scc8300 - tutt bryant
TRANSCRIPT
SCC8300 Load Chart
SCC
8300
A
B
C
SCC8300 Crawler Crane Series 03
Specifications 19
Operating Condition Combination 26
Dimensions 04Main Technical Features 06Transport Dimensions 07Assembly Diagram 14boom Diagram 16
Superworks 20Lowerworks 22Attachment 23Safety Devices 24
H Operating Condition of Boom 28HJ Operating Condition Combination Boom 32FJ Operating Condition of Fixed Jib 38FJh Operating Condition of Heavy-duty Fixed Jib 40
A04 Dimensions 06 Main Technical Features 07 Transport Dimensions 14 Assembly Diagram 16 Boom Diagram
A SCC8300 crawler crane
SCC8300
A
4
Dimensions
Dimensions
A SCC8300 crawler crane
SCC8300
A
6
Main Technical Features
1. Environment adaptability: Working temperature between -40°C (-72°F) and 85°C (153°F), can operate within the altitude of 1000m and in sand storm (the function is only available with optional components);
2. Operation mechanism: Luffing time, 2 minutes; main hoisting speed 140m/min; slewing speed, 1.85r/min; travel speed, 1.3km/h;
3. Assembly and disassembly: One-button erection for boom hoist mast; easy reeving for traction winch with clutch; remote control available for main crane disassembly; self assembly for overall crane; quick disconnect for pendant and wire rope;
4. Pragmatic functions: GPS remote monitoring system; vibration handle; travel with 100% load;
5. Environmental protection standards: The engine emission complies with the European, U.S. and African Road Stage 3 Standards; the noise complies with the emission instructions of 2000/14/EC on relevant outdoor equipment; and the vibration complies with relevant standard of ISO2631;
6. Maintenance: The access t ime of da i ly maintenance positions is no more than 30min/person;
7. Control system: Two operating modes of operating and assembling. the crane has the functions of real-time display of center of gravity and levelness of machine, off-line stop action, emergency electric control, lightning protection, closed circuit monitor, etc.; electric and mechanical double protection devices;
8. Abundant configurations: 300t rated boom lifting capacity, 1650N•m rated moment. 7 operating
conditions: The boom (H) operating condition (20m-92m), the combination boom operating condition (64m-112m), luffing jib operating condition (62m+66m), fixed jib operating condition (68m+42m), heavy-duty fixed jib operating condition (74m+18m), combination boom+ fixed jib operating condition (88m+37m) and boom+ luffing jib+ fixed jib operating condition (62m+60m+37m);
9. Counterweight combination: Common use of central ballast and upper counterweight blocks; two capacity charts for different operating conditions—Series 1 with central ballast and Series 2 without central ballast;
10. Operator-centered design: The driver’s cab is wide and bright, it can be tilted to provide a broad view. The control lever and panel layout complying with the ergonomic design;
11. Optimized design: The design is in accordance with American ANSI B30.5 and Chinese GB3811 Design Code for Cranes, and the transport dimension and weight comply with the foreign and domestic road transportation regulations; the compatibility design of upgrading from Euro III to Euro IV is available;
12. Electric control software: The all-electric control system is used. It has the function of fault self-diagnosis and equipped with an electric backup system;
13. Centralized lubrication system: A centralized lubrication system under auto-control provides automatic lubrication to key moveable parts.
