santa&cole outdoor catalogue 2012
DESCRIPTION
Интернет-магазин www.Dreamlight.kiev.ua реализует под заказ и со склада освещение больше 500 фабрик со всего мира. Люстры, бра, торшеры, точечные светильники, шинные и трековые системы, уличное освещение Вы можете выбрать на нашем интернет-магазине "Дримлайт" в Киеве.Вы не находите в наших каталогах нужный вам товар? Обращайтесь www.Dreamlight.kiev.ua и мы поможем Вам.TRANSCRIPT
-
Outdoor Urban ligthing
www.dreamlight.kiev.ua
-
SANTACOLE.COM / Urbana Lightning
Contents
Candela Candela LED Rama Rama Garden Rama LED Va Lctea Prgola Va Lctea
-
THE CANDELA STREETLAMP IS CREATED WITH THE IDEA OF ADDING AN URBAN STREET LAMP TO OUR CATALOGUE TO LIGHT UP BIG ROADS AND AVENUES, WHICH COMPLEMENTS AND COEXISTS WITH THE RAMA STREETLAMP
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
4/11
CandelaGonzalo Mil, 2009
-
THE ARM OF THE LUMINAIRE IS PRESENTED IN TWO SIZES (75 AND 150 CM) WITH THE AIM OF ADAPTING THE DISTANCE BETWEEN THE LIGHT SOURCE AND THE COLUMN IN ACCORDANCE WITH THE TYPE OF ROAD TO BE LIGHT AND THE PRESENCE OF TREES OVERHEAD
Pl de Domeny, Girona (Spain)
Easy replacement of the lamp and of the units Convenient opening without tools Safety lock system
Easy maintenance
Flexible system (allows 2 luminaires to be positioned at the same or a different height)
Arms of different length (75 and 150 cm), to help to adapt it to any space
Optionally incorporates a 3 m arm with brace
For lighting of big roads, heights of 8, 10 and 12 mPossibility of adjusting the position of the lamp to modify
the emission of light Position -1: Asymmetric type optics Position 0: Road optics Position +1: Type II optics
Adjustment of the lamp
IP 65 luminaire IP 66 Optical unit Pressure regulator to avoid condensation on the luminai-
re and on the optical unit
Double IP protection
Life cycle of the product study: design for dismantling
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
5/11
-
The CANDELA street lamp incorporates an optical body for optimized street lighting for VSAP and HM lamps. It accepts lamps up to 400 W with a luminaire efficiency of over 75%. Optical unit Reflector in high purity drawn anodized aluminium. Diffuser in toughened transparent glass with a thickness of 5 mm which incorporates a mousse sealing in EPDM.Possibility of horizontal adjustment of the position of the lamp which allows the light distribution to be modified: Position -1: Asymmetric type optics
Luminaire
Position 0: Road optics Position +1: Type II optics Electric unit The gear-holding plate is easy to extract. Units prepared for VSAP and HM lamps.To improve the energy efficiency of the luminaire, optionally it can incorporate dual-level adjustable units.
Fastening to columnSystem formed by a clamp in two injected aluminium components joined together by stainless steel screws.
150 W / 250 W / 400 W HIT-CELamp-holder E40Power of the system 167 W / 275.5 W / 430 WLuminaire efficiency >75%Upper flux fraction 0.0%
150 W / 250 W / 400 W HST-MFLamp-holder E40Power of the system 170 W / 273.5 W / 434 WLuminaire efficiency >75%Upper flux fraction 0.0%
Lamp
Power supply 230 V - 50 HzAlimentacin 230 V - 50 Hz Degrees of protectionPressure regulator to avoid condensation in the luminaire and in the optical unit. IP 65 luminaireIP 66 optical unit IK 09 Electrical class I (Class II consult) EC marking
759 101
860
282
Urban street lamp to light up big roads with basic and tested shapes, designed so that from the road it is seen as a homogeneous element integrated in the urban landscape. Its shape, designed for its function, contains the optical and electric units in an orderly manner, prevents light pollution and its easy handling aids its maintenance. It is manufactured in aluminium injection with a painted finish, recycled and recyclable material. The Candela street lamp coexists on the same column but at different heights with the Rama street light.
The CANDELA luminaire consists of three parts: a clamp which adapts to columns with a circular cross section, an arm with a rectangular cross section of different lengths, and the oval luminaire.
Candela streetlamp
BodyThe whole unit is manufactured in recycled aluminium with painted finish. Body, lid and latch in aluminium injection finished with grey powder paint (RAL 9007). Reflector in drawn alumi-nium and diffuser in toughened glass.
ArmThe luminaire arm is presented in two sizes (75 and 150 cm) with the aim of adapting the distance between the light source and the column in accordance with the type of road to be lit up and the presence of trees overhead. On being aluminium extrusion, the arm can be adapted to any length between both measurements, or extend to 3 m, the latter incorporating a reinforcing brace.
