safetyware catalogs bodyprotection interetsing

Limited Splash Particle Protection

Protect against a wide range of chemicals and harmful

particles.

Spray Tight Liquid Tight

Protect against ultra fine

hazardous dusts, powders,

concentrated inorganic acids and bases, and water based salt

solutions.

Gas Tight Non Gas Tight

It has been tested against 284 challenge

chemicals. It is blue in color and

make it highly visible in both bright and dim

light.

MicroTex

CT3S428E

Level BProtective Coverall

Level AProtective Coverall

Chemical Level Chart

Preshrunk Cotton Coverall Sizing Chart

C5428

Type 5 & 6

Type 3 & 4

Type 1 & 2

www.safetyware.com.my45

C-Overall-RS

MicroMax NS Cool

Suit

Preshrunk Cotton Coverall (Measurement : inch)

S

M

L

XL

2XL

3XL

Tolerance

Total Length

58

60

61

64

67

68

±0.5

Chest

44

47

50

52

54

58

±0.5

Shoulder

19

19

20

21

22

23

±0.5

Sleeve

22

22

22

23

24

24

±0.5

Cuff of Sleeve

5

5

5

5.5

5.5

5.5

±0.5

Collar

17

17

17

17

18

18

±0.5

Hip 48 50 52 55 58 61 ±0.5

Waist 32 34 36 38 42 46 ±0.5

Crotch 31 31 32 32 33 33 ±0.5

Inseam 27 28 28 30 30 30 ±0.5

Cuff of Pants 7.5 8 8.5 9 9.5 10 ±0.5

Body Protection

Smock (Measurement : inch)

S

M

L

XL

2XL

3XL

Tolerance

Chest

42

44

46

48

50

52

±0.5

Shoulder

15.5

16.5

17.5

18.5

19.5

20.5

±0.5

Sleeve Length

23

24

25

26

26

27

±0.5

Cuff(Elastic)

8 8 8 8 8 8 ±0.5

Total Length

38

40

42

44

47

50

±0.5

Jumpsuit (Measurement : inch)

S

M

L

XL

2XL

3XL

Tolerance

Chest

40

42

45

48

49.5

52

±0.5

Shoulder

15.5

16.5

17.5

18.5

19.5

20.5

±0.5

Sleeve Length

23

24

25

27

27

27

±0.5

Cuff(Elastic)

8 8 8 8 8 8 ±0.5

Waist(Fabric)(Elastic)

3929.5

4132

4334

4638

48.539.5

5042

±0.5±0.5

Hip

40

42

45

48

49.5

49.5

±0.5

Total Length

58

60

63

64

66

68

±0.5

SAFETYWARE Apron

SAFETYWARE Cleanroom ApparelsAPR-VINYL-C

CA-2SN-HPFZX

CA-5CN-XPXZX

Vinyl Coat Apron (Measurement : inch)

S

M

L

XL

2XL

Tolerance

Back Length

47

48

48.5

49

49.5

±0.5

Chest

38

40

44

48

52

±0.5

Sleeve Length

22

22

23

23

24

±0.5

Shoulder

19

20

22

24

26

±0.5


SAFETYWARE Safety Vest

Safety Vest (Measurement : inch)

S

M

L XL 2XL

3XL

4XL

5XL Tolerance

Back Length

25

26

26.5

27

28

28.5

29.5

29.5

±0.5

Chest

43

46

50

52

54

55.5

57

59

±0.5

Shoulder

15

16

16.5

17

17.5

18.5

19.5

20.5

±0.5SV-4R-4KZY

Body Protection

Jacket (Measurement : inch)

S

M

L

XL

2XL

3XL

4XL

5XL

Tolerance

Back Length

27

27.5

28

28.5

29

30

31

31

±0.5

Chest

47

48.5

50

51.5

53

54.5

56

57.5

±0.5

Shoulder

18

19

20

21

22

23

24

25

±0.5

Sleeve Length

22.5

23

24

24.5

25

25.5

26

26.5

±0.5

Cuff of Sleeve

4.5

4.5

5

5

5

5

5.5

5.5

±0.5

Collar

16.25

17.75

18.5

18.5

18.75

19.5

20.25

22

±0.5

Pants (Measurement : inch)

XS

S

M L

XL

2XL

3XL

4XL

5XL

Tolerance

Waist

28

30

32

34

36

38

40

44

48

±0.5

Crotch

27

27

28

28

29

29

30

30

30

±0.5

Inseam

27.5

29

29

29.25

30

31.5

32

32

32

±0.5

Hip

42.5

44

45

46

48

48

51

52.5

54

±0.5

Leg Length

39

39

40

41

42

43

44

44

44

±0.5

Cuff of Pants

8.25

8.25

8.5

9

9.5

9.5

9.5

9.75

10.5

±0.5

SAFETYWARE Chemical Resistant Jacket

SAFETYWARE Chemical Resistant Pants

C1-2AG-XXB


C1-3AG-XZ

SAFETYWARE Flame Retardant Coverall

F1-1ANB-PCFBSZ

Flame Retardant Cotton Coverall (Measurement : inch)

S

M

L

XL

2XL

3XL

Tolerance

Total Length

58

60

61

64

67

68

±0.5

Chest

44

47

50

52

54

58

±0.5

Shoulder

19

19

20

21

22

23

±0.5

Sleeve

22

22

22

23

24

24

±0.5

Cuff of Sleeve

5

5

5

5.5

5.5

5.5

±0.5

Collar

17

17

17

17

18

18

±0.5

Hip 48 50 52 55 58 61 ±0.5

Waist 32 34 36 38 42 46 ±0.5

Crotch 31 31 32 32 33 33 ±0.5

Inseam 27 28 28 30 30 30 ±0.5

Cuff of Pants 7.5 8 8.5 9 9.5 10 ±0.5

Body Protection

Aprons

At Safetyware, we offer complete range of aprons made of various materials for practically every applications. Aprons manufactured by world renowned manufacturers such as Ansell, or custom made aprons can be supplied according to your requirement and specification. All aprons provide varying degree of protection against dirts, abrasions, cuts, snags and punctures. For more specific purpose such as protection against chemical, sparks or heat, please refer to the table below for more information.

