Scene - Capable Lighting Control Products

Simple One-TouchScene LightingComplements AnyCommercial Demands or Residential Lifestyle

SCEN

E

CAPABLE

LIGHTING

2

SCEN

E-CA

PABL

E

Scene-Capable LightingControls From Leviton – A New Era In LightingControlThe introduction of Leviton’s Scene-Capable Monet and MuralLighting Controls marks a new era in sophisticated lighting. One that replaces the tired routine of constant attention to the manualadjustment of individual dimmers to change a décor’s lighting.Experience the pleasure of a series of picture-perfect lighting scenes created in an instant.

After following a one-time "set-and-forget" procedure, touch any one of the "scene" buttons on a Monet or Mural Scene Controllerand all attached Monet or MuralScene-Capable Dimmers will simultaneously adjust their attached loads to user-selected lighting levels.

With dimmers to accommodate a variety of light sources – including fluorescent, incandescentand magnetic low-voltage – the Monet and Mural Scene-CapableDimmers can instantly turn your fluorescents, chandeliers, wallsconces, recessed lighting and moreinto a symphony of picture perfectlighting scenes at the touch of a button.

Design The Lighting Control System That’s Just Right For You

Whatever the application scenario, Monet and Mural Scene-Cable Dimmers provide anunparalleled opportunity for lighting design specialists to create innovative lighting schemes.Customized scene lighting systems are easilyinstalled using any number of Monet or MuralDimmers in conjunction with one or more Six Scene Controllers. Additional Monet or Mural-dimmed loads can be added to lightingscenes at any time, as well as additional SceneControllers where and when needed for virtuallylimitless accessibility. The system can be furthercustomized with such enhancement products as a Hand-Held Infrared Remote Controller forroving control. The possibilities are as endless asyour imagination.

Coordinated Designer Controls From Leviton

INNO

VATI

VE Programming LightingScenes Is As Easy As 1-2-3Monet Architectural SpecificationLighting Controls:1. Press and hold the scene button that you

wish to program on a Scene Controller for more than 7 seconds. The LED next to the button will commence to flash.

2. At each local Monet Dimmer, move the slide control to set the lights to thedesired light level.

3. Return to the Scene Controller. Press thesame scene button again and hold until the LED stays on and no longer flashes. This scene button is programmed.

4. Repeat steps 1 - 3 for all other scene buttons on the Scene Controller until all scenes are programmed.

Mural Commercial Specification Scene Lighting Controls:1. Press once on the scene button that you

wish to program on a Scene Controller.2. At each local Mural Scene Dimmer,

set the lights to the desired light level. 3. Depress the program switch with an

insulated screwdriver on each Mural SceneDimmer to store programmed levels. The scene button is programmed.

4. Repeat steps 1 - 3 for all other scene buttons on the Scene Controller until all scenes are programmed.

Note: Programming where multiple Scene Controllers are used for enhanced accessibility. Programming a scene button on one Scene Controller sets the corresponding button on all other Scene Controllers, calling up the same preprogrammed lighting scene when pressed.

A New Era In Lighting Controls

3

COM

MER

CIAL

An example of a Six-SceneController managing different light sources in a restaurant:

Monet Scene Capable Lighting Controls - The Perfect

Restaurant

4

Ambiance For Every Task in Commercial Spaces

5

Scene 1The chandeliers are at 100% and the low-voltage spots are at 50% brightness for breakfast. Ceiling fans are OFF

Scene 2The chandeliers are at 100% brightness and the low-voltage spots are OFF to suit lightingrequirements for lunch. Ceiling fans are at lowspeed for ventilation.

Scene 3All the chandeliers and low-voltage spots are at 50% brightness for dinner. Ceiling fansare at low speed.

Scene 4All the chandeliers are at 25% brightness andthe low-voltage spots are at 100% brightnesswhen there is entertainment on stage. Ceilingfans are at medium speed for ventilation

Scene 5All lights are at 100% brightness and the fans are at full speed for ventilation and space clean-up.

Scene 6All lights are at 100% brightness for "ALL-ON" security for use with a LevitonOccupancy Sensor. Ceiling fans are OFF

RESI

DENT

IAL

Mural Scene-Capable Lighting Controls

An example of a Six-SceneController managing different light sources in a home theater:

Home Theater

6

Setting Just The Right Mood In Residential Spaces

7

Scene 1Six recessed down lights, two low-voltage tracklights illuminating opposite ends of the roomand fluorescent fixtures on all four sides of theroom to provide indirect lighting are at 75%brightness. This lighting scene is used for beforeand after a movie or at any time when the sunhas set and natural light is unavailable.

Scene 2The six recessed down lights and low-voltagetrack lights are at 20% brightness and all otherlights are OFF for the viewing of a movie. Very soft lighting desired for entering and exiting during the movie.

Scene 3All lights are OFF for maximum viewing conditions of a movie.

Scene 4The six recessed down lights are at 30% brightness, the low-voltage track lights at 100% brightness and the indirect fluorescent lights at 50% brightness to create a subdued, sophisticated party atmosphere.