The arm incorporates an aluminium injection clamp at one of its ends
ColumnsColumns with a height of 8.20, 10.20 or 12.20 m, with two sections of circular cross-section tube, the lower part 168 mm and the upper part 127 mm. The columns are manufactured in hot galvanized steel and painted finish for 1 or 2 luminaires at the same or a different height.
The 8.20 and 10.20 m columns are also manufactured in extruded aluminium.
Materials and finishes
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
6/11
80
80
160
240
320
400
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
100
100
200
300
400
500
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
270
0180
90
Semiplanos C
270.0
0.00.081
90.0
-
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
7/11
90
90
180
270
360
450
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
90
90
180
270
360
450
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
60
60
120
180
240
300
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
70
70
140
210
280
350
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
ngulos Gamma
270
0180
90
Semiplanos C
270.0
0.00.081
90.0
-
8,20 m 2 sections 1 medium-arm luminaire
10,20 m 2 sections 2 medium-arm luminaires at different height
8,20 m 2 sections 1 long-arm luminaire
10,20 m 2 sections 2 long-arm luminaires at different height
12,20 m 2 sections 1 medium-arm luminaire
12,20 m 2 sections 1 long-arm luminaire
1 7
2 8
3 9
4 10
5 11
6 12
8,20 m 2 sections 2 medium-arm luminaires at same height
10,20 m 2 sections 2 medium-arm luminaires at same height
8,20 m 2 sections 2 long-arm luminaires at same height
10,20 m 2 sections 2 long-arm luminaires at same height
12,20 m 2 sections 2 medium-arm luminaires at same height
12,20 m 2 sections 2 long-arm luminaires at same height
For lighting of big avenues, heights of 8, 10 and 12 m. Flexible system, allows 2 luminaires to be placed at the
same or a different height. The clamp of the unit is adjusted to the diameter of the
column of the Rama family of street lamps (127/129 cm), offering a lighting system at several heights which allows all kinds of urban projects to be tackled with an element which combines design and function.
Models
451
28
331 451331 331 451
8,00 m
8,00 m
10,00 m
10,00 m
12,00 m
12,00 m
234174
28
174 234391331
1
7
3
9
5
11
2
8
4
10
6
12
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
8/11
(8,20 m; 10,20 m) (12,20 m)
-
The change of lamp and the replacement of the units are carried out without the need for tools, in a fast and simple manner. The opening of the body is carried out with a double-effect latch placed on the front part of the luminaire, and the cover stays open thanks to a gas piston.
Maintenance
The element is delivered dismantled in four parts: the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws. The column is fixed by means of a concrete bucket ins-talled in situ and anchor bolts, 20/30 cm below the level of the finished paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.
Installation
1 luminaire with medium arm and clamp 22,5 Kg. Steel columns 140 Kg (8,20 m), 170,5 Kg (10,20 m) y 204 Kg (12,20 m)
Weights
2 Cover retention 3 Inner assembly1 Convenient, tool-free opening
4 Connector latch release 5 Lamp disconnection 6 Optical compartment opening
7 Lamp replacement
8 Lamp housing 9 Lamp adjustment
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
9/11
-
Minimization of the quantity of componentsWe obtain the maximum functionality with the minimum quantity of pieces.
PackingPacking made from Bico cardboard (70% recycled material and 100% recyclable).The packing has been conceived to minimize the transport costs as much as possible, generating a minimum volume. We can serve the different models offered by the product using only three types of packing.
Light source Replacement components with easy maintenance.Easy adaptation of the luminaire to LED technology, replacing just the cover of the luminaire with a lower one.
Design to aid assembly and dismantling Use of mechanical joints, minimization of the variety of screws. No use of adhesives (the joint and the glass are assembled by pressure).All the electric components are assembled on the base, to aid the assembly and subsequent maintenance.
Use of standard components All the electric components are standard and easily replaceable.
Use of a modular designThree basic parts: housing, arm + clamp and optical unit.Combining different parts, we can generate a family of pro-ducts (single luminaire or double luminaire with different arm lengths).
Design to aid the manufacture and recycling of the parts The aluminium injection used for three of its basic com-ponents: lid, base and clamp, allows a reduction in thick-nesses (less quantity of material), very precise tolerances, smooth surfaces and high resistance to the elements. The aluminium extrusion for the production of the arms which hold the luminaire, means there can be different arm lengths using the same production process. The aluminium allows an easy and economical reuse.
