sargent price book november 1, 2014

8/21/2019 Sargent Price Book November 1, 2014

1/443

GENERAL INFORMATION

GI-1 November1,2014

GI-2 November1,2014

GI-3 November1,2014GI-4 November1,2014

GI-5 November1,2014

GI-6 November1,2014

GI-7 November1,2014

GI-8 November1,2014

GI-9 November1,2014

GI-10 November 1, 2014





























CYLINDERS& KEYING

CK-1 November1,2014

CK-2 November1,2014

CK-3 November1,2014

CK-4 November1,2014

CK-5 November1,2014

CK-6 November1,2014

CK-7 November1,2014

CK-8 November1,2014

CK-9 November1,2014CK-10 November 1, 2014

CK-11 November 1, 2014






CK-17 November 1, 2014CK-18 November 1, 2014




















BOREDLOCKS

BL-1 November1,2014

BL-2 November1,2014

BL-3 November1,2014

BL-4 November1,2014

BL-5 November1,2014

BL-6 November1,2014

BL-7 November1,2014

BL-8 November1,2014

BL-9 November1,2014

BL-10 November 1,2014














BL-24 November 1,2014BL-25 November 1,2014




BL-29 November1,2014



BL-32 November1,2014BL-33 November1,2014

























MORTISE LOCKS

ML-1 November1,2014

ML-2 November1,2014

ML-3 November1,2014

ML-4 November1,2014

ML-5 November1,2014

ML-6 November1,2014

ML-7 November1,2014

ML-8 November1,2014

ML-9 November1,2014

ML-10 November 1, 2014









ML-19 November 1, 2014ML-20 November 1, 2014













































































ML-100 November 1,201



























ML-127 November 1,201ML-128 November 1,201


Checklist Your price book should contain the following dated pages. If any pages are missing, return this list with the missing itemcircled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________

00.Front.Nov2014:Checklist.Ancmt.TOC 8/29/14 12:08 PM Page 1


2/443

MULTI-POINT

LOCKING HARDWARE

MP-1 November 1, 2014

MP-2 November 1, 2014MP-3 November 1, 2014













DOOR CLOSERS/

HOLDERS & STOPS

DC-1 November 1, 2014










HS-1 November 1, 2014

HS-2 November 1, 2014

EXIT DEVICES

ED-1 November 1, 2014





















ED-22 November 1, 2014ED-23 November 1, 2014














ED-37 November 1, 2014ED-38 November 1, 2014





































AUXILIARY LOCKS

AL-1 November 1, 2014








SPECIALTY HARDWARE

SP-1 November 1, 2014



SP-4 November 1, 2014SP-5 November 1, 2014










ELECTRICAL

EL-1 November 1, 2014












PROFILE SERIES

PS-1 November 1, 2014











PS-12 November 1, 2014PS-13 November 1, 2014




Checklist Your price book should contain the following dated pages. If any pages are missing, return this list with the missing itemscircled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________



3/443

Price Book No. 27

EFFECTIVE DATE:

November 1, 2014

THIS PRICE BOOK SUPERSEDES AND TAKES

PRECEDENCE OVER ANY OF OUR PRODUCT

CATALOGS IN TERMS OF PRODUCT AVAILABILITY.

CONTACT SARGENT MANUFACTURING CO. FOR PRICES AND

AVAILABILITY OF NON-STANDARD AND SPECIAL ITEMS NOT

LISTED IN THIS PRICE BOOK

ANNOUNCEMENT

Copyright 2014 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the

express written permission of Sargent Manufacturing Company is prohibited. Contact us at: 800-727-5477 or visit www.intelligentopenings.com

Price Book No. 27 | November 1, 2014



4/443



5/443

General Information

Terms & Conditions GI-1 - GI-5

RGA Policy GI-4

Product Modification GI-5

Limited Warranty GI-6 - GI-7

Finishes GI-8

Merchandising Aids GI-9

Weight Charge - Screw Substitutions GI-10

Master Prefix Listing GI-11 - GI-15

Business Hours & Holiday Schedule GI-16

Who's Who at Sargent GI-17 - GI-20

Ordering Tips GI-21 - GI-23

Order Forms GI-24 - GI-38

Cylinders & Keying

How to Order / Key Control Types CK-1Keying Charges CK-2 - CK-3

Key Charts, Key Wizard Software CK-4

Mortise, Rim Cylinders & Parts CK-5

Rings, Turn Knobs & Mail Box Cylinders CK-6

Cylindrical Lock Cylinders & Parts CK-7

SARGENT XC Series Cylinders CK-8 - CK-9

SARGENT Large Format Interchangeable Core

Cylinders & Old Style Removable Core Cylinders CK-10

SARGENT XC - Large Format IC Core Cylinders CK-11

Small Format Interchangeable Core CK-12

XC - Small Format Interchangeable Core CK-13

Keying Kits, Tools, Gauges, Components CK-14

Keyblanks CK-15 - CK-16

SARGENT Cut Keys/Competitor Keyways CK-17

KESO F1 Security System CK-18 - CK-22

KESO System CK-23 - CK-27

Signature Key System CK-28 - CK-31

Degree Key System CK-32 - CK-37

Bored Locks

How to Order / ANSI Finish & Function Comparison BL-1

T-Zone (11 Line) BL-2 - BL-15

10 Line BL-16 - BL-27

7 Line BL-28 - BL-35

6500 Line BL-36

GX (3 Line) BL-37

DL Series BL-38 - BL-43

RDL Series BL-44 - BL-45



Mortise Locks 7800/8200

How to Order / ANSI Finish & Function Comparison ML-1

8200 Line (levers) ML-2 - ML-37

7800 Line (Knobs) ML-38 - ML-49

8200 Deadlocks ML-50

Distributor Bulk Pack Trim Program ML-51 - ML-54

7800/8200 Lockbodies ML-55

7800/8200 Working Trim Sets ML-56 - ML-67

7800/8200 Assemblies & Parts ML-68 - ML-80

How to Order / ANSI Finish & Function Comparison ML-81

7900 Mortise Lock ML-82 - ML-105

High Security Mortise Lock 9200

How to Order - ANSI Finish & Function Comparison ML-107

9200 & M9200 - Levers ML-108 - ML-115

9200 & M9200 - Knobs ML-115 - ML-123

9200 BHW ML-124 - ML-125

9200 Deadlock, Lockbodies ML-126

9200 Parts ML-127

9200 Inside Trim Set ML-128

9200 Outside Trim Set ML-129

Multipoint Locking Hardware

How to Order - ANSI Finish & Function Comparison MP-1

7000 Series MP-2 - MP-3

AD7000 Series MP-4 - MP-5

WD7000 Series MP-6 - MP-7

ER/ES/ET Lever Control Trim MP-8 - MP-9

7000 Strikes, Locking Slide & Spindle Kits MP-10

Parts MP-11

FM6100 Series MP-12 - MP-13

FM7100 Series MP-14 - MP-15

Door Closers/Holders & StopsHow to Order / ANSI Finish & Function Comparison DC-1

