sales aids & promotional items · 2004. 10. 17. · plasma cutting the essential accessory for...
TRANSCRIPT
<0>
SALES AIDS & PROMOTIONAL ITEMSJOBBER DISPLAY ITEMS
MODEL DESCRIPTION
M-45-KIT Clean Air Filter Kit 1/4 NPT Counter DisplayM-100-KIT Clean Air Filter Kit 1/2 NPT Counter DisplayDP-2000 Point-of-Use Filter/Regulator Display w/ ProductDP-3000 Optima Spray Equipment Display BoardDP-4500 Air Management Display Board w/ ProductD-12-2 Disposable Spray Gun Filter Counter DisplayRR-1 Run Razor Counter DisplayRB-3 Run Blocker Counter Display
A variety of point-of-sale display packages present Motor Guard products to your customers with color and impact.
PRODUCT DISPLAYS
APPAREL
AIR SYSTEM COUNTERMAT Model PR-100 20’’ x 16’’Durable, high-impact mat promotes the sale of air management products by displaying all components needed to build a top quality shop air system.
WINDOW DECALModel PR-110 7’’ x 3’’Dual-sided decal promotes the availability ofMotor Guard products in your store.
HOT-SHOT T-SHIRTModel PR-120 L, XL, XXL100% Cotton T-shirts offer a cooland comfortableway to promoteMotor Guard products. Small logo on front andbold Hot-Shotgraphics on back.
OPTIMA PAINT SUITModel PR-122
L, XL, XXL100% Nylon hooded paintsuits are extremely light-weight and washable. Keeppainters clean and preventcontamination in the booth.
REV 10-04 S1135
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
2 11
N THE ULTIMATE DEFENSE FROM DAMAGING DIRTY AIRN A SUB-MICRONIC COMPRESSED AIR FINAL FILTER
FOR ALL CRITICAL APPLICATIONS
REFINISHINGThe perfect final filter. Eliminates paint failures caused by particulate, moisture, and oil aerosol contaminates as small as .01 microns.
AIR TOOLSThe air tool savior. Extends the life of your tools by protecting bearings andprecision parts from dirty, oily, watery contaminants.
PLASMA CUTTINGThe essential accessory for plasma cutters. Increases the efficiency and tiplife of your plasma cutter by removing moisture and oil aerosols from yourcompressed air line.
The filters are available individually (M-30 or M-60), or in kits:M-45 contains an M-30 with two spare M-723 elements, M-100 contains an M-60 with two spare M-723 elements. Users of these filters report contaminant free air with higher flow rates and minimal pressure drops.
SPECIFICATIONS
SPRAY GUNSClean dry oil-free air at your spray gun. Designed to remove the smallest contaminant particle, oil aerosol or drop of moisture.
D-12 HVLP Approved 30 CFM with lowest pressure drop. Traps particles as small as .01 microns. Ends painting failure caused by dirty, oily, watery airDD-1008 Only Spray Gun Filter with color change indicator. Filters moisture,oil, particulate and vapor, four stages. Desiccant beads absorb water vaporfor a -40F dew point.
AIR TOOLSExtends the life of your air tools by protecting bearings and precision partsfrom dirty, oily, watery contaminants.
AS-4028 Rugged filter, tough enough to mount directly on the tool. Protects all precision parts from damaging dirty air. Element unscrews for cleaning and replacement.
SPECIFICATIONS
COMPRESSED AIR FILTERS
Model Pipe Max. Flow Maximum Removal ReplacementNo. Size @80 PSI Pressure Rating (NOM.) Size Element No.
M-30 1/4” NPT 45 CFM 125 PSI .01 Microns 5” x 7” M-723
M-60 1/2” NPT 100 CFM 125 PSI .01 Microns 5” x 7” M-723
Model Pipe Max. Flow Maximum Removal ReplacementNo. Application Size @80 PSI Pressure Rating (NOM.) Size Element No.
D-12 Spray Gun 1/4” NPS/NPT 30 CFM 100 PSI .01 Microns 2 1/2” x 2 1/2” N/A
DD-1008 Spray Gun 1/4” NPS/NPT 20 CFM 100 PSI 5 Microns 3 1/2” x 1 1/2” N/A
AS-4028 Air Tool 1/4” NPS/NPT 25 CFM 100 PSI 40 Microns 2 1/4” x 3/4” EL4058
M-30/M-60
M-45/M-100
M-723
D-12-2
SU
BM
ICR
ON
ICD
ISPO
SA
BLE
SHOP-POWER PRESSURE WASHERSINDUSTRIAL STRENGTH HOT and COLD WASHERS
From the compact and durableportable model to the high-pressure,high-output hot water models, all of these washers provide provenperformance and reliability. All components are of the highest quality, ensuring years of trouble free professional cleaning.
CSA/USUL/CULApprovals
Belt
One-Year Limited Parts and Labor
CSA/US
34 x 29 x 33
393
Operating Pressure(PSI)
Discharge Capacity(GPM)
Pump Drive Motor
Horsepower
Power Source
Burner Fuel
Pump
Drive
Triplex Axial-Piston Pump
Professional-Grade Insulated Trigger with Safety Lock-Off
36” Powder Coated Lance with Rubber Grip
Variable Pattern
Hand-Carry
26 x 17 x 23.7
1/4” x 23’ 3/8” x 30’ 3/8” x 25’ 3/8” x 25’ 3/8” x 25’ 3/8” x 25’ 3/8” x 50’ 3/8” x 50’
55 72 102 92 105 167 373
19.5 x 14.5 x 19.5 30 x 21 x 26 30 x 21 x 26 30 x 21 x 26 35 x 22.5 x 26 34 x 29 x 33
Vertical
Semi-Pneumatic
Horizontal
Pneumatic
15˚ - 25˚ - Detergent 15˚ - Detergent
Diesel/Kerosene
230V/1 Ph/20A230V/1 Ph/20AGasolineGasolineGasolineGasolineGasoline120V/1 Ph/15A
1.5
1.75
1250 2100 2200 2400 2700 3000 1500 2000
2.0 2.5 2.3 2.4 3.0 2.0 2.8
6.0 5.5 6.0 6.5 10.0 2.0 4.0
Diesel/Kerosene
Direct
High Pressure Hose
Gun
Wand
Nozzles
Mounting
Tires
DimensionsL x W x H (In.)