The candela street lamp has been developed improving environmental and innovation aspects throughout the products design, manufacturing and marketing process. The main aspects considered in the technical design of this product were: aid the maintenance as much as possible, be able to replace its components quickly
Life cycle of the product, design for dismantling
and simply and the recovery and reuse of the products materials and components at the end of its working life. It is therefore a design conceived to optimize the production of all its components, and their subsequent assembly and dismantling. The material used, the geometry of the parts, the surface
finish, the grouping of its components and the assembly techniques limit the quantity of the elements production processes. A series of aspects have been considered which have allowed a manufacture adapted to environmental sustainability criteria:
THE CANDELA STREET LAMP HAS BEEN DEVELOPED IMPROVING ENVIRONMENTAL AND INNOVATION ASPECTS THROUGHOUT THE PRODUCTS DESIGN, MANUFACTURING AND MARKETING PROCE
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
10/11
-
Coslada, Madrid (Spain)
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Candela
11/11
-
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS. MOREOVER, DOES NOT REQUIRE MAINTENANCE
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
12/17
Candela LEDGonzalo Mil, 2012
-
Optical unit Set of PC LEV 1700 optical lenses Electronic equipmentOffers the possibility of powering the lamp from 350 mA to 500 mA.Adjustable 1-10V or Dali power sources can be supplied as an option.
Luminaire
Fastening to columnFastening of the body with aluminium half-clamp using stainless steel screws.Luminaire installationThe luminarie is delivered assembled. The rear clamp with the screws is delivered apart with the rest of the element.
The Candela LED incorporates a LED module which allows the following options: 140W - 96 LED (500 mA -12064 lm - 3950k ) 105W - 72 LED (500 mA 9048 lm 3950 k)Luminaire efficiency >90%
Lamp
Upper flux fraction 0,0% Power suply 230 V - 50 Hz Degree of protection IP 66 Electrical Class I EC Marking
Urban street lamp to light up big roads with basic and tested shapes, designed so that from the road it is seen as a homogeneous element integrated in the urban landscape. Its shape, designed for its function, contains the optical and electric units in an orderly manner, prevents light pollution and its easy handling aids its maintenance. It is manufactured in aluminium injection with a painted finish, recycled and recyclable material.The Candela LED street lamp is composed of three pieces: a clamp which is adapted to columns with a circular cross-section, an arm with a rectangular cross-section of different lengths, and an oval-shaped luminaire.
Candela LED streetlamp
BodyThe whole unit is manufactured in recycled aluminium with painted finish.Body, lid and latch in aluminium injection finished with grey powder paint (RAL 9007). Internal dissipator in aluminium extrusion black anodized finish and diffuser in toughened glass. ArmThe luminaire arm is presented in two sizes (75 and 150 cm) with the aim of adapting the distance between the light source and the column in accordance with the typeof road to be lit up and the presence of trees overhead.
On being aluminium extrusion, the arm can be adapted toany length between both measurements, or extend to 3 m, the latter incorporating a reinforcing brace. The arm incor-porates an aluminium injection clamp at one of its ends. ColumnsColumns with a height of 8.20 or 10.20, withtwo sections of circular cross-section tube, the lower part 168 mm and the upper part 127 mm.The columns are manufactured in hot galvanized steel and painted finish for 1 or 2 luminaires at the same or a different height. The 8.20 and 10.20 m columns are also manufactured in extruded aluminium.
Materials and finishes
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
13/17
250
250
500
750
1000
1250
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
Angle Gamma
270
90
0180
CSemiplans
270.0
90.0
0.0
759101
860
100
282
THE INCORPORATION OF LED TECHNOLOGY MANAGES TO REDUCE THE THICKNESS OF THE LUMINAIRE AND FAVOURS ITS INTEGRATION INTO THE URBAN LANDSCAPE
-
THE CANDELA STREETLAMP HAS BEEN DEVELOPED IMPROVING ENVIRONMENTAL AND INNOVATION ASPECTS THROUGHOUT THE PRODUCTS DESIGN, MANUFACTURING AND MARKETING PROCESS
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
14/17
-
For lighting of big avenues, heights of 8 and 10 m. Flexible system, allows 2 luminaires to be placed at the same or a different height. The clamp of the unit is adjusted to the diameter of the column of the Rama family of street lamps (127/129 cm), offering a lighting system at several heights which allows all kinds of urban projects to be tackled with an element which combines design and function.
Models
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
15/17
8,20 m 2 sections 1 medium-arm luminaire
8,20 m 2 sections 2 medium-arm luminaires at same height
8,20 m 2 sections 1 long-arm luminaire
8,20 m 2 sections 2 long-arm luminaires at same height
10,20 m 2 sections 1 medium-arm luminaire
1 6
2 7
3 8
4 9
5 10
10,20 m 2 sections 1 long-arm luminaire
10,20 m 2 sections 2 long-arm luminaires at same height
10,20 m 2 sections 2 medium-arm luminaires at same height
10,20 m 2 sections 2 medium-arm luminaires at different height
10,20 m 2 sections 2 long-arm luminaires at different height
(8 m)
(10 m)
28
8,00 m
10,00 m
5 76 8 9 10
170 240320 470 320 395
8,00 m
10,00 m
28
1 32 4
170 240 320 470
-
Maintenance
The element is delivered dismantled in four parts:the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws.The column is fixed by means of a concrete bucket insta-lled in situ and anchor bolts, 20/30 cm below the levelof the finished paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.