Protection against liquid & chemical splash, animal fats, oil and greasesAPR-PE3243 SAFETYWARE Disposable PE Aprons White 32" x 43" * * bag of 100 pcsAPR-PE3255 SAFETYWARE Disposable PE Aprons White 32" x 55" * * bag of 100 pcs

APR-PVC2436/LD SAFETYWARE Light Duty Vinyl Apron Translucent 24" x 36" ** ** pcAPR-PVC2448/LD SAFETYWARE Light Duty Vinyl Apron Translucent 24" x 48" ** ** pcAPR-PVC3545/LD SAFETYWARE Blue PVC Apron Blue 35'' x 45'' ** ** pcAPR-PVC3543/MD SAFETYWARE Blue PVC/Nylon Apron Blue 35" x 43" ** *** pcAPR-PVC2448/HD SAFETYWARE Heavy Duty PVC Apron Black 24” x 48” *** **** pcAPR-VINYL-C SAFETYWARE Vinyl Coat Apron Translucent S – XL ** ** pcAPR-NBR3545 SAFETYWARE Heavy Duty Nitrile Apron Black 35” x 45” **** **** pc

56-100 ANSELL CPP Heavy Duty PVC Apron Green 35” x 45” *** **** pc56-101 ANSELL CPP Heavy Duty PVC Apron White 35” x 50” *** **** pc

SSA NORTH Silver Shield Bib Apron Silver 35” x 45” ***** * pcSSCA NORTH Silver Shield Coat Apron Silver S – XL ***** * pc

Art. No. Description Color Size Chemical Mechanical Unit Protection Protection

APR-PE3255 APR-PVC2436/LD

APR-VINYL-C

APR-PVC2448/HD

APR-NBR3545

APR-PVC3543/MD

SSA SSCA56-101

***** Excellent **** Good *** Moderate ** Below Average * Poor n/a = Not Applicable

Rating

APR-PVC3545/LD


Body Protection

Aprons

SA-AAS-2448 APR-CVS2436 APR-TCD2436-NBAPR-FLTH2436APR-SLTH2436 SA-CRYO-A2436 SA-AKV-243644-7142

At Safetyware, we offer complete range of aprons made of various materials for practically every applications. Custom made aprons can be supplied according to your requirement and specification. All aprons provide varying degree of protection against dirts, abrasions, cuts, snags and punctures. For more specific purpose such as protection against chemical, sparks or heat, please refer to the table below for more information.

Protection against heat and sparksAPR-SLTH2436 Split Leather Apron Grey 24” x 36” n/a **** pcAPR-FLTH2436 Furniture Leather Apron Assorted 24” x 36” n/a **** pcAPR-PU2436 PU Apron with front Pocket Black 24” x 36” n/a *** pc44-7142 WELDAS STEERSOtuff Leather Apron Lava Brown 32” x 42” n/a ***** pcSA-AAS-2436 SAFETYWARE Aluminized Acrysil Bib Apron Silver 24” x 36” n/a **** pcSA-AAS-2448 SAFETYWARE Aluminized Acrysil Bib Apron Silver 24” x 48” n/a **** pc

Protection against extreme low temperature (waterproof) (Note: Aprons are not for immersion in liquid cryogens)SA-CRYO-A2436 SAFETYWARE Cryogenic Bib Apron Blue 24” x 36” ** ** pcSA-CRYO-A2442 SAFETYWARE Cryogenic Bib Apron Blue 24” x 42” ** ** pcSA-CRYO-A2448 SAFETYWARE Cryogenic Bib Apron Blue 24” x 48” ** ** pc

General protection against dirts, abrasions, cuts, snags and puncturesSA-AKV-2436 SAFETYWARE Kevlar Twill Bib Apron Yellow 24” x 36” n/a ***** pcAPR-CVS2436 SAFETYWARE Canvas Apron Beige 24” x 36” n/a *** pcAPR-TCD2436-NB SAFETYWARE Cotton TC Drill Apron White, Blue, Beige, Grey 24” x 36” n/a *** pcAPR-TCD2436-1P-NB SAFETYWARE Cotton TC Drill Apron /w White, Blue, Beige 24” x 36” n/a *** pc

1 pocket

Art. No. Description Color Size Chemical Mechanical Unit Protection Protection

***** Excellent **** Good *** Moderate ** Below Average * Poor n/a = Not Applicable

Rating

SHVRC Reflective Heavy Duty PVC Raincoat (1-piece) M – XXL pcSHVRS Reflective Heavy Duty Rainsuit (2-piece – Jacket & Pants) M – XXL suit

Made with PVC/Polyester coated fabric which is durable, lightweight & comfortable to wear. The rainwear are sewn with 50mm (width) silver reflective tape which makes the apparel highly visible especially at night. The bright sateen yellow color further enhances the visibility of the wearer and provides added safety. Available in 1-piece long coat style (model SHVRC) or 2-piece Jacket & Pants style (model SHVRS).

SAFETYWARE Rainwear

SHVRC SHVRS

APR-PU2436


General Purpose Apparels

Art. No. Description Size Unit

Body Protection

General Purpose Apparels

Non-Woven Polypropylene (PP) Coverall with HoodNon-woven coveralls (NWCVL-H) is made of economical white Polypropylene while NWCVL-H-PE is made of economical white Polypropylene with PE Coated. Coveralls protect a person from all pesticides, harmful chemicals and other materials which can harm the body while working or just simply doing something a bit risky. The use of disposable coveralls has proven its usefulness and helpfulness to people who works in an industrial company, construction company, dust-proof workshop or just simply a person who paints homes. They are breathable for body, it has given them the protection they needed and to avoid injuries or accidents that can usually happen without any protective gears on, protection against dusts, herbicides, pesticides and other hazardous materials. It also can prevent pollution and the surface of theses clothes without stains, have good tensile strength, anti-static and non-toxic. Features of PE Coated non-woven coverall is waterproof and it is suitable to use in food processing applications, home textile, hospital, agriculture, hygiene and garment industry.

NWCVL-H Disposable White Non-woven Coverall /w Hood M – XL pcNWCVL-H-PE Disposable White Non-woven Coverall /w Hood & PE Coating. M – XL pc ISOGOWN Disposable Isolation Gown (Thick) Free bag


Coverall are made of 100% preshrunk cotton with reflective stripes. It features brass zipper & Velcro, two large double chest pockets, elastic waist, Velcro fasteners at cuff. Suitable for general purpose industrial applications. It offers good comfort, dexterity, durability and enhanced visibility due to the reflective stripes. Colors available are Orange, Red, Royal Blue, Navy Blue, White and Yellow.

