches
ZBT-S1AWH ZBT-S2AWH
Enlighted Smart Sensors features digital motion, ambient light, and temperature sensing, the device provides autonomous fixture-level control
Controls Installed on the Fixture
Controls Providedby Enlighted
Energy Manager
PoE Network Switch
Programmable with Laptop
Gateway
Switch
WS-2-00Enlighted Room
Controller
CU-E3-1RFixture Will be Shipped Sensor Ready with Enlighted CU-E3-1R Control Unit Power Pack. Fixture will be be compatible with Enlighted SU-4E-00 Sensor which can be Added in the Field Remote Mounting. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
CU-E3-1R + SU-4E-00Fixture Will be Shipped with Enlighted Enlighted CU-E3-1R Control Unit Power Pack installed and SU-4E-00 Sensor provided (to be installed remotely). Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information.
61 62
8”
8” LED CONTROL OPTIONS6
IN
CH
A
RC
HIT
EC
TU
RA
L
HIG
H
LU
ME
N
PH
OT
OM
ET
RY
ZL027-N0WPower control module
ZLDNK-4W ZLDNK-8WIntellect™ Keypad Room
Controller (Required)
ZLDNK-1W ZLDNK-2W
Leviton Keypad
Leviton App
Neuron App
Fixture will be shipped with Leviton ZL027-N0W power control module installed on the fixture. Fixtures will be compatible with Leviton ZL00J-D0W sensor control module which can be added in the field for remote mounting. Fixture must be controlled with Leviton Intellect Keypad Room Controller, or Leviton Neuron App.
ZL00J-D0WSensor control module
Controls Provided by Lutron
Ceiling Mount Occupancy Sensor
Ceiling Mount Occupancy/Daylight
Sensor
Wall Mount Occupancy Sensor
Wall Mount Switch
Pico Remote
DayLight Sensor
Vive Wireless Hub
Controls Installed on the Fixture
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-010 0-10V Control Module Installed on theFixture. Fixtures will be compatible with Lutron FC-SENSOR Occupancy/Daylight Sensor or FC-VSENSORVacancy/Daylight Sensor which canbe Added in the Field for RemoteMounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a 0-10V. Driver.
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-ECO EcoSystem Control Module Control Module Installed on the Fixture. Fixtures will be compatible with Lutron FC-
SENSOR Occupancy/Daylight Sensor or FC-VSENSOR Vacancy/Daylight Sensor which can be Added in the Field for Remote Mounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a Lutron Driver.
FCJS-010Individual
Fixture Control
FCJS-ECOIndividual
Fixture Control
LutronApp
Controls Installedon the Fixture
LMFC-011Fixture Will be Shipped Legrand Wattstopper DLM Enabled with LMFC-011 Module Controller Installed on the Fixture. Fixtures will be compatible with Legrand Wattstopper DLM Load Controllers, DLM Sensors, DLM Switches, DLM Remote Control, and DLM Configuration tool.
WATTSTOPPER®
Switches
LMSW-105 LMDM-101
Remote
LMRH-105
Configuration tool
LMCT-100-2
Plug Load Controllers
LMPL-101 LMPL-201
Sensors
LMDC-100 LMLS-400 LMLS-500