sainal t cv oct 15
TRANSCRIPT
CURRICULUM VITAESAINAL TAJANG
Jl. Bangkala 1 no.6 Kel. Bangkala Kec. Manggala
Kodya Makassar 90235.
Mobile Phone : 0811462114
Email : [email protected]
PERSONAL DETAILS
Current Occupation : Mechanical Technician
Marital Status : Single
Place/Date of Birth : Palopo/14th October 1978
Language : Indonesian and English
EDUCATION DEGREE
Mechanical Degree (S1) : Mechanical Departement of Universitas Muslim Indonesia (2010 – 2012)
Diploma (D3) : Mechanical Departement of Polytecnic Makassar (1998 – 2002)
WORK EXPERIENCES
1. PT. Japfa Comfeed Indonesia, TbkPosition :Mechanical Maintenance. April 2005 to November 2007
Responsibilities1. Maintaining all of machines and equipments related to
production process2. Fabricating, repairing and installing machine and equipments
of production proccess.3. Keep all equipments availability during production process in
a safe and efficient manner.
2. PT TIMUR ASRI LESTARI contractor for PT.ALSTOM Power Energy Systems IndonesiaPosition :Mechanical Technician for 135 MW (2 Gas Turbine-8C and 1 Steam Turbine-24MP) ALSTOM Combined Cycle Power Plant.November 2007 to April 2009
ResponsibilitiesPerforming all Alstom mechanical technician responsibilities.
3. PT. ENERGY SENGKANGPosition :Mechanical Technician for 65 MW (1 gas Turbine SGT5-1000F) SIEMENS Open Cycle Power Plant.April 2009 to December 2009
Responsibilities1. Operating the Plant according to contractual obligations, local
standartds, Regulation and Prudent Utility Practices2. Throuble shooting and Plant Engineering.3. Outage Maintenance with 3rd party4. Development and implementation of Computer based
Maintenance Management System (CMMS).
5. Initial spareparts request.6. Preparing, implementing and maintaining mechanical
maintenance management prosedures.7. Stores and inventory management using computer based.
4. PT. ALSTOM ENERGY SYSTEM INDONESIA
Position :Mechanical Technician for 135 MW (2 Gas Turbine-8C and 1 Steam Turbine-24MP) ALSTOM Combined Cycle Power Plant.June 2010 until March 2012
Responsibilities1. Performing all preventive/scheduled, scheduled and corrective
Maintenance including troubleshooting on mechanical power plant equipment.
2. Following all Power Station safety procedures and implement Permit To Work system according to Work Instruction Procedure and Safety Manual.
3. Ensuring all work is carried out according to relevant procedures and follow all Power Station safety procedures.
4. Rigging and lifting properly heavy rotors, ducts, casing, etc. with overhead and manual/mobile cranes.
5. Replacing and aligning rotor shaft, repair and replace motor bearing or mechanical seal.
6. Maintenance and repair of all mechanical parts such as HVAC, Motors, generators, Compressor & Dryer, Emergency power systems and portable mechanical tools.
7. Study drawings, technical manuals and other documents to obtain instructions on proper maintenance procedures.
8. Operate workshop equipment using arc weld, gas weld, solder, cutting torch and other standard maintenance tools.
9. Repairing hydraulic and pneumatic components.10. Operate and maintaining forklift, loader and other plant
vehicles.11. Carrying out or leading Condition Monitoring.12. Maintenance and overhauling pumps, plant auxiliaries’
gearbox, valves, etc.
13. Supervising Contractors.14. Co-coordinating with other Departments and Sections to
ensure smooth teamwork within the work scope.15. Ensuring feedback is complete on work carried out and any
problems encountered.16. Participating and reviewing the plant spares and tool ordering
and maintenance.17. Making suggestions for improvements to plant or procedures.18. Working on other duties decided by the
Engineering/Maintenance Manager.19. Carrying out their duties during the normal daily working time.
Scheduled and unscheduled overtime and rotating shift work may be required.
20. The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities.
21. To take part in training both on and off site, to be trained and to train others as required.
22. Reporting any accident that occur during Maintenance work.
QHSE Deputy
Responsibilities :
1. Developing the Health and Safety Management System.2. Liaison with all external bodies in matters of safety, statutory
and mandatory licenses.3. Assess training needs for all power station personnel in regards
to safety on site and coordinate training needs with Quality and Training Engineer.
4. To act as member of the P2K3.5. Establish an accident reporting and investigation system.6. Carry out regular safety audits.7. Ensure all contractors working on site are fully trained and
conversant with Power Station Health and Safety policy.8. Assist in the implementation of the safety rule system.9. Ensuring all Power Station personnel and contractors are fully
trained and fully equipped to be able to work in a safe manner.10. To establish a blame free culture within the Power Station.
11. Investigate and report any accidents or near misses.12. Managing First Aid facilities.13. To take part in training both on and off site, to be trained and to
train others as required.
5. PT. CONSOLIDATED ELECTRIC POWER ASIA
Position :
Mechanical technician :
14 march 2012 – July 2014
Mechanical Technician is responsible for performing all preventive, schedule and unschedule maintenace power plant equipment in safe and efficient manner.
Responsible for implementing Operational H&S procedures on a day to day basis, with a particular emphasis on Permits to Work
The post holder acts within a small team of Power Station personnel as a responsible to leading execution or excecuting includes machanical repair of equipment and machinary used to produce and maintain the building environment. In the preoperational phase the post holder will participate in the construction and commissioning of the plant.
Mechanical Engineer :
July 2014 – present
To work within the Mechanical maintenance team directly involved in maintaining the Mechanical equipment of the Power Station in a safe and efficient manner.
Responsible to Maintenance Manager for implementing Maintenance and Engineering Healt and Safety Procedures on a day to day basis.
Perform duties of the Maintenance Manager in his absence if requested.
APRENTICE
Automotive Devision at NV Hadji Kalla Makassar. Maintenance Department at PT Panca Usaha Palopo Plywood
TRAINING, COURSES AND SEMINARS
In House Training Leadership and Communication Skill by Neville Clark. 16 – 17 October 2014
Technical Report Writing by Value Consult/Archipelago. 8 – 9 October 2014
In House Training HAZOPS (Hazard and Operability Study) by PT Phitagoras Global Duta. 2012
Basic SIEMENS SGT5-1000F Gas Turbine Explanation around fire behaviour concept and fire anatomy at
Energy Equity Epic Sengkang. 2008 Swagelok Safety Tube Fitting Instalation Seminar at
Indokomponen System Fluida. July 2008 Total Productive Maintenance by Training Team PT Japfa
Comfeed Indonesia. March 2007 Retooling Program for Un/Under Employed Graduates At Priority
Disciplines.Course Content :
i. Leadership Life Skill ii. English fo Career and Businessiii. Basic Computer and Internetiv. Managerial Skillv. Application of Technology at PT. SEMEN BOSOWA
Marosvi. Internship Program in PT. SEMEN BOSOWA Marosvii. Basic Enterpreneurshipviii. Orientation and Enrichment of The Participants To
Job Market.Conducted by PPA Consultants and PT. BOSOWA. September until December 2004
OTHER SKILL
Excelent Computer Skill with MS. Office 2007 and Auto Cad 2010 Computerized Maintenance Management System (CMMS) XPMaintenance System
REFFERENCES
Agustinus Matongan (Maintenance Manager PT. Consolidated Electric Power Asia) Mobile Phone : 08114600413
Muhammad Nursyam (Asia Pasific Project Manager of General Electric). Mobile Phone : 0811428505