Scene 5The six recessed down lights and the low-voltage track lights are set at 10% brightness, and the indirect fluorescent lights are at 25% brightness to create a mood appropriate for listening to music.

Scene 6All lights are at 100% brightness for clean-up.

Description Cat. No. Rating Color*

Monet Incandescent Dimmer MNI06-1L 600W Incandescent I, W, G, E, A

Monet Incandescent Dimmer MNI10-1L 1000W Incandescent I, W, G, E, A

Monet Incandescent Dimmer MNI15-1L 1500W Incandescent I, W, G, E, A

Monet Magnetic Low-Voltage Dimmer MNM06-1L 600VA Magnetic Low Voltage I, W, G, E, A

Monet Magnetic Low-Voltage Dimmer MNM10-1L 1000VA Magnetic Low Voltage I, W, G, E, A

Monet Magnetic Low-Voltage Dimmer MNM15-1L 1500VA Magnetic Low Voltage I, W, G, E, A

Monet Mark X Fluorescent Dimmer MNX10-1L 1000VA 120V Advance I, W, G, E, AMark X™/Philips Ecotron™ fluorescent dimming ballast

Monet Mark X Fluorescent Dimmer MNX15-1L 1500VA 120V Advance I, W, G, E, AMark X™/Philips Ecotron™ fluorescent dimming ballast

Monet Mark X Fluorescent Dimmer – 277V MNX10-7L 1000VA 277V Advance I, W, G, E, AMark X™/Philips Ecotron™ fluorescent dimming ballast

Monet Mark X Fluorescent Dimmer – 277V MNX15-7L 1000VA 277V Advance I, W, G, E, AMark X™/Philips Ecotron™ fluorescent dimming ballast

Monet Fan Speed Control MNF07-1L 7.5A, 120V I, W, G, E, A

Monet Fan Speed Control MNF10-1L 10A, 120V I, W, G, E, A

*Add suffix to catalog numbers as follows for color selections: Ivory (-I), White (-W), Gray (-G), Almond (-A), Black (-E)

Monet Scene-Capable Load Products

Mural Scene-Capable Load Products

Description Cat. No. Rating Color*

Mural Scene-Capable MCI10-1L 1000W Incandescent I, W, AIncandescent Dimmer (Use Color

Change Kits For Gray and Ebony)

Mural Scene-Capable Magnetic MCM10-1L 1000VA I, W, ALow-Voltage Dimmer Magnetic Low-Voltage (Use Color

Change Kits For Gray and Ebony)

Mural Scene-Capable MCX10-1L 1000VA 120V AC Advance I, W, AMark X Fluorescent Dimmer Mark X™/Philips (Use Color

Ecotron™ fluorescent Change Kitsdimming ballast For Gray

and Ebony)

*Add suffix to catalog numbers as follows for color selections: Ivory (-I), White (-W), Gray (-G), Almond (-A), Black (-E)

8

Monet and Mural Enhancement Products

Description Cat. No. Rating Color

Six Scene Controller: 6 lighting-scene buttons, MN00C-1LW No rating, use with Monet Use Colorwith dedicated OFF and group BRIGHT and Mural dimmers only Change Kitsand group DIM button

Remote Switch Unit for 3-way applications MN00R-10W No rating, use with Monet Use Color dimmers only Change Kits

Color Change Kits for MN00R-10W MNK0R-00 No load rating I, W, G, E, A

Monet Adapter Plate: Allows any Decora MN0LA-000 No load rating Metal Heat Sinkstrap-mount device to be ganged with either (large),small or large-size Monet Dimmers MN0SA-000

(small)

Signal Repeater – Use if controlling lighting 17100-1WY, No load rating (Non-color item)on more than one phase, one-way and 17100-2WYtwo-way versions available

Building Interface – Controls Monet and Mural 177BI No load rating (Non-color item)Dimmers from building control systems via momentary contact inputs

Infrared Receiver – Available with wall mount 177IR-IWA No load rating Supplied with and ceiling mount bezels Ivory, White and

Almond bezels

Hand-Held Infrared Remote Control 177RC No load rating Blackwith 5 Push-Button Keypad

9

© Copyright 2000 Leviton Manufacturing Co., Inc. All rights reserved.

G-05659/C0-25M swC-0

For more information, contact your Leviton representative or:Leviton Manufacturing Co., Inc.

59-25 Little Neck Parkway, Little Neck, NY 11362-2591Telephone: 1-800-323-8920 • FAX: 1-800-832-9538

Tech Line (8:30AM-6:00PM E.S.T. Monday-Friday): 1-800-824-3005

Leviton Manufacturing of Canada, Ltd.165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9

Telephone: 1-800-469-7890 • FAX: 1-800-563-1853

Leviton S.A. de C.V.General Arista 54-A Col. Argentina, Mexico D.F., C.P. 11270

Telephone: 011-525-386-1131, 011-525-386-2052 • FAX: 011-525-386-1797

Visit Leviton’s Web site at http://www.leviton.com

Distributed By