savant indoor base station: tel-bst11 technical... · the savant indoor base station (tel-bst11) is...
TRANSCRIPT
1 of 4
Description
The Savant Indoor Base Station (TEL-BST11) is a DECT-over-IP base station (access point) used along with the Savant DECT IP wireless handsets (TEL-HSTW01) in the Savant telephony architecture. It provides seamless roaming and handover between base stations.
The indoor DECT base station is the Radio Fixed Part (RFP) for the SIP-DECT handset solution and are directly connected to the local area network (LAN).
The TEL-BST11 enables complete integration of DECT radio networks into the IP infrastructure of the Savant Telephony solution. It is powered either by an optional power supply unit (TEL-BSTPWR) or by Power over Ethernet (PoE).
The TEL-BST11 supports up to 72 DECT wireless handsets in the Savant Telephony architecture, and up to 8 simultaneous calls per base station.
The TEL-BST11 is connected directly to the LAN like a VoIP device and uses the benefits of established DECT technology for radio transmission. This ensures full compatibility with cordless DECT terminals, which are available as system telephones and standard Generic Access Profile (GAP) terminals.
The VoIP solution is particularly suitable for branch offices that are connected to a company’s headquarters via IP routes. The integrated mobile handsets act as normal company extensions, which means that staff can always be reached on their telephone number, regardless of whether they are currently in headquarters or one of the branch offices.
View of TEL-BST11
Feature Summary
• All 120 (in North America 60) DECT channels supported for maximum use of DECT capacity
• Eight simultaneous voice channels per base station, four additional channels for handover
• Generic Access Profile (GAP) standard supported
• Connection handover in line with the GAP standard
• DECT Standard Authentication Algorithm (DSAA ) between base and handset
• Support of DECT encryption
• Cordless system telephones can use all features offered by the OpenCom 100, 1000 and SIP-DECT
• Integrated DECT antenna
• 3 LEDs signalling the current operating state
• Central system journal
• Central cluster administration
• Wiring alternatively from below (cable duct) or from above (suspended ceiling)
• Connection via Ethernet 100 BaseT
• Power supply in line with Power over Ethernet standard IEEE 802.3af
• Supports IPv4
• Use RacePoint Blueprint™ design tool, Savant Configurator and Open Mobility Manager to configure and customize TEL-BST11
Savant Indoor Base Station: TEL-BST11
020613 009-‐0653-‐00
2 of 4
SpecificationsEnvironmentalEnvironmental
Temperature Opera&ng: 23° to 113° F (-5° to 45° C) Storage: -40° to 158° F (-40° to 70° C)
Humidity 5% to 95% RH (non-condensing)
Dimensions and WeightDimensions and WeightHeight 7.87 in / 200 mmWidth 7.68 in / 195 mmDepth 1.18 in / 30 mmWeight 14.7 oz / 417 g (without AC adapter)Power Power
Power over Ethernet RJ-45 10/100 Base-T, Power over Ethernet using the PoE IEEE 802.3af standard.
Optional Supply 230 V AC Power Consumption 120 mAIngress Protection IP 20ComplianceComplianceSafety and Emissions FCC Part 15 | CE Mark | 73/23/EECRoHS CompliantEthernetEthernet
• Connection via Ethernet 100/1000 BaseT• Supports IPv4• Connection via Ethernet 100/1000 BaseT• Supports IPv4
VoIPVoIP• VoIP connection using Real-time Transport Protocol (RTP) / RTP Control Protocol (RTCP)• G.711 / G.722 / G.729AB codec depending on required voice quality and available bandwidth• Quality of service supported by DiffServ/Type of Service (ToS) Flag• Adaptive jitter compensation• Echo cancellation / suppression• Voice activity detection and comfort noise generator
• VoIP connection using Real-time Transport Protocol (RTP) / RTP Control Protocol (RTCP)• G.711 / G.722 / G.729AB codec depending on required voice quality and available bandwidth• Quality of service supported by DiffServ/Type of Service (ToS) Flag• Adaptive jitter compensation• Echo cancellation / suppression• Voice activity detection and comfort noise generator
LEDsLEDs
LEDs are available for diagnostic purposes. See the Savant Telephony Solution Deployment Guide for details.LEDs are available for diagnostic purposes. See the Savant Telephony Solution Deployment Guide for details.
MountingMounting
Wall mountableWall mountable
EnclosureEnclosure
Flame-resistant plastic (UL94 VO-5VB) | Color: Ice GreyFlame-resistant plastic (UL94 VO-5VB) | Color: Ice Grey
Savant Indoor Base Station: TEL-BST11
020613 009-‐0653-‐00
3 of 4
Included ItemsThe individual components included with the Savant indoor base station (TEL-BST11) are outlined in the next table.
Description QuantityWall Mount Drilling Template 1
Screws and Anchors for Wall Mounting 2 each
Required System ComponentsThe system components required for use with the TEL-BST11 are outlined in the next table.
Description Model NumberEthernet Network Enterprise-grade network deployment
Savant PBX SPX-1000
Optional AccessoriesThe optional accessories available for use with the TEL-BST11 are outlined in the next table.
Description ModelEntry-Level Wired Phone TEL-HST01
High End Wired Phone TEL-HST02
Universal Power Supply for Desktop Handsets TEL-HSTPWR
Wireless Phone TEL-HSTW01
Indoor Base Station (international) TEL-BST01i
Universal Power Supply for Indoor Base Station TEL-BSTPWR
Outdoor Base Station TEL-BST12
Outdoor Base Station (international) TEL-BST02i
Antenna for International Outdoor Base Station TEL-BSANT
Wall Mount for Outdoor Base Station TEL-BSTWMT
4-Port VoIP Gateway TEL-GW04
Integrated Access Device TEL-IAD1
Public Announcement System PAS-1000
Universal Power Supply for PAS-1000 TEL-PASPWR
Savant Indoor Base Station: TEL-BST11
020613 009-‐0653-‐00
4 of 4
ConnectionsThe next figure shows the connections on a TEL-BST11. The numbered callouts on the figure are explained in the next table.
12 3
Number Item Description
1 Power Optional power supply: 230 V AC
2 LAN The TEL-BST11 is connected directly to the LAN like a VoIP device, while using the benefits of established DECT technology for radio transmission.
3 USB Reserved for future use.
Savant Indoor Base Station: TEL-BST11
020613 009-‐0653-‐00
Copyright © 2013 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice.