sar test report - cubot · report no.: agc00377160301eh01 page 4 of 236 table of contents 1....
TRANSCRIPT
Page 1 of 236
SAR Test Report
Report No.: AGC00377160301EH01
PRODUCT DESIGNATION : GSM /WCDMA/FDD-LTE Mobile Phone
BRAND NAME : CUBOT
MODEL NAME : CHEETAH
CLIENT : Shenzhen Huafurui Technology Co., Ltd.
DATE OF ISSUE : Apr. 12,2016
STANDARD(S) : EN 50360:2001+A1:2012;EN62209-1:2006;IEC62209-1:2005; IEC 62209-2:2010;EN62209-2:2010;EN50566:2013
REPORT VERSION : V1.0
Attestation of Global Compliance(Shenzhen) Co., Ltd.
CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.
Report No.: AGC00377160301EH01 Page 2 of 236
Report Revise Record
Report Version Revise Time Issued Date Valid Version Notes
V1.0 / Apr. 12,2016 Valid Original Report
Report No.: AGC00377160301EH01 Page 3 of 236
Test Report Certification Applicant Name Shenzhen Huafurui Technology Co., Ltd.
Applicant Address Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China
Manufacturer Name Shenzhen Huafurui Technology Co., Ltd.
Manufacturer Address Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China
Product Designation GSM /WCDMA/FDD-LTE Mobile Phone
Brand Name CUBOT
Model Name CHEETAH
Different Description N/A
EUT Voltage DC3.8V by battery
Applicable Standard EN 50360:2001+A1:2012;EN62209-1:2006;IEC62209-1:2005;
IEC 62209-2:2010;EN62209-2:2010;EN50566:2013
Test Date Mar. 20,2016 to Apr. 07,2016
Performed Location Attestation of Global Compliance(Shenzhen) Co., Ltd.
2 F, Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang Street, Bao'an District, Shenzhen, China
Report Template AGCRT-EC-4G/SAR (2016-01-01)
Tested By
Thea Huang(Huang Qianqian)
Apr. 12,2016
Checked By
Angela Li(Li Jiao)
Apr. 12,2016
Authorized By
Solger Zhang(Zhang Hongyi)
Authorized Officer Apr. 12,2016
Report No.: AGC00377160301EH01 Page 4 of 236
TABLE OF CONTENTS
1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5
2. GENERAL INFORMATION ............................................................................................................................ 6
2.1. EUT DESCRIPTION ...................................................................................................................................... 6
3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8
3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-FIELD PROBE ....................................................................................................................... 9 3.3. ROBOT ....................................................................................................................................................... 9 3.4. VIDEO POSITIONING SYSTEM ..................................................................................................................... 10 3.5. DEVICE HOLDER ....................................................................................................................................... 10 3.6. SAM TWIN PHANTOM ................................................................................................................................. 11
4. SAR MEASUREMENT PROCEDURE ........................................................................................................... 12
4.1. SPECIFIC ABSORPTION RATE (SAR) ........................................................................................................... 12 4.2. SAR MEASUREMENT PROCEDURE ............................................................................................................. 13
5. TISSUE SIMULATING LIQUID ...................................................................................................................... 14
5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 14 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS .............................................................. 14 5.3. TISSUE CALIBRATION RESULT ..................................................................................................................... 15
6. SAR SYSTEM CHECK PROCEDURE ......................................................................................................... 16
6.1. SAR SYSTEM CHECK PROCEDURES ........................................................................................................... 16 6.2. SAR SYSTEM CHECK ................................................................................................................................ 17
7. EUT TEST POSITION .................................................................................................................................. 19
7.1. DEFINE TWO IMAGINARY LINES ON THE HANDSET ......................................................................................... 19 7.2. CHEEK POSITION ...................................................................................................................................... 20 7.3. TILT POSITION ........................................................................................................................................... 20 7.4. BODY WORN POSITION .............................................................................................................................. 21
8. SAR EXPOSURE LIMITS ............................................................................................................................ 22
9. TEST EQUIPMENT LIST ............................................................................................................................. 23
10. MEASUREMENT UNCERTAINTY .............................................................................................................. 24
11. CONDUCTED POWER MEASUREMENT .................................................................................................. 26
12. TEST RESULTS ........................................................................................................................................ 44
12.1. SAR TEST RESULTS SUMMARY ................................................................................................................ 44
APPENDIX A. SAR SYSTEM CHECK DATA ................................................................................................... 54
APPENDIX B. SAR MEASUREMENT DATA.................................................................................................... 68
APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS ...................................................... 236
APPENDIX D. CALIBRATION DATA ............................................................................................................. 236
Report No.: AGC00377160301EH01 Page 5 of 236
1. SUMMARY OF MAXIMUM SAR VALUE The maximum results of Specific Absorption Rate (SAR) found during testing for EUT are as follows:
Frequency Band
Highest Reported 10g-SAR(W/Kg)
SAR Test Limit (W/Kg) Head
Body-worn (with 15mm separation)
GSM 900 0.280 0.400
2.0
DCS 1800 0.180 0.479
WCDMA Band I 0.152 0.208
WCDMA Band VIII 0.233 0.179
LTE Band 1 0.169 0.191
LTE Band 3 0.368 0.409
LTE Band 7 0.063 0.147
LTE Band 20 0.101 0.116
SAR Test Result PASS
This device is compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (2.0W/Kg).
Report No.: AGC00377160301EH01 Page 6 of 236
2. GENERAL INFORMATION
2.1. EUT Description
General Information
Product Designation GSM /WCDMA/FDD-LTE Mobile Phone
Test Model CHEETAH
Hardware Version N625AB-01
Software Version CUBOT_cheetah_01_5281C_V01_20160307
Device Category Portable
RF Exposure Environment Uncontrolled
Antenna Type Internal
GSM and GPRS&EGPRS
Support Band GSM 850 GSM 900 DCS 1800 PCS 1900
GPRS & EGPRS Type Class B
GPRS & EGPRS Class Class 12(1Tx+4Rx, 2Tx+3Rx, 3Tx+2Rx, 4Tx+1Rx)
TX Frequency Range GSM900:880-915MHz ; DCS1800:1710-1785MHz
RX Frequency Range GSM900:925-960MHz ; DCS1800:1805-1880MHz
Release Version R99
Type of modulation GMSK for GSM/GPRS; GMSK & 8-PSK for EGPRS
Antenna Gain GSM 900: -4.69dBi; DCS 1800 :-1.22dBi
Max. Average Power (Max. Peak Power)
GSM900:31.34dBm (31.66dBm) DCS1800:28.31dBm (28.42dBm)
Bluetooth
Bluetooth Version V2.0 V2.1 V2.1+EDR V3.0 V3.0+HS V4.0
Operation Frequency 2402~2480MHz
Type of modulation GFSK ∏/4-DQPSK 8-DPSK
EIRP -0.81dBm
Antenna Gain -3.81dBi
WIFI
WIFI Specification 802.11a 802.11b 802.11g 802.11n(20) 802.11n(40)
Operation Frequency 2412~2472MHz
EIRP 11b:6.74dBm,11g:3.76dBm,11n(20):4.38dBm,11n(40):3.66dBm
Antenna Gain -3.81dBi
Report No.: AGC00377160301EH01 Page 7 of 236
EUT Description( Continue)
WCDMA
Support Band UMTS FDD Band I UMTS FDD Band VIII UMTS FDD Band II UMTS FDD Band V
HS Type HSPA(HSUPA/HSDPA)
TX Frequency Range WCDMA Band I : 1920-1980MHz; WCDMA Band VIII : 880-915MHz
RX Frequency Range WCDMA Band I : 2110-2170MHz; WCDMA Band VIII : 925-960MHz
Release Version Rel-6
Type of modulation HSDPA:QPSK/16QAM; HSUPA:BPSK; WCDMA:QPSK
Antenna Gain Band I: -1.62dBi ; Band VIII: -4.69dBi
Max. Average Power (Max. Peak Power)
Band I:23.34dBm (23.50dBm) ;Band VIII:23.32dBm (23.47dBm)
LTE
Support Band Band 1 Band 3 Band 7 Band 8 Band 20
TX Frequency Range Band 1:1920-1980 MHz; Band 3: 1710-1785 MHz; Band 7:2500-2570MHz Band 20:832-862 MHz
RX Frequency Range Band 1:2110-2170 MHz; Band 3: 1805-1880 MHz; Band 7:2620-2690MHz Band 20: 791-821 MHz
Release Version Rel-8
Type of modulation QPSK,16QAM
Antenna Gain -1.62dBi(Band 1), -1.22dBi(Band 3),-1.09dBi (Band 7),-0.88dBi(Band 20)
Diversity Antenna Gain -1.86dBi(Band 1), -1.43dBi(Band 3),-1.50dBi (Band 7),-1.16dBi(Band 20)
Max. Average Power Band 1: 22.46dBm, Band 3: 22.46dBm , Band 7:22.47dBm; Band 20:22.50dBm;
Li-ion Battery
Brand Name CUBOT
Model Name CHEETAH
Manufacturer Name ZHONGSHAN TIANMAO BATTERY CO., LTD.
Manufacturer Address NO.208, Qianjin One Road, The Third Industrial Zone, Tanzhou Town Zhongshan City, China
Capacitance 3030mAh
Rated Voltage/ Charging Voltage
DC3.8V/ DC4.35V
Note: 1.The sample used for testing is end product.
2. Diverstity antenna just for receive.
3. EUT does not support VoLTE.
Report No.: AGC00377160301EH01 Page 8 of 236
3. SAR MEASUREMENT SYSTEM
3.1. The SATIMO system used for performing compliance tests consists of following items
The COMOSAR system for performing compliance tests consists of the following items:
· The PC. It controls most of the bench devices and stores measurement data.A computer running WinXP and
the Opensar software.
· The E-Field probe. The probe is a 3-axis system made of 3 distinct dipoles. Each dipole returns a voltage in
function of the ambient electric field.
· The Keithley multimeter measures each probe dipole voltages.
· The SAM phantom simulates a human head. The measurement of the electric field is made inside the
phantom.
· The liquids simulate the dielectric properties of the human head tissues.
· The network emulator controls the mobile phone under test.
· The validation dipoles are used to measure a reference SAR. They are used to periodically check the bench to
make sure that there is no drift of the system characteristics over time.
·The phantom, the device holder and other accessories according to the targeted measurement.
Report No.: AGC00377160301EH01 Page 9 of 236
3.2. COMOSAR E-Field Probe
The SAR measurement is conducted with the dosimetric probe manufactured by SATIMO. The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. SATIMO conducts the probe calibration in compliance with international and national standards (e.g. IEEE 1528, EN62209, IEC 62209, etc.)Under ISO17025.The calibration data are in Appendix D.
Isotropic E-Field Probe Specification
Model SSE5
Manufacture MVG
Identification No. SN 22/12 EP159
Frequency 0.45GHz-3.7GHz Linearity:±0.05dB(450MHz-3.7GHz)
Dynamic Range 0.01W/Kg-100W/Kg Linearity:±0.05dB
Dimensions
Overall length:330mm Length of individual dipoles:4.5mm Maximum external diameter:8mm Probe Tip external diameter:5mm Distance between dipoles/ probe extremity:2.7mm
Application
High precision dosimetric measurements in any exposure scenario (e.g., very strong gradient fields). Only probe which enables compliance testing for frequencies up to 3 GHz with precision of better 30%.
3.3. Robot The COMOSAR system uses the KUKA robot from SATIMO SA (France).For the 6-axis controller COMOSAR system, the KUKA robot controller version from SATIMO is used. The XL robot series have many features that are important for our application: � High precision (repeatability 0.02 mm) � High reliability (industrial design) � Jerk-free straight movements � Low ELF interference (the closed metallic construction shields against motor control fields) � 6-axis controller
Report No.: AGC00377160301EH01 Page 10 of 236
3.4. Video Positioning System The video positioning system is used in OpenSAR to check the probe. Which is composed of a camera, LED, mirror and mechanical parts.The camera is piloted by the main computer with firewire link. During the process, the actual position of the probe tip with respect to the robot arm is measured, as well as the probe length and the horizontal probe offset. The software then corrects all movements, such that the robot coordinates are valid for the probe tip. The repeatability of this process is better than 0.1 mm. If a position has been taught with an aligned probe, the same position will be reached with another aligned probe within 0.1 mm, even if the other probe has different dimensions. During probe rotations, the probe tip will keep its actual position.
3.5. Device Holder The COMOSAR device holder is designed to cope with different positions given in the standard. It has two scales for the device rotation (with respect to the body axis) and the device inclination (with respect to the line between the ear reference points). The rotation center for both scales is the ear reference point (EPR). Thus the device needs no repositioning when changing the angles. The COMOSAR device holder has been made out of low-loss POM material having the following dielectric parameters: relative permittivity εr =3 and loss tangent δ = 0.02. The amount of dielectric material has been reduced in the closest vicinity of the device, since measurements have suggested that the influence of the clamp on the test results could thus be lowered.