This luminaire does not require maintenance.
Installation
Luminaire 14,5 Kg. Stainless steel columns 140 Kg (8,20 m), 170,5 Kg (10,20 m)
Weights
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
16/17
Minimization of the quantity of componentsWe obtain the maximum functionality with the minimum quantity of pieces.
PackingPacking made from Bico cardboard (70% recycled material and 100% recyclable).The packing has been conceived to minimize the transport costs as much as possible, generating a minimum volume. We can serve the different models offered by the product using only three types of packing
Design to aid assembly and dismantlingUse of mechanical joints, minimization of the variety of screws. No use of adhesives (the joint and the glass are assembledby pressure). All the electric components are assembled on the base, to aid the assembly and subsequent maintenance.
Use of standard componentsAll the electric components are standard and easily replaceable.
Use of a modular designThree basic parts: housing, arm + clamp and optical unit. Combining different parts, we can generate a family of pro-ducts (single luminaire or double luminaire with different arm lengths).
Design to aid the manufacture and recyclingof the partsAluminium injection used for three of its basic compo-nents: lid, base and clamp. Allows a reduction in thick-nesses (less quantity of material), very precise tolerances, smooth surfaces and high resistance to the elements.Aluminium extrusion for the production of the arms which hold the luminaire. Means there can be different arm lengths using the same production process. The aluminium allows an easy and economical reuse.
The candela street lamp has been developed improving environmental and innovation aspects throughout the products design, manufacturing and marketing process. The main aspects considered in the technical design of this product were: aid the maintenance as much and simply and the recovery and reuse of the products mate-
Life cycle of the product, design for dismantling
rials and components at the end of its working life. It is therefore a design conceived to optimize the production of all its components, and their subsequent assembly anddismantling. The material used, the geometry of the parts, the surface as possible, be able to replace its components quickly
finish, the grouping of its components and the assembly techniques limit the quantity of the elements productionprocesses. A series of aspects have been considered which have allowed a manufacture adapted to environmental sustainability criteria:
-
THE COMBINATION OF RAMA AND CANDELA STREET LAMPS OFFERS A LIGHTING SYSTEM AT VARIOUS HEIGHTS WHICH ALLOWS ALL TYPES OF URBAN PROJECTS TO BE COVERED
SANTACOLE.COM / Outdoor / Lightning / Streetlamps / Candela LED
17/17
-
URBAN LUMINAIRE WHICH OFFERS LOW CONSUMPTION AND THE INSTALLATION OF AN OPTIONAL NUMBER OF LUMINAIRES PLACED AT DIFFERENT HEIGHTS AND POSITIONS
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
18/23
Rama Gonzalo Mil, 2000
-
SANTA & COLE APPLIES THE MOST DEMANDING SUSTAINABILITY CRITERIA FOR THE LIGHTING OF PUBLIC SPACES: RATIONAL ENERGY USE, EFFICIENCY AND ENERGY SAVING, THE USE OF LOW-CONSUMPTION HIGH-EFFICIENCY LAMPS AVOIDING SKY GLOW AND LIGHT POLLUTION
Barcelona (Spain)
19/23
Polyamide or aluminium injection1
Lighting at different heights 2
Colours3
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
-
This street lamp is a tree of light created with a three-fold objective: for ground-projected lighting, reduced consumption and an optional number of luminaires at different heights and in different positions.
Luminaire for outdoor lighting designed to house high pressure sodium vapour, metal halide or compact fluores-cent luminaires. Dual level units for control line can be included as an option.The Rama luminaire is presented in two models which are distinguished by the change of material in their manufacture: polyamide or injected aluminium.
Rama Streetlamp
BodyLuminaire and fastening clamp in aluminium injection or luminaire and fastening clamp in grey or brown polyamide injection.Aluminium reflector and diffuser in toughened glass. ColumnsTubular column with circular cross section of different diameters and heights (depending on reference). Allows several luminaires to be fixed (1, 2 or 5).4.70m / 185.1or 6.20m / 244.1high and 127 mm / 5 diameter grey painted columns in hot-galvanized steel or anodized aluminium, for 1 or 2 luminaires at the same or different heights.
8m / 315 high double-section grey painted columns of hot galvanized steel with a of 152 mm / 6 in the lower part and a of 127 mm / 5 in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights.6.20m / 244,1 or 8.20m / 322.9 high double-section columns with a of 152 mm / 6in hot-galvanized steel and painted tube in the lower part and a of 129 mm / 5,1 in stainless steel AISI 304 polished finish tube in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights (for the 8.20m / 323 column).