100% Preshrunk Cotton Coverall c/w Reflective Stripes

C-Overall-RS Cotton Coverall /w Reflective Stripes S – 3XL pcArt. No. Description Size Unit

100% Cotton CoverallPerfect to wear for general purpose industrial applications. The 100% Cotton material offers good comfort, dexterity and performance. Two large double chest pockets and banded collar for enhanced appearance. Brass zipper and Velcro. Velcro fasteners at cuff and elastic waist for better fit. Two standard colors are available – Navy Blue and Sky Blue. Other special made color include Red, Orange, & Yellow.

Art. No. Description Size UnitC-Overall General Purpose Cotton Overall S – 3XL pc

NWCVL-H NWCVL-H-PE

Without PE Coating With PE Coating

Workwear

Workwear We can custom make a variety of clothing by using a variety of material which include T/C and polyester. Whether you are looking for t'shirt, shirt, lab coat, pants, skirts or any other type of uniforms, we can tailor make them in accordance to your requirement. Printing or embroidery can be added on the clothing upon request. Please contact our customer service representatives for more details.

T'Shirt Shirt Lab Coat

ISOGOWN


Disposable Isolation GownDisposable Isolation Gown is made of non-woven 30 gram of polypropylene with neck and waist ties to ensure gown remains securely in place. It is breathable and the lightweight material that keeps you cool in hot environments. This ISOGOWN is very good in protection from light splashes and particulates. Ideal for students in medical and dental school. It comes with 10 pieces per bag.

Body Protection

A range of high visibility clothing are available to suit different requirements. All these safety vest features are provided thanks to the input of tens of thousands of law enforcement professional and public safety specialist throughout the years. The economical SV-2R-2MVY and SV-2R-2MVO are made with polyester mesh material with Velcro closure which provide good air permeability. Whereas model SV-4R-1KZY and SV-4R-1KZO are made with thicker polyester tricot material with zipper closure which are designed to be more durable. The feature of SV-CD-1MVY is designed to help to keep you from being pulled into harm's way by featuring shoulders, side seams and a front closure that break away if the safety vest get entangled in machinery, hooked on a vehicle or snagged by a tool made of polyester mesh material, the wearer will be comfortable all day. These safety vest are in light weight, hard wearing usage and washable.

SAFETYWARE High Visibility Safety Vests

SV-2R-4MVY SV-2R-4MVO SV-2R-1KZY SV-2R-1KZO

Your Art No. : SV- - / Step 1 - 2 + 3 + 4 + 5 / 6

SV-CD-1MVY** Remark : 4R with Velcro at shoulder and side body

Example : (SV - 1R - 2KVO / S )Step 1 : Number of Reflective Stripes1R 1 Horizontal 2R 2 Horizontal3R 1 Horizontal + 2 Vertical 4R 2 Horizontal + 2 Vertical CD Custom Design

Step 2 : Type of Reflective Stripes0 Without Reflective Tape

1 2-inch W-Style White PVC Reflective Tape

2 2-inch W-Style Yellow PVC Reflective Tape 3 2-inch W-Style Orange PVC Reflective Tape 4 2-inch Silver Reflective Tape (Polyester

Back) 5 2-inch 3M 8906 Reflective Tape

Step 3 : MaterialK Polyester Knit (Tricot)

M Polyester Mesh

SV-1R-1KZY SV-4R-1KZY SV-4R-1KZO SV-4R-4KZY

Art Number - Safety Vest :

Remark : For Custom Made item, please attach photo for us when you place order.

Safety Vest


Step 4 : Closure V Velcro Z Zipper

Step 5 : ColorY Yellow O Orange

Step 6 : Size SMLXL2XL3XL4XL5XL

Body Protection


ChemMAX and Interceptor Permeation Rate

Body Protection

LAKELAND ChemMAX® 3 Coverall Durable and lightweight, ChemMax® 3 provides a barrier against a broad spectrum of toxic industrial chemicals, dual use chemicals, chemical warfare agents and other harmful contaminants. The multi-layer film is applied to a heavy polypropylene nonwoven for increased strength and durability. The barrier film is significantly softer than other products on the market, resulting in a quiet, more comfortable garment.

C5428 LAKELAND ChemMAX® 1 Chemical Protective Coverall Yellow S – 3XL pc

CT3S428E LAKELAND ChemMAX® 3 Chemical Protective Coverall Grey, Orange S – 3XL pc

Art. No. Description Color Size Unit

TYPE 3 & 4 Protection

Chemical Protection Apparels

MicroTex Type 5 & 6 Chemical Protective Coverall


The fabric used in the manufacture for MicroTex coveralls is 65gsm, soft, durable, breathable and antistatic imported Korean polypropylene+ microporus film material. Seams are over-locked to a standard 7+/- stitches per inch. The hood, wrists, & ankles are elasticized, and heavy duty zipper cover flap with self-adhesive tape & serge stitching way.

MicroTex MicroTex Type 5 & 6 Chemical Protective Coverall M -- 2XL pc

ChemMAX®1 is a lightweight, disposable cost effective chemical suit for protection against splashes and sprays of hazardous chemicals. The high density polyethylene film barrier laminated to spunbond polypropylene substrate. It constructed with stitched and taped seams for superior protection and strength. The double zip / storm flap front fastening for improved protection and quick and easy donning and removal.

LAKELAND ChemMAX® 1 Coverall

TYPE 5 & 6 Protection

C5428 CT3S428E


AMNC428E MicroMAX NS Cool Suit M – 2XL pc


MicroMAX NS Cool Suit is a type 5 & 6 limited use protective coverall that offers the best of protection with a high level of comfort derived from breath ability. The back of the coverall features a large panel of highly breathable Safegard® 76 material-in blue for easy identification. This enables the suit to breath easily, making MicroMAX NS Cool Suit comfortable in the warmest of working environments. MircroMAX NS Cool Suit is constructed using blue bound seams for superior strength properties and improved particle and liquid repellency at the seams.

MicroMAX NS Cool Suit

Body Protection

Chemical Protection Apparels

LAKELAND Interceptor Chemical Protective SuitsInterceptor® is the apex of Lakeland Industries chemical protective clothing line. Manufactured to both NFPA 1991 and CE type 1 requirements and available in encapsulating and non-encapsulating configurations there is an Interceptor® suit for your needs be it gas, vapor, aerosol, liquid, or particulate protection. Interceptor® offers dependable protection, superior performance and patented garment features that have been proven over a broad range of chemical challenges in a wide range of environments.