Report No.: AGC00377160301EH01 Page 11 of 236
3.6. SAM Twin Phantom The SAM twin phantom is a fiberglass shell phantom with 2mm shell thickness (except the ear region where shell thickness increases to 6mm). It has three measurement areas: � Left head � Right head � Flat phantom
The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot.
Report No.: AGC00377160301EH01 Page 12 of 236
4. SAR MEASUREMENT PROCEDURE
4.1. Specific Absorption Rate (SAR)
SAR is related to the rate at which energy is absorbed per unit mass in object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and occupational/uncontrolled, based on a person’s awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled.
The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element(dv) of given mass density (ρ). The equation description is as below:
SAR is expressed in units of Watts per kilogram (W/Kg) SAR can be obtained using either of the following equations:
Where SAR is the specific absorption rate in watts per kilogram;
E is the r.m.s. value of the electric field strength in the tissue in volts per meter; ζ is the conductivity of the tissue in siemens per metre;
ρ is the density of the tissue in kilograms per cubic metre; ch is the heat capacity of the tissue in joules per kilogram and Kelvin;
dT
dt│t = 0 is the initial time derivative of temperature in the tissue in kelvins per second
Report No.: AGC00377160301EH01 Page 13 of 236
4.2. SAR Measurement Procedure
Step 1: Power Reference Measurement
The Power Reference Measurement and Power Drift Measurement are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface is 2.7mm This distance cannot be smaller than the distance os sensor calibration points to probe tip as `defined in the probe properties,
Step 2: Area Scan
The Area Scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in SATIMO software can find the maximum locations even in relatively coarse grids. When an Area Scan has measured all reachable points, it computes the field maximal found in the scanned area, within a range of the global maximum. The range (in db) is specified in the standards for compliance testing. For example, a 2db range is required in IEEE Standard 1528 and IEC62209 standards, whereby 3db is a requirement when compliance is assessed in accordance with the ARIB standard (Japan) If one Zoom Scan follows the Area Scan, then only the absolute maximum will be taken as reference. For cases where multiple maximum are detected, the number of Zoom Scan has to be increased accordingly.
measure the SAR distribution within the phantom (area scan procedure). The SAR distribution is scanned along the inside surface of one side of the phantom head, at least for an area larger than the projection of the handset and antenna. The spatial grid step shall be less than 20 mm. The resolution accuracy can also be tested using the reference functions of 7.2.4. If surface scanning is used, then the distance between the geometrical centre of the probe dipoles and the inner surface of the phantom shall be 8,0 mm or less (±1,0 mm). At all measurement points, the angle of the probe with respect to the line normal to the surface is recommended but not required to be less than 30°.
Step 3: Zoom Scan
Zoom Scan are used to assess the peak spatial SAR value within a cubic average volume containing 1g abd 10g of simulated tissue. The Zoom Scan measures points(refer to table below) within a cube whose base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the Zoom Scan evaluates the averaged SAR for 1g and 10g and displays these values next to the job’s label.
measure SAR with a grid step of 8 mm or less in a volume with a minimum size of 30 mm by 30 mm and 30 mm in depth (zoom scan procedure). The grid step in the vertical direction shall be 5 mm or less (see C.3.3). Separate grids shall be centred on each of the local SAR maxima found in step c). Step 4: Power Drift Measurement
The Power Drift Measurement measures the field at the same location as the most recent power reference measurement within the same procedure, and with the same settings. The Power Drift Measurement gives the field difference in dB from the reading conducted within the same settings. This allows a user to monitor the power drift of the device under test within a batch process. The measurement procedure is the same as Step 1.
Report No.: AGC00377160301EH01 Page 14 of 236
5. TISSUE SIMULATING LIQUID
For SAR measurement of the field distribution inside the phantom, the phantom must be filled with homogeneous tissue simulating liquid to a depth of at least 15cm. For head SAR testing the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15cm For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15cm.The nominal dielectric values of the tissue simulating liquids in the phantom and the tolerance of 5% are listed in 5.2
5.1. The composition of the tissue simulating liquid Ingredient (% Weight)
Frequency (MHz)
Water Nacl Sugar HEC Bactericide DGBE 1,2-
Propanediol Triton X-100
835 40.45 1.45 57 1 0.1 0.0 0.0 0.0
900 34.4 0.79 0.0 0.0 0.0 0.0 64.81 0.0
1800 55.36 0.35 0.0 0.0 0.0 13.84 0.0 30.45
2000 50 0.0 0.0 0.0 0.0 50 0.0 0.0
2600 55.242 0.306 0.0 0.0 0.0 44.452 0.0 0.0
5.2. Tissue Dielectric Parameters for Head and Body Phantoms
The head tissue dielectric parameters recommended by the EN62209-1 have been incorporated in the following table.The body tissue dielectric parameters recommended by the EN62209-2 have been incorporated in the following table.
Target Frequency (MHz)
head body
εr σ (S/m) εr σ (S/m)
300 45.3 0.87 45.3 0.87
450 43.5 0.87 43.5 0.87
835 41.5 0.90 41.5 0.90
900 41.5 0.97 41.5 0.97
1450 40.5 1.20 40.5 1.20
1800 – 2000 40.0 1.40 40.0 1.40
2450 39.2 1.80 39.2 1.80
2600 39.00 1.96 39.00 1.96
3000 38.5 2.40 38.5 2.40
(εr = relative permittivity, ζ = conductivity and ρ = 1000 kg/m3)
Report No.: AGC00377160301EH01 Page 15 of 236
5.3. Tissue Calibration Result
The dielectric parameters of the liquids were verified prior to the SAR evaluation using SATIMO Dielectric Probe Kit and R&S Network Analyzer ZVL6.
Frequency (MHz)
Target Value Measurement Value Tissue Temp [oC]
Test Date εr δ[s/m] εr δ[s/m]
900 41.50
39.425-43.575 0.97
0.9225-1.0185 41.69 0.97 22.9 Apr. 06,2016
1800 40.00
38.00-42.00 1.40
1.33-1.47 40.38 1.42 22.1 Apr. 05,2016
2000 40.00
38.00-42.00 1.40
1.33-1.47 40.58 1.41 22.4 Apr. 07,2016
835 41.5
39.425-43.575 0.90
0.855-0.945 41.68 0.91 21.0 Mar. 28,2016
1800 40.00
38.00-42.00 1.40
1.33-1.47 40.25 1.43 20.9 Mar. 22,2016
2000 40.00
38.00-42.00 1.40
1.33-1.47 39.95 1.41 21.0 Mar. 21,2016
2600 39.0
37.05-40.95 1.96
1.86-2.06 39.12 1.92 21.0 Mar. 20,2016
Report No.: AGC00377160301EH01 Page 16 of 236
6. SAR SYSTEM CHECK PROCEDURE
6.1. SAR System Check Procedures SAR system check is required to confirm measurement accuracy, according to the tissue dielectric media, probe calibration points and other system operating parameters required for measuring the SAR of a test device. The system verification must be performed for each frequency band and within the valid range of each probe calibration point required for testing the device. The same SAR probe(s) and tissue-equivalent media combinations used with each specific SAR system for system verification must be used for device testing. When multiple probe calibration points are required to cover substantially large transmission bands, independent system verifications are required for each probe calibration point. A system verification must be performed before each series of SAR measurements using the same probe calibration point and tissue-equivalent medium. Additional system verification should be considered according to the conditions of the tissue-equivalent medium and measured tissue dielectric parameters, typically every three to four days when the liquid parameters are remeasured or sooner when marginal liquid parameters are used at the beginning of a series of measurements.
Each SATIMO system is equipped with one or more system check kits. These units, together with the predefined measurement procedures within the SATIMO software, enable the user to conduct the system check and system validation. System kit includes a dipole, and dipole device holder.
The system check verifies that the system operates within its specifications. It’s performed daily or before every SAR measurement. The system check uses normal SAR measurement in the flat section of the phantom with a matched dipole at a specified distance. The system check setup is shown as below.
Report No.: AGC00377160301EH01 Page 17 of 236
6.2. SAR System Check 6.2.1. Dipoles
The dipoles used is based on the EN62209-1/2 standard, the table below provides details for the mechanical and electrical Specifications for the dipoles.
Frequency L (mm) h (mm) d (mm)
835MHz 161.0 89.8 3.6
900 MHz 149.0 83.3 3.6
1800MHz 71.6 41.7 3.6
2000 MHz 64.5 37.5 3.6
2600MHz 48.5 28.8 3.6
Report No.: AGC00377160301EH01 Page 18 of 236
6.2.2. System Check Result
System Performance Check at 835MHz & 900 MHz &1800MHz & 2000MHz & 2600MHz
Validation Kit: SN 30/14 DIP 0G835-332 &SN 46/11DIP 0G900-185 & SN 46/11DIP 1G800-186 & SN 46/11DIP 2G000-188 & SN 47/14 DIP 2G600-342
Frequency [MHz]
Target Value(W/Kg)
Reference Result (± 10%)
Normalized to 1W(W/Kg)
Tissue Temp.
[°C] Test time
1g 10g 1g 10g 1g 10g
900 10.70 6.72 9.63-11.77 6.048-7.392 11.012 6.908 22.9 Apr. 06,2016
1800 38.17 19.98 34.353-41.987 17.982-21.987 35.030 18.894 22.1 Apr. 05,2016
2000 42.10 20.52 37.89-46.31 18.468-22.572 44.208 21.844 22.4 Apr. 07,2016
835 9.63 6.15 8.667-10.593 5.535-6.765 9.821 6.107 21.0 Mar. 28,2016
1800 38.17 19.98 34.353-41.987 17.982-21.987 38.079 20.571 20.9 Mar. 22,2016
2000 42.10 20.52 37.89-46.31 18.468-22.572 41.369 22.149 21.0 Mar. 21,2016
2600 55.48 24.49 49.932-61.028 22.041-26.939 52.807 23.522 21.0 Mar. 20,2016
Note: (1) We use a CW signal of 18dBm for system check, and then all SAR value are normalized to 1W forward power. The result must be within ±10% of target value.
Report No.: AGC00377160301EH01 Page 19 of 236
7. EUT TEST POSITION
This EUT was tested in Right Cheek, Right Tilted, Left Cheek, Left Tilted, Body back and Body front.
7.1. Define Two Imaginary Lines on the Handset
(1)The vertical centerline passes through two points on the front side of the handset the midpoint of the width wt of the handset at the level of the acoustic output, and the midpoint of the width wb of the handset.
(2)The horizontal line is perpendicular to the vertical centerline and passes through the center of the acoustic output. The horizontal line is also tangential to the face of the handset at point A.
(3)The two lines intersect at point A. Note that for many handsets, point A coincides with the center of the acoustic output; however, the acoustic output may be located elsewhere on the horizontal line. Also note that the vertical centerline is not necessarily to the front face of the handset, especially for clamshell handsets, handsets with flip covers, and other irregularly shaped handsets.
Report No.: AGC00377160301EH01 Page 20 of 236
7.2. Cheek Position
(1) To position the device with the vertical center line of the body of the device and the horizontal line crossing the center picec in a plane parallel to the sagittal plane of the phantom. While maintaining the device in this plane, align the vertical center line with the reference plane containing the ear and mouth reference point (M: Mouth, RE: Right Ear, and LE: Left Ear) and align the center of the ear piece with the line RE-LE.
(2) To move the device towards the phantom with the ear piece aligned with the the line LE-RE until the phone touched the ear. While maintaining the device in the reference plane and maintaining the phone contact with ear, move the bottom of the phone until any point on the front side is in contact with the cheek of the phantom or until contact with the ear is lost
7.3. Tilt Position
(1) To position the device in the “cheek” position described above.
(2) While maintaining the device in the reference plane described above and pivoting against the ear, moves it outward away from the mouth by an angle of 15 degrees or until with the ear is lost.
Report No.: AGC00377160301EH01 Page 21 of 236
7.4. Body Worn Position
(1) To position the EUT parallel to the phantom surface.
(2) To adjust the EUT parallel to the flat phantom.
(3) To adjust the distance between the EUT surface and the flat phantom to 15mm.
Report No.: AGC00377160301EH01 Page 22 of 236
8. SAR EXPOSURE LIMITS
SAR assessments have been made in line with the requirements of 1999/519/EC of 12 July 1999 on the limitation of exposure of the general public electromagnetic fields (0 Hz-300GHz).
Limits for General Population/Uncontrolled Exposure (W/kg)
Type Exposure Uncontrolled Environment Limit (W/kg)
Spatial Peak SAR (10 g cube tissue for brain or body) 2.00
Spatial Average SAR (Whole body) 0.08
Spatial Peak SAR (Limbs) 4.00
Report No.: AGC00377160301EH01 Page 23 of 236
9. TEST EQUIPMENT LIST Equipment description
Manufacturer/ Model
Identification No. Current calibration
date Next calibration
date
SAR Probe MVG SN 22/12 EP159 12/09/2015 12/08/2016
TISSUE Probe SATIMO SN 45/11 OCPG45 12/02/2015 12/01/2016
Phantom SATIMO SN_4511_SAM90 Validated. No cal
required. Validated. No cal
required.