Materials and finishes
Fastening to column Fastening of the body with aluminium or polyamide half- clamp using stainless steel screws. The gear-holding plate is easy to extract. Units prepared for VSAP and HM lamps. To improve the energy efficiency of the luminaire, optionally it can incorporate dual-level adjustable units.
Luminaire
Installation of the luminaire The luminaire is delivered assembled. It is opened in the upper part with a turn latch. The lid is attached to the body with a gas piston which aids the maintenance. It incorporates mousse sealing in EPDM. The assembly instructions are enclosed with the street lamp. 20
20/23
Polyamide injection Aluminium injection
Aluminium injection Colours:RAL - 9007 (dark grey) / RAL - 7024 (grafita grey)
Polyamide injection Colours:RAL - 8014 (brown) / RAL - 9007 (dark grey) / RAL - 5023 (blue)
11601087 76
9898
200
200
1160
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
1160 mm / 45.7 1160 mm / 45.7
98 m
m /
3,
8
98 m
m /
3,
8
20
0 m
m /
7,
9
20
0 m
m /
7,
9
-
21/23
70W / 100W / 150W HIT-CE Lamp-holder E27 / E40 / E40 G12 (USA) Power of the system 84W / 115W / 167W Luminaire efficiency 77.64% Upper flux fraction 0.0%
70W / 100W / 150W HST-MF Lamp-holder E27 / E40 / E40 E26 / E39 (USA) Power of the system 83W / 115W / 170W Luminaire efficiency 71.36% Upper flux fraction 0.0%
Lamp
70W/150W HIT-DE-CELamp-holder Rx7sPower of the system 84W / 167WLuminaire efficiency 77.42%Upper flux fraction 0.0%
70W/150 W HST-DELamp-holder Rx7sPower of the system 83W / 170WLuminaire efficiency 71.22%Upper flux fraction 0.0%
57W/70W TC-QELLamp-holder GX24q - 5 / 6Power of the system 63W / 77WLuminaire efficiency 58.13%Upper flux fraction 0.0%
Power supply 230V- 50 Hz (EC) 120/277 V - 50/60 Hz (USA) Degree of protection IP-66 Electrical class I (Class II consult) EC Marking - Certificate UL (Aluminium model)
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
Maximum 384.70 cd/KlmPosition C=0.00 G=60.00Productivity nl = 71.22%FHS rate = 0.02%
-
22/23
Usual replacements and maintenance for the units.
Maintenance
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm / 7,9 below the paving. The foundations must foresee the groove for the electric connection.The unit is delivered dismantled. The assembly instructions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column.Optional AISI 304 stainless steel wall support.
Installation
1 luminaire / 2 luminaire (Polyamide) 8 Kg / 17,7 lb. 13,5 Kg / 29,8 lb 1 luminaire / 2 luminaire (Aluminium) 14 Kg / 30,9 lb. 24 Kg / 52,9 lb
Weights
2 luminaires at diferent height
Rama Aluminium (1) and Rama Polyamide (2)
(1)
(2)
Rama Aluminium interior
Sealing joint
1 luminaire 2 luminaires at same height
Clamping piston Upper closing
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
-
Luminaire Rama polyamide Luminaire Rama aluminium injection
Models
23/23
4,70 m / 185,1 1 section 1 luminaire
1
4,70 m / 185,1 1 section 2 luminaire
2
6,20 m / 244,1 1 section 1 luminaire
3
6,20 m / 244,1 1 section 2 luminaire at same height
4
6,20 m / 244,1 2 sections 2 luminaires at different height
5
6,20 m / 244,1 2 sections 1 luminaire
6
7 6,20 m / 244,1 2 sections 2 luminaires at same height
9 8,20 m / 323 2 sections 1 luminaire
8 6,20 m / 244,1 2 sections 2 luminaires at different height
10 8,20 m / 323 2 sections 2 luminaires at same height
11 8,20 m / 323 2 sections 2 luminaires at different height
12 8,20 m / 323 2 sections 5 luminaires
(4,70 m /185,1) (6,20 m /244,1) (8,20 m /323)
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama
4,50 m /177,2
6,00 m / 236,2
8,00 m / 315
1 2
3 4 5 6 7 8
116 cm /45,7
4,50 m /177,2
6,00 m / 236,2
8,00 m / 315
9 10 11 12
72
216 cm /85,1
216 cm /85,1
216 cm /85,1
201
cm /
79
,2
216 cm /85,1
216 cm /85,1
216 cm /85,1
216 cm /85,1
116 cm /45,7
116 cm /45,7
20 c
m /
7,9
20 c
m /
7,9
116 cm /45,7
20 c
m /
7,9
20 c
m /
7,9
20 c
m /
7,9
60 c
m /
23,7
70 c
m /
27,6
70 c
m /
27,6
65 cm 25,6
80 cm 31,5
90 cm 35,5
-
THE RAMA GARDEN STREET LAMP IS DESIGNED TO LIGHT UP LANDSCAPED SPACES AT LOW LEVELS. REPLACES THE CLAMP FASTENING TO THE COLUMN WITH A DIRECT INTEGRATION AT THE END OF THE COLUMN, GENERATING A CONTINUOUS ELEMENT WITHOUT JOINTS IN TWO VERSIONS, SINGLE OR DOUBLE
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
24/27
Rama Garden Gonzalo Mil, 2011
-
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS
25/27
Use of LED Technology: energy saving 1
Does not require maintenance 2
Lighting at lower levels 3
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
-
Optical unit Set of PC LEV 1700 optical lenses. Electronic equipmentOffers the possibility of powering the lamp from 350 mA to 500 mA.Adjustable 1-10V or Dali power sources can be supplied as an option. Fastening to columnFastening of the body to the column with three stainless steel screws.