TEFCElectric Motor
TEFCElectric Motor
TEFCElectric Motor
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Shipping Weight(Lbs.)
Warranty
COLD WATER
MOTORGUARDCORPORATION
SHOP-POWERPRESSUREWASHERS
HOT WATERMG-1250C MG-2100C MG-2200C MG-2400C MG-2700C MG-3000C MG-1500H MG-2000H
D-12
D-12-1CJ
DD-1008
10 3
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
COMPRESSED AIR FILTERS - S.A.M.S.SHOP AIR MANAGEMENT SYSTEMA Water, Particulate, Oil Filter and Regulator, sized for the shop with compressors up to 30 H.P.Model Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-800 S.A.M.S. 3/4 NPT 120 CFM 250 PSI 150 F .01 Micron
COMPRESSED AIR FILTERS - PREPAIR CONTROL UNITA compact, high flow Regulator/Filter for point of use air control.Model Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
AC-4525 Air Controller 1/2 NPT 100 CFM 150 PSI 125 F 40 MicronAC-4535 Air Controller 1/2 NPT 100 CFM 150 PSI 125 F 5 Micron
COMPRESSED AIR FILTERS-COMPONENTSHigh quality components for the ultimate in Clean, Dry, Oil Free shop air.
PARTICULATE/WATERModel Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-30 Sub-Micronic 1/4 NPT 45 CFM 125 PSI 175 F .01 MicronM-60 Sub-Micronic 1/2 NPT 100 CFM 125 PSI 175 F .01 MicronAF-4510 Particulate 1/2 NPT 100 CFM 250 PSI 160 F 40 MicronM-300 Ambush 1/2 NPT 160 CFM 175 PSI 160 F 5 MicronM-810 S.A.M.S. 3/4 NPT 230 CFM 250 PSI 175 F 40 Micron
OIL COALESCINGModel Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-30 Sub-Micronic 1/4 NPT 45 CFM 125 PSI 175 F .01 MicronM-60 Sub-Micronic 1/2 NPT 100 CFM 125 PSI 175 F .01 MicronCO-4515 Oil Removing 1/2 NPT 50 CFM 250 PSI 160 F .01 MicronM-820 S.A.M.S. 3/4 NPT 120 CFM 250 PSI 150 F .01 Micron
COMPRESSED AIR REGULATORSDIAPHRAGMModel Pipe Nominal Maximum Maximum OutletNo. Description Size Air Flow Pressure Temperature Range
RG-4049 Mini Reg 1/4 NPT 25 CFM 250 PSI 120 F 2-125 PSIRF-1 Reg. / Filter 1/4 NPT 25 CFM 125 PSI 120 F 2-125 PSIRG-4520 Regulator 1/2 NPT 100 CFM 300 PSI 120 F 2-125 PSIM-200 Controller 1/2 NPT 215 CFM 300 PSI 120 F 2-125 PSIM-830 S.A.M.S. 3/4 NPT 250 CFM 300 PSI 120 F 2-125 PSI
COMPRESSED AIR TANK DRAINSModel Pipe Drain Cycle Maximum MaximumNo. Size Time Time Pressure Temperature Electrical
RF-2011 1/4 NPT 1-30 Sec. 1-60 Min. 200 PSI 35-165 F 115VAC
M-800
AC-4535
M-300
M-200
RF-2011
RB-3 - Run BlockersA rugged non-compressible alloy set of tools for
sanding only the highest point of body character lines.
A-Series Applicator GunsUnique collection of guns will accommodate
most cartridges available today. Rugged, high-power ratio models designed for professional performance.
REFINISHING ACCESSORIESRR-1 - Run RazorUnique tool for “shaving” away runs, sags and dust particles.Also removes striping tape and plastic repair seams.
E-4000S/E-5000S - Stripe EliminatorRemoves stripes and molding adhesives. Soft, flexible,resilient material allows tool to act like an eraser, stripping away material, absorbing the heat and leaving surface area like new. Two sizes to choose from.
Spot Weld CuttersU.S. high quality high speed for separating body panels fromtough OE welds. JMC001 Cutter with JMC003 pilots andsprings. JMD001 Magna Drill is self starting with JMD007replacement double sided slotted drill bits. Both use JMC002double sided cutters.
MR-3 - Magna RulesMagna Rules are flexible magnetic rulers, allowing
hands-free measuring of any steel surface, flat or curved.Pinstriping, lettering, sign painting, locating, the
applications are endless.
Gun RetainersDurable, versatile, protective retainers, can be used with
most Gravity, Siphon and Pressure Feed spray guns.SS-1 Solitaire: Single Station Low profile
DS-1 Duo: Dual Station wall mountDH-1 Duo Halo: Dual Station with halo.
MH-1This unique, Quality U.S. manufactured product is the answerto every painters dream. A temporary retainer for that disappearing razor blade, a “third hand” while you completethat masking operation. Also holds fasteners, clips, weldingstuds, or any small metal parts, allowing you to focus your attention on the job at hand.