ICT130 ICT640 ICT645A

Art. No. Description Size Packing UnitICT130 LAKELAND Interceptor Protective Coverall S – 5XL 1 suit /case case

** Coverall, hood, elastic face and wrists, ankles.

ICT450 (rear entry) LAKELAND Interceptor Level B Encapsulated Suit S – 5XL 1 suit /case suit** Expanded back, 48” zipper, storm flap.** Comes with 20mil PVC face shield, elastic wrists, 2 exhaust ports with shroud and attached sock boots with boot flaps.

ICT650 (front entry) LAKELAND Interceptor Level A Deluxe Fully Encapsulated Suit S – 5XL 1 suit /case suitICT640 (rear entry) ** Expanded back, sealed seam plus inside and out, 48” gas tight zipper,

double storm flap with hook and loop closure.** Comes with 2 layer face shield (10mil Teflon / 40mil PVC), Anti-reversing gloves Butyl, North Silvershield, 2 exhaust valves and attached sock boots with boot flaps.** 1.5” waist belt with 3 belt loops sewn (inside) and sealed.** Storage bag included.

ICT645A (front entry) LAKELAND Interceptor Level A Fully Encapsulated Suit S – 5XL 1 suit /case suit** Double storm flap with hook and loop closure.** Comes with 2 layer face shield (10mil Teflon / 40mil PVC), 3 layer glove combination of Butyl, North Silvershield and outer knit Kevlar, 3 exhaust valves and attached sock boots with boot flaps.** 1.5” waist belt with 3 belt loops sewn (inside) and sealed.** Include aluminized fiberglass overcover, storage bag and Hazmax boot.

Level A Protection

Level A Protection

LAKELAND Interceptor Training SuitsThe training suit offers an economical way to learn the do's and dont's of hazmat procedures. The training suit is for training use only and do not offer any protection in Level A or B hazmat environment.

95494 (rear entry) LAKELAND 95494 Encapsulated Training Suit S – XL suit95493 (front entry) LAKELAND 95493 Encapsulated Training Suit S – XL suit

Art. No. Description Size UnitTHIS SUIT IS FOR TRAINING IN LEVEL A PROCEDURES ONLY!DO NOT USE IN ACTUAL LEVEL A HAZMAT ENVIRONMENTS.


ICT450

Body Protection

Metal Mesh ClothingNIROFLEX Metal Mesh ClothingMetal mesh clothing provides superior body protection against cuts and punctures to the chest, stomach and torso. A full range of aprons, sleeves, vests, shirts, pants and tunics are tunics are available in a wide variety of sizes and styles. Made with stainless steel with super-strong 7.0mm diameter ring.

Art. No. Description Size UnitS7-12SS Short Mesh Vest with Double Mesh Sleeves S – XL pcS7-28S Single Full Arm Mesh Sleeve S – XL pcS7-28SS Double Full Arm Sleeve Set S – XL pcS7-48FR Mesh Frock, 48” Length with Full Sleeves XS – 2XL pcS7-48FRNS Mesh Frock, 48” Length with No Sleeves XS – 2XL pcS7-85B Mesh Bolero Vest, 33” Front Length, 12” Back, XS – 2XL pc

Short Shoulder Sleeve with Hip StrapS7-92P Mesh Safety Pants S – XL pcS7-100S Mesh Safety Shirt, 40” Front & Back, Long Sleeves S – XL pcS7-120M Mesh Tunic, 48” Front/Back, Long Sleeves S – XL pcS7-2534A Mesh Apron 25” x 34” pcS7-2540A Mesh Apron 25” x 40” pc

Cold Resistant Clothing

S7-85B Mesh Apron

Chainsaw Safety ApparelsELVEX ProVest & ProChaps Chainsaw Safety ApparelsELVEX ProVest is intended to offer protection from chain saw kick back injuries. The Prolar protection is provided on the shoulders and the front of the chest, while the water resistant sleeveless jacket has extended shoulders and large front and back vents. The vest is made from 420 denier nylon and has high visibility orange top and an attractive blue bottom.ELVEX ProChaps has a long list of unique features which explains the popularity of this design. The patented asymmetric design provides extended protection on the left side of each leg where most injuries occur. The chaps conform to ASTM requirements as well as APA Class A requirement. They are made of lightweight, flexible and strong 420 denier Nylon cover fabric. The size of the chaps refer to the length from waist.

JE-50 ELVEX ProVest Chainsaw Protective Vest M – XL pcJE-90 ELVEX 90 Series ProChaps Chainsaw Protective Chaps 28”, 33”, 36”, 39” pc


REFRIDWEAR CoolerWear Cold Room JacketA component for extra warmth, these lightweight garments are ideal for walk-in coolers, dairy processing, produce rooms and floral processing. Often worn under smocks or labcoats. Features smooth lightweight wind tight rip stop nylon outer shell for great durability and 7 ½ oz. Of insulation to provide light-weight warmth. Jacket has two insulated hand warmer pockets, insulated knit collar and knit cuffs. Bound inner seams and rustproof zipper ensure durability. A non-branded economical model (RS0011) is also available.

125-R REFRIDWEAR CoolerWear Cold Room Jacket S – 3XL pcRS0011 Economical Cold Room Jacket XL – 2XL pc


125-R RS0011


KEY Insulated Hooded Duck JacketsThe Insulated Hooded Duck Jackets are made of 100% cotton mid-weight water and stain repellent duck, with a medium weight bonded polyester fiberfill insulation and black taffeta lining. Recessed (dyed-to-match) knit storm cuffs with black taffeta facing and pleated back & elbows for extra comfort and ease of movement. The antique brass hardware and #8 antique brass front zipper are durable and attractive. There's plenty of pocket space with 2 lower front, outside (fleece lined) pockets and 2 interior storage pockets with Velcro® closure. The hood is 3-piece construction with fleece lining and a drawstring. All seams are triple needle stitched for added durability and include bar tacks at stress points. Locker loop included. Available in black and brown.

372.01-RG Insulated Hooded Duck Jacket Black Regular pc372.21-RG Insulated Hooded Duck Jacket Brown Regular pc275.01-RG Insulated Duck Overall Black Regular pc275.21-RG Insulated Duck Overall Brown Regular pc

Art. No. Description Color Size Unit

KEY Insulated Duck Bib OverallsInsulated Duck Bib Overalls are constructed of 100% cotton mid-weight, water and stain repellent, duck with medium weight bonded polyester fiberfill insulation. They feature black taffeta lining and durable brass hardware throughout. The two-way #8 brass leg zippers extend to the waist and the two-way #5 front zipper also includes an extended extended fabric pull far ease of use. These overalls are designed with elastic waist take-ups, exterior storm flaps (with snaps) on legs, a concealed snap at the waist and take-up snaps on back of legs. There are 2 exterior front chest pockets (with concealed zippered closures), 2 interior storage pockets with Velcro® closure and oversized back pockets that are reinforced for extra strength. Other features include double-knees and triple needle stitched seams all around for added durability. A hammer loop and a locker loop included. Available in black and brown.