Liquid SATIMO - Validated. No cal
required. Validated. No cal
required.
Comm Tester R&S- CMW500 S/N120909 10/19/2015 10/18/2016
Comm Tester Agilent-8960 GB46310822 03/11/2016 03/10/2017
Multimeter Keithley 2000 1188656 03/10/2016 03/09/2017
Dipole SATIMO SID835 SN30/14 DIP 0G835-332
09/01/2014 08/31/2017
Dipole SATIMO SID900 SN46/11 DIP 0G900-185
11/14/2013 11/13/2016
Dipole SATIMO SID1800 SN46/11 DIP 1G800-186
11/14/2013 11/13/2016
Dipole SATIMO SID2000 SN46/11 DIP 2G000-188
11/14/2013 11/13/2016
Dipole SATIMO SID2600 SN47/14 DIP 2G600-342
12/03/2014 12/02/2017
Signal Generator Agilent-E4438C US41461365 02/29/2016 02/28/2017
Spectrum Analyzer E4440
Agilent US41421290 07/23/2015 07/22/2016
Network Analyzer Rhode & Schwarz
ZVL6 SN100132 03/01/2016 02/28/2017
Attenuator Warison
/WATT-6SR1211 N/A N/A N/A
Attenuator Mini-circuits /
VAT-10+ N/A N/A N/A
Amplifier EM30180 SN060552 03/04/2016 03/03/2017
Directional Couple
Werlatone/ C5571-10
SN99463 07/29/2015 07/28/2016
Directional Couple
Werlatone/ C6026-10
SN99482 07/29/2015 07/28/2016
Power Sensor NRP-Z21 1137.6000.02 10/20/2015 10/19/2016
Power Sensor NRP-Z23 US38261498 03/01/2016 02/28/2017
Power Viewer R&S V2.3.1.0 N/A N/A
Note: Per EN62209-1/2 Dipole SAR Validation, AGC Lab has adopted 3 years calibration intervals. On annual basis, every measurement dipole has been evaluated and is in compliance with the following criteria: 1. There is no physical damage on the dipole; 2. System validation with specific dipole is within 10% of calibrated value; 3. Return-loss is within 20% of calibrated measurement; 4. Impedance is within 5Ω of calibrated measurement.
Report No.: AGC00377160301EH01 Page 24 of 236
10. MEASUREMENT UNCERTAINTY
SATIMO Uncertainty Measurement uncertainty for 450 MHz to 3.7 GHz averaged over 1 gram / 10 gram.
Uncertainty Component Sec. Tol (+- %)
Prob. Dist.
Div. Ci (1g) Ci (10g)
1g Ui (+-%)
10g Ui (+-%)
Vi
Measurement System
Probe calibration E.2.1 5.831 N 1 1 1 5.83 5.83 ∞
Axial Isotropy E.2.2 2.5 R 3 1 1 1.44 1.44 ∞
Hemispherical Isotropy E.2.2 4.0 R 3 1 1 2.31 2.31 ∞
Boundary effect E.2.3 1.0 R 3 1 1 0.58 0.58 ∞
Linearity E.2.4 1.13 R 3 1 1 0.65 0.65 ∞
System detection limits E.2.5 1.0 R 3 1 1 0.58 0.58 ∞
Readout Electronics E.2.6 0.02 N 1 1 1 0.02 0.02 ∞
Response Time E.2.7 3.0 R 3 1 1 1.73 1.73 ∞
Integration Time E.2.8 2.0 R 3 1 1 1.15 1.15 ∞
RF ambient Conditions E.6.1 3.0 R 3 1 1 1.73 1.73 ∞
Probe positioner Mechanical Tolerance
E.6.2 2.0 R 3 1 1 1.15 1.15 ∞
Probe positioning with respect to Phantom Shell
E.6.3 0.05 R 3 1 1 0.03 0.03 ∞
Extrapolation, interpolation and
integration Algoritms for Max. SAR Evaluation
E.5.2 5.0 R 3 1 1 2.89 2.89 ∞
Test sample Related
Test sample positioning E.4.2.1 0.03 N 1 1 1 0.03 0.03 N-1
Device Holder Uncertainty E.4.1.1 5.00 N 1 1 1 5.00 5.00 ∞
Output power Variation - SAR drift measurement
6.6.2 0.65 R 3 1 1 0.38 0.38 ∞
Phantom and Tissue Parameters
Phantom Uncertainty (Shape and thickness
tolerances) E.3.1 0.05 R 3 1 1 0.03 0.03 ∞
Liquid conductivity deviation from target value
E.3.2 5.00 R 3 0.64 0.43 1.85 1.24 ∞
Liquid conductivity - measurement uncertainty
E.3.3 5.00 N 1 0.64 0.43 3.20 2.15 ∞
Liquid permittivity - deviation from target value
E.3.2 0.03 R 3 0.6 0.49 0.01 0.01 ∞
Liquid permittivity - measurement uncertainty
E.3.3 10.00 N 1 0.6 0.49 6.00 4.90 M
Combined Standard Uncertainty
RSS 10.27 9.68 ∞
Expanded Uncertainty (95% Confidence interval)
k 20.53 19.37
Report No.: AGC00377160301EH01 Page 25 of 236
SATIMO Uncertainty System uncertainty for 450 MHz to 3.7 GHz averaged over 1 gram / 10 gram.
Uncertainty Component Sec. Tol
(+- %) Prob. Dist.
Div. Ci (1g) Ci (10g) 1g Ui (+-%)
10g Ui (+-%)
Vi
Measurement System
Probe calibration E.2.1 5.831 N 1 1 1 5.83 5.83 ∞
Axial Isotropy E.2.2 2.5 R 3 1 1 1.44 1.44 ∞
Hemispherical Isotropy E.2.2 4.0 R 3 1 1 2.31 2.31 ∞
Boundary Effects E.2.3 1.0 R 3 1 1 0.58 0.58 ∞
Linearity E.2.4 1.13 R 3 1 1 0.65 0.65 ∞
System detection limits E.2.5 1.0 R 3 1 1 0.58 0.58 ∞
Readout Electronics E.2.6 0.02 N 1 1 1 0.02 0.02 ∞
Response Time E.2.7 3.0 R 3 1 1 1.73 1.73 ∞
Integration Time E.2.8 2.0 R 3 1 1 1.15 1.15 ∞
RF ambient Conditions E.6.1 3.0 R 3 1 1 1.73 1.73 ∞
Probe positioner Mechanical Tolerance
E.6.2 2.0 R 3 1 1 1.15 1.15 ∞
Probe positioning with respect to Phantom Shell
E.6.3 0.05 R 3 1 1 0.03 0.03 ∞
Extrapolation, interpolation and integration Algoritms for
Max. SAR Evaluation E.5.2 5.0 R 3 1 1 2.89 2.89 ∞
Dipole
Dipole axis to liquid Distance
8,E.4.2 1.00 N 3 1 1 0.58 0.58 N-1
Input power and SAR drift measurement
8,6.6.2 0.65 R 3 1 1 0.38 0.38 ∞
Phantom and Tissue Parameters
Phantom Uncertainty (Shape and thickness
tolerances) E.3.1 0.05 R 3 1 1 0.03 0.03 ∞
Liquid conductivity - deviation from target value
E.3.2 5.00 R 3 0.64 0.43 1.85 1.24 ∞
Liquid conductivity - measurement uncertainty
E.3.3 5.00 N 1 0.64 0.43 3.20 2.15 ∞
Liquid permittivity - deviation from target value
E.3.2 0.03 R 3 0.6 0.49 0.01 0.01 ∞
Liquid permittivity - measurement uncertainty
E.3.3 10.00 N 1 0.6 0.49 6.00 4.90 M
Combined Standard Uncertainty
RSS 8.99 8.31
Expanded Uncertainty (95% Confidence interval)
k 17.97 16.62
Report No.: AGC00377160301EH01 Page 26 of 236
11. CONDUCTED POWER MEASUREMENT
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <1>
GSM 900
880.2 31.30 -9 22.30
897.4 31.34 -9 22.34
914.8 31.33 -9 22.33
GPRS 900
(1 Slot)
880.2 31.29 -9 22.29
897.4 31.30 -9 22.30
914.8 31.15 -9 22.15
GPRS 900
(2 Slot)
880.2 28.34 -6 22.34
897.4 28.37 -6 22.37
914.8 28.35 -6 22.35
GPRS 900
(3 Slot)
880.2 26.44 -4.26 22.18
897.4 26.43 -4.26 22.17
914.8 26.39 -4.26 22.13
GPRS 900
(4 Slot)
880.2 25.42 -3 22.42
897.4 25.44 -3 22.44
914.8 25.38 -3 22.38
EGPRS 900
(1 Slot)
880.2 26.32 -9 17.32
897.4 26.36 -9 17.36
914.8 26.30 -9 17.30
EGPRS 900
(2 Slot)
880.2 23.45 -6 17.45
897.4 23.44 -6 17.44
914.8 23.41 -6 17.41
EGPRS 900
(3 Slot)
880.2 22.50 -4.26 18.24
897.4 22.53 -4.26 18.27
914.8 22.49 -4.26 18.23
EGPRS 900
(4 Slot)
880.2 21.67 -3 18.67
897.4 21.70 -3 18.70
914.8 21.65 -3 18.65
Report No.: AGC00377160301EH01 Page 27 of 236
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <2>
GSM 900
880.2 31.29 -9 22.29
897.4 31.31 -9 22.31
914.8 31.26 -9 22.26
GPRS 900
(1 Slot)
880.2 31.21 -9 22.21
897.4 31.35 -9 22.35
914.8 31.22 -9 22.22
GPRS 900
(2 Slot)
880.2 28.32 -6 22.32
897.4 28.35 -6 22.35
914.8 28.32 -6 22.32
GPRS 900
(3 Slot)
880.2 26.37 -4.26 22.11
897.4 26.42 -4.26 22.16
914.8 26.36 -4.26 22.10
GPRS 900
(4 Slot)
880.2 25.39 -3 22.39
897.4 25.42 -3 22.42
914.8 25.36 -3 22.36
Report No.: AGC00377160301EH01 Page 28 of 236
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <1>
DCS1800
1710.2 28.29 -9 19.29
1747.4 28.31 -9 19.31
1784.8 28.28 -9 19.28
GPRS1800
(1 Slot)
1710.2 28.16 -9 19.16
1747.4 28.25 -9 19.25
1784.8 28.21 -9 19.21
GPRS1800
(2 Slot)
1710.2 25.34 -6 19.34
1747.4 25.35 -6 19.35
1784.8 25.32 -6 19.32
GPRS1800
(3 Slot)
1710.2 23.40 -4.26 19.14
1747.4 23.45 -4.26 19.19
1784.8 23.43 -4.26 19.17
GPRS1800
(4 Slot)
1710.2 22.43 -3 19.43
1747.4 22.46 -3 19.46
1784.8 22.45 -3 19.45
EGPRS1800
(1 Slot)
1710.2 25.33 -9 16.33
1747.4 25.35 -9 16.35
1784.8 25.31 -9 16.31
EGPRS1800
(2 Slot)
1710.2 23.47 -6 17.47
1747.4 23.46 -6 17.46
1784.8 23.43 -6 17.43
EGPRS1800
(3 Slot)
1710.2 23.57 -4.26 19.31
1747.4 23.59 -4.26 19.33
1784.8 23.54 -4.26 19.28
EGPRS1800
(4 Slot)
1710.2 20.76 -3 17.76
1747.4 20.80 -3 17.80
1784.8 20.78 -3 17.78
Report No.: AGC00377160301EH01 Page 29 of 236
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <2>
DCS1800
1710.2 28.27 -9 19.27
1747.4 28.29 -9 19.29
1784.8 28.24 -9 19.24
GPRS1800
(1 Slot)
1710.2 28.15 -9 19.15
1747.4 28.20 -9 19.20
1784.8 28.16 -9 19.16
GPRS1800
(2 Slot)
1710.2 25.31 -6 19.31
1747.4 25.33 -6 19.33
1784.8 25.28 -6 19.28
GPRS1800
(3 Slot)
1710.2 23.34 -4.26 19.08
1747.4 23.43 -4.26 19.17
1784.8 23.36 -4.26 19.10
GPRS1800
(4 Slot)
1710.2 22.37 -3 19.37
1747.4 22.44 -3 19.44
1784.8 22.42 -3 19.42
Note 1: The Frame Power (Source-based time-averaged Power) is scaled the maximum burst average power based on time slots. The calculated methods are show as following: Frame Power = Max burst power (1 Up Slot) – 9 dB Frame Power = Max burst power (2 Up Slot) – 6 dB Frame Power = Max burst power (3 Up Slot) – 4.26 dB Frame Power = Max burst power (4 Up Slot) – 3 dB Note 2: SAR is not required for GPRS (1 Slot) Mode because its output power is less than of Voice Mode
Report No.: AGC00377160301EH01 Page 30 of 236
UMTS BAND I
Mode Frequency(MHz) Avg. Burst Power (dBm)
WCDMA 2100 RMC(12.2bps)
1922.4 23.31
1950 23.34
1977.6 23.31
HSDPA
Subtest 1
1922.4 22.37
1950 22.36
1977.6 22.33
HSDPA
Subtest 2
1922.4 22.28
1950 22.30
1977.6 22.25
HSDPA
Subtest 3
1922.4 22.26
1950 22.31
1977.6 22.27
HSDPA
Subtest 4
1922.4 22.15
1950 22.20
1977.6 22.18
HSUPA
Subtest 1
1922.4 21.45
1950 21.50
1977.6 21.48
HSUPA
Subtest 2
1922.4 21.43
1950 21.46
1977.6 21.42
HSUPA
Subtest 3
1922.4 21.39
1950 21.40
1977.6 21.35
HSUPA
Subtest 4
1922.4 21.28
1950 21.33
1977.6 21.26
HSUPA
Subtest 5
1922.4 21.26
1950 21.33
1977.6 21.26
Report No.: AGC00377160301EH01 Page 31 of 236
UMTS BAND VIII
Mode Frequency (MHz) Avg. Burst Power (dBm)
WCDMA 900 RMC(12.2bps)
882.4 23.28
897.6 23.32
912.6 23.29
HSDPA
Subtest 1
882.4 22.34
897.6 22.37
912.6 22.35
HSDPA
Subtest 2
882.4 22.24
897.6 22.30
912.6 22.25
HSDPA
Subtest 3
882.4 22.27
897.6 22.31
912.6 22.26
HSDPA
Subtest 4
882.4 22.21
897.6 22.24
912.6 22.19
HSUPA
Subtest 1
882.4 21.57
897.6 21.60
912.6 21.58
HSUPA
Subtest 2
882.4 21.54
897.6 21.48
912.6 21.53
HSUPA
Subtest 3
882.4 21.45
897.6 21.50
912.6 21.47
HSUPA
Subtest 4
882.4 21.42
897.6 21.32
912.6 21.26
HSUPA
Subtest 5
882.4 21.35
897.6 21.29
912.6 21.34
Report No.: AGC00377160301EH01 Page 32 of 236
According to 3GPP 25.101 sub-clause 6.2.2 , the maximum output power is allowed to be reduced by following the table.