Luminaire
Installation of the luminaireThe luminaire is delivered assembled. It is not necessary to open the unit to install the luminaire. A connector housed in the lower part of the body allows easy installation. Santa & Cole will maintain the guarantee provided that the body of the luminaire is not opened. The assembly instructions are enclosed with the street lamp.
The RAMA GARDEN is the adaptation of the Rama street light to LED technology. Over 50,000 hours of life with high luminous efficacy, linear regulation of flow and minimum maintenance. The slimmer aluminium extru-sion body replaces the clamp fastening to the column with a direct integration at the end of the column.
The body of the luminaire, whether single or double, is made in a single piece, without intermediate joints, and is coupled to the column at a right angle, a pure shape even simpler than its predecessor. The body of the luminaire is in aluminium extrusion, recycled and recyclable material, anodized finish.
Rama Garden Streetlamp
BodyThe body of the luminaire has a rectangular cross-section 119x65mm in recycled aluminium extrusion, anodized finish, and the end covers are in aluminium injection with grey painted finish. Internal dissipator in aluminium extrusion black anodized finish. Methacrylate diffuser. ColumnsColumns with a height of 3.70 and 5.20 m, circular cross-section tube of 114mm in aluminium extrusion, anodized finish, for 1 or 2 luminaires at the same height.
Materials and finishes
26/27
Lamp
The Rama Garden incorporates a LED modulewhich allows the following options:
25W - 24 LED (350 mA) Power of the system 27W
35W - 24 LED (500 mA) Power of the system 39W
Luminaire efficiency >90%Upper flux fraction 0.0%
Power supply 230 V - 50 Hz Degree of protection IP grupo ptico 66 Electrical class I (Clase II consult) EC marking
900
1610
6519
019
065
Single luminaire
Maximum value: 362,48 cd/KlmPosition: C=345.00 G=50.00
Double luminaire
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
-
27/27
This luminaire does not require maintenance
Maintenance
The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20 cm below the paving. The foundations must foresee the groove for the electric connection.The unit is delivered dismantled. The assembly instruc-tions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column.
Installation
Single luminaire 5.2 Kg Double luminaire 10.4 Kg Columns 37.0 / 5.20 m 16 Kg / 21 Kg
Weights
Images from the inside of the luminaire
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama Garden
3,70 m 1 section 1 single luminaire
1
3,70 m 1 section 1 double luminaire
2
3 5,20 m 1 section 1 single luminaire
4 5,20 m 1 section 1 double luminaire
Models
3,50 m
5,00 m
19
90 161 90 161
1 2
3 4
6520
60
-
THE RAMA LED STREETLAMP PROMOTES ENERGY SAVING AND MINIMIZES LIGHT POLLUTION. ITS HIGH EFFICIENCY IS ABOVE THAT OF CONVENTIONAL LAMPS. ACCEPTS THE POSSIBILITY OF ADJUSTING ITS INTENSITY
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
28/33
Rama LED Gonzalo Mil and Santa & Cole team, 2011
-
29/33
Use of LED Technology: energy saving 1
Does not require maintenance 2
Lighting at different levels3
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
-
Optical unit Set of PC LEV 1700 optical lenses. Electronic equipmentOffers the possibility of powering the lamp from 350 mA to 500 mA.Adjustable 1-10V or Dali power sources can be supplied as an option. Fastening to columnFastening of the body with aluminium half-clamp using stainless steel screws.
Luminaire
Installation of the luminaireThe luminaire is delivered assembled. The rear clamp is delivered separately together with the screws necessary. It is not necessary to open the unit to install the luminaire. A connector housed in the outer part of the body allows easy installation. Santa & Cole will maintain the guarantee provided that the body of the luminaire is not opened. The assembly instructions are enclosed with the street lamp.