275.21-RG

372.21-RG

Body Protection

Nomex IIIA Flame Retardant CoverallNomex IIIA aramid and static dissipative fiber blend helps shield the wearer from flames, flash fires and electric arcs. It is extremely durable, light weight and provides permanent flame resistance that won't wash out or wear away. It will not burn, melt or drip under high heat, offers excellent chemical resistance, and is engineered to reduce nuisance static. Available in dark green, navy blue, orange, red.


Flame-Retardant Clothing

LAKELAND Flame Retardant Cotton CoverallLakeland Flame Retardant Cotton Coverall is made from FR Cotton which can ease your concerns about the safety of your employees without causing concerns about the cost. It helps to avoid dangers of flash fire or explosion for industrial workers. Since the material is FR Cotton, it is less costly than other fabrics, providing an affordable solution. Lakeland's flame retardant coveralls have the built-in toughness that you expect from a leader in the flame resistant market. Whether you are clothing pipeline workers or linemen, these coveralls offer amazing protection and value.

NomexIIIA-150 Nomex IIIA Flame Retardant Coverall /w Five Reflective Stripes (150gm/m2) S – 5XL pcC080-NB Lakeland Flame Retardant Cotton Coverall S – 3XL pc605IND-O CHICAGO Protective 605-IND 9 oz Indura Fire Retardant Coverall S – 3XL pc


CHICAGO® Indura® UltraSoft® CoverallThe UltraSoft® line of flame resistant 88% cotton 12% high tenacity nylon fabrics, introduced in 1996, is guaranteed flame resistant for the life of the garment in either high temperature industrial or home washing procedures. The fabric is engineered to focus the excellent abrasion resistance of the nylon on the outer surface to enhance garment wear life, while the cotton fibers are focused towards the skin to optimize comfort. In addition, UltraSoft® fabrics are engineered to have an extremely soft feel to further enhance the superior comfort properties of cotton. UltraSoft® fabrics are fully flame resistant and the 12% nylon actually enhances the protective performance in some cases, such as electric arc and flash fire exposures.

Bee keeper Suit

Bee keeper SuitOur newest Protective Bee Suit made with full vision & breathable wirenet shield, waterproof and alkali resistant PVC coated fabric. The garment is in orange color, make it highly visible and easily seen. It offers high comfort and rugged quality. The design of back opening with heavy duty zipper allows easy access and easy on and off for wearer. The gloves are made of PVC coated fabric and reinforced leather palm for long lasting performance.

Art. No. Description Size UnitMKF-09 Bee keeper Suit S – XL pc

605IND-OFRC-Overall NomexIIIA-150

Body Protection

Safety Apparels

Your Art No. for : - - /

Example : C1-2AG-PPSB/L (Jacket ) ; C1-3AG-BPZ/L (Pants) ; C1-1AG-PCFBSZ/L (Coverall)

Step 1 : Type and MaterialC1 - Chemical Resistant (Material = 100% Polyester, Weight = 256gsm)F1 - Flame Retardant (Material = 80% Modacrylic + 19% Cotton + 1% Antistatic Fiber, Weight = 215gsm)F2 - Flame Retardant (Material = 93% Meta Aramid + 5% Para Aramid + 2% Antistatic Fiber, Weight = 150gsm)A1 - ARC Flash Protection (Material = 60% Modacrylic + 34% Cotton + 5% Nylon + 1% Antistatic Fiber, Weight = 260gsm)M1 - Molten Splash Protection (Material = 30% Wool + 50% FR Viscose + 20% Nylon, Weight = 310gsm)TC - Tetron Cotton (Non Safety)

Step 2 : Pattern1 Coverall2 Jacket3 Pants4 Custom Design

Step 3 : Option To Add 3M 8935 Flame Retardant Reflective StripesA Without Reflective StripesB 1 Reflective Stripes At BackC 5 Reflective Stripes (1 At Back, 2 At Arm, 2 At Leg)

Step 4 : ColorW WhiteG GreyO OrangeR RedNB Navy BlueLB Light BlueOG Olive Green

Step 5A : Pocket (For Coverall - Upper Body & Jacket)PC Patch Pocket with CoverPP Patch PocketHP Hidden PocketS Side PocketX Without Pocket

Step 5B : Pocket (For Coverall - Lower Body & Pants)S Side PocketBP Back Patch PocketFB Front Side Pocket & Back Patch PocketX Without Pocket

Art Number – Safety Apparel :

Remark : For Custom Made item, please attach photo or specify the pattern for us when you place order.

Step 1 - 2 + 3 + 4 - 5 A + 6 + 7 / 8 SAFETYWARE CR-Pro™Chemical Resistant ApparelsSAFETYWARE CR-Pro™ Chemical Resistant Apparels is made with 100% Polyester that can resist most type of dangerous chemicals and harmful particles. It's perfect to wear for chemical industries. It design to offer good comfort, dexterity, durability and performance. This chemical resistant apparel is light weight, washable and hard wearing usage.

SAFETYWARE FR-Pro™ Flame Retardant ApparelsSAFETYWARE FR-Pro™ Flame Retardant Apparels suits jobs and locations where there are flame, heat emissions or fire hazards. Made with specially PimaSafe Fabric which can be unlimited commercial laundry. It is comfortable, soft and comfort, breathable and offer excellent to dissipate body heat. Available in navy blue.

SAFETYWARE AF-Pro™ ARC Flash Protection ApparelsSAFETYWARE AF-Pro™ Apparel is designed to protect you from an unexpected electrical arc flash incident. They are made with 60% Modacrylic, 34% Cotton, 5% Nylon and 1% Antistatic Fiber. The fabric is tested and achieved ATPV rating of 8-1 and EBT rating of 9-3.

SAFETYWARE MS-Pro™ Molten Splash Protection ApparelsSAFETYWARE MS-Pro™ Molten Splash Protection Apparels provides all that molten splash and radiant heat work demand plus some additional features. MS-Pro™ Apparel have full roomy cut for non-binding comfort and to allow air to circulate. Our double safety lock stitch seams provide superior strength and protection thanks to a seam design that hides our unique stainless steel kevlar thread under the fabric to prevent premature thread burn-out. The stand-up collar helps protect the neck and the storm flap closure prevent molten splash entry. The thermally isolated dome snaps prevent hot snap burns. Our sleeve cuffs can be worn over gloves and allow easy removal of hand protection.