Additional Features DC-2

1431 / 281 / 351 Series DC-3

268, 269, 281 Security Package Closer DC-4421 Cam Action Door Closer DC-4

268, 269, 278 Concealed Closers DC-4

Finish Options DC-5

Arms & Accessories DC-6

Bodies/Covers/Retrofit Kits DC-7

1331 / 1130 Series DC-8

Parts DC-9 - DC-10

Overhead Holders & Stops HS-1

Electromagnetic Holders & Stops HS-2

Exit Devices

How to Order - ANSI Finish & Function Comparison ED-1

20 Series ED-2 - ED-3

30 Series ED-4 - ED-59898 Reversible Stocking Exit ED-6 - ED-7




Trim ED-50 - ED-53

8893/8895 Inactive & Active Push Bars ED-54 - ED-55

Mullions & Accessories ED-56 - ED-60

Parts ED-61 - ED-74

TOC-1

TABLE OF CONTENTS

HOLDERS & STOPS






6/443

Auxiliary Locks

460-470 SSL1 Series AL-1

480 Series AL-2

4870 Series AL-3

460-480-4870 Strikes & Parts AL-4

4870 Parts AL-5

Locker, Utility, & Cabinet Locks AL-6

758 Padlock & Parts AL-7

858 Padlock & Parts AL-8

Specialty Hardware

HP Series Tubular Lock with Push/Pull (ALP)

Trim & Options SP-1

114/115 Series with Push/Pull Trim& Options SP-2

114/115 Push/Pull Parts SP-3

8200 Series PUSH/PULL Trim (ALP) Options SP-48200 Series PUSH/PULL Trim (ALP) SP-5

8200 Series BHL Trim Options SP-6

8200 Series BHL Trim SP-7

8200 Series BHW Trim Options SP-8

8200 Series BHW Trim SP-9

7800 Series Push/Pull Trim(PT) Options SP-10

7800 Series Push/Pull Trim(PT) SP-11

7800 Series BHD Trim Options SP-12

7800 Series BHD Trim SP-13

7800 Series BHD IS and OS Trim SP-14

Electrical

Electro-Mechanical Locksets EL-1

Electro-Mechanical Exits EL-2

ElectroLynx / Wiring Diagram Service EL-3Electronic Accessories EL-4 - EL-7

Alarms - 5100/5800 EL-8 - EL-9

Fire Guard Door Closers EL-10

Parts EL-11 - EL-12

Profile Series - Stand Alone Products

How to Order / ANSI Finish & Function Comparison PS-1

10 Line Cylindrical Lock - KP, G1, RF PS-2 - PS-3

8200 Series Mortise Lock - KP, G1, RF PS-4 - PS-7

80 Series - Exit Device - KP, G1, RF PS-8 - PS-9

Accessories PS-10

Parts & Accessories PS-11

10 Line Parts & Accessories PS-12

8200 Series Parts & Accessories PS-13 - PS-14

80 Series Trim & Trim Kits PS-1580 Series Parts & Accessories PS-16


TOC-2

TABLE OF CONTENTS


express written permission of Sargent Manufacturing Company is prohibited.Contact us at: 800-727-5477 or visit www.intelligentopenings.com



7/443

GENERAL INFORMATION

TABLE OF CONTENTS

Price Book No. 27| November 1, 2014



GENERAL INFORMATION

Terms and Conditions ...............................................................GI-1





Limited Warranty........................................................................GI-6

Limited Warranty........................................................................GI-7

Finishes .....................................................................................GI-8

Merchandising Aids ...................................................................GI-9

Weight Chart - Screw Substitutions ........................................GI-10

Master Option Listing (1-26)....................................................GI-11

Master Option Listing (28-65737P) .........................................GI-12

Master Option Listing (68-83)..................................................GI-13

Master Option Listing (84-SC).................................................GI-14

Master Option Listing (SE-WS)...............................................GI-15

Business Hours, Holiday Schedule, Website Information .......GI-16

Who's Who at SARGENT........................................................GI-17




Ordering Tips and SARGENT Key Systems Security Policy......GI-21

Ordering Tips and Keying Authorization Documentation ........GI-22

Ordering Tips ...........................................................................GI-23

SARGENT Order Lead Sheet Check List ...............................GI-24

Keying Order Form..................................................................GI-25



Locksets Order Form...............................................................GI-28

Exit Devices Order Form.........................................................GI-29

Door Closers Order Form........................................................GI-30

Miscellaneous Items Order Form............................................GI-31

Signature Series Order Form..................................................GI-32

KESO Authorized Signature Form ..........................................GI-33

KESO Authorization Form.......................................................GI-34

KESO 24 Hour Key Order Form..............................................GI-35

Key Wizard Registration Form.............................................GI-36

Degree System Information Document ...............................GI-37

Degree DG1, DG2, DG3Required Administrative Documents.......................................GI-38

01.GI.Nov2014:General Information 8/29/14 11:13 AM Page 1


8/443



9/443

GI-1

GENERAL INFORMATION

TERMS & CONDITIONS




AcceptanceSARGENTreserves the right to decline an order, in whole or in part, when the type or quantity of goods or creditworthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion.

Purchase Orders, QUOTE requests, Acknowledgements or the like issued by the Purchaser that have contrary standardterms and conditions are not binding on SARGENT, unless such terms and conditions are approved in a separatewritten agreement by SARGENTs authorized representatives. In the event of an acceptance of Purchasers PurchaseOrder by SARGENT, the Purchaser agrees that such acceptance is solely conditioned on Purchasers acceptance ofthe terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the PurchasersPurchase order. The terms and conditions in Purchasers Purchase order which conflict with terms and conditions of thisinstrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreementbetween SARGENTand the Purchaser.

In the event that SARGENTdoes not enforce or require strict performance of any term or condition hereof, or of anyother document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement ofstrict performance will not waive, affect or diminish any right of SARGENTto enforce or require strict performanceof such term or condition in the future.

PricesAll prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effectat the time of order acceptance.

Possession of this price list does not constitute an agreement to sell.

We reserve the right to correct clerical, stenographic and other obvious errors at any time.

Terms:2% tenth net 30 days after statement date.

It is understood that SARGENT may impose and charge a finance charge which is the lesser or one and one-halfpercent (1-1/2%) per month or the highest rate allowed by law on any amount which becomes past due and delinquent.Additionally the Customer shall be responsible for all collection costs, court costs and reasonable attorneys fees (whereallowed by law) in connection with the recovery of any delinquent amount.

FreightAll orders are shipped FOB factory/warehouse, except as expressly provided below. When delivered to the TransportationCompany, the Purchaser assumes the risk of loss or damage in transit.

Customer orders with net product value in excess of $12,000.00 will be shipped prepaid by SARGENTs carrier of choiceto a single destination point in the United States.

Customer orders with net product value less than $12,000.00 will be shipped prepaid by SARGENTs carrier of choice andfreight and handling charges will be added to the customers invoice.

