sapquery_step_thru.pdf

8/10/2019 SAPQuery_step_thru.pdf

1/14

SAP QUERY SQ01

STEP BY STEP GUIDE

SAP Query enables data from multiple tables to be extracted in one report, as long as at least onefield of data can be linked from one table to another e.g. by Document Number.

Unlike table browser (SE16), reports from SAP Query can be saved.

You will need the required tables and fields before running SAP Query (if not known, refer to thelist of tables PDF within the Data Extraction section).

Click on the Quick Viewer button.


2/14

The next screen enables new reports to be created or saved reports to be run or amended.

Note: The Help topics at the bottom of the page are referenced to the SAP Library on InternetExplorer.


3/14

In this example we are creating a report to show all vendors for a particular Company with name,address, payment method and bank details.

This will involve joining three tables:

TableName

What it contains Fields Description(not a comprehensive list)

SAP Name

LFA1 Vendor Master VendorNameCityPostal CodeSearch TermStreetAddressCreated OnCreated ByAccount Group

LIFNRNAME1ORT01PSTLZSORTLSTRASADRNRERDATERNAMKTOKK

LFB1 Vendor Master Data by

Company

Vendor

Company CodePersonnel NumberCreated OnCreated ByReconciliation AccountPayment MethodsPayment Terms

LIFNR

BUKRSPERNRERDATERNAMAKONTZWELSZTERM

LFBK Vendor Bank Details VendorBank KeyBank account numberAccount Holder

LIFNRBANKLBANKNKOINH

Note: A query will only work with actual tables and some e.g. BSEG are too large to work with.The system will let you know if it cannot work with a specific table. When this happens, logicaldatabases should be used instead. These can be identified using transaction SE12 (See separateinstructions).


4/14

To create a new report:

Enter a name for the report in the Quickview display box.

Click Create

Enter a meaningful title for the report in the new box that has appeared.


5/14

If more than one table is to be used then select Table join from the Data source box.

Select Basis mode then, click the green tick.


6/14

On the next screen, click Insert table.

To avoid resorting fields later, tables should be entered in the correct sequence.

In this example we will display the Company data then the Address data and finally, the Bankdata.

Enter table LFB1.

Green tick.

Click Insert table again and enter the next table (LFA1).

Green tick.

Enter the last table name (LFBK).

Green tick.


7/14

The screen should now look like this.

This shows all available fields within the selected tables and all the links between them.

In this instance there is only one link between all three tables and that is the vendor number(LIFNR). The links need to be checked as sometimes they are not correct.

To check a link - right click on the line and select Display join condition. Both fields should be thesame (apart from the numbering).

To delete an incorrect join right click on the line and select Remove join condition.

To add the correct join click and drag the field from the left hand table to the corresponding fieldon the right hand table and release.

Once the tables and joins have been set, click the Green Back Arrow.


8/14

The following screen should be displayed.

On the left hand side are the tables selected.

The right hand side shows the available fields for selection / report layout.


9/14

For some reason the field name text is different to the field description on the actual table,however, the left hand screen can be expanded to display the SAP field name (which is constant)and to specify list and selection fields from each table.

As the link to vendor number has already been made, this field only has to be selected from oneof the tables. Likewise for other fields that appear more than once, they only have to be selectedonce, for where they are to appear in the report.

As each field is selected it appears on the right hand side display, when this process is completeclick on Execute.


10/14

The next screen enables the selection criteria to be entered.

If this is not as expected then go back to the previous screen and add/delete selection boxes.

Click on the options icon in the Output format area to display all available formats.

Spreadsheet is the preferred option for downloading to IDEA.

If the report is too big for this, an error message will be displayed and either SAP List Viewer orDisplay as Table can be used instead.


11/14

Select Table and Green tick.


12/14

Green tick the next screen to run the report.

A spreadsheet titled Worksheet in Basis (1) should be displayed.

Click on File, Save copy as..

Rename the file and save in the SAP download area (its a good idea to create a specific folder inyour audit directory for this purpose).


13/14

To run or change an existing query.

Click on Quick viewer.


14/14

Click the button to the left of the required query (to highlight it).

Click Change to add or remove display / selection fields.

Or click Execute if changes are not required to the fields.

This takes you to the selection screen. Selections can be entered and the report run.

sapquery_step_thru.pdf

Documents