Chemical Resistant Jacket + Pants

Flame RetardantJacket + Pants

Arc Flash Coverall Arc FlashJacket + Pants

Molten Splash Coverall Molten SplashJacket + Pants

Step 6 : Pen Holder F Front (Left)S Side (Left)X Without Pen Holder

Step 7 : ClosureV VelcroB ButtonZ ZipE Elastic (Only for pants)

Step 8 : SizeXS S M L XL 2XL3XL 4XL 5XL

Your Art No. for Pants : - - / Step 1 - 2 + 3 + 4 - 5B + 7 / 8

Jacket

Your Art No. for : - - / Step 1 - 2 + 3 + 4 - 5A+5B+6+7 / 8 Coverall


Material

Color Available / Lead TimeColor

Without MOQ

Product Lead Time

Color With MOQ 300pcs/Order Product Lead Time

C1 Grey

4-6 weeks, otherwise

11-16 weeks if out of

stock

White, Orange, Red, Navy Blue, Light Blue, Olive Green

11-16 weeks

F1 Navy Blue White, Grey, Orange, Red, Light Blue, Olive Green

F2 - White, Grey, Orange, Red, Navy Blue, Light Blue, Olive Green

A1 - White, Grey, Orange, Red, Navy Blue, Light Blue, Olive Green

M1 - White, Grey, Orange, Red, Navy Blue, Light Blue, Olive Green

TC White Grey, Orange, Red, Navy Blue, Light Blue, Olive Green

Body Protection

Heat Resistant Apparels

SAFETYWARE Aluminized Fire Approach and Proximity SuitsSAFETYWARE Fire Approach Suits are designed for ambient temperatures of no greater than 100°C with additional radiant heat protection of up to 1600°C. The fire approach suits, while providing approximately 95 percent heat reflectivity, are unlined. SAFETYWARE Fire Proximity Suits are designed for extreme radiant heat conditions of up to 1600°C, where exposure to hot liquids or steam is possible. Our proximity suits feature a unique, quilted NOMEX and Neoprene coated T/C liner, which serves as an excellent vapor barrier and heat insulator. All Fire Approach & Proximity Suits are designed as a 2-piece coverall style with hood, gloves & overshoes. The standard hard-hat style, fiberglass-shell headgear features a 7 by 11-inch panoramic faceshield with a mylar gold-film-cover that locks on with an aluminum bracket.

Fire Approach SuitsSA-CFB01-AP SAFETYWARE 14.5 oz. Aluminized Fiberglass Fire Approach Suit suit

SA-CPF01-AP SAFETYWARE 7 oz. Aluminized PBI/KEVLAR Fire Approach Suit suit

Fire Proximity SuitsSA-CFB01-PX SAFETYWARE 14.5 oz. Aluminized Fiberglass Lined Fire Proximity Suit suit

with quilted Nomex & Neoprene coated T/C liner

SA-CPF01-PX SAFETYWARE 7 oz. PBI/KEVLAR Lined Fire Proximity Suit suitwith quilted Nomex & Neoprene coated T/C liner

Art. No. Description Unit

SAFETYWARE Aluminized Coats & PantsSAFETYWARE Aluminized Coats & Pants are made to provide exceptional protection against radiant heat in the harshest industrial applications. The coats & pants are available in several styles with different base material, lengths & sizes. All the products are custom made in USA in accordance to your required specification.

SA-CAS SAFETYWARE 16 oz. Aluminized Acrysil Coat 30”, 40”, 50” S – 2XL pcSA-CNJ SAFETYWARE 13 oz. Aluminized Norbest Coat 30”, 40”, 50” S – 2XL pc

SA-JAS-15 SAFETYWARE 16 oz. Aluminized Acrysil Half Jacket 15” S – 2XL pcSA-JNJ-15 SAFETYWARE 13 oz. Aluminized Norbest Half Jacket 15” S – 2XL pc

SA-PAS SAFETYWARE 16 oz. Aluminized Acrysil Pants 29”, 32”, 34” S – 2XL pcSA-PNJ SAFETYWARE 13 oz. Aluminized Norbest Pants 29”, 32”, 34” S – 2XL pc

SA-L01TAVC-SS/RG SAFETYWARE 19 oz Aluminized Thermobest Spat with Velcro Closure Regular pairSA-L02TAVC-SS/RG SAFETYWARE 19 oz Aluminized Thermobest Legging with Velcro Closure Regular pairSA-L03TARS-SS/LG SAFETYWARE 19 oz. Aluminized Thermobest Spring Steel Framed Legging Large pair

Art. No. Description Length Size Unit

SA-CAS SA-JNJ-15 SA-PAS

SA-L01TAVC-SS/RG

SA-L02TAVC-SS/RG


Body Protection

Welding Safety – Apparels

WELDAS STEERSOtuff Lava Brown Leather Sleeves

44-7023 Lava Brown Leather Sleeves pairArt. No. Description Unit

The STEERSOtuff leather sleeves are designed with an innovative over-the-shoulder hanging system for a comfortable fit. It is for arm and shoulder protection. This system consist of a 1” elastic strap, divider and adjustable slider. It eliminates the discomfort of the traditional strapping systems that go around the neck. The cuffs are adjustable with insulated snaps.

23”

Front Back

The STEERSOtuff Lava Brown Leather Jacket offers excellent heat and flame resistant and is made from durable and pliable side split cowhide. All leather seams are double lock stitched with high strength, high heat resistant, 5 ply KEVLAR® thread. All stress points are riveted or double leather reinforced. All rivets and snaps have electrical insulation for safety. Also available with FR Cotton Back style.

WELDAS STEERSOtuff Lava Brown Leather Jacket

44-7300 Lava Brown Leather Jacket pc44-7530 Lava Brown Leather Jacket /w FR Cotton Back pc


WELDAS STEERSOtuff Lava Brown Leather Leg Length Spat

The Velcro is Flame Retardant

The STEERSOtuff legging spats are designed for easy wearing and complete protection. The fasteners are made with trim-to-fit Velcro to fit different leg or shoe sizes. The 15 cm length legging spat comes with a under shoe elastic strap to secure shoe top cover.

