sb06-06-r3
DESCRIPTION
doosanTRANSCRIPT
-
THIS BULLETIN THIS BULLETIN THIS BULLETIN THIS BULLETIN IS A REVISIONIS A REVISIONIS A REVISIONIS A REVISION OF OF OF OF SB06SB06SB06SB06----06060606----RRRR2222 (Dated 0 (Dated 0 (Dated 0 (Dated 03333////20202020/0/0/0/08888)))) andandandand SB06SB06SB06SB06----06060606----R1 (Dated 02/14/08)R1 (Dated 02/14/08)R1 (Dated 02/14/08)R1 (Dated 02/14/08) Models Affected:Models Affected:Models Affected:Models Affected: Mega V Wheel Loaders DL Wheel Loaders Solar V Excavators DX Excavators
IssueIssueIssueIssue: : : : Clarification of Electronic Troubleshooting Tools Needed for Servicing Doosan
Equipment
The packages below are electronic troubleshooting, testing and calibration tools needed to properly service several Doosan Infracore heavy equipment products. The following tools are essential to properly service our products.
Service Managers
04/18/08 Electronic Test Tools for Doosan Wheel Loaders and Excavators
SB06-06-R3
-
00004444////18181818/08/08/08/08 SBSBSBSB00006666----00006666----RRRR3333
2222
EXCAVATORS
PART NAMEPART NAMEPART NAMEPART NAME PART NO.PART NO.PART NO.PART NO. MODELSMODELSMODELSMODELS REMARKSREMARKSREMARKSREMARKS
SMS (Solar Monitoring Software)
543-00087 Solar Excavators with Tier II Engine
The components in this package plug into the EPOS controller. Kit includes:Kit includes:Kit includes:Kit includes:
Software Disk 1 Short Cable 1 Long Cable
SMS 2000 Length Cable
530-00310 Solar Excavators with Tier II Engine
Replacement or additional short cable for SMS kit.
SMS 4000 Length Cable
530-00294 Solar Excavators with Tier II Engine
Replacement or additional long cable for SMS kit.
DMS (DX Monitoring Software)
K9001696 DX Excavators
The components in this package plug into the EPOS controller. Kit includes:Kit includes:Kit includes:Kit includes:
Software Disk 1 Cable
DMS Cable K1007965 DX Excavators Replacement or additional long cable for DMS kit.
WHEEL LOADERS PART NAMEPART NAMEPART NAMEPART NAME PART NO.PART NO.PART NO.PART NO. MODELSMODELSMODELSMODELS REMARKSREMARKSREMARKSREMARKS
ZF Testman Pro (Mega V and DL Software Kit)
5870-220-010
Mega V Wheel Loaders Tier II and All DL Wheel Loaders
This package is used to check the ZF transmission sensors, outputs and inputs. Kit includes:Kit includes:Kit includes:Kit includes:
Software Disk 1 Test Box USB Cable RS232 Cable Diagnosis Connection Cable
universal 9-pin Diagnosis Connection Adapter
universal 9 -> 6 -> 3-pin Instruction Booklet
AEB Starter (Diagnostic tool for ZF Transmission Recalibration)
0501-211-778
Mega V Wheel Loaders Tier II and All DL Wheel Loaders
See Service Bulletin SB05Service Bulletin SB05Service Bulletin SB05Service Bulletin SB05----03030303 for detailed instructions for using the AEB Starter.
-
00004444////18181818/08/08/08/08 SBSBSBSB00006666----00006666----RRRR3333
3333
ELECTRONIC INJECTION ENGINES PART NAMEPART NAMEPART NAMEPART NAME PART NO.PART NO.PART NO.PART NO. MODELSMODELSMODELSMODELS REMARKSREMARKSREMARKSREMARKS
E-Doctor (Diagnostic Kit for Electronic Injection Engines)
K9001683
All DX Excavators All DL Wheel Loaders with Doosan Engines
This program reads performances and evaluates the engines used in DX and DL models. NOTE:NOTE:NOTE:NOTE: Dealers must call the Dealers must call the Dealers must call the Dealers must call the Doosan Service Department Doosan Service Department Doosan Service Department Doosan Service Department at at at at 770/831770/831770/831770/831----2278 2278 2278 2278 to get a code to get a code to get a code to get a code number, ID and panumber, ID and panumber, ID and panumber, ID and password. ssword. ssword. ssword. Kit includes:Kit includes:Kit includes:Kit includes:
Software Disk Gateway Module Main Harness Module-14
pin USB Port Cable Module /
Laptop Serial Port Cable Module /
Laptop 14 Pin Harness Main
Harness / Check Port
Minimum Computer RequirementsMinimum Computer RequirementsMinimum Computer RequirementsMinimum Computer Requirements
1. Laptop computer with color monitor 2. Intel Pentium M processor 3. 512 MB Ram 4. 20 GB Hard Drive 5. DVD/CD-ROM Drive 6. Serial Port 7. USB Port 8. Ethernet Port 9. Microsoft Windows XP Professional 10. Note: Microsoft Vista can now be used however, users must contact the Doosan
Service Department at 770/831-2278 for parameter settings.