sandvik dr410i rotary / dth blast hole drill › globalassets › ... · rotary / dth blast hole...
TRANSCRIPT
TECHNICAL SPECIFICATION
SANDVIK DR410iROTARY / DTH BLAST HOLE DRILL
Sandvik DR410i is a diesel-powered, self-propelled, crawler-mounted blasthole drill for surface mining. It is standard equipped for rotary with optionaldown-the-hole (DTH) hammer drilling power.
HIGHER PRODUCTIVITY THROUGH INNOVATIONSandvik DR410i uses a CAN bus controlled hydraulic system to monitor the machine, allowing for timely preventative maintenance while delivering higher availability.
RUGGED DESIGNSandvik DR410i is equipped to drill 152 to 251 millimeter (6 to 9.875 inch) diameter blastholes with first-pass capacity of 10 meters (33 feet) with the standard mast or 14 meters (46 feet) with the extended mast option.
BUILT TO LASTHeavy-duty undercarriage designed for mining.
INNOVATION FOR SAFER OPERATIONPipes can be handled from within the cab using the Sandvik carousel and breakout system,with optional Hands free bits changing capability.
OPERATOR COMFORT AND CONTROLThe ergonomically-designed cab includes controls and touchscreen integrated into the operators seat, angled windows to reduce glare and a safari-style roof to keep the cab cooler.
EASIER ACCESSAn optional hydraulic main-access stairway can be mounted to provide a parallel step onto and off the drill.
DESIGNED WITH SAFETY IN MINDWe designed Sandvik DR410i with worldwide standards in mind, such as Mining Design Guidelines (MDG) for mobile and transportable equipment in mines, Earth Moving Equipment Safety Round Table (EMESRT) Design Philosophies, ISO 3449 Level II and CE conformity marking.
COMPRESSOR MANAGEMENT Advanced compressor management reduces the compressor load allowing the operator to manage air volumes and pressures to maximize efficiency and reduce fuel burn reducing your CO2 footprint and extending engine and compressor life
PERFORMANCE
Metric Imperial
Hole diameter 152 - 251 mm 6.00 - 9.875 in.
First pass hole depth (Std. Mast)
10 m 33 ft.
First pass hole depth (Ext. Mast)
14 m 46 ft.
Max. hole depth (Std. mast)
46.6 m 153 ft.
Max. hole depth (Ext. mast)
32.3 m 106 ft.
Max. pull down force 222.4 kN 50,000 lbf.
Weight on bit 258 kN 58,000 lbf.
Feed rate 0-49 m/min. 0-160 ft./min.
UNDERCARRIAGE
Metric Imperial
Model S31HD
Track shoe width 750 mm 26.5 in
Track shoe type Triple grouser
Width over tracks 3,867 mm 152.24 in
Tram speed 2.3 / 3.4 kmph 1.4 / 2.1 mph
Gradeability 20°
HYDRAULIC SYSTEM
Metric Imperial
Reservoir capacity 757 lit. 200 gal.
Reservoir pressure 0.3 - 0.5 bar 5-7 psi
FEED
Metric Imperial
Feed type Twin cylinders and chain drive
Chain type Heavy-duty roller type chains with heavy side bars and through hardened pins
Rated pull down force 222.4 kN 50,000 lbf.
Feed down rate 0-25.6 m/min. 84 ft./min.
Rated pull back force 106.8 kN 24,000 lbf.
Feed up rate 0-49 m/min. 0-160 ft./min.
Chain adjustment Manually adjusted pins - Standard
Auto - w/ hydraulic cylinders - Option
MAST
Metric Imperial
Construction CAD/FEA designed, rectangular tubing, welded recessed side members reinforced in high-
stress areas
Pivot bushings Alloy steel bushings
Mast raising cylinders 2
Angle drilling 0-30° for Standard mast0-20° for Ext. mast
Hoist 17.8 kN 4,000 lbf.
Mast locking 2 hydraulic actuated pins
Pipe loader 4 pod loader for Standard mast2 pod loader for Extended mast
POWER GROUP
Metric Imperial
Engine options:
Cummins QSK19 (Non tier 4) 563 kW 755 HP
CAT C18 (Non tier 4) 521 kW 700 HP
CAT C18 (Tier 4) 563 kW 755 HP
Compressor options:
Rotary drilling 45.3 m³/min @ 6.9 bar
1600 SCFM @ 100 psi
DTH drilling 41 m³/min @ 24.1 bar
1450 SCFM @ 350 psi
Air pressure 24.1 bar 350 psi
Advanced Compressor management
Standard
Fuel tank 1,514 lit. 400 gal.
Ambient operating range -40°C to 50°C -40°F to 122°F
FRAME AND INTEGRAL JACKS
Metric Imperial
Main frame CAD/FEA designed, wideflange beam main rails w/
heavy cross bracing reinforced at high-stress areas
Walkways Slip resistant FRP Grating on all maintenance areas
Leveling jacks - Standard 4 (2 on rear and 2 on front)
Pad diameter 762 mm 30 in.
Pad to ground clearance 560 mm 22 in.