Table 6.1Aa: UE maximum output power with HS-DPCCH and E-DCH
UE Transmit Channel Configuration CM(db) MPR(db)
For all combinations of ,DPDCH,DPCCH HS-DPDCH,E-DPDCH and E-DPCCH
0≤ CM≤3.5 MAX(CM-1,0)
Note: CM=1 for c/ d=12/15, hs/ c=24/15.For all other combinations of DPDCH, DPCCH, HS-DPCCH,
E-DPDCH and E-DPCCH the MPR is based on the relative CM difference.
The device supports MPR to solve linearity issues (ACLR or SEM) due to the higher peak-to average ratios (PAR) of the HSUPA signal. This prevents saturating the full range of the TX DAC inside of device and provides a reduced power output to the RF transceiver chip according to the Cubic Metric (a function of the combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH).
When E-DPDCH channels are present the beta gains on those channels are reduced firsts to try to get the power under the allowed limit. If the beta gains are lowered as far as possible, then a hard limiting is applied at the maximum allowed level.
The SW currently recalculates the cubic metric every time the beta gains on the E-DPDCH are reduced. The cubic metric will likely get lower each time this is done .However, there is no reported reduction of maximum output power in the HSUPA mode since the device also provides a compensation for the power back-off by increasing the gain of TX_AGC in the transceiver (PA) device.
The end effect is that the DUT output power is identical to the case where there is no MPR in the device.
Report No.: AGC00377160301EH01 Page 33 of 236
LTE BAND
Conducted Power of LTE Band 1(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18025 18300 18575
5MHz
QPSK
1
0 0 22.35 22.39 22.35
12 0 22.39 22.26 22.24
24 0 22.24 22.35 22.26
12
0 1 22.26 22.24 22.30
6 1 22.32 22.21 22.21
13 1 22.25 22.23 22.34
25 0 1 22.20 22.34 22.32
16QAM
1
0 1 21.85 21.89 21.82
12 1 21.46 21.75 21.46
24 1 21.59 21.65 21.44
12
0 2 21.53 21.54 21.47
6 2 21.62 21.48 21.52
13 2 21.54 21.67 21.59
25 0 2 21.48 21.72 21.63
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18050 18300 18550
10MHz
QPSK
1
0 0 22.37 22.38 22.34
24 0 22.25 22.26 22.26
49 0 22.26 22.34 22.35
25
0 1 22.34 22.35 22.31
12 1 22.29 22.24 22.24
25 1 22.35 22.26 22.28
50 0 1 22.30 22.32 22.23
16QAM
1
0 1 21.65 21.67 21.73
24 1 21.58 21.54 21.65
49 1 21.54 21.58 21.54
25
0 2 21.49 21.59 21.42
12 2 21.43 21.53 21.53
25 2 21.53 21.52 21.44
50 0 2 21.62 21.54 21.40
Report No.: AGC00377160301EH01 Page 34 of 236
Conducted Power of LTE Band 1(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18075 18300 18525
15MHz
QPSK
1
0 0 22.35 22.37 22.40
37 0 22.27 22.34 22.27
74 0 22.29 22.26 22.32
37
0 1 22.26 22.15 22.25
19 1 22.35 22.24 22.34
38 1 22.24 22.39 22.29
75 0 1 22.30 22.35 22.32
16QAM
1
0 1 21.85 21.83 21.73
37 1 21.85 21.54 21.64
74 1 21.49 21.62 21.58
37
0 2 21.75 21.57 21.51
19 2 21.64 21.51 21.43
38 2 21.59 21.59 21.62
75 0 2 21.63 21.43 21.59
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18100 18300 18500
20MHz
QPSK
1
0 0 22.43 22.46 22.43
49 0 22.38 22.43 22.26
99 0 22.26 22.35 22.37
50
0 1 22.35 22.32 22.35
25 1 22.24 22.28 22.24
50 1 22.39 22.37 22.31
100 0 1 22.32 22.40 22.35
16QAM
1
0 1 21.75 21.79 21.80
49 1 21.64 21.68 21.65
99 1 21.68 21.57 21.57
50
0 2 21.59 21.52 21.64
25 2 21.63 21.64 21.73
50 2 21.52 21.53 21.59
100 0 2 21.48 21.67 21.62
Report No.: AGC00377160301EH01 Page 35 of 236
Conducted Power of LTE Band 3 (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19207 19575 19943
1.4MHz
QPSK
1
0 0 22.39 22.41 22.34
2 0 22.40 22.37 22.32
5 0 22.35 22.35 22.37
3
0 0 22.26 22.26 22.26
1 0 22.14 22.34 22.38
3 0 22.34 22.39 22.25
6 0 1 22.26 22.30 22.24
16QAM
1
0 1 21.65 21.67 21.60
2 1 21.35 21.58 21.57
5 1 21.43 21.53 21.53
3
0 1 21.48 21.51 21.54
1 1 21.28 21.36 21.49
3 1 21.45 21.43 21.42
6 0 2 21.38 21.50 21.53
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19215 19575 19935
3MHz
QPSK
1
0 0 22.38 22.39 22.34
7 0 22.40 22.26 22.26
14 0 22.26 22.35 22.31
8
0 1 22.39 22.31 22.34
4 1 22.22 22.27 22.21
8 1 22.34 22.25 22.38
15 0 1 22.21 22.30 22.26
16QAM
1
0 1 21.67 21.69 21.67
7 1 21.58 21.53 21.53
14 1 21.49 2157 21.48
8
0 2 21.53 21.54 21.56
4 2 21.26 21.48 21.50
8 2 21.38 21.43 21.49
15 0 2 21.42 21.48 21.52
Report No.: AGC00377160301EH01 Page 36 of 236
Conducted Power of LTE Band 3(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19225 19575 19925
5MHz
QPSK
1
0 0 22.39 22.40 22.34
12 0 22.25 22.35 22.21
24 0 22.37 22.26 22.16
12
0 1 22.24 22.34 22.30
6 1 22.16 22.28 22.25
13 1 22.28 22.23 22.28
25 0 1 22.30 22.25 22.15
16QAM
1
0 1 21.75 21.82 21.73
12 1 21.64 21.46 21.58
24 1 21.69 21.55 21.64
12
0 2 21.53 21.47 21.53
6 2 21.69 21.43 21.61
13 2 21.58 21.59 21.58
25 0 2 21.43 21.60 21.53
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19250 19575 19900
10MHz
QPSK
1
0 0 22.34 22.37 22.38
24 0 22.26 22.25 22.26
49 0 22.31 22.34 22.35
25
0 1 22.25 22.32 22.20
12 1 22.35 22.32 22.24
25 1 22.32 22.20 22.25
50 0 1 22.29 22.16 22.06
16QAM
1
0 1 21.55 21.60 21.53
24 1 21.64 21.64 21.48
49 1 21.25 21.58 21.43
25
0 2 21.64 21.53 21.62
12 2 21.49 21.49 21.37
25 2 21.43 21.51 21.40
50 0 2 21.38 21.59 21.38
Report No.: AGC00377160301EH01 Page 37 of 236
Conducted Power of LTE Band 3 (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19275 19575 19875
15MHz
QPSK
1
0 0 22.39 22.28 22.32
37 0 22.27 22.26 22.26
74 0 22.36 22.30 22.24
37
0 1 22.31 22.24 22.21
19 1 22.15 22.21 22.25
38 1 22.20 22.15 22.28
75 0 1 22.28 22.29 22.30
16QAM
1
0 1 21.72 21.68 21.73
37 1 21.75 21.54 21.54
74 1 21.26 21.53 21.34
37
0 2 21.34 21.59 21.68
19 2 21.53 21.52 21.43
38 2 21.46 21.66 21.57
75 0 2 21.49 21.60 21.64
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19300 19575 19850
20MHz
QPSK
1
0 0 22.42 22.46 22.45
49 0 22.35 22.58 22.37
99 0 22.32 22.43 22.26
50
0 1 22.26 22.59 22.35
25 1 22.33 22.62 22.24
50 1 22.38 22.47 22.33
100 0 1 22.26 22.51 22.37
16QAM
1
0 1 21.56 21.64 21.64
49 1 21.32 21.77 21.57
99 1 21.43 21.53 21.53
50
0 2 21.47 21.59 21.69
25 2 21.49 21.62 21.48
50 2 21.62 21.43 21.43
100 0 2 21.43 21.48 21.61
Report No.: AGC00377160301EH01 Page 38 of 236
Conducted Power of LTE Band 7 (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20775 21100 21425
5MHz
QPSK
1
0 0 22.39 22.42 22.43
12 0 22.24 22.15 22.27
24 0 22.26 22.12 22.21
12
0 1 22.11 22.26 22.26
6 1 22.25 22.35 22.10
13 1 22.30 22.29 22.26
25 0 1 22.28 22.30 22.33
16QAM
1
0 1 21.55 21.64 21.67
12 1 21.44 21.53 21.54
24 1 21.57 21.57 21.58
12
0 2 21.41 21.42 21.53
6 2 21.43 21.48 21.49
13 2 21.43 21.33 21.51
25 0 2 21.36 21.65 21.37
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20800 21100 21400
10MHz
QPSK
1
0 0 22.34 22.38 22.40
24 0 22.28 22.26 22.37
49 0 22.35 22.34 22.26
25
0 1 22.32 22.27 22.25
12 1 22.26 22.15 22.30
25 1 22.19 22.26 22.18
50 0 1 22.23 22.09 22.21
16QAM
1
0 1 21.64 21.69 21.67
24 1 21.57 21.54 21.53
49 1 21.48 21.53 21.28
25
0 2 21.42 21.48 21.34
12 2 21.49 21.57 21.16
25 2 21.35 21.42 21.20
50 0 2 21.31 21.53 21.18
Report No.: AGC00377160301EH01 Page 39 of 236
Conducted Power of LTE Band 7 (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20825 21100 21375
15MHz
QPSK
1
0 0 22.34 22.40 22.37
37 0 22.26 22.37 22.24
74 0 22.39 22.26 22.26
37
0 1 22.24 22.05 22.34
19 1 22.26 22.19 22.16
38 1 22.31 22.23 22.23
75 0 1 22.20 22.15 22.20
16QAM
1
0 1 21.55 21.64 21.57
37 1 21.44 21.47 21.46
74 1 21.57 21.59 21.53
37
0 2 21.42 21.53 21.58
19 2 21.48 21.62 21.42
38 2 21.44 21.59 21.49
75 0 2 21.26 21.50 21.62
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20850 21100 21350
20MHz
QPSK
1
0 0 22.44 22.47 22.45
49 0 22.25 22.38 22.37
99 0 22.32 22.42 22.40
50
0 1 22.39 22.16 22.26
25 1 22.24 22.30 22.15
50 1 22.16 22.29 22.31
100 0 1 22.30 22.36 22.39
16QAM
1
0 1 21.75 21.73 21.64
49 1 21.64 21.44 21.57
99 1 21.58 21.38 21.51
50
0 2 21.62 21.64 21.58
25 2 21.54 21.52 21.53
50 2 21.53 21.49 21.49
100 0 2 21.42 21.53 21.60
Report No.: AGC00377160301EH01 Page 40 of 236
Conducted Power of LTE Band 20(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24175 24300 24425
5MHz
QPSK
1
0 0 22.42 22.43 22.40
12 0 22.35 22.38 22.26
24 0 22.26 22.27 22.40
12
0 1 22.30 22.16 22.15
6 1 22.29 22.31 22.26
13 1 22.35 22.35 22.30
25 0 1 22.18 22.28 22.29
16QAM
1
0 1 21.75 21.79 21.64
12 1 21.54 21.65 21.54
24 1 21.68 21.64 21.58
12
0 2 21.52 21.58 21.52
6 2 21.59 21.53 21.43
13 2 21.53 21.68 21.69
25 0 2 21.60 21.40 21.50
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24200 24300 24400
10MHz
QPSK
0
0 0 22.39 22.40 22.37
24 0 22.40 22.37 22.26
49 0 22.33 22.24 22.24
25
0 1 22.26 22.16 22.25
12 1 22.31 22.23 22.21
25 1 22.29 22.30 22.29
50 0 1 22.34 22.36 22.31
16QAM
0
0 1 21.65 21.79 21.54
24 1 21.58 21.56 21.61
49 1 21.54 21.58 21.58
25
0 2 21.43 21.52 21.43
12 2 21.61 21.46 21.30
25 2 21.75 21.40 21.58
50 0 2 21.59 21.38 21.43
Report No.: AGC00377160301EH01 Page 41 of 236
Conducted Power of LTE Band 20(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24225 24300 24375
15MHz
QPSK
1
0 0 22.42 22.44 22.40
37 0 22.38 22.37 22.31
74 0 22.36 22.28 22.38
37
0 1 22.20 22.35 22.27
19 1 22.29 22.16 22.16
38 1 22.37 22.20 22.35
75 0 1 22.29 22.35 22.30
16QAM
1
0 1 21.69 21.64 21.67
37 1 21.54 21.59 21.54
74 1 21.48 21.33 21.52
37
0 2 21.53 21.54 21.48
19 2 21.47 21.47 21.53
38 2 21.40 21.45 21.31
75 0 2 21.36 21.59 21.52
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24250 24300 24350
20MHz
QPSK
1
0 0 22.46 22.50 22.48
49 0 22.28 22.46 22.35
99 0 22.35 22.35 22.36
50
0 1 22.39 22.29 22.39
25 1 22.40 22.43 22.34
50 1 22.37 22.35 22.42
100 0 1 22.42 22.37 22.43
16QAM
1
0 1 21.72 21.75 21.67
49 1 21.84 21.48 21.48
99 1 21.69 21.53 21.53
50
0 2 21.53 21.59 21.49
25 2 21.44 21.64 21.50
50 2 21.66 21.42 21.35
100 0 2 21.43 21.35 21.46
Report No.: AGC00377160301EH01 Page 42 of 236
The following tests were conducted according to the test requirements outlined in section 6.2 of the 3GPP TS36.101 specification. UE Power Class: 3 (23 +/- 2dBm). The allowed Maximum Power Reduction (MPR) for the maximum output power due to higher order modulation and transmit bandwidth configuration (resource blocks) is specified in Table 6.2.3.3-1 of the 3GPP TS36.101.