Main Technical Features
A
SCC8300
SCC8300 crawler crane
A
7
Transport Dimensions
Transport Dimensions
Crane body x1Length 12.76m Width 3.00m Height 3.20m Weight 45.00tCrawler assembly x2Length 9.38mWidth 1.13m Height 1.46mWeight 25.00tBoom base NO.2825A ×1(Includes two drums and rope) Length 10.35m Width 2.94m Height 3.14m Weight 16.90t3m boom insert NO.2825A ×1Length 3.18mWidth 2.94mHeight 2.84mWeight 1.35t6m boom insert NO.2825A ×2Length 6.18mWidth 2.94mHeight 2.84mWeight 2.24t12m boom insert NO.2825A ×4Length 12.18mWidth 2.94mHeight 2.84mWeight 3.93t12m boom insert II NO.2825A x1Length 12.18m Width 2.94m Height 2.84m Weight 3.43t
A SCC8300 crawler crane
SCC8300
A
8
Transport Dimensions
Boom tip NO.2825A ×1Length 7.98mWidth 2.94m Height 3.20mWeight 6.86tLuffing jib tip NO.2316A ×1Length 9.83m Width 2.42m Height 2.07m Weight 4.44tLuffing jib base with masts ×1Length 12.41mWidth 2.42mHeight 3.19mWeight 8.60t6m luffing jib insert NO.2316A ×1Length 6.15mWidth 2.42mHeight 1.91mWeight 1.42t12m luffing jib insert NO.2316A ×4Length 12.15mWidth 2.42mHeight 1.91mWeight 2.48t12m transport insertNO.2825A /NO.2316A x1Length 12.19m Width 2.94m Height 2.84m Weight 3.50t
Transport Dimensions
A
SCC8300
SCC8300 crawler crane
A
9
Transport Dimensions
Extension boom ×1Length 3.08mWidth 1.08m Height 1.41mWeight 0.64tFixed jib base NO.1412A ×1Length 7.91m Width 1.29m Height 1.31m Weight 1.26tFixed jib tip NO.1412A ×1Length 7.01mWidth 1.29mHeight 1.42mWeight 1.41t6m fixed jib insert NO.1412A ×1Length 6.11mWidth 1.29mHeight 1.45mWeight 0.75t11.5m fixed jib insert NO.1412A ×4Length 11.61mWidth 1.29mHeight 1.45mWeight 1.30tLight-duty fixed jib base NO.0908A x1Length 5.22m Width 1.01m Height 0.85m Weight 0.27t
Transport Dimensions
A SCC8300 crawler crane
SCC8300
A
10
Transport Dimensions
Light-duty fixed jib tip NO.0908A x1Length 5.47mWidth 1.01m Height 0.84mWeight 0.47t3m light-duty fixed jib insert NO.0908A x1Length 3.08m Width 1.01m Height 0.85m Weight 0.12t6m light-duty fixed jib insert NO.0908A x1Length 6.08mWidth 1.01mHeight 0.97mWeight 0.60tHeavy-duty fixed jib base NO 2316A x1Length 4.42mWidth 2.42mHeight 1.79mWeight 1.60tUpper counterweight tray ×4Length 7.16mWidth 2.20mHeight 0.64mWeight 16.00tCentral counterweight tray ×2Length 5.48m Width 1.72m Height 0.41m Weight 12.50t
Transport Dimensions
A
SCC8300
SCC8300 crawler crane
A
11
Transport Dimensions
Counterweight block ×18Length 2.00mWidth 2.20m Height 0.52mWeight 8.00t300t hook block ×1Length 2.93m Width 1.02m Height 1.39m Weight 6.20t150t hook block ×1Length 2.55mWidth 1.00mHeight 0.78mWeight 3.76t100t hook block ×2Length 2.38mWidth 1.00mHeight 0.70mWeight 3.21t50t hook block x1Length 2.20m Width 1.00m Height 0.47m Weight 2.39t
Transport Dimensions
A SCC8300 crawler crane
SCC8300
A
12
15t hook ball x1Length 1.30mWidth 0.50m Height 0.50mWeight 1.00tTrolley x1Length 2.56mWidth 1.74m Height 1.00mWeight 1.00t
Transport Dimensions
Notes:(1) The transport dimensions of the parts are marked on schematic diagrams, but not drawn by scale; the dimensions indicated are the design values excluding package.(2) The weight is the design value and there may be difference due to the manufacturing error.
Transport Dimensions
A
SCC8300
SCC8300 crawler crane
A
13
Transport Dimensions
(62m
+66
m) M
ain
Boo
m +
Luf
fing
Jib
Trai
ler L
oad
out S
umm
ary
Nam
eW
t.(t)
12
34
56
78
910
1112
1314
1516
Bas
ic m
achi
ne45
.00
1
Cra
wle
r ass
embl
y25
.00
11
Rea
r cou
nter
wei
ght t
ray
16.0
0 1
Cen
tral c
ount
erw
eigh
t tra
y12
.50
11
Cou
nter
wei
ght b
lock
8.00
1
12
22
22
22
11
Boo
m b
ase
16.9
0 1
3m b
oom
inse
rt1.