A minimum freight and handling charge of $15 will be charged on orders with net product value of $400 or less.The mini-mum freight and handling charge will not apply to orders for only Cut (bitted) keys of any type, Master keys, Master keyedcylinders or padlocks and factory generated bitting lists that do not have any other product types included on the order.Freight on these orders will be charged as the percentage of invoice value.

For orders with net product value greater than $400 and less than $12,000, freight charges will be calculated as a per-

centage of the net invoice value and will be added to Customers invoice. The percentage is based on the National U.S.Average On Highway Diesel Fuel Prices as reported by the US Department of Energy in effect at the beginning of eachquarter. On the first Monday of each quarter, the new rate will be published on the SARGENT and Door SecuritySolutions extranet and will go into effect on the 2nd Monday of the quarter. Please refer to the Sargent distributorextranet for the rate chart and information on the current freight charge percentage. The percentage in effect at the timeof shipment of the order will be charged.

Great Grand Master keys, Grand Master keys, Master keys, Construction Master keys, Control Keys, Lot Day Keys whichare shipped separate from customer order for security reasons, on orders with total net product value in excess of$12,000.00 will be shipped prepaid by SARGENTs carrier of choice. If the total order value is less than $12,000, the shippingcharges will be added to Customers invoice.



10/443




GI-2

GENERAL INFORMATION

TERMS & CONDITIONS

If a customer provides their own freight account # or freight collect for the freight charges, SARGENT will apply ahandling fee of $25 to the invoice.

Turbo Orders All 1-Week Turbo orders are guaranteed to ship from SARGENT 5 working days after receipt of allinformation necessary to process order or SARGENT will pay freight costs. If Turbo is held for credit reasons SARGENTwill not be responsible for freight costs.

Expedited shipping options If the customer requests an expedited method of shipment such as Next Day Air thecharges will be prepaid by SARGENT and the full rate for the service, as published by the carrier, will be added to thecustomers invoice.

Packing SARGENT will pack, mark and ship the products according to its standard procedures for shipment, unless theparties agree, in writing, that SARGENT will comply with any special instructions provided by the customer. Specialinstructions must be submitted, in writing, at time of order placement. Compliance with special instructions may result inan increased price.

Minimum Invoice:Minimum order value for complete product is $250 net product value. The minimum order value for parts orders is$100 net product value. In the event that the net product value does not meet the required net minimum, Sargentmay, at its sole discretion (a) apply a minimum order charge, (b) reject the order or (c) waive the minimum require-ment provided that the waiver of the requirement for one order shall not constitute a waiver of the requirement forany future orders.

The following products are exempt from this policy: Cut (bitted) keys of any type, Master keys, Master keyed cylindersor padlocks and factory generated bitting lists.

Quotations:Complete shipment of the order must be accepted by Purchaser within normal shipping lead times.

The QUOTE number must be referenced on the order.

Any invoiced order that has the incorrect discount applied to it and did not have a QUOTE copy attached to the orderor the QUOTE number written on the order will have a service fee of $100.00 net DEDUCTED from any sales creditissued for the difference in discount.

The QUOTE is null and void if the Purchase Order does not includeALL product lines listed on the QUOTE or if thequantities for an item covered by the QUOTE deviate by 10% or more.

With the issuance and acceptance of a QUOTE for the purchase of products, the Purchaser agrees that products sopurchased will not be resold or transferred to any Distributor not authorized by SARGENT to sell its products. This would beinclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributors ineligibility forPrice Concession Authorizations, or other actions in SARGENTs discretion.

SARGENTand its sales representatives reserve the right, in their sole discretion and for any reason, to refuse aDistributors request to quote a price other than SARGENTs standard list price and regardless of whether SARGENT

or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders.

Non-Cataloged Products:Products not cataloged or listed in this price book will be considered as special products, and will not be manufacturedwithout prior approval from SARGENT. All non-cataloged goods cannot be changed or cancelled.

A minimum special handling charge of $50.00will be added for non-cataloged product. Any additional labor or materialrequired will be charged accordingly.

Special products require special handling, and therefore standard lead times may not apply. Please consult with yourSales Representative for further details.



11/443

GI-3

GENERAL INFORMATION

TERMS & CONDITIONS




Changes / Cancellation of Orders:Changes or cancellations to an order will result in a charge of costs for material and labor expenses that have beenincurred prior to notification from Customer. If products have already been made and or are located in the shippingroom, the 45% restocking fee will apply. Handling charges are billed on Customers original order.

Suspended Line Items:If a line item is suspended due to insufficient information, we will notify you via Q fax. If a response is not receivedwithin 5 business days of the fax, the item(s) will be cancelled off the order. A new order will need to be placed forthe cancelled item(s).

AddOn Orders to QUOTE:Any new order requesting special pricing to match an existing QUOTE number, which has already been ordered, willbe accepted up to 60 days after the acknowledgement of the original order. All add-on orders must reference the

original factory order number and the corresponding QUOTE number to receive the quoted pricing discount. Add-onorders for stock will not be accepted.

Packaging:Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardwareto be used on a specific hardware project.

Delivery:Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times.Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keyinginformation, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtainingthe necessary information for order processing. Manufacturing lead time will begin once all information is received toprocess an order. SARGENTwill use reasonable efforts to deliver products as estimated, but makes no guaranteesas to delivery dates.

SARGENTwill not be liable for back charges incurred based on availability of product or as a result of delays indelivery caused by insufficient information required to process an order.

SARGENTwill not be held responsible for delays in delivery caused by strikes, fires, floods or any other causesbeyond our control, including the delivery of material to us. Under no circumstances shall SARGENTbe liable oraccountable for consequential damages due to failure of delivery.

Claims:In the event of Company or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders mustbe submitted in writing to Customer Service within thirty (30)days from receipt of material.

Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier.

Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact aSARGENTCustomer Service Representative upon submittal of the order. SARGENTwill obtain requested insuranceand the additional cost will be included on Customers invoice.

Invoice Deduction:A SARGENTSales Representative or Customer Service Representative must be notified of any disputed invoiceswithin sixty60 days from the date of invoice. Deductions should only be taken for the disputed amount and the balanceof the invoice is due and payable within standard payment terms.



12/443

GI-4

GENERAL INFORMATION

TERMS & CONDITIONS




Returned Goods:

It is the policy of SARGENTtonot accept returns of any materials that are correctly furnished as per the DistributorsPurchase Order. Return of product due to customer order error or accommodation must be pre-arranged with SARGENT

and approved in writing by Sales Management.

No Returns Accepted for the following: KESO, Signature, Degree, Keyed Cylinders, Specials, Anything Used, Discontinued,Modified, or Damaged Product, Electrical products, Incomplete Products (e.g. missing keys, levers, roses, etc).

All products returned as Goodwill must meet the following criteria to be considered a return:

Be in original, unmarked, and undamaged cartons. Be valued in excess of $250.00 net. Shipped and invoiced within the previous 120 days.

Custom, non-cataloged goods, master-keyed or SARGENT

Turboship product is not returnable.