Table 6.2.3.3-1 Maximum Power Reduction (MPR) for Power class3
Modulation Maximum Power Reduction (MPR) for Power[RB]
MPR(dB) 1.4MHz 3.0MHz 5MHz 10MHz 15MHz 20MHz
QPSK >5 >4 >8 >12 >16 >18 ≤1
16QAM ≤5 ≤4 ≤8 ≤12 ≤16 ≤18 ≤1
16QAM >5 >4 >8 >12 >16 >18 ≤2
The allowed A-MPR values specified below in Table 6.2.4.3-1 of 3GPP TS36.101 are in addition to the allowed MPR requirements. All the measurements below were performed with A-MPR disabled, by using Network Signaling Value of “NS_01”.3
Report No.: AGC00377160301EH01 Page 43 of 236
Table 6.2.4.3-1: Additional Maximum Power Reduction (A-MPR) / Spectrum Emission requirements
Network Signaling
value
Requirements (sub-clause)
E-UTRA Band Channel
bandwidth (MHz)
Resources Blocks (NRB)
A-MPR (dB)
NS_01 6.6.2.1.1 Table 5.2-1 1.4,3,5,10,15,20 Table 5.4.2-1 N/A
NS_03 6.6.2.2.3.1 2,4,10, 23, 25,35,36
3 >5 ≤ 1
5 >6 ≤ 1
10 >6 ≤ 1
15 >8 ≤ 1
20 >10 ≤ 1
NS_04 6.6.2.2.3.2 41 5 >6 ≤1
10, 15, 20 Table 6.2.4.3-4
NS_05 6.6.3.3.3.1 1 10,15,20 ≥ 50 ≤ 1
NS_06 6.6.2.2.3.3 12, 13, 14, 17 1.4, 3, 5, 10 Table 5.4.2-1 N/A
NS_07 6.6.2.2.3.3 6.6.3.3.3.2
13 10 Table 6.2.4.3-2 Table 6.2.4.3-2
NS_08 6.6.3.3.3.3 19 10, 15 > 44 ≤ 3
NS_09 6.6.3.3.3.4 21 10, 15 > 40 ≤ 1
> 55 ≤ 2
NS_10 20 15, 20 Table 6.2.4.3-3 Table 6.2.4.3-3
NS_11 6.6.2.2.1
6.6.3.3.13 231
1.4, 3, 5, 10,15,20
Table 6.2.4.3-5 Table 6.2.4.3-5
NS_12 6.6.3.3.5 26 1.4, 3, 5 Table 6.2.4.3-6 Table 6.2.4.3-6
NS_13 6.6.3.3.6 26 5 Table 6.2.4.3-7 Table 6.2.4.3-7
NS_14 6.6.3.3.7 26 10, 15 Table 6.2.4.3-8 Table 6.2.4.3-8
NS_15 6.6.3.3.8 26 1.4, 3, 5, 10, 15 Table 6.2.4.3-9 Table 6.2.4.3-10
Table 6.2.4.3-9, Table 6.2.4.3-10
NS_16 6.6.3.3.9 27 3, 5, 10 Table 6.2.4.3-11, Table 6.2.4.3-12,
Table 6.2.4.3-13
NS_17 6.6.3.3.10 6.6.3.3.11
28 28
5, 10 Table 5.4.2-1 N/A
5 ≥ 2 ≤ 1
NS_18 10, 15, 20 ≥ 1 ≤ 4
NS_19 10, 15, 20 Table 6.2.4.3-15 Table 6.2.4.3-15
NS_20 5, 10, 15, 20 Table 6.2.4.3-14 Table 6.2.4.3-14
…
NS_20 - - - - -
Report No.: AGC00377160301EH01 Page 44 of 236
12. TEST RESULTS
12.1. SAR Test Results Summary 12.1.1. Test position and configuration
Head SAR was performed with the device configured in the positions according to IEEE1528,IEC/EN62209-1, and Body SAR was performed with the device 15mm from the phantom according to IEC/EN62209-2.
12.1.2. Operation Mode 1 For GSM900, the power control is set to Maximum Power Class. For GPRS 900(GMSK, CS1), the power
control level is set to Maximum Power Class. For E-GPRS 900(GMSK: MCS1, 8PSK:MCS5), the power control is set to Maximum Power Class. For DCS 1800, the power control is set to Maximum Power Class. For GPRS 1800(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 1800 (GMSK: MCS1, 8PSK:MCS5), the power control level is set to Maximum Power Class.
This is a multi-slot class 12 device capable of 4 uplink timeslots. During the head SAR test, the device was transmitting with maximum 1 uplink timeslot; during the body SAR test, it was transmitting with maximum 4 uplink timeslots. Additionally, this device doesn’t support dual transfer mode (DTM)
Testing with the headset was performed at the position and channels that resulted in the highest body SAR. This testing was performed with GPRS transmitting with 2/3/4 uplink timeslots. In the Body SAR test result table, body-worn means display of device down, body-front means display of device up.
2 For WCDMA, head and body SAR is tested under RMC 12.2k mode with power control set all up bits SAR for
AMR is not required since its power is less than RMC. For HSDPA/HSUPA, SAR is test with its maximum power mode.
3 The following test measurement is LTE procedure: a) Largest channel bandwidth standalone SAR test requirements
(a1) QPSK with 1 RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB
offset and required test channel combination with the highest maximum output power for RB offsets at
the upper edge, middle and lower edge of each required test channel.
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining RB offset configurations and required
test channels is not required for 1 RB allocation; otherwise, SAR is required for the remaining required
test channels and only for the RB offset configuration with the highest output power for that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB
offset configurations for that required test channel.
(a2) QPSK with 50% RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 50% RB allocation at the worst
position for 1 RB allocation in a1)
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining RB offset configurations and required test
channels is not required for 50% RB allocation; otherwise, SAR is required for the remaining required test
channels and only for the RB offset configuration with the highest output power for that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB offset
configurations for that required test channel.
(a3) QPSK with 100% RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 100% RB allocation at the
worst position for 1 RB&50%RB allocation in a1&a2)
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining channels is not required for 100% RB
Report No.: AGC00377160301EH01 Page 45 of 236
allocation; otherwise, SAR is required for the remaining channels and only for the highest output power for
that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for low,mid,high
channel.
(a4) Higher order modulations
For each modulation besides QPSK; e.g., 16-QAM, 64-QAM, apply the QPSK procedures in above
sections to determine the QAM configurations that may need SAR measurement. For each configuration
identified as required for testing, SAR is required only when the highest maximum output power for the
configuration in the higher order modulation is > ½ dB higher than the highest maximum output power in
QPSK or when the measured SAR for the QPSK configuration is > 1.8W/kg.
b) Other channel bandwidth standalone SAR test requirements
For the other channel bandwidths used by the device in a frequency band, apply all the procedures
required for the largest channel bandwidth in section 4.1) to determine the channels and RB
configurations that need SAR testing and only measure SAR when the highest maximum output power of
a configuration requiring testing in the smaller channel bandwidth is > ½ dB higher than the highest
maximum output power of the largest channel bandwidth configuration or the measured SAR of a
configuration for the largest channel bandwidth is > 1.8 W/kg.
4 Sensors have no any influence on power level or SAR result. 5. The portion of the device which area scan did not scan has been off the phantom.
Report No.: AGC00377160301EH01 Page 46 of 236
12.1.3. Antenna Location: ( back view )
EUT Top Edge
EUT Right Edge EUT Left Edge
EUT Bottom Edge
GSM&WCDMA <E Antenna
BT&WIFI &GPS Antenna
Diversity Antenna
Report No.: AGC00377160301EH01 Page 47 of 236
12.1.4. SAR Test Results Summary SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 58.5
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: GSM900 with GMSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/Kg)
SIM 1 Card
Left Cheek voice 37 897.4 -0.02 0.167 32.00 31.34 0.194 2.0
Left Tilt voice 37 897.4 0.15 0.117 32.00 31.34 0.136 2.0
Right Cheek voice 975 880.2 -0.08 0.238 32.00 31.30 0.280 2.0
Right Cheek voice 37 897.4 0.14 0.194 32.00 31.34 0.226 2.0
Right Cheek voice 124 914.8 0.36 0.203 32.00 31.33 0.237 2.0
Right Tilt voice 37 897.4 0.28 0.092 32.00 31.34 0.107 2.0
Body back voice 37 897.4 0.05 0.218 32.00 31.34 0.254 2.0
Body back GPRS-2 slots 37 897.4 0.07 0.289 29.00 28.37 0.334 2.0
Body back GPRS-3 slots 37 897.4 1.05 0.292 27.00 26.43 0.333 2.0
Body back GPRS-4 slots 37 897.4 -0.01 0.352 26.00 25.44 0.400 2.0
Body Front GPRS-4 slots 37 897.4 0.14 0.298 26.00 25.44 0.339 2.0
Body back GPRS-4 slots with Ear.