44-7106 Lava Brown Leather Leg Length Spat pairArt. No. Description Unit

WELDAS STEERSOtuff Lava Brown Leather ChapsThe STEERSOtuff leather chaps consist of a waist strap that is adjustable from 80 cm to 102 cm. The tigh, knee and leg straps are fitted with adjustable snap fasteners. It is made with Grade-A cow side split leather.

44-7440 Lava Brown Leather Chaps pc

WELDAS STEERSOtuff Lava Brown Leather ApronThe STEERSOtuff leather apron made of Grade-A cow side split leather with length of 42” (106cm). The tigh, knee and leg straps are fitted with adjustable snap fasteners.

44-7142 Lava Brown Leather Apron pcArt. No. Description Unit


102c

m

44-7300 44-7530


Body Protection

Welding Safety – Gloves

WELDAS COMFOflex 35cm Premium Full Leather Gloves

10-2000/L COMFOflex Premium Full Leather Gloves pairArt. No. Description Unit

The 10-2000 glove is made of an A-grade cow side split leather. WELDAS “Glove 2000” is an innovative 35 cm length glove with an outer shell made out of the finest durable and pliable, heat resistant side split cowhide. It also features the WELDAS “Wide Body” pattern, continuous welted seams, patented COMFOflex lining, patented reinforced palm and thumb sewn with 5 ply KEVLAR® thread, and all other seams are sewn with 4 ply KEVLAR® thread. Complies with EN 12477 (09.2005) TYPE A.

WELDAS COMFOflex Wool Lined High Heat Resistant Leather Gloves

10-2900/L COMFOflex Wool Lined High Heat Resistant Gloves pairArt. No. Description Unit

The STEERSOtuff welding glove is designed for increasing productivity on high heat welding processes. It can allow the weld time to extend further than an ordinary welding glove. The different layers move independently, thus allowing minimal effort to open and close the welder’s hand. This 36 cm length glove has an inner cuff lined with a flame retardant fabric for extra safety. The outer shell provides flame and mechanical resistance. The wool layer provides a heat barrier. While the COMFOflex lining provides comfort. It is 4 ply Dupont KEVLAR® sewn and the thumb is reinforced with a thumb strap for extra durability. Complies with EN 12477 (09.2005) TYPE A.

35cm

36cm

Split Cowhide

Wool

COMFOflex

Hea

t

WELDAS Softouch TIG Leather Gloves

10-1009/L Softouch TIG Full Leather Gloves pairArt. No. Description Unit

The 10-1009 glove is made of goat skin and the cuff is made of split cow leather. WELDAS TIG Glove 10-1009 is very smooth and has an excellent feeling. It is an innovative 35 cm length glove with electrostatic tested. Complies with EN 12477(09.2005) TYPE B.

35cm

5 x Magnification

WELDAS LAVAshield Welding Screens

55-6468 Orange/Red LAVAshield Welding Screen (6ft x 8ft) pc55-8668 Combo Frame (6ft x 6ft, adjustable to 6ft x 8ft) pc


Weldas LAVAshield welding screens are made with a specially formulated vinyl, 0.4 mm. thick. All screens are Ultrasonic welded edge and have grommets with 30 cm. intervals. Nylon ties are furnished for convenience and secure fastening to the quick connection Weldas frame. The Weldas LAVAshield welding screens are manufactured and certified according to EN 1598.

Actual color of the Welding Screen (55-6168)

Photo of the assembled Panel/Combo Frame

WELDAS General Purpose Welding GlovesThe Weldas quality general purpose welding gloves are made of heat and flame resistant shoulder split cowhide. The standard features of these gloves include a sock lining for added comfort and kevlar stitching with welted seams for added durability.

10-0328 WELDAS 13.5'' General Purpose Welding Gloves, pairRusset Straight-Thumb


13.5

”


Body Protection

The Fire Fighting Apparel Kit is specially tailored to fulfill the requirement of industrial sectors. All the components in the kit are carefully sourced from some of the world's biggest brand names in the fire protection industry. All components are certified to international safety standards which include US NFPA and European CE. The fire fighting apparel kit comes with a water-resistant nylon bag.

Fire Fighting Apparel Kit

Art. No. Description Color Available Size Unit

● Safety Standards: Complies with European EN443 standards for protective helmet for fire fighters. ● Helmet's Shell: Flame retardant material with oval shape, smooth exterior surface & interior ventilation channel. ● Interior Basket: Head size & shape adjustment (from 52 to 63cm). With special lining which prevent skin irritation.● Chinstrap: Quick release snap connection.● Face Protector: Retractable visor offers face protection against elevated temperatures & mechanical impacts.● Neck Protection: Made of genuine leather.● Exterior: With reflective and luminescent stripes.

FIREMEN HELMET

Economy, compliance and comfort in one hood. Meets or exceeds current hood requirements of NPFA 1971 Standard on Protective Ensemble for Structural Firefighting. Outer shell and lining are a blend of Nomex and Lenzing FR Rayon.

FIREMEN HOOD FIREMEN GLOVESThis 3-layer glove provides outstanding comfort and fit with tailored patterns to maximize fingertip contact & control. The inner layer of flame resistant knitted fabric insulates hands from heat and cold while the unique Crosstech® glove insert provides penetration resistance against blood, body fluids, and NFPA common chemicals. A premium leather outer shell offers maximum protection from heat and abrasion. Lock stitched with Kevlar® thread, it complies the requirements of NFPA 1971 standard.

FIREMEN BOOTS● Complies with European EN345-2 Standard.● Electrical Shock Resistant – Meets CSA-Z195-02 Standard.● Resistance to Hot Contact – Meets both NFPA and European EN345-2 Standards.● Steel Toe Cap and Steel Midsole Plate which meet European EN345 and CSA-Z195-02 Standards respectively.● Flame Retardant Upper with Heat & Oil Resistant Anti-Slip Sole.● Ozone / UV Resistant.● Heavy Canvas Lining.● Sponge Cushion Insole.● Ankle, Heel Tendon, Metatarsal and Shin Protection.● 100% Waterproof.