35
1
6m b
oom
inse
rt2.
24
1
12m
boo
m in
sert
3.93
1
11
Boo
m ti
p6.
86
1
Luffi
ng ji
b ba
se w
ith m
asts
8.60
1
6M lu
ffing
jib
inse
rt1.
42
2
12M
luffi
ng ji
b in
sert
2.48
1
11
Luffi
ng ji
b tip
4.44
1
Ext
ensi
on a
rm0.
64
1
150T
Hoo
k3.
76
1
100T
Hoo
k3.
21
1
50T
Hoo
k2.
36
1
15T
Hoo
k ba
ll1.
00
1
Trol
ley
1.00
1
Wei
ght e
ach
traile
r(t)
4525
2518
.820
.520
.519
.919
.919
.920
.818
.519
.520
.420
.919
.819
.9
Transport Dimensions
B
B
SCC8300 crawler crane
19SCC8300
B20 Superworks
22 Lowerworks
23 Attachment
24 Safety Devices
B
B
SCC8300 crawler crane
20 SCC8300
Superworks
■ Engine Cummins QSM11 Tier 3 diesel engine with rated power of 298kW (400 hp)/1800 rpm and rated torque output 1898N•m/1400 rpm. Cummins QSM11 Tier 4 diesel engine is optional.
Engine block heater (120V), intake manifold grid heaters, high silencing muffler, radiator and fan. It has a distributor box (1 splitting to 3) and hydraulic pumps.
Two 12 volt maintenance-free batteries, 1400 CCA at -18°C (0°F), 24 volt system and 100 amp alternator.
One 1050L diesel fuel tank.
Engine monitoring displays the water temperature, fuel level, engine hours, oil pressure, engine speed, charging status of battery, and voltage.
■ Control System
Advanced SYMC (Sany Motion Controller), rated capacity limiter (RCL) and CCTV (Closed Circuit TV) monitoring system are used. The RCL display (8.4″), CCTV display (7″), integrated instrument display (8″), etc., is readily visible to the operator. CAN bus is used to transfer data among the controllers, displays, operating handles, engine and RCL.
■ Control Operation
Sany proprietary RCL detects load weight, boom angle, rated load, working radius, tip height, etc. Composition: 8.4″ screen display, basic machine, angle sensor, pull sensor.
Camera monitors present operating conditions, operating parameters of all monitored spots and alarming;
Three operation joysticks are located on the left and right pods with functions switched by pressing the buttons on them and displayed in real time on the monitor screen of the instrument panel.
Three-color light on top of the cab describe capacity by different colors: Green for 0-90% rated load; Yellow for 90-100% rated load; Red for over 100% rated load.
CCTV Monitoring System: The operator can monitor conditions of all winches and surroundings. Five cameras in total: 2 on the rear of rotating bed, 1 for luffing and jib luffing winches, 1 for main hoist winch and 1 for auxiliary hoist winch.
Fault Diagnosis Support System: The operator can use this system to find the fault code and use it to find out the exact fault.
Data Recorder: It records all the operation and equipment running data.
Swing & Travel Alarm: It provides audio and visual alarm during swing & travel.
Emergency Stop Button: Under emergency, press down the button to set brake to the hoisting, luffing, slewing and traveling actions and stop the engine.
■ Alarm
All the alerting information including wind speed, water temperature, oil temperature, oil volume, oil pressure, working hour, engine revolution will be displayed on the monitors inside cab.
■ Hydraulic System
The hydraulic system includes: hoisting system, travel system, swing system, luff ing system, backstay system, cooling system, auxiliary hydraulic
Specifications
B
B
SCC8300 crawler crane
21SCC8300
Name
Wire rope
diameter (mm)
Wire rope
length (mm)
Rated single rope pull (T)
Max. line
speed (m/min)
Main Hoist Drum 28 710 15 142
Aux. Hoist Drum 28 540 15 141
Wire rope length of main luffing
550m
Name
Wire rope
diameter (mm)
Wire rope
length (mm)
Rated single rope pull (T)
Max. line
speed (m/min)
Main Luffing Mechanism
26 360 19 132
Aux. Luffing Mechanism
20 410 8 128
Specifications
system, and servo hydraulic system.