37 897.4 0.20 0.349 26.00 25.44 0.397 2.0
SIM 2 Card
Right Cheek voice 975 880.2 -0.05 0.235 32.00 31.29 0.277 2.0
Body back GPRS-4 slots 37 897.4 -0.01 0.349 26.00 25.42 0.399 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 48 of 236
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 52.6
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: DCS1800 with GMSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/Kg)
SIM 1 Card
Left Cheek voice 512 1710.2 -0.03 0.153 29.00 28.29 0.180 2.0
Left Cheek voice 698 1747.4 0.16 0.127 29.00 28.31 0.149 2.0
Left Cheek voice 885 1784.8 0.09 0.104 29.00 28.28 0.123 2.0
Left Tilt voice 698 1747.4 0.25 0.028 29.00 28.31 0.033 2.0
Right Cheek voice 698 1747.4 -0.05 0.124 29.00 28.31 0.145 2.0
Right Tilt voice 698 1747.4 -0.01 0.033 29.00 28.31 0.039 2.0
Body back voice 698 1747.4 0.45 0.264 29.00 28.31 0.309 2.0
Body back GPRS-2 slots 698 1747.4 0.27 0.365 26.00 25.35 0.424 2.0
Body back GPRS-3 slots 698 1747.4 0.35 0.381 24.00 23.45 0.432 2.0
Body back GPRS-4 slots 698 1747.4 0.18 0.420 23.00 22.46 0.476 2.0
Body Front GPRS-4 slots 698 1747.4 -0.02 0.406 23.00 22.46 0.460 2.0
Body back GPRS-4 slots with Ear.
698 1747.4 0.19 0.423 23.00 22.46 0.479 2.0
SIM 2 Card
Left Cheek voice 512 1710.2 -0.04 0.145 29.00 28.27 0.172 2.0
Body back GPRS-4 slots with Ear.
698 1747.4 -0.12 0.407 23.00 22.44 0.463 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 49 of 236
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 55.5
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: WCDMA Band I with QPSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg)
SIM 1 Card
Left Cheek RMC12.2kbps 9750 1950 -0.03 0.067 24.00 23.34 0.078 2.0
Left Tilt RMC12.2kbps 9750 1950 0.16 0.026 24.00 23.34 0.030 2.0
Right Cheek RMC12.2kbps 9612 1922.4 -0.05 0.128 24.00 23.31 0.150 2.0
Right Cheek RMC12.2kbps 9750 1950 0.27 0.113 24.00 23.34 0.132 2.0
Right Cheek RMC12.2kbps 9888 1977.6 0.10 0.130 24.00 23.31 0.152 2.0
Right Tilt RMC12.2kbps 9750 1950 0.09 0.017 24.00 23.34 0.020 2.0
Body back RMC12.2kbps 9750 1950 1.00 0.179 24.00 23.34 0.208 2.0
Body front RMC12.2kbps 9750 1950 -0.02 0.165 24.00 23.34 0.192 2.0
Body back HSPA 9750 1950 -0.07 0.177 23.00 22.36 0.205 2.0
Body back RMC12.2kbps+Ear. 9750 1950 0.14 0.173 24.00 23.34 0.201 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 50 of 236
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 58.5
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: WCDMA Band VIII with QPSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg)
SIM 1 Card
Left Cheek RMC12.2kbps 2788 897.6 0.23 0.101 24.00 23.32 0.118 2.0
Left Tilt RMC12.2kbps 2788 897.6 0.16 0.086 24.00 23.32 0.101 2.0
Right Cheek RMC12.2kbps 2712 882.4 -0.05 0.179 24.00 23.28 0.211 2.0
Right Cheek RMC12.2kbps 2788 897.6 -0.04 0.166 24.00 23.32 0.194 2.0
Right Cheek RMC12.2kbps 2863 912.6 0.17 0.198 24.00 23.29 0.233 2.0
Right Tilt RMC12.2kbps 2788 897.6 -0.05 0.078 24.00 23.32 0.091 2.0
Body back RMC12.2kbps 2788 897.6 0.12 0.153 24.00 23.32 0.179 2.0
Body front RMC12.2kbps 2788 897.6 -0.09 0.123 24.00 23.32 0.144 2.0
Body back HSPA 2788 897.6 0.01 0.152 23.00 22.37 0.176 2.0
Body back RMC12.2kbps+Ear. 2788 897.6 0.05 0.151 24.00 23.32 0.177 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 51 of 236
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 54.2
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band 1
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power Drift
(<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek 1 0 18300 1950 0.02 0.056 23 22.46 0.063 2.0
Left Tilt 1 0 18300 1950 0.15 0.007 23 22.46 0.008 2.0
Right Cheek
1 0 18100 1930 -0.09 0.121 23 22.43 0.138 2.0
Right Cheek
1 0 18300 1950 0.36 0.149 23 22.46 0.169 2.0
Right Cheek
1 0 18500 1970 0.24 0.121 23 22.43 0.138 2.0
Right Tilt 1 0 18300 1950 0.00 0.015 23 22.46 0.017 2.0
Body back 1 0 18300 1950 0.17 0.151 23 22.46 0.171 2.0
Body front 1 0 18300 1950 -0.04 0.149 23 22.46 0.169 2.0
Body back+Ear.
1 0 18300 1950 -0.07 0.169 23 22.46 0.191 2.0
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 53.3
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band 3
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power Drift
(<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek
1 0 19575 1747.5 -0.06 0.186 23 22.46 0.211 2.0
Left Tilt 1 0 19575 1747.5 0.18 0.040 23 22.46 0.045 2.0
Right Cheek
1 0 19300 1720 -0.05 0.322 23 22.42 0.368 2.0
Right Cheek
1 0 19575 1747.5 0.24 0.303 23 22.46 0.343 2.0
Right Cheek
1 0 19850 1775 1.00 0.323 23 22.45 0.367 2.0
Right Tilt 1 0 19575 1747.5 -0.06 0.084 23 22.46 0.095 2.0
Body back 1 0 19575 1747.5 0.29 0.360 23 22.46 0.408 2.0
Body front 1 0 19575 1747.5 0.35 0.314 23 22.46 0.356 2.0
Body back+Ear.
1 0 19575 1747.5 0.04 0.361 23 22.46 0.409 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 52 of 236
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 60.1
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band 7
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power Drift
(<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek 1 0 21100 2535 0.05 0.035 23 22.47 0.040 2.0
Left Tilt 1 0 21100 2535 0.18 0.011 23 22.47 0.012 2.0
Right Cheek
1 0 20850 2510 -0.02 0.030 23 22.44 0.034 2.0
Right Cheek
1 0 21100 2535 0.16 0.056 23 22.47 0.063 2.0
Right Cheek
1 0 21350 2560 0.37 0.017 23 22.45 0.019 2.0
Right Tilt 1 0 21100 2535 0.24 0.013 23 22.47 0.015 2.0
Body back 1 0 21100 2535 0.19 0.126 23 22.47 0.142 2.0
Body front 1 0 21100 2535 -0.05 0.122 23 22.47 0.138 2.0
Body back+Ear.
1 0 21100 2535 0.12 0.130 23 22.47 0.147 2.0
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 54.8
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band 20
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power Drift
(<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek 1 0 24300 847 -0.05 0.060 23 22.50 0.067 2.0
Left Tilt 1 0 24300 847 0.17 0.053 23 22.50 0.059 2.0
Right Cheek
1 0 24250 842 -0.02 0.084 23 22.46 0.095 2.0
Right Cheek
1 0 24300 847 0.16 0.090 23 22.50 0.101 2.0
Right Cheek
1 0 24350 852 -0.03 0.088 23 22.48 0.099 2.0
Right Tilt 1 0 24300 847 -0.09 0.052 23 22.50 0.058 2.0
Body back 1 0 24300 847 0.21 0.103 23 22.50 0.116 2.0
Body front 1 0 24300 847 1.02 0.082 23 22.50 0.092 2.0
Body back+Ear.
1 0 24300 847 -0.04 0.099 23 22.50 0.111 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.: AGC00377160301EH01 Page 53 of 236
Simultaneous Multi-band Transmission Evaluation: According to EN62209-2:2010 section 6.3.2, when the EUT has more than one transmission mode, there need to take Simultaneous Multi-band Transmission into consideration; (1) The EUT has WWAN antenna, BT/WLAN antenna; (2) BT and WIFI share one antenna, and cannot transmit simultaneously; (3) GSM/WCDMA and LTE can’t work at the same time; (4) GSM and GPRS/WCDMA can’t work at the same time; (5) For simultaneous transmission at head and body exposure position, 2 transmitters simultaneous
transmission was the worst state; (6) For each transmission mode, there must test separately, and then summation of peak spatial-averaged SAR
values; (7) For secondary transmitter (i.e. lower power transmitters), we use the following measurement to evaluate if
their power levels fall below a threshold level(Annex k):
Pavailable=Pth,m×(SARlim -SAR1)/ SARlim
Where Pth,m is the threshold exclusion power level;
Pavailable is the threshold value there need to be tested; SARlim is the SAR limit; SAR1 is the maximum SAR value of first transmitter mode result; Alternatively, Pth,m can be replaced by Pmax,m, which is an easier approach but leads to more restrictive power threshold;
Pavailable=Pth,m×(SARlim -SAR1)/ SARlim=20mW×(2W/Kg -0.479 W/Kg)/ 2W/Kg
=15.21mW>0.83mW(-0.81dBm) for BT
=15.21mW>4.72mW(6.74dBm) for WIFI
There is no need to test BT or WIFI and no need to evaluate simultaneous transmission.
Report No.: AGC00377160301EH01 Page 54 of 236
APPENDIX A. SAR SYSTEM CHECK DATA Test Laboratory: AGC Lab Date: Apr. 06,2016 System Check Head 900 MHz DUT: Dipole 900 MHz Type: SID 900 Communication System: CW; Communication System Band: D900 (900.0 MHz); Duty Cycle: 1:1; Conv.F=6.28 Frequency: 900 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 900 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 900 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 900
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=2.00, Y=-2.00
SAR 10g (W/Kg) 0.435844
SAR 1g (W/Kg) 0.694781
Report No.: AGC00377160301EH01 Page 55 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.7243 0.4672 0.3083 0.2050 0.1379 0.0939
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 56 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 (1800.0 MHz); Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 1800
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=1.00, Y=-1.00
SAR 10g (W/Kg) 1.192161
SAR 1g (W/Kg) 2.210259
Report No.: AGC00377160301EH01 Page 57 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.3227 1.3020 0.7493 0.4379 0.2590 0.1543
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 58 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 (2000.0 MHz); Duty Cycle: 1:1; Conv.F=5.73 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 2000
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-5.00
SAR 10g (W/Kg) 1.378254
SAR 1g (W/Kg) 2.789320
Report No.: AGC00377160301EH01 Page 59 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.8625 1.4002 0.7068 0.3600 0.1851 0.0962
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 60 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 System Check Head 835MHz DUT: Dipole 835 MHz Type: SID 835 Communication System: CW; Communication System Band: D835(835.0 MHz); Duty Cycle: 1:1; Conv.F=7.29 Frequency: 835MHz; Medium parameters used: f = 835MHz; ζ=0.91mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 835 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 835 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 835
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=-1.00, Y=0.00
SAR 10g (W/Kg) 0.385326
SAR 1g (W/Kg) 0.619634
Report No.: AGC00377160301EH01 Page 61 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5880 0.3699 0.2500 0.1703 0.1177 0.0821
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 62 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 (1800.0 MHz); Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 20.8, Liquid temperature (℃): 20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 1800
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-2.00
SAR 10g (W/Kg) 1.297960
SAR 1g (W/Kg) 2.402597
Report No.: AGC00377160301EH01 Page 63 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.5342 1.4189 0.8201 0.4793 0.2838 0.1694
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 64 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 (2000.0 MHz); Duty Cycle: 1:1; Conv.F=5.73 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 20.9, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 2000
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-1.00
SAR 10g (W/Kg) 1.397530
SAR 1g (W/Kg) 2.610231
Report No.: AGC00377160301EH01 Page 65 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.7537 1.5179 0.8651 0.4987 0.2918 0.1710
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 66 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 System Check Head 2600MHz DUT: Dipole 2600 MHz; Type: SID 2600 Communication System: CW; Communication System Band: D2600 (2600.0 MHz); Duty Cycle: 1:1; Conv.F=5.41 Frequency:2600 MHz; Medium parameters used: f = 2600 MHz; ζ=1.92mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2600 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2600 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom SAM twin phantom
Device Position Flat
Band CW 2600
Channels Middle
Signal Crest factor: 1.0
SURFACE SAR VOLUME SAR
Maximum location: X=1.00, Y=0.00
SAR 10g (W/Kg) 1.484108
SAR 1g (W/Kg) 3.331908
Report No.: AGC00377160301EH01 Page 67 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 3.3538 1.5750 0.7472 0.3564 0.1708 0.0822
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 68 of 236
APPENDIX B. SAR MEASUREMENT DATA Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Mid-Touch-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-66.00, Y=-71.00
SAR 10g (W/Kg) 0.167038
SAR 1g (W/Kg) 0.281785
Report No.: AGC00377160301EH01 Page 69 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2957 0.1689 0.1119 0.0720 0.0474 0.0338
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 70 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Mid -Tilt-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-17.00, Y=16.00
SAR 10g (W/Kg) 0.117084
SAR 1g (W/Kg) 0.170856
Report No.: AGC00377160301EH01 Page 71 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1739 0.1330 0.0925 0.0647 0.0499 0.0360
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 72 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Low- Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 880.2MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Low- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Low- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band GSM 900
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-55.00
SAR 10g (W/Kg) 0.237665
SAR 1g (W/Kg) 0.347217
Report No.: AGC00377160301EH01 Page 73 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3608 0.2647 0.1913 0.1488 0.1082 0.0790
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 74 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Mid- Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-49.00, Y=-49.00
SAR 10g (W/Kg) 0.193790
SAR 1g (W/Kg) 0.275026
Report No.: AGC00377160301EH01 Page 75 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2746 0.2143 0.1574 0.1308 0.0893 0.0682
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 76 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 High- Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 914.8 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 High- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 High- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band GSM 900
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-53.00, Y=-55.00
SAR 10g (W/Kg) 0.202700
SAR 1g (W/Kg) 0.293834
Report No.: AGC00377160301EH01 Page 77 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2949 0.2300 0.1657 0.1222 0.0887 0.0675
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 78 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Mid-Tilt-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-24.00, Y=-23.00
SAR 10g (W/Kg) 0.091789
SAR 1g (W/Kg) 0.128952
Report No.: AGC00377160301EH01 Page 79 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1280 0.0917 0.0753 0.0568 0.0439 0.0329
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 80 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM 900 Low- Touch-Right <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=6.28 Frequency: 880.2MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Low- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Low- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band GSM 900
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-55.00, Y=-50.00
SAR 10g (W/Kg) 0.234610
SAR 1g (W/Kg) 0.338101
Report No.: AGC00377160301EH01 Page 81 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3519 0.2690 0.2036 0.1424 0.1152 0.0774
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 82 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GSM900 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: GSM900; Duty Cycle: 1:8; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-8.00
SAR 10g (W/Kg) 0.217700
SAR 1g (W/Kg) 0.319891
Report No.: AGC00377160301EH01 Page 83 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3087 0.2273 0.1430 0.1090 0.0703 0.0488
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 84 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-2 Slot; Communication System Band: GSM 900;Duty Cycle:1:4.2 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 4.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-7.00
SAR 10g (W/Kg) 0.288740
SAR 1g (W/Kg) 0.413463
Report No.: AGC00377160301EH01 Page 85 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.4035 0.3164 0.2151 0.1679 0.1113 0.0772
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 86 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Worn- Back (3up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-3 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.7 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid-Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid-Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.7)
SURFACE SAR VOLUME SAR
Maximum location: X=-16.00, Y=-8.00
SAR 10g (W/Kg) 0.292330
SAR 1g (W/Kg) 0.413527
Report No.: AGC00377160301EH01 Page 87 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.4208 0.3135 0.2349 0.1542 0.1090 0.0751