The Rama LED incorporates a LED modulewhich allows the following options:
25W - 24 LED (350 mA) Power of the system 27W
35W - 24 LED (500 mA) Power of the system 39W
Lamp
50W - 48 LED (350 mA) Power of the system 54W
70W - 48 LED (500 mA) Power of the system 78W
Luminaire efficiency >90%Upper flux fraction 0.0%
Power supply 230V - 50Hz Degree of protection IP optical unit 66 Electrical class I (Class II consult) EC marking
The intensity of the light emitted can be adjusted according to the needs of the urban environment, thus allowing a notable energy saving.
Technical upgrade and energy improvement of the Rama luminaire for outdoor lighting, which allows energy consumption to be optimized by incorporating LED technology which improves the luminous efficacy. The maintenance tasks are likewise reduced.
Rama LED Streetlamp
BodyBody in recycled aluminium extrusion, anodized finish, with clamp and injection cover in aluminium injection with grey painted finish. Internal dissipator in aluminium extrusion black anodized finish. Methacrylate diffuser.
ColumnsColumn with circular cross section of different diameters and heights (depending on reference). Allows several luminaires to be fixed (1, 2 or 5).4.70 or 6.20 m high and 127 mm diameter grey painted columns in hot-galvanized steel or anodized aluminium, for 1 or 2 luminaires at the same or different heights.
8m high double-section grey painted columns of hot galvanized steel with a of 152 mm in the lower part and a of 127 mm in the upper part, for 1 or 2 luminaires at the same or different heights, or for 5 luminaires at different heights.6.20 or 8.20m high double-section columns with a of 152 mm in hot-galvanized steel and painted tube in the lower part and a of 129 mm in stainless steel AISI 304 polished finish tube in the upper part, for 1 or 2 luminai-res at the same or different heights, or for 5 luminaires at different heights (for the 8.20 m column).
Materials and finishes
30/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Maximum value: 362,48 cd/KlmPosition: C=345.00 G=50.00
-
31/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
4,70 m 1 section 1 luminaire
1
4,70 m 1 section 2 luminaire
2
6,20 m 1 section 1 luminaire
3
6,20 m 1 section 2 luminaires at same height
4
6,20 m 2 sections 2 luminaires at different height
5
8,20 m 2 sections 5 luminaires
6
Models
4,50 m
6,00 m
8,00 m
20
1 2
3 4 5
6
90 90164 164 164
19
65
2060
80
2070
90
2070
72
(4,70 m) (6,20 m) (8,20 m)
-
This luminaire does not require maintenance
Maintenance
The column is fixed by means of a concrete bucket installed in situ and anchor bolts 20 cm below the paving. The foundations must foresee the groove for the electric connection.The unit is delivered dismantled. The assembly instruc-tions are enclosed with the street lamp. The template and the anchor bolts are delivered with the column.
Installation
Luminaire 9,2 Kg
Weights
32/33
LONG WORKING LIFE, OVER 50,000 HOURS, TRIPLING THE AVERAGE WORKING LIFE OF THE MAJORITY OF THE PRESENT-DAY DISCHARGE LAMPS. MOREOVER, DOES NOT REQUIRE MAINTENANCE
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
Images from the inside of the luminaire
-
33/33
SANTACOLE.COM / Outdoor / Lighting / Streetlamps / Rama LED
-
THE VA LCTEA STREETLAMP WAS DESIGNED TO DRAW LINES OF LIGHT IN THE SKY
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Va Lctea
34/37
Va Lctea Enric Batlle and Joan Roig, 1990
Viladecans, Barcelona (Spain)
-
35/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Va Lctea
Versatile street lamp with simple, geometric, lines, conceived to draw lines of light in the sky. Its structure allows nume- rous alignments and lines of light to be created. Combined
with the Va Lctea Pergola, they create large shaded areas during the day and lit areas at night. Support and luminaire form a single body. The column,
with a square cross-section in the lower part, becomes forked, forming a 90 angle in the upper part. The luminaire is arranged perpendicular to the support.
Va Lctea
It has a 150 x 100 mm rectangular-base column with control hatch and 100 x 50 mm forked support made in hot-galvanized structural steel painted finishes.It has a rectangular screen (simple for one lamp or double for two lamps), made of the same material.
Materials and finishes
Normal part replacement and maintenance.
Maintenance
Simple: 103 Kg. Double: 118 Kg.
Weights
The streetlamp is delivered disassembled in two components: the column and the screen with the lamp.Assembly instructions are included with the street lamp.The column is fixed using a concrete cube made on site and anchor bolts, 20 cm below the ground. The foundations should provide a slot for the electrical connection.Anchorage bolts, pattern and moulding come with the column.