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
4
A full line of Back-up Pad Products for automotive refinishing. Twosizes of molded urethane pads are offered in a variety of hardnessesand facings. These pads feature heavy-duty riveted hubs and areprecision balanced for vibration free, flawless sanding. A soft, foamInterface Pad can be added to the 6” Back-up Pad for fine finishsanding and for full contact on irregular surfaces. Other accessoriesinclude a stiff, reinforced composite Backing Plate for aggressivesanding and grinding. Completing the line is a versatile Buffing PadHolder for both lambswool bonnets and foam polishing pads. A hook facing provides a slip-free hold while allowing for quick change ofpads.
From Pulling to Painting, Motor Guard Corporation has a product for all ofyour autobody repair and refinishing needs.
Exclusive Features:l Full Product Line to Meet All Your Shop Needs l Highest Quality U.S. Manufactured Productsl Precision Controlled Weight and Balance for Vibration Free Operationl Ultra Flat Faces for Flawless Sandingl Innovative Facing Materials Provide Maximum Hold While Allowing for Quick Change of Abrasive Discs
BACK-UP PADS
9
MODEL DESCRIPTION PURPOSE SPECIFICATIONSD
ESIC
CA
NT
SPR
AY B
OO
THSH
OP A
IR C
OM
PO
NEN
TS /
DR
YER
S
M-4095-Q
M-810
M-800
RF-2011
RF-2050
M-4095G
DS-1000
M-820
RF-2055
RF-2056
RF-2057
RF-2058
RF-2011
M-800
M-810
M-820
M-830
M-900
M-1000
DS-1000
M-4095-Q
M-4095G
M-4097
Refrigerated Dryer
Refrigerated Dryer
Refrigerated Dryer
Refrigerated Dryer
Automatic Tank Drain
Shop AirManagement System
Shop Air SystemParticulate Filter
Shop Air SystemOil Coalescing Filter
Shop Air SystemDiaphragm Regulator
Econo-dry DesiccantDryer System
System SupremeDesiccant DryerSystem
Desiccant DryerSystem
ReplacementDesiccant
Removes moisture from compressor discharge bylowering temperature. An efficient and economical way of providing dry airthroughout the shop.
For High Inlet temperature airapplications (160 Degree F),please reference our "Threein One" series:
RF-2049 20CFMRF-2050 30CFMRF-2051 50CFMRF-2052 70CFMRF-2053 100CFM
Specify voltage required.
Electronic control automati-cally drains tanks at specifiedinterval. Extends tanks lifeand lowers operating costs.
A water, particulate, oil filterand regulator sized to handle the whole shop. Forcompressors up to 30 HP.
A water trap and particulatefilter designed to handle thewhole shop. Sight glass andautomatic drain.
A high-efficiency oil removingfilter to handle the wholeshop. Pop-up elementchange indicator.
Set line pressure for thewhole shop. A high-capacitytrue diaphragm regulator withhigh visibility gauge.
Economical 2-stage systemincludes a sub-micronic filterand desiccant dryer.
Supplies clean, ultra-dry, oilfree air to the booth. A par-ticulate filter, oil coalescer,desiccant dryer and regulator.
4-stage system removes particulate, water, oil anddelivers ultra-dry, regulatedair to the booth.
Silica gel desiccant beadswith color change indicator.Beads go from blue to pinkwhen changing is needed.Low dust.
Nominal Airflow: 20 CFMComp. Rating: 5 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 40 CFMComp. Rating: 7.5 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 50 CFMComp. Rating: 15 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 100 CFMComp. Rating: 25 HPInlet Temp.: 100 FVoltage: 220/460V 1Ø/3Ø
Pipe Size: 1/4NPTMax. Pressure: 200 PSITemp. Range: 35-165FVoltage: 115V 1Ø
Pipe Size: 3/4NPTNominal Airflow: 120 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSIMax. Temp.: 150F
Pipe Size: 3/4NPTNominal Airflow: 230 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSIMax. Temp.: 175F
Pipe Size: 3/4NPTNominal Airflow: 120 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSIMax. Temp.: 150F
Pipe Size: 3/4NPTNominal Airflow: 250 CFMOutlet Range: 2-125 PSIMax. Pressure: 250 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120FPipe Size: 1/2NPTNominal Airflow: 20 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120F
1 Quart
1 Gallon
25 Pounds
M-1000
M-830
SANDINGBLOCKS
MB-1Unique sanding solutions for difficult applications. Hard side for PSA paper,extreme curving power for fender crownsand motorcycle tanks. Soft “Memory” sidereduces pressure for nibs, louvers andother challenging surfaces.
BBS-1 Scuff Pad,Soft Backer BlockSoft and flexible for scuffing areas notaccessible to rigid blocks. Flexible, yet still evenly distributes pressure, impartingan even “tooth” over the entire panel with a single pass.
WB-1 Wonder BlockSupreme Sanding BlockRugged, ergonomically designed for maximum gripping power over flat to slightly curved surfaces. Designed for all types of paper but ideal for PSA, with the sanding surface conforming to thepanel shape.
HT-1Block sands areas whereordinary hard blocks are notadequate. “Hole” side cuts30% faster, back side for lessaggressive applications.
SB-1This unique sanding block utilizes two different densitiesto achieve the ultimate inblock sanding of curved orirregular shaped surfaces.