Open loop circuit for main system and close loop circuit for swing system. Automatic load centering function. Electric-over-hydraulic control components are used. Micro-motion control available. Three 800L oil return filters with multiple pressure alarm, filter plugging alarm, and counterbalance valve for each open circuit motor. 850L hydraulic reservoir with two 120-volt, 1.5kw heaters.
Oil-pneumatic cylinders for backstay; compression extent in proportion to backstay force; maximum backstay force for main boom is 41t and maximum backstay force for front strut of luffing jib is 31t.
■ Main and Aux. Hoist Drums (W1 & W2) The displacement hydraulic motor drives the planet gear speed reducer to raise and lower the load.
The winch speed is infinitely adjustable between 0-140 m/min. Has superior micro-motion control; control on rope cross-over ensures smooth multi-layer winding of ropes, and the reducer is built-in to save space, boasting low noise, high efficiency, and long life.
■ Luffing Mechanism Boom hoist and jib luffing with control on cross-over, Built-in reducer, closed circuit, switch-over valve for power supply for compound actions; infinite adjustable control to ensure sound micro-motion.
■ Swing Mechanism Swing is driven by a single motor with large displacement and planetary gear reducer, automatic load centering and 360°rotation. The maximum swing speed is 1.85rev/min.
Handle in neutral position with zero speed engage the brake and lock swing; also available through rocker switch.
A swing brake release pedal allows the crane to swing when centering over the load.
The rotating bed is mounted on a triple-row roller bearing turntable.
■ Counterweight Carbody counterweight:
57t, 4 counterweight blocks, 2 trays
Upperworks counterweight:
128t, 14 counterweight blocks, 1 tray
B
B
SCC8300 crawler crane
22 SCC8300
Lowerworks
■ Crawler shoe Of 1,130mm wide, the crawler is tensioned with a hydraulic cylinder and held in place by a quantity of shims.
■ Carbody High-strength steel frame structure. Hydraulic cylinder drives power pin.
■ Travel speed
Variable displacement motor realizes two speed shifts. High speed: 0-1.3km/h; low speed 0-0.5km/h; Infinite adjustment for both.
Series 1
Qty. Item Unit Weight Rated single rope pull (T)
8 Counterweight block 8.0 64.0
1Upperworks
counterweight tray
16.0 16.0
Series 1 Total 80.0
Add For Series 2 Optional
Qty. ItemUnit Weight
(t)T otal weight
(t)
4 Counterweight block (Carbody) 8.0 32.0
2Carbody
counterweight tray
12.5 25.0
6 Counterweight block 8.0 48.0
Series 2 Total 185.0
■ Ultra Cab All-enclosed steel frame structure; reinforced glass is installed at the front and back; GE structural plates are installed on the top, providing good light transmission, high strength and high abrasion resistance, and low indoor noise (below 85dB).
Inside the cab are installed the control device, detection instruments, fire extinguisher and alarm device, and CCTV monitoring system, etc. One 24V USB port, Ergonomic design, Broad view with maximum elevation of 25°.
Specifications
B
B
SCC8300 crawler crane
23SCC8300
High-strength steel tube and plates for booms and supporting attachments; sheaves on top of boom are cast iron structure, sheaves on top of jib are plastic. Four handling ears on the boom and the plastic stackers make the operating process more convenient.■ No. 2825A Heavy Lift Boom Tubular lattice boom structure, the top and base sections are reinforced with steel plates.The basic boom is 20 m long consisting of 10 m base section, 3 m insert, and 7 m top section. Steel boom suspension straps are utilized.Optional boom sections include: 6m and 12 m boom inserts to reach a maximum of 92 m.Optional: 2.5m boom tip extension, fits 2825A boom tip and 2316A luffing jib tip.■ Optional No. 2825A/2316A Combination BoomLength ranges from 64m to 112m.Basic boom sections include: 10m No.2825 boom butt, 3m No.2825A insert, 6m No.2825A insert, 12m No.2825A insert, 12m No.2825A/No.2316A transition insert, 9m No.2316A jib top, one for each. Add 6m No.2316A insert and 12m No.2316A insert to achieve length from 64m to 112m.■ Moving Mast Gantry-style support made of high-strength steel and reinforced by beam in the middle.■ Fixed JibTubular lattice boom structure.Three types: Regular, Heavy and Light.■ I Optional No.1412A Regular Fixed JibLength from 13m to 42m. All components can fit into a 40 feet long open-top container. Some attachments are common use with other Sany cranes.Composition: 6.5m fixed jib butt, 6m insert , 11.5m insert, 6.5m jib top. Three o f fse t ang les w i th No.2825A boom: 10°/20°/30°.