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 88 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Worn- Back (4up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=-8.00
SAR 10g (W/Kg) 0.352346
SAR 1g (W/Kg) 0.514934
Report No.: AGC00377160301EH01 Page 89 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5066 0.3830 0.2746 0.1853 0.1337 0.0943
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 90 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Front (4up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Front/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=13.00, Y=-18.00
SAR 10g (W/Kg) 0.297521
SAR 1g (W/Kg) 0.423929
Report No.: AGC00377160301EH01 Page 91 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.4406 0.3264 0.2283 0.1611 0.1110 0.0781
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 92 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Worn- Back (4up) –with earphone<SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-16.00, Y=-8.00
SAR 10g (W/Kg) 0.349498
SAR 1g (W/Kg) 0.500523
Report No.: AGC00377160301EH01 Page 93 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5213 0.3934 0.2759 0.1866 0.1387 0.0934
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 94 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 GPRS 900 Mid-Body- Worn- Back (4up) <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=6.28 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-14.00, Y=-7.00
SAR 10g (W/Kg) 0.348613
SAR 1g (W/Kg) 0.513854
Report No.: AGC00377160301EH01 Page 95 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5269 0.3951 0.2669 0.1902 0.1352 0.0975
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 96 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Low-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1710.2 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-56.00
SAR 10g (W/Kg) 0.153470
SAR 1g (W/Kg) 0.253682
Report No.: AGC00377160301EH01 Page 97 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2487 0.1716 0.1222 0.0832 0.0571 0.0401
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 98 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Mid-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-49.00, Y=-52.00
SAR 10g (W/Kg) 0.126758
SAR 1g (W/Kg) 0.205076
Report No.: AGC00377160301EH01 Page 99 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2133 0.1418 0.0983 0.0704 0.0466 0.0305
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 100 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 High-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1784.8 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-55.00, Y=-55.00
SAR 10g (W/Kg) 0.103705
SAR 1g (W/Kg) 0.166567
Report No.: AGC00377160301EH01 Page 101 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1717 0.1164 0.0812 0.0599 0.0401 0.0286
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 102 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Mid-Tilt-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-63.00, Y=-53.00
SAR 10g (W/Kg) 0.028049
SAR 1g (W/Kg) 0.042378
Report No.: AGC00377160301EH01 Page 103 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0417 0.0298 0.0202 0.0141 0.0106 0.0073
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 104 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Mid-Touch -Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-56.00
SAR 10g (W/Kg) 0.123530
SAR 1g (W/Kg) 0.226511
Report No.: AGC00377160301EH01 Page 105 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1602 0.0856 0.0560 0.0350 0.0192 0.0108
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 106 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Mid-Tilt- Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38 ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-39.00
SAR 10g (W/Kg) 0.032597
SAR 1g (W/Kg) 0.050651
Report No.: AGC00377160301EH01 Page 107 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0474 0.0341 0.0223 0.0166 0.0114 0.0073
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 108 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Low-Touch-Left <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1710.2 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-53.00, Y=-55.00
SAR 10g (W/Kg) 0.145475
SAR 1g (W/Kg) 0.237755
Report No.: AGC00377160301EH01 Page 109 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2463 0.1816 0.1195 0.0802 0.0544 0.0361
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 110 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 DCS 1800 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=-37.00
SAR 10g (W/Kg) 0.263583
SAR 1g (W/Kg) 0.465788
Report No.: AGC00377160301EH01 Page 111 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.4723 0.2767 0.1796 0.1100 0.0735 0.0443
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 112 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-2 Slot; Communication System Band: DCS1800; Duty Cycle: 1:4.2; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 4.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-11.00, Y=-39.00
SAR 10g (W/Kg) 0.364854
SAR 1g (W/Kg) 0.611159
Report No.: AGC00377160301EH01 Page 113 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6291 0.4086 0.2826 0.1809 0.1138 0.0678
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 114 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Worn- Back (3up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-3 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.7; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.7)
SURFACE SAR VOLUME SAR
Maximum location: X=-11.00, Y=-40.00
SAR 10g (W/Kg) 0.381083
SAR 1g (W/Kg) 0.629637
Report No.: AGC00377160301EH01 Page 115 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6460 0.4667 0.2711 0.1750 0.1121 0.0667
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 116 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Worn- Back (4up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-8.00, Y=-48.00
SAR 10g (W/Kg) 0.419887
SAR 1g (W/Kg) 0.713933
Report No.: AGC00377160301EH01 Page 117 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.7277 0.4841 0.3115 0.1899 0.1138 0.0724
、
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 118 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Front (4up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-39.00
SAR 10g (W/Kg) 0.406151
SAR 1g (W/Kg) 0.671046
Report No.: AGC00377160301EH01 Page 119 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6967 0.4491 0.2923 0.1811 0.1199 0.0732
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 120 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Worn- Back (4up) –with earphone<SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=-39.00
SAR 10g (W/Kg) 0.422824
SAR 1g (W/Kg) 0.718251
Report No.: AGC00377160301EH01 Page 121 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.7496 0.4533 0.2928 0.1828 0.1195 0.0757
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 122 of 236
Test Laboratory: AGC Lab Date: Apr. 05,2016 GPRS 1800 Mid-Body- Worn- Back (4up) <SIM2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=5.60 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.38; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.3, Liquid temperature (℃): 22.1
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=-40.00
SAR 10g (W/Kg) 0.406530
SAR 1g (W/Kg) 0.677337
Report No.: AGC00377160301EH01 Page 123 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.7100 0.4554 0.3071 0.1773 0.1151 0.0727
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 124 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ; Duty Cycle: 1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band I Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-48.00
SAR 10g (W/Kg) 0.067336
SAR 1g (W/Kg) 0.135940
Report No.: AGC00377160301EH01 Page 125 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1307 0.0700 0.0404 0.0232 0.0131 0.0073
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 126 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid-Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band I Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-63.00, Y=-53.00
SAR 10g (W/Kg) 0.026248
SAR 1g (W/Kg) 0.040391
Report No.: AGC00377160301EH01 Page 127 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0374 0.0248 0.0185 0.0100 0.0102 0.0059
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 128 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Low-Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1922.4MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I Low-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band I Low-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA Band I
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-51.00
SAR 10g (W/Kg) 0.127586
SAR 1g (W/Kg) 0.249697
Report No.: AGC00377160301EH01 Page 129 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2619 0.1401 0.0807 0.0451 0.0249 0.0134
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 130 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid-Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band IMid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band IMid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-51.00
SAR 10g (W/Kg) 0.113449
SAR 1g (W/Kg) 0.224294
Report No.: AGC00377160301EH01 Page 131 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2358 0.1253 0.0719 0.0404 0.0220 0.0117
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 132 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I High-Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1977.6MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I High-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band I High-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA Band I
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-51.00
SAR 10g (W/Kg) 0.129654
SAR 1g (W/Kg) 0.253687
Report No.: AGC00377160301EH01 Page 133 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2663 0.1425 0.0820 0.0458 0.0256 0.0135
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 134 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid-Tilt-Right <RMC> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BAND I Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND I Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-42.00, Y=-76.00
SAR 10g (W/Kg) 0.017146
SAR 1g (W/Kg) 0.030592
Report No.: AGC00377160301EH01 Page 135 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0325 0.0207 0.0130 0.0077 0.0043 0.0021
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 136 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58;; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BAND I Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND I Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=-38.00
SAR 10g (W/Kg) 0.179390
SAR 1g (W/Kg) 0.341104
Report No.: AGC00377160301EH01 Page 137 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3640 0.2015 0.1138 0.0641 0.0356 0.0203
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 138 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid- Body- Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BAND I Mid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND I Mid-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=8.00, Y=-31.00
SAR 10g (W/Kg) 0.164805
SAR 1g (W/Kg) 0.320724
Report No.: AGC00377160301EH01 Page 139 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3374 0.1939 0.1101 0.0628 0.0341 0.0185
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 140 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid- Body- Towards Grounds (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BAND I Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND I Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=-38.00
SAR 10g (W/Kg) 0.177329
SAR 1g (W/Kg) 0.339684
Report No.: AGC00377160301EH01 Page 141 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3615 0.2044 0.1152 0.0650 0.0365 0.0205
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 142 of 236
Test Laboratory: AGC Lab Date: Apr. 07,2016 WCDMA Band I Mid- Body- Towards Grounds (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: Band I UTRA/FDD ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ=1.41mho/m; εr =40.58; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.8, Liquid temperature (℃): 22.4
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BAND I Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/WCDMA BAND I Mid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA Band I
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=-38.00
SAR 10g (W/Kg) 0.173490
SAR 1g (W/Kg) 0.330711
Report No.: AGC00377160301EH01 Page 143 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3534 0.1961 0.1112 0.0623 0.0353 0.0200
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 144 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Touch-Left (RMC ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ WCDMA BAND VIII Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-17.00
SAR 10g (W/Kg) 0.100917
SAR 1g (W/Kg) 0.142481
Report No.: AGC00377160301EH01 Page 145 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1476 0.1112 0.0838 0.0631 0.0473 0.0352
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 146 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid- Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-30.00, Y=7.00
SAR 10g (W/Kg) 0.085602
SAR 1g (W/Kg) 0.119184
Report No.: AGC00377160301EH01 Page 147 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1233 0.0936 0.0711 0.0541 0.0404 0.0304
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 148 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Low- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 882.4MHz;; Medium parameters used: f = 900 MHz; ζ=0.97mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Low-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Low-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA BAND VIII
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-54.00, Y=-53.00
SAR 10g (W/Kg) 0.178791
SAR 1g (W/Kg) 0.251372
Report No.: AGC00377160301EH01 Page 149 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2624 0.2012 0.1504 0.1104 0.0816 0.0590
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 150 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.97mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-55.00, Y=-54.00
SAR 10g (W/Kg) 0.166364
SAR 1g (W/Kg) 0.236593
Report No.: AGC00377160301EH01 Page 151 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2466 0.1870 0.1393 0.1022 0.0746 0.0545
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 152 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII High- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 912.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.97mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII High-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII High-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA BAND VIII
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-55.00, Y=-55.00
SAR 10g (W/Kg) 0.197926
SAR 1g (W/Kg) 0.283275
Report No.: AGC00377160301EH01 Page 153 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2952 0.2212 0.1638 0.1197 0.0868 0.0627
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 154 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Tilt-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-15.00
SAR 10g (W/Kg) 0.078410
SAR 1g (W/Kg) 0.108957
Report No.: AGC00377160301EH01 Page 155 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1128 0.0851 0.0638 0.0482 0.0362 0.0270
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 156 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-16.00, Y=-8.00
SAR 10g (W/Kg) 0.153210
SAR 1g (W/Kg) 0.225435
Report No.: AGC00377160301EH01 Page 157 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2333 0.1653 0.1162 0.0809 0.0560 0.0386
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 158 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Body-Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Front/ Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=14.00, Y=-8.00
SAR 10g (W/Kg) 0.123210
SAR 1g (W/Kg) 0.178979
Report No.: AGC00377160301EH01 Page 159 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1855 0.1321 0.0931 0.0649 0.0452 0.0312
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 160 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Body-Towards Ground (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-10.00, Y=-8.00
SAR 10g (W/Kg) 0.151586
SAR 1g (W/Kg) 0.223215
Report No.: AGC00377160301EH01 Page 161 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2309 0.1632 0.1146 0.0797 0.0550 0.0377
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 162 of 236