The column with double shade cannot be installed in isolation; it must be fixed to another luminaire at one of its ends.
Installation
Generate light lines
Numerous alignments
Combinable with the Va Lctea Pergola
1
2
3
-
36/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Va Lctea
Va Lctea Street lamp with one lamp Va Lctea Street lamp with two lamps
Models
13770
365
90
171
22
13770
365
90
342
22
The luminaire is a portafluorescentes for 2 58 W tubular lamp.As an option, lights can be delivered for a unique tube of 58W.
Luminaire
Lamp 58W T26 IP protection IP-66 Electrical class I EC marking
Lamp
90
0180
270
Semiplans C
90.0
0.0
270.0
40
40
80
120
160
200
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
Angle Gamma
Barcelona (Spain)
-
37/37
SANTACOLE.COM / Outdoor / Urban Elements / Streetlamps / Va Lctea
Sant Cugat del Valls Barcelona (Spain)
-
THIS IS A MODULAR PERGOLA, WITH MANY COMPOSITIONAL POSSIBILITIES, WHICH CREATES LARGE SHADED AREAS DURING THE DAY AND LIT AREAS AT NIGHT WHEN USED TOGETHER WITH THE VA LCTEA STREETLAMP
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Va Lctea
38/41
Va Lctea Pergola Enric Batlle and Joan Roig, 1990
Nus de la Trinitat, Barcelona (Spain)
-
39/41
Very simple and functional urban element by day and by night. The slatted wooden roof forms shaded areas during the day and combined with the Via Lctea street lamp it
lights up the urban space when night falls. Its modular structure allows different compositions to be created, adaptable to all kinds of spaces.
Pergola Va Lctea
StructureStructure made with galvanized steel sections painted with powder paint. CoverSlatted roof made with autoclave treated red pine wooden slats. The Red Pine wood comes from the central area of Sweden. This wood has classification V in the General
Rules for the Classification of Swedish Sawn Red Pine and Fir Timber established by the 1958 Committee for the classification of Timber. This wood is obtained complying with all the legal and environmental regulations of the country of origin, ensuring the sustainability of the woods and avoiding the environmental impact. This wood does not come from primary forests. With the aim of
protecting red pine wood in the face of risk classes 1 to 4 described in standard EN 335-1-92 and EN 335-92, an autoclave treatment is applied.
All the fastening bolts of the slats are in steel with anti-rust protection.
Materials and finishes
Normal part replacement and maintenance.
Maintenance
Initial module: 844 Kg Intermediate module: 725 Kg
Weights
The pergola is supplied disassembled in five components: the column, the pergola structure, the wooden grid, the screen and the lamps. The pergola optionally can be delivered without light. Installation is completely mechanical, without welding, and uses stainless steel screws.The column is fixed using concrete cube made in situ and screws with mechanical block, 20 cm below the ground level. The foundation should provide a slot for the electrical connection. The hub cab and anchor screws are delivered with the columns.Assembly instructions are included with the pergola.
Installation
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Va Lctea
65mts special Prgola Via Lctea for Santurce city council, Pas Basco (Spain)
-
40/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Va Lctea
Models
Fluorescent lights for two tube lamps of 58 W.As an option, lights can be delivered for a unique tube of 58 W.
Luminaire
Lamp 58W T26IP Protection IP-66Electrical class ICE Marking
Lamp
40
40
80
120
160
200
0 15 035130
4545
6060
7575
9090
105105
120180
cd/klm
Angle Gamma90
0180
270
Semiplans C
90.0
0.0
270.0
EACH MODULE OFFERS A SURFACE AREA OF 18m OF SHADE DURING THE DAY AND LINEAR LIGHTING AT NIGHT, USING FLUORESCENCE AS THE LIGHT SOURCE
2
370
365
362
70
120 480
90
362
70
120 497
22
370
Without light With light
22
-
41/41
SANTACOLE.COM / Outdoor / Urban Elements / Pergolas / Va Lctea
Viladecans, Barcelona (Spain) Mallorca (Spain)
Viladecans, Barcelona (Spain)
-
SANTACOLE.COM
MAIN OFFICEParc de Belloch Ctra. C-251, Km. 5,6E-08430 La Roca, BarcelonaT. +34 938 619 100General: [email protected]: [email protected]: [email protected]
FRANCEToulouse Showroom45 Alles Jean Jaurs31000 ToulouseT. +33 562 877 [email protected]
SPAINSalesT. +34 902 460 [email protected]
After-salesT. +34 902 460 [email protected]
INTERNATIONALSalesT. +34 938 619 [email protected]
After-salesT. +34 938 444 [email protected]
USASanta & Cole Inc.2005 Charleston Trace30075 Roswell, GA, [email protected]