Attachments
■ II Optional No.2316A Heavy (Vessel) Fixed JibLength from 12m to 18m. The 3 m fixed jib butt and strut can be transported together.Composition: 3m fixed jib butt, optional 6m luffing jib insert, 9m luffing jib top.Three o f fse t ang les w i th No.2825A boom: 10°/15°/20°.■ III Option No.0908A Light Fixed JibLength from 13m to 37m. It is mainly mounted on the combination boom and luffing jib.Composition: 5m fixed jib butt, 3m insert, optional 6m inserts, 5m fixed jib top.Three offset angles with No. 2316A jib: 10°/20°/30°.■ Optional Luffing JibTubular lattice boom structureLength of No.2316A luffing jib from 18m to 66m.Compostion: 9m luffing jib butt, optional 6 and 12 m inserts, 9m luffing jib top. ■ Optional Hooks All hooks are equipped with a latch
Hook name
Max. hoisting Qty. No of
SheavesLine Part
Unit Weight
(T)
300T Hook Block
300 1 11 20 6.05
150T Hook Block
150 1 5 10 3.77
100T Hook Block
100 1 3 7 3.24
50T Hook Block
50 1 1 3 1.42
15T Hook Ball
15 1 1 1 1.00
Specifications
B
B
SCC8300 crawler crane
24 SCC8300
■ Anti-Two Block (ATB)When the boom and jib reach a certain angle, the corresponding limit switch gets actuated to make the buzzer give alarms; meanwhile, the boom or jib stops lifting. Only lowering is allowed.
■ 3-Wrap ProtectionWhen only three reels are left on the drum, the wire rope detector gives signals to stop lowering of the hook and alert through buzzer and display within the cab.
■ Assembly/Working Mode SwitchTwo modes, assembly and working mode, are available to the crane.
■ Boom LimitWhen boom and jib reaches maximum allowed angle, corresponding limit switches will be activated to alert through buzzer, stop boom movement.
■ Winch BrakeAll winch brakes are spring-loaded normally engaged, hydraulically released wet disc brakes.
■ Aircraft Warning LightA light installed on top of boom, standard equipment.
■ AnemometerIt is mounted on top of boom. The data will be presented on screen within the cab.
■ Level Indicator (Inclinometer)Levelness of the crane is shown live on screen.
■ Function Cut-outNone of the functions are responsive when the function cut-out handle is lowered; only by pulling the
Safety Devices
handles can operator activate any function.
Engine Output Limit Adjustment and Stall Protection
The controller monitors the engine output to prevent the engine from stalling.
■ Emergency Operating SystemThe independent emergency operating box is connected to solenoid valve via connector. It ensures all the main operations like hoisting, luffing, slewing, and other operations in case of emergency.
■ Optional Remote Monitoring SystemGPS performs real-time monitoring of the crane; provides remote fault diagnostics.
Specifications
YEARSIN AUSTRALIA
1938-2018
Western RegionPerth (South Guildford), WAPh: 08 9230 0500Email: [email protected]
Karratha, WAPh: 08 9143 0089Email: [email protected]
Northern RegionDarwin (Berrimah), NTPh: 08 8924 1333Email: [email protected]
Eastern RegionBrisbane (Ormeau), QLDPh: 07 5540 8700Email: [email protected]
Sydney (Sydney Olympic Park), NSWPh: 02 9646 6000Email: [email protected]
Melbourne (Dandenong), VICPh: 03 9554 0300Email: [email protected]
Hunter RegionMuswellbrook, NSWPh: 02 6541 6444Email: [email protected]
Onlinewww.tuttbryant.com.au
Tutt Bryant Heavy Lift & Shift Locations
Singleton
Sydney
Brisbane
Melbourne
Perth
Karratha
South Guidlford
Darwin
Muswellbrook
Ormeau
Dandenong
Naval Base
Olympic Park
Berrimah