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
8 5
MODEL DESCRIPTION PURPOSE SPECIFICATIONS
TOO
L M
OU
NT
CO
MPO
NEN
TSPO
INT-
OF-U
SE C
OM
PO
NEN
TS
RG-4049
D-12
DD-1008
AC-4525
RG-4520
M-400
AF-4510
M-60M-30
M-60
LU-4505
AF-4510
CO-4515
M-400
AD-1000
RG-4520
AC-4525
AC-4535
D-12
DD-1008
AS-4028
RG-4049
Sub-Micronic CompressedAir Filter
Sub-Micronic CompressedAir Filter
Lubricator
Water and Particulate Filter
Oil Coalescing Filter
Desiccant Dryer
AutomaticWater Drain
Diaphragm Regulatorwith Gauge
Air Control Unit
Air Control Unit
Disposable SprayGun Filter
Mini Desiccant Dryer
Air Tool Filter
Mini Regulator/Gauge
The ultimate final filter.Removes moisture, particulate and oil aerosols toless than .01 microns in size.Protects refinishing equip-ment, air tools and plasmacutting equipment. Easilyreplaceable element.
Injects a fine stream of oilinto air supply to lubricate air tools.
General-purpose filterremoves moisture, particulate and oil aerosols.Sight glass and manual drain included.
Removes oil aerosols fromcompressed air stream to .01 microns in size.
Delivers extremely dry air,dew point to -40F, to criticalprocesses. 2 Qt. Desiccantcharge is easily replaced.
Installs at the bottom of airline drops to collect and draincondensed moisture.
A true diaphragm, relievingtype regulator for precisecontrol of air pressure nearthe workstation.
Integral design combines anefficient water and particulatefilter with a high-flowdiaphragm regulator into acompact unit. Pressuregauge is included.
Attaches directly to the spraygun and provides a lightweightsub-micronic filter to removeoil, water and particulate.
Lightweight disposable desiccant dryer attaches directly to tool. Color changeindicator signals replacement.
Protects valuable high-speedair tools by removing particulates right at the inlet.Extremely light-weight.
A true diaphragm, precisionregulator that weighs ounces.Attaches directly to tool orspray gun for ultimate control.
Pipe Size: 1/4NPTNominal Airflow: 45 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 175F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 175F
Pipe Size: 1/2NPTNominal Airflow: 142 CFMBowl Size: 5 oz.Max. Pressure: 250 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSITemp. Range: 40-160F
Pipe Size: 1/2NPTNominal Airflow: 50 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSITemp. Range: 40-160F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSIMax. Temp.: 120F
Pipe Size: 1/2NPTBowl Size: 6 oz.Max. Pressure: 250 PSIMax. Temp.: 160F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMOutlet Range: 0-125 PSIMax. Pressure: 300 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 40 MicronMax. Pressure: 150 PSITemp. Range: 40-125F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 5 MicronMax. Pressure: 150 PSITemp. Range: 40-125F
Pipe Size: 1/4NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 100 PSIMax. Temp.: 120F
Pipe Size: 1/4NPTNominal Airflow: 20 CFMFiltration Rating: 5 MicronMax. Pressure: 125 PSIMax. Temp.: 130F
Pipe Size: 1/4NPTNominal Airflow: 25 CFMFiltration Rating: 40 MicronMax. Pressure: 100 PSIMax. Temp.: 200F
Pipe Size: 1/4NPTNominal Airflow: 25 CFMOutlet Range: 0-125 PSIMax. Pressure: 250 PSITemp. Range: 40-120F
STUD GUN ACCESSORIESThe Magna Clamp
Constructed from heat-treated hardenedsteel, this tool featureswing nut/self-tightening,making the job fast and easy.J20016
Slide Hammer
Slide made of castiron. Collet is heat-treated tool steel formaximum grip andextended life.J20003 Heavy dutywith quick releaseJ10003 Standard cam release
“T” Puller
A compact tool for small damage repairon light-weight metalto reduce overpull.J20017
Magna Claw
Heavy duty steel construction, utilizinghandle or externalpulling source. Uniquedesign pulls theMagna wire, one "finger" at a time, until the damagedmetal is flush with
surface. Excellent method for pulling out long,difficult to access creases.J20036 Magna Wire Claw, heavy duty, 8 fingerJ20037 Magna Wire Claw with handle, 5 fingerJ20038 Magna Wire Claw Kit, includes 5 and 8 finger claws, Electrode Kit and Magna Wire.
Magna WireElectrode KitFor welding Magna Wire
J20024
Draw PinsCopper-coated steel,soft for easy flexingand grinding, but delivers a 500 lb. pull.J20014 2.0 mm Draw PinsJ20015 2.5 mm Draw Pins
Trim RivetsSteel, copper coatedrivets. Welded to bodypanels for installingmetal trim strips.A restoration requirement.J20012
Magna WireSteel, copper coatedcorrugated wire.Welded with theMagna Wire electrode,to pull out long creasesevenly with the Magna Claw.J20024 16 ga., 1/2 lb pkJ20025 12 ga., 1 lb pk
Electrodes
Tough copper with highest electrical conductivity.J20007 Pin electrode, holds all standard size pins.J20009 Rivet electrode, for J20012 trim rivets.J20006 Shrinking electrode, for fast heat.
6 7
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
MAGNA-SPOT STUD WELDER KITSEntry KitJO1000
Professional KitJO1500
Pro-Plus KitJO1525
Deluxe KitJO1550
Top-Pro J02500
Custom Stud Welder Kits with a choice.From the economical Entry Kit to our Super Pro-Plus, all Motor Guard Stud Welders offer World Class performance for today’s collision repair professional.
Super-Pro KitJO2000
Super Pro-Plus Kit
JO2250
6 7
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
MAGNA-SPOT STUD WELDER KITSEntry KitJO1000
Professional KitJO1500
Pro-Plus KitJO1525
Deluxe KitJO1550
Top-Pro J02500
Custom Stud Welder Kits with a choice.From the economical Entry Kit to our Super Pro-Plus, all Motor Guard Stud Welders offer World Class performance for today’s collision repair professional.