A MINIMUMrestocking fee of 45% will be charged. Upon receipt and verification by SARGENTthat the returnedmerchandise meets the foregoing conditions, a credit will be issued for the original invoice amount less the MINIMUM45%restocking fee.

Defective goods and Goodwill products that meet the foregoing criteria, may be returned by fulfilling the following conditions:

Send an RGA request in writing to the SARGENTSales Representative serving the Purchasers area. Ensure the RGA labels that are sent to Purchaser by SARGENT are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty(60)days from the date of RGA issuance date. Return shipments must be freight prepaid to the location specified on the RGA. SARGENTis not liable for

damages or shortages to product during shipping.

Electro Mechanical Defective Product Returns:In addition to the above, the following conditions apply:

Defective product return must be under warranty Case # must be used within 7 days of issuance Returned product must be found defective or nonfunctional upon test at factory Returned product must not have been damaged during installation process

No credit may be taken or issued prior to RGA approval and receipt of product.

All defective goods within the terms of our limited warranty may be returned for credit or replacement.

Taxes:Prices do not include any present or future Federal, State, or Local property, license, privilege, sales, use, excise,gross receipts or other like taxes or assessments, which may result from transactions or any services performed inconnection herewith.

Governing Law:The rights and obligations of the parties shall be governed by the laws of the State of Connecticut, excluding anyconflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shallnot apply to this Agreement.

Limited Warranty:The Terms and Conditions outlined above are subject to SARGENT Limited Warranty, which is included in thisPrice List and incorporated herein by reference.



13/443

GI-5

GENERAL INFORMATION

TERMS & CONDITIONS




Product Modifications:SARGENT products are not designed for or intended for aftermarket modification. The warranty on SARGENT productsbecomes void if the product is modified in any way, regardless of whether the modification causes or contributes to anyalleged defect. Warranty voiding modifications include, but are not limited to, third-party electrification of non-electricproducts and/or the installation of non-approved or non-SARGENT components.

If a SARGENT product is modified it no longer meets industry certification and quality control standards applicable tothe original product and is no longer a genuine SARGENT product. A modified product may not be sold as a SARGENT

product and no SARGENT trademarks or certification marks based on the original SARGENT product, such as U.L.or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructionssold with the modified product.

All original SARGENT packaging and literature carries SARGENT trademarks and must be destroyed if the originalSARGENT product is modified. Portions of the product that carry a SARGENT trademark or certification mark, suchas mortise faceplates, lock bodies, etc. must be discarded and/or replaced by the party making the modification. U.L.

and other certification testing and marking are also the responsibility of the party making modification. The use ofSARGENT trademarks on modified products constitutes trademark infringement.

Fire Rated Openings:Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, andSARGENT makes no representations or warranties concerning what such impact may be in any specific situation.When retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening,please consult with a code specialist or local code official (Authority HavingJurisdiction) to ensure compliance with allapplicable codes and ratings.

Trademark Use Policy:ASSA ABLOY AmericasThe following policy (Policy) of ASSA ABLOY Americas (ASSA ABLOY), and all of its affiliated group companies(collectively, the Group Companies), applies to the use of certain intellectual property of all such Group Companies,including all trademarks, names, logos, product images, and related information (the ASSA ABLOY Marks). ASSAABLOY Marks are proprietary and critical to the success of ASSA ABLOY and the Group Companies, and may onlybe used in strict compliance with this Policy.

This Policy covers any person or entity reselling any product of any Group Company with the consent of such GroupCompany (each, an Approved Reseller). Each Approved Reseller has a non-exclusive right to use certain of theASSA ABLOY Marks relating to any of the Group Companies for which it is an Approved Reseller, subject to thefollowing conditions:

(1) Approved Resellers use of ASSA ABLOY Marks must be truthful, fair, and not misleading;

(2) Approved Resellers advertising must clearly indicate that it is advertising of the Approved Reseller, and is notadvertising of ASSA ABLOY;

(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;

(4) Approved Resellers advertising must not imply or suggest an association between the Approved Reseller andASSA ABLOY other than that of buyer and seller;

(5) Approved Resellers use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the GroupCompanies, and their products;

(6) Approved Resellers trade name must be more predominant on Approved Resellers advertising than the

ASSA ABLOY Marks;(7) Approved Resellers use of ASSA ABLOY Marks must include the trademark symbol or TM, as appropriate,

along with the following trademark legend printed in legible text on the Web page or document containing ASSAABLOY Marks: [describe ASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc.or one of its affiliates in the United States and other countries.;

(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and

(9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is anApproved Reseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Yproducts may use Group Company X trademarks in connection with its sale of Group Company X products, butmay not use Group Company Y trademarks).



14/443




GI-6

GENERAL INFORMATION

LIMITED WARRANTY

ASSA ABLOY reserves the right to review Approved Resellers usage of ASSA ABLOY at any time and may:

(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must beimplemented within 30 days of written notice to Approved Reseller;

(b) condition the use of ASSA ABLOY Marks on ASSA ABLOYs prior approval use, which approval may bewithheld in its sole discretion;

(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason days prior written notice toApproved Reseller; and

(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Reseller in the event ApprovedReseller is in violation of this Policy, or of any agreement with ASSA ABLOY or any Group Company.

Approved Resellers right to use ASSA ABLOY Marks in no way conveys to Approved any proprietary or economicinterest in any ASSA ABLOY Marks.

Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and liabilities. ASSA ABLOY willvigorously enforce this Policy by seeking all appropriate remedies, including, but not limited to, pecuniary damagesand injunctive relief.

TECHNICAL INFORMATION AND ADVICE:(a) All designs, data and specifications provided by company are proprietary and will not be disclosed or reused

by customer without the prior written consent of Company;(b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or dam-

ages incurred, and all such advice is given and accepted at Customer risk.

LIMITED WARRANTY:SARGENTwarrants that its products sold under the SARGENT trade name in the United States of America arefree from defects in workmanship and materials under normal use and service.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance,

improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident,unauthorized service, or use with unauthorized non-SARGENT products or parts.

This warranty is void if any modification is made to the warranty product, regardless of whether the modification causesor contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

The only liability of SARGENT, in tort or contract whether under this warranty or otherwise, shall be limited to therepair or replacement of any product or component part which shall prove defective as covered by this warranty,within the stated time period listed below, after delivery to the original purchaser.

T-Zone (11-Line) Bored-In Lever Lock 10 years

281, 351, 1431, 1331 Series Closer Body 25 years 1130 Series Closer Body 15 years 268, 269, 278, 421 Series Closer Body 10 years 9200/8200/7800 Mortise Lock 10 years

FM6100, FM7100, 10L Bored-In Lever Lock 7 years 7000 Vertical Rod Lock, 7900 Mortise Lock 5 years 80 Series/Exit Trim/90 Series Exit Device, 56- Electric Latch Retraction Option 5 years Overhead Holders & Stops 5 years 7L Bored-In Lever Lock 5 years 8 Line Bored-In Knob Lock 3 years 20/30 Exit Device or Trim 3 years All Electromechanical and Electronic Products 2 years All other SARGENT products 1 year



15/443

GI-7

GENERAL INFORMATION

LIMITED WARRANTY




Warranty for Cylinders Factory or Field Combinated:Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite, molybdenum disulfideor Polylube(trademark) are recommended. Petroleum based liquid lubricants should only be used in cylinders inharsh or corrosive environments and should not be mixed with dry lubricants.