Test Laboratory: AGC Lab Date: Apr. 06,2016 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=6.28 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.97 mho/m; εr =41.69; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 23.1, Liquid temperature (℃): 22.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-10.00, Y=-8.00
SAR 10g (W/Kg) 0.150809
SAR 1g (W/Kg) 0.221867
Report No.: AGC00377160301EH01 Page 163 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2294 0.1628 0.1142 0.0794 0.0549 0.0375
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 164 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-52.00
SAR 10g (W/Kg) 0.056217
SAR 1g (W/Kg) 0.110507
Report No.: AGC00377160301EH01 Page 165 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1035 0.0571 0.0338 0.0199 0.0118 0.0068
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 166 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Tilt-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-79.00, Y=-49.00
SAR 10g (W/Kg) 0.006798
SAR 1g (W/Kg) 0.011917
Report No.: AGC00377160301EH01 Page 167 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0122 0.0072 0.0042 0.0028 0.0015 0.0007
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 168 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Low-Touch-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1930MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Low- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Low- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 1
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-55.00
SAR 10g (W/Kg) 0.120619
SAR 1g (W/Kg) 0.231621
Report No.: AGC00377160301EH01 Page 169 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2427 0.1321 0.0774 0.0441 0.0237 0.0134
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 170 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Touch-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-79.00, Y=-54.00
SAR 10g (W/Kg) 0.149333
SAR 1g (W/Kg) 0.290350
Report No.: AGC00377160301EH01 Page 171 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3079 0.1666 0.0963 0.0542 0.0302 0.0165
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 172 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 High-Touch-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1970MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 High- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 High- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 1
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-55.00
SAR 10g (W/Kg) 0.120817
SAR 1g (W/Kg) 0.232530
Report No.: AGC00377160301EH01 Page 173 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2441 0.1312 0.0757 0.0427 0.0229 0.0126
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 174 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Tilt-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-41.00, Y=-78.00
SAR 10g (W/Kg) 0.014986
SAR 1g (W/Kg) 0.027004
Report No.: AGC00377160301EH01 Page 175 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0292 0.0184 0.0110 0.0061 0.0034 0.0019
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 176 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=7.00, Y=-31.00
SAR 10g (W/Kg) 0.151109
SAR 1g (W/Kg) 0.283949
Report No.: AGC00377160301EH01 Page 177 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3033 0.1718 0.0985 0.0564 0.0324 0.0188
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 178 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=8.00, Y=-31.00
SAR 10g (W/Kg) 0.149199
SAR 1g (W/Kg) 0.279669
Report No.: AGC00377160301EH01 Page 179 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2987 0.1683 0.0965 0.0555 0.0318 0.0186
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 180 of 236
Test Laboratory: AGC Lab Date: Mar. 21,2016 LTE Band 1 Mid-Body-Back(1RB#0) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 1 ;Duty Cycle:1:1; Conv.F=5.73; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =39.95; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):20.9, Liquid temperature (℃):21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BAND 1 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE BAND 1 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band 1
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=7.00, Y=-31.00
SAR 10g (W/Kg) 0.169398
SAR 1g (W/Kg) 0.321894
Report No.: AGC00377160301EH01 Page 181 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3429 0.1964 0.1122 0.0643 0.0367 0.0210
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 182 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-51.00, Y=-48.00
SAR 10g (W/Kg) 0.186260
SAR 1g (W/Kg) 0.296422
Report No.: AGC00377160301EH01 Page 183 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.3098 0.2142 0.1482 0.1023 0.0691 0.0481
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 184 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=13.00, Y=-14.00
SAR 10g (W/Kg) 0.039893
SAR 1g (W/Kg) 0.069845
Report No.: AGC00377160301EH01 Page 185 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0741 0.0458 0.0289 0.0181 0.0117 0.0073
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 186 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Low-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1720MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Low- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Low- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 3
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-56.00
SAR 10g (W/Kg) 0.322030
SAR 1g (W/Kg) 0.602921
Report No.: AGC00377160301EH01 Page 187 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5099 0.2518 0.1435 0.0839 0.0461 0.0281
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 188 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-56.00
SAR 10g (W/Kg) 0.303179
SAR 1g (W/Kg) 0.587316
Report No.: AGC00377160301EH01 Page 189 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.4934 0.2253 0.1213 0.0656 0.0321 0.0179
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 190 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 High-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1775MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 High- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 High- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band 3
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-56.00
SAR 10g (W/Kg) 0.322715
SAR 1g (W/Kg) 0.630908
Report No.: AGC00377160301EH01 Page 191 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5350 0.2432 0.1287 0.0689 0.0321 0.0173
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 192 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=7.00, Y=32.00
SAR 10g (W/Kg) 0.083954
SAR 1g (W/Kg) 0.147126
Report No.: AGC00377160301EH01 Page 193 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1568 0.0972 0.0605 0.0381 0.0244 0.0157
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 194 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-6.00, Y=-53.00
SAR 10g (W/Kg) 0.360298
SAR 1g (W/Kg) 0.627189
Report No.: AGC00377160301EH01 Page 195 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6645 0.4080 0.2517 0.1562 0.0969 0.0600
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 196 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=9.00, Y=-32.00
SAR 10g (W/Kg) 0.313744
SAR 1g (W/Kg) 0.544302
Report No.: AGC00377160301EH01 Page 197 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.5742 0.3506 0.2141 0.1326 0.0814 0.0504
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 198 of 236
Test Laboratory: AGC Lab Date: Mar. 22,2016 LTE Band 3 Mid-Body-Back(1RB#0)-with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH
Communication System: LTE; Communication System Band: LTE Band 3; Duty Cycle: 1:1; Conv.F=5.60 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.43 mho/m; εr =40.25; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):20.8, Liquid temperature (℃):20.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band 3 Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band 3 Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band 3
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=1.00, Y=-40.00
SAR 10g (W/Kg) 0.360931
SAR 1g (W/Kg) 0.625296
Report No.: AGC00377160301EH01 Page 199 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6592 0.4049 0.2507 0.1552 0.0965 0.0597
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 200 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-48.00
SAR 10g (W/Kg) 0.035087
SAR 1g (W/Kg) 0.070820
Report No.: AGC00377160301EH01 Page 201 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0580 0.0284 0.0150 0.0084 0.0050 0.0024
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 202 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-72.00, Y=8.00
SAR 10g (W/Kg) 0.010671
SAR 1g (W/Kg) 0.022940
Report No.: AGC00377160301EH01 Page 203 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0138 0.0063 0.0032 0.0016 0.0010 0.0008
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 204 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Low-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2510MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Low-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Low-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 7
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-48.00, Y=-65.00
SAR 10g (W/Kg) 0.030284
SAR 1g (W/Kg) 0.056360
Report No.: AGC00377160301EH01 Page 205 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0584 0.0330 0.0189 0.0106 0.0063 0.0028
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 206 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-49.00, Y=-64.00
SAR 10g (W/Kg) 0.055770
SAR 1g (W/Kg) 0.105121
Report No.: AGC00377160301EH01 Page 207 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1116 0.0608 0.0340 0.0189 0.0112 0.0061
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 208 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 High-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2560MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 High-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 High-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 7
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-49.00, Y=-62.00
SAR 10g (W/Kg) 0.017313
SAR 1g (W/Kg) 0.035034
Report No.: AGC00377160301EH01 Page 209 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0375 0.0207 0.0112 0.0064 0.0030 0.0017
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 210 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=22.00
SAR 10g (W/Kg) 0.012963
SAR 1g (W/Kg) 0.028244
Report No.: AGC00377160301EH01 Page 211 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0321 0.0174 0.0089 0.0041 0.0019 0.0008
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 212 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Body-Back (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-12.00, Y=-38.00
SAR 10g (W/Kg) 0.125577
SAR 1g (W/Kg) 0.233617
Report No.: AGC00377160301EH01 Page 213 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2448 0.1346 0.0713 0.0386 0.0206 0.0109
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 214 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Body-Front (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=9.00, Y=-50.00
SAR 10g (W/Kg) 0.122363
SAR 1g (W/Kg) 0.229129
Report No.: AGC00377160301EH01 Page 215 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2426 0.1334 0.0703 0.0367 0.0192 0.0103
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 216 of 236
Test Laboratory: AGC Lab Date: Mar. 20,2016 LTE Band 7 Mid-Body-Back (1RB#0) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=5.41 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ= 1.92 mho/m; εr =39.12; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.3, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 7 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 7 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND 7
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-12.00, Y=-37.00
SAR 10g (W/Kg) 0.130070
SAR 1g (W/Kg) 0.241393
Report No.: AGC00377160301EH01 Page 217 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.2533 0.1402 0.0750 0.0405 0.0216 0.0117
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 218 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Touch-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-61.00, Y=-59.00
SAR 10g (W/Kg) 0.060205
SAR 1g (W/Kg) 0.092145
Report No.: AGC00377160301EH01 Page 219 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0953 0.0630 0.0434 0.0293 0.0203 0.0137
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 220 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Tilt-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-25.00, Y=10.00
SAR 10g (W/Kg) 0.052911
SAR 1g (W/Kg) 0.072011
Report No.: AGC00377160301EH01 Page 221 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0746 0.0580 0.0451 0.0345 0.0264 0.0203
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 222 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Low-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 842MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Low-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Low-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 20
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-54.00, Y=-51.00
SAR 10g (W/Kg) 0.083781
SAR 1g (W/Kg) 0.117161
Report No.: AGC00377160301EH01 Page 223 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1217 0.0937 0.0712 0.0531 0.0399 0.0294
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 224 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-54.00, Y=-50.00
SAR 10g (W/Kg) 0.089667
SAR 1g (W/Kg) 0.125077
Report No.: AGC00377160301EH01 Page 225 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1302 0.1004 0.0766 0.0575 0.0434 0.0322
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 226 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 High-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 852MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 High-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 High-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND 20
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-54.00, Y=-51.00
SAR 10g (W/Kg) 0.087778
SAR 1g (W/Kg) 0.123077
Report No.: AGC00377160301EH01 Page 227 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1279 0.0981 0.0745 0.0552 0.0415 0.0309
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 228 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Tilt-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=-16.00
SAR 10g (W/Kg) 0.051736
SAR 1g (W/Kg) 0.070082
Report No.: AGC00377160301EH01 Page 229 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.0724 0.0559 0.0436 0.0338 0.0263 0.0201
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 230 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Body-Back (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-12.00
SAR 10g (W/Kg) 0.102901
SAR 1g (W/Kg) 0.144809
Report No.: AGC00377160301EH01 Page 231 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1495 0.1104 0.0804 0.0582 0.0417 0.0298
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 232 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Body-Front (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=15.00, Y=-5.00
SAR 10g (W/Kg) 0.082459
SAR 1g (W/Kg) 0.114817
Report No.: AGC00377160301EH01 Page 233 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1185 0.0885 0.0655 0.0477 0.0347 0.0250
3D screen shot Hot spot position
Report No.: AGC00377160301EH01 Page 234 of 236
Test Laboratory: AGC Lab Date: Mar. 28,2016 LTE Band 20 Mid-Body-Back (1RB#0 ) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: CHEETAH Communication System: LTE; Communication System Band: LTE Band 20; Duty Cycle:1:1; Conv.F=7.29 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.91 mho/m; εr =41.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.2, Liquid temperature (℃): 21.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/09/2015; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND 20 Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND 20 Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND 20
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-7.00, Y=-13.00
SAR 10g (W/Kg) 0.098574
SAR 1g (W/Kg) 0.139298
Report No.: AGC00377160301EH01 Page 235 of 236
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.1441 0.1051 0.0759 0.0546 0.0390 0.0279
3D screen shot Hot spot position
The second hotspot is within 2dB, but the first hotspot is outside the 2dB of the SAR compliance limit.
Report No.: AGC00377160301EH01 Page 236 of 236
APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS
Refer to Attached files.
APPENDIX D. CALIBRATION DATA
Refer to Attached files.