Super-Pro KitJO2000
Super Pro-Plus Kit
JO2250
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
8 5
MODEL DESCRIPTION PURPOSE SPECIFICATIONS
TOO
L M
OU
NT
CO
MPO
NEN
TSPO
INT-
OF-U
SE C
OM
PO
NEN
TSRG-4049
D-12
DD-1008
AC-4525
RG-4520
M-400
AF-4510
M-60M-30
M-60
LU-4505
AF-4510
CO-4515
M-400
AD-1000
RG-4520
AC-4525
AC-4535
D-12
DD-1008
AS-4028
RG-4049
Sub-Micronic CompressedAir Filter
Sub-Micronic CompressedAir Filter
Lubricator
Water and Particulate Filter
Oil Coalescing Filter
Desiccant Dryer
AutomaticWater Drain
Diaphragm Regulatorwith Gauge
Air Control Unit
Air Control Unit
Disposable SprayGun Filter
Mini Desiccant Dryer
Air Tool Filter
Mini Regulator/Gauge
The ultimate final filter.Removes moisture, particulate and oil aerosols toless than .01 microns in size.Protects refinishing equip-ment, air tools and plasmacutting equipment. Easilyreplaceable element.
Injects a fine stream of oilinto air supply to lubricate air tools.
General-purpose filterremoves moisture, particulate and oil aerosols.Sight glass and manual drain included.
Removes oil aerosols fromcompressed air stream to .01 microns in size.
Delivers extremely dry air,dew point to -40F, to criticalprocesses. 2 Qt. Desiccantcharge is easily replaced.
Installs at the bottom of airline drops to collect and draincondensed moisture.
A true diaphragm, relievingtype regulator for precisecontrol of air pressure nearthe workstation.
Integral design combines anefficient water and particulatefilter with a high-flowdiaphragm regulator into acompact unit. Pressuregauge is included.
Attaches directly to the spraygun and provides a lightweightsub-micronic filter to removeoil, water and particulate.
Lightweight disposable desiccant dryer attaches directly to tool. Color changeindicator signals replacement.
Protects valuable high-speedair tools by removing particulates right at the inlet.Extremely light-weight.
A true diaphragm, precisionregulator that weighs ounces.Attaches directly to tool orspray gun for ultimate control.
Pipe Size: 1/4NPTNominal Airflow: 45 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 175F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 175F
Pipe Size: 1/2NPTNominal Airflow: 142 CFMBowl Size: 5 oz.Max. Pressure: 250 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSITemp. Range: 40-160F
Pipe Size: 1/2NPTNominal Airflow: 50 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSITemp. Range: 40-160F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSIMax. Temp.: 120F
Pipe Size: 1/2NPTBowl Size: 6 oz.Max. Pressure: 250 PSIMax. Temp.: 160F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMOutlet Range: 0-125 PSIMax. Pressure: 300 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 40 MicronMax. Pressure: 150 PSITemp. Range: 40-125F
Pipe Size: 1/2NPTNominal Airflow: 100 CFMFiltration Rating: 5 MicronMax. Pressure: 150 PSITemp. Range: 40-125F
Pipe Size: 1/4NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 100 PSIMax. Temp.: 120F
Pipe Size: 1/4NPTNominal Airflow: 20 CFMFiltration Rating: 5 MicronMax. Pressure: 125 PSIMax. Temp.: 130F
Pipe Size: 1/4NPTNominal Airflow: 25 CFMFiltration Rating: 40 MicronMax. Pressure: 100 PSIMax. Temp.: 200F
Pipe Size: 1/4NPTNominal Airflow: 25 CFMOutlet Range: 0-125 PSIMax. Pressure: 250 PSITemp. Range: 40-120F
STUD GUN ACCESSORIESThe Magna Clamp
Constructed from heat-treated hardenedsteel, this tool featureswing nut/self-tightening,making the job fast and easy.J20016
Slide Hammer
Slide made of castiron. Collet is heat-treated tool steel formaximum grip andextended life.J20003 Heavy dutywith quick releaseJ10003 Standard cam release
“T” Puller
A compact tool for small damage repairon light-weight metalto reduce overpull.J20017
Magna Claw
Heavy duty steel construction, utilizinghandle or externalpulling source. Uniquedesign pulls theMagna wire, one "finger" at a time, until the damagedmetal is flush with
surface. Excellent method for pulling out long,difficult to access creases.J20036 Magna Wire Claw, heavy duty, 8 fingerJ20037 Magna Wire Claw with handle, 5 fingerJ20038 Magna Wire Claw Kit, includes 5 and 8 finger claws, Electrode Kit and Magna Wire.
Magna WireElectrode KitFor welding Magna Wire
J20024
Draw PinsCopper-coated steel,soft for easy flexingand grinding, but delivers a 500 lb. pull.J20014 2.0 mm Draw PinsJ20015 2.5 mm Draw Pins
Trim RivetsSteel, copper coatedrivets. Welded to bodypanels for installingmetal trim strips.A restoration requirement.J20012
Magna WireSteel, copper coatedcorrugated wire.Welded with theMagna Wire electrode,to pull out long creasesevenly with the Magna Claw.J20024 16 ga., 1/2 lb pkJ20025 12 ga., 1 lb pk
Electrodes
Tough copper with highest electrical conductivity.J20007 Pin electrode, holds all standard size pins.J20009 Rivet electrode, for J20012 trim rivets.J20006 Shrinking electrode, for fast heat.