SARGENT cylinders and/or core warranty will be voided if used in non-SARGENT locking devices.

Warranty for Cylinders Field Combinated:1. Keys shall be cut to the SARGENT key bitting specifications required for the particular keyway and depth system.2. All pin lengths shall be selected according to prevailing factory standards.3. Original SARGENT cylinder components, including pin tumblers and key blanks, shall be used.4. We reserve the right to void the warranty if we deem that a malfunction is a result of non-original components

which do not conform to SARGENT standards.

Keying Systems:All bittings shall be originated by the SARGENT Key Systems Department to be compatible with one another in a specifictype of cylinder (conventional, security, high security, interchangeable core, removable core) and within a particularkeying system.

SARGENTwill not pay for the cost of repair performed other than in accordance with this warranty.

SARGENT will not be held responsible in any way for any field generated bitting systems.

Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective ascovered by this warranty. A brief description of the defect will be required. Product will be examined upon return.In theevent such examination reveals a defect covered by this warranty, the product will be repaired or replaced.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW,

ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. SARGENTMANUFACTURINGCOMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALESREPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THISWARRANTY.

SOME STATE DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONSMAY NOT APPLY TO YOU.

THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICHVARY FROM STATE TO STATE.

SARGENTManufacturing Company



16/443

GI-8

GENERAL INFORMATION

FINISH




Finishes

Items will be furnished only in finishes as listed in this price book. Not all finishes are available for all product lines. Consulteach product section for applicable finishes.

SARGENT Symbol BHMA Symbol Material

3 (BHMA 605) Bright brass, clear coated4 (BHMA 606) Satin brass, clear coated9 (BHMA 611) Bright bronze, clear coated10 (BHMA 612) Satin bronze, clear coated10B (BHMA 613) Dark oxidized satin bronze, oil rubbed10BL Dark oxidized satin bronze, clear coated14 (BHMA 618) Bright Nickel, clear coated15 (BHMA 619) Satin Nickel, clear coated20D Statuary bronze dark powder coated26 (BHMA 625) Bright chromium plated26D (BHMA 626) Satin chromium plated32 (BHMA 629) Bright stainless steel32D (BHMA 630) Satin stainless steel

Exposed Metal Parts Furnished same finish as Escutcheon or Rose Bushing

SARGENT Symbol BHMA Symbol Painted Finishes

EB (BHMA 690) Sprayed bronze enamel or polyester powder coated to match finish 10BED (BHMA 693) Sprayed black enamel or polyester powder coated to match finish 20DEN (BHMA 689) Sprayed aluminum enamel or polyester powder coatedEP (BHMA 691) Sprayed bronze enamel or polyester powder coated to match finish 10

EAB (BHMA 696) Brass enamel or polyester powder coated to be used with brass finishesERD Red powder coat

When prime coat is required the EN finish will be furnished as this is suitable for painting.



17/443

GI-9

GENERAL INFORMATION

MERCHANDISING AIDSPrice Book No. 27| November 1, 2014



Cylinder PriceDG-3110 Degree Cylinder Sample Kit $250.00

Bored Lock (Solid Light Oak Block)MSB001 6 and 8 Line Bored Locks And 480 Deadlock 2-3/4" Backset Only $167.00MSB002 6500 / 7 / 10 Line Cylindrical Lock $172.00MSB007 T-Zone (11 Line) and GX (3 Line) Series Bored Lock $172.00MSB014 DL Series $158.007800/8200/8200BHL/9200 Line Locks (Solid Light Oak Block)MSM004 15 FunctionMSM005 05, 24, 25, 45, 50 Functions $182.00MSM003 04 & 37 functionsMSM015 9200 Series $195.00Roseless Trim Locks (Maiman Thermal Fused flush door, Paraon Cherry Block)MSM010 R8237 Roseless $150.00MSM011 Roseless 5 lever $670.00MSB012 RDLU65 Roseless $96.008200 ALP Trim (Maiman Thermal Fused flush door, Gentle Anigre Block)MSB013 HP Series ALP $132.00MSM012 8215 ALPMSM013 8205, 25, 45, 50 ALP $206.00MSM014 8204& 37 ALP

8200 BHW TrimMSM023 PassageMSM024 Cylinder $260.00MSM025 Cylinder and Turn Button4870 Line Locks (Solid Light Oak Block)MSM001 4875/77 SeriesMSM002 4874 Series $168.00MSB009 SSL1114 and 115 Hospital LatchMSB010 Solid Light Oak Block for 2 -3/4" Backset only $146.00Exit Devices (Solid Light Oak Block)MSE006 8810 only (E- size rail only)MSE018 9710 only $324.00MSE019 9800 with STS trimMSE020 9900 with STS trimDoor Closers (Solid Light Oak Block)MSD001 351 Series O Arm Only $364.00MSD002 1431 Series O Arm Only $364.00

MSD003 281 Series O Arm Only $337.00MSD004 1130 Series $364.00Electronic Access Control ProductsMSB003 10 Line Keypad KP & KU $205.00MSB004 10 Line Harmony $225.00MSB005 10 Line Passport $200.00MSB006 10G77 Low Profile (Bored-in) $271.00MSE002 59-80 Series Exit Device $310.00MSE003 8800 Series Passport $310.00MSE004 8900 Series Passport $360.00MSE007 8876 Low Profile (Rim Exit - LHR) $326.00MSE008 HT-80 Series Exit $815.00MSE009 8800 Series Harmony $337.00MSE010 8900 Series Harmony $230.00MSE011 8600 Series Harmony $230.00MSE012 8700 Series Harmony $230.00MSE013 KP 8900 Series Exit Device $310.00MSE014 56- (Electric Latch Retraction) 80 Series Exit Device $569.00MSE015 32" for 80 Series Rim $350.00MSE016 36" for 80 Series Rim $370.00MSE017 NB-8700 Series Harmony $230.00

MSE021 KP-8800 Series $265.00MSM006 8200 Series - Passport $200.00MSM007 KP 8200 Mortise Lock $271.00MSM008 8200 Series Low Profile (Mortise) $302.00MSM009 H1 8200 Series $302.00MSM016 H1/H2 R8200 Series $405.00Aperio HubsMSA001 AH20 Aluminum

$300.00MSA003 AH30 AluminumFinish Samples1111 Set of standard finishes on 11/4" diameter $56.00SFP1 Sample Finish Plate $180.00(US3, US4, US9, US10, US10B, US10BL, US14, US15, US20D, US26, US26D, US32, US32D, EB, ED, EN, EP, EAB)

Note: Sample mounts only. Hardware needs to be ordered separately.



