SAS FRICTION MATERIAL

DATA

ALTO PRODUCTS

SAS Friction MaterialDESCRIPTION:

SAS is a (non-asbestos) organic based friction material with impregnated Kevlar fibers. It provides a shudder resistant shift with smooth engagements. It has no squawk or noise during its engagement. SAS Friction Material has a very low Endpoint to Midpoint (E/M) Ratio.

The SAS ingredients provide lubricity, thermal stability, and excellent shifting properties.

SAS Friction Material has superior shift quality, higher torque, and greater durability than the competition.

SAS Friction Material

Application:• Automotive

•Automatic Transmission•Dynamic Shifting Clutch

SAS Friction Material

µPVT Test ResultsHonda DW-1 Fluid

SASµPVT TEST – Honda DW1

LEVEL INLET TEMP° F ° C

FACE PRESSUREKpa Psi

SPEEDm/s RPM

MID DYNCOEFF

END DYNCOEFF

E/M RATIO ST BRKCOEFF

A 122 50 295 43 5 750 0.169 0.169 0.95 0.140

B 122 50 295 43 11 1500 0.168 0.156 0.89 0.130

C 122 50 591 86 5 750 0.159 0.161 1.00 0.140

D 122 50 591 86 11 1500 0.154 0.151 0.97 0.126

E 230 110 295 43 5 750 0.158 0.152 0.90 0.104

F 230 110 295 43 11 1500 0.159 0.137 0.84 0.095

G 230 110 591 86 5 750 0.150 0.149 0.98 0.100

H 230 110 591 86 11 1500 0.150 0.142 0.92 0.091

I 230 110 886 129 19 2700 0.141 0.109 0.76 0.076

J 230 110 886 129 25 3500 0.140 0.106 0.74 0.071

K 230 110 1329 193 19 2700 0.138 0.116 0.83 0.075

L 230 110 1329 193 25 3500 0.135 0.108 0.80 0.075

M 122 50 886 129 19 2700 0.147 0.129 0.86 0.113

N 122 50 886 129 25 3500 0.144 0.115 0.79 0.096

O 122 50 1329 193 19 2700 0.143 0.128 0.89 0.116

P 122 50 1329 193 25 3500 0.140 0.116 0.82 0.099

SASµPVT TEST – Honda DW1

SAS Friction MaterialSAS Friction Material Superior Shift8% Improvement over Brand A 12% Improvement over Brand B

SAS Friction Material

3600 RPM Step Level Test Results

Honda DW-1 Fluid

SASStep Level Test

LEVEL INLET TEMP° F ° C

ENERGY DENSITY KJ/m² ft·lbs/in²

POWER DENSITYKW/m² Hp/in²

MID DYNCOEFF

E/M RATIO ST BRKCOEFF

1 122 50 471 224 943 0.82 0.143 0.97 0.128

2 122 50 562 267 1125 0.97 0.136 0.97 0.121

3 122 50 663 315 1326 1.15 0.135 0.93 0.112

4 122 50 752 358 1504 1.30 0.130 0.91 0.112

5 230 110 825 393 1650 1.43 0.124 0.86 0.085

6 230 110 926 441 1852 1.60 0.116 0.85 0.082

7 230 110 1014 483 2028 1.75 0.108 0.86 0.080

8 230 110 1115 531 2230 1.93 0.107 0.91 0.091

9 230 110 1207 574 2415 2.09

SASStep Level Test – Honda DW1

SAS Friction MaterialSAS Friction Material Superior Torque 5% greater than Brand A 14% greater than Brand B

SAS Friction MaterialSAS Friction Material Superior Durability 9% capacity advantage over Brand A 20% capacity advantage over Brand B

SAS Friction MaterialConclusion:

SAS Friction Material was especially developed and designed for Honda replacement clutches. It provides a shudder resistant shift with smooth engagements. It has no squawk or noise during its engagement. SAS Friction Material has a very low Endpoint to Midpoint (E/M) Ratio.

The SAS ingredients provide lubricity, thermal stability, and excellent shifting properties.

SAS Friction Material has superior shift quality, higher torque, and greater durability than the competition.

For more information visit us AltoUSA.com or callour technical department at 251-368-7777