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
4
A full line of Back-up Pad Products for automotive refinishing. Twosizes of molded urethane pads are offered in a variety of hardnessesand facings. These pads feature heavy-duty riveted hubs and areprecision balanced for vibration free, flawless sanding. A soft, foamInterface Pad can be added to the 6” Back-up Pad for fine finishsanding and for full contact on irregular surfaces. Other accessoriesinclude a stiff, reinforced composite Backing Plate for aggressivesanding and grinding. Completing the line is a versatile Buffing PadHolder for both lambswool bonnets and foam polishing pads. A hook facing provides a slip-free hold while allowing for quick change ofpads.
From Pulling to Painting, Motor Guard Corporation has a product for all ofyour autobody repair and refinishing needs.
Exclusive Features:l Full Product Line to Meet All Your Shop Needs l Highest Quality U.S. Manufactured Productsl Precision Controlled Weight and Balance for Vibration Free Operationl Ultra Flat Faces for Flawless Sandingl Innovative Facing Materials Provide Maximum Hold While Allowing for Quick Change of Abrasive Discs
BACK-UP PADS
9
MODEL DESCRIPTION PURPOSE SPECIFICATIONS
DESIC
CA
NT
SPR
AY B
OO
THSH
OP A
IR C
OM
PO
NEN
TS /
DR
YER
S
M-4095-Q
M-810
M-800
RF-2011
RF-2050
M-4095G
DS-1000
M-820
RF-2055
RF-2056
RF-2057
RF-2058
RF-2011
M-800
M-810
M-820
M-830
M-900
M-1000
DS-1000
M-4095-Q
M-4095G
M-4097
Refrigerated Dryer
Refrigerated Dryer
Refrigerated Dryer
Refrigerated Dryer
Automatic Tank Drain
Shop AirManagement System
Shop Air SystemParticulate Filter
Shop Air SystemOil Coalescing Filter
Shop Air SystemDiaphragm Regulator
Econo-dry DesiccantDryer System
System SupremeDesiccant DryerSystem
Desiccant DryerSystem
ReplacementDesiccant
Removes moisture from compressor discharge bylowering temperature. An efficient and economical way of providing dry airthroughout the shop.
For High Inlet temperature airapplications (160 Degree F),please reference our "Threein One" series:
RF-2049 20CFMRF-2050 30CFMRF-2051 50CFMRF-2052 70CFMRF-2053 100CFM
Specify voltage required.
Electronic control automati-cally drains tanks at specifiedinterval. Extends tanks lifeand lowers operating costs.
A water, particulate, oil filterand regulator sized to handle the whole shop. Forcompressors up to 30 HP.
A water trap and particulatefilter designed to handle thewhole shop. Sight glass andautomatic drain.
A high-efficiency oil removingfilter to handle the wholeshop. Pop-up elementchange indicator.
Set line pressure for thewhole shop. A high-capacitytrue diaphragm regulator withhigh visibility gauge.
Economical 2-stage systemincludes a sub-micronic filterand desiccant dryer.
Supplies clean, ultra-dry, oilfree air to the booth. A par-ticulate filter, oil coalescer,desiccant dryer and regulator.
4-stage system removes particulate, water, oil anddelivers ultra-dry, regulatedair to the booth.
Silica gel desiccant beadswith color change indicator.Beads go from blue to pinkwhen changing is needed.Low dust.
Nominal Airflow: 20 CFMComp. Rating: 5 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 40 CFMComp. Rating: 7.5 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 50 CFMComp. Rating: 15 HPInlet Temp.: 100FVoltage: 115/220V 1Ø
Nominal Airflow: 100 CFMComp. Rating: 25 HPInlet Temp.: 100 FVoltage: 220/460V 1Ø/3Ø
Pipe Size: 1/4NPTMax. Pressure: 200 PSITemp. Range: 35-165FVoltage: 115V 1Ø
Pipe Size: 3/4NPTNominal Airflow: 120 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSIMax. Temp.: 150F
Pipe Size: 3/4NPTNominal Airflow: 230 CFMFiltration Rating: 40 MicronMax. Pressure: 250 PSIMax. Temp.: 175F
Pipe Size: 3/4NPTNominal Airflow: 120 CFMFiltration Rating: .01 MicronMax. Pressure: 250 PSIMax. Temp.: 150F
Pipe Size: 3/4NPTNominal Airflow: 250 CFMOutlet Range: 2-125 PSIMax. Pressure: 250 PSITemp. Range: 40-120F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120F
Pipe Size: 1/2NPTNominal Airflow: 30 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120FPipe Size: 1/2NPTNominal Airflow: 20 CFMFiltration Rating: .01 MicronMax. Pressure: 125 PSIMax. Temp.: 120F
1 Quart
1 Gallon
25 Pounds
M-1000
M-830
SANDINGBLOCKS
MB-1Unique sanding solutions for difficult applications. Hard side for PSA paper,extreme curving power for fender crownsand motorcycle tanks. Soft “Memory” sidereduces pressure for nibs, louvers andother challenging surfaces.
BBS-1 Scuff Pad,Soft Backer BlockSoft and flexible for scuffing areas notaccessible to rigid blocks. Flexible, yet still evenly distributes pressure, impartingan even “tooth” over the entire panel with a single pass.
WB-1 Wonder BlockSupreme Sanding BlockRugged, ergonomically designed for maximum gripping power over flat to slightly curved surfaces. Designed for all types of paper but ideal for PSA, with the sanding surface conforming to thepanel shape.
HT-1Block sands areas whereordinary hard blocks are notadequate. “Hole” side cuts30% faster, back side for lessaggressive applications.
SB-1This unique sanding block utilizes two different densitiesto achieve the ultimate inblock sanding of curved orirregular shaped surfaces.