18/443

GI-10

GENERAL INFORMATION

WEIGHT CHART




Freight Weight Chart

Shipping weights listed depict an approximation of the average weight for any lock, exit device, or closer and are meant only for

use in estimating weight.

Standard Packing

Product Line

Locksets Function Case Quantity Average Weight Per Case (lbs.)

7800 Line 7805 w/trim 6 42

7900 Line 7904 w/trim 6 428200 Line 8205 w/trim 6 42

T-Zone (11 Line) 11G05 10 45

10 Line 10G05 10 45

8 Line 8G05 10 27

7 Line 7G05 10 41

6 Line 6G05 10 21

6500 Line 65G05 10 41

GX (3 Line) 3U65 10 19

Exit Devices

90 Series 9863 w/trim 1 15

80 Series 8863 w/trim 1 15

20 Series 2828F 1 9

Closers

351 Series UO 4 34

281 Series O 2 24

1431 Series UO 4 32

1331 Series JUO 4 30

1130 Series RU 4 22

Overhead Holders & Stops

590/690 Series 1 6

1530/1540 Series 1 4

Screw Substitutions Price

Machine screw in place of wood screw No Extra Charge

Phillips head screws No Extra Charge

Spanner head in place of standard screws, specify WS or MS (37- option) See each product section for add

Six lobe security (Torx) screws (36- option) See each product section for add

82-3856 Spanner Bit Kit - (sizes 4, 6, 8, 10, 12 & 1/4"), (1/4" Driver) $98.97 Each

82-3855 Torx Bit Kit - (sizes T8, T9, T10, T15, T20, T25, & T27), (7/16" Driver) $152.26 Each



19/443

GI-11

GENERAL INFORMATION

MASTER OPTION LISTING




Master Option ListOption Series Used Description

1 7L, 10L, 7800, 7900, 8200, 470

3 8200, 9200

5P Cylinders for Conventional Key Systems

9 2408, 2900

10 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,460, 470, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation

10UL 7800, 7900, 8200, 9200, 4870, 7000, 20, 30, 80, 8888, 90, 9898, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

11 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,9898, 9800, 460, 470, 480, 4870, 758, 858, Keyswitch, KP10, 10LProfileSer.,10LRF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer.,

88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation12 20, 30, 83, MD84, MD86, WD86, SP-PP-PR86, LS-LP-LR-86, 87, NB87,

SP-PP-PR87, 88, 8888, 89, 90, 980, L980, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation, 5800, 7000, 2408, 2900

12HC 8700(all functions), 8800(04, 10, 13, 15), 980

13 GX, 6, 470

1331, 1431, 268, 269, 278, 281, 351, 421

14 6500, 6, 7, DL

GX

8700, 9700

15 6, GX, 470

16 20, 30, 80, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

48017 6

19 80, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

20 6500, 10, 460, 480, DL

21 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,460, 470, 480, 4870, 758, 858, 4142, 4143, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

22 6500, 6, 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,460, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

23 8, 10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation

6

7800, 8200, 9200, 8300, 8900, KP8200, 8200ProfileSer., 8200RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

24 6

114, 115


6

26 114, 115

1-1/16" wide front for 1-3/8" doors

Stainless Steel Hub

Cylinders for Conventional Key Systems

Companion units to 12-2400, 12-2900 Fire Guards

SARGENT Signature Key System

SARGENT Signature Key System meeting UL437(mortise and rim cylinders only)

SARGENT XC Key System

UL Fire Label

Fire Guard with Smoke Detector

UL Fire Label/Hurricane Code

Lockset x Front & Strike with 1/4" Radius (2-3/8"Backset only)

Door Closer Body Only

Full Lip Strike #505

Full Lip Strike #506

Sliding Bolt Bottom Case

Drive-In Guarded Latchbolt (2-3/8" Backset Only)

Cylinder Lockdown Feature

400 "T" Shaped Strike (2-3/4" x 1-1/8")

Lockset x 2-3/4" Backset x 2-1/4" x 1" Front

Pushbar without Lexan Touchpad

2-3/8" Backset

SARGENT Lost Ball Construction Key System

SARGENT Split Key Construction Key System(existing systems only)

3-3/4" Backset

3-3/4" Backset x 2-1/4" x 1-1/8" Front

Flat 4-7/8" ANSI Strike

2-3/4" Backset x 2-1/4" x 1-1/8" Front

2-3/4" Backset

5" Backset

5" Backset x 2-1/4" x 1-1/8" Front

7" Backset



20/443

GI-12

GENERAL INFORMATION






28 6500, 6, 7, 8, 10, T-Zone, DL, 114, 115, KP10, 10ProfileSer.,10RF-Actuation

GX

470, 480

4870


31 8, T-Zone, DL, 7800, 7900, 8200, 9200, 7000, 80, 90, 97, 98, 99,Holders & Stops

36 Cylindrical, Mortise, Closers, 80, 97, 98, 99, Exits, Holders & Stops, Aux. Locks,Deadlocks, 114, 115, 5100, 5800, 351EHT, 7000

37 Cylindrical, Mortise, Closers, 80, 97, 98, 99, Exits, Aux. Locks, Deadlocks, 114, 115,5100, 5800, 7000


42 9700, 9800, 990043 80

47 Cylinders

48 480

49 7800, 8200

50 7800, 8200

Cylinders

51 7800, 8200, 80, 97, 98, 99, 4870, 758, 858

52 7800, 8200, 80, 97, 98, 99, 4870, 758, 858

53 83, 84, MD84, 85, MD86, WD86, 87, NB87, PP/SP/PR8700, 88, 89 , 7000

54 83, 84, MD84, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89, 97, 98, 99, 7000

55 30, 80

7000

56 80

57 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89

58 80

59 83, 84, MD84, 85, MD86, WD86, 87, PP/SP/PR8700, 88, 89

BC59 83, 84, MD84, 85, MD86, WD86, 87, PP/SP/PR8700, 88, 89

60 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation



65 6300, 7300B

6573 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480, 4870,KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

65737P 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480, 4870,KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

ANSI A-115.2.1971 Curved Lip Strike (#808)

ANSI A-115.2.1971 Curved Lip Strike (#508)

ANSI A-115.2.1971 Flat Lip Strike (#408)

ANSI A-115.2.1971 Flat Lip Strike (#7710)

Lever to accept Schlage Cylinder-Cylinder is not provided

Special Thickness Doors (Specify door thickness)

6-Lobe Security Head Screws

Spanner Head Screws

3/4" Throw Latchbolt x 2-3/4" Backset

Flush End Cap

Special Cams

488 Strike 3-5/8" x 1-1/4"

Visual Status Indicator/Occupancy Indicatorw/Emerg. Rlease

Secured Indicator Rose

Hotel Function (Lockout)

Old Style Removable Core Cylinders for Existing

Systems only

Old Style Removable Construction Core Cylindersfor Existing Systems only

Latchbolt Monitor Switch

Internal Microswitch in ET Control

Signal Switch in Rail

Monitor Inside Lever

Remote Dogging/Latch Retraction

Delayed Action (Magnet ordered separate)