FIREMEN COAT & PANTS

Complete KitFFA-Kit Fire Fighting Apparel Kit kit

(Packaged with Firemen Helmet, Hood, Gloves, Coat, Pants, Boots and Metal Storage Cabinet)

Individual ComponentFF-HELMET-PAB PAB Compacta Firemen Helmet Red - pcKN-51 CHICAGO NFPA Nomex Firemen Hood White - pc80027G CHICAGO Fireguard Patriot NFPA Firemen Gloves Golden Brown - pairTK09FM01/O KANOX Fire Fighting Coat & Trousers Orange S – 2XL pc9687L HARVIK Fire Fighting Boot Yellow/Black 3.5 – 14.5 pairFFAkit-cabinet Metal Storage Cabinet for Fire Fighting Apparel Kit Red - pc


Coat● Comfortable protective collar, easy flipping up and down.● Safety throat tab secures the closure and prevents liquids from entering.● A convenient wire pocket and an inside pocket on the left chest.● Two sewed on solid pockets in the front, with reflective tapes across the body of the pockets.● Anti-wicking strips inside at the end of the sleeves and hem.● Inside collar loop for easy hanging and thumb loops on the wristlets for preventing items from entering.Trousers

● Cross braces design with adjustable braces buckles and side buckles for comfortable fixation.● Heavy duty zipper fastens the front opening. It is covered by a storm flap with hook and loop fasterner.● Extra reinforcement padding on the knees.● Anti-wicking strips inside at the end of the pant.● Inside pocket on the right hip.** All sewing threads used are fire resistant and all stress points are bartacked.

Body Protection

DFBL50 DEMRON Radiation Suit XS – 3XL suit

Cryogen Safety Apparels

SAFETYWARE Cryogen Safety ApparelsWe offer complete range of gloves and aprons for protection against cryogenic liquids and other ultra-cold environments. SAFETYWARE Cryogenic Gloves are available in water-resistant and waterproof versions and have been tested to EN 511 (European Standard for Protective Gloves Against Cold) and other test methods such as the IFTH (Lyon, France) reference method for immersion in Liquid Nitrogen – ZL0102 (waterproof style only). Aprons are made with the same waterproof materials as the gloves and provide full frontal splash protection. Note: Aprons and gloves are not for immersion in liquid cryogens.

SA-CRYO-A SAFETYWARE Cryogenic Bib Apron 36”, 42”, 48” pcSA-CRYO-GWR SAFETYWARE Cryogenic Gloves /w Water Resistant Liner 12”, 15”, 18” pairSA-CRYO-GWP SAFETYWARE Cryogenic Gloves /w Waterproof Liner 12”, 15”, 18”, 27” pair

Art. No. Description Length Unit

ARC Flash Protection KitSA-KIT2CV11 SAFETYWARE Level 2 ARC Flash Protection Kit with 12 cal/cm² Coverall kitSA-KIT2LC11 SAFETYWARE Level 2 ARC Flash Protection Kit with 12 cal/cm² Long Coat & Leggings kitSA-KIT2SC11 SAFETYWARE Level 2 ARC Flash Protection Kit with 12 cal/cm² Short Coat & Bib Overall kit

SA-KIT4LC40 SAFETYWARE Level 4 ARC Flash Protection Kit with 40 cal/cm² Long Coat & Leggings kitSA-KIT4SC40 SAFETYWARE Level 4 ARC Flash Protection Kit with 40 cal/cm² Short Coat & Bib Overall kitSA-KIT4CV50 SAFETYWARE Level 4 ARC Flash Protection Kit with 50 cal/cm² Coverall kitSA-KIT4LC50 SAFETYWARE Level 4 ARC Flash Protection Kit with 50 cal/cm² Long Coat & Leggings kitSA-KIT4SC50 SAFETYWARE Level 4 ARC Flash Protection Kit with 50 cal/cm² Short Coat & Bib Overall kit

ARC Flash Protection ApparelSA-2LG-11 SAFETYWARE Level 2 ARC Flash 12 cal/cm² Legging pcSA-2LC-4911 SAFETYWARE Level 2 ARC Flash 12 cal/cm² Long Coat pcSA-2SC-3211 SAFETYWARE Level 2 ARC Flash 12 cal/cm² Short Coat pcSA-2BO-3211 SAFETYWARE Level 2 ARC Flash 12 cal/cm² Bib Overall pcSA-2CVR-3211 SAFETYWARE Level 2 ARC Flash 12 cal/cm² Coverall (Zipper Closure) pcSA-4LG-40 SAFETYWARE Level 4 ARC Flash 40 cal/cm² Legging pcSA-4LC-4940 SAFETYWARE Level 4 ARC Flash 40 cal/cm² Long Coat pcSA-4SC-3240 SAFETYWARE Level 4 ARC Flash 40 cal/cm² Short Coat pcSA-4BO-3240 SAFETYWARE Level 4 ARC Flash 40 cal/cm² Bib Overall pcSA-4CVR-3240 SAFETYWARE Level 4 ARC Flash 40 cal/cm² Coverall (Zipper Closure) pcSA-4LG-50 SAFETYWARE Level 4 ARC Flash 50 cal/cm² Legging pcSA-4LC-4950 SAFETYWARE Level 4 ARC Flash 50 cal/cm² Long Coat pcSA-4SC-3250 SAFETYWARE Level 4 ARC Flash 50 cal/cm² Short Coat pcSA-4BO-3250 SAFETYWARE Level 4 ARC Flash 50 cal/cm² Bib Overall pcSA-4CVR-3250 SAFETYWARE Level 4 ARC Flash 50 cal/cm² Coverall (Zipper Closure) pc

SAFETYWARE ARC Flash KitsWe offer comprehensive ARC Flash protection in convenient package. The ARC Flash Kits are packaged as Level 2 and Level 4 kit. Level 2 kit is designed to offers protection of 12 cal/cm² together with Class 0 rubber insulating gloves which offers AC protection of up to 1,000 volts. Whereas Level 4 kit is designed to offer protection of 40 cal/cm2 together with Class 2 rubber insulating gloves which offers AC protection of up to 17,000 volts. All kits include garment, rubber insulating gloves, leather protector, safety helmet with ARC faceshield (Level 2 kit) or ARC Hood (Level 4 kit), as well as storage bags.


ARC Flash Protection

Level 4 Kit

Level 2 Kit

Coverall Style

DEMRON Radiation Protection SuitDEMRON Radiation Protection Suit has been tested by the Department of Energy and confirmed to be effective in shielding for various forms of ionizing radiation. It's lightweight and functional. It's constructed from a patented, highly durable polymer/fabric compound. The specific molecular engineering of the compound provides shielding against low to moderate energy gamma radiation, x-ray radiation, high and low energy beta particles and alpha particles. The DEMRON coverall is constructed with an integrated hood, heat sealed seams, and seam seal tape for added protection.


Radiation Protection

** Garment Sizes = S, M, L, XL, 2XL, 3XL.** Gloves Sizes = 8, 9, 10, 11, 12.


Body Protection

safetyware catalogs bodyprotection interetsing

Documents