10 3
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
COMPRESSED AIR FILTERS - S.A.M.S.SHOP AIR MANAGEMENT SYSTEMA Water, Particulate, Oil Filter and Regulator, sized for the shop with compressors up to 30 H.P.Model Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-800 S.A.M.S. 3/4 NPT 120 CFM 250 PSI 150 F .01 Micron
COMPRESSED AIR FILTERS - PREPAIR CONTROL UNITA compact, high flow Regulator/Filter for point of use air control.Model Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
AC-4525 Air Controller 1/2 NPT 100 CFM 150 PSI 125 F 40 MicronAC-4535 Air Controller 1/2 NPT 100 CFM 150 PSI 125 F 5 Micron
COMPRESSED AIR FILTERS-COMPONENTSHigh quality components for the ultimate in Clean, Dry, Oil Free shop air.
PARTICULATE/WATERModel Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-30 Sub-Micronic 1/4 NPT 45 CFM 125 PSI 175 F .01 MicronM-60 Sub-Micronic 1/2 NPT 100 CFM 125 PSI 175 F .01 MicronAF-4510 Particulate 1/2 NPT 100 CFM 250 PSI 160 F 40 MicronM-300 Ambush 1/2 NPT 160 CFM 175 PSI 160 F 5 MicronM-810 S.A.M.S. 3/4 NPT 230 CFM 250 PSI 175 F 40 Micron
OIL COALESCINGModel Pipe Nominal Maximum Maximum FiltrationNo. Description Size Air Flow Pressure Temperature Rating
M-30 Sub-Micronic 1/4 NPT 45 CFM 125 PSI 175 F .01 MicronM-60 Sub-Micronic 1/2 NPT 100 CFM 125 PSI 175 F .01 MicronCO-4515 Oil Removing 1/2 NPT 50 CFM 250 PSI 160 F .01 MicronM-820 S.A.M.S. 3/4 NPT 120 CFM 250 PSI 150 F .01 Micron
COMPRESSED AIR REGULATORSDIAPHRAGMModel Pipe Nominal Maximum Maximum OutletNo. Description Size Air Flow Pressure Temperature Range
RG-4049 Mini Reg 1/4 NPT 25 CFM 250 PSI 120 F 2-125 PSIRF-1 Reg. / Filter 1/4 NPT 25 CFM 125 PSI 120 F 2-125 PSIRG-4520 Regulator 1/2 NPT 100 CFM 300 PSI 120 F 2-125 PSIM-200 Controller 1/2 NPT 215 CFM 300 PSI 120 F 2-125 PSIM-830 S.A.M.S. 3/4 NPT 250 CFM 300 PSI 120 F 2-125 PSI
COMPRESSED AIR TANK DRAINSModel Pipe Drain Cycle Maximum MaximumNo. Size Time Time Pressure Temperature Electrical
RF-2011 1/4 NPT 1-30 Sec. 1-60 Min. 200 PSI 35-165 F 115VAC
M-800
AC-4535
M-300
M-200
RF-2011
RB-3 - Run BlockersA rugged non-compressible alloy set of tools for
sanding only the highest point of body character lines.
A-Series Applicator GunsUnique collection of guns will accommodate
most cartridges available today. Rugged, high-power ratio models designed for professional performance.
REFINISHING ACCESSORIESRR-1 - Run RazorUnique tool for “shaving” away runs, sags and dust particles.Also removes striping tape and plastic repair seams.
E-4000S/E-5000S - Stripe EliminatorRemoves stripes and molding adhesives. Soft, flexible,resilient material allows tool to act like an eraser, stripping away material, absorbing the heat and leaving surface area like new. Two sizes to choose from.
Spot Weld CuttersU.S. high quality high speed for separating body panels fromtough OE welds. JMC001 Cutter with JMC003 pilots andsprings. JMD001 Magna Drill is self starting with JMD007replacement double sided slotted drill bits. Both use JMC002double sided cutters.
MR-3 - Magna RulesMagna Rules are flexible magnetic rulers, allowing
hands-free measuring of any steel surface, flat or curved.Pinstriping, lettering, sign painting, locating, the
applications are endless.
Gun RetainersDurable, versatile, protective retainers, can be used with
most Gravity, Siphon and Pressure Feed spray guns.SS-1 Solitaire: Single Station Low profile
DS-1 Duo: Dual Station wall mountDH-1 Duo Halo: Dual Station with halo.
MH-1This unique, Quality U.S. manufactured product is the answerto every painters dream. A temporary retainer for that disappearing razor blade, a “third hand” while you completethat masking operation. Also holds fasteners, clips, weldingstuds, or any small metal parts, allowing you to focus your attention on the job at hand.
MOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARDMOTOR GUARD MOTOR GUARD MOTORGUARD MOTOR GUARD MOTOR GUARD
2 11
N THE ULTIMATE DEFENSE FROM DAMAGING DIRTY AIRN A SUB-MICRONIC COMPRESSED AIR FINAL FILTER
FOR ALL CRITICAL APPLICATIONS
REFINISHINGThe perfect final filter. Eliminates paint failures caused by particulate, moisture, and oil aerosol contaminates as small as .01 microns.
AIR TOOLSThe air tool savior. Extends the life of your tools by protecting bearings andprecision parts from dirty, oily, watery contaminants.
PLASMA CUTTINGThe essential accessory for plasma cutters. Increases the efficiency and tiplife of your plasma cutter by removing moisture and oil aerosols from yourcompressed air line.
The filters are available individually (M-30 or M-60), or in kits:M-45 contains an M-30 with two spare M-723 elements, M-100 contains an M-60 with two spare M-723 elements. Users of these filters report contaminant free air with higher flow rates and minimal pressure drops.
SPECIFICATIONS
SPRAY GUNSClean dry oil-free air at your spray gun. Designed to remove the smallest contaminant particle, oil aerosol or drop of moisture.