Electric Dogging

Electroguard

Electroguard Boca Code (needs door status switch)

SARGENT Removable Disposable ConstructionCore

SARGENT Removable Core Cylinder

SARGENT Removable Construction Core Cylinder

Uncombinate Cores

Small Format Interchangeable 6-Pin UncombinateCore

Small Format Interchangeable 7-Pin UncombinateCore



21/443

GI-13

GENERAL INFORMATION






68 7900, 8200, 9200

69 7900, 8200, 9200

70 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

72 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

73 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, 480, 4870,KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

737P 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, 480, 4870,

KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

74 7, 8, 10, 11, 7800, 8200, 4870, 114, 115

75 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation

6500

94, 7000

97, 98, 99

KP88

76 7, 8, 10, T-Zone, 7800, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation

6500

7900, 7000, 80, 97, 98, 99, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

77 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation

6500

7000

97, 98, 99

78 Mortise Cylinder

80 2900

7L, 10L, T-Zone, 8L

81 8, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

F182 7L, 8, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, 856/857 Padlocks,Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-

Actuation, KP89, 89ProfileSer., 89RF-Actuation82 7L, 8, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, 856/857 Padlocks,

Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

F183 8, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

83 8, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

Lock furnished w/lever handle outside x knob inside

Lock furnished w/lever handle inside x knob outside

Small Format Interchangeable Disposable PlasticConstruction Core

Small Format Interchangeable 6-Pin ConstructionCore

Small Format Interchangeable 6-Pin Core

Small Format Interchangeable 7-Pin Core

Lead Lining or Wrapping

Milled Inside Lever, Knurled Inside Knob

Handicap Warning on Inside of Lever EmbossedPlastic backing

Abrasive Strip on Rail

Knurled Crossbar

Tactile Warning

Milled Outside Lever, Knurled Outside Knob

Handicap Warning on Outside of Lever Embossed Plastic backing

Milled Outside Lever

Milled Both Levers, Knurled Both Levers

Handicap Warning on Both Levers EmbossedPlastic backing

Abrasive Strip on Rail, Abrasive Coating on Lever

Knurled Crossbar, Abrasive Coating on Lever

Exposed Barrel

Adjustable Hold Open Switch

Levers/Knobs to accept Keso and KesoF1 cylinders- no cylinders provided

Cylinder to accept Keso(83) and KesoF1(F183)removable core - no core provided

SARGENT KESO Security Cylinder - Patented -NEW Key Systems

SARGENT KESO Security Cylinder (ExistingSystems only)

SARGENT KESO Security Removable CoreCylinder - Patented - NEW Key Systems

SARGENT KESO Security Removable CoreCylinder (Existing Systems only)



22/443

GI-14

GENERAL INFORMATION






84 8, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, Padlocks, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

85 11L, 10L, 7L, 6500, 9L, 8L, 8200, 7800, 7900, 9200, 7000

86 11L, 10L, 7L, 6500, 9L, 8L, 8200, 7800, 7900, 9200, 7000, 80, 90

87 11L, 10L, 7L, 6500, 9L, 8L, 8200, 7800, 7900, 9200, 7000, 80, 90

91 5100, 5800, 10ProfileSer., 8200ProfileSer., 88ProfileSer., 89ProfileSer.

92 5100, 5800

93 5100, 5800

94 5100, 5800

ABC 281

AL 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89

AV 7800, 8200, 9200BC 80 Series Exit Devices

BP 7800, 8200

BR 6, 7, 8, 9, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,9898, 9800, 980 Mullions, 460, 470, 480, 4870, 5100, 5800, KP10, ProfileSer.,10LRF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer.,88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

BT 80 Series Exit Devices

C- 1130

CL 4000Ser.

CPC 7000, 281, 351, 421, 1431, 590, 690, 8300, 8400, 8500, 8600, 8700, 8800, 8900,9700, 9800, 9900

DA 278, 281, 351, 1431, 268, 269, 351EHT

DG1 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

DG2 9898, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation,

DG3 KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation

DM 10LProfile(G1.5), 8200 Profile(G1.5), 80Series Profile(G1.5)

DX 7800, 8200

EC 281, 1331 series

F1 KESO Cylinders/Keys

FM 8700 (E, F Rail only)

FW 7, 10

G1 10LProfileSer., 10LRF-Actuation, 8200ProfileSer., 8200RF-Actuation,88/89ProfileSer., 88/89RF-Actuation,

GL 8500, 8800, 8888

HC 8700 (all functions), 8800 (not available with 04, 10, 13, 15), 980

HC4 8700 Series

IDP Harmony Series 8200

IS 7800, 8200, 9200

LB 7900, 8200, 4870

LC Less Cylinder All products w/cylinders

LD 80 series exits

LX 8200

M- 9200

MC 351, 281, 1431, 421, 351EHT

NB 7000, 8400, 12-MD8400, MD8600, WD8600, 8700, 306, 313 Aux Controls

OBS 8200, 7800, 9200

OS 7800, 8200, 9200

SARGENT KESO Security RemovableConstruction Core Cylinder

Tactile Warning - Abrasive Coating on Inside Lever

Tactile Warning - Abrasive Coating on Outside Lever

Tactile Warning - Abrasive Coating on Outside &Inside Lever

Remote Power

Remote Monitoring

Continuous Alarm

Automatic Re-Arm

Advanced Backcheck

Alarmed (not available with 56 thru 59 options)

Anti-Vandal Pull TrimBoca Code

Distributor Bulk Pack Program - Lockbodies

SARGENT Bump Resistant Cylinder

Beacon Safe Egress

Cover

Low Ceiling

Clear Powder Coat over 26D/32D

Delayed Action

SARGENT DEGREE Key System



Forced/Propped Door Harness

Deadbolt Monitoring

Environmentally friendly ABS plastic cover

Patented Keso Key System

2Pt. Latching, Complies with FEMA 361

Freewheeling

v.G1 Next Generation software

Guarded Latch

Hurricane Code

Hurricane Resistant

Integrated Door Position Switch

Inside Working Trim Sets

ADA Extra Large Thumbturn

Less Cylinder

Less Dogging

Latchbolt Monitor

Closer with Metal Cover

No Bottom Rod

Open Back Strike

Outside Working Trim Sets



23/443

GI-15

GENERAL INFORMATION

PARTNER SERVICES

GENERAL INFORMATION





P- 114, 115, HP series

PL 80 Series

RX 10, 7900, 8200

SC 6, 6500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90, 470, 480,4870, 758, 858, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

SE 6, 6500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90, 470,480, 4870, 758, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,89RF-Actuation

SF 7L, 10L, 11L

SG 6, 7, 8, 9,10, T-Zone, 7800, 8200, 9200, 1431, 281, 421, 351, 80, 90, O/H Holders &Stops, 4870, 114/115, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