SANDVIK DR410i2
OPERATOR’S CAB
Certification FOPS as per ISO 3449 Level II
Sound level 80 dB or less
Operator's seat Fully adjustable and swiveling (180°) with adjustable height,
lumbar support and pnuematic suspension, shoulder type 3
point seat belt
Helper's seat Fixed; with seat belt
Camera monitor Standard for tramming
HVAC
Defrost on front, rear and drilling windows
Heat ducts to feet and air to operators face ambient temp.
range -40°C to +50°C
Cabin pressurization HEPA cabin filter with alarm
Sunshades Standard on all glasses
AM/FM/Sirius XM radio Standard w/ bluetooth connectivity
CONTROL SYSTEM
System CAN bus with SICA operating platform
Safety Interlock Functional safety interlocks for safer operation and to prevent
machine damage
ROTARY HEAD
Metric Imperial
Rotary power 111.9 kW 150 HP
Speed / torque (Std.) 8,340 N-m @ 130 rpm
6,150 ft lbs @ 130 rpm
Speed / torque (Option) 10,250 N-m @ 107 rpm
7,558 ft lbs @ 107 rpm
Speed / torque (Option) 6,780 N-m @ 160 rpm
5,000 ft lbs@ 160 rpm
Bull shaft thread 5.5” API REG.
SANDVIK DR410i 3
OPERATOR’S CONTROLS
Location Seat mounted Left hand control panel and Right hand control
panel for all drill functions
GUI Seat mounted touch screen and key pads
DUST SUPPRESSION
Metric Imperial
Dry dust collector 127.5 m³/min. 4,500 CFM
Water injection (w/ DC) 757 lit. 200 gal.
Water injection (w/o DC) 1,893 lit. 500 gal.
Water pump 34 lpm 9 GPM
Dust hood Hyd. Cylinder actuated dust door and curtains
STANDARD FEATURES
Lighting 12 LED lights
Chain lubrication Electric operated from cab
Central lubrication Electric operated automatic
Thread lubrication Electric operated from cab
Cameras 2 for tramming 1 for pipe handling
Safety features Emergency Stops near allladders and main elec. enclosure
Pull type cable stop on mast Fuel fill isolator on fluid
service center
Fluid service center Remote fill points for : Fuel, Hyd. Oil, Central lube,
Chain lube, coolantRemote drain points for:
Engine oil, Hyd. Oil, compressor oil, coolant
Strobe lights 2 (on Mast and on Frame)
Oil Sampling Live SOS sampling Pointsfor engine, compressor,
coolant, pump drive
SANDVIK DR410i4
OPTIONS
Radio remote For Tramming and Hoist
Mast access FRP infill and Lifeline on mastMast access ladder on frame
Machine access ladder Self levelling hyd. cylinderactuated ladder
Wash down Pressure water wash hose reel
Hammer lube 114 lit. (30 gal.) tank for DTH drilling
Cab extension deck On cab side for maintenance
Deck crane For bit and hammer handling
Diagnostics package Sensor package for key pump parameters for the ease of troubleshooting
ARCTIC PACAKGE
Genset 25kW
Heaters - Hydraulic- Water
- Chain Lube- Pump Drive
- Compressor oil- Engine coolant
- Engine oil
Insulation wrap On water pump, Receiver tank
AUTOMATION FEATURES
Standard Automine(R) OnboardTM Auto LevelAuto mast
Navigation TIM3D GPS Navigation
Teleremote Remote operation
Options Auto drill, Auto pipe handling
DIMENSIONS AND WEIGHT
Metric Imperial
Length - Mast up 11.25 m 36 ft. 11 in.
Length - Mast down (Std. mast) 16.81 m 55 ft. 2 in.
Length - Mast down (Ext. mast) 20.82 m 68 ft. 4 in.
Height - Mast down 7.36 m 24 ft. 2 in.
Height - Mast up (Std. mast) 16.61 m 54 ft. 6 in.
Height - Mast up (Ext. mast) 20.62 m 67 ft. 8 in.
Width w/ additional deck 5.74 m 18 ft. 10 in.
Width w/o additional deck 5.00 m 16 ft. 5 in.
Operating weight range 63.5 - 70.3 t 140,000 - 155,000 lbs
Dimensions are per engineering drawings, actuals may vary slightly. Weights are approximate and subject to change without notice. All performance figures are theoretical and at 100% systems efficiency.
5SANDVIK DR410i
24 f
t. 2
in. /
7.3
6 m
13 f
t. 2
in. /
4.0
0 m
Ext. Mast: 68 ft. 4 in. / 20.82 mStd. Mast: 55 ft. 2 in. / 16.81 m
Ext
. Mas
t: 6
7 f
t. 8
in. /
20
.62
mS
td. M
ast:
54
ft.
6 in
. / 1
6.6
1 m
12 ft. 8 in. / 3.86 m
2 ft. 5.5 in.” / 0.75 m
36
ft.
11 in
. / 1
1.2
5 m
15 ft. 4 in. / 4.674 m
16 ft. 5 in. / 5.00 mw/o additional deck
18 ft. 10 in. / 5.74 mw/additional deck
TS
2-4
67
:01/
EN
G/M
ET
RIC
© S
and
vik
Min
ing
20
20
SA
ND
VIK
is a
re
gis
tere
d t
rad
em
ark
ow
ne
d b
y S
and
vik
Inte
llec
tual
Pro
pe
rty
AB
in S
we
de
n an
d o
the
r co
un
trie
s.
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
ROCKTECHNOLOGY.SANDVIK