D-12 HVLP Approved 30 CFM with lowest pressure drop. Traps particles as small as .01 microns. Ends painting failure caused by dirty, oily, watery airDD-1008 Only Spray Gun Filter with color change indicator. Filters moisture,oil, particulate and vapor, four stages. Desiccant beads absorb water vaporfor a -40F dew point.
AIR TOOLSExtends the life of your air tools by protecting bearings and precision partsfrom dirty, oily, watery contaminants.
AS-4028 Rugged filter, tough enough to mount directly on the tool. Protects all precision parts from damaging dirty air. Element unscrews for cleaning and replacement.
SPECIFICATIONS
COMPRESSED AIR FILTERS
Model Pipe Max. Flow Maximum Removal ReplacementNo. Size @80 PSI Pressure Rating (NOM.) Size Element No.
M-30 1/4” NPT 45 CFM 125 PSI .01 Microns 5” x 7” M-723
M-60 1/2” NPT 100 CFM 125 PSI .01 Microns 5” x 7” M-723
Model Pipe Max. Flow Maximum Removal ReplacementNo. Application Size @80 PSI Pressure Rating (NOM.) Size Element No.
D-12 Spray Gun 1/4” NPS/NPT 30 CFM 100 PSI .01 Microns 2 1/2” x 2 1/2” N/A
DD-1008 Spray Gun 1/4” NPS/NPT 20 CFM 100 PSI 5 Microns 3 1/2” x 1 1/2” N/A
AS-4028 Air Tool 1/4” NPS/NPT 25 CFM 100 PSI 40 Microns 2 1/4” x 3/4” EL4058
M-30/M-60
M-45/M-100
M-723
D-12-2
SU
BM
ICR
ON
ICD
ISPO
SA
BLE
SHOP-POWER PRESSURE WASHERSINDUSTRIAL STRENGTH HOT and COLD WASHERS
From the compact and durableportable model to the high-pressure,high-output hot water models, all of these washers provide provenperformance and reliability. All components are of the highest quality, ensuring years of trouble free professional cleaning.
CSA/USUL/CULApprovals
Belt
One-Year Limited Parts and Labor
CSA/US
34 x 29 x 33
393
Operating Pressure(PSI)
Discharge Capacity(GPM)
Pump Drive Motor
Horsepower
Power Source
Burner Fuel
Pump
Drive
Triplex Axial-Piston Pump
Professional-Grade Insulated Trigger with Safety Lock-Off
36” Powder Coated Lance with Rubber Grip
Variable Pattern
Hand-Carry
26 x 17 x 23.7
1/4” x 23’ 3/8” x 30’ 3/8” x 25’ 3/8” x 25’ 3/8” x 25’ 3/8” x 25’ 3/8” x 50’ 3/8” x 50’
55 72 102 92 105 167 373
19.5 x 14.5 x 19.5 30 x 21 x 26 30 x 21 x 26 30 x 21 x 26 35 x 22.5 x 26 34 x 29 x 33
Vertical
Semi-Pneumatic
Horizontal
Pneumatic
15˚ - 25˚ - Detergent 15˚ - Detergent
Diesel/Kerosene
230V/1 Ph/20A230V/1 Ph/20AGasolineGasolineGasolineGasolineGasoline120V/1 Ph/15A
1.5
1.75
1250 2100 2200 2400 2700 3000 1500 2000
2.0 2.5 2.3 2.4 3.0 2.0 2.8
6.0 5.5 6.0 6.5 10.0 2.0 4.0
Diesel/Kerosene
Direct
High Pressure Hose
Gun
Wand
Nozzles
Mounting
Tires
DimensionsL x W x H (In.)
TEFCElectric Motor
TEFCElectric Motor
TEFCElectric Motor
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Briggs & StrattonOHV Engine
Shipping Weight(Lbs.)
Warranty
COLD WATER
MOTORGUARDCORPORATION
SHOP-POWERPRESSUREWASHERS
HOT WATERMG-1250C MG-2100C MG-2200C MG-2400C MG-2700C MG-3000C MG-1500H MG-2000H
D-12
D-12-1CJ
DD-1008
<0>
SALES AIDS & PROMOTIONAL ITEMSJOBBER DISPLAY ITEMS
MODEL DESCRIPTION
M-45-KIT Clean Air Filter Kit 1/4 NPT Counter DisplayM-100-KIT Clean Air Filter Kit 1/2 NPT Counter DisplayDP-2000 Point-of-Use Filter/Regulator Display w/ ProductDP-3000 Optima Spray Equipment Display BoardDP-4500 Air Management Display Board w/ ProductD-12-2 Disposable Spray Gun Filter Counter DisplayRR-1 Run Razor Counter DisplayRB-3 Run Blocker Counter Display
A variety of point-of-sale display packages present Motor Guard products to your customers with color and impact.
PRODUCT DISPLAYS
APPAREL
AIR SYSTEM COUNTERMAT Model PR-100 20’’ x 16’’Durable, high-impact mat promotes the sale of air management products by displaying all components needed to build a top quality shop air system.
WINDOW DECALModel PR-110 7’’ x 3’’Dual-sided decal promotes the availability ofMotor Guard products in your store.
HOT-SHOT T-SHIRTModel PR-120 L, XL, XXL100% Cotton T-shirts offer a cooland comfortableway to promoteMotor Guard products. Small logo on front andbold Hot-Shotgraphics on back.
OPTIMA PAINT SUITModel PR-122
L, XL, XXL100% Nylon hooded paintsuits are extremely light-weight and washable. Keeppainters clean and preventcontamination in the booth.
REV 10-04 S1135