SL T-Zone

SRI 351, 281, 1431, 268, 278, 269, 421

T1 7900, 8200, R8200

T2 7900, 8200, R8200

T3 7900, 8200, R8200

TB 7000, 351, 281, 1431, 278, 421, 1331, 1130, 2727, 2828, 3727, 3828, 8300,8600, 8500, 8700, 8800, 8900, 9400, 9700, 9800, 9900, 114, 115, 5800,351EHT, 2408, 2900

TL 808200 x WT(escutcheon)

TR 7800, 8200

WBS 11L, 10L, 7L, 3L, DL, 9L, 8L, 6L, 8200, 7800, 7900, 9200

WS 8500, 8800, & 8900 Series

Engraved Paddles Push and Pull

SARGuide Photoluminescent Coating

Request to exit or enter switch

Schlage "C" Keyway Cylinder - "0" Bitted

Schlage "E" Keyway Cylinder - "0" Bitted

Lever to accept Medeco Keymark & Schlage Large

Format Interchangeable Core No core providedMicroShield - an antimicrobial powdercoat finish

High Security Lever Attachment

Additional Special Rust Inhibitor (SRI)

Decorative thumburn; backplate matches rosedesign chosen

Decorative square thumburn; backplate matchesrose design chosen

Decorative cylinder thumburn; backplate matchesrose design chosen

Thru Bolt

SARGuide - Illuminated TouchpadSARGuide - Illuminated WT Escutcheon

Distributor Bulk Pack Program - Complete Trim Packs

Wrought Box Strike

Windstorm Certified



24/443

GI-16

GENERAL INFORMATION

PARTNER SERVICES

GENERAL INFORMATION




Business Hours:The Partner Services Team (except Customer Service)is available: 8:00 AM to 4:30 PM Eastern Standard Time.

Customer Service Hours: 8:00 AM to 6:00 PM ( Monday Thursday)8:00 AM to 4:30 PM (Friday)

Toll Free Telephone Number:1-800-727-5477

Order Fax Number: 1- 800-906-6606. Order email:[email protected]

Contact Phone Numbers:Included is a list of Whos Who for the Partner Services Team. Thislist includes Team Members direct extensions and email addresses.

2014 Calendar:SARGENT observes the following Holidays:

November 27 and 28 (Thanksgiving)

December 24, 25 and 26 (Christmas)

2015 Calendar:

January 1 and 2 (New Years)

January 19 (Martin Luther King Day)

February 16 (Presidents Day)

April 3 (Good Friday)

May25(MemorialDay)

SARGENT Website:We offer a full service website www.sargentlock.com. The Partner Servicespage of the SARGENT website includes templates, instruction sheets, configurable cut sheets,wiring diagrams and our latest product developments. All product information catalogs are alsoavailable on this website.

RGA Policy:Please refer to GI-4 of the General Information Section.


December 24 and 25 (Christmas)

July 3 (4th of July)

September 7 (Labor Day)

November 26 and 27 (Thanksgiving)


25/443

GI-17

GENERAL INFORMATION

WHOS WHO AT SARGENT




CUSTOMER SUPPORT SERVICES

(Order Processing, Customer Service, Keying)

Telephone: 800-727-5477

Manager Customer Relations & Support Services

Lynn Higgins 1-5948 [email protected]

Supervisor, Order Entry & EBusiness

Jackie Bacha 1-5852 [email protected]

Supervisor, Customer Services

Susanna Bria 1-5584 [email protected]

Order Processing Edit/Enter Orders

Fax Orders To: 800-906-6606

Email Orders to: [email protected]

Customer Service Expedites, Returns,

Change Orders, Line Suspensions

Fax: 888-836-5054

Telephone: 800-727-5477



26/443

GI-18

GENERAL INFORMATION

WHOS WHO AT SARGENT




Customer Service Team Members

Expedites, Returns, Change Orders, Line Suspensions

Customer Services Fax: 888-863-5054 Telephone: 800-727-5477

Supervisor of Customer ServiceSusanna Bria 1-5584 [email protected]

Customer Support Specialists(Returns, Expedites, Product Questions,Changes,Suspensions)

Western Region 4 (South)Luci Muzyk: (A15, A16, A37, A38, A39) 1-6852 [email protected]

Northern Regions 1Lennie Makosky: (A01**, A02, A03) & OEM Customers 1-5581 [email protected]

NE, SE & Western Region 1, 2 (North) & Southeast Region 4Shirley Sotaski: (A01**) (A43) & (A44), (SC) 1-5715 [email protected]

Western Region 4 (South)Cheta Cusson: (A45), Arrow 1-5906 [email protected]

Central Region 2 & Southeast Region 3Sean Upton: (A27, A28) & Canada 1-5713 [email protected]

NE & Midwest Atlantic Region 1

Cheta Cusson: (A01**, A07 & A08) 1-5861 [email protected]

Northern Region 1, Central Region 3, Southeast Region 2Maria Hanley: (A31, A32) & NC only 1-5759 [email protected]

Midwest Region 2 & Central Region 3Joann Sierejko: (A21, A22) 1-5755 [email protected]

International CompaniesLuci Muzyk 1-6852 [email protected]

Customer Exceptions:Joann Sierejko: All Akron, MidWest Wholesale

Shirley Sotaski: All General Supply, Cleveland Vicon, Tru-Fit, Piper Weatherford & Doors Inc. DesMoines/Cedar Rapids

Cheta Cusson: Himmels Hardware & Island Pacific, Doors Inc. Ft Dodge

Maria Hanley: Dugmore & Duncan, Doors Inc. Swaledale/Iowa City

Sean Upton, DH Pace

Luci Muzyk: Doors Inc. Waterloo/Davenport

**New England Region (A01) is split among 3 CSRs Cheta Cusson, Lennie Makosky, & Shirley Sotaski

Telephone: 800-727-5477 Fax Orders To: 800-906-6606



27/443

GI-19

GENERAL INFORMATION

WHOS WHO AT SARGENT




Telephone: 800-727-5477 Fax Orders To: 800-906-6606KEY SYSTEMS TEAM

Master Key Systems Support Fax: 888-898-8995

KEY DESIGN TEAM

SR. Key Systems Design & Development ManagerEvaldas Malinauskas 1-5955 [email protected]

Birute Gelazauskiene (Signature) 1-5786 [email protected]

Lijana Mursko (Conventional, Keso, Non, 24-Hour) 1-5558 [email protected]

Romas Sakalauskas (KESO) 1-5625 [email protected]

Saulius Jovaisa (Conventional, SFIC) 1-5722 [email protected] Dautaj (Canada Orders, Bitting Lists) 1-5746 [email protected]

Maureen Froehlich Key Edit 1-5767 [email protected]

MARKETINGDirector of Marketing CommunicationsKristen Bylan 1-6879 [email protected]

Marketing Communications Electronic Access ControlLaura Fradette 1-5666 [email protected]

Marketing Communications Specialist Decorative HardwareEmily Paecht 1-5682 [email protected]

Marketing Communications Specialist Mechanical ProductsAmy Esposito 1-5608 Amy.Esposito@assaabloy.