Saving TI-83List Data to a Program File

© 2002 Jerel L. Welker, Lincoln High SchoolPermission is granted to copy and distributewith copyright notation attached.

Saving TI-83 Lists to a Program

Step 1: Create a New Program

Press PRGM and arrow over to NEWPress ENTER and name the file in alpha mode.

Use the Alpha keys to enter a program name.

Press ENTER after the last character. (The maximum number of characters is eight.)

Saving TI-83 Lists to a Program

Step 1: Store Data from L1

Press RCL (2nd STO)Choose L1 (2nd 1)

Press ENTER to recall the data from L1 and place it on the command line.

Press the STO key followed by L1. When run, the program

will store the data to L1

Saving TI-83 Lists to a Program

Step 2: Store Data from L2

Press RCL (2nd STO)Choose L2 (2nd 2)

Press ENTER to recall the data from L2 and place it on the command line.

Press the STO key followed by L2. When run, the program

will store the data to L2

Saving TI-83 Lists to a Program

Step 3: Repeat for any other lists

Step 4: Press QUIT (2nd MODE) to end storing data and return to the HOME screen. Your data is now safely stored.

Restoring Data from a Program to a List Step 1: Press PRGM and select

the program which stores the data. Press ENTER.Step 2: Press ENTER to execute the program.

Step 3: The data has been stored in the list. Use a Stat-Plot to graph.